Laser Ion Source Research Articles

Surface modifications of AISI 420 stainless steel by low energy Yttrium ions

In this work, we study surface modifications of AISI 420 stainless steel specimens in order to improve their surface properties. Oxidation resistance and surface micro-hardness were analyzed. Using an ion beam delivered by a Laser Ion Source (LIS) coupled to an electrostatic accelerator, we performed implantation of low energy yttrium ions on the samples. The ions experienced an acceleration passing through a gap whose ends had a potential difference of 60 kV. The gap was placed immediately before the samples surface. The LIS produced high ions fluxes per laser pulse, up to 3x1011 ions/cm2, resulting in a total implanted flux of 7x1015 ions/cm2. The samples were characterized before and after ion implantation using two analytical techniques. They were also thermally treated to investigate the oxide scale. The crystal phases were identified by an X-ray diffractometer, while the micro-hardness was assayed using the scratch test and a profilometer. The first analysis was applied to blank, implanted and thermally treated sample surface, while the latter was applied only to blank and implanted sample surfaces. We found a slight increase in the hardness values and an increase to oxygen resistance. The implantation technique we used has the advantages, with respect to conventional methods, to modify the samples at low temperature avoiding stray diffusion of ions inside the substrate bulk.

Diamond-like carbon prepared by pulsed laser deposition with ion bombardment: physical properties

Diamond-like carbon (DLC) and titanium-doped DLC thin films were prepared by unique hybrid system consisting of pulsed laser deposition, ion source (bombardment) and magnetron sputtering. The influence of deposition parameters (ion energies, deposition pressures and magnetron power) on composition and physical properties was studied. Composition and sp3/sp2 ratio were determined by XPS. sp3/sp2 ratio was in the range from 1.4 to 2.2 for undoped DLC and from 3.4 to 4.8 for Ti-DLC. AFM showed that the layers were smooth, but with small amounts of random droplets. The measurements of the contact angle and determination of surface free energy were made for water, diiodomethane and ethylene glycol. Hardness and reduced Young’s modulus varied from 20 to 31 GPa and from 182 to 276 GPa, respectively. Film adhesion was determined by scratch test; LC3 reached 23 N for DLC and 27 N for TiDLC. Optimization of sp3/sp2 ratio, hardness and adhesion to biomedical alloys will advance the DLC coatings usability in the field of implantology.

Charting Terra Incognita at Alto and S3

Charting Terra Incognita is a project grant that brings together the IPN Orsay, CSNSM Orsay and Irfu-SPHN laboratories around the common development of knowhow, equipment and techniques for mass spectrometry and nuclear spectroscopy at the low-energy branch of the new S3 spectrometer at Ganil, where likewise the Reglis set-up for intrajet laser spectroscopy is entering its final phase of construction. At the same time its concerted action initiates and sets the pace for the corresponding precursor physics programme at the Alto on-line isotope-separation facility, based on the photofission of uranium. We also collect a review of the Alto laser ion source, which is an essential instrument at any low-energy facility for the production of purified isotopic beams.

Behavior of Laser Ablation Plasma During Transport in Multicusp Magnetic Field Using Different Targets for Laser Ion Source

To obtain laser ion sources with high current and long pulse, a method of applying multicusp magnetic fields to confine laser ablation plasmas has been proposed. The behaviors of the laser ablation plasmas during transporting in the multicusp magnetic fields are investigated by experiments using two types of multicusp magnetic field and the targets of aluminum, copper, and lead. To understand the behavior of the ablation plasma, numerical calculations for ion trajectory were also performed. The results indicate that the distance which a plasma proceeds until the appearance of the effect of the magnetic field on the plasma behavior at the center axis could be explained by ion motions affected by the azimuthal magnetic field.

Detailed α -decay study of Tl180

A detailed $\alpha$-decay spectroscopy study of $^{180}\mathrm{Tl}$ has been performed at ISOLDE (CERN). $Z$-selective ionization by the Resonance Ionization Laser Ion Source (RILIS) coupled to mass separation provided a high-purity beam of $^{180}\mathrm{Tl}$. Fine-structure $\alpha$ decays to excited levels in the daughter $^{176}\mathrm{Au}$ were identified and an $\alpha$-decay scheme of $^{180}\mathrm{Tl}$ was constructed based on an analysis of $\alpha$-$\gamma$ and $\alpha$-$\gamma$-$\gamma$ coincidences. Multipolarities of several $\gamma$-ray transitions deexciting levels in $^{176}\mathrm{Au}$ were determined. Based on the analysis of reduced $\alpha$-decay widths, it was found that all $\alpha$ decays are hindered, which signifies a change of configuration between the parent and all daughter states.

Ionization cross section, pressure shift and isotope shift measurements of osmium

In-gas-cell laser resonance ionization spectroscopy of neutral osmium atoms was performed with the use of a two-color two-step laser resonance ionization technique. Saturation curves for the ionization scheme were measured, and the ionization cross section was experimentally determined by solving the rate equations for the ground, intermediate and ionization continuum populations. The pressure shift and pressure broadening in the resonance spectra of the excitation transition were measured. The electronic factor for the transition nm to the intermediate state was deduced from the measured isotope shifts of stable Os isotopes. The efficient ionization scheme, pressure shift, nuclear isotope shift and are expected to be useful for applications of laser ion sources to unstable nuclei and for nuclear spectroscopy based on laser ionization techniques.

