Lens Group Research Articles

Anticataract Activity of Ethanolic Extract of Garcinia Mangostana Linn Pericarp on Glucose-induced Cataractogenesis in Goat Lens

BACKGROUND: One of the main causes of blindness for diabetic patients is cataract. The molecular mechanisms that may be involved in diabetic cataract include polyol pathway flux, increased formation of advanced glycation end products, osmotic stress, and elevated oxidative stress.
 AIM: The aim of the study was to explore the anticataract activity of the ethanol extract from pericarp of Garcinia mangostana Linn (GML) in Goat eye lens.
 METHODS: Goat eye lenses separated to five groups were incubated in M199 medium, added by penicillin of 100 U/ml and streptomycin of 0.1 mg/ml in a 37°C incubator with 95% O2 and 5% CO2 for 120 h. Group I served as the normal control. Group II (toxic control) the lenses were added by 30 mM glucose. The lenses in Groups III, IV, and V nurtured in M199 medium with 30 mM of glucose added by 100, 500, and 1000 μg/ml of GML pericarp extract. Carboxymethyllysine (CML), GRP78, DDIT3, active caspase 3, and MDA levels were measured by enzyme-linked immunosorbent assay assays. Comparisons of biochemical parameters were conducted using one-way ANOVA with post hoc Tukey test.
 RESULTS: The administration of glucose 30 mM increased MDA, CML, DDIT3, and GRP78, and active caspase 3 levels in Group II. Groups III, IV, and V which treated with GML pericarp extract decreased MDA, CML, GRP78, and DDIT3, and active caspase 3 levels inside the lens. On lens capsule, the CML and GRP78 levels increased.
 CONCLUSION: Ethanol extract of GML pericarp potentially showed antioxidant, anti-glycation, DDIT3 inhibitor, and anti-apoptotic activity in Goat cultured lenses.

Close knit: using consumption communities to overcome loneliness

Purpose This paper aims to highlight the role of consumption communities as a self-help support group to ameliorate loneliness. The authors suggest that the self-help element of consumption communities has been overlooked because of a focus on communities pursuing hegemonic masculinity. Instead, the authors focus on a female-led and – dominated consumption community. Design/methodology/approach A longitudinal ethnography was undertaken with the aim of understanding consumer behaviour in a “hyper-feminine” environment. Participant observation, depth interviews and netnography were carried out over five years within the Knitting community, focussing on an Irish Stitch ‘n’ Bitch group. Findings A dimension of consumption communities has been overlooked in the extant literature; this female-led and -dominated community functions as a self-help support group used as a “treatment” for loneliness. It also demonstrates all the characteristics of a support group. Research limitations/implications This study offers a framework with which new studies of community consumption can be examined or existing studies can be re-examined, through rather than cases of loneliness and self-help support groups. Practical implications Marketers have an opportunity to build supportive consumption communities that provide a safe space for support where commerce and brand-building can also occur. Groups aimed at ameliorating loneliness may wish to consider integration of the consumption community model. Originality/value Calls have been made for a reconceptualisation of consumption communities as current typologies seem inadequate. This paper responds with a critical examination through the lens of the self-help support group, while also taking steps towards resolving the gender imbalance in the consumption community literature. The paper explores loneliness, a previously underexamined motivator for consumption community membership.

Laser confocal auto-collimation decentration measurement for spherical lens

A high-precision confocal auto-collimation decentration measurement method (CADM) for spherical lens is proposed. In comparison with the traditional auto-collimation method, this method employs confocal technology to accurately locate the center of the tested lens, which reduces the focusing error. The radius of curvature and center bias measurements are integrated into one measurement system, which eliminates the random errors introduced by multiple installations. This method also enables the measurement of every surface in the lens group. Theoretical analysis and experiments show that the measurement accuracy of this method reaches 0.335 arcsec. CADM effectively improves measurement efficiency and accuracy, providing a reliable and effective method for the decentration measurement of optical systems.

