Life Extension Technology Research Articles

Life extension technology for steam pipe systems—I. Development of material properties

Material properties of A106B low-carbon steels were developed for life prediction analyses of steam pipes operated at elevated temperatures but in the sub-creep temperature range. Tensile, fracture toughness, fatigue crack growth rate and low-cycle fatigue properties were obtained on the piping steel at 24°C (75°F) and 288°C (550°F). The latter temperature corresponded to the highest operating temperature of nuclear plant steam piping. Increasing the test temperature from 24°C (75°F) to 288°C (550°F) decreased the yield strength and fracture toughness of the steel. Fatigue crack propagation rate properties at 24°C (75°F) and 288°C (550°F) were found to be comparable. In the low-cycle fatigue tests, below a strain amplitude level of approximately 0.5%, cyclic softening was observed, while at higher strain levels, cyclic hardening was present. Based on the results of tensile and incremental-step fatigue testing, the strain-life curve was predicted. The predicted strain-life curve was found to be in agreement with the experimental result. The fracture surfaces of fracture toughness specimens showed ductile fracture, while striations were observed on those of fatigue crack growth specimens. Fatigue striations were also observed on the fracture surfaces of low-cycle fatigue specimens. Fatigue initiation was associated with inclusions. It was shown that plastic straining in A106B steel could be detected by acoustic emission and by monitoring the eddy current response. These nondestructive evaluation techniques exhibit possibilities for in-situ monitoring of fatigue deformation. While the development of material properties for the life prediction assessment of steam pipes is included in Part I of this paper, the establishment of a quantitative life prediction methodology and inspection criteria is contained in Part II. The developed life prediction methodology quantifies the effects of operating parameters on the remaining life of steam pipes using the material properties obtained in Part I.

Life extension technology for steam pipe systems—II. Development of life prediction methodology

Part II of this paper addresses the development of a fracture mechanics based life prediction methodology of steam pipes which operate at elevated temperatures but in the sub-creep temperature range. Elastic-plastic fracture mechanics concepts were employed to establish the remaining life prediction methodology and inspection criteria of steam pipes. Leak-before-break analyses were utilized to determine the flaw inspection criteria. Both tension and bending type loading conditions were considered in the life prediction analysis. The life assessment technology is concerned with the fatigue crack growth life of circumferential cracks in a pipe. The material properties of the A106B steam pipe steel reported in Part I of this paper were used to predict the fatigue life of steam pipes. The effects of operating parameters (e.g. stress and temperature), pipe size, and material properties on the remaining life and inspection intervals of steam pipes can be quantitatively evaluated.

機器・構造物の寿命診断と長寿命化技術 (10年後の化学技術はどうなるか)

機器・構造物の寿命診断と長寿命化技術 (<特集>10年後の化学技術はどうなるか)

Suicide: ethical and moral issues from a theological perspective.

A historical review of the Jewish, Christian, Islamic, Hindu and Buddist attitudes of suicide. The evolution to the contemporary Christian perspective is discussed citing contributions of Aristotle, Augustine, Aquinas and Donne. Issues raised by life-extension technology are discussed.