Learning-based Convolutional Neural Network Research Articles

Deep learning-based automated measurement of hip key angles and auxiliary diagnosis of developmental dysplasia of the hip.

Anteroposterior pelvic radiographs remains the most widely employed method for diagnosing developmental dysplasia of the hip. This study aims to evaluate the accuracy of an artificial intelligence model in measuring angles in pelvic radiographs of the hip. The assessment seeks to demonstrate the efficacy of the artificial intelligence model in diagnosing both developmental dysplasia of the hip and borderline developmental dysplasia of the hip through the analysis of pelvic radiographs. A total of 1,029 patients, including 273 men and 757 women, were retrospectively included in this study. The anteroposterior pelvic radiographs were randomly divided into three sets: the training set (720 cases), the validation set (103 cases), and the test set (206 cases). Key anatomical points on the anteroposterior pelvic radiographs were identified. The Sharp, Tönnis, and Center Edge angles were calculated automatically based on the corresponding criteria. The hip development status was compared between measurements obtained from the artificial intelligence model and those defined manually by two radiologists. The area under the receiver operating characteristic curve was utilized to assess the diagnostic performance of the artificial intelligence model. The results obtained from both manual measurements and the artificial intelligence model demonstrated no significant differences in the Sharp, Tönnis, and Center edge angles (all p > 0.05). The intra-class correlation coefficients and correlation coefficient r values exceeded 0.75, indicating that both the artificial intelligence model and manual measurements exhibited good repeatability and a positive correlation. Notably, the artificial intelligence model provided measurements more faster than those conducted by radiologists (p = 0.001). The artificial intelligence model also demonstrated high diagnostic accuracy, sensitivity, and specificity for developmental dysplasia of the hip. The performance of the artificial intelligence model in diagnosing developmental dysplasia of the hip was robust. Additionally, the results from the artificial intelligence model and manual measurements were largely consistent with clinical diagnosis results (p = 0.01). The artificial intelligence model can effectively evaluate hip conditions by measuring the Sharp, Tönnis, and Center edge angles, which are consistent closely with clinical diagnosis results. The results of the artificial intelligence model measurements demonstrate a high degree of consistency with those obtained through manual measurements. The angles of Sharp, Tönnis, and Center edge, as evaluated by the deep learning-based convolutional neural network model, exhibit robust diagnostic performance in identifying both developmental dysplasia of the hip and borderline developmental dysplasia of the hip. Consequently, the artificial intelligence model has the potential to fully replace manual measurements of these critical hip angles, providing a more efficient and precise alternative for diagnosing both conditions of the hip.

Critically Reckoning Spectrophotometric Detection of Asymptomatic Cyanotoxins and Faecal Contamination in Periurban Agrarian Ecosystems via Convolutional Neural Networks

Based on a systematic review of convolutional neural networks (CNN), this study explores the efficacy of small imaging sensors in monitoring the real-time presence of cyanotoxins and hazardous contaminants in urban ecosystems. To develop a machine learning-based CNN, this study first investigated the relationships between the prevalence of hazardous algal blooms (HABs) and faecal indicator bacteria (FIB) in waterways and aquifers of certain semi-arid zones of Sri Lanka, Sweden and New York (United States). By incorporating a popularly known AbspectroscoPY framework to effectively process the spectrophotometric data of the obtained samples, the formulation subsequently reveals strong positive correlations between FIB coliforms and nutrient loads (particularly nitrate and phosphate). A corroborative association with the incidence of chronic kidney disease of uncertain aetiology (CKDu) among the residents of the studied regions further affirms the reliability of the methodology. These findings underline the need for policymakers to consider the geographical and land-use traits of urban habitats in strategies aimed at reducing water-borne health hazards. HIGHLIGHTS This study examines the link between hazardous algal blooms (HABs) and faecal indicator bacteria (FIB) in the semi-arid habitats of Sri Lanka, Sweden, and New York, USA. Quantitative Phase Imaging based on a convolutional neural network (CNN) model helps monitor cyanobacterial incursions in peri-urban agrarian ecosystems. AbspectroscoPY-enabled spectrophotometric data analysis reveals strong positive correlations between the prevalence of FIB coliforms and nutrient loads, particularly those of nitrates and phosphates. Reliability of proposed machine learning-based CNNs is validated by the corroborative incidences of chronic kidney diseases among residents of the studied regions. GRAPHICAL ABSTRACT