Lens dose and risk of radiation-induced early lens opacities among hospital staff. A cross-sectional study

The main health effect of exposure to ionizing radiation on the eyes is lens opacities and cataracts. Recent findings have raised questions about the pathogenesis of lenticular damage and the exact threshold dose for the onset of this effect. Occupational dose limits for the lens have been therefore recently reduced to 0.02 Gy/year averaged over 5 years with no single year exceeding 0.05 Gy/year. Healthcare workers can be exposed to ionizing radiation during interventional and other medical procedures. The aim of our study was to evaluate the annual dose to the lens in a large group of healthcare workers exposed to ionizing radiation who are working in a university hospital in Rome and to evaluate a dose-response relationship between lens exposure and the onset of lenticular opacities. We reviewed the exposure data of 702 subjects; the average annual dose to the crystalline lens was calculated using a physical algorithm. Moreover, the clinical records of 107 radiation exposed workers were reviewed: the presence of radiation-compatible opacities were assessed for all operators according to the Lens Opacities Classification System (LOCS) III and Merriam-Focht classification. Annual doses exceeding 0.02 Gy were found in 2.1% of the exposed population. Incipient lenticular opacities were observed in 18.6% of the study population. The presence of alterations was associated with higher lens dose (>0.0092 Gy). Based on our results, optimization of procedures and protection of the lens from ionizing radiation by means of personal protection equipment are strongly recommended in higher exposure scenarios.

Design of a panoramic annular lens with ultrawide angle and small blind area.

A panoramic annular lens (PAL) comprises a panoramic annular head unit (PAHU) and a relay lens group. Due to the properties of annular imaging, single-channel PAL systems contain a blind area in the central field of view (FOV), which is difficult to reduce in a traditional optical system structure. Therefore, we propose a novel reflective PAHU structure, using two mirrors to replace the traditional single-lens- or multilens-cemented PAHU, to achieve a smaller blind area and ultrawide-angle imaging. In this paper, we present the design of an ultrawide-angle PAL with a FOV of (22∘∼120∘)×360∘ using our proposed method. The resulting optical system achieves a blind area ratio of less than 3.67%. Compared with the traditional PAL system with the lowest blind area ratio, the blind area ratio of our system is reduced by half, demonstrating the feasibility of the proposed method.

Extended Depth-of-Field of a Miniature Optical Endoscope Using Wavefront Coding

Endoscopic imaging is an indispensable tool for visual inspection of surfaces in hard-to-access places. The conventional optical endoscope only enables imaging the regions that lie close to the focal plane, and therefore improving the depth of field (DOF) of an endoscopic system has recently attracted much attention. Here, we propose and demonstrate a simple, cost-effective, and easily available industrial endoscopic system, which is composed of a rigid tube and group of optical lenses. The outer diameter of the designed endoscopic modality presented in this article is 3 mm. By employing the wavefront coding technique, the DOF of newly-designed endoscope was extended to 2.7 mm in the proof-of-concept experiment, which is an increase of almost 10 times compared to the initial counterpart.

Enhanced high-quality super-resolution imaging in air using microsphere lens groups.

Most microsphere-assisted super-resolution imaging experiments require a high-refractive-index microsphere to be immersed in a liquid to improve the super-resolution. However, samples are inevitably polluted by residuals in the liquid. This Letter presents a novel (to the best of our knowledge) method employing a microsphere lens group (MLG) that can easily achieve high-quality super-resolution imaging in air. The performance of this method is at par or better than that of the high-refractive-index microspheres immersed in liquid. In addition, the MLG generates a real image that is closely related to the photonic nanojet position of the microsphere super-lens. This imaging method is beneficial in microsphere imaging applications where liquids are impractical.

Silver Nanoparticles as a Novel Potential Preventive Agent against Acanthamoeba Keratitis

Free living, cosmopolitan amoebae from Acanthamoeba genus present a serious risk to human health. As facultative human parasites, these amoebae may cause Acanthamoeba keratitis (AK). Acanthamoeba keratitis is a severe, vision-threatening corneal infection with non-specific symptoms. The number of reported AK cases worldwide has been increasing every year. Moreover, 90% of Acanthamoeba keratitis cases are related to contact lens use. Wearing and storage contact lenses not in accordance with the physicians and manufacturers recommendations are the primary key risk factors of this disease. Amoebae can easily adhere to the contact lens surface and transmit to the corneal epithelium. Preventing amoebae adhesion to the contact lens surface could significantly decrease the number of AK infections. Until now, the effective therapy against AK is still under development. Currently proposed therapies are mainly limited to the chlorhexidine digluconate combined with propamidine isethionate or hexamidine applications, which are insufficient and very toxic to the eye. Due to lack of effective treatment, looking for new potential preventive agents is crucial to decrease the number of Acanthamoeba keratitis infections, especially among contact lens users. Nanoparticles have been already included in several novel therapies against bacteria, viruses, fungi, and protist. However, their anti-amoebic potential has not been fully tested yet. The aim of this study was to assess silver nanoparticles (AgNPs) and platinum nanoparticles (PtNPs) anti-amoebic activity and influence on the amoebae adhesion to the surface of four different groups of contact lenses—classified according to the Food and Drugs Administration (FDA) guidelines. The obtained results show that both tested nanoparticles were effective against Acanthamoeba trophozoites and decreased the amoebae adhesion to the contact lens surface. AgNPs showed better anti-amoebic activity to cytotoxicity dependence and reduced amoebae adhesion in a wider spectrum of the tested contact lenses. Our studies also confirmed that ionization next to hydration of the contact lens material is a crucial parameter influencing the Acanthamoeba adhesion to the contact lens surface. In conclusion, silver nanoparticles might be considered as a novel preventive agent against Acanthamoeba keratitis infection.

