Life Cycle Assessment Software Research Articles

Sensitivity analysis of the impact of environmental product declaration values on whole life carbon assessment: A case study using expanded polystyrene insulation for the retrofit of a building in Turkiye

Until recently, reducing the energy required to service a building (the operational energy) was the main aim of controlling carbon emissions from the built environment. It is now recognised that the energy required to make a building (the embodied energy) also has a crucial role in creating a net zero carbon future. The methodologies for quantifying embodied carbon are less developed than those for operational carbon, and more research is required to refine the embodied carbon metrics used when a building’s whole-life carbon emissions are calculated in a Life Cycle Assessment (LCA). One such metric is the Environmental Product Declaration (EPD), a document which can be used in different countries to quantify a product's environmental performance. EPDs are crucial data for conducting an LCA study of a building. However, despite recent efforts to standardise them, there are still inconsistencies between EPDs produced by different countries or manufacturers, even for materials with similar thermal and physical properties. This study considered some of the reasons for variations in EPDs for one product type, expanded polystyrene insulation (EPS). Factors such as (i) the LCA databases and software generators used for the EPDs, (ii) material mixes and manufacturing methods, (iii) country energy production mixes, and (iv) transportation distance from material source to the factory were considered in the analysis. As a case study, this paper examined the effects of selecting different EPDs for expanded polystyrene insulation on the final LCA results from the retrofit of a mid-rise residential building in Turkiye. Differences in EPDs demonstrated a fourfold difference between the highest and lowest upfront carbon impact results of building retrofit. This size of discrepancy indicates the need to choose the most appropriate EPD for a building/location when performing an LCA. Practical Applications Selecting an EPD when conducting an LCA for a new building or retrofit is generally left to the assessor’s judgment and knowledge, which varies greatly depending on the assessor’s background, especially in the construction sector. This study suggests an informed decision-making method over an example of EPS insulation material when the EPD options were none or limited to building locations like Turkiye.

Sustainable Purchasing Practices: A Comparison of Single-use and Reusable Pulse Oximeters in the Emergency Department.

Delivering healthcare requires significant resources and creates waste that pollutes the environment, contributes to the climate crisis, and harms human health. Prior studies have generally shown durable, reusable medical devices to be environmentally superior to disposables, but this has not been investigated for pulse oximetry probes. Our goal was to compare the daily carbon footprint of single-use and reusable pulse oximeters in the emergency department (ED). Using a Life Cycle Assessment (LCA), we analyzed greenhouse gas (GHG) emissions from pulse oximeter use in an urban, tertiary care ED, that sees approximately 150 patients per day. Low (387 uses), moderate (474 uses), and high use (561 uses), as well as cleaning scenarios, were modelled for the reusable oximeters and compared to the daily use of single-use oximeters (150 uses). We calculated GHG emissions, measured in kilograms of carbon dioxide equivalents (kgCO2e), across all life cycle stages using life-cycle assessment software and the ecoinvent database. We also carried out an uncertainty analysis using Monte Carlo methodology and calculated the break-even point for reusable oximeters. Per day of use, reusable oximeters produced fewer greenhouse gases in low-, moderate-, and high-use scenarios compared to disposable oximeters: 3.9kgCO2e, 4.9kgCO2e, 5.7kgCO2e vs 23.4kgCO2e, respectively). An uncertainty analysis showed there was no overlap in emissions, and a sensitivity analysis found reusable oximeters only need to be used 2.3 times before they match the emissions created by a single disposable oximeter. Use phases associated with the greatest emissions varied between oximeters, with the cleaning phase of reusables responsible for the majority of its GHG emissions (99%) compared to the production phases of the single-use oximeter (74%). Reusable pulse oximeters generated fewer greenhouse gas emissions per day of use than their disposable counterparts. Given that the pulse oximeter is an ubiquitous piece of medical equipment used in emergency care globally, carbon emissions could be significantly reduced if EDs used reusable rather than single-use, disposable oximeters.