Content based COVID-19 image retrieval system using local histogram equalization and deep convolutional neural network

Doctors play a critical role in interpreting medical images as part of their core responsibilities. They need to find comparable examples that can assist in making informed decisions, especially when encountering ambiguous visuals. Traditionally, Systems such as content-based medical image retrieval (CBMIR) have been used for this. The proposed method employs a novel technique, local histogram equalization (LHE) for preprocessing, transfer learning-based convolutional neural network to extract the representative features with Manhattan and Euclidean distance metrics to assess how similar the query image and database image are to one another. This model is trained on a standard dataset namely Chest X-Ray images. Top-k, Precision and Recall measure is employed to assess system performance. From the results, the suggested enhanced convolutional neural network (CNN) model demonstrates significantly superior performance in the top 10 retrieval rates of 97.13% for coronavirus disease 2019 (COVID-19), 96.84% for normal, 82.63% for pneumonia-bacterial, and 81.72% for pneumonia-viral and precision@recall10 of 93.14% for COVID-19, 91.88% for normal, 77.84% for pneumonia-bacterial and 74.71% for pneumonia-viral.

Evaluation of transfer ensemble learning-based convolutional neural network models for the identification of chronic gingivitis from oral photographs

BackgroundTo evaluate the performances of several advanced deep convolutional neural network models (AlexNet, VGG, GoogLeNet, ResNet) based on ensemble learning for recognizing chronic gingivitis from screening oral images.MethodsA total of 683 intraoral clinical images acquired from 134 volunteers were used to construct the database and evaluate the models. Four deep ConvNet models were developed using ensemble learning and outperformed a single model. The performances of the different models were evaluated by comparing the accuracy and sensitivity for recognizing the existence of gingivitis from intraoral images.ResultsThe ResNet model achieved an area under the curve (AUC) value of 97%, while the AUC values for the GoogLeNet, AlexNet, and VGG models were 94%, 92%, and 89%, respectively. Although the ResNet and GoogLeNet models performed best in classifying gingivitis from images, the sensitivity outcomes were not significantly different among the ResNet, GoogLeNet, and Alexnet models (p>0.05). However, the sensitivity of the VGGNet model differed significantly from those of the other models (p < 0.001).ConclusionThe ResNet and GoogLeNet models show promise for identifying chronic gingivitis from images. These models can help doctors diagnose periodontal diseases efficiently or based on self-examination of the oral cavity by patients.

Genetically optimised SMOTE-based adversarial discriminative domain adaptation for rotor fault diagnosis at variable operating conditions

