Labile Ligands Research Articles

Tunable Anticancer Activity of Furoylthiourea-Based RuII -Arene Complexes and Their Mechanism of Action.

Fourteen new RuII -arene (p-cymene/benzene) complexes (C1-C14) have been synthesized by varying the N-terminal substituent in the furoylthiourea ligand and satisfactorily characterized by using analytical and spectroscopic techniques. Electrostatic potential maps predicted that the electronic effect of the substituents was mostly localized, with some influence seen on the labile chloride ligands. The structure-activity relationships of the Ru-p-cymene and Ru-benzene complexes showed opposite trends. All the complexes were found to be highly toxic towards IMR-32 cancer cells, with C5 (Ru-p-cymene complex containing C6 H2 (CH3 )3 as N-terminal substituent) and C13 (Ru-benzene complex containing C6 H4 (CF3 ) as N-terminal substituent) showing the highest activity among each set of complexes, and hence they were chosen for further study. These complexes showed different behavior in aqueous solutions, and were also found to catalytically oxidize glutathione. They also promoted cell death by apoptosis and cell cycle arrest. Furthermore, the complexes showed good binding ability with the receptors Pim-1 kinase and vascular endothelial growth factor receptor 2, commonly overexpressed in cancer cells.

Tuning the H-Atom Transfer Reactivity of Iron(IV)-Oxo Complexes as Probed by Infrared Photodissociation Spectroscopy.

Reactivities of non‐heme iron(IV)‐oxo complexes are mostly controlled by the ligands. Complexes with tetradentate ligands such as [(TPA)FeO]2+ (TPA=tris(2‐pyridylmethyl)amine) belong to the most reactive ones. Here, we show a fine‐tuning of the reactivity of [(TPA)FeO]2+ by an additional ligand X (X=CH3CN, CF3SO3 −, ArI, and ArIO; ArI=2‐(tBuSO2)C6H4I) attached in solution and reveal a thus far unknown role of the ArIO oxidant. The HAT reactivity of [(TPA)FeO(X)]+/2+ decreases in the order of X: ArIO > MeCN > ArI ≈ TfO−. Hence, ArIO is not just a mere oxidant of the iron(II) complex, but it can also increase the reactivity of the iron(IV)‐oxo complex as a labile ligand. The detected HAT reactivities of the [(TPA)FeO(X)]+/2+ complexes correlate with the Fe=O and FeO−H stretching vibrations of the reactants and the respective products as determined by infrared photodissociation spectroscopy. Hence, the most reactive [(TPA)FeO(ArIO)]2+ adduct in the series has the weakest Fe=O bond and forms the strongest FeO−H bond in the HAT reaction.

Tuning the H‐Atom Transfer Reactivity of Iron(IV)‐Oxo Complexes as Probed by Infrared Photodissociation Spectroscopy

AbstractReactivities of non‐heme iron(IV)‐oxo complexes are mostly controlled by the ligands. Complexes with tetradentate ligands such as [(TPA)FeO]2+ (TPA=tris(2‐pyridylmethyl)amine) belong to the most reactive ones. Here, we show a fine‐tuning of the reactivity of [(TPA)FeO]2+ by an additional ligand X (X=CH3CN, CF3SO3−, ArI, and ArIO; ArI=2‐(tBuSO2)C6H4I) attached in solution and reveal a thus far unknown role of the ArIO oxidant. The HAT reactivity of [(TPA)FeO(X)]+/2+ decreases in the order of X: ArIO > MeCN > ArI ≈ TfO−. Hence, ArIO is not just a mere oxidant of the iron(II) complex, but it can also increase the reactivity of the iron(IV)‐oxo complex as a labile ligand. The detected HAT reactivities of the [(TPA)FeO(X)]+/2+ complexes correlate with the Fe=O and FeO−H stretching vibrations of the reactants and the respective products as determined by infrared photodissociation spectroscopy. Hence, the most reactive [(TPA)FeO(ArIO)]2+ adduct in the series has the weakest Fe=O bond and forms the strongest FeO−H bond in the HAT reaction.

Tetranitratopalladate(II) Salts with Tetraalkylammonium Cations: Structural Aspects, Reactivity, and Applicability toward Palladium Deposition for Catalytic Applications.