From LCA to circular design: A comparative study of digital tools for the built environment

This paper reviews digital tools for supporting the Circular Economy (CE) in the built environment. The study provides a bibliometric analysis and focuses on computer-aided design (CAD), building information modeling (BIM), and computational plugins that can be used by practitioners. While Life Cycle Assessment (LCA) is the primary methodology for evaluating buildings' environmental performance, the study identifies tools beyond LCA, including computational methods and circularity indicators, that can support the evaluation of circular design strategies. Our review highlights limitations in tools’ functionalities, including a lack of representative data for LCA and underdeveloped circularity indicators. The paper calls for further development of these tools in terms of interoperability aspects, integration of more sources of data for LCA and circularity, and possibilities for a comprehensive evaluation of design choices. Computational plugins offer greater flexibility, while BIM-LCA integrations have the potential to replace dedicated LCA software and spreadsheets. Additionally, the study identifies opportunities for novel digital methods, such as algorithms for circular design with various types of reused building elements, and sharing of digital twins and material passports. This research can inform future studies and support architects and engineers in their efforts to create a sustainable built environment.

Estimating Environmental and Economic Impacts of Hermetic Bag Storage Technology

Hermetic bag storage is a growing innovative technology that can effectively mitigate insect activity in stored grain and preserve quality without pesticides. This study aimed to estimate the environmental and economic impacts of hermetic storage bags as the basis for the sustainable adoption of the technology. This study demonstrated an approach to estimate the environmental impact of using hermetic bags and their superior economic benefits for storing maize at the 1-ton scale over three years. The life cycle assessment (LCA) of six commercially available hermetic bags (AgroZ®, GrainPro, Storezo, ZeroFly®, Elite, and PICS™) from cradle to grave was evaluated and compared using the Sustainable Minds LCA software. The gas barrier liners were analyzed for structure and polymer composition using confocal microscopy and Raman spectroscopy. The results showed that bag manufacturing had the highest environmental impact contribution, with 84.6% to 90.8% of the total impacts (mPt). The carbon footprint contribution of the total service life delivered for one hermetic bag ranged from 1.1 to 1.7 kg CO2eq. The economic benefits of using hermetic bags were calculated and compared with traditional storage bag methods for one smallholder farmer using ten (10) hermetic bags storing 100 kg/bag (1 ton) of maize. The results found that using hermetic bags exhibited the highest profit of 1130 USD when used for nine months over three years, while storage loss was maintained at less than 1%.

A Modelling-Based Framework for Carbon Emissions Calculation in Additive Manufacturing: A Stereolithography Case Study

Manufacturing is one of the most heavily contributing sectors to global warming via its high carbon emissions. Initiatives such as the Green Deal and Sustainable Goals by the United Nations are supporting the reduction of carbon emissions in the manufacturing sector, which can be completed by making manufacturing processes more sustainable and with less carbon footprint. This also applies to novel manufacturing processes such as additive manufacturing (AM). In this work, a previously developed framework for carbon footprint calculation was tailor-made and applied to a specific stereolithography (SLA) case. The different steps of the SLA were categorised per process, machine tool and system level, and the respective carbon emissions were calculated, either theoretically or via a life cycle assessment software. The carbon emissions at the process level were significant when compared to the total carbon emissions, and the carbon emissions of the isopropanol (IPA) bath accounted for more than 50% of the total carbon footprint of the SLA. These results demonstrate that the AM process may not be as environmentally friendly as it was assumed to be, especially if post-processing and finishing steps are carbon-intensive, because of the liquids used for the baths.

