Leu Residues Research Articles

Peptide identification and angiotensin converting enzyme (ACE) inhibitory activity in prolyl endoproteinase digests of bovine αs-casein

Incubation of sodium caseinate (NaCN) and purified α-casein (αs-CN) with an Aspergillus niger derived prolyl endoproteinase (An-PEP) for 1, 2, 3, 4, 8 and 24h resulted in the generation of potent angiotensin converting enzyme (ACE) inhibitory hydrolysates. An ACE IC50 of 21.1±5.1μg/ml was obtained on incubation of An-PEP with NaCN for 4h. Fractionation of the NaCN hydrolysates using 3kDa centrifugal filters resulted in highly active permeate fractions, the most potent being obtained from the 3h hydrolysate (ACE IC50=2.9±0.3μg/ml). The hydrolytic specificity of An-PEP for purified α-CN was assessed using UPLC ESI MS/MS. The analysis confirmed An-PEP’s cleavage preference for the C-terminal side of Pro and also confirmed that An-PEP has the ability to cleave at the C-terminal of Ala, Leu, Arg and His residues.

Apoprotein Structure and Metal Binding Characterization of a de Novo Designed Peptide, α3DIV, that Sequesters Toxic Heavy Metals.

De novo protein design is a biologically relevant approach that provides a novel process in elucidating protein folding and modeling the metal centers of metalloproteins in a completely unrelated or simplified fold. An integral step in de novo protein design is the establishment of a well-folded scaffold with one conformation, which is a fundamental characteristic of many native proteins. Here, we report the NMR solution structure of apo α3DIV at pH 7.0, a de novo designed three-helix bundle peptide containing a triscysteine motif (Cys18, Cys28, and Cys67) that binds toxic heavy metals. The structure comprises 1067 NOE restraints derived from multinuclear multidimensional NOESY, as well as 138 dihedral angles (ψ, φ, and χ1). The backbone and heavy atoms of the 20 lowest energy structures have a root mean square deviation from the mean structure of 0.79 (0.16) Å and 1.31 (0.15) Å, respectively. When compared to the parent structure α3D, the substitution of Leu residues to Cys enhanced the α-helical content of α3DIV while maintaining the same overall topology and fold. In addition, solution studies on the metalated species illustrated metal-induced stability. An increase in the melting temperatures was observed for Hg(II), Pb(II), or Cd(II) bound α3DIV by 18-24 °C compared to its apo counterpart. Further, the extended X-ray absorption fine structure analysis on Hg(II)-α3DIV produced an average Hg(II)-S bond length at 2.36 Å, indicating a trigonal T-shaped coordination environment. Overall, the structure of apo α3DIV reveals an asymmetric distorted triscysteine metal binding site, which offers a model for native metalloregulatory proteins with thiol-rich ligands that function in regulating toxic heavy metals, such as ArsR, CadC, MerR, and PbrR.

PH responsiveness of fibrous assemblies of repeat-sequence amphipathic α-helix polypeptides.

We reported previously that our designed polypeptide α3 (21 residues), which has three repeats of a seven-amino-acid sequence (LETLAKA)3, forms not only an amphipathic α-helix structure but also long fibrous assemblies in aqueous solution. To address the relationship between the electrical states of the polypeptide and its α-helix and fibrous assembly formation, we characterized mutated polypeptides in which charged amino acid residues of α3 were replaced with Ser. We prepared the following polypeptides: 2Sα3 (LSTLAKA)3, in which all Glu residues were replaced with Ser residues; 6Sα3 (LETLASA)3, in which all Lys residues were replaced with Ser; and 2S6Sα3 (LSTLASA)3; in which all Glu and Lys residues were replaced with Ser. In 0.1M KCl, 2Sα3 formed an α-helix under basic conditions and 6Sα3 formed an α-helix under acid conditions. In 1M KCl, they both formed α-helices under a wide pH range. In addition, 2Sα3 and 6Sα3 formed fibrous assemblies under the same buffer conditions in which they formed α-helices. α-Helix and fibrous assembly formation by these polypeptides was reversible in a pH-dependent manner. In contrast, 2S6Sα3 formed an α-helix under basic conditions in 1M KCl. Taken together, these findings reveal that the charge states of the charged amino acid residues and the charge state of the Leu residue located at the terminus play an important role in α-helix formation.

