Lateral Condensation Of Gutta-percha Research Articles

Coronal sealing ability of three sectional obturation techniques – SimpliFill, Thermafil and warm vertical compaction – compared with cold lateral condensation and post space preparation

The purpose of this study was to evaluate the effect post space preparation has on the coronal seal of root canals obturated with cold lateral condensation of gutta-percha compared with the corsonal sealing ability of three sectional obturation techniques not requiring post space preparation. Sixty-eight human maxillary central incisors were divided equally into four groups: cold lateral condensation (Group I), SimpliFill (Group II), Thermafil (Group III) and warm vertical compaction (Group IV). After coronal flaring, all four groups were cleaned and shaped with Lightspeed rotary instruments to a size 60 master apical rotary. After obturation Peeso Reamers were used to create a post space for Group I, while Groups 2, 3 and 4 incorporated the post space in the obturation (sectional technique) and did not require making a post space after obturation. The teeth were then stored in 100% humidity for 1 week and then kept in rhodamine B fluorescent dye for 3 weeks. The teeth were then split open, and the linear dye penetration from a coronal to apical direction (coronal seal) was evaluated with a fluorescent light microscope. Statistical analysis showed that Group I (cold lateral condensation followed by post space made with Peeso Reamers) leaked significantly more (P < 0.05) than the remaining three sectional obturation groups. It was concluded that stresses generated during post space preparation might be detrimental to the seal obtained by the obturation. Sectional obturations with their superior sealing ability offer a viable alternative.

Management of the Perforations Due to Miniplate Application

Microdimensioned osteosynthesis using miniplates has been common practice in maxillofacial surgery. However, tooth injury during the application of the miniplates have been reported in few papers. In this case, a 32-yr-old female patient, whose two teeth were necrosed because of the perforation during screw insertion was presented. The reason of the perforations during the rigid internal fixation was the lack of radiographic assessment because of the pregnancy. Maxillary right first premolar and maxillary left canine were perforated and necrosed because of the screw insertion. The necrosed teeth were detected 1 yr after the rigid internal fixation. The root canals of nonvital teeth were filed using step-down approach. Cold lateral condensation of gutta-percha was used to fill the canals. Six-month recall visits were scheduled and there was no problem after 2-yr follow-up period.

The influence of root canal shape on the sealing ability of two root canal sealers

To evaluate the influence of root canal form on the sealing ability of two root canal sealers. Twenty radiographically confirmed straight and 20 curved root canals were prepared with a stepback hand filing technique. Root canal aberrations created during preparation were determined by the use of double exposure radiographic technique. The prepared canals were filled with lateral condensation of gutta-percha and one or other of two root canal sealers (Pulp Canal Sealer and Sealapex). Leakage along the apical 10 mm of roots was measured with a fluid transport model at 1, 3, 6, 9 and 12-month intervals. There were no statistically significant differences between straight and curved root canals (P > 0.05) for prevalence of root canal transportation. The prevalence of apical transportation was 80% in the straight and 85% in the curved root canals. A complete seal was more frequently observed in straight canals compared with curved canals. Utilizing the pi* index, analysis showed the filling with Sealapex allowed more leakage than Pulp Canal Sealer at 1 year. Under the conditions of the study, root canal form influenced short-term sealing ability. In the long-term the seal was affected by the sealer rather than root canal form.

Sealing properties of different resin‐based root canal sealers

In this study, a comparison of the sealing properties of three different resin-based sealers, AH26, Diaket, and EndoREZ with those of the root canal sealer zinc oxide-eugenol-based U/P Root Canal Sealer was performed. Eighty extracted single-rooted human mandibular first premolar teeth were used. The coronal part of each tooth was removed at the apical 17-mm of roots. The root canals were prepared to a size 7 with ProFile 0.06 taper Series 29 rotary instruments in a crown-down manner before lateral condensation of gutta-percha with the tested sealers (n = 20). A fluid filtration method was used for quantitative evaluation of apical leakage. Statistical analysis revealed that there were no significant differences between the resin-based sealers groups (AH26, Diaket, and EndoREZ) (p > 0.05). U/P Root Canal Sealer, zinc oxide-eugenol-based sealer, leaked significantly more than other tested groups (p < 0.05). Under the limitations of this study, resin-based root canal sealers were found more effective in sealing root canals than the zinc oxide-eugenol-based sealer.

