Laxity Testing Research Articles

A Flat Reconstruction of the Medial Collateral Ligament and Anteromedial Structures Restores Native Knee Kinematics: A Biomechanical Robotic Investigation

Background: Injuries of the superficial medial collateral ligament (sMCL) and anteromedial structures of the knee result in excess valgus rotation and external tibial rotation (ER) as well as tibial translation. Purpose: To evaluate a flat reconstruction of the sMCL and anteromedial structures in restoring knee kinematics in the combined MCL- and anteromedial-deficient knee. Study Design: Controlled laboratory study. Methods: Eight cadaveric knee specimens were tested in a 6 degrees of freedom robotic test setup. Force-controlled clinical laxity tests were performed with 200 N of axial compression in 0°, 30°, 60°, and 90° of flexion: 8 N·m valgus torque, 5 N·m ER torque, 89 N anterior tibial translation (ATT) force, and an anteromedial drawer test consisting of 89 N ATT force under 5 N·m ER torque. After determining the native knee kinematics, we transected the sMCL, followed by the deep medial collateral ligament (dMCL). Subsequently, a flat reconstruction of the sMCL with anteromedial limb, mimicking the function of the anteromedial corner, was performed. Mixed linear models were used for statistical analysis (P < .05). Results: Cutting of the sMCL led to statistically significant increases in laxity regarding valgus rotation, ER, and anteromedial translation in all tested flexion angles (P < .05). ATT was significantly increased in all flexion angles but not at 60° after cutting of the sMCL. A combined instability of the sMCL and dMCL led to further increased knee laxity in all tested kinematics and flexion angles (P < .05). After reconstruction, the knee kinematics were not significantly different from those of the native state. Conclusion: Insufficiency of the sMCL and dMCL led to excess valgus rotation, ER, ATT, and anteromedial tibial translation. A combined flat reconstruction of the sMCL and the anteromedial aspect restored this excess laxity to values not significantly different from those of the native knee. Clinical Relevance: The presented reconstruction might lead to favorable results for patients with MCL and anteromedial injuries with an anteromedial rotatory knee instability.

Methodology to identify subject-specific dynamic laxity tests to stretch individual parts of knee ligaments

Methodology to identify subject-specific dynamic laxity tests to stretch individual parts of knee ligaments

An Insert Goniometer Can Help Select the Optimal Insert Thickness When Performing Kinematically Aligned Total Knee Arthroplasty with a Medial 1:1 Ball-in-Socket and Lateral Flat Surface Insert and Posterior Cruciate Ligament Retention.

Current surgical practices in total knee arthroplasty (TKA) have advanced and include significant changes and improvements in alignment philosophies, femorotibial implant conformities, and ligament management to replicate in vivo knee kinematics. While corrective measures have emphasized sagittal plane alignment to restore normal flexion-extension (F-E) motion and coronal plane ligament balance, internal-external (I-E) rotation kinematics in the axial plane have been largely neglected. Recent in vivo evidence indicates that the combination of factors necessary to closely restore native tibial rotation as the knee flexes and extends is kinematic alignment (KA), which resurfaces the patient's pre-arthritic knee without releasing ligaments, an insert with medial 1:1 ball-in-socket conformity and a lateral flat surface, and posterior cruciate ligament (PCL) retention. However, the inherent anterior-posterior (A-P) stability provided by the medial 1:1 ball-in-socket limits the surgeon's ability to select the correct insert thickness using manual laxity testing. Accordingly, this review presents the design and validation of an instrument called an insert goniometer that measures I-E tibial rotation for inserts that differ in thickness by 1 mm and uses rotation limits at extension and 90° flexion to select the optimal insert thickness. The optimal thickness is the one that provides the greatest external tibial orientation in extension and internal tibial orientation at 90° flexion without lift-off of the insert.

