Metal Leaching Research Articles

Significant enhancement of piezoelectric photocatalytic activity in Mn-doped BiFeO3

Ultrasonic vibration and light irradiation can be used together to slow down the rapid recombination of light-induced charges during the catalytic process. One way to enhance the catalytic performance is by introducing different elements into the structure. In this study, pure bismuth ferrite (BiFeO3) and manganese (Mn)-doped bismuth ferrite (BFMO) nanomaterials were successfully synthesized by electrostatic spinning. These materials were then tested for their ability to degrade rhodamine B (RhB). The best-performing material was BiFe0.85Mn0.15O3, which achieved almost complete removal of RhB within 100 min. The degradation rate of this material was 3.3 times higher than that of pristine BiFeO3. This enhanced catalytic activity can be attributed to the wider range of light absorption and the synergistic enhancement of the piezoelectric response, which promotes the movement of free carriers. In addition, the synthesized catalysts have good stability and reusability, with little metal leaching after multiple uses. Free radical scavenging experiments tests showed that ·OH and holes are the main active species in the catalytic process. This work paves a new approach for creating highly efficient piezoelectric catalysts and expands the application of BiFeO3-based materials for wastewater purification.

Reduction of precious metal ions in aqueous solutions by contact-electro-catalysis

Precious metals are core assets for the development of modern technologies in various fields. Their scarcity poses the question of their cost, life cycle and reuse. Recently, an emerging catalysis employing contact-electrification (CE) at water-solid interfaces to drive redox reaction, called contact-electro-catalysis (CEC), has been used to develop metal free mechano-catalytic methods to efficiently degrade refractory organic compounds, produce hydrogen peroxide, or leach metals from spent Li-Ion batteries. Here, we show ultrasonic CEC can successfully drive the reduction of Ag(ac), Rh3+, [PtCl4]2-, Ag+, Hg2+, Pd2+, [AuCl4]-, and Ir3+, in both anaerobic and aerobic conditions. The effect of oxygen on the reaction is studied by electron paramagnetic resonance (EPR) spectroscopy and ab-initio simulation. Combining measurements of charge transfers during water-solid CE, EPR spectroscopy and gold extraction experiments help show the link between CE and CEC. What’s more, this method based on water-solid CE is capable of extracting gold from synthetic solutions with concentrations ranging from as low as 0.196 ppm up to 196 ppm, reaching in 3 h extraction capacities ranging from 0.756 to 722.5 mg g−1 in 3 h. Finally, we showed CEC is employed to design a metal-free, selective, and recyclable catalytic gold extraction methods from e-waste aqueous leachates.

Peroxymonosulfate activation by superparamagnetic mixed-valent Cu/N-(L-cysteine)-O-(carboxymethyl)chitosan/cobalt ferrate-rice hull hybrid nanocomposite for efficient degradation of naproxen: Synergetic adsorption-catalysis, kinetics, pathway, and relevant mechanism

Naproxen (NPX) as an emerging anthropogenic contaminant was detected in many water sources, which can pose a serious threat to the environment and human health. Peroxymonosulfate (PMS) decomposed by Cu(I) has been considered an effective activation method to produce reactive species. However, this decontamination process is restricted by the slow transformation of Cu(II)/Cu(I) by PMS. Herein, new N-(L-cysteine/triazine)-O-(carboxymethyl)-chitosan/cobalt ferrate-rice hull hybrid biocomposite was constructed to anchor the mixed-valent Cu(I)-Cu (II) (CuI, II-CCCF) for removing pharmaceutical pollutants (i.e., naproxen, ciprofloxacin, tetracycline, levofloxacin, and paracetamol). The structural, morphological, and catalytic properties of the CuI,II-CCCF have been fully identified by a series of physicochemical characterizations. Results demonstrated that the multifunctional, hydrophilic character, and negative ζ-potential of the activator, accelerating the redox cycle of Cu(II)/Cu(I) with hydroxyl amine (HA). The negligible metal leaching, well-balanced thermodynamic-kinetic properties, and efficient adsorption-catalysis synergy are the main reasons for the significantly enhanced catalytic performance of CuI,II-CCCF in the removal of NPX (98.6 % at 7.0 min). The main active species in the catalytic degradation of NPX were identified (●OH > SO4●− > 1O2 > > O2●−) and consequently suggested a degradation path. It can be noted that these types of carbohydrate-based nanocomposite offer numerous advantages, encompassing simple preparation, excellent decontamination capabilities, and long-term stability.