Evaluation of the Apical Seal in Root Canals Prepared with a New Rotary System and Obturated with a Methacrylate Based Endodontic Sealer: An In Vitro Study

The purpose of this study was to evaluate in vitro the apical seal of root canals prepared with a new rotary system, Anatomic Endodontic Technology (AET) and filled with a methacrylate based endodontic sealer and a single gutta-percha cone and a lateral condensation technique, using the methacrylate based endodontic sealer/filler or Grossman’s cement. The root canals of 45 freshly extracted human maxillary anterior teeth were prepared and then randomly assigned to three groups of 15 teeth each. After cleaning and shaping the teeth were obturated as follows: in group 1 the canals were filled with a methacrylate based sealer and a single gutta-percha cone; in group 2 the canals were filled using a lateral condensation technique with gutta-percha and the methacrylate based sealer; and in group 3, the canals were filled by means of lateral condensation of gutta-percha and Grossman’s cement (control group). The specimens were stored in 100% relative humidity at 37°C for 72 h, after which the coronal portion and the root surface of each tooth was covered with three layers of nail varnish and a final layer of sticky wax. After immersion in 2% methylene blue dye for 7 days, the specimens were imbedded in clear orthodontic resin and sectioned. Dye penetration was evaluated by an independent investigator using a stereo microscope. The results demonstrated that more pronounced leakage occurred in root canals obturated with the lateral condensation technique and Grossman’s cement (p < 0.05). The least amount of dye leakage was observed for group 1 and 2 in which the methacrylate based sealer was used, either with a single gutta-percha cone or with lateral condensation of gutta-percha.

The sealing ability of an epoxy resin root canal sealer after Nd:YAG laser irradiation of the root canal

To evaluate ex vivo the effect of Nd:YAG laser irradiation with and without black ink on instrumented root canal walls, and the degree of both coronal and apical microleakage of filled root canals. Seventy-two single-rooted teeth were instrumented up to a size 40 K-file, and then divided into six groups of 10 teeth: groups 1 and 4 remained unlased and acted as control groups, groups 2 and 5 were treated with a Nd:YAG laser (Fidelis Plus, Herzele, Belgium), groups 3 and 6 were treated with a laser and black ink; the remaining 12 teeth served as positive and negative controls. The laser was operated at 1.5 W, 15 Hz, four times for 5 s with a 20-s interval. Groups 4-6 were filled using cold lateral condensation of gutta-percha and AH26. After storage in water for 48 h at 37 degrees C, through-and-through leakage (L in microL day-1) was measured for 48 h under a pressure of 1.2 atm using a fluid transport model and recorded as L=0 (L1), 0<L<or=10 (L2), L>10 (L3). After the assessment of leakage with the fluid transport model, the teeth were immersed in rhodamine B solution for 48 h at 37 degrees C. Apical and coronal dye leakage was scored after longitudinal splitting of these teeth. All teeth of groups 1-3 were split longitudinally and observed under SEM for evaluation of remaining smear layer. Through-and-through leakage was only observed in the group lased with black ink (two samples-L2). Apical and coronal dye leakage was observed in all groups; there were no statistically significant differences amongst the three experimental groups. The through-and-through leakage, measured with the fluid transport model in two teeth of group 6, was confirmed in the dye leakage test (rhodamine B dye was observed along the total length of the root filling). There was evidence of melted and ablated root canal dentine in the laser-treated groups. These findings were more obvious in root canals lased in association with black ink. All apical foramina in the lased group remained patent. Nd:YAG laser irradiation with black ink increased the amount of melted and ablated dentine areas compared with that without black ink. Nd:YAG lasing in association with black ink did not result in a reduction of either coronal or apical microleakage in root filled teeth.

Periapical Inflammation after Coronal Microbial Inoculation of Dog Roots Filled with Gutta-Percha or Resilon