Reduced Knee Flexion Strength 18 Years After ACL Reconstruction With Hamstring Tendon Versus Patellar Tendon

Background: Bone–patellar tendon–bone (BPTB) and double-looped semitendinosus and gracilis (hamstring) grafts are commonly used for anterior cruciate ligament (ACL) reconstruction. Short-term and midterm studies show little or no differences between the 2 grafts; however, there are only a few long-term studies to compare results between the 2 grafts. Purpose: To compare the results after using either BPTB grafts or hamstring tendon grafts 18 years after ACL reconstruction. Study Design: Randomized controlled trial; Level of evidence 2. Methods: A total of 114 patients with ACL rupture between 2001 and 2004 were randomized to reconstruction with either a BPTB graft or a hamstring tendon graft. Patients were operated on at 4 major hospitals. The 18-year follow-up evaluation included anterior knee laxity measured with a KT-1000 arthrometer, defined as the primary outcome, while clinical examination (Lachman and pivot-shift tests), isokinetic testing of muscle strength, patient-reported outcome measures, and an assessment of radiographic osteoarthritis using the Kellgren-Lawrence classification were defined as secondary outcomes. Results: A total of 96 patients (84%, 47 BPTB and 49 hamstring grafts) were available for follow-up, 71 of these for clinical examination. Seven of 96 patients were excluded for ACL revision (n = 5) or knee replacement (n = 2) surgery. In total, 25 patients (10 BPTB and 15 hamstring grafts) had undergone additional surgery other than ACL revision or total knee arthroplasty. There were no significant differences between the groups in terms of anterior laxity test with KT-1000 arthrometer (primary outcome). In secondary outcomes, no significant differences between groups were reported regarding clinical examination, patient-reported outcome scores, or radiographic osteoarthritis (Kellgren-Lawrence grade 2-4 for patellofemoral joint [18 hamstring and 14 BPTB] or tibiofemoral joint [20 hamstring and 19 BPTB]), while isokinetic testing revealed that the hamstring group had a 10.7% reduction in mean peak flexion torque compared with the BPTB group at 60 deg/s (df = 59; P = .011). At 60 deg/s the mean total flexion work in the hamstring group was reduced by 17.2% compared with the BPTB group (df = 59; P = .002). Conclusion: The flexion strength in the hamstring group was significantly reduced in the operated knee after 18 years. There were no significant differences between the groups regarding subjective outcomes, patient-reported outcomes, range of motion, clinical and instrumented knee laxity, and the development of osteoarthritis. Registration: NCT05876013 (ClinicalTrials.gov identifier).

Modeling of the native knee with kinematic data derived from experiments using the VIVO™ joint simulator: a feasibility study

BackgroundDespite advances in total knee arthroplasty, many patients are still unsatisfied with the functional outcome. Multibody simulations enable a more efficient exploration of independent variables compared to experimental studies. However, to what extent numerical models can fully reproduce knee joint kinematics is still unclear. Hence, models must be validated with different test scenarios before being applied to biomechanical questions.MethodsIn our feasibility study, we analyzed a human knee specimen on a six degree of freedom joint simulator, applying a passive flexion and different laxity tests with sequential states of ligament resection while recording the joint kinematics. Simultaneously, we generated a subject-specific multibody model of the native tibiofemoral joint considering ligaments and contact between articulating cartilage surfaces.ResultsOur experimental data on the sequential states of ligament resection aligned well with the literature. The model-based knee joint kinematics during passive flexion showed good agreement with the experiment, with root-mean-square errors of less than 1.61 mm for translations and 2.1° for knee joint rotations. During laxity tests, the experiment measured up to 8 mm of anteroposterior laxity, while the numerical model allowed less than 3 mm.ConclusionAlthough the multibody model showed good agreement to the experimental kinematics during passive flexion, the validation showed that ligament parameters used in this feasibility study are too stiff to replicate experimental laxity tests correctly. Hence, more precise subject-specific ligament parameters have to be identified in the future through model optimization.

Concurrent Joint Contact in Anterior Cruciate Ligament Injury induces cartilage micro-injury and subchondral bone sclerosis, resulting in knee osteoarthritis.