Carbon Footprint of an Orchard Tractor through a Life-Cycle Assessment Approach

The effects of climate change are reaching a point of no return. The necessity to reduce greenhouse gasses (GHGs) is currently notorious on several levels: academic, industrial, and political. The Paris Climate Agreement set a clear roadmap to limit pollutant emissions and reach carbon neutrality. Consequently, everything related to product life cycles, considering the entire supply chain, needs to be analyzed and reconsidered. The agricultural sector is no exception: indeed, it is responsible for 11% of global anthropogenic GHG emissions. Agri-construction sector accounts for 20–30% of all GHG emissions referred to the agricultural field. This study aimed to evaluate the GHG emissions of an orchard-specialized tractor operating in Europe considering a service life of ten years. The assessment was conducted through the life-cycle assessment (LCA) standardized methodology, combining secondary data, primary data, and a software database (Open LCA (v 1.10.3) software, Environmental Footprint (v 4) database). First, the functional unit, and the boundaries of the analysis are defined. Then, the tractor life cycle is analyzed considering its three main stages: manufacture, use, and disposal. Lastly, the results are discussed according to gate-to-gate and cradle-to-gate approaches. What emerged from the assessment was the production of 5.75 kg CO2eq. · kgvehicle−1 · year−1 for a single orchard specialized tractor and the predominance of use phase emissions (around 90% of the total).

Life cycle assessment of multiple dispensing systems used for cosmetic product packaging

AbstractWorldwide, the packaging industry for consumer product goods, including personal care and beauty products, generates over $25 billion in sales. An extremely high environmental impact follows the large demand in the industry. Almost 70% of the plastic waste generated in the cosmetics market is not recyclable. Sustainability in the beauty industry is complex and multifaceted, requiring an evaluation of all factors. Packaging plays an important role in the cosmetics market, and considering the amount of waste it generates, it is essential to understand packaging dispensing systems from an environmental perspective. This study investigated the environmental impacts of three dispensing systems commonly used for cosmetic product packaging: the general dip‐tube pump, the airless pump and the bag‐in‐bottle format. A cradle‐to‐grave life cycle assessment (LCA) was performed to quantitatively analyse the environmental burden of those three different dispensing systems, using a facial cream as a test case. The LCA analysed the environmental impacts generated by the packaging materials and incorporated the environmental impacts created by the facial cream residue left behind in each dispensing system. The system boundary of this LCA included the material production, intermediate processes, distribution, use and end‐of‐life phases of the packaged facial cream products. The LCA complied with the ISO standards, 14,040:2006 and 14,044:2006, and LCA software SimaPro v 9.0 was used to analyse the results. The life cycle inventories used in this LCA included US‐EI 2.2, USLCI and Ecoinvent 3. TRACI 2.1, including ten mid‐point life cycle impact categories, was chosen as the life cycle impact analysis method. Comparative and contribution analyses were conducted to interpret the LCA data. The comparative analysis demonstrated that the airless pump packaging system had less environmental burden than the other two packaging systems for all the life cycle impact categories. The bag‐in‐bottle alternative had the highest environmental impact for eight of the ten impact categories. The contribution analysis results revealed that the packaging material production phase most contributed to the environmental burden of all three packaging formats, followed by the lotion residue.

Eco-Efficiency Assessment Utilizing Recycled Glass Aggregate in Concrete

This paper reviews specific technical and eco-efficiency performance issues in using glass waste as an aggregate in the production of concrete. Eco-efficiency is a relatively modern tool in the pursuit of sustainability. Eco-efficiency is the concept of maximising the benefits from the use of non-renewable resources while minimising the use of non-renewable resources. The paper details a life cycle assessment and eco-efficiency review of a potentially sustainable alternative to traditional concrete, made from ordinary Portland cement. The study follows the ISO framework, which includes goal and scope, a life cycle inventory, life cycle impact assessment, life cycle costing, normalising of data and the creation of an eco-efficiency portfolio. SimaPro life cycle assessment software has been used to further analyse the use of recycled glass aggregate as a replacement for naturally occurring stone aggregate in geopolymer concrete. The study found that the use of geopolymer concrete as a non-cement based alternative concrete was a viable way to reduce emissions with a high global warming potential but faced challenges in other environmental impact areas. There is a need for ongoing research and study on the application of eco-efficiency as a tool in the pursuit of sustainable practices in society.