Abstract For safety, reliability, and uninterrupted output of gas turbines, aviation engines, power-generating equipment, pumps, gears, compressors etc., rotor mass imbalance must be detected and diagnosed to avoid catastrophic failure. Industry 4.0 relies on predictive digital maintenance and deep learning-based convolutional neural network (CNN), which predicts defects but fails if the operating conditions change. Research studies in various fields indicate that the domain shift issue occurs due to source and target samples being from different domains, which reduces prediction capability. Moreover, research studies are scarce in examining prediction capability under varying operating speeds for rotor mass imbalance. Hence, this research proposes the adversarial discriminative domain adaptation (ADDA) technique which predicts machine failures under various operational conditions. The efficacy of ADDA has been explored by introducing 1D-CNN as a source and a target encoder inside ADDA's architecture to take advantage of CNN's feature extraction capability. Further, this research effectively tackles CNN's inherent issues of overfitting and hyperparameters value selection. Furthermore, The real-world scenario has more healthy samples than fault condition samples, causing a multiclass imbalance in sample data, which affects the classification decision boundary and causes biased prediction. Hence, the proposed methodology first addresses the class imbalance through synthetic minority oversampling (SMOTE), then genetic algorithm optimizes 1D-CNN's hyperparameters, and the effective dropout layer positioning solves the overfitting. Finally, the deep learning-based SMOTE_ADDA_GO-1D-CNN decreases domain discrepancy with adversarial discriminative domain adaptation. The proposed methodology's efficacy has been explored through F1-Score, which is used as multiclass evaluation metrics, and it has been benchmarked against standard machine learning and deep learning algorithms. The test results of the proposed methodology surpassed all of them with maximum prediction accuracy. Thus, this study contributes to rotor mass imbalance detection and diagnosis for multiclass imbalanced data under varying operational conditions by successfully overcoming potential challenges during fault prediction.

Deep-modified transfer learning-based CNN networks for enhanced breast cancer prediction

Breast cancer (BC) is one of the most fatal forms of cancer, making it a significant contributor to mortality rates worldwide. Early detection and timely treatment of breast cancer are crucial in reducing its mortality rate. To ensure a healthy lifestyle, it is essential to develop systems that can accurately diagnose breast cancer. Recent advances in modern computing and information technologies have enabled significant progress in the early detection and prediction of diseases within healthcare systems. This study proposes a method for precise and automatic breast cancer prediction using deep-modified transfer learning-based Convolutional Neural Networks (CNNs). The CNN architectures employed include ResNet50, MobileNetV2, DenseNet121, and Xception, which serve as feature extractors to capture the most relevant features of breast Ultrasound images (BUSI). These extracted features are then accurately classified as benign or malignant using various high-performance classifiers, including Support Vector Machine (SVM), K-Nearest Neighbors (KNN), XGBoost, and Softmax. The experimental results demonstrate that the proposed deep modified DenseNet121 network with the Softmax classifier outperformed other models and existing techniques. This latter achieved remarkable performance metrics, including an accuracy of 95.34%, a precision of 90.90%, and an F1 score of 93.02%. These results highlight the effectiveness of our approach in enhancing the accuracy of breast cancer prediction. The superior performance of the proposed method provides significant improvements in decision-making speed and reduces the time, effort, and laboratory resources required for healthcare services. Consequently, this method has the potential to significantly enhance early diagnosis and enable more tailored treatment plans, ultimately contributing to better patient outcomes and reducing the overall mortality rates associated with breast cancer.

FPGA-enhanced system-on-chip for finger vein-based biometric system using novel DL model

In an era dominated by technology, the imperative for robust personal authentication in electronic information systems becomes increasingly evident. A secure and dependable solution to address this need is biometric authentication. Due to their intrinsic features of being universal, unique, and fraud-resistant, finger vein-based recognition systems have gained importance. Veins provide an efficient barrier against misleading methods since they are buried under the skin and undetectable to human sight. While many researchers focus on advanced technology for finger-vein-based authentication systems, existing research has often overlooked significant challenges, such as short datasets, high computational complexity, and a lack of efficient and lightweight feature descriptors. This paper proposes a unique method for automated Finger Vein Recognition (FVR) based on a fusion model known as “CNN-ViT” for FVR. Transfer learning-based Convolutional Neural Network (CNN) models, such as Inception-V3 and ResNet-50, compute the correlation of adjacent pixels to process texture-based features. Furthermore, shape-based features are processed using the vision transformer (ViT) model to determine the relationship between distant pixels. The combination of these three models enables the learning of textural features based on forms, contributing to more effective finger vein identification. In addition to our databases, we utilize two benchmark databases, FV-USM and SDUMLA-HMT, to validate our experiments. Our proposed approach achieves outstanding accuracy values of 99.95 %, 98.9 %, and 97.78 % on both the benchmark and our datasets. When compared to previous methods, the proposed Deep Learning (DL) model outperforms state-of-the-art models, demonstrating higher recognition rates and accuracy. To prototype the proposed FVR system, a Zynq XCZU4EV UltraScale + Multiprocessor System-On-Chip (MPSoC) was employed. The proposed model exhibits high throughput and competitive power efficiency, making it an excellent choice for scenarios where computing performance is critical, albeit utilizing more power and resources. This was established through a comprehensive examination of FPGA resource utilization and performance metrics.