A Fe(III)-driven strategy for efficient closed-loop recovery of critical metals from spent LiNixCoyMnzO2 powder

With the concepts of carbon peaking and carbon neutrality taking hold, the demand for recycling of spent lithium-ion batteries (LIBs) is increasing rapidly. However, current recycling methods are mostly faced with the dilemma of high cost and low efficiency and unable to meet the demand for energy conservation and consumption reduction. Here, inspired by the formation of acid mine drainage (AMD), we propose a Fe(III)-driven recovery approach, in which the leaching of valuable metals is enhanced by the addition of solid reagents Fe2(SO4)3 and pyrite (FeS2) to create an acidic reducing atmosphere. Under optimal conditions, the leaching efficiency of Ni/Co/Mn/Li reached 99.9%. In addition, NH3·H2O-NaOH was employed to adjust the pH of the leachate for stepwise precipitation of Fe and Ni/Co/Mn. Li was finally collected as Li2CO3 and Fe(III) could be recycled. We have also made attempts on Ni/Co/Mn co-precipitation and Li2CO3 resynthesis of regenerated LiNixCoyMnzO2 (NCM). It is predicted that this process can provide a green, efficient and economical closed-loop approach for cathode recovery of LIBs, with far-reaching implications for the entire battery recycling industry.

Preparation and characterization of cementitious materials from dedioxinized and dechlorinated municipal solid waste incineration fly ash and blast furnace slag

To address the resource utilization issue of MSWI fly ash, a method has been proposed to prepare cementitious materials using harmlessly processed MSWI fly ash (HPFA). After washing and thermal treatment, The physicochemical properties of HPFA were characterized using QXRD, ICP, XRF, and GC-MS. Cementitious materials were prepared using HPFA, gypsum and blast furnace slag (BFS) as raw materials, Through XRD, TG, FTIR, TEM, and SEM-EDS methods, the hydration and hardening characteristics were investigated, and the leaching of heavy metals from solidified materials in simulated surface water and landfill environments was evaluated using ICP-MS. The results indicate that the harmless treatment can effectively reduce the chloride content and dioxins in MSWI FA but still contains heavy metals. The addition of HPFA (10%-50%) can enhance the compressive strength of cementitious materials, accelerate the exothermic process of cement hydration, and increase the total heat release of hydration, implying an improvement in the degree of hydration of the system.HPFA could effectively promote the hydration of gypsum and BFS, resulting in the higher formation of ettringite and C-(A)-S-H（C/S=1，Al/Si=0.3）.The formation of C(Mg/Fe)-(A)-S-H suggests that the Fe-Mg solid solution phase in HPFA may have participated in the hydration reaction. The increased stability of highly cross-linked (Q4) silicate tetrahedral structure with time implies that the material may have good durability. The leaching amount of heavy metals met the standards of Class I surface water in GB3838–2002 and GB5085.3–2007 which implies that the material has environmental safety. This study innovatively provides a preparation path for harmless MSWI fly ash and cementitious material ratios, reveals the hydration mechanism of HPFA in cementitious materials, evaluates the solidification ability of heavy metals, and provides important ideas for the resource utilization of MSWI fly ash.