Benchmarking Sustainable Mobility in Higher Education

Sustainable mobility is an increasingly significant issue that both public and private organizations consider in order to reduce emissions by their members. In this paper, the Life Cycle Assessment (LCA) approach was used to evaluate sustainable mobility. Data coming from a study carried out at the University of Foggia were processed by Gabi LCA software to estimate the environmental performance of the community members according to the methodology of the Product Environmental Footprint (PEF) guidelines 3.0. Results of the LCA were organized in different classes, creating an eco-indicator of sustainable mobility that can be applied to both the institution and individual members (called the Sustainable Mobility Indicator, SMI). The SMI, computed to assess the environmental impact of the University of Foggia, was also used to evaluate the best mobility scenario, which can be considered a benchmark. The creation of the performance classes and benchmark analysis represents an easier way to communicate sustainability based on the recommendations for achieving the sustainable development goals from the 2030 Agenda adopted by all United Nations Member States. Indeed, any organization can carry out this approach to assess its environmental impact (in terms of mobility) and shape transport policies accordingly, leading to the adoption of sustainable solutions.

Can the new energy vehicles (NEVs) and power battery industry help China to meet the carbon neutrality goal before 2060?

China is working to boost the manufacture, market share, sales, and use of NEVs to replace fuel vehicles in transportation sector to get carbon reduction target by 2060. In this research, using Simapro life cycle assessment software and Eco-invent database, the market share, carbon footprint, and life cycle analysis of fuel vehicles, NEVs, and batteries were calculated from the last five years to next 25 years, with a focus on the sustainable development. Results indicate globally, China had 293.98 m vehicles and 45.22% worldwide highest market share, followed by Germany with 224.97 m and 42.22% shares. Annually China's NEVs production rate is 50%, and sales account for 35%, while the carbon footprint will account for 5.2 E+07 to 4.89 E+07 kgCO2e by 2021–2035. The power battery production 219.7 GWh reaches 150%–163.4%, whereas carbon footprint values in production and use stage of 1 kWh of LFP 44.0 kgCO2eq, NCM-146.8 kgCO2eq, and NCA-370 kgCO2eq. The single carbon footprint of LFP is smallest at about 5.52 E+09, while NCM is highest at 1.84 E+10. Thus, using NEVs, and LFP batteries will reduce carbon emissions by 56.33%–103.14% and 56.33% or 0.64 Gt to 0.006 Gt by 2060. LCA analysis of NEVs and batteries at manufacturing and using stages quantified the environmental impact ranked from highest to lowest as ADP > AP > GWP > EP > POCP > ODP. ADP(e) and ADP(f) at manufacturing stage account for 14.7%, while other components account for 83.3% during the use stage. Conclusive findings are higher sales and use of NEVs, LFP, and reduction in coal-fired power generation from 70.92% to 50%, and increase in renewable energy sources in electricity generation expectedly will reduce carbon footprint by 31% and environmental impact on acid rain, ozone depletion, and photochemical smog. Finally, to achieve carbon neutrality in China, the NEVs industry must be supported by incentive policies, financial aid, technological improvements, and research and development. This would improve NEV's supply, demand, and environmental impact.

Life cycle assessment (LCA) on waste management options for derelict fishing gear

PurposeDerelict fishing gear (DFG) is one of the most abundant and harmful types of marine litter that gets increasingly retrieved from the ocean. However, for this novel waste stream recycling and recovery pathways are not yet commonly established. To identify the most suitable waste management system, this study assesses the potential environmental impacts of DFG waste treatment options in Europe.MethodsThis study applies an attributional life cycle assessment (LCA) to four DFG waste treatment scenarios, namely a mechanical recycling, syngas production, energy recovery and landfill disposal. The scope spans from the retrieval and transport processes to pre- and end-treatment steps until the outputs are sent to landfill or assumed to substitute products or energy. Primary data was collected from retrieval and waste treatment trials in Europe. Contribution, sensitivity and uncertainty analyses were conducted using the LCA software SimaPro and ReCiPe as the impact methodology.Results and discussionThe results show that the mechanical recycling and energy recovery achieve the lowest potential environmental impacts. The syngas production and landfill disposal scenario are not environmentally competitive because they require too much electricity, or their avoided production credits were too small to offset their emissions. Unlike the pre-treatment and transport processes, the retrieval and end-treatment processes have a significant impact on the overall results. The transport distances, energy mix and market and technological assumptions are least sensitive, while changes to the waste composition significantly affect the results. Especially a reduced lead content benefits the human toxicity impact potential of the landfill disposal scenario. The uncertainty analysis showed that the results are very robust in nine of twelve impact categories.ConclusionsThis is the first LCA study that compares waste treatment options for marine litter. The results indicate that a disposal of DFG is hazardous and should be replaced with mechanical recycling or energy recovery. While this may be technologically possible and environmentally beneficial, economic and social factors should also be considered before a final decision is made. To further reduce environmental impacts, marine litter prevention should play a more important role.Graphical abstract