Plant Disease Detection Using Deep Learning-Based Convolutional Neural Networks With Transfer Learning Algorithms

Plant diseases can have significant impacts on agricultural production, leading to significant losses in yield and quality. Early detection and diagnosis of crop diseases is essential for effective control and management. In this study, We present a novel approach for the automated detection of plant diseases using deep learning-based Convolutional Neural Networks (CNNs) coupled with Transfer Learning algorithms. Our study focuses on developing a robust and adaptable system capable of accurately identifying plant diseases from image data. By leveraging a comprehensive dataset comprising diverse plant species and disease types, our goal is to train the model to achieve high accuracy and real-time detection capabilities. The potential significance of this research lies in its potential to significantly improve agricultural practices by offering farmers a valuable tool for prompt disease diagnosis and management, ultimately leading to increased crop yields and sustainable farming practices. Keywords: CNN, Deep Learning, Plant Diseases detection, Disease Diagnosis, Agriculture.

A new ViT-Based augmentation framework for wafer map defect classification to enhance the resilience of semiconductor supply chains

Wafer map defect classification plays a crucial role in sustaining the semiconductor supply chain during industrial disruptions by ensuring continuity, resilience, and efficiency while aligning with sustainability principles. Up to 30 percent of production costs is lost to chip testing and yield losses for semiconductor manufacturing supply chain. In the semiconductor practice, wafer map defects recognition plays a linchpin role in the front-end-of-line stage. Defect pattern recognition can directly pinpoint the assignable causes and provide the domain experts with actionable insights. However, various wafer defect types occur differently from each other, which makes the collected wafer map dataset to be highly imbalanced in defect classes. In the face of data imbalance, the classification model usually cannot provide satisfactory classification performance. In this aspect, this paper intends to investigate the wafer defect map classification problem by using Vision Transformer (ViT) as an alternative data augmentation approach. The primary purpose is to alleviate the class-imbalance issue and then the performance of a deep learning-based convolutional neural network for wafer defect classification can be effectively improved. The experimental results demonstrate that the proposed data augmentation method by using ViT proves to be a potential generative model for improving wafer map defect classification, particularly robust on the individual minority class. In a word, the proposed augmentation framework for wafer map defect classification facilitates a more targeted and efficient approach to quality control, resource utilization, and production optimization in maintaining a sustainable semiconductor supply chain, particularly in times of industrial disruption.

Analyzing the Deep Learning-Based Mobile Environment in Educational Institutions

More efficient instructional models that encourage students to engage more actively in their education are essential in today’s world. How information can be found and exchanged, as well as how explanations are delivered, have been shaped by technology. The outcomes demonstrate that mobile learning (m-learning) has enhanced collaboration among instructors and learners, provided immediate feedback, increased student participation and engagement, allowed for authentic learning and evaluation, and supported learning communities in higher education institutions. There was also a change in the teachers’ instructional methods. Students will benefit from simple learning activities, convenient communication, and coaching provided through mobile devices. This study recommends using a learning-based convolutional neural network (CNN) technique to improve students’ English-speaking fluency. In addition, communication between teachers and children in remote areas becomes easier through an interactive system, making both sides more accessible. As a result, it is advisable that educational institutions continually develop innovative teaching techniques that bridge face-to-face and formal-informal learning in the educational setting. The article discusses the background of mobile learning and how it might enhance e-learning as a whole. The m-learning approach is described in this paper as a future version of e-learning. In comparison to the next generation of educational systems, it will be extensively offered and simple to operate for any individual interested in learning. The article also discusses the benefits and potential drawbacks of mobile learning in current educational institutions.