Organic-inorganic hybrid interfaces with π-d electron coupling for preventing metal and sulfur leaching toward enhanced oxygen evolution reaction

Transition metal sulfides (TMSs) catalysts with high catalytic oxygen evolution reaction (OER) activity have been extensively studied, especially Fe and Co-based sulfides. Fe and Co active sites with a strong synergistic effect, which can adjust the electron density distribution and effectively improve the electrocatalytic OER activity. However, TMSs have poor stability in alkaline environment caused by metal ions and sulfur elements are facilitated to dissolve. In this work, TMSs was modified by polyaniline (PANI) to inhibit the precipitation of iron, cobalt, and sulfur elements and enhance its stability under alkaline conditions. Moreover, π-d structure can also be formed by the coating of PANI, which can further adjust its own electronic structure on the basis of stabilizing the TMSs structure, so as to improve the electrochemical performance, rendering them to stably operate at harsh environment for more than 90 h. These findings offer new guidance for improving the electrocatalytic stability of TMSs.

Evaluation of asphalt film thickness and heavy metal leaching of oxidizing slag used as an aggregate material in dense-graded asphalt concrete.

Electric-arc-furnace (EAF) steelmaking uses scrap iron and steel as raw materials. Scrap iron and steel originate from complex sources and may contain heavy metal components which can leach into the environment over time due to wear-and-tear. A by-product of the EAF steelmaking process is oxidizing slag, and approximately 1.2 million metric tons is produced every year in Taiwan alone. This study investigated substitution of natural aggregates with oxidizing slag in dense-graded asphalt concrete. We evaluated the water resistance and asphalt film thickness of the oxidizing slag substituted asphalt concrete and further explored the performance of oxidizing slag as paving material. We determined the dissolved and total amounts of heavy metals in the oxidizing slag, comparing these results with current regulatory controls to assess the environmental compatibility of the oxidizing slag. We found that due to the complicated sources of oxidizing slag, the basic properties should be analyzed on a batch-to-batch basis. Furthermore, we recommend trial mixing before upscaling the production of oxidizing slag substituted dense-graded asphalt concrete to confirm the mixing time required to achieve uniformity. The results also show that in comparison to natural aggregates used in asphalt concrete, oxidizing slag exhibits superior performance in terms of increased asphalt film thickness and improved water resistance. Furthermore, oxidizing slag as an aggregate material was associated with decreased heavy metal leaching and reduced environmental pollution. The results of the toxicity characteristic leaching procedure (TCLP) met regulatory requirements. However, the microwave-assisted aqua-regia digestion procedure showed heavy metal concentrations exceeding the monitoring standards for food crops. Considering environmental compatibility, it is recommended that controlling the total amount of heavy metals in oxidizing slag should be included in regulatory requirements. Furthermore, we should prohibit the use of materials such as oxidizing slag and other steel furnace slag in the roadways adjacent to edible crop farmlands.

Sewage sludge biochar as a sustainable and water-safe substrate additive for extensive green roofs

Article describes the application of nutrient-rich sewage sludge (SS) biochar as an innovative additive to extensive green roof substrate at application rates of 10 (SB10) and 20% (v/v) (SB20) and its long-term impact on discharge quality. In addition to a routine analysis of pH, EC, TSS, and COD in the discharge, concentrations of nutrients (total nitrogen and total phosphorus) and metals (Cd, Cu, Fe, Mn, Pb, and Zn) were used to monitor leaching from the experimental green plots. SS biochar improves the water-holding capacity and air-filled porosity of the developed substrates SB10 and SB20, where the chemical and physical parameters meet the minimum requirements for multi-layer extensive roof substrate. The addition of biochar didn't substantially increase the concentrations of nutrients in discharge compared to the conventional extensive substrate, even after 30 months. Results suggested that biochar tends to release nutrients gradually when leached out by rain and may therefore serve as a source of P and other micronutrients. Although an increase in the concentrations of metals (Cu, Pb, and Zn) in the SB10 and SB20 substrates was observed, no significant differences in metal leaching were found. Metal concentrations in the aboveground parts of Sedum plants indicated that the pyrolysis of SS transforms water-extractable forms of metals into stable forms, thereby significantly reducing their bioavailability to Sedum species and any direct ecotoxicological risk. Based on our results, we assert that SS biochar could be used as a sustainable, valuable and water-safe component of extensive substrates for green roofs.