(Invited) 20 Years of Carbon Nanotube Evolution

From the advent of individualized carbon nanotubes nearly 20 years ago to the current ability to control their properties at multiple levels, the world of CNTs has changed tremendously. Through the lens of my group’s efforts, I will provide a retrospective on how our understanding of CNTs has changed through this period. An overview will be given of our efforts on Raman and photoluminescence (PL) spectroscopy to identify and characterize fundamental CNT properties. While spectroscopic separation enabled many revelations on CNT photophysics, the limitations imposed by mixed-chirality samples ultimately were overcome with the advent of effective and efficient methods for chirality enrichment. Examples will be given of advances in photophysics established through Raman performed on pure chirality samples. New separations techniques presented new questions on nanotube surface chemistry, ultimately leading to studies of surface chemistry, surface structure, and defects, at the ensemble and single tube levels. Most recently, development of functionalization methods to introduce optically active defect states has opened an exciting new direction in nanotube studies. An overview of the new photophyics and quantum light emission enabled by defects will be given, along with some perspective on future outlook.

Integrating optical design with Taguchi method in a remote wireless light charging system

Power cannot be efficiently transmitted over long distances using conventional wireless transmission. Although increasing charger power effectively improves charging efficiency, safety concerns include mobile phone heating, long-term health damage caused by electromagnetic waves, and interferences on other precise instruments. This study proposed a remote wireless charging system that utilizes mechanical movement design in zoom lenses to maintain wireless charging system performance and perform charging operations from different positions in a room through the movement between lens groups. Moreover, the Taguchi method was applied in optical design software to identify the optimal factors for performance improvement. The wireless light charging system was optimized using the Taguchi method. In addition, optimization of curvature, thickness, and material were proposed. Three focal lengths were optimized through 18 sets of experimental data to reduce the spherical and comatic aberrations; and modulation transfer function value was improved to enhance the performance of the remote wireless light charging system. The remote wireless light charging system was designed to be used in an indoor space. In general, the system is installed on the ceiling, and mechanical movement function is enabled for the lens. Moving the lens changes the focus of the system. This allows the charging light source to change its original light path and generate a new focal point. The system features three zoom positions: 3 m from the ceiling to the floor, 2 m from the ceiling to the desktop, and 1.5 m from the ceiling to a person standing with a mobile phone. This allows the wireless light charging system to focus on the mobile phone receiver for charging in every corner within the indoor space. The wireless charging system features three focal lengths; the field of view (FOV) values are 0°, 24°, and 34°; the total length of the system is 635.45 mm; and the size of the spot diagram is 20% at various FOV angles at a spatial frequency of 80 lp/mm; and the lateral color was < ± 2 μm. A photodiode with an area of 12.0 mm was used as the receiver, and energy could be effectively received when the spot size was greater than or equal to the receiving area.

Computation of Analytical Zoom Locus Using Padé Approximation

When the number of lens groups is large, the zoom locus becomes complicated and thus cannot be determined by analytical means. By the conventional calculation method, it is possible to calculate the zoom locus only when a specific lens group is fixed or the number of lens groups is small. To solve this problem, we employed the Padé approximation to find the locus of each group of zoom lenses as an analytic form of a rational function consisting of the ratio of polynomials, programmed in MATLAB. The Padé approximation is obtained from the initial data of the locus of each lens group. Subsequently, we verify that the obtained locus of lens groups satisfies the effective focal length (EFL) and the back focal length (BFL). Afterwards, the Padé approximation was applied again to confirm that the error of BFL is within the depth of focus for all zoom positions. In this way, the zoom locus for each lens group of the optical system with many moving lens groups was obtained as an analytical rational function. The practicality of this method was verified by application to a complicated zoom lens system with five or more lens groups using preset patents.