Multimodal radiotherapy dose prediction using a multi-task deep learning model.

In radiation therapy (RT), accelerated partial breast irradiation (APBI) has emerged as an increasingly preferred treatment modality over conventional whole breast irradiation due to its targeted dose delivery and shorter course of treatment. APBI can be delivered through various modalities including Cobalt-60-based systems and linear accelerators with C-arm, O-ring, or robotic arm design. Each modality possesses distinct features, such as beam energy or the degrees of freedom in treatment planning, which influence their respective dose distributions. These modality-specific considerations emphasize the need for a quantitative approach in determining the optimal dose delivery modality on a patient-specific basis. However, manually generating treatment plans for each modality across every patient is time-consuming and clinically impractical. We aim to develop an efficient and personalized approach for determining the optimal RT modality for APBI by training predictive models using two different deep learning-based convolutional neural networks. The baseline network performs a single-task (ST), predicting dose for a single modality. Our proposed multi-task (MT) network, which is capable of leveraging shared information among different tasks, can concurrently predict dose distributions for various RT modalities. Utilizing patient-specific input data, such as a patient's computed tomography (CT) scan and treatment protocol dosimetric goals, the MT model predicts patient-specific dose distributions across all trained modalities. These dose distributions provide patients and clinicians quantitative insights, facilitating informed and personalized modality comparison prior to treatment planning. The dataset, comprising 28 APBI patients and their 92 treatment plans, was partitioned into training, validation, and test subsets. Eight patients were dedicated to the test subset, leaving 68 treatment plans across 20 patients to divide between the training and validation subsets. ST models were trained for each modality, and one MT model was trained to predict doses for all modalities simultaneously. Model performance was evaluated across the test dataset in terms of Mean Absolute Percent Error (MAPE). We conducted statistical analysis of model performance using the two-tailed Wilcoxon signed-rank test. Training times for five ST models ranged from 255 to 430min per modality, totaling 1925min, while the MT model required 2384min. MT model prediction required an average of 1.82s per patient, compared to ST model predictions at 0.93s per modality. The MT model yielded MAPE of 1.1033±0.3627% as opposed to the collective MAPE of 1.2386±0.3872% from ST models, and the differences were statistically significant (p=0.0003, 95% confidence interval=[-0.0865, -0.0712]). Our study highlights the potential benefits of a MT learning framework in predicting RT dose distributions across various modalities without notable compromises. This MT architecture approach offers several advantages, such as flexibility, scalability, and streamlined model management, making it an appealing solution for clinical deployment. With such a MT model, patients can make more informed treatment decisions, physicians gain more quantitative insight for pre-treatment decision-making, and clinics can better optimize resource allocation. With our proposed goal array and MT framework, we aim to expand this work to a site-agnostic dose prediction model, enhancing its generalizability and applicability.

Construction of deep learning-based convolutional neural network model for automatic detection of fluid hysteroscopic endometrial micropolyps in infertile women with chronic endometritis

