Removal Of Ligands Research Articles

A Novel Approach for Apical Periodontitis Prevention Through RIPK3 Inhibition Using Organic Flavonoids

Background: Apical periodontitis (AP) entails inflammatory bone resorption facilitated by the induction of necroptosis through receptor-interacting protein kinase 3 (RIPK3). Consequently, the inhibition of RIPK3 holds the potential for favorable effects in addressing AP. A comprehensive investigation, encompassing 44 flavonoids, was undertaken to identify potential inhibitors of RIPK3. Methods: The crystal structure of the RIPK3 catalytic domain (PDB ID: 7MON) underwent meticulous preparation through the removal of ligands and energy optimization. Overall, 44 flavonoids were examined in this study. Utilizing AutoDock 4.0, molecular docking analyses were performed to evaluate the binding energies within the active site of RIPK3 concerning the examined herbal isolates, with subsequent comparison to the results obtained from a positive control inhibitor. Furthermore, the BIOVIA Discovery Studio Visualizer played a crucial role in elucidating the interactions between the top-ranked flavonoids and the residues of RIPK3. Results: Five distinct flavonoids—orientin, rutin, vicenin-2, amentoflavone, and nicotiflorin—manifested notable inhibitory effects on RIPK3, boasting inhibition constant values at either the femtomolar or picomolar scale. Notably, the first three members of this set showcased superior binding affinity to the active site of RIPK3 compared to the reference compound. Conclusion: The proposition arises that flavonoid, particularly orientin, rutin, vicenin-2, amentoflavone, and nicotiflorin, stand as promising herbal isolates for the therapeutic management of AP.

A Comprehensive Review on the Development of Titanium Complexes as Cytotoxic Agents.

After the discovery of cis-platin, the first metal-based anticancer drugs, budotitane, and titanocene dichloride entered clinical trials. These two classes of complexes were effective against those cell lines that are resistant to cis-platin and other platinum-based drugs. However, the main limitation of these complexes is their low hydrolytic stability. After these two classes, a third generation titanium based complex, i.e. diaminebis(phenolato)bis(alkoxo) titanium(IV), was invented, which showed more hydrolytic stability and high cytotoxicity than budotitane and titanocene dichloride. The Hydrolytic stability of complexes plays an important role in cytotoxicity. Earlier research showed that hydrolytically less stable complexes decompose rapidly into non-bioavailable moiety and become inactive. The mechanism of Ti(IV) complexes of diaminebis(phenolato) bis(alkoxo) is under investigation and is presumed to involve Endoplasmic Reticulum (ER) stress, which leads to apoptosis. The proposed mechanism involves the removal of ligands from the titanium complex and the binding of the Ti center to transferrin protein and its release inside the cell. Also, the structure of the ligand plays a key role in the cytotoxicity of complexes; as the bulkiness of the ligand increased, the cytotoxic nature of complexes decreased.

Activating colloidal synthesized Au catalyst by the electrochemical strategy: Gas atmosphere, electrolyte and electrochemical technique

Organic ligands are necessarily used to stabilize nanoparticles (NPs) in colloid synthesis, and the presence of these ligands in most cases can have adverse effects on heterogeneous nanocatalysis. Therefore, it is crucial to develop efficient methods to remove ligands and study the removal mechanism. In this article, we developed a combined electrochemical method (chronoamperometry (CA) + cyclic voltammetry (CV)), which can completely and efficiently remove thiol ligand from Au NPs to produce cleaned Au/C catalyst. Using the oxygen reduction reaction (ORR) activity as the evaluation criterion for ligand removal, we found that gas atmosphere (O2) plays an important role in the removal process, while the acidity and alkalinity of electrolyte have no effect on the removal efficiency. A proposed thiol ligand removal mechanism along with Au degradation is presented. The results of CA activation at an oxidation constant potential (1.7 V) indicate that oxidation of thiol alone cannot remove thiol ligand. Only if a reduction constant potential of 0.2 V is further applied, the ORR activity of Au/C catalyst will increase, indicating that both the oxidation and reduction processes of Au NPs are crucial for ligand removal. Although the CA method (with an upper potential of 1.7 V and a lower potential of 0.2 V) can efficiently remove the majority of thiol ligand, complete removal of thiol ligand requires further CV activation. Based on the relevant results, a combined electrochemical method (CA + CV) is established. Developing standardized methods for removing ligands on the surface of catalysts is important for obtaining efficient catalysts and is also important for the reproducibility of catalytic results.

