Layer In Solar Cells Research Articles

Constructing Multiscale Fibrous Morphology to Achieve 20% Efficiency Organic Solar Cells by Mixing High and Low Molecular Weight D18.

This study underscores the significance of precisely manipulating the morphology of the active layer in organic solar cells (OSCs). By blending polymer donors of D18 with varying molecular weights, a multiscale interpenetrating fiber network structure within the active layer is successfully created. The introduction of 10% low molecular weight D18 (LW-D18) into high molecular weight D18 (HW-D18) produces MIX-D18, which exhibits an extended exciton diffusion distance and orderly molecular stacking. Devices utilizing MIX-D18 demonstrate superior electron and hole transport, improves exciton dissociation, enhances charge collection efficiency, and reduces trap-assisted recombination compared to the other two materials. Through the use of the nonfullerene acceptor L8-BO, a remarkable power conversion efficiency (PCE) of 20.0% is achieved. This methodology, which integrates the favorable attributes of high and low molecular weight polymers, opens a new avenue for enhancing the performance of OSCs.

Oxide Derivatives of Nb2CTx MXene and Their Application as Electron Transport Layers in Perovskite Solar Cells: Unraveling the Oxidation Process and Functionalization.

In the realm of photovoltaic research, 2D transition metal carbides (MXenes) have gained significant interest due to their exceptional photoelectric capabilities. However, the instability of MXenes due to oxidation has a direct impact on their practical applications. In this work, the oxidation process of Nb2CTx MXene in aqueous systems is methodically simulated at the atomic level and nanosecond timescales, which elucidates the structural variations influenced by the synergistic effects of water and dissolved oxygen, predicting a transition from metal to semiconductor with 44% C atoms replaced by O atoms in Nb2CTx. Moreover, Nb2CTx with varying oxidation degrees is utilized as electron transport layers (ETLs) in perovskite solar cells (PSCs). Favorable energy level alignments with superior electron transfer capability are achieved by controlled oxidation. By further exploring the composites of Nb2CTx to its derivatives, the strong interaction of the nano-composites is demonstrated to be more effective for electron transport, thus the corresponding PSC achieves a better performance with long-term stability compared with the widely used ETLs like SnO2. This work unravels the oxidation dynamics of Nb2CTx and provides a promising approach to designing ETL by exploiting MXenes to their derivatives for photovoltaic technologies.

Preparation of the scattering layer based on SnO2 nanocrystals for dye sensitized solar cell application

Abstract In this work, SnO2 paste was prepared based on (0.1 and 0.12 g) of SnO2 nanoparticles. The SnO2 film was deposited using Screen printing and doctor blade techniques, which it employed as scattering layer in Dye-Sensitized Solar Cell (DSSC). The crystal structure, morphology, and thermal stability of the paste were investigated using XRD, FE-SEM, and TGA techniques. The DSSC parameters were achieved to examining the effect of scattering layer on performance of DSSC. The results showed a crystalline structure predominantly composed of rutile SnO2 crystals arranged in a tetragonal pattern, with individual crystallites measuring approximately 100 nanometers in size. SEM images depicted the surface of SnO2 resembling a sponge with fine pores facilitating dye adsorption and electron mobility. Moreover, a decrease in average particle size was observed with increasing dye concentration, with the average grain size of SnO2 particles being below 100 nanometers at lower dye concentrations. TGA measurements indicated a phase transition occurring around 400 °C.

The use of 1D carbon nanotube interacting with caffeine molecules for applications in solar cells: structure optimisation, Raman analysis and optoelectronic properties

This study proposes a promising candidate for organic solar cells through the creation of a novel nano-hybrid system composed of caffeine molecules encapsulated within a semiconducting single-walled carbon nanotube known as NT14 (14,0). The stability and optoelectronic properties of this hybrid system, designated as CA@NT14, were thoroughly investigated. We determined the optimal diameter for the NT14 nanotube using molecular mechanics, Density Functional Theory, spectral moment’s method, and bond polarizability model, finding it to be approximately 1.18 nm. The encapsulation’s impact on the Raman-active modes, specifically the radial breathing mode and tangential mode, was analyzed through Raman spectra calculations, revealing structural stability and charge transfer from CA to NT14. Notably, the NT14’s Fermi level position increased upon encapsulation, indicating charge transfer and a type-II band alignment. The study further examined the bandgap characteristics of the hybrid system, finding that the encapsulation of CA within semiconducting NT14 nanotubes minimally impacts the nanotube’s bandgap, thus retaining its excellent visible light absorption properties. Conversely, encapsulating CA within metallic nanotubes significantly reduces their bandgap, limiting their light absorption range. The nonresonant Raman responses of NT14 pre- and post-encapsulation corroborated the charge transfer between CA and NT14. Future research will focus on computing the electronic transport characteristics, transmission spectra, I-V characteristics, and yield of CA@NT14 using DFT and Non-Equilibrium Green’s Function ( formalism. An experimental study will be conducted to validate these theoretical findings. These results indicate the potential of CA@NT14 hybrids as effective active layers in organic solar cells, highlighting their significance in advancing optoelectronic applications.

