Levels Of Organic Contaminants Research Articles

Decoupling Sources of Anthropogenic Influences on Sediments of the Visovac Lake (Krka National Park, Croatia) Using Multiparametric Approach.

Historical changes of sediment characteristics and levels of inorganic and organic contaminants were studied in dated sediment cores from the Visovac Lake, situated in the Krka National Park, Croatia, to identify the main sources of anthropogenic pressures on this highly protected system. Depth distributions of lithogenic elements showed a steady decrease of terrigenous inputs due to the reduction in agricultural activities in the area, which was particularly pronounced during the 1991-1995 war in Croatia. Vertical and longitudinal distributions of Cd and Zn indicated that they are predominately of anthropogenic origin. The historical profiles of these toxic metals coincide well with the recorded production of metal industry in the upper reach of the Krka River with a sharp decrease reflecting the interruption by the war and slow recovery afterwards. By contrast, the recovery of the tourist industry in Krka NP after the war was accompanied by increasing contamination by elements characteristic of boat and car traffic (Sn, Cu, Pb) as well as oil pollution. The contamination with polycyclic aromatic hydrocarbons and polychlorinated biphenyls was only moderate. Although levels of metallic and organic contamination can be considered relatively low, the observed shift from industrial to tourism-related sources indicated that touristic activities should also be regarded as a possible threat for this vulnerable karst aquatic ecosystem.

Evaluation of the Efficacy of Disinfectants in Reducing Contamination of Bacterial and Viral Murine Pathogens on Gloved Hands

Disinfectant application to gloved hands before handling SPF mice is standard practice to minimize transmission of pathogens and microbial contamination between cages. The risk of contamination with murine pathogens on gloves as well as the efficacy of disinfectant application for this step is largely unknown. This study aimed to determine if murine norovirus (MNV), Helicobacter spp., and Rodentibacter spp. are detectable on gloved hands and, if they are, to evaluate how effective the application of a hydrogen peroxide-based disinfectant (Rescue) or 70% ethanol is in reducing the transfer of these pathogens while handling multiple cages of mice. Mice with natural infections of these pathogens were handled without the application of any disinfectant and the gloves were swabbed for PCR testing. All pathogens were detected via PCR with Helicobacter spp. the most frequently transferred in 83% of the cages handled. The mice were then divided into 4 treatment groups based on the product applied to gloves before handling: Rescue, 70% ethanol, sterile water, and no product. Mice in each cage were briefly handled, and the gloves were swabbed with ATP swabs after each cage and swabs for PCR testing after handling 4 and 9 cages, consecutively. All pathogens were detected via PCR in all treatment groups, and neither Rescue nor 70% ethanol was superior to water or no product in reducing contamination. Rescue and 70% ethanol were effective in maintaining lower levels of organic microbial contamination than water and no product for consecutive handling of up to 3 and 4 cages of mice, respectively. This study indicates that exposure to MNV, Helicobacter spp., and Rodentibacter spp. from handling mice is a risk and the application of Rescue or 70% ethanol is not completely effective in eliminating transfer of these pathogens.

Insights in the wettability of hard chromium coated steel for cold rolling applications

The use of toxic Cr (VI) in the chrome plating process poses significant health risks, highlighting the urgent need to find sustainable alternatives for many applications such as cold rolling. Understanding key properties of functional chrome coating in lubricated industrial processes, especially its wetting properties that can support lubrication, low friction, and durability, is essential for the development of safer coating processes. However, the wetting properties of hard chromium coating are not fully understood. This study investigates the wetting characteristics of chromium coatings in comparison to uncoated steel. The study explores the dynamic wetting behavior by conducting contact angle measurements with water and lubricant oil, determining surface free energy using the sessile drop method, and characterizing the surface through X-ray photoelectron spectroscopy analysis. The findings reveal that a standard hard chrome coating exhibits superior wettability by both water and oil and higher surface energy compared to uncoated steel. The research, supported by theoretical modelling, highlights that factors are not limited to chromium alone, but rather involve a multilayer system that includes chromium oxide and organic contaminations, which have a substantial impact on surface properties and wettability. Increased levels of organic contamination on the chrome-coated surface, are shown to result in weaker intermolecular interactions with the contacting fluid, leading to reduced surface affinity to water and consequently result in higher contact angles. Our findings provide critical insights into the intricate nature of chromium coatings and lay foundations for developing sustainable alternatives.