Reactive layered hydroxide membrane for advanced water treatment: Micropollutant degradation and antifouling potential

The effective removal of micropollutants by water treatment technologies remains a significant challenge. Herein, we develop a CoFe layered double hydroxide (CoFeLDH) catalytic membrane for peroxymonosulfate (PMS) activation to achieve efficient micropollutant removal with improved mass transfer rate and reaction kinetics. This study found that the CoFeLDH membrane/PMS system achieved an impressive above 98% degradation of the probe chemical ranitidine at 0.1 mM of PMS including five more micropollutants (Sulfamethoxazole, Ciprofloxacin, Carbamazepine, Acetaminophen and Bisphenol A) at satisfactory level (above 80%). Moreover, significant improvements in water flux and antifouling properties were observed, marking the membrane as a specific advancement in the removal of membrane fouling in water purification technology. The membrane demonstrated consistent degradation efficiency for several micropollutants and across a range of pH (4–9) as well as different anionic environments, thereby showing it suitability for scale-up application. The key role of reactive species such as SO4•–, and O2• − radicals in the degradation process was elucidated. This is followed by the confirmation of the occurrence of redox cycling between Co and Fe, and the presence of CoOH+ that promotes PMS activation. Over the ten cycles, the membrane could be operated with a flux recovery of up to 99.8% and maintained efficient performance over 24 h continuous operation. Finally, the efficiency in degrading micropollutants, coupled with reduced metal leaching, makes the CoFeLDH membrane as a promising technology for application in water treatment.

Peracetic acid-induced nanoengineering of Fe-based metallic glass ribbon in application of efficient drinking water treatment

This study presents a novel approach utilizing Fe-Si-B metallic glass-based advanced oxidation processes (AOPs) with peracetic acid (PAA) exposure to mitigate disinfection by-products (DBPs) formation in drinking water treatment. Under optimal conditions, it achieved a 98.21% removal of natural organic matter (NOM) and an 80.64% reduction in DBPs formation. The efficacy is attributed to the galvanic cell effect induced by nanoflower structures on the ribbon surface, produced via PAA exposure, thereby enhancing degradation efficiency. High-valent iron Fe(IV) was identified as the primary reactive species, showing robust cycling efficiency under near-neutral conditions. Continuous flow experiments and toxicity assessments using luminescent bacteria further validated the method, demonstrating minimal metal leaching (<0.146 mg/L) and reduced biotoxicity with a 37.68% inhibition rate decrease in 24 h. These findings underscore the promising potential of PAA-integrated Fe-based amorphous alloys for comprehensive water disinfection and purification.

Sustainable Application of Pyrolytic Oxygen Furnace Slag in Cement-Stabilized Macadam: Volume Stability, Mechanical Properties, and Environmental Impact

As an industrial waste, basic oxygen furnace (BOF) slag is an ideal substitute for natural rubble and sand. However, its potential instability of volume restricts the application of the BOF slag in engineering. This study aims at investigating the volume stability and mechanical properties of BOF slag and its application as an aggregate in cement-stabilized macadam. As part of this research, the physicochemical properties, especially the volume stability, of two types of BOF slags and andesite were first studied. Then, mechanical properties, volume stability, and an environment analysis are used to evaluate the application of pyrolytic BOF slag in cement-stabilized macadam. The experimental results show that different types of BOF slags have similar thermal expansion coefficients, which are higher than andesite. The free CaO content of pyrolytic BOF slag is much lower than that of ordinary BOF slag and the volume expansion of pyrolytic BOF slag is less than 0.5%. The unconfined compressive strength (UCS) of cement-stabilized macadam using pyrolytic BOF slag is about 30% higher than that of andesite. Although the water loss rate is higher than a natural aggregate, dry shrinkage of pyrolytic BOF slag cement-stabilized macadam is about 30–50% less than that of a natural aggregate. Meanwhile, its shrinking speed is also slower than that of a natural aggregate. The micro-expansion properties of pyrolytic BOF slag could effectively partially offset the shrinkage characteristics of cement-stabilized macadam. Finally, the Toxicity Characteristic Leaching Procedure (TCLP) test results indicated that the metal leaching concentration meets the Chinese environmental standards. This study provides a direction for the large-scale and effective sustainable application of pyrolytic BOF slag.