A dog model was used to assess and compare in vivo the efficacy of gutta-percha and AH26 sealer versus Resilon with Epiphany primer and sealer [Resilon “Monoblock” System (RMS)] filled roots in preventing apical periodontitis subsequent to coronal inoculation with oral microorganisms. There were 56 vital roots in the premolars of seven adult beagle dogs aseptically instrumented, filled, and temporized. The roots were randomly divided into four experimental groups (Coronal Leakage Model) and one negative control group and filled as follows: group 1—lateral condensation of gutta-percha and AH26 sealer ( n=12); group 2—vertical condensation of gutta-percha and AH26 sealer ( n=12); group 3—lateral condensation of RMS ( n=12); group 4—vertical condensation of RMS ( n=10); negative control ( n=10)—gutta-percha and AH26 sealer or RMS root fillings using lateral or vertical condensation techniques as in groups 1 to 4. Positive control—57 additional premolar roots were instrumented, infected and not filled (beginning of the Entombment Model experiment). The premolars in groups 1 to 4 were accessed again, inoculated with dental plaque scaled from the dog's teeth, and temporized. This fresh innoculum of microorganisms was repeated on two more occasions at monthly intervals. The teeth in the negative control group were not accessed again and remained undisturbed. On the 14-wk postcoronal inoculation, dogs were euthanized, and jaw blocks prepared for histologic evaluation under a light microcope. Mild inflammation was observed in 82% (18 of 22) of roots filled with gutta-percha and AH26 sealer that was stastistically more than roots filled with RMS (19% or 4 of 21) and roots in the negative control (22% or 2 of 9) (McNemar paired analysis, p < 0.05). The Resilon “Monoblock” System was associated with less apical periodontitis, which may be because of its superior resistance to coronal microleakage.

Endodontic treatment of a maxillary first premolar with three roots a case report

The purpose of this paper was to report the possibility for successful endodontic treatment of a complex case of maxillary . first premolar with three roots and three canals. Radiographic interpretation and correct access cavity preparation were performed. Cleaning and shaping of the root canal followed by cold lateral gutta percha condensation was accomplished. The present report emphasizes the knowledge ofanatomical variations, clinical and radiographic interpretations in maxillary first premolar.

Root canal obturation by hybrid technique of thermomechanical gutta-percha compaction

The purpose of the study was to present and discuss the thermomechanical hybrid technique in root canal obturation and investigate the efficiency of apical hermeticity. The hybrid obturation technique is well explained and performed through the lexan models and extracted teeth in aim of better visualisation and comprehension as suggested by the author Tagger and McSpadden?s articles. The technique consisted of lateral condensation of gutta-percha that was followed by thermomechanical compaction of the same mass using Ni-Ti flexible compactor. Firstly the master gutta-percha cone had to be adapted and then the master machine compactor selected for setting inside the canal. Upon laterally arranging gutta-percha cones, the master compactor was inserted between canal wall and gutta-percha. The master compactor was rotated for 5-6 seconds to creat heat to soften the cones to merge themselves and fill the first half of the canal. The bigger compactor served to fill the rest of the canal adding more gutta-percha cones. In comparison to the single cone and simple manual compaction techniques the hybrid technique is less time consuming more efficient in homogenicity and apical leakage. Considering the many device-consuming techniques the hybrid one is simpler to perform and cheaper as well. Precaution is to be taken when treating curved and narrow canals where much patience is needed due to possible compactor breakage and root fracture. It can be concluded that this hybrid technique is preferable particularly in cases of relatively straight canals with preserved apical foramen when time is to be saved for the radiographic and prosthetics procedure that has to be done during the same visit, which is very often convenient for patient and therapist.

Root canal obturation by hybrid technique of thermomechanical gutta-percha compaction

The purpose of the study was to present and discuss the thermomechanical hybrid technique in root canal obturation and investigate the efficiency of apical hermeticity. The hybrid obturation technique is well explained and performed through the lexan models and extracted teeth in aim of better visualisation and comprehension as suggested by the author Tagger and McSpadden’s articles. The technique consisted of lateral condensation of gutta-percha that was followed by thermomechanical compaction of the same mass using Ni-Ti flexible compactor. Firstly the master gutta-percha cone had to be adapted and then the master machine compactor selected for setting inside the canal. Upon laterally arranging gutta-percha cones, the master compactor was inserted between canal wall and gutta-percha. The master compactor was rotated for 5-6 seconds to creat heat to soften the cones to merge themselves and fill the first half of the canal. The bigger compactor served to fill the rest of the canal adding more gutta-percha cones. In comparison to the single cone and simple manual compaction techniques the hybrid technique is less time consuming more efficient in homogenicity and apical leakage. Considering the many device-consuming techniques the hybrid one is simpler to perform and cheaper as well. Precaution is to be taken when treating curved and narrow canals where much patience is needed due to possible compactor breakage and root fracture. It can be concluded that this hybrid technique is preferable particularly in cases of relatively straight canals with preserved apical foramen when time is to be saved for the radiographic and prosthetics procedure that has to be done during the same visit, which is very often convenient for patient and therapist.