LCA based recommendations for the selection of eco-concretes using blast furnace slag and fly ash

The development of circular economy models for the construction sector brings important challenges and opportunities to research and particularly to make knowledge transfer, for example through public policies. Santiago de Cali, third major city of Colombia (South America), is developing a circular economy model policy, which is mainly based on waste valorisation. Among others, the model includes a family of eco-concrete products that replaces Portland cement by blast furnace slag and fly ash coming from local industries. Therefore, the aim of this research is to develop scientific based recommendations to stakeholders for the selection of different concrete products (i.e. beams, columns, slabs) using blast furnace slag and fly ash (eco-concretes). Considering that life cycle assessment (LCA) is the most employed tool for consolidating, comparing, and assessing sustainability impacts [1], the LCA of these concrete products for the design of a sustainable residential house was performed. The LCA software Building for Environmental and Economic Sustainability (BEES) developed by the National Institute of Standards and Technology (NIST) was selected for the study. Results include a discussion on the environmental impacts. Furthermore, a methodology for the selection of sustainable building materials is presented.

Concept for Automated LCA of Manufacturing Processes

Manufacturing companies are increasingly pushed towards more sustainable production by socio-political and environmental factors. In order to assess their sustainability performance, companies often use the widespread life cycle assessment (LCA) as defined by ISO 14040 and supported by various LCA software solutions. However, this is regularly associated with well-known shortcomings such as difficulties in gaining appropriate life cycle inventory data, lack of result transferability, and the amount of time needed for LCA studies. To overcome these problems, approaches for automating the LCA process have proven to be promising in other engineering disciplines (e.g., civil engineering). However, hardly any approaches to automating the LCA of manufacturing processes exist. Based on an extensive literature review, this paper presents a concept for an automated LCA of manufacturing processes. The approach consists of three steps and covers the phases of data extraction, LCA model building, and analysis. It is geared towards using implicitly existing manufacturing information and facilitating the so far mostly manual data collection and modeling processes. To conclude, an outlook is given on how the proposed concept will be further developed in an industrial setting.

Performance evaluation and life cycle assessment of electrocoagulation process for manganese removal from wastewater using titanium electrodes

Excess manganese (Mn) concentrations can pose environmental and health risks. Currently, research on Mn removal by electrocoagulation (EC) using transition metal electrodes and the determination of its potential environmental impacts is limited. This study aims to assess the electrocoagulation process's performance with a titanium electrode as a sacrificial anode while also performing a life cycle assessment (LCA) of the process. The initial pH, current density (CD), electrode spacings, electrolyte types, concentrations, and electrode arrangement were all examined. For synthetic wastewater, most of the experiments used a concentration of Mn of 2 mg/L and sodium chloride as a supporting electrolyte at a concentration of 1 g/L. LCA software (OpenLCA 1.11) was used to assess the potential environmental impacts. Optimal operating conditions within the experimental range were as follows: initial pH = 7, CD = 10 mA/cm2, gap distance = 2 cm, and 1 g/L NaCl. Under these conditions, the maximum Mn removal efficiency was 96.5% after 60 min. There was an improvement of 2% rise after 60 min when the temperature increased from 20 °C to 40 °C. For real wastewater, the highest removal efficiencies for Mn and chemical oxygen demand after 60 min were 91.3% and 92%, respectively. The pseudo second order model provides the highest coefficient of determination for expressing the experimental data. Global warming, human non-carcinogenic toxicity, and terrestrial ecotoxicity were the most important categories of impact examined in this work according to the LCA (0.00064 kg CO2 eq, 0.00018 kg 1,4-DCB, and 0.00028 kg 1,4-DCB, respectively). To effectively remove Mn using EC with Ti electrodes, it appears that a period of electrolysis of 10 min would be sufficient under most of the conditions investigated in this study. The reduction in the electrolysis time will lead to a reduction in the operating costs of the system.

