Legged Microrobot Research Articles

Forward and backward control of an ultrafast millimeter-scale microrobot via vibration mode transition.

The ability to move backward is crucial for millimeter-scale microrobots to navigate dead-end tunnels that are too narrow to allow for turning maneuvers. In this study, we introduce a 15-mm-long legged microrobot, BHMbot-B, which is capable of rapid forward and backward locomotion through vibration mode transition control. By properly arranging the vibratory motions of the magnet, cantilever, and linkages, the pitching movement of the body and the vibration of the forelegs are in phase during the first-order vibration mode of the cantilever and in antiphase during the second-order mode, which induces the forward and backward movement of the microrobot. Owing to its outstanding load-bearing capacity, the BHMbot-B equipped with dual electromagnetic actuators, an onboard battery, and a control circuit, can execute complex running trajectories under wireless command. Its maximum untethered running speeds are evaluated as 18.0 BL/s (360 mm/s) in the forward direction and 16.9 BL/s (338 mm/s) in the backward direction.

A wireless controlled robotic insect with ultrafast untethered running speeds

Running speed degradation of insect-scale (less than 5 cm) legged microrobots after carrying payloads has become a bottleneck for microrobots to achieve high untethered locomotion performance. In this work, we present a 2-cm legged microrobot (BHMbot, BeiHang Microrobot) with ultrafast untethered running speeds, which is facilitated by the complementary combination of bouncing length and bouncing frequency in the microrobot’s running gait. The untethered BHMbot (2-cm-long, 1760 mg) can achieve a running speed of 17.5 BL s−1 and a turning centripetal acceleration of 65.4 BL s−2 at a Cost of Transport of 303.7 and a power consumption of 1.77 W. By controlling its two front legs independently, the BHMbot demonstrates various locomotion trajectories including circles, rectangles, letters and irregular paths across obstacles through a wireless control module. Such advancements enable the BHMbot to carry out application attempts including sound signal detection, locomotion inside a turbofan engine and transportation via a quadrotor.

3D‐Printed Electrostatic Microactuators for Flexible Microsystems

AbstractDeveloping small‐scale, lightweight, and flexible devices with integrated microactuators is one of the critical challenges in wearable haptic devices, soft robotics, and microrobotics. In this study, a novel fabrication process that leverages the benefits of 3D printing with two‐photon polymerization and flexible printed circuit boards (FPCBs) is presented. This method enables flexible microsystems with 3D‐printed electrostatic microactuators, which are demonstrated in a flexible integrated micromirror array and a legged microrobot with a mass of 4 mg. 3D electrostatic actuators on FPCBs are robust enough to actuate the micromirrors while the device is deformed, and they are easily integrated with off‐the‐shelf electronics. The crawling robot is one of the lightest legged microrobots actuated without external fields, and the legs actuated with 3D electrostatic actuators enable a locomotion speed of 0.27 body length per second. The proposed fabrication framework opens up a pathway toward a variety of highly integrated flexible microsystems.

Effective locomotion at multiple stride frequencies using proprioceptive feedback on a legged microrobot

Limitations in actuation, sensing, and computation have forced small legged robots to rely on carefully tuned, mechanically mediated leg trajectories for effective locomotion. Recent advances in manufacturing, however, have enabled in such robots the ability for operation at multiple stride frequencies using multi-degree-of-freedom leg trajectories. Proprioceptive sensing and control is key to extending the capabilities of these robots to a broad range of operating conditions. In this work, we use concomitant sensing for piezoelectric actuation with a computationally efficient framework for estimation and control of leg trajectories on a quadrupedal microrobot. We demonstrate accurate position estimation (<16 root-mean-square error) and control (<16 root-mean-square tracking error) during locomotion across a wide range of stride frequencies (10 Hz–50 Hz). This capability enables the exploration of two bioinspired parametric leg trajectories designed to reduce leg slip and increase locomotion performance (e.g. speed, cost-of-transport (COT), etc). Using this approach, we demonstrate high performance locomotion at stride frequencies (10 Hz–30 Hz) where the robot’s natural dynamics result in poor open-loop locomotion. Furthermore, we validate the biological hypotheses that inspired the trajectories and identify regions of highly dynamic locomotion, low COT (3.33), and minimal leg slippage (<10%).

Modeling Legged Microrobot Locomotion Based on Contact Dynamics and Vibration in Multiple Modes and Axes

A dynamic model is developed for small-scale robots with multiple high-frequency actuated compliant elastic legs and a rigid body. The motion of the small-scale robots results from dual-direction motion of piezoelectric actuators attached to the legs, with impact dynamics increasing robot locomotion complexity. A dynamic model is developed to describe the small-scale robot motion in the presence of variable properties of the underlying terrain. The dynamic model is derived from beam theory with appropriate boundary and loading conditions and considers each robot leg as a continuous structure moving in two directions. Robot body motion is modeled in up to five degrees-of-freedom (DOF) using a rigid body approximation for the central robot chassis. Individual modes of the resulting multimode robot are treated as second-order linear systems. The dynamic model is tested with two different centimeter-scale robot prototypes having an analogous actuation scheme to millimeter-scale microrobots. In accounting for the interaction between the robot and ground, a dynamic model using the first two modes of each leg shows good agreement with experimental results for the centimeter-scale prototypes, in terms of both magnitude and the trends in robot locomotion with respect to actuation conditions.