Bone Length Research Articles

Patient sex and race are associated with differences in coronal plane alignment classification in native arthritic knees.

Purpose: The purpose of this study was to evaluate associations between demographics and Coronal Plane Alignment of the Knee (CPAK) classification in pre-surgical TKA patients. Methods: This is a retrospective study of 1167 patients with knee osteoarthritis who underwent TKA. CPAK categories I-IX were determined by arithmetic mechanical hip-knee-ankle angle and joint line obliquity measurements from pre-operative bone length radiographs. Patient age, sex, body mass index (BMI) and race were collected. Chi-square test of independence and adjusted Pearson's residuals evaluated associations between CPAK classification and demographics. Results: There was a significant association between CPAK phenotypes I-IX and patient sex (X2 = 5.8, p < 0.01). A positive association was found between both men and CPAK phenotype I, and women and CPAK phenotype VII. A positive association was found between African American patients and CPAK phenotype III and a negative association was found between African American patients and CPAK phenotype I (X2 =14.8, p-value = 0.01). There was no association between age and BMI with CPAK phenotypes (n.s.). Conclusion: These results indicate that there are unidentified sex and race differences that exist in the CPAK classification of native arthritic knees. Patient characteristics play a significant role in determining patient knee phenotypes. Further research should investigate whether these characteristics warrant inclusion in pre-operative preparations, aiming to enhance the personalization of arthroplasty procedures.

Exploring the Role of Free Tissue Transfers in the Preservation of Bone Length and Knee Joint Function after Lower Limb Trauma: A Retrospective Analysis.

Lower limb trauma often results in mangled extremities, and in some cases, complete amputation may be necessary. However, limiting the extent of amputation and preserving the major knee joint are crucial to enhance mobility and overall functionality. By providing painless soft tissue coverage on the stump, early prosthesis use and the initiation of physiotherapy become more feasible. Soft tissue transfers hold the potential to benefit patients in two essential aspects: first, resolving soft tissue deficiencies without causing bone shortening, and second, preparing the stump to enhance overall functionality. A retrospective study conducted at Chang Gung Memorial Hospital (2009-2016) focused on lower limb amputation patients who underwent soft tissue transfers at different time periods compared to those without stump reconstruction. Out of the 2391 cases of lower limb injuries treated operatively, 117 amputations were performed in 110 patients (44 above the knee and 73 below the knee). Among them, 12 patients received soft tissue transfers for limb salvage and soft tissue deficiency after amputations. It was observed that patients in this group were typically younger, predominantly female, had longer hospital stays, and underwent a greater number of surgical procedures (p < 0.05). Through the use of soft tissue transfers, successfully preserved tibial bone length and functional knee joint in selected patients was achieved. This approach effectively resolved soft tissue deficiencies following lower limb amputations, optimizing physiotherapy and facilitating functional rehabilitation.

Osseointegration of a hydroxyapatite-coated stem in femoral neck fractures in the over-80s.

In the over-80s, femoral bone is often osteoporotic and unlikely to be conducive to periprosthetic bone rehabitation. This observation often leads to cemented fixation for hemiarthroplasty in femoral neck fracture. Hydroxyapatite is a bioactive coating that has already demonstrated its osteoinductive properties. Our hypothesis is that hydroxyapatite enables prosthetic osseointegration in patients over 80, as well as periprosthetic cortical thickening. The objective was to evaluate the osseointegration of a hydroxyapatite-coated femoral stem in femoral neck fractures in the over-80s, and the evaluation of the periprosthetic bone regeneration permitted by hydroxyapatite. This was a retrospective study. Osseointegration and periprosthetic bone regeneration were assessed on pre-operative, immediate post-operative and last follow-up radiographs with Engh score, O-SS score, cortical index, Canal Bone Ration (CBR) and Canal Fill Ratio (CFR). One hundred and forty-six patients were included. At last follow-up, 99.3% (n = 145) of stems were osseointegrated. The mean Engh score was 19.9 [SD 3.1]. The mean O-SS score was 19.1 [SD 2.4], corresponding to very good osseointegration. The mean CBR at last follow-up was 0.48 [SD 0.07], corresponding to a non-osteoporotic femur. There was a significant difference with pre-operative CBR (p < 0,001). The pre-operative cortical index and the index at the last follow-up were significantly different for all levels of measurement (p < 0,001). The CFR at last follow-up was also significantly different with the post-operative CFR (p < 0,001). This study shows the value of using a hydroxyapatite-coated stem on senile, osteoporotic bone to improve cortical thickness along the entire length of femoral bone.