A Broadband Light‐Trapping Nanostructure for InGaP/GaAs Dual‐Junction Solar Cells Using Nanosphere Lithography‐Assisted Chemical Etching

III–V‐based multijunction solar cells have become the leading power generation technology for space applications due to their high power conversion efficiency and reliable performance in extraterrestrial environments. Thinning down the absorber layers of multijunction solar cells can considerably reduce the production cost and improve their radiation hardness. Recent advances in ultrathin GaAs single‐junction solar cells suggest the development of light‐trapping nanostructures to increase light absorption in optically thin layers within III–V‐based multijunction solar cells. Herein, a novel and highly scalable nanosphere lithography‐assisted chemical etching method to fabricate light‐trapping nanostructures in InGaP/GaAs dual‐junction solar cells is studied. Numerical models show that integrating the nanostructured Al2O3/Ag rear mirror significantly enhances the broadband absorption within the GaAs bottom cell. Results demonstrate that the light‐trapping nanostructures effectively increase the short‐circuit current density in GaAs bottom cells from 14.04 to 15.06 mA cm−2. The simulated nanostructured InGaP/GaAs dual‐junction structure shows improved current matching between the GaAs bottom cell and the InGaP top cell, resulting in 1.12x higher power conversion efficiency. These findings highlight the potential of light‐trapping nanostructures to improve the performance of III‐V‐based multijunction photovoltaic systems, particularly for high‐efficiency applications in space.

Enhanced charge separation at the interface of Cu2O/CuSCN composite thin films synthesized by electrodeposition technique

This study focuses on the synthesis and characterization of hole transport layers (HTLs) for solar cells, par- ticularly copper(I) thiocyanate (CuSCN) and cuprous oxide (Cu2O), synthesized via electrodeposition tech- niques. CuSCN and Cu2O offer promising properties for efficient charge transport in photovoltaic devices. The synthesis processes involve precise control of deposition parameters to achieve desired film morpholo- gies and properties. Characterization techniques including scanning electron microscopy (SEM), atomic force microscopy (AFM), and ultraviolet-visible (UV-Vis) spectroscopy provide insights into film morphology and optical properties. Optimization of synthesis parameters for Cu2O films is explored to enhance their electrical properties. Photoelectric response measurements indicate improved charge separation at the interface of Cu2O/CuSCN composite films. These findings can contribute to the advancement of solar cell technology. Furthermore, the study extends its exploration to the fabrication of Cu2O by electrodeposition at different pH levels. SEM and X-ray diffraction (XRD) analyses reveal the impact of deposition parameters on film mor- phology and crystal structure, providing valuable insights for tailored synthesis approaches. Overall, this comprehensive study not only advances the understanding of HTL materials synthesis and optimization but also provides valuable guidance for the development of high-efficiency and stable solar cell devices.

Molecular Design of Active Layer for High-Performance Stretchable Organic Solar Cells.

Stretchable organic solar cells (SOSCs) have advanced rapidly in the last few years as power sources required to realize portable and wearable electronics become available. Through rational material and device engineering, SOSCs are now able to retain their photovoltaic performance even when subjected to repeated mechanical deformations. However, reconciling a high efficiency and an excellent stretchability is still a huge challenge, and the development of SOSCs has lagged far behind that of flexible OSCs. In this perspective article, recent strategies for imparting mechanical robustness to SOSCs while maintaining high power conversion efficiency are reviewed, with emphasis on the molecular design of active layers. Initially, an overview of molecular design approaches and recent research advances is provided in improving the stretchability of active layers, including donors, acceptors, and single-component materials. Subsequently, another common strategy for regulating photovoltaic and mechanical properties of SOSCs, namely multi-component system, is summarized and analyzed. Lastly, considering that SOSCs research is in its infancy, the current challenges and future directions are pointed out.