Effectiveness of advanced oxidation process for the pretreatment of mixed agrofood industrial wastewater from Nablus City, Palestine

ABSTRACT Food processing industries generate complex effluent with high levels of organic and inorganic contaminants. Without proper treatment, significant operational, environmental, and public health issues may arise. This study aimed to assess the Fenton reaction’s efficacy as an advanced oxidation process (AOP), to treat mixed dairy and slaughterhouse effluent from Nablus city. Bench-scale tests showed inadequate results (45.2% COD removal) because of high pollution levels (COD: 15400 -18,100 mg L−1). Further tests have combined the Fenton process with three pre-treatment methods: (A) coagulant addition, (B) settling, and (C) flocculent application. Fenton’s process with flocculent achieved significant removal of organic (88.4% COD; 84.1% TKN) and inorganic (91.0% TSS; 62.4% TS) contaminants under optimised conditions (H2O2/COD ratio 2:1, H2O2/Fe + 2 ratio 10:1, pH = 3). Treated wastewater from trial (C) let meeting local regulatory standards with COD levels below 2,000 mg/l.

Removal of calcium and magnesium ions from reverse osmosis concentrate using a two-stage precipitation with carbonation process.

The reverse osmosis (RO) technique has been extensively employed in the advanced treatment of industrial water and wastewater. However, this process results in the production of a significant quantity of reverse osmosis concentrate (ROC), which contains high levels of salinity and organic contaminants, thereby posing serious environmental problems. This study reported a two-stage precipitation process utilizing quicklime (CaO) and caustic soda (NaOH) in conjunction with air blowing (carbonation) for the removal of Ca2+ and Mg2+ from real brackish water ROC of factory. In stage I, the CaO precipitation-carbonation process was employed to eliminate the majority of Ca2+ from the ROC, while leaving Mg2+ virtually unaffected, yielding high-purity CaCO3 precipitates. In stage II, the NaOH precipitation method was utilized to eliminate the remaining Ca2+ and Mg2+ from the ROC. It was demonstrated that under optimal conditions, the removal rates of Ca2+ and Mg2+ exceeded 97%. Finally, the characterization of precipitates demonstrated the generation of high-purity CaCO3 precipitates in stage I, as well as the formation of CaCO3 and Mg(OH)2 precipitates in stage II. The results confirmed the feasibility of employing the two-stage precipitation with carbonation process to economically treat ROC and enable its reuse, offering valuable insights for the treatment of industrial wastewater.

Once through continuous mode electrocoagulation for tannery wastewater remediation: Process optimization and performance evaluation

The treatment of wastewater from tannery industries poses significant challenges due to high levels of tannic acid and chemical oxygen demand (COD), along with low biodegradability. To address this issue, we conducted a study focusing on the use of Electrocoagulation (EC) as a treatment process for synthetic tannery wastewater. Iron (Fe) electrodes have been used as anode and cathode as well. The electrodes size (7 cm × 7 cm) has been used in this process. The investigation of removal efficiencies entailed the assessment of total organic carbon (TOC) and chemical oxygen demand (COD) as indicators of organic contaminant levels within the wastewater. The influence of current density, pH, flowrate, and time on the treatment was measured. At a current density of 51 A/m2 with 83.54 % of COD removal and 27 % of TOC removal were observed. The maximum COD removal was found at pH 4.93, flowrate 5 ml/min, current 0.953 A and time 115 min. The current investigation demonstrated the efficacy of the electrocoagulation process in reducing both total organic carbon (TOC) and chemical oxygen demand (COD) levels in synthetic tannery wastewater.

