Abstract

The reverse osmosis (RO) technique has been extensively employed in the advanced treatment of industrial water and wastewater. However, this process results in the production of a significant quantity of reverse osmosis concentrate (ROC), which contains high levels of salinity and organic contaminants, thereby posing serious environmental problems. This study reported a two-stage precipitation process utilizing quicklime (CaO) and caustic soda (NaOH) in conjunction with air blowing (carbonation) for the removal of Ca2+ and Mg2+ from real brackish water ROC of factory. In stage I, the CaO precipitation-carbonation process was employed to eliminate the majority of Ca2+ from the ROC, while leaving Mg2+ virtually unaffected, yielding high-purity CaCO3 precipitates. In stage II, the NaOH precipitation method was utilized to eliminate the remaining Ca2+ and Mg2+ from the ROC. It was demonstrated that under optimal conditions, the removal rates of Ca2+ and Mg2+ exceeded 97%. Finally, the characterization of precipitates demonstrated the generation of high-purity CaCO3 precipitates in stage I, as well as the formation of CaCO3 and Mg(OH)2 precipitates in stage II. The results confirmed the feasibility of employing the two-stage precipitation with carbonation process to economically treat ROC and enable its reuse, offering valuable insights for the treatment of industrial wastewater.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call