Anterior Cruciate Ligament (ACL) injury initiates post-traumatic osteoarthritis (PTOA) via two distinct processes: initial direct contact injury of the cartilage surface during ACL injury, and secondary joint instability due to the ACL deficiency. Using the well-established Compression-induced ACL rupture method (ACL-R) and a novel Non-Compression ACL-R model, we aimed to reveal the individual effects of cartilage compression and joint instability on PTOA progression after ACL injury in mice. Twelve-week-old C57BL/6J male were randomly divided to three experimental groups: Compression ACL-R, Non-Compression ACL-R, and Intact. Following ACL injury, we performed joint laxity testing and microscopic analysis of the articular cartilage surface at 0 days, in vivo optical imaging of matrix-metalloproteinase (MMP) activity at 3 and 7 days, and histological and microCT analysis at 0, 7, 14, and 28 days. The Compression ACL-R group exhibited a significant increase of cartilage roughness immediately after injury compared with the Non-Compression group. At 7 days, the Compression group exhibited increased MMP-induced fluorescence intensity and MMP-13 positive cell ratio of chondrocytes. Moreover, histological cartilage degeneration was observable in the Compression group at the same time point. Sclerosis of tibial subchondral bone in the Compression group was more significantly developed than in the Non-Compression group at 28 days. Both Compression and Non-Compression ACL injury initiated PTOA progression due to joint instability. However, joint contact during ACL rupture also caused initial micro-damage on the cartilage surface and initiated early MMP activity, which could accelerate PTOA progression compared to ACL injury without concurrent joint contact.

Return to running criteria after anterior cruciate ligament reconstruction: an online survey of 1404 Italian physiotherapists.

The aim of this study is to study the clinical decision-making practice of Italian physiotherapists in return to running (RTR) after anterior cruciate ligament (ACL) reconstruction, and the differences in decision-making in relation to physiotherapist's characteristics. An online survey was developed, 1404 physiotherapists were contacted by email, via chartered association, or via social media. Most respondents (83%) indicated that the RTR decision should be made by a multidisciplinary team with RTR clearance around 3-4 months after surgery (47%). The most important criteria guiding the RTR decision were knee flexion range of motion (ROM) >130° (50%), complete extension ROM (95%), no pain (45%) and no effusion (68%). A Limb Symmetry Index (LSI) >70% for quadriceps (49%), hamstring (48%) and LSI >90% for posterolateral hip (45%) and triceps surae strength (42%) should be achieved for RTR. Approximately half of the participants (49%) do not consider ACL laxity tests to be used for RTR decisions. Response differences were found between sample subgroups. More experienced physiotherapists and those with post graduate training had lower thresholds to clear RTR. Experienced physiotherapists who treated a higher number of patients after ACL reconstruction, who had certified specialist training and a specific interest towards ACL rehabilitation, generally reported clinical practice modalities more in line with current evidence.

Quadriceps Tendon Autograft ACL Reconstruction With Suture Tape Augmentation: Safe Results Based on Minimum 2-Year Follow-up MRI.

The potential intra-articular effects of ≥1 year after anterior cruciate ligament reconstruction (ACLR) with independent suture tape augmentation (STA) are not fully understood. To investigate whether incorporating suture tape in an all-soft tissue quadriceps tendon autograft (QTA) ACLR leads to satisfactory patient outcomes while having no intra-articular side effects as determined by magnetic resonance imaging (MRI). Case series; Level of evidence, 4. Included were 25 patients with a mean age of 19.9 years (95% CI, 17.3-22.5 years) who underwent QTA ACLR with STA between 2016 and 2019. All patients underwent MRI at ≥1 year postoperatively and had at least a 2-year follow-up (mean, 28 months [95% CI, 26.5-29.5 months]) that included physical examination with anterior laxity testing with KT-1000 arthrometer, radiographs, and patient-reported outcome measures (PROMs). At the final follow-up, the minimal clinically important difference (MCID) and the Patient Acceptable Symptom State (PASS) for applicable PROMs were applied to each patient. Postoperative graft and joint integrity were assessed using the Howell classification and the MRI Osteoarthritis Knee Score (MOAKS) joint effusion/synovitis grade. The Mann-Whitney U test for continuous variables and the chi-square or the Fisher exact test for categorical variables were used for statistical analyses. The MRI assessment of the grafts demonstrated intact grafts in all patients. Overall, 96% of patients demonstrated grades 0 or 1 MOAKS for joint effusion/synovitis. All patient outcomes significantly improved from preoperatively to the final follow-up (P < .001), except for the Marx score, which decreased significantly (14.2 [95% CI, 12.7-15.8] vs 9.72 [95% CI, 7.3-12.2]; P = .0014). At least 68% of the patients achieved the MCID threshold, and 92% achieved the PASS threshold for all applicable PROMs. QTA ACLR with STA did not demonstrate adverse intra-articular changes on MRI at ≥1 year postoperatively. In addition, STA did not appear to negatively affect PROMs.

