Lattice Parameters Research Articles

Pressure induced tunable physical properties of cubic KHgF3 fluoro-perovskite: A first principle study

The structural, electronic, optical, mechanical, and thermodynamic properties of KHgF3 perovskite under various hydrostatic pressures are examined in this study in the frameworkof Density Functional Theory (DFT) with the Generalized Gradient Approximation (GGA) Perdew-Burke-Ernzerhof (PBE) exchange–correlation function. Tunable physical properties have been observed in KHgF3 as pressure is incrementally applied. The investigated compound displays mechanical instability beyond the pressure range of 0 to –10 GPa, as confirmed by the elastic constant analysis. Under ambient pressure, the lattice constants of KHgF3 closely align with theoretically calculated values, affirming the accuracy of this investigation. In addition, the bandgap of KHgF3 narrows with increasing pressure, facilitating easier electron transition from the valence band to the conduction band. The study reveals that when subjected to different hydrostatic pressures, fluctuations are observed in the peaks of the conductivity spectrum, loss spectrum, and absorption spectrum, particularly shifting towards higher photon energies, as analyzed through the optical properties. Moreover, KHgF3 exhibits ductile behavior at 0 GPa pressure, and this ductility rises with pressure. Thermodynamic analysis reveals a decrease in Debye temperature with increasing pressure, while the melting temperature rises correspondingly. The findings of this investigation also imply that KHgF3 can be a good candidate for optoelectronic device application under different hydrostatic pressures.

One-pot synthesis of transition metals-doped LiAl-LDHs to improve lithium adsorption performance and stability

Transition metal doping of Li/Al-LDHs can alter the interlayer spacing and surface charge of LDHs, thereby enhancing adsorption performance and stability. To investigate the rules and mechanisms governing the enhancement of stability and adsorption capacity of Li/Al-LDHs through transition metal element doping, several transition metal elements (Co, Zn, Mn, Zr, and Ni) were selected, and the five types of transition metal-doped Li/Al-LDHs and one undoped Li/Al-LDHs were synthesized by a one-pot method. Compared to the original Li/Al-LDHs, the Co-doped Li/Al-LDHs exhibited higher adsorption capacity, lower dissolution loss, and greater stability. Additionally, after Co doping, the lattice constant of Li/Al-LDHs decreases, effectively reducing the intercalation energy and increasing lithium diffusion efficiency. When used for lithium adsorption, Co-Li/Al-LDHs exhibited a Li+ capacity of 12.6 mg/g and reached saturation adsorption within 90 min. Notably, Co-Li/Al-LDHs achieved a high Li+ adsorption capacity (6.46 mg/g) in East Taigener salt-lake brine. After 10 cycles, the adsorption capacity did not show any significant change, and after 336 h adsorption-desorption cycles (200 rmp, oscillation), the total Al dissolution loss was only about 0.035 ‰, demonstrating that Co doping can enhance the interlayer binding force of Li/Al-LDHs, thereby reducing the decomposition of the layered structure in solution, lowering aluminum dissolution loss, and improving structural stability. The results show that doping with transition metals can reduce the Al dissolution rate of LDHs, and Co-Li/Al-LDHs can be used as an efficient adsorbent for lithium extraction from salt lake and have higher stability.

New low elastic modulus equimassic βeta Ti-Nb-Zr-(Ta-Mo) multiprincipal alloys

The increasing life expectancy, evolving patient demographics, and advancements in implant technologies underscore the need for better biomaterials, particularly alloys with superior mechanical and chemical biocompatibility for biomedical applications like orthopedic implants. β-Ti alloys are promising due to their mechanical properties, including an elasticity modulus (E) of 44–80 GPa, and chemical/biological attributes such as corrosion resistance and osseointegration. This work developed equimassic multicomponent high (HEA) and medium entropy (MEA) β-Ti alloys within the ternary Ti-33Nb-33Zr, quaternary Ti-25Nb-25Zr-25Ta, and quinary Ti-20Nb-20Zr-20Ta-20Mo weight percent systems to achieve an optimized elastic modulus. The study analyzed β-Ti alloys with different β-stabilizing elements, leading to varying entropy levels, and established a relationship between microstructure and properties for enhanced implant efficacy. For the high entropy quinary alloy, increasing the number of alloying elements decreases lattice parameters, increasing the elastic modulus and Vickers microhardness (HV), from 247 HV for the ternary alloy to 453 HV for the quinary alloy. This corresponds to an increase in the entropy degree from 1.041 R to 1.523 R. While a higher entropy degree hinders a low elastic modulus, medium entropy β-Ti alloys such as the quaternary β-Ti-25Nb-25Zr-25Ta alloy achieve an elastic modulus as low as 73 GPa.