A series of salts (R4N)2[Pd(NO3)4] (R = CH3, C2H5, n-C3H7; 1-3) were synthesized in high yield from a nitric acid solution of palladium. The salts were characterized by a combination of physicochemical methods, and their crystal structures were determined by X-ray diffraction. The conformation of the [Pd(NO3)4]2- anion was studied in detail using crystal structure data and density functional theory calculations. A combination of nonhygroscopicity and stability under normal conditions, together with thermolability, high solubility in various solvents, and the lability of nitrato ligands, makes salts 1-3 valuable starting materials for the synthesis of Pd compounds and the preparation of Pd-containing catalysts. In this work, these applications were illustrated by the synthesis of heteroleptic Pd(II) nitrato complexes with N-donor ligands and the preparation of Pd0.1Ni0.9/SiO2 catalysts, which worked well in H2 generation from hydrazine hydrate. Generally, it was shown that up to several weight percent of Pd can be deposited on various oxide/hydroxide supports using a straightforward chemisorption procedure from acetone solutions of 1-3.

Probing the Effects of Electron Deficient Aryl Substituents and a π‐System Extended NHC Ring on the Photocatalytic CO2 Reduction Reaction with Re‐pyNHC‐Aryl Complexes**

AbstractThe ever‐expanding need for renewable energy can be addressed in part by photocatalytic CO2 reduction to give fuels via an artificial photosynthetic process driven by sunlight. A series of rhenium photocatalysts are evaluated in the photocatalytic CO2 reduction reaction and via photophysical, electrochemical, and computational studies. The impact of various electron withdrawing substituents on the aryl group of the pyNHC‐aryl ligand along with the impact of extending conjugation along the backbone of the ligand is analyzed. A strong correlation between excited‐state lifetimes, photocatalytic rates, and computationally determined dissociation energy of the labile ligand of these complexes is observed. Additionally, computed orbital analysis provides an added understanding, which allows for prediction of the potential impact of an electron withdrawing substituent on photocatalysis.

Synthesis of a carborane-substituted bis(phosphanido) cobaltate(i), ligand substitution, and unusual P4 fragmentation.

Oxidative addition of the P–P single bond of an ortho-carborane-derived 1,2-diphosphetane (1,2-C2(PMes)2B10H10) (Mes = 2,4,6-Me3C6H2) to cobalt(−i) and nickel(0) sources affords the first heteroleptic complexes of a carborane-bridged bis(phosphanido) ligand. The complexes also incorporate labile ligands suitable for further functionalisation. Thus, the cobalt(i) complex [K([18]crown-6)][Co{1,2-(PMes)2C2B10H10}(cod)] (cod = 1,5-cyclooctadiene) bearing a labile cyclooctadiene ligand undergoes facile ligand exchange reactions with isonitriles and tert-butyl phosphaalkyne with retention of the bis(phosphanido) ligand. However, in the reaction with one equivalent of P4, the electron-rich bis(phosphanido) moiety abstracts a single phosphorus atom with formation of a new P3 chain, while the remaining three P atoms derived from P4 form an η3-coordinating cyclo-P3 ligand. In contrast, when the same reaction is performed with two equivalents of the cobalt(i) complex, a dinuclear product is formed which features an unusual P4 chain in its molecular structure.

Absolute configuration retention of a configurationally labile ligand during dynamic processes of thiolate protected gold clusters.

Monolayer protected metal clusters are dynamic nanoscale objects. For example, the chiral Au38(2-PET)24 cluster (2-PET: 2-phenylethylthiolate) racemizes at moderate temperature. In addition, ligands and metal atoms can easily exchange between clusters. Such processes are important for applications of monolayer protected metal clusters; however, the mechanistic study of such processes turns out to be challenging. Here we use a configurationally labile, axially chiral ligand, biphenyl-2,2′-dithiol (R/S-BiDi), as a probe to study dynamic cluster processes. It is shown that the ligand exchange of free R/S-BiDi on a chiral Au38(2-PET)24 cluster is diastereospecific. Using chiral chromatography, isolated single diastereomers of the type anticlockwise/clockwise-Au38(2-PET)22(R/S-BiDi)1 could be isolated. Upon heating, the cluster framework racemizes, while the R/S-BiDi ligand does not. These findings demonstrate that during cluster racemization and/or ligand exchange between clusters, the R/S-BiDi ligand is sufficiently confined, thus preventing its racemization, and exclude the possibility that the ligand desorbs from the cluster surface.

A novel catalytic heme cofactor in SfmD with a single thioether bond and a bis-His ligand set revealed by a de novo crystal structural and spectroscopic study.