Intracanal Distribution Patterns of Sealers After Lateral Condensation

The purpose of this study was to examine coverage patterns of sealer on canal walls and between gutta-percha cones after lateral condensation. Ninety extracted teeth with single canals were evenly and randomly divided into three sealer groups (Roth's, Sealapex, AH 26). Canals were cleaned and shaped, then coated with one of the three sealers followed by lateral condensation of gutta-percha. The teeth were placed into 100% humidity at 37 degrees C. After 4 months the roots were notched and fractured longitudinally and the dentin lifted to expose the gutta-percha sealer and dentin walls. Qualitative assessment was in the apical and coronal as to the amount and the pattern of sealer coverage. Coverage was categorized by the amount and location as follows: (a) no sealer; (b) slight-partial; (c) moderate-partial; or (d) complete coverage. Sealer was frequently absent between gutta-percha cones and the canal wall and at times absent between cones, with a general moderate-partial coverage. No sealer group demonstrated complete coverage; however, AH 26 showed more consistent moderate-partial distribution. Coverage was better in the coronal. In conclusion, none of the three sealers showed a continuous layer between the primary gutta-percha obturant and the canal wall or in spaces between cones.

Endodontic treatment performed by Flemish dentists. Part 2. Canal filling and decision making for referrals and treatment of apical periodontitis.

To gather information on root-canal treatment carried out by dentists working in Flanders (Belgium). A questionnaire reported in a previous study was also used to gather information on canal medicaments, canal filling, and in decision making for referrals and treatment of apical periodontitis. Calcium hydroxide as an interappointment dressing was used by 69.7% of the respondents. Approximately one-third of the respondents did not use any intracanal medicament. Caustic products used for pulp tissue fixation were used by 66.8% of the respondents. Cavit (48.2%) and glass-ionomer (31.3%) were the temporary coronal-filling materials used most often, followed by zinc oxide-eugenol and IRM(R). Cold lateral condensation of gutta-percha was the filling technique most used by the respondents (65.8%). Single-cone gutta-percha placement (16%), paste techniques (4.9%) and silver points (3.9%) were still used. Resin-based sealers were used most often (88.6%). Paraformaldehyde containing sealers such as Endomethasone and N2 were used infrequently. Approximately half of the practitioners were satisfied with their canal-filling technique, others felt that they could do better (43.0%); 0.7% were not satisfied. In cases with apical periodontitis, the size of periapical lesions and/or the presence of a root filling influenced the choice of endodontic treatment. The most common reasons for referral of endodontic cases were: retrieval of silver points, surgery, and post removal. The results of this study indicate that techniques and methods used for canal medication and canal filling were acceptable for the majority of the respondents. Re-treatment was underestimated as a treatment option.

Influence of irrigants on the coronal microleakage of laterally condensed gutta-percha root fillings.

To assess in vitro coronal microleakage in extracted human teeth after root-canal treatment, using different endodontic irrigants. Fifty teeth with single root canals were prepared and filled using the lateral condensation of gutta-percha and Endométhasone sealer. Canal preparation consisted of initial shaping of the coronal two-thirds with Gates-Glidden burs size 2 and 3, followed by preparation of the apical stop and step-back flaring with manual files. Each group (n = 10) was irrigated with the following solutions: I--1% NaOCl, II--1% NaOCl + 17% EDTA, III--2% chlorhexidine gel, IV--2% chlorhexidine gel + 1% NaOCl, and V--distilled water. After root-canal filling, the teeth were incubated at 37 degrees C for 10 days followed by 10 days immersion in human saliva and an additional 10 days in India ink. The teeth were cleared and maximum dye penetration was determined digitally in millimetres. Statistical analysis was carried out using the Kruskal-Wallis test. Least leakage occurred with 1% NaOCl + 17% EDTA (2.62 mm) and 2% chlorhexidine gel (2.78 mm) (P > 0.05). NaOCl (3.51 mm), distilled water (6.10 mm) and 2% chlorhexidine gel + 1% NaOCl (9.36 mm) gave increased leakage with a significant difference compared to NaOCl + 17% EDTA and 2% chlorhexidine gel, and compared to one another (P < 0.05). Under the condition of this study, irrigation method during root-canal treatment influenced coronal microleakage. NaOCl + EDTA and chlorhexidine gel allowed better sealing following root filling.