Immobilization properties and reaction mechanism of municipal solid waste incineration fly ash with alkali activation technology

Municipal solid waste incineration fly ash (MSWIFA) needs proper treatment prior to security landfilling because of considerable amounts of heavy metals and soluble chloride. Nowadays, alkali activation technology has become an effective solidification/stabilization (S/S) technology for MSWIFA. But few studies have been systematically carried out on the preparation techniques and reaction mechanism of MSWIFA S/S body. The effects of the technical parameters (alkali activator, sodium silicate modulus, alkali equivalent, water-solid ratio, curing regime) on the immobilization properties (compressive strength and heavy metal leaching toxicity) of MSWIFA S/S bodies were studied in this work. The hydration characteristics and reaction mechanism were also explored in depth based on the structure properties and microstructure characterization. Ca2+, Na+, SiO42−, [Al(OH)4]-, OH− dissociated from MSWIFA and alkali activator solution chemical reaction to form the silicates, aluminates and aluminosilicates with lower polymerization, and promoted the gel hydration products formation via depolycondensation. Lower Ca/Si molar ratio was conductive to the formation of amorphous substance, compactness of matrix pore structure and immobilization properties. Compared to the hydration products including halite, sylvine, glauberite, gypsum, calcite crystal, C–S–H gel contributed much more to the pore structure and strength improvement of MSWIFA S/S bodies. These findings will provide valuable theoretical basis for MSWIFA management and resource utilization promotion.

Mesoporous silica encapsulated core-shell NiRh@NiO nanocatalyst for performance-enhanced ethanol steam reforming

A novel mesoporous SiO2 encapsulated core-shell NiRh@NiO nanostructure was constructed to enhance the activity and stability of ethanol steam reforming (ESR). At 550 °C and ethanol-WHSV = 21 h−1, the specific activity and conversion loss (17 h) of NiRh@NiO@m-SiO2 were 0.42 molethanol/(gcat.·h) and 10.9 %. The alloying of NiRh core, dominated NiO in shell, and abundant mesopore of SiO2 were confirmed by systematic characterization techniques. The in situ DRIFTS results indicated that alloying Ni and Rh boosted ethoxide dehydrogenation to acetaldehyde and acetate demethanation to carbonate. ReaxFF molecular dynamics (MD) simulations suggested that NiO shell was conducive to water activation, which, in turn, promoted the conversion of CHxOy species. The SiO2 encapsulation derived confinement effect inhibited both metal core sintering and leaching caused by the filamentous carbon. The abundant mesopores of SiO2 ensured the facile in-diffusion of water and out-diffusion of carbonaceous products, suppressing carbon deposition within the SiO2 encapsulation and the destruction of core-shell structure.

Solidification and Release Characteristics of Heavy Metals in Gypsum from Coal-Fired Power Plants

Heavy metals in flue gas desulfurization (FGD) gypsum from coal-fired power plants are at risk of releaching during the processes of stockpiling and resource utilization. In this study, the effects of organosulfur chelators dithiocarbamate (DTC) and trisodium trithiocyanate-15 (TMT-15) on the solidification characteristics of heavy metals in desulphurized gypsum under different mass fractions, pH values, water contents and reaction times were investigated. The chemical composition and morphology were analyzed by inductively coupled plasma atomic emission spectrometer (ICP-AES) and scanning electron microscope (SEM). The experiments showed that both DTC and TMT-15 were effective at stabilizing the heavy metals in the FGD gypsum, with more than a 50% curing effect for all the heavy metals except Pb. DTC showed a better stabilization for Pb, Hg, Cu, Zn, and Cr, and TMT-15 showed a better curing effect for Cd. The solidified gypsum had good heavy metal stability in low-water-content environments. Increasing the mass fraction, reaction time, and pH decreased the heavy metal leaching, and the mass fraction had the greatest effect on the total heavy metal leaching concentration, followed by the reaction time and pH value.