Influence of water quality and seasonal variations on freshwater macroinvertebrate diversity and community structure in wastewater treatment ponds, Phetchaburi Province, Thailand

Wastewater originating from the Phetchaburi municipality undergoes treatment in a series of five distinct stages at the King’s Royally Initiated Leam Phak Bia Environmental Research and Development Project (LERD) in Phetchaburi province, Thailand. These stages involve a sedimentation (pond 1), three oxidation ponds (ponds 2 to 4), and a final stabilization pond (pond 5). These ponds serve as habitats for macroinvertebrates; consequently, their diversity and composition might be influenced by fluctuations in water quality and seasonal variations. The primary aim of this research was to analyze the diversity and species composition of macroinvertebrate communities concerning varying levels of organic contamination across the five wastewater treatment ponds at LERD. This investigation spanned three seasons: cold season (December 2019), rainy season (July 2020), and hot season (April 2021). The findings revealed that the diversity and species composition of macroinvertebrate communities displayed distinct alterations across multiple environmental gradients, especially identifying the significant influence of organic loading levels observed in ponds 1 to 5. The macroinvertebrate communities exhibited two distinct groupings, with the Chironomidae and Candonidae or ostracods prevailing prominently in ponds 1 and 2 (heterogenous environments). This prevalence was attributed to the high levels of detrital food and the robust resilience of chironomid larvae and ostracods to organic pollution, thriving even in environments characterized by low dissolved oxygen levels. Conversely, the prevalence of snails from the Thiaridae family in ponds 3 to 5 (homogenous environments) indicated improved water quality conditions, notably lower organic matter levels, and a higher dissolved oxygen content. In addition, the study identified seasonal variations in macroinvertebrates, likely influenced by the differing organic loading and environmental conditions. Thus, this research provided insights into the factors shaping macroinvertebrate communities in a wastewater treatment system.

Presence of polycyclic aromatic hydrocarbons and persistent organochlorine pollutants in human Milk: Evaluating their levels, association with Total antioxidant capacity, and risk assessment

Breastfeeding provides numerous health benefits for both infants and mothers, promoting optimal growth and development while offering protection against various illnesses and diseases. This study investigated the levels of polychlorinated biphenyls (PCB), organochlorine pesticides (OCP) and polycyclic aromatic hydrocarbons (PAH) in human milk sampled in Zadar (Croatia). The primary objectives were twofold: firstly, to evaluate the individual impact of each compound on the total antioxidant capacity (TAC) value, and secondly, to assess associated health risks. Notably, this study presents pioneering and preliminary insights into PAH levels in Croatian human milk, contributing to the limited research on PAH in breast milk worldwide. PCB and OCP levels in Croatian human milk were found to be relatively lower compared to worldwide data. Conversely, PAH levels were comparatively higher, albeit with lower detection frequencies. A negative correlation was established between organic contaminant levels and antioxidative capacity, suggesting a potential link between higher antioxidative potential and lower organic contaminant levels. Diagnostic ratio pointed towards traffic emissions as the primary source of the detected PAH. The presence of PAH suggests potential health risk, underscoring the need for further in-depth investigation.

Optimizing the Glass Bead Sterilization Protocol Focusing on Removal of Organic and Bacterial Intraoperative Contamination.