Hydrophobic Blocks Facilitate Lipid Compatibility and Translocon Recognition of Transmembrane Protein Sequences

Biophysical hydrophobicity scales suggest that partitioning of a protein segment from an aqueous phase into a membrane is governed by its perceived segmental hydrophobicity but do not establish specifically (i) how the segment is identified in vivo for translocon-mediated insertion or (ii) whether the destination lipid bilayer is biochemically receptive to the inserted sequence. To examine the congruence between these dual requirements, we designed and synthesized a library of Lys-tagged peptides of a core length sufficient to span a bilayer but with varying patterns of sequence, each composed of nine Leu residues, nine Ser residues, and one (central) Trp residue. We found that peptides containing contiguous Leu residues (Leu-block peptides, e.g., LLLLLLLLLWSSSSSSSSS), in comparison to those containing discontinuous stretches of Leu residues (non-Leu-block peptides, e.g., SLSLLSLSSWSLLSLSLLS), displayed greater helicity (circular dichroism spectroscopy), traveled slower during sodium dodecyl sulfate–polyacrylamide gel electrophoresis, had longer reverse phase high-performance liquid chromatography retention times on a C-18 column, and were helical when reconstituted into 1-palmitoyl-2-oleoylglycero-3-phosphocholine liposomes, each observation indicating superior lipid compatibility when a Leu-block is present. These parameters were largely paralleled in a biological membrane insertion assay using microsomal membranes from dog pancreas endoplasmic reticulum, where we found only the Leu-block sequences successfully inserted; intriguingly, an amphipathic peptide (SLLSSLLSSWLLSSLLSSL; Leu face, Ser face) with biophysical properties similar to those of Leu-block peptides failed to insert. Our overall results identify local sequence lipid compatibility rather than average hydrophobicity as a principal determinant of transmembrane segment potential, while demonstrating that further subtleties of hydrophobic and helical patterning, such as circumferential hydrophobicity in Leu-block segments, promote translocon-mediated insertion.

Effect of urea on growth and microcystins production of Microcystis aeruginosa

The effects of urea on the growth and toxin content of Microcystis aeruginosa isolated from Dianchi Lake in China were investigated. Experiments were carried out in lab using 15N isotopic technique to characterize urea-N biosynthesis to microcystins. High urea concentration (3.6mmol-NL−1) would restrict the growth of M.aeruginosa and the production of microcystin-LR, while low urea concentration (0.4–1.4mmol-NL−1) would promote the growth of M.aeruginosa and the production of microcystin-LR. The 15N labeling experiment further demonstrated that there existed selectivity when M.aeruginosa assimilated urea to form its structure. The majority of M.aeruginosa assimilated 1 urea molecule at first which was biosynthesized into the Ala or Leu residue. On day 18, The m/z=1004 parent ion assimilated 9 15N except that the Mdha residue did not assimilate any urea-15N. The results give deeper insight to the biosynthesis of urea into microcystins.

Ionization-Dependent Behavior of Transmembrane Helices that Incorporate Glu or Tyr Residues

