Life Cycle Assessment Analysis Research Articles

Integrating the water-energy-food nexus and LCA + DEA methodology for sustainable fisheries management: A case study of Cantabrian fishing fleets

The fishing sector constitutes an important source of economic revenue in northern Spain. In this context, various research studies have focused on the application of the five-step Life Cycle Assessment (LCA) and Data Envelopment Analysis (DEA) methodology to quantify environmental impacts of fishing systems. However, some of them have used environmental indicators that focus on individual environmental issues, hindering the goal of achieving integrated resource management. Therefore, in this study, the Water-Energy-Food (WEF) Nexus is employed as an integrative perspective that considers the synergies and trade-offs between carbon footprint, energy requirements, and water demand.The main objective of this study is to evaluate the operational efficiency and environmental impacts of Cantabrian fishing fleets. To this end, the combined use of LCA and DEA, along with the WEF Nexus, was applied to the Cantabrian purse seine fleet. DEA matrices were generated using the LCA-derived WEF nexus values as inputs to calculate efficiency scores for each vessel. Subsequently, based on the efficiency projections provided by the DEA model, a new impact assessment was performed to understand the eco-efficiency and potential environmental benefits of operating at higher levels of efficiency within this fleet.The average efficiency of the fleet was above 60 %. Inefficient units demonstrated a greater potential to reduce their environmental impacts (up to 65 %) by operating according to efficiency projections. Furthermore, the results revealed a strong dependence of environmental impacts on one of the operational inputs, i.e., fuel consumption. These findings highlight the significance of embracing holistic approaches that combine technical, economic, and social factors to achieve a sustainable balance in fisheries systems. In this regard, the five-step LCA + DEA method applied in conjunction with the WEF Nexus emerged as a suitable tool for measuring operational and environmental objectives.

An artificial intelligence approach to model and optimize biodiesel production from waste cooking oil using life cycle assessment and market dynamics analysis

Biodiesel has emerged as a viable alternative to fuel, offering a more sustainable and environmentally friendly energy option. The current study explores the modeling and optimization of biodiesel production from waste cooking oil using artificial intelligence and genetic algorithms. The study focuses on enhancing five process parameters: methanol-to-oil molar ratio, catalyst concentration, reaction temperature, reaction time, and stirring speed. The optimization of these parameters is complemented by a life cycle assessment to reduce environmental impact. The approach considers biodiesel yield, high heating value, and energy consumption as output variables, thereby advancing sustainable biodiesel production. The findings indicated that, under optimal conditions (methanol-to-oil ratio of 1:6.9, stirring rate of 500 rpm, reaction duration of 20 s, reaction temperature of 30 °C and catalyst concentration of 1), the transesterification process achieved the maximum biodiesel yield of 97.76 %. The optimization reached a low environmental impact in the production of biodiesel in an efficient way. Additionally, SWOT analysis helps to develop strategic methods that can enhance efficiency and increase competitiveness. The research suggests that, by optimizing the chemical process in biodiesel production, it is possible to achieve a high yield and high heating value of the biofuel, along with feasible environmental mitigation strategies.

Cumulative energy demand and environmental impact analysis in the manufacture of recycled fiber reinforced composites panels for use in truck bodies

ABSTRACT The reuse of fiber-reinforced composite materials has become increasingly important with the tremendous waste produced by aerospace, wind turbine blades, and automobile components. Recycling fiber-reinforced composites from parts at their end-of-life provides the benefit of reinforcing strength and integrity. The life cycle assessment (LCA) method has been widely used to examine the embodied energy (EE) and the environmental impact of the manufacturing process. Two different types of composite panels made via hand layup and compression molding are considered for a comparative LCA investigation using SimaPro software. Some panels are made with a mixture of 50% virgin glass fiber (GF) and 50% polyester resin. Others are produced with a mixture of 25% virgin GF, 25% shredded recyclates from wind turbine blade, and 50% of polyester resin. Panels from the recyclates termed Recycled Glass Fiber Reinforced Polyester (rGFRP) had 2.44% lower EE as compared to their counterparts vGFRP. Ozone depletion proved to be the greatest impact on the environment as regard to the manufacturing of rGFRP (4.38E–6 kg CFC-11eq). rGFRP panels manufacture generated 3.8% less greenhouse gas emissions than the vGFRP. LCA analysis suggests that the manufacture of panels for truck body/floor using recyclates from shredded wind turbine blades involves less energy use and has less environmental impact.