Multiple high-Q resonances from mirror-coupled dielectric arrays

This paper reports how high-Q resonances can be created at multiple designated wavelengths in a low-index-contrast dielectric nanoparticle array coupled with a metal mirror. A rectangular array of TiO2 nanoparticles over a silver film (separated by a SiO2 spacer layer) can support collective resonances of magnetic and electric dipoles with their wavelengths determined mainly by the lattice spacings of the rectangular lattice. These resonances can be modulated by the spacer layer thickness to form accidental bound states in the continuum. Furthermore, resonances related to the periodicity along the diagonal of the rectangular unit cell can be produced by perturbing the lattice through modifying the dimensions of adjacent nanoparticles in the unit cell. Our result expands the potential of lattice resonances in low-index-contrast dielectric lattices, making them promising for applications in compact multi-wavelength and unidirectional light-emitting devices.

Unveiling the anticancer potential: Exploring 4-fluoro benzoic acid and piperazine through spectroscopic, X-ray diffraction, DFT and molecular docking analysis

The crystalline substance formed from piperazine and 4-fluorobenzoic acid (PZ-PFBA) was successfully synthesized. This synthesis involved the transfer of protons between the selected acid and base, resulting in the formation of distinct crystalline salt. The SCXRD analysis conforms the salt crystallized in a monoclinic crystal system with a P 21/c space group and lattice parameters are a = 13.0688(14) Å, b = 8.2686(8) Å, and c = 8.2552(9) Å. Hirshfeld surface analysis, a technique for quantifying molecular interactions, was employed to investigate the prepared crystalline salt. Additionally, the salt was subjected to further examination using FT-IR, 1H NMR, 13C NMR, and SCXRD studies. The crystalline salt has major and established biological actions that inhibit the human lung cancer cell line A549. In vitro, and Insilico anticancer tests show that PZ-PFBA has better efficacy against the human cervical cancer cell line (HeLa) and in bioinformatics analysis. PZ-PFBA demonstrated more efficacy in reducing pathogenic strains compared to its parent reactants.

Coulomb Drag in Graphene/h-BN/Graphene Moiré Heterostructures.

We report on the observation of Coulomb drag between graphene-hexagonal boron nitride (h-BN) moiré heterostructure with a moiré wavelength of ∼14 nm and an intrinsic graphene with a lattice constant of ∼0.25 nm. By tuning carrier densities of each graphene layer independently, we find that charge carriers in moiré minibands, i.e., near satellite Dirac point (sDP), can be coupled with massless Fermions near the original Dirac point (oDP), strongly enough to generate a finite drag resistivity. At high temperature (T) and large density (n), the drag resistivities near both oDP and sDP follow a typical n^{-α} (α=1.3-1.7) and T^{2} power law dependence as expected for the momentum transfer process and it also satisfies the layer reciprocity. In contrast, at low T, the layer reciprocity is broken in both oDP-oDP and sDP-oDP coupled regions that suggest dominant energy drag. Furthermore, quantitatively, the drag resistivities near sDPs are smaller than those near oDP and they deviate from T^{2} dependence below ∼100 K. Our work demonstrates that the drag experiment can be used to investigate the coupling between the carriers in moiré minibands and those in original Dirac bands which can be extended to other moiré materials.

Magnetocaloric and Magnetostrictive Properties of the Tb(Co,In)<sub>2</sub> Laves Phases

Multicomponent polycrystalline TbInxCo2–x (with х = 0–0.2) solid solutions are prepared for the first time, and their crystal structure and magnetic, magnetocaloric, and magnetostrictive properties are studied. X-ray diffraction patterns taken at room temperature demonstrate mainly the presence of the cubic C15 Laves phase in all samples. As the indium content increases to x = 0.1, the lattice parameter is found to increase; the further increase in the indium content to х = 0.2 leads to a decrease in the lattice parameter. In this case, the Curie temperature TC monotonically increases to 245 K. The isotheral magnetic entropy change ΔSmag is calculated in accordance with magnetic measurements using the thermodynamic Maxwell’s relation. At a magnetic field change from 0 to 1.8 T, the maximum entropy change monotonically decreases and, for composition with x = 0.2, is 1.8 J/(kg∙К). As the indium content increases to x = 0.05, the volume magnetostriction increases. The further increase in the indium concentration leads to the decrease in the peak values and their shift to high temperatures.