Hybrid Aromatic Fluoro Amine‐Modified SnO2 Electron Transport Layers in Perovskite Solar Cells for Enhanced Efficiency and Stability

SnO2 is a widely used electron‐transporting layer (ETL) in perovskite solar cells. Despite the high compatibility with the perovskite absorber layers, the presence of traps at the perovskite|SnO2 interface results in performance losses; hence, their modification to improve the performance and stability of perovskite solar cells (PSCs) is therefore important. Herein, the SnO2 ETL is enhanced by incorporating a bifunctional aromatic amino fluorine molecule into the SnO2 precursor solution. The fluorine molecule is found to partially substitute the Sn and alter the energy levels while the aniline group aids in regulating the nucleation/growth rate of the perovskite crystalline films. Herein, a hole transporting material‐free carbon‐based PSCs (CPSCs) is fabricated. It is found that perovskite absorber layers deposited on these modified SnO2 hybrid layers have higher optoelectronic quality, resulting in enhanced photovoltaic performance, device stability, and reduced hysteresis in CPSCs. Devices made with the modified hybrid SnO2 layers exhibit power conversion efficiencies of 15.6% significantly better than unmodified SnO2 with 13.5%. CPSCs with these modified SnO2 films also exhibit remarkable retention of 88.7% of their initial PCE for a shelf‐life period (ISOS‐D1I) exceeding 1200 h.

The importance of enhancing D-Dand A-Astacking simultaneously for the balance of hole and electron mobility of small molecule single-component organic solar cells.

Single-component organic solar cells (SCOSCs) have attracted extensive attention due to their simplified device manufacturing and excellent stability. However, the relationship between morphology and charge carrier mobility in the active layers of SCOSCs is not well understood. In this work, we present a comprehensive investigation on this issue by studying four dyads (fullerenes as acceptor units) used as materials of active layers in small-molecule single-component organic solar cells (SM-SCOSCs), in which dyad 4 created the record of power conversion efficiency (PCE) of SM-SCOSC until now. Utilizing a multiscale theoretical approach, the results identify that the acceptor-acceptor stacking is dominant in amorphous films, significantly improving electron mobility and lowering hole mobility. We also find the importance of achieving a balance between electron and hole mobility to further improve PCE of SM-SCOSC because dyad 4 exhibits a more balanced electron/hole mobility than the other three molecules. These findings indicate the importance of tuning and enhancing donor-donor and acceptor-acceptor stacking simultaneously, offering insights for the design and optimization of future SM-SCOSC.

Reduced graphene oxide as the electron transport layer in perovskite solar cell: effect on the photovoltaic performance

Reduced graphene oxide as the electron transport layer in perovskite solar cell: effect on the photovoltaic performance

Fine Tuning the Work Function of ZnO Cathode Buffer Layers in Organic Solar Cells by Phenanthroline Coordination

Fine Tuning the Work Function of ZnO Cathode Buffer Layers in Organic Solar Cells by Phenanthroline Coordination

Investigation of thermally induced surface composition and morphology variation of magnetron sputtered Sb2Se3 absorber layer for thin film solar cells

One of the most promising semiconductor materials for the development of sustainable thin-film solar cell technology is antimony selenide (Sb2Se3). Its excellent optical and electrical properties have drawn attention lately for potential application in thin-film solar cells. In this study, Sb2Se3 films deposited using the direct current (DC) magnetron sputtering technique have been subjected to a post-annealing process without an extra selenium supply at temperatures between 150 and 450 °C. Without an extra selenium supply, the impact of post-annealing temperature on the surface composition as well as the physical properties of the fabricated films was investigated. The overall evaluations revealed that the post-annealing temperature is highly efficient in altering the physical properties of the Sb2Se3 absorber thin films. We further observed that the post-annealing process improved the crystallization and the heat treatment temperature quite affected preferential orientation. The surface morphology of films exhibited structural deformation at high post-annealing temperatures (> 350 °C). According to optical and electrical characterizations, respectively, the optical energy gap and the resistivity of Sb2Se3 films reduced with an increment in the post-annealing temperature. Based on the XPS result, the variation in temperature of post-annealing led to a change in the surface composition of the films. The findings on the growth of Sb2Se3 thin films indicate the existence of an intermediate growth temperature that permits the growth of Sb2Se3 films to be optimized. The study’s conclusions can serve as a guide to the growth of Sb2Se3 thin films with the desired crystallinity, surface morphology, and composition for thin film solar cell applications.