GWALP23 (acetyl-GGALW5LALALALALALALW19LAGA-amide) is a constructive low-dynamic model peptide for investigations of single-residue influence on protein-lipid interactions and the properties of membrane-spanning helices (J. Biol. Chem. 285, 31723). To investigate the pH dependence, ionization behavior and orientational constraints when potentially negatively charged glutamic acid side chains are present, we have substituted a single Leu residue with Glu at different positions and incorporated specific 2H-Ala labels in the core GWALP23 or Y5GWALP23. Solid state NMR experiments show well defined 2H-Ala quadrupolar splittings for Y5GWALP23-E14 over the pH range of 6 to 10, suggesting that the peptide helix is well oriented in DLPC and DOPC lipid bilayers. Spectral changes are evident above pH 11 (in ether-lipid bilayers), but the titration of the Glu is uncertain because the Tyr residue itself appears to titrate around pH 11.5. GWALP23-E14 shows no spectral changes over the pH range 6.0 to 11.5, yet a change in quadrupolar splittings is observed at pH 13. The combined results suggest that the Glu residue may titrate with a pKa near 12. In bilayers of DLPC and DOPC, GWALP23-E16 shows similar trend and is suggested to have a pKa of around 12. The rather modest shifts in the 2H quadrupolar splittings, nevertheless, suggest that the orientation of the transmembrane helix actually may change rather little at high pH. It is conceivable that the close proximity of either E14 or E16 to W19 could provide stability to the neutral peptide helix and perhaps influence the results. We additionally are investigating the possibilities for helix unwinding near the ends of these peptides.

The characteristic structure of anti-HIV actinohivin in complex with three HMTG D1 chains of HIV-gp120.

The anti-HIV lectin actinohivin (AH) specifically interacts with HMTG (high-mannose-type glycan), which is attached to the glycoprotein gp120 of HIV-1 in a process in which the three branched mannotriose chains (D1, D2, and D3) of HMTG exhibit different binding affinities, it being estimated that that of D1 is the strongest, that of D3 is weaker, and that of D2 is undetectable. These properties have been ascribed to the stereochemical differences in linkages between the second and the third mannose residues of the three chains. In order to clarify the interaction geometry between AH and the major target D1, an X-ray determination of the crystal structure of AH in complex with D1-which is α(1,2)mannotriose composed of three mannose (Man) residues linked together only by α(1,2) bonding-has been performed. In each of the three D1-binding pockets of AH, two Man residues of D1 are accommodated at zones 1 and 2 in the pocket, in the same way as those found in the α(1,2)mannobiose-bound AH crystals. However, an OMIT map shows poor densities at both ends of the two residues. This suggests the existence of positional disorder of D1 in the pocket: the two zones are each occupied by two Man residues in two different modes, with mode A involving the Man1 and Man2 residues and mode B the Man2 and Man3 residues. In each mode, D1 is stabilized by adopting a double-bracket-shaped conformation through CH⋅⋅⋅O interactions. In mode B, however, the Man1 residue, which is the most sensitive residue to AH binding, protrudes wholly into the solvent region without contacts with AH. In mode A, in contrast, the Man3 residue interacts with the essential hydrophobic amino acid residues (Tyr and Leu conserved between the three pockets) of AH. Therefore, mode A is likely to be the one that occurs when whole HMTG is bound. In this mode, the two hydroxy groups (O3 and O4) of the Man2 residue are anchored in zone 2 by four hydrogen bonds with Asp, Asn, and Tyr residues of AH. In addition, it has been found that an isolated water molecule buried in the hydrophobic long loop bridges between Asp of AH and the hydroxy group of Man2 through hydrogen bonds. The most interesting feature is found in the interaction of the Man1 and Man3 residues with AH. All eight hydroxy groups of the two residues are completely exposed in the solvent region, whereas their hydrophobic parts make contacts with a Leu residue and two Tyr residues so that the shape of D1 and the surface of AH fit well over a wide area. These structural characteristics are potentially useful for development of AH to produce more effective antiretroviral drugs to suppress the infectious expansion of HIV/AIDS and to help expedite an end to the HIV/AIDS pandemic in the near future.

Exploring the Genomic Roadmap and Molecular Phylogenetics Associated with MODY Cascades Using Computational Biology.

