Number Of Graphene Layers Research Articles

SsDNA Capture Dynamics by Graphene Nanopores: The Role of Electrophoresis and Electro-osmotic Flow.

Efficient capture of single-stranded DNA (ssDNA) is crucial for high-throughput sequencing, which influences the speed and accuracy of genetic analysis. Electrophoresis (EP) and electro-osmotic flow (EOF) have a significant impact on the translocation behavior of ssDNA through the nanopore. Experimentally, dynamically tracking these two effects remains challenging, and conventional numerical methods also struggle to capture their dynamic properties in the presence of DNA. We use all-atom molecular dynamics (MD) simulations to study how do EP and EOF play a role in the capture of DNA under different surface charge densities and graphene layer numbers. Our findings indicate that positive surface charge densities work together with electrophoretic forces (FEP) to enhance the EOF, resulting in rapid and efficient ssDNA capture with improved rates of up to 88% and reduced capture times. Electro-osmotic force (FEOF) substantially enhances capture efficiency by not only lowering the energy barrier for ssDNA translocation through the nanopore but also increasing the probability of ssDNA locating and aligning with the pore entrance. Negative charges create a repulsive electrostatic environment. Along with the opposing EOF, this lowers the chances of capture. Additionally, we found that an increased number of graphene layers can shield internal electric fields, affecting ssDNA capture negatively by tempering the effects of EOF. This research highlights the importance of precise control over nanopore surface charge and layers to optimize the performance of graphene nanopore sequencing technologies, offering potential avenues for significant advancements in genomic sequencing.

Tuning oxygen vacancies in complex oxides using 2D layered materials

Abstract The hybrid interface between 2D materials and complex oxides offers a rich platform to explore fascinating physical phenomena like helical edge states, broken-symmetry phases, and giant magnetoresistance. While current research primarily focuses on the influence of complex oxides on layered 2D materials, the reverse - how layered 2D materials affect complex oxides - remains largely unexplored. Here, we examined the impact of graphene layers on the formation of oxygen vacancies in SrTiO3 (STO) during high-temperature annealing. Our findings, supported by Raman spectroscopy and X-ray photoelectron spectroscopy, indicate that increasing the number of graphene layers progressively leads to a reduced oxygen vacancy content in STO, demonstrating the efficacy of graphene in modulating oxygen vacancy formation in bulk STO. Additionally, using photoluminescence, we showed that graphene layers can tune the in-gap states induced by oxygen vacancies in STO. Our first principal calculations further revealed that graphene layers increase the energy barrier for the outward diffusion of oxygen atoms, thereby inhibiting the formation of oxygen vacancies in STO. These results highlight a new route for tailoring the physical properties of complex oxides by engineering the interface with layered 2D materials.

Microscopic deformation mechanism of inelasticity in graphene foams under quasi-static tension and compression

The unique porous structure and exceptional elasticity of graphene foams (GrFs) qualify them as prime candidates for various applications. However, the claim of their super-elasticity under compressive strains up to 90% is ambiguous, as the super-elastic behavior is accompanied by inelastic phenomena such as plasticity and microscale damage. This study systematically investigated the microscopic deformation mechanisms underlying the inelasticity of GrFs under both tension and compression using numerical experiments based on the coarse-grained molecular dynamics method. The “non-uniformity of deformation” parameter is proposed, and it revealed a two-stage deformation process characterized by nonlocalized and localized inelasticity. When the GrFs were subjected to tensile strains below a critical threshold, irreversible microstructural deformation resulted in nonlocalized inelasticity. Beyond this threshold, inelasticity was predominantly driven by localized plastic deformation and damage caused by bond breakages at the fracture interface. In contrast, only nonlocalized inelasticity occurred during the compression process. Furthermore, the results indicated that when nonlocalized inelasticity occurred, a negative correlation between the crosslink densities and the number of graphene layers existed. These results can deepen our understanding of the deformation properties of GrFs, which is crucial for their design and application.