Potential Use of Irradiation Techniques in Life Cycle Assessment of Polyethylene Terephthalate (PET) Plastic Waste

Plastic waste generation makes the second largest contribution of 18.6% to the total generation of municipal solid waste. Plastic waste often becomes a problem in the environment because it does not decompose easily. Polyethylene terephthalate (PET) is one type of plastic waste. This paper aims to provide a general review of the potential for using nuclear energy in the form of irradiation techniques in assessing the life cycle of PET plastic waste. The research method used is a literature study based on several related studies. The life cycle assessment method can be used to analyze potential uses and their impacts. Life cycle assessment consists of the stages of determining objectives and scope, life cycle inventory analysis, life cycle impact assessment, and interpretation. A SWOT analysis of the PET sorting program from generation sources is needed as a complement to the life cycle assessment analysis. The potential for PET irradiation techniques is in two ways, namely direct and indirect. The first way, is PET plastic waste is exposed to a certain dose of radiation directly to degrade the material properties of PET plastic waste. The second way, PET plastic waste is substituted into other products, and then a certain dose of radiation is given. At the stage of determining life cycle goals, for example, measuring the impact of irradiation techniques on the reuse or recycling of PET plastic waste. The scope is limited to “gate to gate”, from receiving PET plastic to PET irradiation. The functional unit as a basic unit can be used based on 1 kg of PET plastic. The use of nuclear power through irradiation techniques has the potential to be used in processing PET plastic. Keywords: irradiation, polyethylene terephthalate (PET), life cycle assessment

Life Cycle Assessment and Cost Analysis of Mid-Rise Mass Timber vs. Concrete Buildings in Australia

Life Cycle Assessment and Cost Analysis of Mid-Rise Mass Timber vs. Concrete Buildings in Australia

Sustainable circular practices in the textile product life cycle: A comprehensive approach to environmental impact mitigation

The identification of environmental impacts through Life Cycle Assessment (LCA) has become a prevalent approach in recent years. However, the utilization of software tools for LCA analysis poses challenges, particularly in terms of cost, time consumption, and complexity, especially for industries operating in emerging economies. Despite these challenges, such industries are compelled to adhere to new policies and regulations when exporting products to European countries. This paper delves into the implementation of a comprehensive approach to identify the environmental impact of the product lifecycle in the textile industry, with a specific focus on recognizing circular economic potential to mitigate environmental impacts. The methodology employed includes value chain analysis, environmental impact identification, lifecycle thinking to pinpoint sustainability hotspots, prioritization of these hotspots, and identification of potential circular economic approaches to alleviate associated impacts. The paper presents a case study applying this approach to the textile industrial sector. By scrutinizing the intricacies of circular economy frameworks, the study provides insights into the challenges and opportunities associated with transitioning towards a more sustainable and circular textile industry. The findings aim to contribute valuable knowledge to global endeavors in achieving environmentally friendly practices within the textile and apparel sector.

Effect of rice husk ash and coconut coir fiber on cement mortar: Enhancing sustainability and efficiency in buildings

This research investigated energy efficiency, insulation properties together with strength properties and cost-effectiveness, focusing on developing a sustainable mortar. Cement: sand of 1: 2.25 (by weight) mortar with varying rice husk ash (RHA) and coconut coir (CC) fiber contents were prepared. Physical, microstructure, strength, durability, and thermal performances were experimentally examined. Life cycle assessment and cost analysis were numerically examined. Adding CC fiber reduced the longer final setting time found with the RHA-based mortar. With 20 % RHA and 0.5 % CC fiber, weight was reduced by 9.2 % (compared to the conventional mortar), promising a lightweight mortar. Flexural strength was increased by 8.6 % with 0.5 % CC fiber addition, this was further increased to 13.6 % with 10 % RHA in the mixture. 20 % RHA and 0.5 % CC fiber mortar exhibits a temperature difference of 8.7°C, whereas the conventional mortar exhibits a temperature difference of 2.5°C, indicating a reduced thermal conductivity of the RHA-CC fiber mortar. This mortar reduced the CO2 emission, energy consumption, and manufacturing cost by 17.7 %, 13.6 % and 7.0 %, respectively, indicating the sustainability. A cost-effective and energy-efficient lightweight mortar with enhanced thermal insulation and flexural strength was achieved by reinforcing the conventional mortar with 20 % RHA and 0.5 % CC fiber for the applications of dwellings.

