Coordination Mode Of Ligand Research Articles

Structural and Biological Studies of Bioactive Silver(I) Complexes with Coumarin Acid Derivatives

Two new Ag(I) complexes with coumaric carboxylic acid derivatives have been synthesized. Structural studies of these noncrystalline complexes have been performed using a methodology that combines laboratory and synchrotron techniques, supported by density functional theory calculations. The arrangement of ligands around the Ag(I) cation has been refined using infrared, extended X-ray absorption fine structure, and X-ray absorption near edge structure spectroscopies. Different coordination modes of carboxylate ligands are observed for the studied compounds. Carboxylate bridges are characteristic for the Ag(I) complex with 4-oxo-4H-1-benzopyran-2-carboxylic acid (1), while a bidentate chelating motif was found for the complex with 2-oxo-2H-1-benzopyran-3-carboxylic acid (2). Additionally, the carbonyl oxygen atom of the coumarin ring coordinates to the silver cation in complex 2, while it is inactive in complex 1. Antimicrobial evaluation has been performed for both compounds. The complexes show activity against selected bacteria as well as Candida yeast. This activity is slightly lower for bacteria and the same or higher for Candida in relation to the reference substances: ciprofloxacin or fluconazole.

Synthesis and Photochemical Properties of Heterometallic Ti-Cu Ring Clusters Constructed from Myo-Inositol Ligand.

Incorporating heterometals into titanium-oxygen clusters represents an effective approach to adjusting the band gap and absorption properties. Herein, a family of heterometallic Ti-Cu clusters was synthesized under solvothermal conditions. The unique structural feature of these clusters is the formation of ring clusters with myo-inositol ligands serving as structure-directing ligands. The myo-inositol ligand, as a typical polyol ligand, demonstrates flexible and distinctive coordination modes capable of chelating up to eight transition metal ions simultaneously. Compounds 4 and 5 show significant absorption in the visible region, indicating that the incorporation of Cu ions can efficiently tune the band gap of titanium-oxygen clusters.

A new CuI/oxalamide catalytic system for the large‐scale aerobic oxidation of alcohols

Since the report of oxamide ligands, they have been widely used for the efficient construction of various types of C‐X (such as C, N, O and S) bonds. To evaluate whether the easily tunable electronic properties and unique coordination modes of oxamide ligands can also shine in the field of oxidation, we initiated a study on oxamide ligand/copper/air oxidation and applied it to the oxidation of alcohols to assess its practicality and potential applications. The practicality of this strategy was further verified through scale‐up reactions on a 100 mmol scale and gram‐scale derivatization of pharmaceutical molecules.

Coordination compounds of zinc carboxylates with an unusual benzohydrazide binding mode

Two new coordination compounds [Zn(Bhz)4(p-OB)2] (1) and [Zn(Bhz)3][Zn(Bhz)2(Fum)2].2H2O (2) (Bhz – benzohydrazide, p-OB - p-hydroxybenzoate, Fum - fumarate anions) have been synthesized and characterized by elemental analysis, IR spectroscopy, mass spectrometry and single-crystal X-ray diffraction.The results obtained show that the nature of the anion is very important factor in the complexes construction and strongly defines the coordination mode of hydrazide and acid ligands. Coordination compounds of zinc with monodentate benzohydrazide were synthesized for the first time.

Atomic-Level Structure of the Organic-Inorganic Interface of Colloidal ZnO Nanoplatelets from Dynamic Nuclear Polarization-Enhanced NMR.

Colloidal semiconductor nanoplatelets (NPLs) have emerged as a new class of nanomaterials that can exhibit substantially distinct optical properties compared to those of isotropic quantum dots, which makes them prime candidates for new-generation optoelectronic devices. Insights into the structure and anisotropic growth of NPLs can offer a blueprint for their controlled fabrication. Here, we present an atomic-level investigation of the organic-inorganic interface structure in ultrathin and stable benzamidine (bza)-supported ZnO NPLs prepared by the modified one-pot self-supporting organometallic approach. High-resolution transmission electron microscopy analysis showed a well-faceted hexagonal shape of ZnO NPLs with lateral surfaces terminated by nonpolar (101̅0) facets. The basal surfaces are flat and well-formed on one side and corrugated on the other side, which indicates that the layer-by-layer growth in the thickness of the NPLs likely occurs only in one direction via the expansion of 2D islands on the surface. The ligand coordination modes were elucidated using state-of-the-art dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy supported by density functional theory chemical shift calculations. Specifically, it was found that (101̅0) nonpolar facets are stabilized by neutral L-type bza-H ligands with hydrogen bond-supported η1-coordination mode, while polar (0001) and (0001̅) facets are covered by μ2-coordinated X-type anionic bza ligands with different conformations of aromatic rings. Moreover, the ligand packing on (101̅0) lateral facets was determined using 13C natural abundance (∼1.1%) homonuclear dipolar correlation experiments. Overall, an in-depth understanding of the growth mechanism and the unique bimodal X-type/L-type ligand coordination shell of ZnO NPLs is provided, which will facilitate further design of anisotropic nano-objects.