Maturity onset diabetes of the young (MODY) is a metabolic and genetic disorder. It is different from type 1 and type 2 diabetes with low occurrence level (1-2%) among all diabetes. This disorder is a consequence of β-cell dysfunction. Till date, 11 subtypes of MODY have been identified, and all of them can cause gene mutations. However, very little is known about the gene mapping, molecular phylogenetics, and co-expression among MODY genes and networking between cascades. This study has used latest servers and software such as VarioWatch, ClustalW, MUSCLE, G Blocks, Phylogeny.fr, iTOL, WebLogo, STRING, and KEGG PATHWAY to perform comprehensive analyses of gene mapping, multiple sequences alignment, molecular phylogenetics, protein-protein network design, co-expression analysis of MODY genes, and pathway development. The MODY genes are located in chromosomes-2, 7, 8, 9, 11, 12, 13, 17, and 20. Highly aligned block shows Pro, Gly, Leu, Arg, and Pro residues are highly aligned in the positions of 296, 386, 437, 455, 456 and 598, respectively. Alignment scores inform us that HNF1A and HNF1B proteins have shown high sequence similarity among MODY proteins. Protein-protein network design shows that HNF1A, HNF1B, HNF4A, NEUROD1, PDX1, PAX4, INS, and GCK are strongly connected, and the co-expression analyses between MODY genes also show distinct association between HNF1A and HNF4A genes. This study has used latest tools of bioinformatics to develop a rapid method to assess the evolutionary relationship, the network development, and the associations among eleven MODY genes and cascades. The prediction of sequence conservation, molecular phylogenetics, protein-protein network and the association between the MODY cascades enhances opportunities to get more insights into the less-known MODY disease.

Identification and characterization of fusolisin, the Fusobacterium nucleatum autotransporter serine protease.

Fusobacterium nucleatum is an oral anaerobe associated with periodontal disease, adverse pregnancy outcomes and colorectal carcinoma. A serine endopeptidase of 61–65 kDa capable of damaging host tissue and of inactivating immune effectors was detected previously in F. nucleatum. Here we describe the identification of this serine protease, named fusolisin, in three oral F. nucleatum sub-species. Gel zymogram revealed fusobacterial proteolytic activity with molecular masses ranging from 55–101 kDa. All of the detected proteases were inhibited by the serine protease inhibitor PMSF. analysis revealed that all of the detected proteases are encoded by genes encoding an open reading frame (ORF) with a calculated mass of approximately 115 kDa. Bioinformatics analysis of the identified ORFs demonstrated that they consist of three domains characteristic of autotransporters of the type Va secretion system. Our results suggest that the F. nucleatum fusolisins are derived from a precursor of approximately 115 kDa. After crossing the cytoplasmic membrane and cleavage of the leader sequence, the C-terminal autotransporter domain of the remaining 96–113 kDa protein is embedded in the outer membrane and delivers the N-terminal S8 serine protease passenger domain to the outer cell surface. In most strains the N-terminal catalytic 55–65 kDa domain self cleaves and liberates itself from the autotransporter domain after its transfer across the outer cell membrane. In F. nucleatum ATCC 25586 this autocatalytic activity is less efficient resulting in a full length membrane-anchored serine protease. The mature serine protease was found to cleave after Thr, Gly, Ala and Leu residues at the P1 position. Growth of F. nucleatum in complex medium was inhibited when serine protease inhibitors were used. Additional experiments are needed to determine whether fusolisin might be used as a target for controlling fusobacterial infections.

Foldamers to nanotubes: influence of amino acid side chains in the hierarchical assembly of α,γ(4)-hybrid peptide helices.

Supramolecular assembly of various artificially folded 12-helical architectures composed of γ(4) -Val, γ(4) -Leu and γ(4) -Phe residues is investigated. In contrast to the 12-helices composed of γ(4) -Val and γ(4) -Leu residues, the helices with γ(4) -Phe residues displayed unique elongated nanotubular architectures. The elongated nanotube assembly was further explored as a template for biomineralization of silver ions to silver nanowires. A comparative study using an analogous α-peptide helix reveals the importance of the spatial arrangement of aromatic side chains along the helical cylinder in a 12-helix. These results suggested that the proteolytically and structurally stable α,γ(4) -hybrid peptide 12-helices may serve as a new generation of potential templates in the design of functional biomaterials.