Extracellular synthesis of heteroatom doped copper oxide nanoparticles from electronic waste – Transforming waste to resource for the remediation of nitrophenol contaminated water

Industrial effluents containing hazardous phenolic compounds such as 4-nitrophenol (4-NP) can threaten aquatic ecosystems and the environment. To address the environmental issues due to nitrophenol-contaminated industrial effluents and rapidly generating electronic waste (e-waste), catalytic nanoparticles are biosynthesized utilizing the waste printed circuit boards (WPCBs) and the cell-free supernatant (CFS) of the bacteria Alcaligenes aquatilis for the catalytic reduction of 4-NP with sodium borohydride (NaBH4). The optimum synthesis parameters to maximize 4-NP reduction were an initial pH of 12.4 and a volume ratio of metal leachate to CFS of 1:3. These nanoparticles were found to be heteroatom-doped CuO/Cu2O (Bio-CuO/Cu2O-PCB) with spherical shape, average crystallite size of 19 nm and average particle size of 19.2 nm. The biosynthesized nanoparticles exhibited excellent catalytic activity in the reduction of 4-NP with a pseudo-first-order rate constant (kapp) of 0.526 min-1, induction period of 2 min, and 90% reduction of 4-NP in 6 min. This work demonstrates the recovery of metal resources from waste as nanoparticles with excellent catalytic activity using a green, eco-friendly synthesis method under ambient conditions. Bio-CuO/Cu2O-PCB showed better activity than commercial CuO, biosynthesized and chemically synthesized CuO using precursor salt. The developed synthesis method is eco-friendly and could yield a recyclable catalyst for reducing harmful aromatic pollutants such as 4-NP present in wastewater to 4-aminophenol, a pharmaceutical intermediate.

Single walled carbon nanotubes covalently functionalized by a ruthenium complex for photocatalytic oxidations

The covalent bonding of a ruthenium bipyridine complex derivative with the aromatic network of single walled carbon nanotubes (SWNT) through a stepwise protocol is presented, thus yielding the sample SWNT-Ru. To do that, an-amino decorated phenanthroline is bonded to the nanotube by means of the diazonium chemistry protocol, providing anchoring points for discrete organometallic units as depicted by the solid characterization techniques employed. The hybrid material, able to emit upon excitation, is active in the visible light-driven photocatalytic oxidation of organic sulfides to sulfoxides. SWNT-Ru presents a wide scope being able to convert more than 10 substrates with different characteristics, including added-value chemicals, with a stable performance over more than 6 cycles without metal leaching and enhanced activity compared to related homogeneous complexes. A versatile character is also demonstrated since this hybrid catalyst follows both possible photooxidation mechanisms.

Effect analysis on recycling of cathode material from spent ternary lithium-ion batteries via supercritical water oxidation and acid-leaching

This study proposed a recycling method for spent batteries by combining supercritical water oxidation and acid-leaching. In supercritical water oxidation process, the cathode material was separated from the electrode plate, and 98% of lithium in the cathode was leached to achieve the separation of lithium from Ni, Co and Mn. Ni, Co and Mn were then leached during the acid leaching process. The effect of solid-liquid ratio, oxidant mass concentration, reaction time and temperature in supercritical process on metal leaching was analyzed. The leaching rate of Ni, Co and Mn was improved by increasing the mass concentration of oxidant and the reaction temperature. The effect of reaction time on metal leaching is related to the mass concentration of oxidant in the solution. Through the control of paraments, the leaching efficiencies of Ni, Co and Mn were significantly improved from 90.4%, 84.7%, 86.4–99.7%, 96.8% and 98.5%.