Effect of the Number of Graphene Layers in rGO-CNT Current Collectors for Anode-Free Li Metal Batteries

Lithium (Li) ion batteries (LIBs) are the most widely used energy storage devices for the electronic devices and transportation sector due to their excellent electrochemical performances. However, since the conventional graphite anodes of the LIBs has saturated their theoretical capacity limits, it is needed to develop new battery systems to meet the increasing demands for the high-energy-density batteries. In this respect, Li metal batteries that employ the Li metal anode are considered as the most promising next-generation batteries owing to extremely high theoretical specific capacity (3860 mAh g–1) and the lowest redox potential (–3.040 V vs standard hydrogen electrodes) of the Li metal anode. Moreover, the pursuit of the higher energy density leads to the development of LMBs with anode-free configuration, so-called anode-free LMBs (AFLMBs). In these batteries, all the Li ions are extracted from the cathode materials and then form a Li metal on the anode current collector during the charge process. The absence of the Li metal anode during the cell manufacturing process leads to the simple fabrication process, low cost, and higher energy density even compared to the LMBs. However, the practical application of the AFLMBs is still hindered by several obstacles, such as poor coulombic efficiency (CE), severe volume change, and dendritic Li growth during cycling owing to their irreversible electrochemical reactions.In order to handle these problems, various approaches have been explored such as using novel electrolyte additives, modifying separators and introducing three–dimensional (3D) current collectors. Among the strategies, 3D current collectors have been proven to be effective in stabilizing the Li plating/stripping process and preventing the severe volume expansion during cycling due to the reduced local current density. In addition, the large specific surface area of the 3D current collectors leads to the accommodation of more excess Li than the conventional Cu current collector. However, the critical problem of the Li dendrites growth accompanied with continuous electrolyte decomposition still remains, which is inevitable in Li plating/stripping process. Thus, it is needed to develop a new type of current collector that has different Li storage mechanism.In this article, we designed two different rGOCNT current collectors to study how the intercalation behavior of the Li ions into the current collectors affects the electrochemical performances of the AFLMBs. With different number of graphene layers, each current collector showed a different extent of intercalation reaction, more in multi-layer rGOCNT current collector (MG-CC) and less in single-layer rGOCNT current collector (SG-CC). When the current collectors were evaluated in Li–metal cell tests, the MG-CC exhibited a significantly longer lifespan compared to the SG-CC. In addition, the MG-CC showed more stable cycling performances than the SG-CC in anode–free cell tests with a LiFePO4 (LFP) as a cathode. These results are attributed to the graphene-stacked structure of the MG-CC, which is more favorable for reversible intercalation/deintercalation process of Li ions, resulting in uniform Li plating and suppression of dendritic Li growth. As a result, this work demonstrates that introducing the intercalation behavior of Li ions into the current collector has a promising potential for achieving the stable cycling performances of AFLMBs.

Enhanced Optoelectronic Properties of Few-Layer Graphene for Transparent Conducting Electrode: Density Functional Theory Perspective

The challenge in utilizing graphene for transparent conducting electrodes (TCE) is to increase the electronic conductivity without significantly decreasing its transmittance. Forming a few-layer structure is an effective way to modify the electronic properties of graphene. In this paper, we used the density functional theory (DFT) method to study the effect of the number of few-layer graphene (FLG) layers on the electronic conductivity and transmittance. We find that increasing the number of layers leads to an increase in electronic conductivity. On the other hand, a decrease in transmittance was observed when the number of layers was increased. Based on the performance analysis, the optoelectronic properties of FLG with more than three layers were better than those of conventional TCE materials, such as indium tin oxide (ITO) and aluminium-doped zinc oxide (AZO). The calculated electronic conductivity and transmittance of a 4-layer FLG were 2.23×1019 (1/Ω.m.s) and 95.69%, respectively. This finding can be used as guidance for experimental research in developing graphene-based TCE materials. Keywords: density functional theory, electronic conductivity, few-layer graphene, transmittance

Enhanced Terahertz Characterization of Multilayer Graphene on Guided‐Mode Resonance Filter: Boosting Sensitivity and Precision in Electrical and Optical Characteristics

AbstractIn this study, terahertz time‐domain spectroscopy (THz‐TDS) is employed for the first time to explore the characteristics of mono‐, bi‐, and tri‐layer graphene coated on guided‐mode resonance filters (GMRFs). Owing to high quality‐factor (Q‐factor) resonances of GMRF, the proposed method significantly enhances the resonance depth variation by up to 9.3, 5.1, and 4.2 times at 0.58 THz in TE mode for mono‐, bi‐, and tri‐layer graphene, respectively, in contrast to conventional THz‐TDS methods relying on amplitude variation at 0.50 THz in TE mode. Excellent agreement is observed between experimental results and theoretical simulations using the Kubo formula and Drude model, even accounting for variations in sidelobes at an incident angle of 0.6 degrees. Through meticulous fitting process between measurements and simulations for the resonances formed by the GMRF and graphene, the study accurately determines the electrical and optical properties of mono‐, bi‐, and tri‐layer graphene, including frequency‐dependent sheet conductivity (σs(ω)), mobility (μ), carrier density (N), and Fermi velocity (vF). Furthermore, in the THz high‐frequency region, the observation reveals that as the number of graphene layers increases, the decrease in σs(ω) occurs more rapidly than in single‐layer graphene, attributed to the screening effect arising from electronic interactions between each graphene layer.