CALCULATION OF ELECTRONIC PROPERTIES OF LiBX3 (B = Pb AND Sn; X = Br, Cl AND I) CUBIC PHASE BY DENSITY FUNCTIONAL THEORY

Perovskite solar cells utilize perovskite as the active material to convert sunlight into electrical energy. Perovskite is a compound with a crystal structure of ABX₃, where A and B are cations, and X is an anion, usually a halide. Research continues to find perovskites with high efficiency. This efficiency is related to the electronic structure, which can be analyzed using Density Functional Theory (DFT). In this study, the electronic structure of cubic phase LiBX₃ perovskites (B = Pb and Sn; X = Br, Cl, and I) is investigated using Quantum ESPRESSO software. Various parameters such as cut-off energy, k-points, and lattice constants were modified to obtain optimal values. From the optimization results, the band gap, DOS, and PDOS values for the six perovskites were obtained. The resulting band gap energy (Eg) are LiPbBr₃ at 1,71 eV, LiPbCl₃ at 1,87 eV, LiPbI₃ at 1,43 eV, LiSnBr₃ at 0,51 eV, LiSnCl₃ at 0,65 eV, and LiSnI₃ at 0,28 eV. These results show that the band gap energy values increase with the change in atomic radius from Sn to Pb and decrease with the change in atomic radius from Cl, Br to I. The electronic structure calculations of LiBX₃ (B = Pb and Sn; X = Br, Cl, and I) show semiconductor properties that have the potential to be used as light-absorbing materials in perovskite solar cells. This study states that LiBX₃ has great potential in solar cell applications and offers a deep understanding of the relationship between crystal structure and its electronic properties.

The role of BaTiO3 nanoparticles as photocatalysts in the synthesis and characterization of novel fruit dyes is investigated.

In the present work, the photocatalytic activity against the natural dye extracted from the novel fruits has been studied by the BaTiO3 nanoparticles (NPs) under a ultra-violet (UV) light source. The large concentrations of an essential phenolic agent present in this phytochemical extract superimposed with cloths fibers make strong stain and degrade into another form of toxic, which is excluded from the many textiles industries as the colorful waste waters without recycling and removal of that dye pigments have been investigated using both photodegradation and photoluminescence techniques. The entitled nanoparticles (NPs) were prepared using the soft chemical root-modified solvothermal synthesis combo method and exposure to heat treatment such that the annealing process has been done for different temperatures ranging from 100°C to 250°C. As for as concern the characterization, as a start, structural and morphology studies have been reported here that highly crystalline oriented peaks data using powder x-ray diffraction techniques (PXRD) as well as the surface morphology including the size, shape, and mass distribution using the field emission scanning electron microscopy (FESEM) techniques, which purely belong to rutile tetragonal structure of the crystal system and circular and noncircular flakes like rough surface morphology materials respectively. The lattice dissociation constant 'ε' value of the BaTiO3 NPs has determined to be ~2.71 × 10-3 using the Williamson-Hall (W-H plot) analysis of crystallographic data. In the UV visible spectroscopy findings, since the extreme quantum confinement of BaTiO3 nanoflakes/nanodisc, the optical energy bandgap has been estimated to be a range of 1.98 to 2.67 eV (~2.48 eV) found from the Tauc plot analysis, which contributes to the significantly owing to the enhanced photocatalytic efficiency with excellent performance along exciton formation, superoxide ions, and hydroxyl free radicals generations under UV-vis light irradiation resulting in efficient degradation of typical novel fruit organic dye. Photoluminescence spectra observed at room temperature and low temperature have been observed for the BaTiO3 nanoflakes, which exhibit the blue emission due to the crystalline defects such as the appearance of Ba vacancies leads to the conceivable beginning of p-type conductivity and the origination of free exciton emission reveals the direct bandgap transition nature of nanoflakes. RESEARCH HIGHLIGHTS: According to our findings, 89.71% of the natural syzygium cumin is degraded by photocatalysis reaction. As a plausible mechanism for the destruction of natural dyes under solar light, photocatalytic destruction has been proposed. The reaction between these reactive free radical species leads to high efficiency photodegradation with a short decay time. In addition to water treatment and environmental cleaning applications, the excellent performance of this photocatalyst makes it a promising candidate for other applications. Hence, the synthesized BaTiO3 nanoflakes showcase a highly significant advancement towards the development of a textiles dye recycling method.