How to Simplify Life Cycle Assessment for Industrial Applications—A Comprehensive Review

Life cycle assessment (LCA) has established itself as the dominant method for identifying the environmental impact of products or services. However, conducting an LCA is labor and time intensive (especially regarding data collection). This paper, therefore, aims to identify methods and tools that enhance the practicability of LCA, especially with regard to product complexity and variance. To this end, an initial literature review on the LCA of complex products was conducted to identify commonly cited barriers and potential solutions. The obtained information was used to derive search strategies for a subsequent comprehensive and systematic literature review of approaches that address the identified barriers and facilitate the LCA process. We identified five approaches to address the barriers of time and effort, complexity, and data intensity. These are the parametric approach, modular approach, automation, aggregation/grouping, and screening. For each, the concept as well as the associated advantages and disadvantages are described. Especially, the automated calculation of results as well as the automated generation of life cycle inventory (LCI) data exhibit great potential for simplification. We provide an overview of common LCA software and databases and evaluate the respective interfaces. As it was not considered in detail, further research should address options for automated data collection in production by utilizing sensors and intelligent interconnection of production infrastructure as well as the interpretation of the acquired data using artificial intelligence.

Challenges in developing a holistic Whole Building Life Cycle Assessment (WBLCA) software tool: developers’ goals

The Intergovernmental Panel on Climate Change (IPCC) recently released a report emphasizing the importance of reducing carbon emissions, indicating that the construction industry is a key player in this process. Whole Building Life Cycle Assessment (WBLCA) is the most efficient method for evaluating buildings’ environmental impacts. It considers the effects of energy consumption during operation and the environmental impacts of extracting, manufacturing, transporting, assembling, and maintaining the building’s components. However, numerous obstacles prevent WBLCA from being fully applied by decision-makers during the building project process (BPP). This paper discusses and suggests improvements to the challenges of integrating WBLCA and BPP. An online survey was performed with nine WBLCA software developers worldwide, examining the critical challenges and how to overcome them. Most participants agreed that increasing WBLCA demand is the most pressing issue. It would encourage the entire construction sector to adopt a life-cycle mindset, pushing WBLCA software developers to improve software tool integration with the BPP. Results from this study will assist software companies and policymakers develop tools and regulations more aligned with the interests of designers.

A Tier-Wise Method for Evaluating Uncertainty in Life Cycle Assessment

As a decision support tool, life cycle assessment (LCA) is prone to multiple uncertainties associated with the data, model structures, and options offered to practitioners. Therefore, to make the results reliable, consideration of these uncertainties is imperative. Among the various classifications, parameter, scenario, and model uncertainty are widely reported and well-acknowledged uncertainty types in LCA. There are several techniques available to deal with these uncertainties; however, each strategy has its own pros and cons. Furthermore, just a few of the methods have been included in LCA software, which restricts their potential for wider application in LCA research. This paper offers a comprehensive framework that concurrently considers parameter, scenario, and model uncertainty. Moreover, practitioners may select multiple alternatives depending on their needs and available resources. Based on the availability of time, resources, and technical expertise three levels—basic, intermediate, and advanced—are suggested for uncertainty treatment. A qualitative method, including local sensitivity analysis, is part of the basic approach. Monte Carlo sampling and local sensitivity analysis, both of which are accessible in LCA software, are suggested at the intermediate level. Advanced sampling methods (such as Latin hypercube or Quasi-Monte Carlo sampling) with global sensitivity analysis are proposed for the advanced level.