Structural Diversity and Dimensionality of Three Cu(II)-dpds-C5O5 2- Coordination Polymers Controlled by the Coordination Sphere of Cu(II) Centers and the Coordination Modes of C5O5 2- (dpds = 4,4'-Dipyridyldisulfide).

Three supramolecular architectures, [Cu2(dpds)2(C5O5)2(H2O)4]·3H2O (1), [Cu(dpds)(C5O5)]·3H2O (2), and [Cu2(dpds)2(C5O5)2]·9H2O·C2H5OH (3) (dpds = 4,4'-dipyridyldisulfide and C5O5 2- (croconate) = dianion of 4,5-dihydroxycyclopent-4-ene-1,2,3-trione), have been synthesized and structurally characterized. Compound 1 contains two crystallographically independent Cu(II) ions, which are both distorted octahedral geometry with elongation along the croconate- and H2O-bound axial positions and bonded with two N atoms of two dpds, two O atoms of one C5O5 2-, and two H2O molecules. Two crystallographically independent dpds ligands, both adopting the bis-monodentate bridging mode, connect two Cu(II) ions to form a one-dimensional zigzag chain-like coordination polymer. In 2 and 3, there are two and three crystallographically independent Cu(II) ions, respectively, which are all distorted octahedral geometries with elongation along the croconate-bound axial positions six-coordinated and bonded with two N atoms of two dpds ligands in cis- or/and trans-forms and four O atoms of two C5O5 2- ligands. The dpds ligands in 2 and 3 all adopt the bis-monodentate bridging mode, and the C5O5 2- ligands act as bridging ligands with bridging bis-bidentate through three C5O5 2- oxygen atoms in 2 and bridging bis-bidentate through four adjacent C5O5 2- oxygen atoms in 3, respectively, linking the Cu(II) ions to generate a two-dimensional layered and a three-dimensional metal-organic framework, respectively. The structural diversity and dimensionality observed in 1-3 may be attributed to the cis- or/and trans-coordination sphere of Cu(II) centers with two dpds ligands and the coordination modes of croconate ligands. Thermal stability and in situ temperature-dependent structural variations of 1-3 have been verified by thermogravimetric analysis and powder X-ray diffraction measurements. Compounds 1 and 3 both exhibit water vapor capture behaviors with hysteresis isotherms.

A Rationally Designed Azobenzene Photoswitch for DNA G-Quadruplex Regulation in Live Cells.

G-quadruplex (G4) DNA structures are increasingly acknowledged as promising targets in cancer research, and the development of G4-specific stabilizing compounds may lay a fundamental foundation in precision medicine for cancer treatment. Here, we propose a light-responsive G4-binder for precise modulation of drug activation, providing dynamic and spatiotemporal control over G4-associated biological processes contributing to cancer cell death. We developed a specialized fluorinated azobenzene (AB) switch equipped with a quinoline unit and a positively charged carboxamide side chain, Q-Azo4F-C, designed for targeted binding to G4 structures within cells. Biophysical studies, combined with molecular dynamics simulations, provide insights into the unique coordination modes of the photoswitchable ligand in its trans and cis configurations when interacting with G4s. The observed variations in complexation processes between the two isomeric states in different cancer cell lines manifest in more than 25-fold reversible cytotoxic activity. Immunostaining conducted with the structure-specific G4 antibody (BG4), establishes a direct correlation between cytotoxicity and the varying extent of G4 induction regulated by the two isoforms. Finally, we demonstrate the photo-driven reversible regulation of G4 structures in lung cancer cells by Q-Azo4F-C. Our findings highlight the potential of light-responsive G4-binders in advancing precision cancer therapy through dynamic control of G4-mediated pathways.