SfmD is a heme-dependent enzyme in the biosynthetic pathway of saframycin A. Here, we present a 1.78 Å resolution de novo crystal structure of SfmD, which unveils a novel heme cofactor attached to the protein with an unusual HxnHxxxC motif (n ∼ 38). This heme cofactor is unique in two respects. It contains a single thioether bond in a cysteine–vinyl link with Cys317, and the ferric heme has two axial protein ligands, i.e., His274 and His313. We demonstrated that SfmD heme is catalytically active and can utilize dioxygen and ascorbate for a single-oxygen insertion into 3-methyl-l-tyrosine. Catalytic assays using ascorbate derivatives revealed the functional groups of ascorbate essential to its function as a cosubstrate. Abolishing the thioether linkage through mutation of Cys317 resulted in catalytically inactive SfmD variants. EPR and optical data revealed that the heme center undergoes a substantial conformational change with one axial histidine ligand dissociating from the iron ion in response to substrate 3-methyl-l-tyrosine binding or chemical reduction by a reducing agent, such as the cosubstrate ascorbate. The labile axial ligand was identified as His274 through redox-linked structural determinations. Together, identifying an unusual heme cofactor with a previously unknown heme-binding motif for a monooxygenase activity and the structural similarity of SfmD to the members of the heme-based tryptophan dioxygenase superfamily will broaden understanding of heme chemistry.

Role of the (pseudo)halido ligand in ruthenium(II) p-cymene α-amino acid complexes in speciation, protein reactivity and cytotoxicity.

The reactions of the dimeric complexes [RuX2(η6-p-cymene)]2 (X = Br, I, SCN) with L-proline (ProH) and trans-4-hydroxy-L-proline (HypH), in methanol in the presence of NaOH, afforded [RuX(κ2N,O-Pro)(η6-p-cymene)] (X = Br, 1b; I, 1c; SCN, 1d) and [RuX(κ2N,O-Hyp)(η6-p-cymene)] (X = Br, 2b; I, 2c; SCN, 2d), respectively. Alternatively, the one-pot, sequential addition of the appropriate α-amino carboxylate and X- salt to [RuCl2(η6-p-cymene)]2 led to [RuX(κ2N,O-Pro)(η6-p-cymene)] (X = N3, 1e; NO2, 1f; CN 1g) and [Ru(N3)(κ2N,O-Hyp)(η6-p-cymene)] (2e). Complexes [Ru(κ3N,O,O'-O2CCH(NH2)(R)O)(η6-p-cymene)] (R = CH2, 3h; R = CHMe, 4h; R = CH2CH2, 5h) were prepared from the reaction of [RuCl2(η6-p-cymene)]2 with the appropriate α-amino acid and NaOH in refluxing isopropanol. Treatment of the L-serine (SerH2) derivative [RuCl(κ2N,O-SerH)(η6-p-cymene)] (3a) with 1,3,5-triaza-7-phosphaadamantane (PTA) in water at reflux produced [Ru(κ2N,O-Ser)(κP-PTA)(η6-p-cymene)]Cl ([3i]Cl). The products were isolated in good to excellent yields, and were characterized by elemental analysis, IR and multinuclear NMR spectroscopy. The structures of 1f and 2b-e were ascertained by X-ray diffraction studies. The behaviour of the complexes in water and cell culture medium was investigated by multinuclear NMR and UV-Vis spectroscopy, revealing a considerable influence of the monodentate ligand on the aqueous chemistry. Complexes 1d-e, 2d-e, 3h, 4h and [3i]Cl, showing substantial inertness in aqueous media, were assessed for their cytotoxicity towards A2780 and A2780cisR cancer cell lines and the noncancerous HEK 293T cell line. A selection of compounds was also investigated for Ru uptake in A2780 cells and interactions with cytochrome c as a model protein. Combined, these studies provide insights into the previously debated role of the 'leaving' ligand on the biological activity of Ru(II) arene α-amino acid complexes.

Controlling the Co–S coordination environment in Co-doped WS2 nanosheets for electrochemical oxygen reduction

The impact of Co–S coordination environment in pH 7 ORR catalysis is evaluated using dilute Co atoms adsorbed on WS2 nanosheets. Optimal reactivity is achieved when Co is coordinated to both sulfur atoms on WS2 and labile solvent ligands.

Ligand Lability Driven by Metal-to-Borane Pseudorotation: A Mechanism for Ligand Exchange.