The effect of trapeziometacarpal joint passive stiffness on mechanical loadings of cartilages

Hypermobility of the trapeziometacarpal joint is commonly considered to be a potential risk factor for osteoarthritis. Nevertheless, the results remain controversial due to a lack of quantitative validation. The objective of this study was to evaluate the effect of joint laxity on the mechanical loadings of cartilage.A patient-specific finite element model of trapeziometacarpal joint passive stiffness was developed. The joint passive stiffness was modeled by creating linear springs all around the joint. The linear spring stiffness was determined by using an optimization process to fit force–displacement data measured during laxity tests performed on eight healthy volunteers. The estimated passive stiffness parameters were then included in a full thumb finite element simulation of a pinch grip task driven by muscle forces to evaluate the effect on trapeziometacarpal loading. The correlation between stiffness and the loading of cartilage in terms of joint contact pressure and maximum shear strain was analyzed.A significant negative correlation was found between the trapeziometacarpal joint passive stiffness and the contact pressure on trapezium cartilage during the simulated pinch grip task.These results therefore suggest that the hypermobility of the trapeziometacarpal joint could affect the contact pressure on trapezium cartilage and support the existence of an increased risk associated with hypermobility.

The Effect of Varying Sizes of Ramp Lesions in the ACL-Deficient and Reconstructed Knee: A Biomechanical Robotic Investigation

Background: Conflicting evidence has been reported regarding the biomechanical relevance of ramp lesions (RLs) on knee kinematics. Furthermore, the influence of the defect size of the RLs on anterior tibial translation (ATT) and external rotation (ER) is currently unknown. Purpose: To evaluate the influence of RL defect size on knee kinematics in anterior cruciate ligament (ACL) deficiency and after simulated ACL reconstruction (sACLR). Study Design: Controlled laboratory study. Methods: Eight cadaveric knee specimens were tested in a 6 degrees of freedom robotic test setup. Force-controlled clinical laxity tests were performed with 200 N of axial compression in 0°, 30°, 60°, and 90° of flexion: 5 N·m internal rotation (IR)/ER torque, 134 N ATT force, and an anteromedial drawer test consisting of 134 N ATT force under 5 N·m ER torque. After determining the native knee kinematics, the ACL was cut at the tibial insertion, followed by a transosseous refixation to simulate a surgical repair or reconstruction (simulated ACL reconstruction; sACLR). An RL was sequentially created with a length of 1, 2, and 3 cm. Each state of the RL was evaluated in the ACL-deficient state and after sACLR. Results: In the ACL-deficient state, only an RL of 3 cm length resulted in a significant increase of ATT in 30° of flexion (mean difference 0.73 mm; 95% CI, 0.36-1.1 mm). After sACLR, an RL had no significant effect. When looking at ER, an RL significantly increased ER in full extension in the ACL-deficient state in 2 cm (mean difference 0.9°; 95% CI, 0.08°-1.74°) and 3 cm length (mean difference 1.9°; 95% CI, 0.57-3.25). Furthermore, a 3-cm RL significantly increased IR in 0° of flexion in the ACL-deficient state (mean difference 1.9°; 95% CI, 0.2°-3.6°). No effect of ramp lesions on rotation was found after sACLR. Conclusion: RLs result in a small increase in ATT, ER, and IR in ACL-deficient knees at early flexion angles, but not after sACLR. Clinical Relevance: Small RLs did not change time-zero knee kinematics and may, therefore, be left untreated, especially when the ACL is reconstructed.

Ulnar-Sided Wrist Pain: A Diagnostic Evaluation Guide From 30-Plus Years of Experience.