Osteo-morphometric Approach to the Heads of Dromedaries (Camelus dromedarius, L, 1758): Case of the Algerian Targui Population

Background: This study, conducted on a sample of 60 bones, provides an in-depth analysis of the main characteristics of dromedary skulls, their variability and the correlations between their various parts. These data have made it possible to isolate measurements that could provide a general overview in camel craniometry. This area lacks research and this work, by focusing on sexual dimorphism, which is an important diagnostic factor, aims to deepen the understanding of the Targui population in the Ouargla region of Algeria. Methods: This study comprising a total of 30 males and 30 females Targui, organized into 4 groups: 15 young adult males (aged 5 to 9 years), 15 adult males (over 10 years), 15 young adult females (aged 5 to 9 years) and 15 adult females (over 10 years). The skulls are collected after slaughter. Each cranium was weighed and then measured using a caliper (15 linear measurements: 7 length measurements, 6 width measurements, 2 skull height measurements). The data underwent univariate, bivariate and multivariate statistical analysis. Results: For each measured variable, males are larger than females. The lateral width of the neurocranium CL5 shows the highest level of sexual dimorphism with an index close to 55%, followed by weight, which reaches 28.74%. This dimorphism is clear in the skull: males not only have larger bones but also longer ones, as is the case with cattle. This is a significant difference compared to other ruminants such as sheep or goats, where bone length is not a dimorphic parameter.

Larger stem to bone diameter ratio predicts lower cemented endoprosthesis failure.

With continued advances in treatment options, patients with endoprosthetic reconstruction are living longer and consequently relying upon their devices for a longer duration. Major causes of endoprosthesis failure include aseptic loosening and mechanical failure. In the setting of tumor resection, loss of bone stock and use of radiation therapy increase the risk for these complications. As such, considerations of remaining native bone and stem length and diameter may be increasingly important. We asked the following questions: (1) What was the overall rate of endoprosthesis failure at a minimum of 5-year follow-up? (2) Does resection length increase implant failure rates? (3) Does implant size and its ratio to cortical width of bone alter implant failure rates? We retrospectively analyzed patient outcomes at a single institution between the years of 1999-2022 who underwent cemented endoprosthetic reconstruction at the hip or knee and identified 150 patients. Of these 150, 55had a follow-up of greater than 5 years and were used for analysis. Radiographs of these patients at time of surgery were assessed and measured for resection length, bone diameter, stem diameter, and remaining bone length. Resection percentage, and stem to bone diameter ratios were then calculated and their relationship to endoprosthesis failure were analyzed. Patients in this cohort had a mean age of 55.8, and mean follow-up of 59.96 months. There were 78 distal femoral replacements (52%), 16 proximal femoral replacements (10.7%), and 56 proximal tibial replacements (37.3%). There were five patients who experienced aseptic loosening and six patients who experienced mechanical failure. Patients with implant failure had a smaller mean stem to bone diameter (36% vs. 44%; p = 0.002). A stem to bone diameter of 40% appeared to be a breaking point between success and failure in this series, with 90% of patients with implant failure having a stem: bone ratio less than 40%. Stem to bone ratio less than 40% increased risk for failure versus stems that were at least 40% the diameter of bone (6/19 [31.6%] vs. 0/36 [0%]; odds ratio 0.68; p < 0.001). Resection length did not appear to have an impact on the rates of aseptic loosening and mechanical failure in this series. Data from this series suggests a benefit to using stems with a larger diameter when implanting cemented endoprostheses at the hip or knee. Stems which were less than 40% the diameter of bone were substantially more likely to undergo implant failure.