Thermodynamic and life cycle assessment analysis of polymer-containing oily sludge supercritical water gasification system combined with Organic Rankine Cycle

With the development of polymer flooding technology, polymer-containing oily sludge (PCOS) has become a major pollutant on offshore oil platforms. Supercritical water gasification system is an efficient and pollution-free technology compared to conventional PCOS treatment. However, the system model for PCOS has not yet been established and the theoretical model for system optimization is insufficient. In this work, a novel auto-thermal system is established based on supercritical water gasification technology for the treatment of PCOS. Through the thermodynamic analysis, an optimization plan is concluded and used for the establishment of a modified system with Organic Rankine Cycle. Results show that the two-stage reactor reduces the gasification reaction temperature from 652 °C to 502 °C, and the Organic Rankine Cycle system using Isopropanol recover 9.1 % chemical exergy of feedstock with the optimal parameters (superheat, evaporation temperature and circulating pressure). The energy and exergy efficiency of the modified system has increased by 52.4 % and 42.4 % compared to the original system. Besides, a life cycle assessment is adopted for the environment analysis. The results show that the increasing gasification temperature and PCOS slurry concentration can reduce system unit exergy loss. Global Warming Potential reaching the minimum value of 26.1 at 65 wt%.

Leveraging Life Cycle Assessment and System Dynamics Model Analysis for an Integrated Household E-Waste Management System in Yaoundé, Cameroon

Electronic waste (E-waste) is a global environmental issue and a contemporary challenge in developing countries, where implementing sustainable E-waste management policies is required to mitigate the adverse impacts of inappropriate treatment and disposal. This study assesses the environmental and human health impacts of the current E-waste management system in Yaoundé. The study then proposes an integrated E-waste management system (IEMS) with policy instruments for increased formal E-waste collection and reduced environmental impacts from informal E-waste treatment. Life cycle assessment (LCA) was utilized to identify high-impact contributing processes within the current E-waste management system (EMS) and to determine the optimum scenario for an integrated system. The system dynamics model (SDM) analysis ascertained the efficiency of the E-waste policy under the IEMS. Results show that the IEMS can reduce global warming potential, fine particulate matter formation, and human carcinogenic toxicity from one ton of E-waste treatment by 27%, 16.3%, and 34%, respectively. Regarding the policy efficiency simulation for the IEMS, the policy instrument (Policy 1), with levies on electronic appliance producers, proved environmentally efficient in reducing the quantity of informal recycling. It was also more economically viable for the recycling fund to increase formal E-waste collection and subsidize formal treatment within the context of the IEMS. The study outcome is informative for E-waste management policy planning in developing economies.

Ecological Costs of A Microbrewery in The Brazilian Northeast

Objective: The aim of this study is to investigate the environmental and economic impacts of craft beer production in the Brazilian Northeast, to evidence the main hotspots and propose mitigation alternatives. Theoretical Framework: Life Cycle Thinking proposes a way of thinking that aggregates systems and preserves their interrelationships, to understand the whole of production systems and identify critical points in their subsystems, processes and flows. Here, environmental analysis was carried out through Life Cycle Assessment and economic analysis through Life Cycle Cost Assessment and Ecological Costs. Method: The methodology adopted for this research includes the use of Life Cycle Assessment to quantify environmental emissions, and Life Cycle Cost Assessment and Ecological Costs to quantify economic impacts in a microbrewery located in the Northeast of Brazil. Data was collected through interviews and questionnaires with those responsible for specific sectors of the brewery. Results and Discussion: The results showed that the main environmental hotspot was the local and regional distribution of beer using a gasoline-powered light commercial vehicle. In terms of economics, beer packaged in stainless steel kegs had the lowest cost and beer in aluminum cans had the highest manufacturing cost. When environmental costs were taken into account, beer packaged in a PET growler obtained the best result and beer packaged in a stainless-steel keg obtained the worst economic result. With the implementation of electric vehicle distribution, in addition to the environmental benefits, there were also economic benefits, especially in terms of environmental costs (ecocosts). Research Implications: The practical implications of this research have shown that the use of electric vehicles to distribute the final product (beer) can mitigate environmental emissions, bringing environmental and economic benefits to the company studied. Originality/Value: This study contributes to the literature by being the first Brazilian study to quantify the environmental and economic impacts of craft beer production and distribution. The relevance and value of this research is evidenced by the fact that it proposes tangible solutions to the hotspots identified.