While multiple ulnar-sided wrist pain (USWP) diagnostic evaluation guides have been presented, none have included original clinical data or statistical analysis. The purpose of this study is to provide a diagnostic evaluation guide derived from original clinical data and analysis to help clinicians arrive at a differential diagnosis for USWP. Using a computer search of patients presenting with sprains, instability, and laxity of the wrist, 385 patient charts were identified. Patient demographics, mechanism of injury, subjective complaints, physical findings, and diagnostic test findings were reviewed. Statistical analysis was performed to determine sensitivity and specificity of diagnostic methods on their ability to identify lunotriquetral ligament tears, triangular fibrocartilage complex (TFCC) tears, and ulnar impaction syndrome. Diagnostic arthroscopy was used as the reference standard. Ninety-three patients, comprising 101 cases of USWP, were included in the study. The onset of injury was traumatic in 83 out of 101 cases with motor vehicle accidents (N=46) being the most common, followed by overuse (N=18), and a fall onto an outstretched hand (N=16). The ulnocarpal tenderness test exhibited sensitivity/specificity of 72%/33%; lunotriquetral ligament laxity test of 42%/62%; bone scan of 80%/33%; radiocarpal arthrogram of 90%/98% for TFCC tears and 50%/91% for lunotriquetral ligament tears; midcarpal arthrogram of 82%/86% for lunotriquetral ligament tears.The mean ulnar variance on standard posteroanterior view radiograph was 0.95 mm, increasing to 2.67 mm on gripping posteroanterior view. Physicians should suspect a lunotriquetral ligament and/or TFCC tear with the acute onset of USWP following a loaded dorsiflexed mechanism of injury. Ulnocarpal tenderness tests and pre-operative ulnar variance measures are effective for increasing suspicion of USW pathology. Bone scans are helpful in diagnosing ulnar impaction syndrome in conjunction with radiographic findings. A combination of midcarpal arthrogram for lunotriquetral ligament tears and radiocarpal arthrogram for TFCC tears should be employed.

Remnant-Sparing Anterior Cruciate Ligament Reconstruction Results in Similar Clinical, Functional, and Quality-of-Life Outcomes to Anatomic Single-Bundle Anterior Cruciate Ligament Reconstruction

To compare a large cohort of patients who underwent remnant-sparing anterior cruciate ligament reconstruction (rACLR) with a matched group of patients who underwent anatomic single-bundle anterior cruciate ligament reconstruction (ACLR) with respect to clinical laxity, patient-reported outcomes, and functional testing. Patients who underwent rACLR between January 2010 and December 2015 were matched according to age, sex, body mass index, and graft type to patients who underwent ACLR. The primary outcome measure was the ACL Quality of Life (ACL-QOL) score at final follow-up of 24 months. Secondary outcomes included functional tests and clinical laxity measurements at 6, 12, and 24 months postoperatively. Concurrent intra-articular pathology at the time of surgery and postoperative complications were also recorded. Statistical analyses included the dependent t test and the Wilcoxon signed rank test. A total of 210 rACLR patients were successfully matched to a corresponding cohort of 210 ACLR patients. There were no statistically significant differences in ACL Quality of Life (ACL-QOL) or functional testing results between the groups; however, scores in both groups showed a steady and statistically significant improvement over time. A statistically significant difference was noted with respect to the Lachman test findings, favoring the rACLR cohort (Z= -2.79, P= .005); no between-group difference was seen for the pivot-shift test (Z= -0.36, P= .72). The rACLR group had a significantly lower rate of concurrent meniscal and chondral injury. There was no difference in complications between the groups (Z= -0.49, P= .63). There was no difference in patient-reported or functional testing outcomes in patients undergoing remnant-sparing compared with anatomic single-bundle ACLR. There was, however, a significantly lower rate of positive Lachman test findings after rACLR. Furthermore, the rate of concurrent meniscal and chondral pathology was lower in the rACLR group. Level III, retrospective cohort study.