Decentration and tilt of plate-haptic multifocal intraocular lenses in myopic eyes

BackgroundTo investigate the decentration and tilt of plate-haptic multifocal intraocular lenses (MfIOLs) in myopic eyes.MethodsMyopic (axial length [AXL] > 24.5 mm) and non-myopic (21.0 mm < AXL ≤ 24.5 mm) cataract eyes were enrolled in this prospective study and randomly assigned to receive implantation of Zeiss AT LISA tri 839MP lenses (Group A) or Tecnis ZMB00 lenses (Group B). In total, 122 eyes of 122 patients were available for analysis. Decentration and tilt of MfIOLs, high-order aberrations (HOAs), and modulation transfer functions (MTFs) were evaluated using the OPD-Scan III aberrometer 3 months postoperatively. Subjective symptoms were assessed with a Quality of Vision questionnaire.ResultsNear and distance visual acuities, tilt and horizontal decentration did not differ between the two groups, postoperatively. However, myopic eyes of Group B showed greater vertical decentration than those of Group A (− 0.17 ± 0.14 mm vs. -0.03 ± 0.09 mm, respectively), particularly when the MfIOLs were placed horizontally or obliquely. Overall decentration of myopic eyes was greater in Group B than in Group A (0.41 ± 0.15 mm vs. 0.16 ± 0.10 mm, respectively). In Group B, AXL was negatively correlated with vertical decentration and positively correlated with overall decentration. No such correlations were found in Group A. Intraocular total HOAs, coma, trefoil and spherical aberrations were lower in Group A than in Group B for a 6.0 mm pupil among myopic eyes. Generally, Group A had better MTFs and fewer subjective symptoms than Group B among myopic eyes.ConclusionsPlate-haptic design of MfIOLs may be a suggested option for myopic cataract eyes due to the less inferior decentration and better visual quality postoperatively.

Clinical Effects of Sensor AR40E Intraocular Lenses in Cataract Patients with Prominent Myopia

Cataracts are a complex group of eye disorders. Many studies suggest that blood circulation around the eyes, and a rise in intraocular pressure play important roles in glaucoma. Sensor AR40E artificial crystalline bodies can adjust intraocular pressure, improve activity in the optic nerve and increase blood flow to the eye fundus. BL1 can transport Yin and Yang. We designed a randomized, military blind, controlled clinical trial: Control group: (1) A Sensor only AR40E intraocular lens was applied to the skin of Qingming and retrobulbar acupoints on the rainy side, twice per week for 20 min every time, for two consecutive weeks; (2) acupuncture group: treatment was same as for the control group, but the eye was needled into Jingming and retrobulbar acupoints to achieve Qi; (3) Sensor AR40E intraocular lens group: treatment was the same as that for the acupuncture group, the main outcome measure was the change of intraocular pressure and the secondary outcome measure is the score change of WHOQOL ref (Taiwan version). Beneficial outcomes were realized in the right and left eye acupuncture groups and the Sensor AR40E intraocular lens group.

Evaluating the myopia progression control efficacy of defocus incorporated multiple segments (DIMS) lenses and Apollo progressive addition spectacle lenses (PALs) in 6- to 12-year-old children: study protocol for a prospective, multicenter, randomized controlled trial

BackgroundMyopia is increasing in prevalence and is currently recognized as a significant public health issue worldwide, particularly in China. Once myopia develops, appropriate clinical interventions need to be prescribed to slow its progression. Currently, several publications indicate that myopic defocus (MD) retards eye growth and myopia progression. However, no clinical trials have compared the outcomes of different MD spectacle lenses in the same observational group, especially in mainland China. The aim of the present study is to compare the myopia control efficiency of two different MD spectacle lenses: defocus incorporated multiple segments (DIMS) lenses and Apollo progressive addition lenses (PALs).MethodsThe trial is designed as a 3-year, prospective, randomized, multicenter clinical trial of schoolchildren treated with DIMS lenses and PALs. A total of 600 Chinese primary school children aged 6–12 years will be recruited, and each group is intended to include 300 subjects. The inclusion criteria are myopia between − 1.00 and − 5.00 diopters and astigmatism ≤ 1.50 diopters. The follow-up time points will be 1 month (m), 3 m, 6 m, 12 m, 18 m, 24 m, 30 m, and 36 m. The primary outcome will be determined by the difference between the two groups in cycloplegic spherical equivalent refraction between baseline and the last follow-up visit. The secondary outcome is the axial length, and the exploratory outcomes include ocular biometric measures, peripheral refraction, binocular vision, accommodation, compliance, and the results of questionnaires related to wearing experiences.DiscussionThe present study will be the first randomized controlled trial in myopic primary school children treated with DIMS lenses and PALs in China. The results will indicate whether and how much different MD mechanisms retard myopia progression and axial elongation. In addition, the comparison will provide information on the clinical efficacy and safety of DIMS lenses and PALs, including information related to wearing experiences and visual function.Trial registrationChinese Clinical Trial Registry (ChiCTR), ChiCTR1900025645. Registered on 3 September 2019. http://www.chictr.org.cn/showproj.aspx?proj=42927.