Validated glass bead sterilization protocols to effectively sterilize rodent surgical instruments after bacterial exposure (for example, cecal contamination) are lacking. To refine current approaches, we added either a multienzyme detergent, neutral pH detergent, or chlorhexidine scrub step before glass bead sterilization of forceps or needle drivers exposed to cecal contents. We exposed sets of forceps and needle drivers to cecal contents, which were then air dried for 3 min. Immediately after, the instruments were wiped several times with a clean, dry paper towel. The contaminated tips were soaked in either a multienzyme or neutral pH detergent (t = 5 min), chlorhexidine scrub (t = 2 min), or no pretreatment solution. To further increase debris removal, instruments (from all groups) were brushed using a clean toothbrush. The nonpretreatment instruments were briefly soaked in saline before brushing. After being rinsed with sterile water, all instruments were exposed to a glass bead sterilizer for 60 s at 500 °F (260 °C). Sets were then swabbed for bacterial culturing. Swabs were plated onto either sheep blood agar (n = 23) or chocolate agar (n = 20) for aerobic culturing or Brucella agar (n = 20) for anaerobic culturing. A subset of instruments was sampled to determine organic material presence after treatment using an ATP luminometer (n = 21). Multiple agar types and bioluminescence were used to more deeply evaluate tool sterility and to differentiate the relative effectiveness of each protocol. From the saline group, only one pair of forceps yielded growth on Brucella agar, and 2 pairs yielded growth on chocolate agar. No other bacterial growth was observed. The use of a pretreatment agent also lowered overall organic contamination levels in needle drivers compared with using only saline. These results indicate that brushing instruments to mechanically remove debris from instruments is paramount to ensure sterility. However, a best practice would be to also use one of the pretreatment options used in this study.

Determination of organic contamination levels by the ABC Method (Abundance/Biomass Curves) in intertidal estuarine flats using hierarchical design

Determination of organic contamination levels by the ABC Method (Abundance/Biomass Curves) in intertidal estuarine flats using hierarchical design

Accouterments of organic pollution on autotomy and regeneration of Sesarma boulengeri (Calman, 1920) in Shatt al-Arab, Basrah, Iraq

Sesarma boulangeri (Calman 1920), a type of freshwater invertebrate, was collected between January and December 2022 from three stations at the Shatt AL-Arab River, Basrah/ Iraq in order to conduct the research. The goal of the study was to determine the effect of organic pollution on autotomy in this species of crab. The organisms were subjected to varying levels of organic contamination in the river that came from sewage, farming activities, boat traffic, and transportation of products and oil derivatives using the organic pollution index (OPI). The left fifth leg's object was the reason for the autotomy. According to the characteristics of the water quality impacted by the oscillation, the cut creatures have varied indicators in response to the aquatic species. As a result, an extended period of growth for the regenerated portions is caused by the rise in organic contaminants in the water. Thus, the present findings indicate that S. boulengeri exposed to high amounts of organic pollution has a slower rate of replacing the cut component than control animals, that the growing bud is more vulnerable to distortion, and that the period of compensating for the cut part is longer. According to the OPI result shows that the first station has significant difference (P<0.05) as compared to the sconed and third stations wish did not difference.

Electrocoagulation Coupled to Electro-Oxidation for the Electrochemical Treatment of Hemodialysis Wastewater