Evaluation of Life Cycle CO2 Emissions for the LDR-50 Nuclear District Heating Reactor

The LDR-50 low-temperature nuclear reactor is designed for the Finnish and European district heating markets, as an environmentally sustainable heating option for the 2030s. While the carbon footprint of conventional electricity-producing reactors is known to be small, there have been no comprehensive studies on the emission reduction potential when the technology is applied to the heating sector. This paper aims to fill this knowledge gap by means of life cycle assessment (LCA) analysis. The carbon footprint of the LDR-50 heating plant is evaluated, and compared to conventional heating fuels, direct electric heating, and heat pumps. The results of the analysis show that the life cycle CO2 emissions are low, although there are still significant uncertainties related to the construction phase, due to missing data. In addition to carbon footprint, the analysis is also extended to other adverse environmental impacts. It is concluded that significant reductions in CO2 emissions can be achieved by replacing fossil heating fuels with nuclear energy. The technology is considered a viable option alongside biofuels and heat pumps. The overall environmental impacts are low, and the production does not compete for low-carbon electricity or scarce natural resources.

Life Cycle Assessment and Net Energy Analysis of an Integrated Hydrothermal Liquefaction-Anaerobic Digestion of Single and Mixed Beverage Waste and Sewage Sludge

Conversion of biomass to bioenergy is one of the approaches to creating a sustainable society. In this study, the life cycle assessment and the net energy analysis of converting mixed sewage sludge and beverage waste into bioenergy via a combined hydrothermal liquefaction-anaerobic digestion (HTL-AD) system was carried out. Primary sludge (PS), winery rose lees (RL), brewery Trub (BT), the mixture of brewery trub and primary sludge (BTPS) and the mixture of winery rose lees and primary sludge (RLPS) were the feedstocks considered. Efficient energy utilization [in form of net energy ratio (NER)], and environmental emissions were evaluated. The NER of BT (2.07) and RL (1.76) increased when mixed with PS (3.18) to produce BTPS (3.20) and RLPS (2.85). Also, the HTL phase of the combined HTL-AD system produced a greater energy efficiency than the AD phase in BT, BTPS, and PS and vice-versa in RL and RLPS. Six environmental impact categories were studied namely global warming, terrestrial acidification, ionizing radiation, terrestrial ecotoxicity, human carcinogenic toxicity, and human non-carcinogenic toxicity with RL producing the greatest impact and BTPS producing the least, thus indicating the advantage of a combined feedstock process. This study shows that the combination of feedstock for bioenergy production in an HTL-AD systems does not only increase the quality and quantity of products but also increases the overall NER as well as the reduction of environmental impacts. The study also proved that the integrated HTL-AD system resulted in a greater efficient energy and resource utilization and a lesser environmental footprint than the individual HTL and AD systems.