SUPERhip Reconstruction Treatment in Patients with Congenital Femoral Deficiency of Paley's Classification Type 1b.

Congenital femoral deficiency (CFD) is a challenging and complex condition that causes limb lengthening. We focused on the clinical and radiographic results of SUPERhip procedures in patients with congenital femoral deficiency type 1b, according to Paley's classification, prior to femoral lengthening. We reviewed all records and radiographs of patients who underwent this procedure between 2005 and 2020. We included 26 patients, with clinical and radiographic assessments performed during pre- and post-operative evaluations. There were twenty-six patients (15 right vs. 11 left), with a mean age of 7 years (1-18). Most of the patients were female (17 patients; 65.4%). Twenty (76.9%) patients were undergoing their first procedure and six (23.1%) had already undergone a previous surgery. There was a significant improvement in all radiographic parameters, with the mean preoperative and postoperative Neck-Shaft Angle (NSA) being 72.3 ± 7.1° vs. 133.1 ± 12.7°, the Center-Edge Angle (CEA) 16.8 ± 9.8° vs. 33.5 ± 14.1°, and the Acetabular Index (AI) 27.8 ± 6.9° vs. 16.4 ± 6.8°, respectively. The complication rate was 15.4%, predominantly affecting patients under 5 years old. The SUPERhip procedure is an effective and reproducible technique for clinical and radiographic correction to a significant degree in patients with Paley's type 1b CFD, in preparation for bone lengthening surgery.

Nasal profile changes after orthodontic tooth extraction in Class II, Division 1 malocclusion patients: A retrospective study

IntroductionThis study aimed to investigate changes in the facial soft-tissue profile, especially the nose, following fixed orthodontic treatment, with or without tooth extraction, in individuals diagnosed with dental Class II malocclusion. Materials and methodsCephalometric images of 81 individuals with dental Class II malocclusion who underwent fixed orthodontic treatment were assessed before and after treatment. The participants were categorized into three groups: non-extraction; upper first premolar extraction; and four first premolar extractions. The parameters measured were: upper lip height, upper lip to E-plane, lower lip to E-plane, lower lip height, nasolabial angle, nasomental angle, facial convexity, lower anterior face height, soft-tissue facial convexity, nasal tip angle, nasal bridge length, N′-nasal bridge point, nasal bone length, nasal bone angle, nasal depth, columella convexity, and nose height. ResultsWithin the upper two extraction group, there were significant increases at the start and end periods in nasolabial angle (P = 0.023), nasal depth Pr to Ac (P = 0.027), and nasal depth Pr to N-Prn (P = 0.040); and decreases in columella convexity (P = 0.010), upper lip to E-plane (P = 0.009), and nasomental angle (P = 0.009). There were significant results in comparisons between measurements based on the extraction status in the mean nasolabial angle (P = 0.011), mean columella convexity (P = 0.028), and mean lower lip to E-plane (P = 0.045). ConclusionOrthodontic treatment involving tooth extraction may potentially affect the nasolabial angle and nasal depth. During treatment planning, it is crucial to consider the potential changes that may occur to the nose and any alterations that may be needed to achieve the desired esthetic outcome.