Coordination Behaviors between Aryl Diamide Amine Ligands and Trivalent Lanthanides: A Spectroscopic and Structural Study

Investigating the complexation of organic ligands with trivalent lanthanides (Ln(III)) is crucial in various fields, particularly in the separation of actinides from lanthanides for spent fuel reprocessing. While alkyl diamide amine ligands have been extensively studied, aryl‐functionalized ligands are rarely reported. To understand the effect of substituents on the coordination mode of diamide amine ligands with Ln(III), two aryl‐substituted diamide amine ligands, 2,2'‐(p‐tolylazanediyl)bis(N‐ethyl‐N‐(p‐tolyl)acetamide) (L1) and 2,2'‐((2‐ethylhexyl)azanediyl)bis(N‐ethyl‐N‐(p‐tolyl)acetamide) (L2), were synthesized and systematically studied. 1H NMR titration showed that metal ion coordination affected the electron density of methylene groups near coordinating atoms more than that of aromatic rings, while fluorescence titration and single‐crystal analysis confirmed 1:1 ligand‐Ln(III) complexes. Compared to alkyl diamide amine ligands, aryl groups increased steric hindrance, enhancing torsional strain and preventing amine nitrogen from participating in complexation, leading to weaker coordination as only two carbonyl oxygen atoms coordinated with Ln(III) in a bidentate mode. This work provides insight into how substituents influence the complexation properties of diamide amine ligands with f‐elements, aiding in the design of new ligands with improved performance.

Multi-Template-Guided Synthesis of High-Dimensional Molecular Assemblies for Humidity Gradient-Based Power Generators.

Systematically orchestrating fundamental building blocks into intricate high-dimensional molecular assemblies at molecular level is imperative for multifunctionality integration. However, this remains a formidable task in crystal engineering due to the dynamic nature of inorganic building blocks. Herein, we develop a multi-template-guided strategy to control building blocks. The coordination modes of ligands and the spatial hindrance of anionic templates are pivotal in dictating the overall structures. Flexible multi-dentate linkers selectively promote the formation of oligomeric assembly ([TeO3(Mo2O2S2)3O2(OH)(C5O2H7)3]4- {TeMo6}) into tetrahedral cages ([(TeO3)4(Mo2O2S2)12(OH)12(C9H9O4P)6]8- {Te4Mo24} and [(AsO4)4(Mo2O2S2)12(OH)12(C9H9O6)4]12- {As4Mo24}), while steric hindrance from anionic templates further assists in assembling cages into an open quadruply twisted Möbius nanobelt ([(C6H5O3P)8(Mo2O2S2)24(OH)24(C8H10O4)12]16- {P8Mo48}). Among these structures, the hydrophilic-hydrophobic hybrid cage {Te4Mo24} emerges as an exemplary molecular model for proton conduction and serves as a prototype for humidity gradient-based power generators (HGPGs). The Te4Mo24-PVDF-based HGPG (PVDF=Poly(vinylidene fluoride)) exhibits notable stability and power generation, yielding an open-circuit voltage of 0.51 V and a current density of 77.8 nA cm-2 at room temperature and 90 % relative humidity (RH). Further insights into the interactions between water molecules and microscale molecules within the generator are achieved through molecular dynamics simulations. This endeavor unveils a universal strategy for synthesizing multifunctional integration molecules.

Multi‐Template‐Guided Synthesis of High‐Dimensional Molecular Assemblies for Humidity Gradient‐Based Power Generators

Systematically orchestrating fundamental building blocks into intricate high‐dimensional molecular assemblies at molecular level is imperative for multifunctionality integration. However, this remains a formidable task in crystal engineering due to the dynamic nature of inorganic building blocks. Herein, we develop a multi‐template‐guided strategy to control building blocks. The coordination modes of ligands and the spatial hindrance of anionic templates are pivotal in dictating the overall structures. Flexible multi‐dentate linkers selectively promote the formation of oligomeric assembly ([TeO3(Mo2O2S2)3O2(OH)(C5O2H7)3]4‐ {TeMo6}) into tetrahedral cages ([(TeO3)4(Mo2O2S2)12(OH)12(C9H9O4P)6]8‐ {Te4Mo24} and [(AsO4)4(Mo2O2S2)12(OH)12(C9H9O6)4]12‐ {As4Mo24}), while steric hindrance from anionic templates further assists in assembling cages into an open quadruply twisted Möbius nanobelt ([(C6H5O3P)8(Mo2O2S2)24(OH)24(C8H10O4)12]16‐ {P8Mo48}). Among these structures, the hydrophilic‐hydrophobic hybrid cage {Te4Mo24} emerges as an exemplary molecular model for proton conduction and serves as a prototype for humidity gradient‐based power generators (HGPGs). The Te4Mo24‐PVDF‐based HGPG (PVDF = Poly(vinylidene fluoride)) exhibits notable stability and power generation, yielding an open‐circuit voltage of 0.51 V and a current density of 77.8 nA cm‐2 at room temperature and 90% relative humidity (RH). Further insights into the interactions between water molecules and microscale molecules within the generator are achieved through molecular dynamics simulations. This endeavor unveils a universal strategy for synthesizing multifunctional integration molecules.