Thermodynamic and life cycle assessment analysis of polymer-containing oily sludge supercritical water gasification system combined with Organic Rankine Cycle

With the development of polymer flooding technology, polymer-containing oily sludge (PCOS) has become a major pollutant on offshore oil platforms. Supercritical water gasification system is an efficient and pollution-free technology compared to conventional PCOS treatment. However, the system model for PCOS has not yet been established and the theoretical model for system optimization is insufficient. In this work, a novel auto-thermal system is established based on supercritical water gasification technology for the treatment of PCOS. Through the thermodynamic analysis, an optimization plan is concluded and used for the establishment of a modified system with Organic Rankine Cycle. Results show that the two-stage reactor reduces the gasification reaction temperature from 652 °C to 502 °C, and the Organic Rankine Cycle system using Isopropanol recover 9.1 % chemical exergy of feedstock with the optimal parameters (superheat, evaporation temperature and circulating pressure). The energy and exergy efficiency of the modified system has increased by 52.4 % and 42.4 % compared to the original system. Besides, a life cycle assessment is adopted for the environment analysis. The results show that the increasing gasification temperature and PCOS slurry concentration can reduce system unit exergy loss. Global Warming Potential reaching the minimum value of 26.1 at 65 wt%.

Life Cycle Assessment of an Office Building in Finland Using a Custom Assessment Tool

Life cycle analysis (LCA) is a crucial instrument in the construction industry, offering a comprehensive evaluation of the environmental impacts at every stage of a building’s lifecycle. Recently introduced into Finnish construction legislation, this approach has not yet been thoroughly researched in relation to the Finnish Ministry of the Environment (FMoE) assessment method, nor have new calculation techniques been proposed to address its shortcomings. Furthermore, Finnish research on environmental impact assessment has predominantly focused on residential buildings, leaving a scarcity of studies on office buildings. This paper aims to fill these gaps in the literature, considering LCA, carbon footprint, and carbon handprint assessment tools of concrete-, timber-, and steel-framed cases. Our results are as follows: (1) the majority of the carbon footprint of a concrete-framed case originated from emissions associated with energy use and second largest share of total emissions occurred during the product phase of the building and within this phase, the building services contribute the most to product-related emissions; (2) a significant portion of these emissions came from facades and floor structures; (3) the carbon footprint of the timber-framed option was significantly lower than that of its concrete- and steel-framed counterparts; (4) steel-framed option’s carbon footprint was nearly equivalent to that of the concrete-framed option; (5) estimated carbon handprint of the timber-framed option was considerably higher than that of the concrete- and steel-framed options, primarily due to the carbon storage capacity of the timber components; (6) steel-framed option’s carbon handprint surpassed that of the concrete-framed option because of the high recycling and reuse potential of steel components; (7) the LCA method used by FMoE has some unclear areas. These ambiguities include how to assess the impacts of carbonation in cement-based products and the replacement of building components.

A comparative analysis of recent life cycle assessment guidelines and frameworks: Methodological evidence from the packaging industry

In recent years, a number of new guidelines and frameworks for Life Cycle Assessment (LCA) have emerged, trying to support analysts in dealing with certain methodological issues and “gaps” of the ISO 14040-44, that are still the main LCA reference standards. This trend can be considered as positive, because the lack of shared, standardised and more detailed rules regarding LCA has affected for years the consistency of LCA analyses and their potential comparisons. However, the proliferation of guidelines and frameworks can also have negative consequences, first of all related to the potential resulting confusion and the lack of a clear reference for LCA analysts. These potential risks are particularly accentuated for multinational companies, which deal with many clients, in different markets, countries and sectors, and have to conform their analyses to different requirements each time.Focusing on the plastic packaging industry, this study compares six LCA guidelines and frameworks to highlight their similarities and differences. The documents selected to be analysed were: three documents applicable to products in general (ILCD, PAS 2050 and PEF), two packaging-specific guidelines (Pathfinder Framework and SPICE Methodological Guidelines) and a product specific standard for the packaging industry (PCR 2013:19). The methodological aspects analysed and compared, grouped according to the LCA stages, are: units of analysis; system boundaries; allocation methods; cut-off criteria; end-of-life; packaging; storage; biogenic CO2 emissions; carbon removals and carbon content; land use; offsets; impact categories and indicators; LCA methods and models; normalisation and weighting; data quality; sensitivity analysis. The aim is to understand to what extent potential differences may impact on companies and LCA analysts who conduct the assessments. Results highlight that the six guidelines and frameworks analysed are not always aligned and that, although some misalignments can be easily addressed, others could negatively affect the reliability of the analyses conducted.