Observation of thickness-independent ultrafast relaxation times in MPCVD few-layer graphene

Graphene presents unique optoelectronic properties, making it attractive for the development of a wide range of new and advanced technological applications such as high-speed photodetectors and all-optical modulators. The study and control of the generated carriers in graphene, namely their ultrafast relaxation dynamics, are of great importance for these applications. Here, we report the ultrafast relaxation times of photogenerated carriers in few-layer graphene grown by microwave plasma chemical vapour deposition. Graphene samples with 3, 5 and 6 layers were studied by degenerate femtosecond optical pump-probe spectroscopy. We observed a fast relaxation constant on the order of 120−180fs and a slow relaxation constant below 1 ps, associated with carrier-carrier scattering and carrier-phonon scattering processes, respectively. These results suggest that small variations in the number of graphene layers do not affect the dynamics.

Unsupervised learning of spatially-resolved ARPES spectra for epitaxially grown graphene via non-negative matrix factorization

This study proposed an unsupervised machine-learning approach for analyzing spatially-resolved ARPES. A combination of non-negative matrix factorization (NMF) and k-means clustering was applied to spatially-resolved ARPES spectra of the graphene epitaxially grown on a SiC substrate. The Dirac cones of graphene were decomposed and reproduced fairly well using NMF. The base and activation matrices obtained from the NMF results reflected the detailed spectral features derived from the number of graphene layers and growth directions. The spatial distribution of graphene thickness on the substrate was clearly visualized by the clustering using the activation matrices acquired via NMF. Integration with k-means clustering enables clear visualization of spatial variations. Our method efficiently handles large datasets, extracting spectral features without manual inspection. It offers broad applicability beyond graphene studies to analyze ARPES spectra in various materials.

Observation of novel carbon nanocorals during the synthesis of graphene and investigations on their composition, morphological and structural properties

Novel carbon nanocorals (CNCs) are observed during the synthesis of graphene on copper substrates by thermal chemical vapor deposition, using precursor gas acetylene (C2H2) and carrier gas argon (Ar). CNCs have unique structure and investigations are carried out on structural and elemental compositions by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray excited Auger electron spectroscopy (XAES), energy dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), and high resolution transmission electron microscopy (HRTEM). The graphitic nature of the CNCs is evident from characteristic D, G, and 2D bands obtained from Raman spectrum. Elemental composition analysis by XPS shows presence of sp2 and sp3 hybridized carbon whereas XAES quantifies percentage of sp2 and sp3 hybridized carbon. FESEM micrographs show a uniform distribution of densely packed CNCs throughout the sample, and formation of groups of CNCs with distinct contours on the surface. The cross-sectional FESEM shows stacking of large number of graphene layers with dendrites. HRTEM analysis further supports observations of FESEM and elaborates structural morphology of the CNCs. Synthesis, characterization and analysis of the properties of carbon nanocorals are reported here, for the first time.

Liquid-phase shear exfoliation of graphite and its application as corrosion protection coating on aluminum substrate

Although aluminum (Al) or its alloys are moderately protected by a native oxide layer, the presence of chloride ions in aqueous media in direct contact causes pitting attacks and accelerates corrosion. Using graphene as a coating protector can obstruct corrosion due to its numerous chemical and physical properties. This study investigates corrosion protection of Al using graphene nanosheets (GNSs) produced by liquid phase shear exfoliation method (LPE). To do so, few layer-thick graphene nanosheet colloidal solutions were produced by a scalable eco-friendlier lower cost approach. The GNSs were thoroughly characterized using complementary characterization techniques to determine its quality. Spectroscopic and microscopic analyses indicate the synthesis of few-layers graphene (≤ 5 layers) with a high quality. Once approved, the colloidal solution of GNSs was spread over Al substrate by spray coating method, widely used in industrial manufacturing. Raman and near infrared spectroscopies, X-ray diffraction, microscopy techniques including scanning electron, transmission electron and atomic force microscopies were used to investigate morphological and structural behavior of coated GNSs films either on glass or Al substrates. Density functional theory (DFT) calculations revealed the interaction between the two materials is of the physisorption type, with almost no charge transfer and almost no effect of the number of graphene layers. Electrochemical measurements enabled to investigate the corrosion resistance of GNSs films and its stability over time in a 0.5 M sodium chloride (NaCl) solution, similar to marine surroundings. It was found that introducing a GNSs film can indeed reduce the corrosion rate and preserve Al substrate for an extended period.