Screening Na-Excess Cation-Disordered Rocksalt Cathodes with High Performance.

The practical application of Na-ion cathode materials is currently restricted by their low energy density and sluggish dynamics, while the cation-disordered rocksalt (DRX) structures offer a possible solution to the challenge. In this study, among the 24 candidates containing d0 elements, we use mixing temperature as a descriptor to screen the synthesizable Na-excess DRX, and we have identified Na1.2Mn0.4Mo0.4O2 as the most promising candidate that exhibits a Na percolating fraction of 53%, which is higher than that of Li1.2Mn0.4Ti0.4O2 (35%) proposed in the previous study due to the larger lattice constant in Na-excess DRX cathodes. More importantly, Na1.2Mn0.4Mo0.4O2 is predicted to have a capacity of 228 mAh/g with an energy density of 552 Wh/kg derived from percolation theory and cluster-expansion Monte Carlo simulations, which is higher than that of Na1.3Nb0.3Mn0.4O2 and Na1.14Mn0.57Ti0.29O2 synthesized recently. For a better understanding, the redox mechanism is explored, which involves Mo4+/Mo6+, Mn3+/Mn4+, and O2-/On- (0 < n < 2), indicating the participation of anionic redox. Meanwhile, the Na+ diffusion prefers a divacancy mechanism via an o-t-o diffusion channel with a low diffusion barrier of 0.29 eV. This study expands the family of DRX for the cathode of Na-ion batteries with enhanced performance.

Optimization of Crystal Structures in Polylithionite Concentrate: A Molecular Dynamics Approach to Lithium Extraction Efficiency.

Molecular dynamics (MD) techniques offer significant potential for optimizing mineral extraction processes by simulating economically or physically restrictive conditions at the laboratory level. Lithium, a crucial metal in the electromobility era, exemplifies the need for ongoing re-evaluation of extraction techniques. This research aims to simulate the crystal structures of mineral species present in a polylithionite mineral concentrate [KLi2Al(Si4O10)(F,OH)2] using crystallographic data obtained from X-ray diffraction analysis. This study focuses on optimizing these structures, validating them through density comparisons, and determining the interaction parameter between the identified phases and lithium oxide (Li2O). The X-ray diffraction analysis revealed five predominant mineral phases: quartz (SiO2), calcite [Ca(CO3)], pyrite (FeS2), cassiterite (SiO2), and a compound Pb6O2(BO3)2SO4. Structural data, including lattice parameters, space groups, and atomic coordinates, were used to construct the crystal structures with Materials Studio 8.0, employing the Crystal Builder module. Optimization was performed using the Forcite module with the Smart optimization algorithm and the Universal force field. The interaction parameter (χ) indicated an affinity between lithium oxide and pyrite, as well as between calcite and quartz.

Microstructural Insights and Composition Analysis of a Fractured Brass Alloy of Unknown Composition Using Advanced Characterization Techniques

This study aims to investigate the microstructural and compositional characteristics of a fractured brass alloy using energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The brass alloy, initially of unknown composition, was determined to consist of 63.65 at% Cu, and 36.35 at% Zn through EDS analysis. Microstructural analysis via SEM revealed a typical ductile fracture pattern with necking and dimple formation, indicative of significant plastic deformation prior to failure. The alloy exhibited a grain size ranging from 10 µm to 80 µm and displayed both α-phase (FCC structure) and possible traces of β-phase, though XRD detected only the α-phase due to the low concentration of β-phase (&lt;5%). A comparison between EDS and XRD results for analyzing chemical composition showed that good assumptions could be made from the lattice parameters of the binary alloy following Nelson-Relay function to predict an approximate composition in binary alloy systems, which was found to be 34 at% Zn in our analysis. Furthermore, the sample’s crystal structure was confirmed as FCC, which supported its observed ductility and plastic deformation prior to fracture. The SEM analysis also confirmed that the material went through an annealing process. The fracture morphology further showed that the FCC structure and the annealing process both contributed to the material’s increased ductility. The analysis further confirms that EDS is more reliable for chemical composition determination in an alloy system. Evidence of annealing twinning in the SEM images suggests the sample underwent an annealing process, contributing to its enhanced ductility.