The discovery of systems that interact with small molecules plays a vital facilitating role in the development of devices that show sensitivity to their surroundings and an ability to quickly relay chemical and physical information. Herein, we report on the reaction of [NiCl2(dppe)] with decaborane that produces in usable yield a new 11-vertex nickelaborane, [7,7-(dppe)-nido-7-NiB10H12] (1), which shows interesting reactivity and functionality toward carbon monoxide and ethylisonitrile. This contribution describes the synthesis and full structural characterization of 1 and its small-molecule EtNC and CO adducts, 2 and 3, and delineates the dynamic molecular behavior of all of these species in solution. This information sets a foundation from which more advanced work on this and related metallaborane systems can be conceived and provides a more general reference to how NMR spectroscopy, combined with DFT calculations, can be used to analyze the precise locomotion of labile ligands around a metal center held within a borane cluster.

Synthesis and stability of the dirhenium(III) cluster compounds with isoleucine, serine and proline in aqueous solutions

The previously developed methods for the synthesis of cis-tetrachlorodi--carboxylates of dirhenium(III) were modified, due to which the derivatives of Re26+ with proteinogenic amino acids (AA) isoleucine, serine and proline were synthesized for the first time. The composition and structure of these substances with the general formula cis-[Re2(АA)2Cl4(CH3CN)2]Cl2 were confirmed by elemental analysis, electron adsorption and IR spectroscopy. The presence of a characteristic peak, which corresponds to the *-electronic transition of the Re–Re quadruple bond for compounds with the cis-arrangement of two bridging-coordinated carboxylate groups in the ligand environment of the Re26+ cluster, was showed by using the data on the electronic absorption spectra of solutions of the synthesized compounds. The IR spectrum contains an intense, weakly split band in the region of 1466–1458 cm–1, which is attributed to the s(CO) coordinated carboxyl group and indicates its bridging coordination to the binuclear Re26+ fragment. The spectra exhibited the presence of bands of stretching (NH3+) and bending vibrations (NH3+) of protonated amino groups in complex compounds of isoleucine and serine and the presence of bands of stretching (NH2+) and bending vibrations (NH2+) of the protonated imino group of proline. The stability of the prepared complex compounds in aqueous solutions was investigated. It is shown that the hydrolysis of the synthesized substances occurs within 9–14 days with a decrease in the pH of the reaction solution due to a gradual replacement of labile chloride ligands by OH–-groups at the first stages of interaction with water. The resistance to hydrolysis is an important parameter of biologically active substances; the determination of the resistance to hydrolysis will expand understanding of the possible mechanisms of their specific biological activity.

Iterative Supervised Principal Component Analysis Driven Ligand Design for Regioselective Ti-Catalyzed Pyrrole Synthesis.

The rational design of catalysts remains a challenging endeavor within the broader chemical community owing to the myriad variables that can affect key bond-forming events. Designing selective catalysts for any reaction requires an efficient strategy for discovering predictive structure-activity relationships. Herein, we describe the use of iterative supervised principal component analysis (ISPCA) in de novo catalyst design. The regioselective synthesis of 2,5-dimethyl-1,3,4-triphenyl-1H-pyrrole (C) via a Ti-catalyzed formal [2 + 2 +1] cycloaddition of phenylpropyne and azobenzene was targeted as a proof of principle. The initial reaction conditions led to an unselective mixture of all possible pyrrole regioisomers. ISPCA was conducted on a training set of catalysts, and their performance was regressed against the scores from the top three principal components. Component loadings from this PCA space and k-means clustering were used to inform the design of new test catalysts. The selectivity of a prospective test set was predicted in silico using the ISPCA model, and optimal candidates were synthesized and tested experimentally. This data-driven predictive-modeling workflow was iterated, and after only three generations the catalytic selectivity was improved from 0.5 (statistical mixture of products) to over 11 (>90% C) by incorporating 2,6-dimethyl-4-(pyrrolidin-1-yl)pyridine as a ligand. The origin of catalyst selectivity was probed by examining ISPCA variable loadings in combination with DFT modeling, revealing that ligand lability plays an important role in selectivity. A parallel catalyst search using multivariate linear regression (MLR), a popular approach in catalysis informatics, was also conducted in order to compare these strategies in a hypothetical catalyst scouting campaign. ISPCA appears to be more robust and predictive than MLR when sparse training sets are used that are representative of the data available during the early search for an optimal catalyst. The successful development of a highly selective catalyst without resorting to long, stochastic screening processes demonstrates the inherent power of ISPCA in de novo catalyst design and should motivate the general use of ISPCA in reaction development.

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media.