Diastereoselective Synthesis of Sulfoxide-Functionalized N-Heterocyclic Carbene Ruthenium Complexes: An Experimental and Computational Study.

The synthesis of sulfoxide-functionalized NHC ligand precursors were carried out by direct and mild oxidation from corresponding thioether precursors with high selectivity. Using these salts, a series of cationic [Ru(II)(η6-p-cymene)(NHC-SO)Cl]+ complexes were obtained in excellent yields by the classical Ag2O transmetallation route. NMR analyses suggested a chelate structure for the metal complexes, and X-ray diffractometry studies of complexes 4 b, 4 c, 4dBArF and 4 e unambiguously confirmed the preference for the bidentate (κ2-C,S) coordination mode of the NHC-SO ligands. Interestingly, only one diastereomer, in the form of an enantiomeric pair, was observed both in 1H NMR and in the solid state for the complexes. DFT calculations showed a possible intrinsic energy difference between the two pairs of diastereomer. The calculated energy barriers suggested that inversion of the sulfoxide is only plausible from the higher energy diastereomer together with bulky substituents. Inverting the configuration at the Ru center instead shows a lower and accessible activation barrier to provide the most stable diastereomer through thermodynamic control, consistent with the observation of a single species by 1H NMR as a pair of enantiomers. All these complexes catalyse the β-alkylation of secondary alcohols. Complex 4dPF6 bearing an NHC-functionalised S-Ad group has been further studied with different primary and secondary alcohols as substrates, showing high reactivity and high to moderate β-ol-selectivities.

Tuning the Coordination Environment of Ru(II) Complexes with a Tailored Acridine Ligand.

A novel tridentate ligand featuring an acridine core and pyrazole rings, namely 2,7- di-tert-butyl-4,5-di(pyrazol-1-yl)acridine, L, was designed and used to create two ruthenium(II) complexes: [RuL2](PF6)2 and [Ru(tpy)L](PF6)2. Surprisingly, the ligand adopted different coordination modes in the complexes: facial coordination for the homoleptic complex and meridional coordination for the heteroleptic complex. The electronic absorption and electrochemical properties were evaluated. Although both complexes exhibited favorable electronic properties for luminescence, neither emitted light at room temperature nor at 77 K. This study highlights the complex interplay between ligand design, coordination mode, and luminescence in ruthenium(II) complexes.

Reaction of a Bulky β‐Diketiminato Magnesium Hydride with CO2 Yielding a Polynuclear Magnesium Cage Compound

The reaction of a sterically shielded Mg hydride complex, bearing a bulky β‐diketiminato (BDI) ligand, with CO2 leads to the formation of polynuclear complexes. CO2 not only inserts into the metal hydride bond yielding formate ions, but also adds onto the γ‐C of the BDI ligand. This reactivity gives rise to the formation of tri‐ and tetranuclear structures in THF, leading to a hexameric structure associated with a change in the coordination mode of the BDI ligand at 60 °C in THF within four days. The hexameric complex was isolated in high reproducible yield from the solution and characterized by X‐ray diffraction analysis. The reaction affording the hexameric complex was shown to be completed within 1 h at room temperature in toluene. Similar reactions of CO2 with a BDI calcium hydride complex proceeds less cleanly and a pure product could not be isolated.

Zn-Ti oxo cluster photoresists for EUV Lithography: Cluster structure and lithographic performance