Noninvasive stiffness assessment of the human lens nucleus in patients with anisometropia using an ultrasound elastography system.

To investigate the significance of ultrasound elastography for evaluating stiffness of the human lens nucleus in patients with anisometropia. A total of 14 patients (28 eyes) with anisometropia were enrolled. The difference in refractive status between two eyes ≥-4.0 diopters (D) and the difference in axial length (AL) of the eyes was ≥3 mm. There were 5 males and 9 females with an average age of 62±3.3y. The test data of the long AL eye of each patient was included in group A (14 eyes), and test data of the eye with relative short AL was included in group B. Lens nuclear stiffness was measured with free-hand qualitative elastography by independent operators. Strain gray scale and color-coded elastography maps were recorded. In each case, three consecutive measurements were performed and strain ratio was used for statistical analysis. Photograph and sectional view of the lens were analyzed and archived by anterior segment image. In the long AL group, the strain rate in the nucleus of the lens was 0.16%±0.08%; in the short AL group, the strain rate in the nucleus of the lens was 0.54%±0.16%. Independent sample t-test analyses showed that the long AL group lens had a significantly smaller nuclear strain rate than the relatively short AL group, P<0.05. The relationship between human lens stiffness and different AL is demonstrated by ultrasound elastography. The long AL is associated with lower strain ratio and less resilience of the lens.

Assessment of Corneal Epithelial Thickness in Chronic Contact Lens Users Using Anterior Segment Optical Coherence Tomography

Abstract Introduction The corneal epithelium is stratified epithelium that is continuously renewed and provides the frontline of defence against invading ocular pathogens and a smooth refractive surface essential for vision. In the absence of a contact lens, pre-existing ocular trauma or disease, the epithelium maintains an inaccessible defence against attacks from pathogenic microorganisms, affording a high level of resistance against microbial invasion. Aim The aim of this study is to determine the effect of chronic use of contact lens on corneal epithelium thickness using anterior segment optical coherence topography as a non- invasive diagnostic accurate measure. Patients and Methods 30 eyes of control subjects who don’t wear contact lens along their life aged between 15-45 years ,where compared with similar age group of 30 eyes of chronic contact lens users; who wear contact lens every day not less than 8 hours per day for along time interval between 6 months up to 5 years. Results The average corneal epithelial thickness in the central, paracentral and midperipheral zones was 47.767 ± 5.550 µm, 46.267 ± 5.644 µm, 44.300 ± 4.858 µm, respectively, in chronic soft contact lens users; and 49.800 ± 3.316 µm, 49.200 ± 3.367 µm, 45.733 ± 2.333 µm ,in control group who had never worn contact lens. There were insignificant thinning of corneal epithelium of soft contact group compared to control group regarding the average corneal epithelial thickness in those 3 zones. In all the 8 sectors of corneal epithelium of paracentral zone and midperipheral zones there is insignificant thinning between the two groups except for the inferior temporal sector in the paracentral zone and mid peripheral zone, which shows significant thinning in soft contact lens group compared to control group. The corneal epithelial thickness in the inferior temporal sector of paracentral and mid peripheral zones was 46.333 ± 5.677 µm, 44.933 ± 4.813 µm, respectively, in chronic soft contact lens users compared to 48.767 ± 3.266 µm, 46.900 ± 2.510 µm in control group (p = 0.046, p = 0.052, respectively). Conclusion AS-OCT helps us to evaluate the corneal epithelium of contact lens users, which could be very useful in corneal refractive surgeries in patients depending on contact lens in their lives as a comfortable refractive aid, It is necessary to do AS-OCT hand on hand with pentacam in patients underwhelming refractive surgery to give a proper assessment to their corneal epithelium before determining which type of refractive surgery suits them.