Biomass waste-assisted micro(nano)plastics capture, utilization, and storage for sustainable water remediation

Micro(nano)plastics (MNPs) have become a significant environmental concern due to their widespread presence in the biosphere and potential harm to ecosystems and human health. Here, we propose for the first time a MNPs capture, utilization, and storage (PCUS) concept to achieve MNPs remediation from water while meeting economically productive upcycling and environmentally sustainable plastic waste management. A highly efficient capturing material derived from surface-modified woody biomass waste (M-Basswood) is developed to remove a broad spectrum of multidimensional and compositional MNPs from water. The M-Basswood delivered a high and stable capture efficiency of >99.1% at different pH or salinity levels. This exceptional capture performance is driven by multiscale interactions between M-Basswood and MNPs, involving physical trapping, strong electrostatic attractions, and triggered MNPs cluster-like aggregation sedimentation. Additionally, the invivo biodistribution of MNPs shows low ingestion and accumulation of MNPs in the mice organs. After MNPs remediation from water, the M-Basswood, together with captured MNPs, is further processed into a high-performance composite board product where MNPs serve as the glue for utilization and storage. Furthermore, the life cycle assessment (LCA) and techno-economic analysis (TEA) results demonstrate the environmental friendliness and economic viability of our proposed full-chain PCUS strategy, promising to drive positive change in plastic pollution and foster a circular economy.

Opportunities to reduce environmental burden by recycling fabric waste in a woollen fabric company

PurposeWool fiber is accepted as one of the natural and renewable sources and has been used in the apparel and textile industry since ancient times. However, wool fiber has the highest global warming potential value among conventional fibres due to its high land use and high methane gas generation. This study aimed to recycle the wool fabric wastes and also to create a mini eco-collection by using the produced yarns.Design/methodology/approachThis manuscript aimed to evaluate the fabric wastes of a woolen fabric producer company. Fabric wastes were opened with two different opening systems and fiber properties were determined. First, conventional ring yarns were produced in the company’s own spinning mill by mixing the opened fibres with the long fiber wastes of the company. In addition, opening wastes were mixed with different fibres (polyester, long wool waste, and Tencel fibres) between 25% and 70% in the short-staple yarn spinning mill and used in the production of conventional ring and OE-rotor yarns. Most of the yarns contained waste fibres at 50%. Recycled and virgin yarns were used as a weft and warp yarn and a total of 270 woven fabric samples were obtained and fabric properties were examined. Also, a fabric collection was created. A life cycle assessment (LCA) was made for one of the selected yarns.FindingsAt the end of the study, it was determined that it was possible to produce yarn and fabric samples from fiber blends containing high waste fiber ratios beyond 50%. All the woven fabric samples produced from conventional ring and OE-rotor yarns gave higher breaking, tearing and stitch slip strength values in the weft and warp direction than limit quality values of the company. In addition, abrasion resistance and WIRA steam stability properties of the fabric samples were also sufficient. Environmental analysis of the recycling of the wastes showed a possible decrease of about 9940034.3 kg CO2e per year in the global warming potential. In addition, fiber raw material expenses reduced yarn production cost about 50% in case of opened fabric waste usage. However, due to insufficient pilling resistance results, it was decided to evaluate the woven fabrics for the product groups such as shawls and blankets, where pilling resistance is less sought.Originality/valueThe original aspects of the article can be summarized under two headings. First, there are limited studies on the evaluation of wool wastes compared to cotton and polyester fibres and the number of samples examined was limited. However, this study was quite comprehensive in terms of opening type (rag and tearing), spinning systems (long and short spinning processes), fiber blends (waste 100% and blends with polyester, long wool waste and Tencel fibres) and yarn counts (coarser and finer). Recycled and virgin yarns were used as a weft and warp yarn and a total of 270 woven fabric samples were obtained using different colour combinations and weave types. All processes from fabric waste to product production were followed and evaluated. Life cycle assessment (LCA) and cost analysis was also done. The second unique aspect is that the problem of a real wool company was handled by taking the waste of the woolen company and a collection was created for the customer group of the company. Production was made under real production conditions. Therefore, this study will provide important findings to the research field about recycling, sustainability etc.