Hemodialysis is an extracorporeal kidney replacement procedure to remove impurities or waste products from the blood used to treat kidney failure. During this process, large amounts of water are used, which, lacking control, end up in sewage systems, potentially flushing high levels of organic and inorganic contaminants into the receiver’s aqua biota. In recent years, a hybrid electrocoagulation (EC) and electro-oxidation (EO) process in sequential or simultaneous coupling has been used for the treatment of wastewater.This research considered synthetic water from hemodialysis under acid and basic conditions. To better simulate the presence of organic compounds, 10 mg L-1 of amoxicillin (AMX), an antibiotic commonly present in wastewater from clinics and hospitals, was added. Laboratory and pilot tests were performed using coupled EC and EO. They used stainless-steel (SS-304) and aluminum (Al-6061) as sacrificial anodes that were compared in acidic and basic pH during EC. The SS-304 rod anode and a titanium (Ti) mesh cathode were used during EC in acidic conditions at a field strength of 3.0 V, which was applied for 60 min. After EC, the solution obtained was filtered to separate precipitates. The supernatant was then treated with EO using an IrO2-Ta2O5|Ti (70:30) anode and the Ti mesh cathode while applying 10 mA for 120 min. The wear of the SS-304 anode was identified by scanning electron microscopy (SEM) and microanalysis (EDS). Removal of organic compounds, including AMX, was significant. This result was confirmed by decreased concentration found by diode coupled chromatography (UPLC-UV-Vis) detection.In conclusion, combining EC and EO in a sequential arrangement for the treatment of hemodialysis wastewater was carried out. EC was performed using a cylindrical SS-304 bar electrode (f = 0.8 cm) as an anode and a concentric Ti mesh as the counter electrode. A 3.0 V cell potential was maintained over one hour of electrolysis in acidic pH (pH = 5.06, s = 227 mS cm-1). This treatment yielded a removal efficiency of 86 ± 1.25 % of AMX contaminate (pH = 8.21, s = 217.26 mS cm-1, i = 11.36 mA, E = 0.568 kWh m-3). After EC, it was necessary to include a filtration or separation process to remove the Fe(OH)3 and [AMX-cation-AMX] sludge generated (2.3 g). This separation employed a settler. Subsequently, the supernatant was placed in an EO cell to remove residual organic compounds as AMX. It used a similar cell arrangement as in EC but changed the anode to IrO2-Ta2O5|Ti (70:30) (f = 0.5 cm) to perform the EO of the pharmaceutical product. During this step, the team achieved an overall removal efficiency of AMX of 100 % (pH = 8.14, s = 179.83 mS cm-1, E = 500 kWh m-3). EO was performed using a continuous 10 mA cell current for 2 h. EO generated reaction products ADP 1, ADP 2, and ADP 3. Additionally, this process decreased the content of ‘salty’ cations: Na+, K+, Ca2+, and Mg2+, while generating Cl2 gas at the electrode.

Characteristics of gasification chars – Results from a screening campaign

Despite several useful characteristics like high carbon content, large BET surface area and narrow particles size distribution, the solid residues from wood gasification, i.e. gasification chars, are rarely used and commonly considered as wastes. Furthermore, marketing of these materials is hampered by a limited knowledge base on their characteristics from different gasification technologies, an incomplete understanding on influencing factors and a lack of standardization both for the material itself and the analytical procedures that have to be employed for their characterization. To provide a basis for standardization and future utilization perspectives, a screening was performed covering a wide range of gasification technologies. The samples were analyzed for ash content, moisture, volatiles, fixed carbon and elemental composition as well as the content of polycyclic aromatic hydrocarbons (PAHs) and volatile aromatic hydrocarbons. In total, analysis data of 118 gasification char samples from plants of 17 different gasification plant manufacturers have been evaluated. The results indicate a wide variation in the characteristics of gasification chars both with respect to ash and carbon content, i.e. 3.9%–100% and 0.9–92.5%, respectively. Particularly high levels of organic contaminants are associated with samples originating from cold gas filtration with PAH contents of up to 130 g kg−1 and post-treatment would be necessary in most cases to qualify these materials for material applications. Hot gas filtration and thermal post-treatment was found to result in gasification chars with substantially lower levels of organic contaminants. For these materials, the PAH contents rarely exceeded 2 g kg−1.

Biogenic polymer nanoparticles to remove hydrophobic organic contaminants from water.