Formation of Fully Stoichiometric, Oxidation-State Pure Neptunium and Plutonium Dioxides from Molecular Precursors.

Amidate-based ligands (N-(tert-butyl)isobutyramide, ITA) bind κ2 to form homoleptic, 8-coordinate complexes with tetravalent 237Np (Np(ITA)4, 1-Np) and 242Pu (Pu(ITA)4, 1-Pu). These compounds complete an isostructural series from Th, U-Pu and allow for the direct comparison between many of the early actinides with stable tetravalent oxidation states by nuclear magnetic resonance (NMR) spectroscopy and single crystal X-ray diffraction (SCXRD). The molecular precursors are subjected to controlled thermolysis under mild conditions with the exclusion of exogenous air and moisture, facilitating the removal of the volatile organic ligands and ligand byproducts. The preformed metal-oxygen bond in the precursor, as well as the metal oxidation state, are maintained through the decomposition, forming fully stoichiometric, oxidation-state pure NpO2 and PuO2. Powder X-ray diffraction (PXRD), scanning transmission electron microscopy (STEM), and energy dispersive X-ray spectroscopy (EDS) elemental mapping supported the evaluation of these high-purity materials. This chemistry is applicable to a wide range of metals, including actinides, with accessible tetravalent oxidation states, and provides a consistent route to analytical standards of importance to the field of nuclear nonproliferation, forensics, and fundamental studies.

Cu-EDTA decomplexation by UV/peracetic acid oxidation and coupled Cu recovery by alkaline precipitation: Efficiency and mechanism

The high degree of complexation between metal ions and organic ligands presents a significant challenge to their removal via conventional chemical precipitation methods. Currently, oxidative decomplexation followed by alkali precipitation of Cu2+ represents an efficacious strategy for addressing Cu-ethylenediaminetetraacetic acid (Cu-EDTA). The efficacy of activated peracetic acid (PAA) processes in degrading contaminants has demonstrated excellent performance due to their higher oxidation potential. In this study, the UV/PAA process was initially employed for Cu-EDTA decomplexation, resulting in complete removal within 30 min. The 92.41 % released Cu2+ was successfully recovered by alkaline precipitation within 90 min. The mechanism of decomplexation is comprised of two principal stages. Firstly, the UV/PAA process gradually generates reactive oxygen species (ROS), including R-C•, •OH, and 1O2. These ROS facilitate the decomplexation of Cu-EDTA, resulting in the release of Cu2+. Additionally, Cu2+ can participate in the activated PAA, further promoting the production of ROS, which in turn enhances the removal of organic ligands. Furthermore, the transformation process of Cu-EDTA was subjected to analysis, along with the decomplexation products. Meanwhile, except for HCO3−, H2PO4−, and humic acid, which exerted a relatively minor impact on Cu2+ recovery, Cl− and NO3− demonstrated a negligible influence. Moreover, the reaction exhibits enhanced efficacy under acidic conditions and demonstrates robust performance in electroplating wastewater samples. In summary, this study provided a promising method for the decomplexation of Cu-EDTA efficiently and Cu recovery.

First-Principles Calculations of the Effect of γ-Alumina Surface Hydroxyl Structures on the Location and Dechlorination of a Platinum Precursor.

The interaction between Pt precursors and alumina support is an important step in synthesizing Pt/Al2O3 catalysts, while an in-depth understanding of the interaction is still lacking. Herein, density functional theory (DFT) calculations were performed to simulate the coordination of H2PtCl6 with different surface hydroxyl groups, revealing the influence of the γ-Al2O3 surface hydroxyl structure on the position of the Pt precursor and the removal of Cl ligands. After drying, the interaction mechanism between [PtCl6]2- and alumina support involves hydrogen bonds and van der Waals forces, which are the main driving forces for the structural transformation from [PtCl6]2- coordinated with the surface hydroxyl group into the PtClx(OH)y species (OH is the γ-Al2O3 surface group). HO-μ1-AlVI and H2O-μ1-AlVI on the (100) surface with electrophilicity facilitate hauling and activating the electron-rich [PtCl6]2-, but the nucleophilic (110) surface has a weaker interaction with [PtCl6]2-. Combining free energy and electronic property analysis, the stable structures on the (100) surface after drying treatment are PtCl4(OH)2 and PtCl3(OH)3, while only PtCl4(OH)2 structures can be formed on the (110) surface. This study can deepen our understanding of the interaction mechanism between Al-hydroxyl groups and Pt precursors, providing a theoretical reference for the precise placement of Pt active phases and the construction of metal-support interfaces.