Quantification of the passive behavior of the glenohumeral joint: A biomechanical study

Shoulder stabilization and arthroplasty procedures aim to restore the complex motion innate to the glenohumeral joint relying on proper tensioning of the surrounding soft-tissues at the time of surgery. Joint instability remains a leading cause for revisions of these procedures necessitating a deeper understanding of the passive constraint of the intact glenohumeral joint. The current literature lacks comprehensive analysis of the passive glenohumeral joint in all degrees-of-freedom (DOF). The objective of the present study is to better understand this complex joint by quantifying the passive laxity of the glenohumeral joint in multiple DOFs over a range of motion. Sixteen fresh-frozen cadaveric shoulders were tested in the intact state using a robotic simulator capable of six-DOF motion. The limits of range of motion was quantified in separate laxity tests applying a ± 2 Nm internal-external (IE) torque, ±20 N anterior-posterior (AP) force, ±20 N superior-inferior (SI) force and a 44 N distraction force at six levels of glenohumeral abduction. Overall, glenohumeral joint laxity was greatest between 15° and 45° of abduction except for SI translation which increased with abduction. IE rotation and AP translation were dominated by external rotation and anterior translation, respectively. Although early abduction and late abduction produced similar laxities, the increase in laxity in the mid abduction range indicates it is important to assess the shoulder joint throughout the range of motion and not just at these two end points. The presented laxity data establishes a baseline for intact shoulder laxity over a range of motion in multiple DOFs under known loading conditions.

Arthroscopic-Assisted Lateral Extra-Articular Tenodesis With Knotless Anchor Fixation

Recent studies have reported the biomechanical and clinical advantages of lateral extraarticular augmentation procedures including the modified lateral extra-articular tenodesis (LET) in the setting of anterior cruciate ligament reconstruction. LET has been shown to significantly decrease re-rupture rates in high-risk patients and decrease anterior cruciate ligament graft forces during pivoting loads and instrumented anterior laxity testing. Many variations of the modified LET approaches have been described. However, concerns including lateral hematoma, wound-healing complications, and increased operative time exist. This minimally invasive, arthroscopic-assisted approach using a knotless, all-suture anchor allows for direct visualization through a 2-cm incision and inherently decreases the morbidity associated with traditional LET techniques.

Biomechanical analysis of ligament modelling techniques in TKA knees during laxity tests using a virtual joint motion simulator

Total knee arthroplasty (TKA) is an end-stage treatment for knee osteoarthritis that relieves pain and loss of mobility, but patient satisfaction and revision rates require improvement. One cause for TKA revision is joint instability, which may be due to improper ligament balancing. A better understanding of the relationship between prosthesis design, alignment, and ligament engagement is necessary to improve component designs and surgical techniques to achieve better outcomes. We investigated the biomechanical effects of ligament model complexity and ligament wrapping during laxity tests using a virtual joint motion simulator. There was little difference in kinematics due to ligament complexity or ligament wrapping.

A New Algorithm to Treat Chronic Combined ACL/MCL Injuries: Let's Come Back to the “Rotatory Instability Test”

Background: Chronic combined medial collateral ligament (MCL) and anterior cruciate ligament (ACL) injuries are frequent. Medial residual laxity is a risk factor for ACL rerupture. It should be treated at the same time as the ACL reconstruction (ACLR) if necessary, but there are still questions surrounding the indications for abstention or surgery of the medial plan, especially for grade 2 MCL injuries of the Fetto and Marshall classification. Indications: The purpose is to come back to a simple test, the “Rotatory Instability Test” as described by Slocum and Larson in 1968 for systematic clinical examination of the knee to improve the sensitivity and accuracy of the deep MCL (dMCL) and superficial MCL (sMCL) examination and to propose a decision-making algorithm for the treatment of the chronic combined ACL/MCL injuries based on the assessment of anteromedial rotatory instability (AMRI). Technique Description: Examination of the ACL with Lachman test, anterior drawer in neutral rotation, and pivot shift test confirm the ACL injury. Valgus laxity is tested in extension and at 20° of flexion. Then, an anterior drawer test at 90° of flexion with external rotation is done (the anterior drawer in external rotation [ADER] test) allowing to identify isolated dMCL, dMCL + sMCL, or MCL + posterior oblique ligament (POL) injuries. Discussion: As persistent medial laxity is a risk factor for ACL graft failure and there is no reliable method of instrumented laxity assessment, careful clinical examination remains essential. Systematic examination of the medial side with valgus laxity testing at 0° and 20° flexion combined with the ADER test assessment of AMRI can guide treatment of the MCL injury component. Where there is no valgus laxity and the ADER test is negative, isolated ACLR is indicated. If there is significant medial laxity at 0°, this suggests combining sMCL and POL reconstruction with ACLR. Where the knee is stable at 0° but there is valgus laxity at 20° and a positive ADER test, the dMCL can be reconstructed using a gracilis graft or a combined sMCL and dMCL reconstruction can be added to the ACLR depending on the degree of laxity. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