Low reflectivity of multilayer mirror–induced low efficiency of existing extreme ultraviolet lithography (EUVL) has triggered the search for photoresists with heightened sensitivity. For this purpose, considerable research has focused on elements with high extreme ultraviolet (EUV) absorption, leading to considerable advancements. Solubility alteration, often resulting from ligand variations after exposure, is influenced by the cluster structure, markedly impacting lithography sensitivity. Herein, three Ti-based metal clusters, Ti6O4(OEt)8(OMc)8 (T-2), Zn2Ti4O4(OiPr)2(OMc)10 (TZ-1), and Zn4Ti2O2(OAc)2(OBu)2(OMc)10 (TZ-2), are designed and synthesized to elucidate the effects of the structure on lithography. These mixed metal–oxo clusters derived from Ti6O4(OR)8(OOCR)8 and stabilized by identical ligands exhibit structural diversity. The increase in the number of zinc atoms results in marked alterations in the oxo core, thereby triggering alterations in ligand coordination modes. These variations confer metal clusters with different solubility and lithographic properties. Analysis of the photochemical reaction mechanism and theoretical calculations reveal a reactive tridentate ligand coordination mode that considerably improves lithography sensitivity. Therefore, changing the ligand coordination mode by designing a mixed metal–oxo core holds promise for discovering new photoresists for EUV lithography.

Synergistic exploration of antimicrobial potency, cytotoxicity, and molecular mechanisms: A tripartite investigation integrating in vitro, in vivo, and in silico approaches for pyrimidine‐based metal (II) complexes

We synthesized and characterized bioactive metal (II) complexes from a pyrimidine‐based Schiff base ligand, 4‐[2‐(4‐chlorobenzylidene) hydrazinyl]‐7H‐pyrrolo[2,3‐d]pyrimidine. Through thorough elemental analysis and various physicochemical techniques, we characterized both the ligand and its Zn(II), Cd(II), and Hg(II) complexes. Coordination of the metallic ion was established via nitrogen atoms from the ligand's pyrrolo and pyrimidine rings, yielding tetrahedral complexes of the type [M(PPHpCB)2]. These complexes are identified as non‐electrolytes due to their low molar conductance. Furthermore, we investigated the coordination behavior of the pyrimidine‐based Schiff base ligand (HPPHpCB) with metal ions through comprehensive spectroscopic analysis. 1H NMR spectral data showed bonding between HPPHpCB and metal ions, while UV spectra confirmed intra‐ligand and ligand‐to‐metal charge transfer transitions, indicating coordination through nitrogen atoms. The determination of tetrahedral geometry for metal complexes confirmed their diamagnetic properties. Analysis using 13C NMR and electrospray ionization mass spectra (ESI‐MS) revealed variations in chemical shifts, confirming successful complex formation and elucidating structural modifications, electronic interactions, and metal–ligand coordination modes. Moreover, evaluation of in vitro antimicrobial activities using the minimum inhibitory concentration (MIC) approach revealed significant antibacterial and antifungal activities for Hg(II) and Cd(II) complexes, respectively. The Hg(II) complex displayed superior antioxidant activity, while Zn(II) and Cd(II) complexes also demonstrated considerable potential. In vivo, cytotoxicity assessments against Artemia salina provided insights into the cytotoxic properties of ligands and metal complexes. Computational techniques suggested their potential in combating infectious ailments. Overall, our study establishes the synthesis, characterization, and multifaceted biological activities of metal (II) complexes derived from the pyrimidine‐based Schiff base ligand, highlighting their promising role in combating various infectious diseases.

“Turn-on” Eu(III) chemosensory polymer materials for ammonia and amines detection: Experimental and molecular modeling study

Polymer films doped by Eu(III) complexes are promising candidates for the development of luminescent chemosensors. Here, luminescent properties of Eu(III) carboxylate dibenzoylmethanates in interaction with ammonia and amine vapors have been studied. Quantitative measurements of the optical response showed that with an increase of the analyte concentration in the range of 3–330 ppm, an increase in the luminescence intensity of europium(III) is observed. The reversibility of the luminescent response is established. Quantum chemical calculations showed that ammonia and amine molecules enter not in the Eu(III) coordination sphere, but forms hydrogen bonds between analyte molecules and carbonyl groups of the dibenzoylmethanate ion. Moreover, analyte changes ligand coordination mode: there occur the transformation from tridentate-bridging-cyclic coordination of carboxyl groups to bidentate-bridging which leads to decreasing in the efficiency of cross-relaxation of lanthanide ions. The obtained “turn-on” chemosensory polymer materials are promising for environmental monitoring and food safety testing.

Nicotinamide, acetate and their two new complexes with Zn(II) and Cd(II)

Two new complexes of Zn(II) and Cd(II) with acetate and nicotinamide as mixed ligands were synthesized and characterized. The Zn(II) complex is mononuclear, [Zn(ac)2(NA)2] (1), while the Cd(II) is a dinuclear one, [Cd2(ac)4(NA)4].2H2O (2), where ac = acetate and NA = nicotinamide. The compounds were characterized by means of single-crystal X-ray diffraction, FTIR, 1H NMR, 13C NMR spectroscopy, thermal analysis and elemental analysis. The geometry of the metal ion is distorted tetrahedral for Zn(II) and distorted pentagonal bipyramid geometry for Cd(II). In the dinuclear complex, each metal ion is coordinated by three acetate groups, but there are two different types of coordination modes for the acetate ligands: bidentate chelating and bridging bidentate chelating.