Nonequilibrium Lattice Dynamics of Individual and Attached PbSe Quantum Dots under Photoexcitation.

Quantum dot (QD) solids are emerging materials for many optoelectronic applications. To enhance interdot coupling and charge transport, surface ligands can be removed, allowing individual QDs to be attached along specific crystal orientations (termed "oriented attachment"). Optimizing the electronic and optical properties of QD solids demands a comprehensive understanding of the nanoscale energy flow in individual and attached QDs under photoexcitation. In this work, we employed ultrafast electron diffraction to directly measure how oriented attachment along ⟨100⟩ directions affects the nonequilibrium lattice dynamics of lead selenide QDs. The oriented attachment anisotropically alters the ultrafast energy relaxation along specific crystal axes. Along the ⟨100⟩ directions, both the lattice deformation and atomistic random motions are suppressed in comparison with those of individual QDs. Conversely, the effects are enhanced along the unattached ⟨111⟩ directions due to ligand removal. The oriented attachment switches the major lattice thermalization pathways from ⟨100⟩ to ⟨111⟩ directions.

General negative pressure annealing approach for creating ultra-high-loading single atom catalyst libraries

Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3–44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.

Enhancing CdSe/ZnS Quantum-Dot Light-Emitting Diode Performance: The Impact of Thermal Treatment Atmospheres on Fabrication Processes

We explored the thermal treatment impact on the performance of quantum-dot light-emitting diodes (QLEDs). The QLEDs comprised multiple layers: a 2.2-μm thick epoxy buffer layer; a bottom cathode composed of 12-nm MoOx/10-nm Ag/12-nm MoOx; a 20-nm ZnO electron transporting layer (ETL); a 10-nm CdSe/ZnS quantum dot light emission layer (EML); a 40-nm 4,4′,4″-Tris(carbazol-9-yl) triphenylamine hole transporting layer; a 10-nm WOx hole injection layer; and a 100-nm Ag top anode. We applied thermal treatments to the cathode, ETL, and EML separately to assess their effects on the QLEDs. Additionally, we evaluated the impact of the thermal treatment atmosphere. Vacuum thermal treatment on the cathode and EML resulted in minor improvements in QLED performance, whereas treatment of the ETL led to a decline in performance. In contrast, air thermal treatment on the cathode and EML decreased QLED performance but significantly improved it by 15% in current efficiency when applied to the ETL. The performance differences attributable to the thermal treatment atmosphere are likely due to ligand removal and oxidation processes, facilitated by thermal energy and oxygen. Our study highlights that air thermal treatment on the ETL substantially improves QLED performance, offering crucial insights into the significance of thermal treatment in QLED development.

Metal-Solvent Complex Formation at the Surface of InP Colloidal Quantum Dots.

The surface chemistry of colloidal semiconductor nanocrystals (QDs) profoundly influences their physical and chemical attributes. The insulating organic shell ensuring colloidal stability impedes charge transfer, thus limiting optoelectronic applications. Exchanging these ligands with shorter inorganic ones enhances charge mobility and stability, which is pivotal for using these materials as active layers for LEDs, photodetectors, and transistors. Among those, InP QDs also serve as a model for surface chemistry investigations. This study focuses on group III metal salts as inorganic ligands for InP QDs. We explored the ligand exchange mechanism when metal halide, nitrate, and perchlorate salts of group III (Al, In Ga), common Lewis acids, are used as ligands for the conductive inks. Moreover, we compared the exchange mechanism for two starting model systems: InP QDs capped with myristate and oleylamine as X- and L-type native organic ligands, respectively. We found that all metal halide, nitrate, and perchlorate salts dissolved in polar solvents (such as n-methylformamide, dimethylformamide, dimethyl sulfoxide, H2O) with various polarity formed metal-solvent complex cations [M(Solvent)6]3+ (e.g., [Al(MFA)6]3+, [Ga(MFA)6]3+, [In(MFA)6]3+), which passivated the surface of InP QDs after the removal of the initial organic ligand. All metal halide capped InP/[M(Solvent)6]3+ QDs show excellent colloidal stability in polar solvents with high dielectric constant even after 6 months in concentrations up to 74 mg/mL. Our findings demonstrate the dominance of dissociation-complexation mechanisms in polar solvents, ensuring colloidal stability. This comprehensive understanding of InP QD surface chemistry paves the way for exploring more complex QD systems such as InAs and InSb QDs.