Objective(s)Chronic endometritis (CE) is a localized mucosal inflammatory disorder associated with female infertility of unknown etiology, endometriosis, tubal factors, repeated implantation failure, and recurrent pregnancy loss, along with atypical uterine bleeding and iron deficiency anemia. Diagnosis of CE has traditionally relied on endometrial biopsy and detection of CD138(+) endometrial stromal plasmacytes. To develop a less invasive diagnostic system for CE, we aimed to construct a deep learning-based convolutional neural network (CNN) model for the automatic detection of endometrial micropolyps (EMiP), a fluid hysteroscopy (F-HSC) finding recognized as tiny protrusive lesions that are closely related to this disease. Study designThis is an in silico study using archival images of F-HSC performed at an infertility center in a private clinic. A total of 244 infertile women undergoing F-HSC on the days 6–12 of the menstrual cycle between April 2019 and December 2021 with histopathologically-confirmed CE with the aid of immunohistochemistry for CD138 were utilized. ResultsThe archival F-HSC images of 208 women (78 with EMiP and 130 without EMiP) who met the inclusion criteria were finally subjected to analysis. Following preprocessing of the images, half a set was input into a CNN architecture for training, whereas the remaining images were utilized as the test set to evaluate the performance of the model, which was compared with that of the experienced gynecologists. The sensitivity, specificity, accuracy, precision, and F1-score of the CNN model-aided diagnosis were 93.6 %, 92.3 %, 92.8 %, 88.0 %, and 0.907, respectively. The area under the receiver operating characteristic curves of the CNN model-aided diagnosis (0.930) was at a similar level (p > .05) to the value of conventional diagnosis by three experienced gynecologists (0.927, 0.948, and 0.906). ConclusionThese findings indicate that our deep learning-based CNN is capable of recognizing EMiP in F-HSC images and holds promise for further development of the computer-aided diagnostic system for CE.

Deep learning-based CNN for multiclassification of ocular diseases using transfer learning

ABSTRACT Effective and timely diagnosis and treatment of ocular diseases is essential for swift recovery of the patients. Among ocular diseases, cataract and glaucoma are the most prevalent globally and need adequate attention. The present paper aims to develop an optimised deep learning based convolutional neural network (CNN) for the multi-classification of ocular diseases (normal, glaucoma and cataract). Three pre-trained CNNs (SqueezeNet, Darknet-53, EfficientNet-b0) were optimised concerning batch size (6/8/10) & optimiser type (SGDM, RMSProp, Adam) for obtaining maximum possible accuracy in the detection of multiple ocular diseases (cataract & glaucoma). Darknet-53 (batch size-6, optimiser type-Adam) gave the highest accuracy of 99.4% for a test sample of 1000 images. The performance metrics of Darknet-53 have been computed using a confusion matrix. Confusion matrix is also applied to calculate accuracy, sensitivity, specificity, f1 score and receiver operating curve (ROC). Through comparative performance analysis of the three CNNs, SqueezeNet, Darknet-53 and EfficientNet-b0 achieved the highest accuracy of 95%, 99.4% and 90%, respectively. The results indicate the importance of batch size and optimiser type on the performance of CNN models.

Land cover mapping of mixed classes using 2D CNN with multi-frequency SAR data

Synthetic aperture radar (SAR) data obtained at multiple frequencies and polarizations offers valuable complementary information for classifying mixed classes that exhibit similar backscattering response. Although deep learning-based convolutional neural networks (CNNs) effectively extract features from multi-frequency SAR data, the arbitrary ordering of SAR features may hinder optimal convolution of the best feature sub-space for a specific class and underutilize available multi-frequency data. To address this, a novel CNN transforming SAR feature-space from 1-D to 2-D and employing varied dilation-rate convolutions is introduced. This transformation maximizes unique and localized feature combinations, efficiently utilizing the available feature sub-spaces and extracting discriminative features for accurate classifications, addressing the challenge of arbitrary band neighborhoods. Utilizing dual-polarization SAR data from ALOS-2 PALSAR-2 and Sentinel-1 sensors, the proposed CNN achieves an average f-score of 0.97 and a kappa coefficient of 0.97, an improvement of 11 %, 7 % and 3 % in OA compared to the 1-D, 2-D and 3-D CNN classifiers, without feature transformation. The classifier's generalization ability is evaluated using ground truth knowledge of various heterogeneous classes, and the proposed CNN classifier outperforms others in terms of accuracy metrics and generalization ability.