A new cobalt metal-organic framework (2D-Co-MOF) based on well-defined layered double cores that are strongly connected by intermolecular bonds has been developed. Its 3D structure is held together by π-π stacking interactions between the labile pyridine ligands of the nanosheets. In aqueous solution, the axial pyridine ligands are exchanged by water molecules, producing a delamination of the material, where the individual double nanosheets preserve their structure. The original 3D layered structure can be restored by a solvothermal process with pyridine, so that the material shows a "memory effect" during the delamination-pillarization process. Electrochemical activation of a 2D-Co-MOF@Nafion-modified graphite electrode in aqueous solution improves the ionic migration and electron transfer across the film and promotes the formation of the electrocatalytically active cobalt species for the oxygen evolution reaction (OER). The so-activated 2D-Co-MOF@Nafion composite exhibits an outstanding electrocatalytic performance for the OER at neutral pH, with a TOF value (0.034 s-1 at an overpotential of 400 mV) and robustness superior to those reported for similar electrocatalysts under similar conditions. The particular topology of the delaminated nanosheets, with quite distant cobalt centers, precludes the direct coupling between the electrocatalytically active centers of the same sheet. On the other hand, the increase in ionic migration across the film during the electrochemical activation stage rules out the intersheet coupling between active cobalt centers, as this scenario would impair electrolyte permeation. Altogether, the most plausible mechanism for the O-O bond formation is the water nucleophilic attack to single Co(IV)-oxo or Co(III)-oxyl centers. Its high electrochemical efficiency suggests that the presence of nitrogen-containing aromatic equatorial ligands facilitates the water nucleophilic attack, as in the case of the highly efficient cobalt porphyrins.

Oxidative Addition of Biphenylene and Chlorobenzene to a Rh(CNC) Complex.

The synthesis and organometallic chemistry of rhodium(I) complex [Rh(CNC–Me)(SOMe2)][BArF 4], featuring NHC‐based pincer and labile dimethyl sulfoxide ligands, is reported. This complex reacts with biphenylene and chlorobenzene to afford products resulting from selective C–C and C–Cl bond activation, [Rh(CNC–Me)(2,2'‐biphenyl)(OSMe2)][BArF 4] and [Rh(CNC–Me)(Ph)Cl(OSMe2)][BArF 4], respectively. A detailed DFT‐based computational analysis indicates that C–H bond oxidative addition of these substrates is kinetically competitive, but in all cases endergonic: contrasting the large thermodynamic driving force calculated for insertion of the metal into the C–C and C–Cl bonds, respectively. Under equivalent conditions the substrates are not activated by the phosphine‐based pincer complex [Rh(PNP‐iPr)(SOMe2)][BArF 4].

Synthesis, spectral studies and antibacterial activity of iron(III) complexes with hydrazone functionalized ligands: X-Ray structure determination of a novel five coordinate complex containing labile ligands

Iron(III) complexes having general formula FeLCl 2 [where, L = 2-acetylpyridine acetoylhydrazone(APAH), 2-acetylpyridine benzoylhydrazone(APBH), 2-acetylthiophene acetoylhydrazone(ATAH), and 2-acetythiophene benzoylhydrazone(ATBH) ] have been synthesized characterized based on molar conductivity, electronic and IR spectroscopy. The structure of iron(III) complex with APBH ligand is determined using single crystal X-Ray crystallography . The complex crystallizes in monoclinic space group P21/n with a = 7.8490(6) Å, b = 15.1018(11) Å, c = 13.2263(10) Å, α = 90°, β=100.183(3)°, γ = 90°, V = 1543.1(2) Å3 and Z = 4 with central Fe(III) ion coordinated one tridentate APBH ligand. The iron is 5- coordinate binding with one organic (hydrazone) unit and two labile chloride ligands. The hydrazone acts as NNO –tridentate donor system. Iron is coordinated by pyridine ring nitrogen, azomethine nitrogen and benzoyl oxygen atoms and the two chloride ligands bind with metal completing distorted square pyramidal structure. The iron complexes are screened for their anti-bacterial activities against Pseudomonas aureoginos and Bacillus cereus Acetoyl hydrazones show more antibacterial activity than the corresponding benzoyl hydrazones. Functional groups of azomethine carbon are varied. The hydrazones having a methyl/ and pyridine groups show more anti bacterial activity. The complexes show more activity than the ligands.