The surface chemistry of colloidal lead halide perovskite nanowires.

This study explored the interplay between the ligand-surface chemistry of colloidal CsPbBr3 nanowires (NWs) and their optical properties. The ligand equilibrium was probed using nuclear magnetic resonance spectroscopy, and by perturbing the equilibrium via dilution, the gradual removal of ligands from the CsPbBr3 surface was observed. This removal was correlated with an increase in the surface defect density, as suggested by a broadening of the photoluminescence (PL) spectrum, a decrease in the PL quantum yield (PLQY), and quenching of the PL decay. These results highlight similar surface binding between the traditional CsPbBr3 quantum dots and our NWs, thereby expanding the scope of well-established ligand chemistry to a relatively unexplored nanocrystal morphology. By controlling the dilution factor, it was revealed that CsPbBr3 NWs achieve a PLQY of 72% ± 2% and a relatively long average PL lifetime of 400 ± 10ns, without relying on additional surface passivation techniques, such as ligand exchange.

Pinpointing the Cl Coordination Effect on Mn-N3-Cl Moiety Toward Boosting Reaction Kinetics and Suppressing Shuttle Effect in Li-S Batteries.

Single atom catalysts (SACs) are highly favored in Li-S batteries due to their excellent performance in promoting the conversion of lithium polysulfides (LiPSs) and inhibiting their shuttling. However, the intricate and interrelated microstructures pose a challenge in deciphering the correlation between the chemical environment surrounding the active site and its catalytic activity. Here, a novel SAC featuring a distinctive Mn-N3-Cl moiety anchored on B, N co-doped carbon nanotubes (MnN3Cl@BNC) is synthesized. Subsequently, the selective removal of the Cl ligands while inheriting other microstructures is performed to elucidate the effect of Cl coordination on catalytic activity. The Cl coordination effectively enhances the electron cloud density of the Mn-N3-Cl moiety, reducing the band gap and increasing the adsorption capacity and redox kinetics of LiPSs. As a modified separator for Li-S batteries, MnN3Cl@BNC exhibits high capacities of 1384.1 and 743mAhg-1 at 0.1 and 3C, with a decay rate of only 0.06% per cycle over 700cycles at 1C, which is much better than that of MnN3OH@BNC. This study reveals that Cl coordination positively contributes to improving the catalytic activity of the Mn-N3-Cl moiety, providing a fresh perspective for the design of high-performance SACs.

Well-Defined Ti Surface Sites in Ziegler-Natta Pre-Catalysts from 47/49Ti Solid-State Nuclear Magnetic Resonance Spectroscopy.

Treatment of Ziegler-Natta (ZN) catalysts with BCl3 improves their activity by increasing the number of active sites. Here we show how 47/49Ti solid-state nuclear magnetic resonance (NMR) spectroscopy enables us to understand the electronic structure of the Ti surface sites present in such treated ZN pre-catalysts, prior to activation with alkyl aluminum. High-field (21.1 T) and low-temperature (∼100 K) NMR augmented by DFT modeling on the pre-catalyst and corresponding molecular analogues enables the detection of 47/49Ti NMR signatures and a molecular level understanding of the electronic structure of Ti surface sites. The associated Ti surface sites exhibit 49Ti NMR signatures (δiso,exp = -170 ppm; CQ,exp = 9.3 MHz; κ = 0.05) corresponding to well-defined fully chlorinated hexacoordinated Ti sites adsorbed on a distorted surface of the MgCl2 support, formed upon post-treatment with BCl3 and removal of the alkoxo ligands, paralleling the increased polymerization activity.

Dipolar Coupling as a Mechanism for Fine Control of Magnetic States in ErCOT-Alkyl Molecular Magnets.