Electrical conductivity of graphene/copper composites at lattice scale

Graphene/copper composites are potential structure-function integrated materials. Different from previous micro-nano scale composites, graphene/copper lattice-scale composites and their effects on electrical conductivity are investigated in this work. Using the first-principles calculation to explore the effects of different numbers of graphene layers on the properties of graphene/copper composites, it is found that with the increase of graphene layer numbers, the interfacial bonding strength improves, but the electrical properties show a decreasing trend due to the electron scattering and increasing Cu–C layer distance. The single-layer graphene/copper composite has the most excellent electrical properties, with the highest density of states at the Fermi level and the most charge transfer. A series of layered-structural composites at lattice scale are screened, and their electrical properties and dynamic stability are also predicted. These composites rely on metallic bonding to connect copper and carbon atoms, most of which show obvious vertical charge transfer and high conductivity, with short Cu–C layer distance and alternating arrangement of metal layers and hexagonal carbon atoms. CuC2 (derived from MgB2) has the highest average conductivity and dynamic stability and can be considered an ideal lattice-scale composite. The development of new lattice-scale composites is significant for the future research of graphene/copper composites.

Interfacial heat transport properties of graphene/natural rubber composites studied based on molecular dynamics approach

The interface between graphene and natural rubber significantly impacts the thermal properties of graphene/natural rubber composites. This paper uses molecular dynamics to investigate interfacial heat transport. The study found that the thermal conductivity of the composites increases non-linearly with graphene content: a 136 % increase at 10.5 % graphene and only 12.23 % at 16.4 % graphene. As graphene content increases, graphene agglomerates within the natural rubber due to weak van der Waals forces. The interfacial thermal resistance of the composites increases with temperature, rising by 69.94 % from 200K to 450K. When pressure increases from 0.1 MPa to 2.5 MPa, the maximum change in interfacial thermal resistance is 24.39 %. The study also found that interfacial thermal resistance increases with the number of graphene layers. Thus, the interfacial thermal resistance between graphene and natural rubber is the main reason for the minor change in the thermal conductivity of the composites, with temperature having a greater impact.

Beyond lithium-ion batteries: Are effective electrodes possible for alkaline and other alkali elements? Exploring ion intercalation in surface-modified few-layer graphene and examining layer quantity and stages

In the pursuit of reliable energy storage solutions, the significance of engineering electrodes cannot be overstated. Previous research has explored the use of surface modifiers (SMs), such as single-side fluorinated graphene, to enhance the thermodynamic stability of ion intercalation when applied atop few-layer graphene (FLG). As we seek alternatives to lithium-ion batteries (LIBs), earth-abundant elements like sodium and potassium have emerged as promising candidates. However, a comprehensive investigation into staging intercalation has been lacking thus far. By delving into staging assemblies, we have uncovered a previously unknown intercalation site that offers the most energetically favorable binding. Here, we study the first three elements in both alkali (Li, Na, K) and alkaline (Be, Mg, Ca) earth metals. Furthermore, the precise mechanism underlying this intercalation system has remained elusive in prior studies. In our work, we employed density functional theory calculations with advanced hybrid functionals to determine the electrical properties at various stages of intercalation. This approach has been proven to yield more accurate and reliable electrical information. Through the analysis of projecting density of states and Mulliken population, we have gained valuable insights into the intricate interactions among the SM, ions, and FLG as the ions progressively insert into the structures. Notably, we expanded our investigation beyond lithium and explored the effectiveness of the SM on ions with varying radii and valence, encompassing six alkali and alkaline earth metals. Additionally, we discovered that the number of graphene layers significantly influences the binding energy. Our findings present groundbreaking concepts for material design, offering diverse and economically viable alternatives to LIBs. Furthermore, they serve as a valuable reference for fine-tuning electrical properties through staging intercalation and the application of SMs.