Enabling Interfacial Lattice Matching by Selective Epitaxial Growth of CuS Crystals on Bi2WO6 Nanosheets for Efficient CO2 Photoreduction into Solar Fuels.

Photocatalytic CO2 reduction serves as an important technology for value-added solar fuel production; however, it is generally limited by interfacial charge transport. To address this limitation, a two-dimensional/two-dimensional (2D/2D) p-n heterojunction CuS-Bi2WO6 (CS-BWO) with highly connected and matched interfacial lattices was designed via a two-step hydrothermal tandem synthesis strategy. The integration of CuS with BWO created a robust interface electric field and provided fast charge transfer channels due to the work function difference, as well as highly connected and matched interfacial lattices. The p-n heterojunctionpromotedelectron transfer from the Cu to Bi sites, leading to coordination of Bi sites with high electronic density and low oxidation state. The Bi sites in BWO nanosheets facilitated the adsorption and activation of CO2, and generation of high-coverage key intermediate b-CO32-, while broad light-harvesting CuS (CS)provide abundant photoinduced electrons that were injected into the conduction band of BWO for CO2 photoreduction reaction. Remarkably, the p-n heterojunction CS-BWO exhibited CO and CH4 yields of 135.7 and 62.5 µmol g-1, respectively, which were significantly higher than those of CS, BWO, and physical mixture CS-BWO nanosheets. This work provided an innovative design strategy for developing high-activity heterojunction photocatalyst for converting CO2into value-added solar fuels.

Ce-Doped Iron Oxide Anticorrosive Coatings: Effect of c(Ce4+):c(Fe3+) Ratio on Structure, Morphology, and Coating Anticorrosion Performance

Utilizing hydrothermal methods, Ce-doped iron oxide nanoparticles were synthesized from precursor solutions under different c(Ce4:c(Fe3+) precursor solutions. The effects of the c(Ce4+):c(Fe3+) ratio in the precursor solutions on the nanoparticle morphology and nanoparticle structure of the Ce-doped iron oxide were investigated using X-Ray diffraction, transmission electron microscopy, and scanning electron microscopy. Fourier transform infrared spectroscopy (FTIR) was used to examine the bond energy strength of the Ce-doped iron oxide nanoparticles. The electrochemical properties of the Ce-doped iron oxide nanoparticles were tested using an electrochemical workstation and a saltwater immersion resistance test. The corrosion resistance of Ce-doped iron oxide coatings at different c(Ce4+):c(Fe3+) ratios was systematically analyzed, uncovering corrosion resistance mechanisms and self-healing capabilities. The results show that as the c(Ce4+):c(Fe3+) ratio decreases, the lattice constants of the samples increase along with the average grain size. Both smaller and larger c(Ce4+):c(Fe3+) ratios are detrimental to lattice distortion in α-Fe2O3. The reduced number of valence electrons provided by cerium ions in Ce-doped iron oxide hinders the generation of holes and exerts a minor influence on the crystal band structure, leading to weaker electrochemical stability. The Ce-doped iron oxide coating prepared at a c(Ce4+):c(Fe3+) ratio of 1:60 readily generates a higher number of reactive hydroxyl radicals during corrosion, thus exhibiting enhanced self-healing capabilities and corrosion resistance.