Synthesis of PbOx to graphite felt anodes to improve the electro-assisted catalytic wet air oxidation of oxygen species for efficient dye degradation

Electro-assisted catalytic wet air oxidation (ECWAO) is an environmentally-friendly pollutant removal process with energy-saving and mild reaction properties. However, it requires an electrode with high catalytic capacity and stability, and the catalytic mechanism behind the process still needs to be further clarified. Herein, we report a graphite felt (GF)-supported PbOx catalyst which can chemically adsorb oxygen and activate it into free radicals by an anodic electric field to promote wet air oxidation. XRD, SEM, EDS, XPS, BET and TG measurements indicated that PbO and PbO2 were successfully doped and loaded onto the GF, increasing the specific surface area and number of active sites. The best RhB degradation efficiencies achieved were 91.26 % over 15 min and 96.68 % over 90 min. The PbOx@C/GF maintained good catalytic performance over eight cycles in the pH range of 3–11 with negligible metal leaching. The RhB degradation pathway of RhB was analyzed through GC–MS results. A free radical quenching experiment, a contrast experiment, and an electrochemical test revealed the process of oxygen being adsorbed by Pb(II) and activated to degrade organic matter was revealed. Five kinds of dyes were degraded by the electrode via the ECWAO process, and the degradation rate reached over 93.7 % within 90 min. The degradation specific energy consumption (SEC) of probe pollutant RhB is 48.70 kW·h/kg-COD. The industrial practical dye wastewater COD removal rate was close to 100 %, and the SEC was 24.44 kW·h/kg-COD. Therefore, it can be concluded that a graphite felt (GF)-supported PbOx catalyst can act as an anode for ECWAO to chemically adsorb oxygen and activate it into free radicals using an anodic electric field to promote wet air oxidation.

Mineral-derived layered carbon-based catalysts for enhanced Fenton-like reactions and catalytic ceramic membrane systems: Si-O coordination mediates radical generation and electron transfer

Taking advantage of the silica-rich layered structure of montmorillonite (MT), carbon-based catalysts are expected to efficiently activate peroxymonosulfate (PMS), avoiding the instability and metal leaching problems of metal catalysts. This study developed innovative metal-free catalysts (10 N/C@Si) with Si-O coordination derived from the naturally abundant MT, which was different from the conventional methods of using them as carriers or ion doping. The fabricated 10 N/C@Si catalysts with a large specific surface (368.7 m2/g) area exhibited a significant catalytic oxidation ability for tetracycline (kobs = 0.401 min -1). The degradation mechanism included enhanced radical and electron transfer. The Si-O coordination can lead to the cleavage of adsorbed PMS, accelerating the generation of radicals, and can also serve as a bridge for the transfer of electrons from tetracycline to the 10 N/C@Si/PMS complexes, as proved by density-functional theory (DFT) computations. Additionally, loading of 10 N/C@Si on ceramic membranes (CM) achieved an extraordinarily large water flux of 505.0 L·m−2·h−1 and showed full oxidation of tetracycline, which simultaneously allowed efficient in-situ degradation and one-step solid–liquid separation.

Toxic heavy metals in a landfill environment (Vientiane, Laos): Fish species and associated health risk assessment

Leachates from municipal landfills introduce toxic heavy metals into water, causing bioaccumulation. This study assesses metal levels and potential human health risks associated with consuming Anabas testudineus and Channa striata. Inductively coupled plasma mass spectrometry detected Cd, Cu, Cr, Ni, Pb, and Zn in both fish species. Leachate metal concentrations meet international discharge standards, Cd, Cr, and Pb in the fish exceed the international accepted values. Gastrointestinal tract+liver samples show significant variation between species, particularly in Cd and Pb. EDI, THQ/HI, and TR for the both species fall below TDIs, lower than the limit of 1, and within the acceptable range of the US-EPA permissible limit, respectively. Fish consumption appears safe regarding carcinogenic risk, but exceeding metal limits could impact heavy metals accumulation in the local food chain. Raising public awareness is crucial, and governmental agencies and environmental organizations should enhance waste treatment technologies and enact relevant health legislation.