Calibration of Holzapfel-Gasser-Ogden collateral ligament properties in a hybrid post-arthroplasty knee joint model for laxity testing

Knee collateral ligaments play a vital role in providing frontal-plane stability in post-total knee arthroplasty (TKA) knees. Finite element models can utilize computationally efficient one-dimensional springs or more physiologically accurate three-dimensional continuum elements like the Holzapfel-Gasser-Ogden (HGO) formulation. However, there is limited literature defining subject-specific mechanical properties, particularly for the HGO model. In this study, we propose a co-simulation framework to obtain subject-specific material parameters for an HGO-based finite element ligament model integrated into a rigid-body model of the post-TKA knee. Our approach achieves comparable accuracy to spring formulations while significantly reducing coefficient calibration time and demonstrating improved correlation with reference knee kinematics and ligament strains throughout the tested loading range.

The Anterior Fibers of the Superficial MCL and the ACL Restrain Anteromedial Rotatory Instability

Background: There is limited knowledge about how the anterior cruciate ligament (ACL) and capsuloligamentous structures on the medial side of the knee act to control anteromedial rotatory knee instability. Purpose: To investigate the contribution of the medial retinaculum, capsular structures (anteromedial capsule, deep medial collateral ligament [MCL], and posterior oblique ligament), and different fiber regions of the superficial MCL to restraining knee laxity, including anteromedial rotatory instability. Study Design: Controlled laboratory study. Methods: Eight fresh-frozen human cadaveric knees were tested using a 6 degrees of freedom robotic testing system in a position-controlled mode. Loads of 10 N·m valgus rotation, 5 N·m tibial external rotation, 5 N·m tibial internal rotation, and 134 N anterior tibial translation in 5 N·m external rotation were applied at different flexion angles. The motion of the intact knee at 0° to 120° of flexion was replicated after sequential excision of the sartorial fascia; anteromedial retinaculum; anteromedial capsule; anterior, middle, and posterior fibers of the superficial MCL; the deep MCL; the posterior oblique ligament; and the ACL. The reduction in force/torque indicated the contribution of each resected structure to resisting laxity. A repeated-measures analysis of variance with a post hoc Bonferroni test was used to analyze the relative force and torque changes from the intact state. Results: The superficial MCL was the most important restraint to valgus rotation from 0° to 120° and provided the largest contribution to resisting external rotation between 30° and 120° of knee flexion, gradually increasing from 25.2% ± 7.4% at 30° to 36.9% ± 15.4% at 90°. The posterior oblique ligament contributed significantly to resisting valgus rotation only in extension (17.2% ± 12.1%) but was the major restraint to internal rotation at 0° (46.7% ± 13.1%) and 30° (30.4% ± 17.7%) of flexion. The sartorial fascia and anteromedial retinaculum resisted ER at all knee flexion angles (P < .05) and was the single most important restraint in the extended knee (19.5% ± 11%). The capsular structures (anteromedial capsule and deep MCL) had a combined contribution of 20% ± 11.5% at 0° and 23.4% ± 10.5% at 120° of knee flexion but were less important from 30° to 90°. The ACL was the primary restraint to anterior tibial translation in external rotation between 0° and 60° of flexion (50.2% ± 16.9% at 30°), but the superficial MCL was more important at 90° to 120° of knee flexion (36.8% ± 16.4% at 90°). The anterior, middle, and posterior regions of the superficial MCL contributed differently to the simulated laxity tests. The anterior fibers were the most important part of the superficial MCL in resisting external rotation and combined anterior tibial translation in external rotation. Conclusion: The superficial MCL not only was the primary restraint to valgus rotation throughout the range of knee flexion but also importantly contributed to resisting anterior tibial translation in external rotation, particularly in deeper flexion in the cadaveric model. The anterior fibers of the superficial MCL are the most important superficial MCL fibers in resisting anterior tibial translation in external rotation. This study suggests that a medial reconstruction that reproduces the function of the posterior MCL fibers and posterior oblique ligament may not best control anteromedial rotatory instability. Clinical Relevance: Based on these data, there is a need for an individualized medial reconstruction to address different types of medial injury patterns and instabilities.