Soil and water pollution is of significant concern worldwide because of the consequences of environmental degradation and harmful effects on human health. Water bodies are very much polluted by various organic and inorganic pollutants by different human activities, including industrial wastes. Environmental pollution remains high because of urbanization-induced industrial developments and human lifestyle. It accumulates pollutants in the environment including plants and living organisms. Even mothers' milk is poisoned because of the uncontrolled, widespread increase in pollution. The discharge levels of organic hydrophobic contaminants in the water and soil are increasing rapidly. This severe pollution must be remediated to upgrade the environment and ensure the safety of human beings. It is vital to eradicate soil and water pollution to guarantee sufficient food and water. Different techniques available to remove the pollutants vary according to the type of pollutants. Hydrophobic contaminants are more dangerous than heavy metals and other pollutants; they cannot be easily removed, requiring special care. Hydrophobic organoxenobiotics released in the environment pose severe contamination in soil and water. Therefore, developing efficient and cost-effective processes is necessary to remove hydrophobic contaminants from soil and water. With nanoparticle-mediated remediation techniques, the green-synthesized nanoparticles exhibit improved performance. This review consolidates reports on the remediation techniques of hydrophobic contaminants, focusing on green-synthesized remediation agents. The very limited works on green synthesis of polymeric nanoparticles, particularly polyurethane-based materials for organic contaminants removal demand more attention in this area. PRACTITIONER POINTS: Consolidated the effects of hydrophobic organic and plastic contaminants on environment degradation. Summarized the advantages of green synthesized polymer nanoparticles for efficient removal of hydrophobic contaminants. Discussed the different sources of pollution and remediation techniques referring 112 research works.

Organic contaminants in the groundwater of the Kerio Valley water basin, Baringo County, Kenya

Currently, groundwater is largely becoming the main source of fresh water in most developing countries. However, various deleterious impacts resulting from anthropogenic activities beneath the earth’s surface have significantly affected groundwater quality, as evidenced in several areas endowed with mineral and hydrocarbon deposits, agricultural activities, and industrial processes. The possible etiological impacts may include cancer and genetic aberrations which result from the toxic effects of organic waterborne contaminants ingested by humans and animals over time. The motivation behind this study was to identify and determine the concentration profiles of various organic pollutants in the wells located along the Kerio Valley water basin near the exploratory wells for hydrocarbons and mining activities. Therefore, this study is necessary in unraveling the level of organic contaminants in the sampled borehole water, which can then be extrapolated to cover other boreholes within the Kerio Valley basin. The study was carried out during the dry season of December 2022. The water samples from the boreholes were extracted using a solid phase extraction procedure and characterized using a gas chromatograph interfaced with a mass selective detector. The findings indicate that benzene derivatives which were mainly xylenes, 1,3,5-trimethylbenzene, 1-ethyl-3-methylbenzene, 1-methyl-2-propylpentylbenzene and polycyclic aromatic hydrocarbons such as naphthalene, phenanthrene, fluoranthene, azulene, and pyrene were found in most of the boreholes sampled. Furthermore, long-chain hydrocarbons were present in all groundwater samples with varying concentrations. The concentration of benzene derivatives ranged from 2.84 to 20.47 ppm. However, polycyclic hydrocarbons exhibited the highest concentrations of all organic pollutants, with pyrene giving a concentration of 23.14 ppm, fluoranthene (18.54 ppm), phenanthrene (14.13 ppm) and anthracene (11.06 ppm). According to the findings reported in this study, most of the borehole water in the Kerio Valley basin is contaminated and may be unsafe for drinking. Most of the reported concentration levels were several times higher than the standards of the U.S. Environmental and Protection Agency. However, it is necessary to develop a policy framework on the assessment and monitoring of water quality in the region and propose urgent measures to ensure a clean water supply for the benefit of residents.

Comparative Assessment of Treatment of Mushroom Farm Wastewater Using Plant (Ceratophyllum demersum L.) and Algae (Chlorella vulgaris): Experimental and Kinetic Studies