Am I big boned? Bone length scaled reference data for HRpQCT measures of the radial and tibial diaphysis in White adults

Cross-sectional size of a long bone shaft influences its mechanical properties. We recently used high-resolution peripheral quantitative computed tomography (HRpQCT) to create reference data for size measures of the radial and tibial diaphyses. However, data did not take into account the impact of bone length. Human bone exhibits relatively isometric allometry whereby cross-sectional area increases proportionally with bone length. The consequence is that taller than average individuals will generally have larger z-scores for bone size outcomes when length is not considered. The goal of the current work was to develop a means of determining whether an individual's cross-sectional bone size is suitable for their bone length. HRpQCT scans performed at 30 % of bone length proximal from the distal end of the radius and tibia were acquired from 1034 White females (age = 18.0 to 85.3 y) and 392 White males (age = 18.4 to 83.6 y). Positive relationships were confirmed between bone length and cross-sectional areas and estimated mechanical properties. Scaling factors were calculated and used to scale HRpQCT outcomes to bone length. Centile curves were generated for both raw and bone length scaled HRpQCT data using the LMS approach. Excel-based calculators are provided to facilitate calculation of z-scores for both raw and bone length scaled HRpQCT outcomes. The raw z-scores indicate the magnitude that an individual's HRpQCT outcomes differ relative to expected sex- and age-specific values, with the scaled z-scores also considering bone length. The latter enables it to be determined whether an individual or population of interest has normal sized bones for their length, which may have implications for injury risk. In addition to providing a means of expressing HRpQCT bone size outcomes relative to bone length, the current study also provides centile curves for outcomes previously without reference data, including tissue mineral density and moments of inertia.

Nomogram for fetal limb bones in Chinese ethnicity

Objective To construct fetal limb bone nomograms in the Chinese ethnic population. Methods This was a prospective cross-sectional study on singleton pregnancies between 12 and 37 weeks of gestation. Femur, tibia, fibula, humerus, ulna, radius, and foot length were measured in a standardized manner by one of the three sonographers. Each fetus’s measurements were only included once and those who developed maternal or fetal complications were excluded. Fractional polynomial regression model was used to obtain the 3rd, 10th, 50th, 90th, and 97th centiles for each of the limb measurement. Z-score for the 50th centile of each fetal limb measurement was then compared with published nomograms derived from other populations. Results Of the 843 scans performed, 775 were included in analysis after excluding conditions such as pre-eclampsia, chromosomal abnormalities, single umbilical artery and skeletal dysplasia. Comparison with other populations showed that Chinese had shorter fetal limb bone lengths than the Caucasian and Afro-Caribbean populations. Conclusion This study established nomograms for all the fetal limb bones in the Chinese ethnic population, which showed lengths comparatively shorter than Caucasian and Afro-Caribbean nomograms. This would reduce the false alarm of short fetal limb bone lengths and its consequent anxiety and intervention.

Aquatic therapy in congenital malformation during the use of external fixator for bone lengthening: It is possible?

ObjectivesThe objective of this study is to describe the rehabilitation of individuals with Congenital Malformations (CMF) during the use of an External Fixator (EF) in Aquatic Therapy (AT) and to analyze the association between diagnosis, EF type and location with rehabilitation process outcomes, surgical intervention, and adverse effects. MethodsThis retrospective study included 29 medical records from which the personal and rehabilitation data of the patient were collected. The AT used was described and the outcome variables were associated. The medical records were selected by screening the database of the CMF clinic at the AACD. The inclusion criteria were participants with CMF who used EF treated between 2011 and 2019 of both genders and without age restriction. The exclusion criteria were incomplete medical record data or not undergoing AT while using EF. The extracted data included diagnosis, gender, age, EF type and location, objective of the surgery, adverse events, surgical interventions, time of rehabilitation in AT, physiotherapeutic objectives, and rehabilitation process outcomes in AT. ResultsThe mean age of the participants was 12.1 ± 3.99 years, with male predominance (55 %) and hemimelia cases (37 %). The most used EF was circular (51 %), located in the femur (37 %), and the main objective of surgery was bone lengthening (52 %). The most recurrent adverse effect was infection (62 %) and 76 % completed AT. There was no association between the variables analyzed. ConclusionsIt was possible to describe CMF rehabilitation with EF in AT. There was no association between the variables analyzed.

Transcutaneous Osseointegrated Prosthesis Systems (TOPS) for Rehabilitation After Lower Limb Loss: Surgical Pearls.