Nonoperative Treatment for Traumatic Partial Graft Rupture After Anterior Cruciate Ligament Reconstruction: A 2-Year Follow-up Study.

There are no studies on the nonoperative treatment of traumatic partial anterior cruciate ligament (ACL) graft rupture. The purpose of this study was to compare the clinical and radiological outcomes and failure rates between nonoperative treatment and revision ACL reconstruction for traumatic partial ACL graft rupture. We hypothesized that the outcomes and failure rates would be comparable and that nonoperative treatment of traumatic partial ACL graft rupture can produce satisfactory outcomes. Cohort study; Level of evidence, 3. We retrospectively evaluated 2114 patients treated for isolated ACL rupture between January 2000 and June 2020. Patients with traumatic partial graft rupture after ACL reconstruction with minimum 2-year follow-up data were included. Patients who met all the following conditions were candidates for nonoperative treatment: (1) Lachman or pivot-shift grade 0 or 1 at 6 months after ACL reconstruction, (2) ACL graft with low to intermediate signal intensity on 1-year postoperative magnetic resonance imaging (MRI), and (3) MRI after reinjury showing definite evidence of trauma, some fibers remaining in continuity of the ACL graft, and no anterior tibial subluxation in the sagittal plane. The patients were divided into 2 groups according to treatment method: nonoperative treatment (group A) and revision ACL reconstruction (group B). Clinical scores, laxity test results, radiological outcomes, and graft failures were compared between the groups. In total, 47 patients had traumatic partial graft rupture (group A, n = 10; group B, n = 37). There were no significant differences between the 2 groups in terms of clinical scores, laxity tests, radiological outcomes, or graft failure. The clinical and radiological outcomes of nonoperative treatment of traumatic partial graft rupture after ACL reconstruction were comparable with those of revision ACL reconstruction. Nonoperative treatment of traumatic partial ACL graft rupture can produce satisfactory outcomes in selected patients.

Ligaments Laxity and Elongation at Injuryin Flexed knees during Lateral Impact Conditions.

The knee is one of the regions of interest for pedestrian safety assessment. Past testing to study knee ligament injuries for pedestrian impact only included knees in full extension and mostly focused on global responses. As the knee flexion angle and the initial ligament laxity may affect the elongation at which ligaments fail, the objectives of this study were (1) to design an experimental protocol to assess the laxity of knee ligaments before measuring their elongation at failure, (2) to apply it in paired knee tests at two flexion angles (10 and 45 degrees). The laxity tests combined strain gauges to measure bone strains near insertions that would result from ligament forces and a custom machine to exercise the knee in all directions. Failure was assessed using a four-point bending setup with additional degrees of freedom on the axial rotation and displacement of the femur. A template was designed to ensure that the two setups used the exact same starting position. The protocol was applied to six pairs of knees which were tested until the failure of all ligaments. In the laxity tests, a higher compliance of the knee was observed at 45 degrees compared to 10 degrees. Minimum lengths associated with the beginning of bone loading were also successfully identified for the collateral ligaments, but the process was less successful for the cruciate ligaments. The failure tests suggested increased elongation and length at failure for the ligaments and their bundles at 45°. This could be consistent with the higher compliance in static test, but the minimum lengths identified on the collaterals did not explain this difference during failure. The results highlight the possible relationship between position, laxity and elongation at failure in a lateral loading and provide a dataset including 3D coordinates of insertions to continue the investigation using a modelling approach. Perspectives are also outlined to improve upon the laxity determination protocol.