Mushroom cultivation produces a significant amount of wastewater containing high levels of both organic and inorganic contaminants. In this study, mushroom farm wastewater (MFW) was treated separately by aquatic macrophytes (Ceratophyllum demersum L.) and algae (Chlorella vulgaris). The laboratory experiments consisted of a constructed reactor planted with selected aquatic plants and a microalgal culture and operated for 16 days. The pollutant removal efficiency was evaluated using different experimental combinations such as control 1 (C. demersum using borewell water), control 2 (C. vulgaris using borewell water), T1 (C. demersum using MFW), and T2 (C. vulgaris using MFW), respectively. The results showed that the T1 treatment had the highest significant (p < 0.05) removal efficiency of selected pollutant parameters (total dissolved solids: 86.00%; biochemical oxygen demand: 83.10%; chemical oxygen demand: 86.60%; total nitrogen: 84.30%; total phosphorus: 75.60%). The kinetic studies using the first-order reaction model showed a good fit (R2 > 0.8317) and the maximum rate constant (k) of pollutant reduction in T1 treatment. In addition, the growth, biochemical, and proximate parameters of both C. demersum and C. vulgaris were highest in the same treatment. Therefore, the proposed experiment offers a promising approach for the efficient and environmentally friendly treatment of MFW.

Geochemical and Geospatial Distribution of Organic Contaminants in the Flood Plain of Ekpetiama, Niger Delta Region of Nigeria

This study investigated the geochemical and geospatial distribution of organic contaminants in the floodplain water and sediments of Ekpetiama in the Niger Delta Region of Nigeria. This study is necessary because there are limited data on the level of organic contamination in this section of the Niger Delta Region of Nigeria. The extinction of planktons in Ekpetiama became a source of concern to the residents. This concern is because this section of the coastal plain provides fisher folks with livelihood. So, there was a need to track the source of contamination in this part of the Niger Delta region. Previous studies have suggested a high level of Total Petroleum Hydrocarbon and Total Hydrocarbon Content as possible sources of reduced dissolved oxygen in similar deltaic terrain. A total of 10 water and 10 sediment samples were collected and analyzed in triplicate at an interval of 100 m in the flood plain. A particle size analyzer was used to perform particle size analyses of air-dried sediments. The American Public Health Association method (APHA) was used to do the chemical analysis of the water samples. Here, a liquid-liquid extraction procedure was performed on sediment samples using 30 mL of Dichloromethane (DCM) as the extracting agent. The results were subjected to statistical validation. The mean grain size ranged from 2.37-4.83, kurtosis (1.94-0.49), and skewness (-0.8-0.71). The contaminant indicators (pH, biochemical oxygen demand, chemical oxygen demand, dissolved oxygen and Total Organic Carbon) point to the presence of organic contamination of the flood plain. The results indicated a total petroleum hydrocarbon range of 0.47-0.87 ppm in water and 0.69-0.96 ppm in sediments and a total hydrocarbon content range of 1.10-2.80 ppm in water and 2.56-3.90 ppm in sediment# samples. The results were above the permitted limits of the World Health Organisation. The source of ecological damage is the abnormal concentrations of organic contaminants in the flood plain. These results significantly caused ecosystem damage and human health effects in the food chain. This study provides information to the National Oil Spill Detection and Response Agency for a cleanup process.

Geochemical and Geospatial Distribution of Organic Contaminants in the Flood Plain of Ekpetiama, Niger Delta Region of Nigeria

This study investigated the geochemical and geospatial distribution of organic contaminants in the floodplain water and sediments of Ekpetiama in the Niger Delta Region of Nigeria. This study is necessary because there are limited data on the level of organic contamination in this section of the Niger Delta Region of Nigeria. The extinction of planktons in Ekpetiama became a source of concern to the residents. This concern is because this section of the coastal plain provides fisher folks with livelihood. So, there was a need to track the source of contamination in this part of the Niger Delta region. Previous studies have suggested a high level of Total Petroleum Hydrocarbon and Total Hydrocarbon Content as possible sources of reduced dissolved oxygen in similar deltaic terrain. A total of 10 water and 10 sediment samples were collected and analyzed in triplicate at an interval of 100 m in the flood plain. A particle size analyzer was used to perform particle size analyses of air-dried sediments. The American Public Health Association method (APHA) was used to do the chemical analysis of the water samples. Here, a liquid-liquid extraction procedure was performed on sediment samples using 30 mL of Dichloromethane (DCM) as the extracting agent. The results were subjected to statistical validation. The mean grain size ranged from 2.37-4.83, kurtosis (1.94-0.49), and skewness (-0.8-0.71). The contaminant indicators (pH, biochemical oxygen demand, chemical oxygen demand, dissolved oxygen and Total Organic Carbon) point to the presence of organic contamination of the flood plain. The results indicated a total petroleum hydrocarbon range of 0.47-0.87 ppm in water and 0.69-0.96 ppm in sediments and a total hydrocarbon content range of 1.10-2.80 ppm in water and 2.56-3.90 ppm in sediment# samples. The results were above the permitted limits of the World Health Organisation. The source of ecological damage is the abnormal concentrations of organic contaminants in the flood plain. These results significantly caused ecosystem damage and human health effects in the food chain. This study provides information to the National Oil Spill Detection and Response Agency for a cleanup process.