Haloganan: A novel antimicrobial peptide for treatment of wound infections

HG1 is a Leu-rich antimicrobial peptide (AMP). Previously, the peptide was shown to lose its activity in human serum although it possessed potent and broad spectrum antimicrobial activity against a wide range of pathogenic microbes. In an attempt to design an HG1 isomer that can overcome the problem of HG1, a structure–activity relationship study was conducted by substitution of each of five Leu residues with a Gln residue. Each substitute was tested for its antimicrobial activity against methicillin-resistant Staphylococcus aureus (MRSA) or Candida strains. In addition, the antimicrobial activity of HG1 isomers was examined in the presence of glycosaminoglycans or lipid components occurring in the extracellular matrix, human serum and wound fluid. As a result, it was determined that the third residue (Leu) in the sequence of HG1 was mainly responsible for abrogation of its antimicrobial activity in human serum or wound fluid. An HG1 isomer (L3Q) with a Gln-3 substitution exhibited a potent antibacterial activity in 50% human serum. While the anti-MRSA activity of L3Q was equivalent to that of HG1, its anti-Candida activity was found to be substantially reduced. In order to improve anti-Candida activity of L3Q, its cationicity was enhanced by replacement of the C-terminal Ala-19 with a Lys residue. Overall, an HG1 isomer with two substitutions of Gln-3 and Lys-19, named haloganan, was verified to have an advantage over HG1 in that it exerted its potent antimicrobial activity under conditions containing human serum and/or wound fluid.

Structure, function and inhibition of ent-kaurene synthase from Bradyrhizobium japonicum.

We report the first X-ray crystal structure of ent-kaur-16-ene synthase from Bradyrhizobium japonicum, together with the results of a site-directed mutagenesis investigation into catalytic activity. The structure is very similar to that of the α domains of modern plant terpene cyclases, a result that is of interest since it has been proposed that many plant terpene cyclases may have arisen from bacterial diterpene cyclases. The ent-copalyl diphosphate substrate binds to a hydrophobic pocket near a cluster of Asp and Arg residues that are essential for catalysis, with the carbocations formed on ionization being protected by Leu, Tyr and Phe residues. A bisphosphonate inhibitor binds to the same site. In the kaurene synthase from the moss Physcomitrella patens, 16-α-hydroxy-ent-kaurane as well as kaurene are produced since Leu and Tyr in the P. patens kaurene synthase active site are replaced by smaller residues enabling carbocation quenching by water. Overall, the results represent the first structure determination of a bacterial diterpene cyclase, providing insights into catalytic activity, as well as structural comparisons with diverse terpene synthases and cyclases which clearly separate the terpene cyclases from other terpene synthases having highly α-helical structures.

Abundant Variation of Waxy Gene in Yunnan Rice Landraces and Molecular Characterization of a Novel Wxzm Allele

ABSTRACTWaxy is the key gene that controls the apparent amylose content (AC) in rice (Oryza sativa L.) endosperm. In this study three allele‐specific polymerase chain reaction (AS‐PCR) primer sets for Wxmq and Wxop/hp were developed that provided new markers for determining and selecting targeted Waxy alleles. The AC determination and AS‐PCR results indicated abundant AC variation and extremely rich Waxy allelic diversity in Yunnan rice landraces such that 70 Waxy alleles were detected in 404 landraces. For nonglutinous rice, association analysis showed that only two of the seven Waxy functional single nucleotide polymorphisms (SNPs) were significantly correlated to AC variance. The intron 1 splice site (In1) explained 3.45% and all seven sites explained 9.79% of the total AC variance, respectively, which were much less compared to previous studies. A novel Wxzm allele with a nonsynonymous C to T transition at E10ZM site located at 2134 bp of exon 10 was characterized from a glutinous landrace Zimi. This transition led to a Leu to Phe substitution at the glycosyl transferases domain of granule‐bound starch synthase I (GBSSI), which was highly conserved in Poaceae crops. Protein analysis showed that Zimi had similar endosperm GBSSI accumulation as other nonglutinous landraces but its activity was dramatically decreased, indicating that this Leu residue was critical for the glycosyl transfer activity of GBSSI. The characterization of Wxzm revealed a new mechanism for rice glutinous formation and suggested multiple origins of the rice glutinous phenotype.