Transcutaneous Osseointegrated Prosthesis Systems (TOPS) for Rehabilitation After Lower Limb Loss: Surgical Pearls.

BONE RECONSTRUCTION IN THE TREATMENT OF TIBIAL HEMIMELIA: AN ALTERNATIVE TO AMPUTATION?

To evaluate the advantages and disadvantages of bone reconstruction and lengthening compared to amputation in the treatment of tibial hemimelia for patients and their families. Systematic review of articles published in English and Portuguese between 1982 and 2022 in the MEDLINE, PubMed, Cochrane and SciELO databases. The variables of interest were: year of publication, sample characteristics, classification of tibial hemimelia according to Jones, treatment outcome and follow-up time. A total of eleven articles were included in the scope of this review. The studies involved 131 patients, 53.4% male and 46.6% female. The age of the patients who underwent a surgical procedure ranged from 1 year and 10 months to 15 years. The most common type was Jones' I (40.9%). The most recurrent complications in the reconstruction treatment were: infection of the external fixator path, flexion contracture (mainly of the knee), reduction in the range of motion of the knee and ankle. We did not find enough relevant studies in the literature to prove the superiority of reconstruction. Amputation remains the gold standard treatment for tibial hemimelia to this day. Level of Evidence III, systematic review of level III studies.

Effects of poor maternal diet during gestation are detected in F2 offspring.

Poor maternal nutrition of F0 ewes impairs F1 offspring growth, with minimal differences in glucose tolerance or select metabolic circulating factors, and independent of differences in residual feed intake (RFI). To determine if poor maternal nutrition in F0 ewes alters F2 offspring growth, circulating leptin, feed efficiency, or glucose tolerance, F0 ewes (n = 46) pregnant with twins were fed 100% (control), 60% (restricted), or 140% (over) of National Research Council requirements from days 30 ± 0.02 of gestation until parturition. At 16 to 19 mo of age, female F1 (n = 36) offspring were bred to generate F2 offspring [CON-F2 (n = 12 ewes; 6 rams), RES-F2 (n = 7 ewes; 13 rams), or OVER-F2 (n = 13 ewes; 9 rams) corresponding to diets of the granddam (F0)]. Lamb body weights (BW) and blood samples were collected weekly from days 0 to 28 and every 14 d until day 252 of age. Circulating leptin was measured in serum at days 0, 7, 14, 56, 210, and 252. An intravenous glucose tolerance test was performed at days 133 ± 0.28. At days 167 ± 0.33, individual daily intake was recorded over a 77-d feeding period to determine RFI. Rams were euthanized at days 285 ± 0.93, and body morphometrics, loin eye area (LEA), back fat thickness, and organ weights were collected and bone mineral density (BMD) and length were determined in the right hind leg. During gestation, OVER-F1 ewes tended to be 8.6% smaller than CON-F1 ewes (P ≤ 0.06). F2 offspring were of similar BW from birth to day 70 (P ≥ 0.20). However, from days 84 to 252, RES-F2 offspring tended to be 7.3% smaller than CON-F2 (P ≤ 0.10). Granddam diet did not influence F2 ram body morphometrics, organ or muscle weights, LEA, adipose deposition, or leg BMD (P ≥ 0.84). RES-F2 (-0.20) and CON-F2 (-0.45) rams tended to be more feed efficient than CON-F2 ewes (0.31; P ≤ 0.08). No effects of granddam diet were observed on glucose or insulin average or baseline concentrations, area under the curve, first-phase response, or ratio (P ≥ 0.52). However, CON-F2 rams (297mg/dL ± 16.5) had a greater glucose peak compared with RES-F2 rams (239mg/dL ± 11.2; P = 0.05). Peak insulin concentrations were not influenced by granddam diet (P = 0.75). At d 56, RES-F2 and OVER-F2 offspring had 53.5% and 61.8% less leptin compared with CON-F2 offspring, respectively (P ≤ 0.02). These data indicate that poor maternal nutrition impacts offspring growth into the second generation with minimal impacts on offspring RFI, glucose tolerance, and circulating leptin.