Growth of L-asparagine monohydrate organic single crystals: An experimental and DFT computational approach for nonlinear optical applications

Good optical quality of L-asparagine monohydrate (C4H8N2O3.H2O) organic single crystal has been grown by adopting natural slow evaporation process at room temperature from aqueous solutions. The lattice parameters obtained by powder X-ray diffraction data revealed orthorhombic crystal system of the harvested crystal. The morphology and planes of the crystal have been identified. The molecular vibrations and functional groups have been specified by Fourier transform infrared (FTIR) spectroscopy studies. Energy dispersive X-ray (EDX) study has been availed to find out the elements constituting the crystal. Scanning electron microscopy, (SEM), provided the surface morphology of the crystal. The dependence of dielectric properties on frequency and temperature have been investigated and the electronic polarizability (α) has been determined. UV–vis spectral analysis shows that the crystal possesses good optical transmittance in the visible part of the energy spectrum. The optical band gap and the Urbach energy have been determined from lower absorption edge. Third order nonlinear susceptibility χ(3), nonlinear refractive index (n2), and linear susceptibility χ(1) have been calculated by Miller's generalized rule. The first-principle computation of band structure of electrons and the electron density of states have been discussed, which suggest that the crystals possess direct band gap. Density Functional Theory (DFT) with B3LYP function by Gaussian09W software was utilized to calculate HOMO-LUMO energy gap as well as non-linear optical parameters namely, linear polarizability (α), hyperpolarizability (β and γ) and dipole moment (μ) of L-asparagine monohydrate crystal. All the findings prove that L-asparagine monohydrate is a promising NLO crystal.

Particle-Hole Asymmetric Ferromagnetism and Spin Textures in the Triangular Hubbard-Hofstadter Model

In a lattice model subject to a perpendicular magnetic field, when the lattice constant is comparable to the magnetic length, one enters the “Hofstadter regime,” where continuum Landau levels become fractal magnetic Bloch bands. Strong mixing between bands alters the nature of the resulting quantum phases compared to the continuum limit; lattice potential, magnetic field, and Coulomb interaction must be treated on equal footing. Using determinant quantum Monte Carlo and density matrix renormalization group techniques, we study this regime numerically in the context of the Hubbard-Hofstadter model on a triangular lattice. In the field-filling phase diagram, we find a broad wedge-shaped region of ferromagnetic ground states for filling factor ν≤1, bounded below by filling factor ν=1 and bounded above by half filling the lowest Hofstadter subband. We observe signatures of SU(2) quantum Hall ferromagnetism at filling factors ν=1 and ν=3. The phases near ν=1 are particle-hole asymmetric, and we observe a rapid decrease in ground-state spin polarization consistent with the formation of skyrmions only on the electron doped side. At large fields, above the ferromagnetic wedge, we observe a low-spin metallic region with spin correlations peaked at small momenta. We argue that the phenomenology of this region likely results from exchange interaction mixing fractal Hofstadter subbands. The phase diagram derived beyond the continuum limit points to a rich landscape to explore interaction effects in magnetic Bloch bands. Published by the American Physical Society 2024

Enhancing optical properties of Ba-Ni ferrite through nonmagnetic ion doping for sustainable green technologies and renewable energy applications

Barium ferrite powder was produced using a standard ceramic procedure, and its structure and optical properties were investigated. X-ray diffraction analysis (XRD) showed that the powder had a w-type hexagonal structure. The crystallite size was at approximately 35–36 nm, with bulk density and lattice constants increasing as zinc concentration rose. Conversely, X-ray density and porosity decreased with the increasing zinc concentration. This material has useful optical properties, as well as the standard ferrimagnetic properties of barium ferrite, which make it suitable for use in recording media. Ferrimagnetic behavior, which is useful for recording media, occurs because the powder's crystallites have their unit cell axes aligned. Up to the near-infrared part of the spectrum, the powder was found to have a very low absorption coefficient. Both of these properties—an arrangement that gives rise to ferrimagnetism and a corresponding low optical density—make barium ferrite very attractive for high-density recording and microwave applications. Fourier transform infrared spectra of the samples were recorded in the wavenumber range of 400–4000 cm−1 and supported the X-ray diffraction findings by confirming the idea of the formation of W-type hexagonal ferrite by the presence of two prominent peaks at 454 and 591 cm−1 in the FTIR spectra. Zinc addition was also found to enhance the optical properties of the material. The UV–VIS analysis confirms that the band gap energy of Ba-Ni ferrite was indeed reduced by zinc doping. Values decrease from 3.34 eV to 3.20 eV for direct transitions and from 2.96 eV to 2.79 eV for indirect transitions, using Tauc equation. That means that zinc doping enhances the optical properties of Ba ferrite without affecting the hexagonal structure of Ba-Ni ferrite. Moreover, key parameters of optical performance such as the dielectric constant, the extinction coefficient, the penetration depth, and the refractive index show a dramatic increase with a rise in zinc concentration. These attributes make zinc-doped Ba-Ni ferrite a promising optoelectronic material. The material also showed high absorbance in the wavelengths ranging from 334 to 338 nm, which makes it good for the solar cell applications. Overall, zinc-doped Ba-Ni ferrite is a good candidate for sustainable and renewable energy applications. Our study of the optical properties of barium ferrite up to the near-infrared part of the spectrum demonstrated that the powdered material has a very low absorption coefficient. Indeed, the combination of ferrimagnetism and low optical density makes barium ferrite particularly appealing for use in high-density recording and microwave technology applications.