Innovations in Interconnecting Layers for Perovskite-Based Tandem Solar Cells

Innovations in Interconnecting Layers for Perovskite-Based Tandem Solar Cells

Theoretical Investigation on Carbazole Derivatives as Charge Carriers for Perovskite Solar Cell

The study explores carbazole‐based organic molecules as transport layers in durable perovskite solar cells, focusing on their optoelectronic and charge transfer properties. Thirteen carbazole derivatives are systematically analyzed via density functional theory (DFT) calculations to understand their structure and optoelectronic characteristics. Substituents like bromo, phenyl, thiophenyl, and pyridyl at positions 3,6‐ and 2,7‐ of carbazole were studied. Phenyl and thiophenyl substitutions lowered highest occupied molecular orbital (HOMO) energy levels, while bromo and pyridyl increased them, tuning HOMO energies from −5.45 to −6.03 eV. These energies align well with perovskite materials valence bands, with absorbance primarily below 400 nm, complementing perovskite absorption. The compounds showed high light‐harvesting efficiencies (LHEs) (0.22 to 0.94) and improved radiative lifetimes. Theoretical investigations identified most compounds as effective p‐type hole‐transport materials (HTM), except 3,6‐ and 2,7‐dithiophenyl carbazoles, which exhibited n‐type behavior due to low hole reorganization energies. Overall, the study highlights computational design's role in developing carbazole derivatives as promising charge carrier precursors for perovskite solar cells.

Enhancing the Performance of Nanocrystalline SnO2 for Solar Cells through Photonic Curing Using Impedance Spectroscopy Analysis.

Wide-bandgap tin oxide (SnO2) thin-films are frequently used as an electron-transporting layers in perovskite solar cells due to their superior thermal and environmental stabilities. However, its crystallization by conventional thermal methods typically requires high temperatures and long periods of time. These post-processing conditions severely limit the choice of substrates and reduce the large-scale manufacturing capabilities. This work describes the intense-pulsed-light-induced crystallization of SnO2 thin-films using only 500 μs of exposure time. The thin-films' properties are investigated using both impedance spectroscopy and photoconductivity characteristic measurements. A Nyquist plot analysis establishes that the process parameters have a significant impact on the electronic and ionic behaviors of the SnO2 films. Most importantly, we demonstrate that light-induced crystallization yields improved topography and excellent electrical properties through enhanced charge transfer, improved interfacial morphology, and better ohmic contact compared to thermally annealed (TA) SnO2 films.

Enhancement of Electron Transport Characteristics Using MXene-MnFeO3 Nanocomposite Integration with Fullerene Derivatives for the Perovskite-Based Solar Cells and Detectors.

In this study, we prepared a hybrid film incorporating the MnFeO3-decorated conducting two-dimensional (2D) MXene sheet-suspended [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) electron transfer layer (ETL) for the perovskite solar cells (PSCs) and detectors. The incorporation of MXene-MnFeO3 with the PCBM ETL could drive exceptional conducting features for the PSCs. Moreover, the presence of MXene-MnFeO3 facilitated superior charge transfer pathways, thereby enhancing the electron extraction and collection processes. This enhancement was directed to improve the electron mobility within the device, resulting in high photocurrents. The designed interface engineering with the MXene-MnFeO3 nanocomposite-tuned PCBM ETL has produced a remarkable power conversion efficiency of 17.79% ± 0.27. Moreover, X-ray detectors employing PCBM modulated with the MXene-MnFeO3 ETL achieved notable performance metrics including 18.47 μA/cm2 CCD-DCD, 5.53 mA/Gy·cm2 sensitivity, 7.64 × 10-4 cm2/V·s electron mobility, and 1.51 × 1015 cm2/V·s trap density.