The design of molecular magnets has progressed greatly by taking advantage of the ability to impart successive perturbations and control vibronic transitions in 4fn systems through the careful manipulation of the crystal field. Herein, we control the orientation and rigidity of two dinuclear ErCOT-based molecular magnets: the inversion-symmetric bridged [ErCOT(μ-Me)(THF)]2 (2) and the nearly linear Li[(ErCOT)2(μ-Me)3] (3). The conserved anisotropy of the ErCOT synthetic unit facilitates the direction of the arrangement of its magnetic anisotropy for the purposes of generating controlled internal magnetic fields, improving control of the energetics and transition probabilities of the electronic angular momentum states with exchange biasing via dipolar coupling. This control is evidenced through the introduction of a second thermal barrier to relaxation operant at low temperatures that is twice as large in 3 as in 2. This barrier acts to suppress through-barrier relaxation by protecting the ground state from interacting with stray local fields while operating at an energy scale an order of magnitude smaller than the crystal field term. These properties are highlighted when contrasted against the mononuclear structure ErCOT(Bn)(THF)2 (1), in which quantum tunneling of the magnetization processes dominate, as demonstrated by magnetometry and ab initio computational methods. Furthermore, far-infrared magnetospectroscopy measurements reveal that the increased rigidity imparted by successive removal of solvent ligands when adding bridging methyl groups, along with the increased excited state purity, severely limits local spin-vibrational interactions that facilitate magnetic relaxation, manifesting as longer relaxation times in 3 relative to those in 2 as temperature is increased.

STUDY OF THE THERMAL PROPERTIES OF SILVER(I) COORDINATION COMPOUNDS WITH 1,2,4-TRIAZOLES

In this work, using the differential thermal method, the thermal properties of silver (I) complexes with 1,2,4-triazole (1,2,4-triazolethiol) were studied. Based on the studies carried out, intermediate and final products of thermolysis of these complexes were determined, reactions of their thermal decomposition, thermal dehydration processes, and the sequential removal of acid and organic ligands from their composition were proposed. It was revealed that the onset of dehydration temperature depends on the nature of the resulting complex and the method of addition of the water molecule.

Effects of Temperature, Axial Ligand, and Photoexcitation on the Structure and Spin-State of Nickel(II) Complexes with Water-Soluble 5,10,15,20-Tetrakis(1-methylpyridinium-4-yl)porphyrin.

Water-soluble metalloporphyrins, depending on the metal center, possess special spectral, coordination, and photochemical features. In nickel(II) porphyrins, the Ni(II) center can occur with low-spin or high-spin electronic configuration. In aqueous solution, the cationic nickel(II) complex (Ni(II)TMPyP4+, where H2TMPyP4+ = 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin), exists in both forms in equilibrium. In this study, an equilibrium system involving the low-spin and high-spin forms of Ni(II)TMPyP4+ was investigated via application of irradiation, temperature change, and various potential axial ligands. Soret band excitation of this aqueous system, in the absence of additional axial ligands, resulted in a shift in the equilibrium toward the low-spin species due to the removal of axial solvent ligands. The kinetics and the thermodynamics of the processes were also studied via determination of the rate and equilibrium constants, as well as the ΔS, ΔH, and ΔG values. Temperature increase had a similar effect. The equilibrium of the spin isomers was also shifted by decreasing the solvent polarity (using n-propanol) as well as by the addition of a stronger coordinating axial ligand (such as ammonia). Since triethanolamine is an efficient electron donor in Ni(II)TMPyP4+-based photocatalytic systems, its interaction with this metalloporphyin was also studied. The results promote the development of efficient photocatalytic systems based on this complex.

Au9 nanocluster adsorption and agglomeration control through sulfur modification of mesoporous TiO2.

In the present work phenyl phosphine-protected Au9 nanoclusters were deposited onto (3-mercaptopropyl) trimethoxysilane (MPTMS) modified and unmodified mesoporous screen printed TiO2. The removal of the cluster ligands by annealing was applied to enhance the interaction between Au cluster cores and semiconductor surfaces in the creation of efficient photocatalytic systems. The heat treatment could lead to undesired agglomeration of Au clusters, affecting their unique properties as size specific clusters. To address this challenge, the semiconductor surfaces were modified by MPTMS. Characterization techniques confirm the effectiveness of the modification processes, and XPS demonstrates that S functionalized MTiO2 is more efficient than MTiO2 in increasing Au9 NCs adsorption by a factor of 10 and preventing Au cluster agglomeration even after annealing. Overall, this work contributes valuable insights into photocatalytic systems through controlled modification of semiconductor surfaces and Au nanocluster deposition.

Chemical activation of atom-precise Pd3 nanoclusters on γ-Al2O3 supports for transfer hydrogenation reactions.