Dual-adjuvant effect of pH-sensitive liposomes loaded with STING and TLR9 agonists regress tumor development by enhancing Th1 immune response

Nucleic acid-based pattern recognition receptor agonists are effective adjuvants and immunotherapeutic agents. Rather than single applications, ligand combinations could synergistically potentiate immune responses by elevating cytokine and chemokine production via triggering multiple signaling pathways. However, short half-lives of such labile ligands due to nuclease attack and limited cellular uptake due to their structure significantly hamper their in vivo performances. More importantly, simultaneous delivery and activity presentation of protein antigen and nucleic acid ligands critically limit the clinical development of these constructs. In this work, we approached this problem by co-encapsulating a model antigen ovalbumin along with TLR9 and STING ligands within liposomes, a well-established drug delivery system that enables payload stability and enhanced cellular activity upon internalization. Moreover, by loading dual ligands we postulated to achieve heightened Th-1 immune response that would yield pronounced protective vaccine efficacy. We show that, pH-sensitive liposomes co-encapsulating CpG ODN and cGAMP induced synergistic innate immune response by elevating type I and type II interferon levels. Most importantly, this vaccine formulation led to ~70% regression of established melanoma tumor. pH-sensitive liposomal vaccine administration elevated IgG2c/IgG1 antibody ratio, indicative of augmented OVA-specific Th1-biased immunity. Importantly, while the frequency of tumor-specific IFN-γ producing CD8+ T-cells was significantly increased, the M2-type anti-inflammatory macrophage levels were decreased in the tumor bed. In conclusion, our strategy induces reversal of immunosuppressive tumor microenvironment, while enhancing effective anti-tumor immune-response. We propose that this could be coupled with standard therapies during combating tumor eradication.

Oxidative Addition of Water, Alcohols, and Amines in Palladium Catalysis.

The homolytic cleavage of O−H and N−H or weak C−H bonds is a key elementary step in redox catalysis, but is thought to be unfeasible for palladium. In stark contrast, reported here is the room temperature and reversible oxidative addition of water, isopropanol, hexafluoroisopropanol, phenol, and aniline to a palladium(0) complex with a cyclic (alkyl)(amino)carbene (CAAC) and a labile pyridino ligand, as is also the case in popular N‐heterocyclic carbene (NHC) palladium(II) precatalysts. The oxidative addition of protic solvents or adventitious water switches the chemoselectivity in catalysis with alkynes through activation of the terminal C−H bond. Most salient, the homolytic activation of alcohols and amines allows atom‐efficient, additive‐free cross‐coupling and transfer hydrogenation under mild reaction conditions with usually unreactive, yet desirable reagents, including esters and bis(pinacolato)diboron.

Oxidative Addition of Water, Alcohols, and Amines in Palladium Catalysis

AbstractThe homolytic cleavage of O−H and N−H or weak C−H bonds is a key elementary step in redox catalysis, but is thought to be unfeasible for palladium. In stark contrast, reported here is the room temperature and reversible oxidative addition of water, isopropanol, hexafluoroisopropanol, phenol, and aniline to a palladium(0) complex with a cyclic (alkyl)(amino)carbene (CAAC) and a labile pyridino ligand, as is also the case in popular N‐heterocyclic carbene (NHC) palladium(II) precatalysts. The oxidative addition of protic solvents or adventitious water switches the chemoselectivity in catalysis with alkynes through activation of the terminal C−H bond. Most salient, the homolytic activation of alcohols and amines allows atom‐efficient, additive‐free cross‐coupling and transfer hydrogenation under mild reaction conditions with usually unreactive, yet desirable reagents, including esters and bis(pinacolato)diboron.

Palladium(II) complexes of coumarin substituted 1,2,4–triazol–5–ylidenes for catalytic C–C cross–coupling and C–H activation reactions

Two series of palladium complexes of the type [PdBr2(NHC)2] (4–6) and [PdBr2(NHC)Py] (7–9) bearing coumarin substituted triazole–based NHC ligands have been reported. Complexes have been prepared by in situ deprotonation of 1,2,4-triazolium salts with palladium acetate in DMSO/pyridine, and characterized by spectral and analytical techniques. The complexes displayed a distorted square–planar coordination geometry around the palladium atom, which is evidenced by the single crystal X–ray diffraction analysis of 4–6 and 9. Both the series of complexes have been evaluated for their efficacies in C–C bond formation reactions of various aryl bromides with phenylboronic acid, and C–H activation reactions of thiophene substituted cyanopyridine derivative. Complexes 7–9 outperformed the bis–NHC coordinated derivatives, 4–6, in both the type of catalytic reactions, which is attributed to the presence of a labile pyridine ligand.