Few-layered-graphene - Si3N4 composite powders prepared by decomposition of methane onto a Si3N4 powder bed: Control of the average number of layers in the graphene stack

The chemical vapor deposition of carbon is performed onto a commercial silicon nitride powder bed. This produces few-layered-graphene (FLG) films or islands on the Si3N4 particles. The samples are characterized by several techniques including Raman spectroscopy, scanning and transmission electron microscopy. The experimental parameters of the methane (CH4) decomposition (temperature, CH4 concentration, dwell time) are correlated to the average number of graphene layers (N). Complete coverage of the Si3N4 particles is achieved for FLG with N controlled in the range 5–12, corresponding to 4–12 wt%. of carbon. Below that, for stacks with N = 3–4, the coverage of the surface by FLG islands is not total. The value found for the activation energy of CH4 conversion into carbon shows that island-growth is favored over layer-growth. A macroscopical method based on a carbon proportion evaluation gives an approximation of both the coverage ratio and the average number of layers in the stack.

The Tunable Parameters of Graphene-Based Biosensors.

Graphene-based surface plasmon resonance (SPR) biosensors have emerged as a promising technology for the highly sensitive and accurate detection of biomolecules. This study presents a comprehensive theoretical analysis of graphene-based SPR biosensors, focusing on configurations with single and bimetallic metallic layers. In this study, we investigated the impact of various metallic substrates, including gold and silver, and the number of graphene layers on key performance metrics: sensitivity of detection, detection accuracy, and quality factor. Our findings reveal that configurations with graphene first supported on gold exhibit superior performance, with sensitivity of detection enhancements up to 30% for ten graphene layers. In contrast, silver-supported configurations, while demonstrating high sensitivity, face challenges in maintaining detection accuracy. Additionally, reducing the thickness of metallic layers by 30% optimizes light coupling and enhances sensor performance. These insights highlight the significant potential of graphene-based SPR biosensors in achieving high sensitivity of detection and reliability, paving the way for their application in diverse biosensing technologies. Our findings pretend to motivate future research focusing on optimizing metallic layer thickness, improving the stability of silver-supported configurations, and experimentally validating the theoretical findings to further advance the development of high-performance SPR biosensors.

Effects of quenching rate on the plasma gas-phase synthesis of graphene: Insight from the experiments and ReaxFF studies

This investigation analysed the effects of quenching rate on the plasma gas-phase synthesis of graphene. The quenching rate was modulated by the flowrate/type of radial gas whish was injected in the plasma downstream. The experimental results showed that the plasma pyrolysis of acetylene produced spherical carbon nanoparticles. The content graphene flakes in the products increased with the quenching effect, and the layer number of graphene decreased accordingly. Further characterisation confirmed that a high quenching rate increased the crystallinity of the product, reduced the amorphous carbon content, and resulted in better oxidation resistance. The graphene formation pathway was carried out by the molecular dynamics simulations (ReaxFF), focusing on the effect of the quenching rate on graphene growth. As the quenching rate increased, the decrease in the time for surface reactions lowered the generation of five- and seven-membered rings, reducing the possibility of edge growth bending. Besides, an increased quenching rate rapidly lowered the growth temperature and thus retarded the C–H bond breakage at the edges of the carbon clusters. The C–H bonds terminated C–C bond formation at the edges of the carbon clusters, preventing edge growth bending of the carbon clusters, and thus contributing to the growth of lamellar structure. These results suggested that increasing the quenching rate is an effective method for regulating the plasma gas-phase synthesis of graphene.

Influence of heat transfer at the graphene–polyimide interface on laser-induced graphene formation

Laser-induced graphene (LIG) provides a three-dimensional porous structure of graphene, which is suitable for application to energy storage devices and flexible electronics. Controlling the morphology and structure of LIG and understanding its underlying principle are important for enhancing the performance of LIG-based devices. Here, we investigated the effects of graphene interfacing with a precursor material on the LIG formation. A CO2 laser with different powers and scan rates was irradiated on a polyimide film covered with mono-, bi-, and trilayer graphene to fabricate in situ LIG contacts. As the number of graphene layers increases, the threshold energy required for the LIG formation decreases. In addition, the interfacing graphene causes spreading and smoothing of the LIG electrodes in the in-plane direction. A numerical study on the effect of the interfacing graphene on heat transfer was also conducted. The simulation results showed that the graphene layer enhances thermal diffusion to facilitate the LIG formation; this was also observed in the experimental results. Our study on the interfacial effects of a nanomaterial on the LIG formation provides design guidelines for considering heat transfer in LIG electronics fabricated with heterogeneous materials and structures.