Buried interface modification of condensation reflux-processed SnO2 electron transport layers for CsPbBr3 perovskite solar cells

Low temperature solution-processed SnO2 is favorable for electron transport layer (ETL) of flexible perovskite solar cells (PSCs) owing to their process compatibility. Here, we propose a route of condensation reflux-processed SnO2 ETLs for PSCs using SnCl2 source. However, the low temperature SnCl2-derived SnO2 ETLs are inherently associated with a high defect state density as well as a large amount of H+ and Cl- residual on the surface, which will cause open-circuit voltage (VOC) loss of the devices. To tackle this issue, aqueous solutions of KOH, CsOH, and KCl have been employed to regulate the buried interfaces. The effects of different cations (K+ and Cs+) and anions (OH- and Cl-) on the photovoltaic performance of the devices have been comparatively explored. The buried interface with KOH modification showed the best effect, which not only improved the quality and light absorption of CsPbBr3 perovskite layer but also markedly reduced the defect state density at the interface. The optimal device with an architecture of FTO/SnO2/KOH/CsPbBr3/carbon exhibited a champion power conversion efficiency (PCE) of 7.80 %, VOC of 1.46 V, short-circuit current density (JSC) of 7.50 mA/cm2, and fill factor (FF) of 0.71, compared with the pristine counterpart with a PCE of 5.86 %, VOC of 1.40 V, JSC of 6.37 mA/cm2, and FF of 0.66, respectively. The strategy of low temperature-processed SnO2 ETLs by KOH interface modification may also provide an avenue for other-typed flexible PSCs manufacture.

High efficiency carbon-based CsPbI2Br solar cells achieved by bidirectional passivation of cadmium p-aminobenzoate

The tin dioxide (SnO2) layer is commonly used as a traditional electron transport layer (ETL) in perovskite solar cells. However, it exists numerous defects in interior and on surface, diminishing the electron transport rate and causing energy level mismatches, thereby limiting the photoelectric conversion efficiency (PCE). In this study, cadmium p-aminobenzoate (PABACd) is synthesized using the displacement reaction and applied to modify the interface between the SnO2 ETL and CsPbI2Br film to achieve bidirectional passivation. Cd2+ effectively passivates defects in the ETL and penetrates perovskite crystals, contributing to defect passivation. Furthermore, PABA− stabilizes the [PbX6]4− octahedron, enhancing the stability of CsPbI2Br perovskite solar cells (PSCs). As a result of these interactions, the PABACd-optimized device achieved a maximum PCE of 14.34 % and an outstanding open-circuit voltage of 1.27 V. Simultaneously, the PCE of the optimized CsPbI2Br PSCs remains at 92 % of the initial efficiency after 30 days of aging in an air environment with 15–20 % humidity.

Tin oxides@stannous pyrophosphate colloidal quantum dots as multifunctional electron transporting layer for efficient and stable perovskite solar cells

Perovskite solar cells (PSCs) are anticipated to spearhead the revolution in solar energy technology. Engineering the electron transporting layer (ETL)/perovskite heterointerface is known to be a key point for further high-performance PSCs because it determines the main charge transporting and energy losses. However, the most advanced SnO2 colloidal precursors tend to exhibit agglomeration and structural flaws, thereby deteriorating the morphology and electronic mass of the obtained ETL. Here, we polished the microstructure of the SnO2 surface by self-assembling SnO2@Sn2P2O7 quantum dots (SPOS), which is synthesized by the chemical reaction between hypophosphoric acid (H3PO2) and SnO2. The Sn2P2O7 was synthesized on the SnO2 surface, terminating the surface dangling bonds and resulting in steady SPOS quantum dots with smooth microstructure. The SPOS ETL with good optical and electrical properties as well as matched bandgap alignment with perovskite, yielding an improved power conversion efficiency of 23.35% for PSCs. Moreover, due to the suppression of defect-induced deprotonation reactions, the SPOS-PSCs exhibit favorablelongstability than the SnO2-PSCs. This work demonstrates that the surface reconstruction of the ETL is crucial for enhancing the power conversion efficiency and stability of PSCs.

Application of isoindigo-based small molecule conjugated electrolytes at interfaces with organic solar cells

Zwitterionic small molecule materials are widely employed in the cathode interface layer of organic solar cells (OSCs). Nevertheless, the exploration of superior cathode interface materials with the objective of enhancing the performance of OSCs remains a significant challenge. Two water/alcohol soluble n-type self-doped small molecule conjugated electrolytes were synthesized using isoindigo as the acceptor unit and triphenylamine (TPA) as the donor unit. Quaternary ammonium salts or pyridine salts were used as the polar side chains. When applied to organic solar cells (OSCs) with PTB7-Th: PC71BM as the active layer, the devices showed improved performance. The power conversion efficiency (PCE) reached 8.59 % (IIDN2TPA) and 8.81 % (IIDPy2TPA), respectively. These results demonstrate the water/alcohol-soluble D-A-D-type small-molecule conjugated electrolytes offer an effective strategy in designing cathode interlayer (CIL) and preparing the high-performance OSCs.