SC-Track: a robust cell-tracking algorithm for generating accurate single-cell lineages from diverse cell segmentations.

Computational analysis of fluorescent timelapse microscopy images at the single-cell level is a powerful approach to study cellular changes that dictate important cell fate decisions. Core to this approach is the need to generate reliable cell segmentations and classifications necessary for accurate quantitative analysis. Deep learning-based convolutional neural networks (CNNs) have emerged as a promising solution to these challenges. However, current CNNs are prone to produce noisy cell segmentations and classifications, which is a significant barrier to constructing accurate single-cell lineages. To address this, we developed a novel algorithm called Single Cell Track (SC-Track), which employs a hierarchical probabilistic cache cascade model based on biological observations of cell division and movement dynamics. Our results show that SC-Track performs better than a panel of publicly available cell trackers on a diverse set of cell segmentation types. This cell-tracking performance was achieved without any parameter adjustments, making SC-Track an excellent generalized algorithm that can maintain robust cell-tracking performance in varying cell segmentation qualities, cell morphological appearances and imaging conditions. Furthermore, SC-Track is equipped with a cell class correction function to improve the accuracy of cell classifications in multiclass cell segmentation time series. These features together make SC-Track a robust cell-tracking algorithm that works well with noisy cell instance segmentation and classification predictions from CNNs to generate accurate single-cell lineages and classifications.

Multi-channel microseismic signals classification with convolutional neural networks

Identifying and classifying microseismic signals is essential to warn of mines’ dangers. Deep learning has replaced traditional methods, but labor-intensive manual identification and varying deep learning outcomes pose challenges. This paper proposes a transfer learning-based convolutional neural network (CNN) method called microseismic signals-convolutional neural network (MS-CNN) to automatically recognize and classify microseismic events and blasts. The model was instructed on a limited sample of data to obtain an optimal weight model for microseismic waveform recognition and classification. A comparative analysis was performed with an existing CNN model and classical image classification models such as AlexNet, GoogLeNet, and ResNet50. The outcomes demonstrate that the MS-CNN model achieved the best recognition and classification effect (99.6% accuracy) in the shortest time (0.31 s to identify 277 images in the test set). Thus, the MS-CNN model can efficiently recognize and classify microseismic events and blasts in practical engineering applications, improving the recognition timeliness of microseismic signals and further enhancing the accuracy of event classification.

Pattern Recognition in Embedded Systems for Event Occurrences

Abstract: PR (pattern recognition) typically includes interaction with humans and other complicated processes in the real world, embedded systems are ideal candidates. A typical PR application often considered the more perceptual branch of AI, responds to external events that the system detects through physical sensors or input devices by activating actuators or displaying relevant information. To explore the embedded recognition system and apply the deep learning algorithm to face detection, the deep learning-based Convolutional Neural Network (CNN)suggests two deep face detection methods. These are presented to use the deep learning algorithm.This was done to make it possible for us to use the deep learning algorithm for face detection. Because of this, to analyze the built-in face recognition system and applied the deep learning algorithm to the process of identifying faces. In addition, to do both things simultaneously. OMTCNN's training accuracy is 85.14%, higher than the unimproved algorithm. Accuracy of the recognition and calculation acceleration modules boosts embedded system face detection and identification performance. Embedded deep learning recognition is helpful.

Auto-segmentation of Adult-Type Diffuse Gliomas: Comparison of Transfer Learning-Based Convolutional Neural Network Model vs. Radiologists