The use of Three-Dimensional Printing in Orthopaedics: a Systematic Review and Meta-analysis.

3D-printing is a rapidly developing technology with applications in orthopaedics including pre-operative planning, intraoperative guides, design of patient specific instruments and prosthetics, and education. Existing literature demonstrates that in the surgical treatment of a wide range of orthopaedic pathology, using 3D printing shows favourable outcomes. Despite this evidence 3D printing is not routinely used in orthopaedic practice. We aim to evaluate the advantages of 3D printing in orthopaedic surgery to demonstrate its widespread applications throughout the field. We performed a comprehensive systematic review and meta-analysis. AMED, EMBASE, EMCARE, HMIC, PsycINFO, PubMed, BNI, CINAHL and Medline databases were searched using Healthcare Databases Advanced Search (HDAS) platform. The search was conducted to include papers published before 8th November 2020. Clinical trials, journal articles, Randomised Control Trials and Case Series were included across any area of orthopaedic surgery. The primary outcomes measured were operation time, blood loss, fluoroscopy time, bone fusion time and length of hospital stay. A total of 65 studies met the inclusion criteria and were reviewed, and 15 were suitable for the meta-analysis, producing a data set of 609 patients. The use of 3D printing in any of its recognised applications across orthopaedic surgery showed an overall reduction in operative time (SMD = -1.30; 95%CI: -1.73, -0.87), reduction in intraoperative blood loss (SMD = -1.58; 95%CI: -2.16, -1.00) and reduction in intraoperative fluoroscopy time (SMD = -1.86; 95%CI: -2.60, -1.12). There was no significant difference in length of hospital stay or in bone fusion time post-operatively. The use of 3D printing in orthopaedics leads to an improvement in primary outcome measures showing reduced operative time, intraoperative blood loss and number of times fluoroscopy is used. With its wide-reaching applications and as the technology improves, 3D printing could become a valuable addition to an orthopaedic surgeon's toolbox.

Constructing an Osseointegrated Prosthetic Leg.

Constructing an osseointegrated prosthetic leg is the necessary subsequent phase of care for patients following the surgical implantation of an osseointegrated prosthetic limb anchor. The surgeon implants the bone-anchored transcutaneous implant1,2 and the prosthetist constructs the prosthetic leg, which then attaches to the surgically implanted anchor. An osseointegration surgical procedure is usually considered in patients who are unable to use or are dissatisfied with the use of a socket prosthesis. This present video article describes the techniques and principles involved in constructing a prosthetic leg for transfemoral and transtibial amputees, as well as postoperative patient care. Preoperatively, as part of a multidisciplinary team approach, the prosthetist should assist in patient evaluation to determine suitability for osseointegration surgery. Postoperatively, when approved by the surgeon, the first step is to perform an implant inspection and to take patient measurements. A temporary loading implant is provided to allow the patient to start loading the limb. When the patient is approved for full-length leg to begin full weight-bearing, the implant and prosthetic quality are evaluated, including torque, implant position, bench alignment, static alignment in the standing position, and initial dynamic alignment. This surgical procedure also requires long-term, continued patient care and prosthetic maintenance. For patients who are dissatisfied with the use of a socket prosthesis, adjustments can often be made to improve the comfort, fit, and performance of the prosthesis. Non-osseointegration surgical options include bone lengthening and/or soft-tissue contouring. Osseointegration can be provided for amputees who are expressing dissatisfaction with their socket prosthesis, and typically provides superior mobility and quality of life compared with nonoperative and other operative options3,4. Specific differences between the appropriate design and construction of osseointegrated prostheses versus socket prostheses include component selection, component fit, patient-prosthesis static and dynamic alignment, tolerances and accommodations, and also the expected long-term changes in patient joint mobility and behavior. Providing an osseointegrated prosthesis according to the principles appropriate for socket prostheses may often leave an osseointegrated patient improperly aligned and provoke maladaptive accommodations, hindering performance and potentially putting patients at unnecessary risk for injury. Review articles describing the clinical outcomes of osseointegration consistently suggest that patients with osseointegrated prostheses have improved prosthesis wear time, mobility, and quality of life compared with patients with socket prostheses. Importantly, studies have shown that osseointegrated prostheses can be utilized in patients with short residual limbs that preclude the use of a socket prosthesis, allowing them to regain or retain function of the joint proximal to the short residuum5,6. Osseoperception improves patient confidence during mobility7. Because there is an open skin portal, low-grade soft-tissue infection can occur, which is usually treated with a short course of oral antibiotics. Much less often, soft-tissue debridement or implant removal may be needed to treat infection8. Periprosthetic fractures can nearly always be treated with familiar fracture fixation techniques and implant retention9,10. Falls can lead to periprosthetic fractures.Malalignment can lead to unnecessary pathologic joint forces, soft-tissue contractures, and an accommodative gait.Inadequately sophisticated components can leave patients at a performance deficit.Wearing the prosthetic leg while sleeping may lead to rotational forces exerted on the limb, which may cause prolonged tension on the soft tissue. QTFA = Questionnaire for Persons with a Transfemoral AmputationLD-SRS = Limb Deformity Modified Scoliosis Research SocietyPROMIS = Patient-Reported Outcomes Measurement Information SystemEQ-5D = EuroQol 5 Dimensions.