Deposition of atom-precise nanoclusters onto solid supports is a promising route to synthesize model heterogeneous catalysts. However, to enhance nanocluster-support interactions, activation of the nanoclusters by removal of surface ligands is necessary. Thermal treatment to remove surface ligands from supported metal nanoclusters can yield highly active heterogeneous catalysts, however, the high temperatures employed can lead to poor control over the final size and speciation of the nanoclusters. As an alternative to high-temperature thermal treatments, chemical activation of [Pd3(μ-Cl)(μ-PPh2)2(PPh3)3]+ (Pd3) nanoclusters on γ-Al2O3 supports under mild reaction conditions has been demonstrated in this work. Hydride-based reducing agents such as NaBH4, LiBH4, and LiAlH4 have been examined for the activation of the Pd3 nanoclusters. The structural evolution and speciation of the nanoclusters after activation have been monitored using a combination of XAS, XPS, STEM-EDX mapping, and solid-state NMR techniques. The results indicate that treatment with borohydride reducing agents successfully removed surface phosphine and chloride ligands, and the extent of size growth of the nanoclusters during activation is directly correlated with the amount of borohydride used. Borate side products remain on the γ-Al2O3 surface after activation; moreover, exposure to high amounts of NaBH4 resulted in the incorporation of B atoms inside the lattice of the activated Pd nanoclusters. LiAlH4 treatment, on the other hand, led to no significant size growth of the nanoclusters and resulted in a mixture of Pd single-atom sites and activated nanoclusters on the γ-Al2O3 surface. Finally, the catalytic potential of the activated nanoclusters has been tested in the transfer hydrogenation of trans-cinnamaldehyde, using sodium formate/formic acid as the hydrogen donor. The catalytic results showed that smaller Pd nanoclusters are much more selective for hydrogenating trans-cinnamaldehyde to hydrocinnamaldehyde, but overall have lower activity compared to larger Pd nanoparticles. Overall, this study showcases chemical activation routes as an alternative to traditional thermal activation routes for activating supported nanoclusters by offering improved speciation and size control.

Modelling the growth reaction pathways of zincone ALD/MLD hybrid thin films: a DFT study.

ALD/MLD hybrid thin films can be fabricated by combining atomic layer deposition (ALD) and molecular layer deposition (MLD). Even though this deposition method has been extensively used experimentally, the computational work required to acquire the reaction paths during the thin film deposition process is still in dire demand. We investigated hybrid thin films consisting of diethyl zinc and either 4-aminophenol or hydroquinone using both gas-phase and surface reactions to gain extensive knowledge of the complex phenomena occurring during the process of hybrid thin film deposition. We used density functional theory (DFT) to obtain the activation energies of these kinetic-dependent deposition processes. Different processes of ethyl ligand removal as ethane were discovered, and we found that the hydroxyl group of 4-aminophenol was more reactive than the amino group in the migration of hydrogen to an ethyl ligand within a complicated branching reaction chain.

Hierarchically Micro- and Mesoporous Zeolitic Imidazolate Frameworks Through Selective Ligand Removal.

A new method to engineer hierarchically porous zeolitic imidazolate frameworks (ZIFs) through selective ligand removal (SeLiRe) is presented. This innovative approach involves crafting mixed-ligand ZIFs (ML-ZIFs) with varying proportions of 2-aminobenzimidazole (NH2-bIm) and 2-methylimidazole (2-mIm), followed by controlled thermal treatments. This process creates a dual-pore system, incorporating both micropores and additional mesopores, suggesting selective cleavage of metal-ligand coordination bonds. Achieving this delicate balance requires adjustment of heating conditions for each mixed-ligand ratio, enabling the targeted removal of NH2-bIm from a variety of ML-ZIFs while preserving their inherent microporous framework. Furthermore, the distribution of the initial thermolabile ligand plays a pivotal role in determining the resulting mesopore architecture. The efficacy of this methodology is aptly demonstrated through the assessment of hierarchically porous ZIFs for their potential in adsorbing diverse organic dyes in aqueous environments. Particularly striking is the performance of the 10%NH2-ZIF-2h, which showcases an astonishing 40-fold increase in methylene blue adsorption capacity compared to ZIF-8, attributed to larger pore volumes that accelerate the diffusion of dye molecules to adsorption sites. This versatile technique opens new avenues for designing micro/mesoporous ZIFs, particularly suited for liquid media scenarios necessitating efficient active site access and optimal diffusion kinetics, such as purification, catalysis, and sensing.