Role of the N-terminal hydrophobic residues of DGKε in targeting the endoplasmic reticulum

The endoplasmic reticulum (ER), comprised of an interconnected membrane network, is a site of phospholipid and protein synthesis. The diacylglycerol kinase (DGK) enzyme family catalyzes phosphorylation of diacylglycerol to phosphatidic acid. Both of these lipids are known not only to serve as second messengers but also to represent intermediate precursors of lipids of various kinds. The DGK family is targeted to distinct subcellular sites in cDNA-transfected and native cells. Of DGKs, DGKε localizes primarily to the ER, suggesting that this isozyme plays a role in this organelle. Using experiments with various deletion and substitution mutants, this study examined the molecular mechanism of how DGKε is targeted to the ER. Results demonstrate that the N-terminal hydrophobic sequence 20–40 plays a necessary role in targeting of DGKε to the ER. This hydrophobic amino acid segment is predicted to adopt an α-helix structure, in which Leu22, L25, and L29 are present in mutual proximity, forming a hydrophobic patch. When these hydrophobic Leu residues were replaced with hydrophilic amino acid Gln, the mutant fragment designated DGKε (20–40/L22Q,L25Q,L29Q) exhibits diffuse distribution in the cytoplasm. Moreover, full-length DGKε containing these substitutions, DGKε (L22Q,L25Q,L29Q), is shown to distribute diffusely in the cytoplasm. These results indicate that the N-terminal hydrophobic residues play a key role in DGKε targeting to the ER membrane. Functionally, knockdown or deletion of DGKε affects the unfolding protein response pathways, thereby rendering the cells susceptible to apoptosis, to some degree, under ER stress conditions.

Fragmentation Characteristics and Utility of Immonium Ions for Peptide Identification by MALDI-TOF/TOF-Mass Spectrometry

Abstract One of significant characteristics of matrix-assisted laser desorption/ionization tandem time-of-light mass spectrometry (MALDI-TOF/TOF-MS) high-energy collision induced dissociation (CID) is to produce abundant immonium (IM) ions that can offer a wealth of information for peptide composition. However, MALDI-TOF/TOF is generally used for routine protein identification based on database search or de novo sequencing combined with chemical derivation. Consequently, the characteristics of IM ions may not be fully explored and utilized. Here, a total of 239 MS/MS spectra were used to explore the fragmentation features of IM ions with MALDI TOF/TOF spectrometry and their application for peptide identification. IM ion signals for 14 kinds of amino acids including His with a positive rate of more than 50% were observed. The results indicated that the chemical nature of the amino acids and position effect were two main factors that affect the intensity of fragment ions. In addition, false positive IM ions were mainly derived from Arg, Lys, Leu and Ile residues or mixture peptides. Besides the compositional information, partial sequence information was also obtained by comparison of the relative intensity of IM ions. These findings are helpful when performing manual interpretations and can help improving current peptide search algorithms.

A quantitative tool to distinguish isobaric leucine and isoleucine residues for mass spectrometry-based de novo monoclonal antibody sequencing.