Whole life cycle environmental impact assessment of buildings: Developing software tool and database support for the EU framework Level(s)

The European Commission has published a framework on the environmental sustainability of buildings, called Level(s), a set of indicators addressing the resource efficiency and environmental impact of buildings. This framework is now a key element of European initiatives to develop a circular economy and aims to address whole life cycle greenhouse gas (GHG) emissions and to drive a renovation wave for existing buildings. Analysis of the whole life cycle environmental impact of buildings, with an emphasis on GHG emissions, is also the focus of initiatives in several EU Member States. To support users, Level(s) was accompanied by a list of Life Cycle Assessment (LCA) software tools and databases for calculating such indicators. A need was identified for practical, user-orientated information about the scope, consistency, cost, and accessibility of LCA software tools and databases. Therefore, a list of LCA tools and databases used in Europe for the assessment of the whole life cycle environmental impacts of buildings was compiled in 2017–2020 and their characteristics analysed based on a set of criteria. This paper describes the policy context of Level(s) and discusses criteria that can be used for the characterisation of LCA software tools and databases from the list compiled for Level(s). The methods included a literature review, surveys/interviews, and the co-creation of criteria for the categorization of tools and databases. The results are criteria including construction-specificity, system boundaries & scope, indicators, modelling granularity, methodological adherence to Level(s) and EN standards, data quality, transparency and verification, accessibility, data exchange and interoperability, cost, training and support, as well as additional information. By providing greater visibility regarding the features of tools and databases, this paper contributes to the mainstream use of Level(s) and also to the implementation of key EU policy initiatives aimed at enhancing the environmental sustainability of the built environment, such as the EU Renovation Wave, the New European Bauhaus, and the EU taxonomy for sustainable activities.

Comparing Life Cycle Assessment of Fish Preservation Method on Fishing Vessels in Indonesia

The economic benefit that the fishermen can obtain primarily depends on the quality of their catches. Therefore, it is essential to ensure that the caught fish stays fresh until entering the market. The most common fish preservation on traditional fishing boats in Indonesia is block ice, which must be carried in the fish hold from the home port. In comparison, another alternative method for fish preservation is the Flake Ice machine that can produce ice on-board. The study on Life Cycle Assessment (LCA) was conducted on these two fish preservation methods to understand the environmental impact of each technique. For undertaking the assessments, LCA software known as SimaPro was employed. The system boundary for the LCA about fish preservation applied the “well to wheels” approach and covered the whole service life of the vessel for the full consecutive 20 years of operation. The functional unit for the assessment was fish preservation of 4 tonnes during a 7-day fishing trip. The input of the evaluation was the materials and energy required to produce the amount of ice or to operate a refrigeration system for each year of the vessel’s operation, with a total of 30 trips per year. The paper explored the environmental impact of these two fish preservation methods in terms of Ozone Layer Depletion and Global Warming.

Life Cycle Data Interoperability Improvements through Implementation of the Federal LCA Commons Elementary Flow List.

As a fundamental component of data for life cycle assessment models, elementary flows have been demonstrated to be a key requirement of life cycle assessment data interoperability. However, existing elementary flow lists have been found to lack sufficient structure to enable improved interoperability between life cycle data sources. The Federal Life Cycle Assessment Commons Elementary Flow List provides a novel framework and structure for elementary flows, but the actual improvement this list provides to the interoperability of life cycle data has not been tested. The interoperability of ten elementary flow lists, two life cycle assessment databases, three life cycle impact assessment methods, and five life cycle assessment software sources is assessed with and without use of the Federal Life Cycle Assessment Commons Elementary Flow List as an intermediary in flow mapping. This analysis showed that only 25% of comparisons between these sources resulted in greater than 50% of flows being capable of automatic name-to-name matching between lists. This indicates that there is a low level of interoperability when using sources with their original elementary flow nomenclature, and elementary flow mapping is required to use these sources in combination. The mapping capabilities of the Federal Life Cycle Assessment Commons Elementary Flow List to sources were reviewed and revealed a notable increase in name-to-name matches. Overall, this novel framework is found to increase life cycle data source interoperability.