Multiferroic Microstructure Created from Invariant Line Constraint

AbstractFerroic materials enable a multitude of emerging applications, and optimum functional properties are achieved when ferromagnetic and ferroelectric properties are coupled to a first‐order ferroelastic transition. In bulk materials, this first‐order transition involves an invariant habit plane, connecting coexisting phases: austenite and martensite. Theory predicts that this plane should converge to a line in thin films, but experimental evidence is missing. Here, the martensitic and magnetic microstructure of a freestanding epitaxial magnetic shape memory film is analyzed. It is shown that the martensite microstructure is determined by an invariant line constraint using lattice parameters of both phases as the only input. This line constraint explains most of the observable features, which differ fundamentally from bulk and constrained films. Furthermore, this finite‐size effect creates a remarkable checkerboard magnetic domain pattern through multiferroic coupling. The findings highlight the decisive role of finite‐size effects in multiferroics.

Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells

AbstractCesium‐based inorganic perovskites have emerged as promising light‐harvesting materials for perovskite solar cells (PSCs) due to their promising thermal‐ and photo‐stability. However, obstacles to commercialization remain regarding their phase instability. In this work, we report a facile and effective strategy to regulate the surface compressive strain via in situ surface reaction to stabilize CsPbI3 perovskite. The use of a chelating ligand with a molecular configuration closely matching the integer multiples of the unit cell lattice parameters of CsPbI3 induces compressive strain at the surface of CsPbI3. The chemical bonding and strain modulation synergistically not only passivate film defects, but also inhibit perovskite phase degradation, thus significantly improving the intrinsic stability of inorganic perovskite. Consequently, enhanced power conversion efficiency (PCE) of 21.0 % and 18.6 % were respectively achieved in 0.16‐cm2 lab‐scale devices and 25.3‐cm2 solar modules. Further, surface reaction enables PSCs with enhanced thermal and operational stability; these devices retain over 95 % of their initial PCE after damp‐heat tests (i.e., in 85 °C and 85 % R. H. air) for 2000 h, and remain 99 % of their initial PCE after operating for 2000 h, representing one of the most stable inorganic PSCs reported so far.

Crystal structure, Chemical Bonding, and Magnetism of α-Fe6Ga5: How Local Interactions Shape the Structure and Properties of Intermetallic Compounds.

α-Fe6Ga5 was synthesized from the elements as a polycrystalline powder. Its crystal structure was redetermined by high-resolution powder X-ray diffraction, which showed a complex monoclinic structure of the Fe6Ge5 type. The determined lattice parameters (a = 10.08380(6) Å, b = 7.97071(5) Å, c = 7.70489(5) Å, and β = 108.3062(2)°) differ notably from the previous reports. Despite possessing the same structure type as Fe6Ge5, α-Fe6Ga5 displays several distinctive features, such as short Ga-Ga bonds and distorted Fe layers. According to magnetization measurements, α-Fe6Ga5 is a soft ferromagnet with a high Curie temperature of 760 K, which is in stark contrast to the antiferromagnetic behavior of Fe6Ge5 reported in the literature. The electronic structure of α-Fe6Ga5 was studied theoretically using density functional theory-calculations, which showed the pronouncedly covalent character of the short Fe-Ga and Ga-Ga bonds. Similar calculations were performed for Fe6Ge5, which revealed stronger Fe-Ge interactions, which preclude the formation of short Ge-Ge bonds. In both cases, the theoretical calculations showed ferromagnetic instability, which leads to ferromagnetic ordering only in the case of α-Fe6Ga5, likely due to the different nature of Fe-Ga-Fe and Fe-Ge-Fe superexchange interactions.