Apical Leakage of Five Root Canal Sealers After One Year of Storage

A fluid transport model study was used to compare the sealing ability of five root canal sealers (AH26, AH Plus, Apexit, Diaket, and Ketac-Endo) on 60 single-rooted teeth after 1 yr of storage. The root canals were prepared with Gates Glidden drills by using a step-back technique before lateral condensation of gutta-percha with the tested sealers. The specimens were stored in saline solution for 1 yr at 37 degrees C. The leakage was measured by the movement of an air bubble in a capillary glass tube connected to the experimental root section. Apexit (0.490 microl) leaked significantly more than AH Plus (0.378 microl) and Ketac-Endo (0.357 microl), whereas AH26 (0.390 microl) and Diaket (0.429 microl) showed no significant difference from either Apexit or from AH Plus and Keto-Endo.

Evaluation of Leakage of Bacteria and Endotoxins in Teeth Treated Endodontically by Two Different Techniques

Root canal recontamination occurs after contact between oral-bacterial flora and the coronal extremity of the root canal. The aim of this study was to evaluate the time required for endotoxins and bacteria to penetrate through root-canal obturations performed with vertical and lateral gutta-percha condensation techniques. Specimens prepared by the two alternative methods were exposed to contaminated saliva, and leakage into the root was evaluated over time. None of the obturated roots was infiltrated by endotoxins after 31 days. On the contrary, between day 13 and day 37 bacteria had infiltrated all specimens.

Effect of Irrigating Solution and Calcium Hydroxide Root Canal Dressing on the Repair of Apical and Periapical Tissues of Teeth with Periapical Lesion

The objective of this study was to evaluate the apical and periapical repair after endodontic treatment of teeth with pulp necrosis and a chronic periapical lesion in dogs. Seventy-two root canals from four mongrel dogs were submitted to biomechanical preparation, using 5.25% sodium hypochlorite or 2% chlorhexidine digluconate as the irrigating solution. The root canals were subsequently either filled immediately with Sealapex, using active lateral gutta-percha condensation, or a calcium hydroxide root canal dressing was applied for 15 days before filling with Sealapex. After 210 days, the animals were killed by anesthetic overdose, and the obtained histological sections were stained with hematoxylin and eosin for optical microscopic analysis of apical and periapical repair. There was better histological repair in the groups with the root canal dressing (p < 0.05) than the groups with immediate obturation. Comparing the immediate obturation groups, irrigation with chlorhexidine solution resulted in better repair than sodium hypochlorite.

The outcome of root canal treatment. A retrospective study within the armed forces (Royal Air Force).

The objective of this study was to investigate the outcome of conventional root canal treatment in a general practice setting within the Royal Air Force dental service. Design Retrospective review. Teeth that had been root-filled for 12 months or more by Royal Air Force dental practitioners in patients attending a large Royal Air Force dental centre were included in the study. Following clinical and radiographic review the root fillings were classified as 'definitely successful', 'probably successful' or 'failed' The effect on success of several variables on the outcome was investigated. Out of a total of 406 teeth, 59% were maxillary teeth and 41% were mandibular teeth. Sixty-nine per cent of the total sample had pre-existing periapical radiolucencies. Cold lateral condensation of gutta-percha was the most widely used filling technique (64% of all cases). Fifty per cent of the teeth had root fillings within 2 mm of the radiographic apex, 32% were greater than 2 mm from the radiographic apex and 18% were overfilled. Cold lateral condensation was the most successful (92% overall) filling technique. Maxillary anterior teeth had a better success rate (96%) than other tooth types. Teeth with pre-existing periapical radiolucencies had a higher success rate (87%) than those cases where there was no pre-existing periapical radiolucency (80%). Root fillings that were less than 2 mm from the radiographic apex of the tooth had a higher success rate (88% overall) than those that were greater than 2 mm from the radiographic apex (77% overall). Of the 406 cases, 57% (n=231) were classified as definitely successful, 28% (n=114) were classified as probably successful and 15% (n=62) were classified as failures. Thus, the overall success rate combining definitely successful and probably successful root fillings was 85% (n=344). Root fillings placed using cold lateral condensation of gutta-percha to within 2 mm of the radiographic apex of the tooth were associated with the best outcome.