Investigation of thermal conductivity and mechanical properties in multi-layer of graphene and graphene oxide: a molecular dynamics study

ABSTRACT Multi-layered graphene and graphene oxide have been used as reinforcements in nanodevices and nanocomposites due to their extraordinary mechanical and thermal properties. However, compared to graphene, graphene oxide has a lower Young’s modulus and lower thermal conductivity. Nanodevices and nanocomposites based on multi-layered graphene and graphene oxide require different mechanical properties and thermal conductivity. This study employed molecular dynamics simulation to investigate 10 models of multi-layered graphene and graphene oxide (in the form of different layer arrangements) in single, double, and triple layers. The results showed that an increase in the number of graphene oxide layers leads to irregularities in the nanosheets, resulting in decreased thermal conductivity (by 64.4%) of the nanosheets decreases. Furthermore, the greater number of graphene layers in multi-layer nanosheets resulted in an increase in Young’s modulus (by 79.3%) and tensile strength (by 73.7%). Moreover, the arrangement of graphene and graphene oxide is a crucial factor that can significantly impact the mechanical properties and thermal conductivity of the models. Moreover, an increase in temperature can lead to a decrease in Young’s modulus of multilayered nanosheets. Increasing the number and size of graphene layers enhances both the ultimate tensile strength and the critical energy release rate.

Optical image analysis for graphene layer detection: Enhanced green channel methodology

Graphene, a material of increasing research interest, requires accurate layer identification due to its sensitivity to layer count. Existing methods for graphene layer number identification are either time-consuming or of low accuracy, with high-accuracy methods often requiring expensive processes. This paper aims to address this challenge by proposing a cost-effective and efficient approach. Specifically, the current work highlights only the green channel—one of the three primary color channels (red, green, blue) that make up an optical image—from images of exfoliated graphene flakes for layer count identification. A linear regression is performed between pixel position and substrate green channel value, and this effect is subtracted from the entire optical image to mitigate background effects. By storing the range of green channel values for each type of flake (monolayer, bilayer, or tri-layer) based on a few images, we establish thresholds for identifying different types of layers in a particular setup. Additionally, our methodology allows for flexible threshold tuning using a single reference image, enabling adjustment to changes in detection setup such as illumination level, magnification, or microscope used. Demonstrating high accuracy and flexibility, this methodology presents a suitable technique for graphene layer number identification without the need for large datasets or expensive instruments.

Coal-based graphene formation by CO2 laser scribing: Various structures and excellent electrochemical performance

The laser-induced technique is a cost-effective and environmentally-friendly method for upgrading coal into high value-added graphene materials. Here, laser-induced graphenes (LIGs) were prepared from different rank coals in one-step under vacuum conditions using a designed CO2 infrared laser device. The characteristics of laser-induced products were studied by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. The electrochemical characteristics of coal-based laser-induced graphenes (C-LIGs) were examined in a three-electrode test system. Results show that subbituminous coal, bituminous coal, and low-metamorphic anthracite can form LIG with fewer layers after laser irradiation. The morphology of C-LIG is a layered porous structure. Corrugated folds can be observed at the edges of the C-LIG layer. There are only a few layers of graphene, with the majority of them concentrated in 2–10 layers. The most interesting result is that LIG prepared from low volatile bituminous coal has the highest crystallinity, the largest aromatic layer size, and the lowest average graphene layer number. Furthermore, LIG made from low volatile bituminous coal (LIG-ZJ) exhibits excellent electrical double-layer capacitive behavior, low equivalent series resistance (3.73 Ω), good rate capability, excellent cycling stability, greater Coulombic efficiency, and high mass specific capacitance. The LIG-ZJ electrode exhibits a high specific capacitance of 1879.92 F/g at 1 A/g, which is nearly ten times greater than that of most activated carbon electrodes reported. In addition, its power density and energy density can reach up to 924.07 kW/kg and 217.11 Wh/kg. These results indicate that coal-based laser-induced graphene has significant potential for application in the field of electrochemical energy storage.