Design of a high-efficiency system with combined reflectors for a light-emitting diode front fog lamp

This paper provides a design method for a light-emitting diode front fog lamp system based on a freeform surface and an improved quadric surface. First, a light-receiving reflector is used to converge the light-emitting diode beam to form an equivalent lighting point. Then, the relationship between the point and the light pattern on the work surface is calculated, and the freeform surface is constructed based on Snell’s law and non-imaging optical theory. Finally, two compensated reflectors are added at both ends of the freeform surface to reflect the unutilized light to achieve the compensation effect. By application of combined reflectors, the light pattern at the work surface 25 m away can satisfy the requirement of ECE R19 Revision 7. Also, this system has the advantages of small size and high efficiency because lens or prism groups are avoided. And the utilization of a compensated surface also increases light efficiency. Finally, a prototype model is tested, which also meets the regulatory requirements.

Production of a Strain-Measuring Device with an Improved 3D Printer.

A traditional strain measurement sensor needs to be electrified and is susceptible to electromagnetic interference. In order to solve the fluctuations in the analog electrical signal in a traditional strain gauge operation, a new strain measurement method is presented here. It uses a photographic technique to display the strain change by amplifying the change of the pointer displacement of the mechanism. A visual polydimethylsiloxane (PDMS) lens with a focal length of 7.16 mm was added to a smartphone camera to generate a lens group acting as a microscope to capture images. It had an equivalent focal length of 5.74 mm. Acrylonitrile butadiene styrene (ABS) and nylon amplifiers were used to test the influence of different materials on the sensor performance. The production of the amplifiers and PDMS lens is based on improved 3D printing technology. The data obtained were compared with the results from finite element analysis (FEA) to verify their validity. The sensitivity of the ABS amplifier was 36.03 ± 1.34 µε/µm, and the sensitivity of the nylon amplifier was 36.55 ± 0.53 µε/µm.

Contact Lenses and Infectious Keratitis: From a Case-Control Study to a Computation of the Risk for Wearers.

Contact lens (CL)-related microbial keratitis (MK) has major public health implications, with about 300 million wearers worldwide, and certain potentially modifiable risk factors. This study aimed to identify the risk factors of CL-related MK. A multicenter case-control study was conducted between 2014 and 2017. Cases presenting with CL-related MK were submitted to an anonymous 52-item questionnaire, which was also completed by healthy controls. Univariate followed by multivariate logistic regression analysis was performed. Risk factors for CL-related MK were given as odds ratio (OR) with 95% confidence interval and P-value. The study included a total of 2267 patients (1198 cases and 1069 controls). The MK risk factors for the daily disposable lenses group were exceeding the lens renewal period (OR = 9.16, P = 0.008) and occasionally wearing CL when sleeping (OR = 15.83, P = 0.035). The most important risk factors in the nondaily disposable lenses group were lens cleaning solution distributed by eye care brands (OR = 3.50, P < 0.001) and failure to renew lens cases (OR = 3.39, P = 0.001). Statistically and clinically significant variables were used to establish the MK risk equation for CL wearers, allowing an individual calculation of the risk of MK under lenses. The MK risk equation is a valuable tool for educating patients about the risks associated with wearing CL. It allows the patient to be informed about their overall risk of infection while detailing the precipitating elements of the infectious risk with the aim of modifying risk behavior.

Wide-angle visible video diagnostics for JT-60SA utilizing EDICAM

A multi-purpose, wide-angle, visible overview video diagnostic, based on the EDICAM camera, was designed for JT-60SA superconducting tokamak, in order to fulfill both machine protection and scientific observation purposes. The detector is located inside the ‘port plug’ (a ca. 3 m long re-entrant tube), relatively close to the plasma boundary; the EDICAM can tolerate the magnetic field at this location as well as the radiation levels in the early phases of the experiment. A rail-and-carriage system is used to move the detector between the opening of the port plug and the measurement location. A 4-point docking system ensures the precise and robust positioning of the optics, firmly holding the detector also in the event of disruptions or earthquakes. The camera is running under atmospheric condition, separated by a sapphire window from the plasma vacuum. The vacuum window is protected by a water-cooled pin-hole from mechanical impacts and plasma heat; the pin-hole is also the first element of the detector’s optical system. The optics consists of two lens groups and a prism; the housing is made of stainless steel, in order to reduce eddy currents and thus avoid large forces acting on the system in a disruption.