Syntheses, Characterization, and Multifaceted Coordination Chemistry of Hydrazonido Titanium Complexes.

The reaction of hydrazones with bis(π-η5:σ-η1-pentafulvene)titanium complexes leads to both hydrazonido and hydrazido complexes depending on the interaction of the hydrazone with the fulvene ligand of the metal complex. The molecular structures mostly reveal κ2N,N side-on coordination of the hydrazonido ligand due to the deprotonation of the N-H bond by one of the fulvene moieties. Instead of deprotonation, the reaction of the bis(adamantylidene fulvene)titanium complexes with cinnamon aldehyde phenylhydrazone leads to κ1N coordination. By using donating groups in the backbone of the hydrazone ligands, there are exceptions to this coordination mode due to the insertion of the C═N double bond into the Ti-Cexo bond of the pentafulvene moiety. Using 2-pyridinecarboxaldehyde phenylhydrazone, a formal κ3N,N,N ligand system is formed by the coordination of the pyridine nitrogen atom to the metal center via consecutive N-H deprotonation and insertion. Finally, the use of salicylaldehyde phenylhydrazone ultimately produces a complex with the κ3N,N,O coordination mode by double deprotonation of the hydrazone N-H and O-H functions. Because of its slow conversion to the final product, the intermediate was isolated as an insertion product with consecutive O-H deprotonation, showing a κ2N,O coordination mode of the hydrazido ligand.

Ruthenium(II) complexes with phosphonate-substituted phenanthroline ligands as reusable photoredox catalysts.

Ru(II) complexes with polypyridyl ligands (2,2'-bipyridine = bpy, 1,10-phenanthroline = phen) play a central role in the development of photocatalytic organic reactions. In this work, we synthesized four mixed-ligand [Ru(phen)(bpy)2]2+-type complexes (Ru-Pcat-A) bearing two phosphonate substituents P(O)(OH)(OR) (R = H, Et) attached to the phen core at positions 3,8 (Ru-3,8PH and Ru-3,8PHEt) and 4,7 (Ru-4,7PH and Ru-4,7PHEt) of the heterocycle in high yields (87-99%) and characterized them using spectral methods. Single crystal X-ray diffraction was employed to determine the coordination mode of the ditopic phen ligand in Ru-4,7PH. This complex exists as the neutral species and forms a 1D hydrogen-bonded framework in the crystals. The light absorption characteristics were found to be similar for all complexes prepared in this work. However, the emission maxima in aqueous solutions were significantly affected by the substitution of the heterocycle, ranging from 629 nm for Ru-4,7PH to 661 nm for Ru-3,8PHEt. The emission quantum yields in Ar-saturated deionized water showed a strong dependence on the substitution pattern of the phen ligand, with maximal values reaching approximately 0.11 for Ru-4,7PHEt and Ru-4,7PH, which is twice as high as that of the classical [Ru(bpy)3]2+ complex (Ru-bpy). The photocatalytic performance of Ru-Pcat-A was investigated using visible light photoredox catalytic transformations of tertiary amines. With Ru-Pcat-A, we achieved the phosphonylation of N-aryl-1,2,3,4-tetrahydroisoquinolines (THIQs) and cyanation of THIQs and N,N-dimethylaniline in methanol, while a mixture of nitromethane/methanol (1 : 1 v/v) proved to be the optimal solvent for conducting the nitromethylation of THIQs. In the majority of the studied reactions, Ru-4,7PHEt exhibited greater efficiency compared to Ru-bpy, and it could be easily separated from the products using water extraction and reused in the next catalytic cycle. We successfully performed seven consecutive nitromethylation and phosphonylation of N-phenyl-1,2,3,4-tetrahydroisoquinoline using the recycled homogeneous photoredox catalyst.

Impacts of ancillary ligand coordination modes on red-emitting cyclometalated iridium complexes

Red-phosphorescent bis-cyclometalated iridium compounds with salicylaldimine, 2-picolinamide, and related ancillary ligand classes are described; the 2-picolinamide analogues exhibit multiple binding modes that influence photophysical properties.