Comparison of lateral condensation and thermomechanically compacted warm α-phase gutta-percha with a single cone for obturating curved root canals

Objective. To evaluate and compare the sealability and radiographic quality of root fillings in extracted teeth by using lateral condensation of gutta-percha or α-phase gutta-percha in conjunction with a single gutta-percha cone. Study Design. A total of 108 single-rooted teeth were divided into 2 groups of 54 teeth based on canal shape. Canals were prepared to a minimum 0.055 taper and enlarged to a size 35 at the working distance. Irrigation was done with 17% EDTA and 2.5% sodium hypochlorite (NaOCl) to remove smear layer. One group was obturated by using cold lateral condensation of gutta-percha; the other group was obturated with thermomechanically compacted α-phase gutta-percha and a single cone of gutta-percha. Apical extrusion of sealer or gutta-percha was recorded. Sealability of each technique was assessed by dye penetration. The radiographic quality of obturation was also determined. Results. Root canals filled with α-phase gutta-percha and a single cone had significantly more extrusion of sealer than canals filled by lateral condensation. Lateral condensation achieved significantly better scores for radiographic quality. There was no significant difference between the 2 filling techniques in terms of apical or coronal leakage. Conclusions. Thermomechanically condensed α-phase gutta-percha used in conjunction with a single gutta-percha cone had poorer radiographic quality than laterally condensed gutta-percha. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2001;91:89-94)

Comparison of Laterally Condensed and Low-Temperature Thermoplasticized Gutta-Percha Root Fillings

The aim of this study was to evaluate and compare the radiographic quality and sealability of root fillings in extracted human teeth using lateral condensation of gutta-percha or low-temperature thermoplasticized gutta-percha (Ultrafil). One hundred freshly extracted human, mature single-rooted teeth were divided into four identical groups of 25 teeth on the basis of root canal shape. The root canals of two groups were prepared in such a way to produce a relatively parallel shape with little or no flare toward the coronal orifice. The root canals of the other two groups were prepared in such a way as to produce a canal shape that was deliberately more flared to ensure that they were wider at the orifice than at the end point of the preparation. All root canals were flushed with 17% EDTA solution and 2.5% NaOCl to remove the dentinal smear layer. The canals of one flared group and one parallel group were obturated using cold lateral condensation, and the canals of the other two groups were obturated using low-temperature thermoplasticized gutta-percha. The sealability of each technique was assessed by a dye penetration method. The radiographic quality of obturation was determined for each canal using a 4-point scale. Canals filled with thermoplasticized gutta-percha had significantly less apical dye penetration than those obturated by lateral condensation (p < 0.001). Lateral condensation achieved significantly better scores for radiographic quality than thermoplasticized gutta-percha from both the buccolingual (p < 0.005) and mesiodistal views (p < 0.001). Low-temperature thermoplasticized gutta-percha root fillings were associated with significantly more apical extrusion of sealer (p < 0.001) and gutta-percha (p < 0.005). Under laboratory conditions the low-temperature thermoplasticized gutta-percha had better sealability but poorer radiographic quality than lateral condensation.

Increased Density of Gutta-Percha Using a Controlled Heat Instrument with Lateral Condensation

The purpose of this study was to compare quantitatively the density of standard cold lateral gutta-percha condensation and warm lateral gutta-percha condensation using the System B heating instrument in a low-heat warm lateral condensation technique in an artificial root canal in vitro. Thirty-degree simulated root canals in 30 transparent acrylic blocks were instrumented using Gates-Glidden burs and Quantec (NT Company, Chattanooga, TN) rotary files. The canals were then obturated with gutta-percha using standard cold lateral condensation without sealer. Warm lateral condensation without sealer using the System B instrument at 101 degrees C was then performed on the same 30 canals. A second treatment of warm lateral condensation was then applied to these same canals. The blocks were weighed after the initial canal preparation and after each obturation treatment. Results showed warm lateral condensation of gutta-percha using the System B resulted in a significant increase in density by weight when compared with standard cold lateral condensation. A 23.97% increase in weight was realized after the first heat application, compared with standard lateral condensation. A second heat application produced an additional 2.59% increase in weight over that produced by the first heat application. Data were analyzed using a t test for repeated measures. Both increases were statistically significant (p < 0.001). Warm lateral condensation using the System B instrument results in denser gutta-percha fills by weight when compared with standard cold lateral condensation.