De novo sequencing by mass spectrometry (MS) allows for the determination of the complete amino acid (AA) sequence of a given protein based on the mass difference of detected ions from MS/MS fragmentation spectra. The technique relies on obtaining specific masses that can be attributed to characteristic theoretical masses of AAs. A major limitation of de novo sequencing by MS is the inability to distinguish between the isobaric residues leucine (Leu) and isoleucine (Ile). Incorrect identification of Ile as Leu or vice versa often results in loss of activity in recombinant antibodies. This functional ambiguity is commonly resolved with costly and time-consuming AA mutation and peptide sequencing experiments. Here, we describe a set of orthogonal biochemical protocols, which experimentally determine the identity of Ile or Leu residues in monoclonal antibodies (mAb) based on the selectivity that leucine aminopeptidase shows for n-terminal Leu residues and the cleavage preference for Leu by chymotrypsin. The resulting observations are combined with germline frequencies and incorporated into a logistic regression model, called Predictor for Xle Sites (PXleS) to provide a statistical likelihood for the identity of Leu at an ambiguous site. We demonstrate that PXleS can generate a probability for an Xle site in mAbs with 96% accuracy. The implementation of PXleS precludes the expression of several possible sequences and, therefore, reduces the overall time and resources required to go from spectra generation to a biologically active sequence for a mAb when an Ile or Leu residue is in question.

Sorting of LPXTG Peptides by Archetypal Sortase A: Role of Invariant Substrate Residues in Modulating the Enzyme Dynamics and Conformational Signature of a Productive Substrate

Transpeptidase sortase catalyzes the covalent anchoring of surface proteins to the cell wall in Gram-positive bacteria. Sortase A (SrtA) of Staphylococcus aureus is a prototype enzyme and considered a bona fide drug target because several substrate proteins are virulence-related and implicated in pathogenesis. Besides, SrtA also works as a versatile tool in protein engineering. Surface proteins destined for cell wall anchoring contain a LPXTG sequence located in their C-terminus which serves as a substrate recognition motif for SrtA. Recent studies have implicated substrate-induced conformational dynamics in SrtA. In the present work, we have explored the roles of invariant Leu and Pro residues of the substrate in modulating the enzyme dynamics with a view to understand the selection process of a catalytically competent substrate. Overall results of molecular dynamics simulations and experiments carried out with noncanonical substrates and site-directed mutagenesis reveal that the kinked conformation due to Pro in LPXTG is obligatory for productive binding but does not per se control the enzyme dynamics. The Leu residue of the substrate appears to play the crucial role of an anchor to the beta6-beta7 loop directing the conformational transition of the enzyme from an "open" to a "closed" state subsequent to which the Pro residue facilitates the consummation of binding through predominant engagement of the loop and catalytic motif residues in hydrophobic interactions. Collectively, our study provides insights about specificity, tolerance, and conformational sorting of substrate by SrtA. These results have important implications in designing newer substrates and inhibitors for this multifaceted enzyme.

Structure–Critical Distribution of Aromatic Residues in the Fibronectin Type III Protein Family

Over a thousand individual Fibronectin type III (FnIII) domain sequences, extracted from more than 60 different FnIII-dependent protein super-structures, were downloaded from curated database resources. Three regions of extreme sequence conservation within the well-characterized FnIII β-sandwich structure were respectively defined by near absolute conservation of a tryptophan (Trp) in β-strand-B, tyrosines (Tyr) in both β-strand-C and β-strand-F, and a leucine (Leu) residue in the unstructured region immediately preceding β-strand-F. Employing these four conserved landmarks, the entire FnIII sequence dataset was vertically registered to align the three conserved regions, and the cumulative distribution of all other amino acid functionality was determined and plotted relative to these landmark residues. Conserved aromatic sites were each found to be flanked by aliphatic residues that assure localization of these sites to the inaccessible hydrophobic interface between major sheet structures. Mapping the location of conserved aromatic sites in numerous PDB structures demonstrated the consistent pair-wise co-localization of the indole side-chain of the conserved strand-B Trp site to within 0.35 nm of the phenolic side-chain of the strand-C Tyr site located 8-14 amino acids distal. Likewise, the side-chain of the strand-F Tyr site co-localized to within 0.45 nm of the aliphatic side-chain of the conserved Leu that uniformly precedes it by six residues. While classic hydropathy-based theories would deem the "burying" of Tyr and Trp side-chains and/or their association with hydrophobic FnIII core residues thermodynamically unnecessary, alternative contributions of conserved Trp and Tyr residues, and particularly the role of the absolutely conserved tyrosine phenolic -OH in native FnIII structure-function are considered. A more global role for conserved FnIII aromaticity is also discussed in light of the aromatic conservation observed in other well-established protein families.