Industrial pilot scale slow pyrolysis reduces the content of organic contaminants in sewage sludge

Pyrolysis has been gaining global interest as a viable option for reducing organic contaminant levels in waste materials such as sewage sludge (SS) for their subsequent use as a soil amendment. However, publicly available knowledge on the capacity of pyrolysis to reduce the levels in SSs is mostly based on laboratory or bench scale studies. The aim of this study was to examine the effects of industrial pilot scale slow pyrolysis at two temperatures and retention times (450 °C, 1 h and 500 °C, 1.5 h) on a wide range of organic and inorganic contaminants in SSs. Pyrolysis at 500 °C decreased the concentrations of the detected per- and polyfluoroalkyl substances (PFASs, by 30–93 %), brominated diphenyl ethers (BDEs; by 97–98 %) and most endocrine disrupting compounds (EDCs, by 82–96 %) more efficiently than pyrolysis at 450 °C. Estrone and pharmaceuticals, with the exception of paracetamol, were removed to below quantification limits. Non-volatile inorganic contaminants concentrated to the chars (22–46 % increase). These results confirm that slow pyrolysis has the capacity to significantly reduce organic contaminant levels in SSs at an industrial scale, while content of inorganic contaminants depends mainly on the feedstock properties. Pyrolysis temperature of over 500 °C is advised to secure efficient removal of organic contaminants. However, it is anticipated that reactor design with good heat transfer and volatile removal could further improve the removal of organic contaminants from SSs. The results are especially valuable for sludge management operators planning to procure a pyrolysis plant.

High levels of tire wear particles in soils along low traffic roads

Traffic pollution has been linked to high levels of metals and organic contaminants in road-side soils, largely due to abrasion of tires, brake pads and the road surface. Although several studies have demonstrated correlations between different pollutants and various traffic variables, they mainly focused on roads with medium to high traffic density (>30,000 vehicles per day). In this study we have focused on investigating tire wear particles and road-related metals (zinc, copper, lead, chromium, nickel, and the metalloid arsenic) in the soils of low traffic roads in rural areas (650–14,250 vehicles per day). Different explanatory factors were investigated, such as traffic density, speed, % heavy vehicles, organic matter content, annual precipitation, soil types and roadside slope profiles. The results show high levels of tire wear particles, from 2000 to 26,400 mg/kg (0.2–2.6 % tire wear in d.w. soil), which is up to five times higher compared to previously reported values in roadside soils of high traffic density areas. A weak but significant correlation was found between tire wear particles, traffic speed and the annual precipitation. No significant relationship was found between tire wear particles metals. The concentrations of metals were comparable to previous studies of high traffic areas of Norway, as well as both urban and rural soils in other countries. For the metals, all factors together explained 45 % of the variation observed, with traffic density (11 %) and organic matter content (10 %) as the most important single variables. The analysis of tire wear particles in soils using Pyrolysis Gas chromatography Mass Spectrometry is challenging, and the results presented demonstrate the need for pretreatment to remove organic matter from the samples before analysis.