Enhancing skeleton-based human motion recognition with Lie algebra and memristor-augmented LSTM and CNN

&lt;abstract&gt;&lt;p&gt;Lately, as a subset of human-centric studies, vision-oriented human action recognition has emerged as a pivotal research area, given its broad applicability in fields like healthcare, video surveillance, autonomous driving, sports, and education. This brief applies Lie algebra and standard bone length data to represent human skeleton data. A multi-layer long short-term memory (LSTM) recurrent neural network and convolutional neural network (CNN) are applied for human motion recognition. Finally, the trained network weights are converted into the crossbar-based memristor circuit, which can accelerate the network inference, reduce energy consumption, and obtain an excellent computing performance.&lt;/p&gt;&lt;/abstract&gt;

Research on Teaching and Dance Creation of Chinese Folk Dance in the Information Age

Abstract In this paper, we use motion capture technology to collect typical movements of Chinese folk dances and establish three-dimensional character models with the characteristics of human motion continuity and bone length invariance to discriminate the trajectory of skeletal movements. Video is used to export the data of Chinese folk dance. Design methods for extracting folk music and dance features to form a model for creating dances. Suppressing the noise of the original dance music, improving the accuracy of the fundamental frequency extraction of the music signal, and manually scoring the dance creation generation program are all benefits of using the Chebyshev filter. We propose the teaching method of Chinese folk dance in online broadcasting mode and carry out teaching experiments to compare the cooperative learning effect and dance technique evaluation effect between traditional dance teaching method and online broadcasting video lecture teaching method. The dance creation and generation program proposed in this paper is able to achieve a dance movement similarity of 0.92, which is able to preserve the original dance posture of Chinese folk dances to a greater extent. The results of the technical evaluation show that the teaching effects of the two teaching methods present significant differences in the four methods of basic technique, pair cooperation, dance expression, and total score, i.e., P&lt;0.05, which shows that the online live video explanation method is more suitable for the teaching of ethnic folk dance in the information age.