Antimicrobial properties and interaction of two Trp-substituted cationic antimicrobial peptides with a lipid bilayer

Tryptophan (Trp) residues reportedly exhibit a strong membrane-disruptive activity, and this property endows Trp-containing antimicrobial peptides (AMPs) with a unique ability to interact with the surface of bacterial cell membranes, possibly improving antimicrobial properties. In this study, we investigated the influence of Trp residues engineered to have a distinct preference for the interface region of lipid bilayers on antimicrobial activity. We designed two Trp-substituted AMPs (I1WL5W and I4WL5W) by replacing Ile or Leu residues with two Trp residues at different positions in the L-K6 peptide, and determined their antimicrobial activity and mechanism of membrane action. Both I1WL5W and I4WL5W exhibited significantly higher antimicrobial activity and lower cytotoxicity against Gram-negative and Gram-positive bacteria compared with L-K6. The Trp-substituted peptides had a disordered structure in aqueous solution and adopted an α-helical structure in solutions of 50% trifluoroethanol/water and 30 mM SDS. I1WL5W and I4WL5W caused a significant leakage of calcein from liposomes containing membranes that mimicked those of Escherichia coli and Staphylococcus aureus. Scanning electron microscopy analysis suggested that I1WL5W and I4WL5W killed bacteria by disrupting bacterial cell membranes. Furthermore, fluorescence and quenching data from a variety of liposomes, which mimic different cell membranes, indicated that the Trp-substituted peptides could insert into the lipid bilayers and induce blue shifts in the emission spectra of the Trp residues. I1WL5W and I4WL5W were also less susceptible to acrylamide or KI quenchers. The current work may be important for designing novel Trp-containing peptides exhibiting strong antimicrobial abilities by penetrating bacterial membranes.

Transmission of Stability Information through the N-domain of Tropomyosin Is Interrupted by a Stabilizing Mutation (A109L) in the Hydrophobic Core of the Stability Control Region (Residues 97–118)

Tropomyosin (Tm) is an actin-binding, thin filament, two-stranded α-helical coiled-coil critical for muscle contraction and cytoskeletal function. We made the first identification of a stability control region (SCR), residues 97-118, in the Tm sequence that controls overall protein stability but is not required for folding. We also showed that the individual α-helical strands of the coiled-coil are stabilized by Leu-110, whereas the hydrophobic core is destabilized in the SCR by Ala residues at three consecutive d positions. Our hypothesis is that the stabilization of the individual α-helices provides an optimum stability and allows functionally beneficial dynamic motion between the α-helices that is critical for the transmission of stabilizing information along the coiled-coil from the SCR. We prepared three recombinant (rat) Tm(1-131) proteins, including the wild type sequence, a destabilizing mutation L110A, and a stabilizing mutation A109L. These proteins were evaluated by circular dichroism (CD) and differential scanning calorimetry. The single mutation L110A destabilizes the entire Tm(1-131) molecule, showing that the effect of this mutation is transmitted 165 Å along the coiled-coil in the N-terminal direction. The single mutation A109L prevents the SCR from transmitting stabilizing information and separates the coiled-coil into two domains, one that is ∼9 °C more stable than wild type and one that is ∼16 °C less stable. We know of no other example of the substitution of a stabilizing Leu residue in a coiled-coil hydrophobic core position d that causes this dramatic effect. We demonstrate the importance of the SCR in controlling and transmitting the stability signal along this rodlike molecule.