Evaluating novel building products through a building design-oriented LCA approach: Example of VIPs in terrace applications

Abstract INTRODUCTION: The construction industry is considered conservative in adopting new products/technologies, and environmental characteristics are one of the most important features of novel solutions. In this context, our study aims to present a building design-oriented assessment of a novel building product by extending the functional unit scope and involving multiple realistic building design scenarios. The task will be performed using the example of vacuum insulation panels (VIPs), a superinsulation product that can be used in various building applications. The study will focus on terrace insulation applications, where VIPs are an attractive solution for building designers due to the possibility of barrier-free floor design. However, they lack environmental evaluation. METHOD: A life cycle assessment (LCA) analysis is performed on two hypothetical buildings located in Ljubljana (Slovenia) for the cradle-to-gate and operational energy life cycle stages (A1-A3 + B6 according to EN 15978). A whole-year dynamic thermal response simulation was executed using the Design Builder software. Five barrier-free terrace design scenarios that influence the embodied and operational carbon footprint (while maintaining the functional and architectural integrity of the building design) were examined. RESULTS: The study showed that although EPS insulation showed a smaller embodied carbon footprint on the product level, the building level analysis showed that using VIPs in terrace applications leads to favourable or comparable environmental impact. CONCLUSIONS: Building products can be evaluated on three functional unit levels: product, application and building. By extending the boundaries from the product/application level to the entire building level, the study provides an example of a building design-oriented approach to LCA. The complexity increases by upgrading the functional unit scope to the building level, while the results become more case-specific and less general. Ideally, a novel building product should show environmental superiority on all three levels. However, as there are almost countless design possibilities in buildings, environmental superiority (or inferiority) on the product level does not necessarily indicate superiority (or inferiority) on the building level.

Offshore wind-driven green hydrogen: Bridging environmental sustainability and economic viability

This study investigates the environmental and financial implications of an offshore wind-driven green hydrogen generation system using Life Cycle Assessment (LCA) and Life Cycle Cost Analysis (LCCA) methodologies. Global Climate Models (GCM) are employed to predict wind speeds crucial for system efficacy, followed by sizing the electrolyser system based on projected offshore wind power output. As a result of this study, LCA utilizing the GREET 2023 reveals a Global Warming Potential (GWP) of 0.7 kgCO2-eq./kgH2 and 0.753 kgCO2-eq./kgH2 for GWP-20 and GWP-100, respectively. Fine Particulate Matter Formation (FPMF) is calculated as 0.24 gPM2.5/kgH2 for FPMF-20 and 0.53 gPM2.5/kgH2 for FPMF-100. In LCCA, under the base scenario, the Net Present Cost (NPC) and Levelized Cost of Hydrogen (LCOH) are estimated at $49.65 million and $4.36/kgH2, respectively. Despite various incentives and tax scenarios explored, it is revealed that Internal Rates of Return (IRRs) fall below the anticipated cost of equity, indicating non-profitability.

Assessing the Impact of Recycled Building Materials on Environmental Sustainability and Energy Efficiency: A Comprehensive Framework for Reducing Greenhouse Gas Emissions

In this study, we critically examine the potential of recycled construction materials, focusing on how these materials can significantly reduce greenhouse gas (GHG) emissions and energy usage in the construction sector. By adopting an integrated approach that combines Life Cycle Assessment (LCA) and Material Flow Analysis (MFA) within the circular economy framework, we thoroughly examine the lifecycle environmental performance of these materials. Our findings reveal a promising future where incorporating recycled materials in construction can significantly lower GHG emissions and conserve energy. This underscores their crucial role in advancing sustainable construction practices. Moreover, our study emphasizes the need for robust regulatory frameworks and technological innovations to enhance the adoption of environmentally responsible practices. We encourage policymakers, industry stakeholders, and the academic community to collaborate and promote the adoption of a circular economy strategy in the building sector. Our research contributes to the ongoing discussion on sustainable construction, offering evidence-based insights that can inform future policies and initiatives to improve environmental stewardship in the construction industry. This study aligns with the European Union’s objectives of achieving climate-neutral cities by 2030 and the United Nations’ Sustainable Development Goals outlined for completion by 2030. Overall, this paper contributes to the ongoing dialogue on sustainable construction, providing a fact-driven basis for future policy and initiatives to enhance environmental stewardship in the industry.