Segmentation of glioma is crucial for quantitative brain tumor assessment, to guide therapeutic research and clinical management, but very time-consuming. Fully automated tools for the segmentation of multi-sequence MRI are needed. We developed and pretrained a deep learning (DL) model using publicly available datasets A (n = 210) and B (n = 369) containing FLAIR, T2WI, and contrast-enhanced (CE)-T1WI. This was then fine-tuned with our institutional dataset (n = 197) containing ADC, T2WI, and CE-T1WI, manually annotated by radiologists, and split into training (n = 100) and testing (n = 97) sets. The Dice similarity coefficient (DSC) was used to compare model outputs and manual labels. A third independent radiologist assessed segmentation quality on a semi-quantitative 5-scale score. Differences in DSC between new and recurrent gliomas, and between uni or multifocal gliomas were analyzed using the Mann–Whitney test. Semi-quantitative analyses were compared using the chi-square test. We found that there was good agreement between segmentations from the fine-tuned DL model and ground truth manual segmentations (median DSC: 0.729, std-dev: 0.134). DSC was higher for newly diagnosed (0.807) than recurrent (0.698) (p < 0.001), and higher for unifocal (0.747) than multi-focal (0.613) cases (p = 0.001). Semi-quantitative scores of DL and manual segmentation were not significantly different (mean: 3.567 vs. 3.639; 93.8% vs. 97.9% scoring ≥ 3, p = 0.107). In conclusion, the proposed transfer learning DL performed similarly to human radiologists in glioma segmentation on both structural and ADC sequences. Further improvement in segmenting challenging postoperative and multifocal glioma cases is needed.

Identifying optical microscope images of CVD-grown two-dimensional MoS2 by convolutional neural networks and transfer learning.

In Complementary Metal-Oxide Semiconductor (CMOS) technology, scaling down has been a key strategy to improve chip performance and reduce power losses. However, challenges such as sub-threshold leakage and gate leakage, resulting from short-channel effects, contribute to an increase in distributed static power. Two-dimensional transition metal dichalcogenides (2D TMDs) emerge as potential solutions, serving as channel materials with steep sub-threshold swings and lower power consumption. However, the production and development of these 2-dimensional materials require some time-consuming tasks. In order to employ them in different fields, including chip technology, it is crucial to ensure that their production meets the required standards of quality and uniformity; in this context, deep learning techniques show significant potential. This research introduces a transfer learning-based deep convolutional neural network (CNN) to classify chemical vapor deposition (CVD) grown molybdenum disulfide (MoS2) flakes based on their uniformity or the occurrence of defects affecting electronic properties. Acquiring and labeling a sufficient number of microscope images for CNN training may not be realistic. To address this challenge, artificial images were generated using Fresnel equations to pre-train the CNN. Subsequently, accuracy was improved through fine-tuning with a limited set of real images. The proposed transfer learning-based CNN method significantly improved all measurement metrics with respect to the ordinary CNNs. The initial CNN, trained with limited data and without transfer learning, achieved 68% average accuracy for binary classification. Through transfer learning and artificial images, the same CNN achieved 85% average accuracy, demonstrating an average increase of approximately 17%. While this study specifically focuses on MoS2 structures, the same methodology can be extended to other 2-dimensional materials by simply incorporating their specific parameters when generating artificial images.

Classification of Progressive Wear on a Multi-Directional Pin-on-Disc Tribometer Simulating Conditions in Human Joints-UHMWPE against CoCrMo Using Acoustic Emission and Machine Learning

Human joint prostheses experience wear failure due to the complex interactions between Ultra-High-Molecular-Weight Polyethylene (UHMWPE) and Cobalt-Chromium-Molybdenum (CoCrMo). This study uses the wear classification to investigate the gradual and progressive abrasive wear mechanisms in UHMWPE. Pin-on-disc tests were conducted under simulated in vivo conditions, monitoring wear using Acoustic Emission (AE). Two Machine Learning (ML) frameworks were employed for wear classification: manual feature extraction with ML classifiers and a contrastive learning-based Convolutional Neural Network (CNN) with ML classifiers. The CNN-based feature extraction approach achieved superior classification performance (94% to 96%) compared to manual feature extraction (81% to 89%). The ML techniques enable accurate wear classification, aiding in understanding surface states and early failure detection. Real-time monitoring using AE sensors shows promise for interventions and improving prosthetic joint design.