Morphological Patterns of the Long Limb Bones in the Lesser Bandicoot Rat, Bandicota Bengalensis (Rodentia: Muridae)

We examined the morphological patterns of long limb bones in the Lesser Bandicoot rat (Bandicota bengalensis) using univariate, bivariate and multivariate statistical analyses. A total of 18 morphometric measurements were taken using 30 adult specimens (11 males and 19 females) of B. bengalensis. The univariate analysis revealed non-significant right-left difference in the longest limb bones. Therefore, right side limb bones were used for further analyses. For most of the limb bone measurements, the mean values of the males were slightly larger than that of the females. However, the coefficient of variation did not differ significantly between the sexes. Most measurements of the fore limb and hind limb bones were significantly correlated with the length of respective bones. Allometric analysis exhibited isometry for many of the variables of humerus, ulna, femur, and tibia against the length of respective bones. These trends were also implied by the principal component analysis, as high factor loadings were observed for 80% and 75% variables of the forelimb and hindlimb, respectively. The epicondylar regions of the stylopodial bones (humerus and femur) and the width of radius showed non-significant correlation and/or negative allometry. Finally, our results suggest slightly male-biased sexual size dimorphism in the long limb bones and the growth patterns of the bone parts are greatly variable might be linked to the individual bone functions. Bangladesh J. Zool. 51(2): 191-203, 2023

Radiological characteristics of skeletal growth in neonates and infants with achondroplasia.

Achondroplasia (ACH) is the most common form of skeletal dysplasia characterized by a rhizomelic short stature. Radiological skeletal findings in pediatric and adult patients with ACH include short long bones, a relatively longer fibula compared to the tibia, a narrow lumbar interpedicular distance, and a hypoplastic iliac wing. Nonetheless, the characteristics of skeletal growth during the neonatal and infantile periods have scarcely been explored. Therefore, this retrospective study aimed to analyze the radiological skeletal growth during the neonatal and infantile periods in 41 Japanese patients with genetically confirmed ACH. The length of long bones in the upper and lower limbs and the lumbar interpedicular distances at L1 and L4 were measured. These parameters showed significant positive correlations with age. The upper segment-to-lower segment ratio in the lower limbs resembled the data of healthy controls from previous reports. The L1/L4 and fibula/tibia ratios increased with age, suggesting that some representative skeletal phenotypes of ACH were less distinct during the neonatal and infantile periods. In conclusion, for the first time, this study radiologically characterized skeletal growth during the neonatal and infantile periods of patients with genetically confirmed ACH.

Estimation of gestational age in buffaloes (Bubalus bubalis) by transabdominal and transrectal ultrasonography

The aims of the presented study were (1) to examine the relationship between foetal measurements and gestational age (GA), (2) to generate GA formulas, and (3) to investigate the estimation of GA by transabdominal ultrasonography in buffaloes. Thirteen pregnant buffaloes were used in the study. Transrectal ultrasonography was performed between Day (D) 28 and 112 of gestational age, whereas transabdominal ultrasonography was between 126 and 294. The diameters of embryonic (EVD) and amniotic (AVD) vesicles, crown-rump length (CRL), occipito-nasal length (ONL), biparietal diameter (BPD), orbit diameter (OD), cervical, thoracic, lumbar and coccygeal vertebrae lengths (CVL, TVL, LVL, CcVL), abdominal diameter (AD), chest diameter (CD), umbilical cord diameter (UCD), scapula, humerus, radius-ulna, metacarpus, femur, tibia, and metatarsus lengths (SL, HL, RUL, McL, FL, TL, MtL), diameters of transversal heart (THD), stomach (SD), kidney (KD), and outer diameter, circumference and area of placentomas (OPD, OPC, OPA) were measured by ultrasonography. All 26 parameters were highly correlated with GA (r = 0.968 – 0.999). The observation of the foetus was evident in all animals via transabdominal ultrasonography, and all parameters except EVD, AVD, and CRL could be measured on D 126. In addition, heartbeats, the sign of foetal vitality, could be observed in 11 of 13 living foetuses. This study is the first to demonstrate that transabdominal ultrasonography can be used to estimate GA in buffaloes. In addition, GA formulas related to ONL, CVL, TVL, LVL, CcVL, extremity bone lengths, THD, UCD, PC, and PA measurements were created for the first time in buffaloes.