The laser and optical system for the RIBF-PALIS experiment

This paper describes the laser and optical system for the Parasitic radioactive isotope (RI) beam production by Laser Ion-Source (PALIS) in the RIKEN fragment separator facility. This system requires an optical path length of 70 m for transporting the laser beam from the laser light source to the place for resonance ionization. To accomplish this, we designed and implemented a simple optical system consisting of several mirrors equipped with compact stepping motor actuators, lenses, beam spot screens and network cameras. The system enables multi-step laser resonance ionization in the gas cell and gas jet via overlap with a diameter of a few millimeters, between the laser photons and atomic beam. Despite such a long transport distance, we achieved a transport efficiency for the UV laser beam of about 50%. We also confirmed that the position stability of the laser beam stays within a permissible range for dedicated resonance ionization experiments.

Doughnut-shaped gas cell for KEK Isotope Separation System

Abstract We have developed a doughnut-shaped argon gas cell with a rotating target for the KEK Isotope Separation System (KISS). The new gas cell increased extraction yields for target-like fragments (TLFs) produced in multi-nucleon transfer (MNT) reactions. KISS is an on-line isotope separator, which makes use of a laser ion source combined with an argon gas cell as a gas catcher for TLFs. This system has been implemented for nuclear spectroscopy of neutron-rich isotopes in the region of N = 126 . A gas flow simulation was performed to optimize the design of the gas cell for efficient and fast transport of TLFs. To confirm the performance expected at the design stage, we performed off- and on-line experiments by using iridium atoms evaporated from a filament in the gas cell and TLFs produced by a 136 Xe beam and 198 Pt target system respectively. We could increase the extraction yield by more than an order of magnitude by applying a doughnut-shaped gas cell with a rotating target. Thus, we could perform nuclear spectroscopy in this heavy region with the use of KISS.

A new approach to improving the accuracy of elemental analysis in laser mass spectrometry.

It is shown that the main reason affecting the accuracy and reproducibility of the elemental analysis of solids with a laser source of ions is the difference in the ionization cross sections of different elements in the generation of laser plasma. Computer modeling was carried out for the evaporation of the sample and generation of laser plasma at different values of laser power density. The aim of modelling was to determine the cause of the low accuracy of analysis by direct selection of ions from the plasma. The researches have shown that we cannot get satisfactory accuracy of analysis using analytical signal formed only on the base of single-charged ions. At the same time, in the formation of an analytical signal, as a sum of the intensities of the mass peaks of all charges of each element, the accuracy of the analysis does not depend either on the ionization cross section or on the nonreproducibility of the laser radiation power. It is shown that this approach completely eliminates the "matrix effect."

Laser ion mobility spectrometry in the detection of ultra-low quantities of explosives.

The paper presents the results of research and development of ion mobility spectrometer with laser ion sources for detecting ultra-low quantities of explosives in air. Particular attention is paid to the mechanisms of the formation of negative ions. It is shown that laser ionization with respect to ion mobility spectrometry provides an increase of sensitivity and selectivity of detection. The ion mobility spectra of the most common nitro explosives are investigated. The detection threshold for laser ion mobility spectrometer was reached at the level of 10-14 g/cm3 (for trinitrotoluene).

Ion beam production and study of radioactive isotopes with the laser ion source at ISOLDE**This article belongs to the Focus on Exotic Beams at ISOLDE: A Laboratory Portrait special issue.

At ISOLDE the majority of radioactive ion beams are produced using the resonance ionization laser ion source (RILIS). This ion source is based on resonant excitation of atomic transitions by wavelength tunable laser radiation. Since its installation at the ISOLDE facility in 1994, the RILIS laser setup has been developed into a versatile remotely operated laser system comprising state-of–the-art solid state and dye lasers capable of generating multiple high quality laser beams at any wavelength in the range of 210–950 nm. A continuous programme of atomic ionization scheme development at CERN and at other laboratories has gradually increased the number of RILIS-ionized elements. At present, isotopes of 40 different elements have been selectively laser-ionized by the ISOLDE RILIS. Studies related to the optimization of the laser–atom interaction environment have yielded new laser ion source types: the laser ion source and trap and the versatile arc discharge and laser ion source. Depending on the specific experimental requirements for beam purity or versatility to switch between different ionization mechanisms, these may offer a favourable alternative to the standard hot metal cavity configuration. In addition to its main purpose of ion beam production, the RILIS is used for laser spectroscopy of radioisotopes. In an ongoing experimental campaign the isotope shifts and hyperfine structure of long isotopic chains have been measured by the extremely sensitive in-source laser spectroscopy method. The studies performed in the lead region were focused on nuclear deformation and shape coexistence effects around the closed proton shell Z = 82. The paper describes the functional principles of the RILIS, the current status of the laser system and demonstrated capabilities for the production of different ion beams including the high-resolution studies of short-lived isotopes and other applications of RILIS lasers for ISOLDE experiments.

Even-parity Rydberg and autoionizing states of lutetium by laser resonance-ionization spectroscopy

Multi-step laser resonance ionization spectroscopy of lutetium (Lu) has been performed at TRIUMF's off-line laser ion source test stand. The even-parity Rydberg series $6s^2nd$ $^2D_{3/2}$, $6s^2nd$ $^2D_{5/2}$ and $6s^2ns$ $^2S_{1/2}$ were observed converging to the 6s$^2$ ionization potential. The experimental results has been compared to previous work. 51 levels of Rydberg series $6s^2nd$ $^2D_{5/2}$ and 52 levels of Rydberg series $6s^2ns$ $^2S_{1/2}$ were reported new. Additionally six even-parity autoionization (AI) series converging to Lu ionic states $5d6s$ $^3D_1$ and $5d6s$ $^3D_2$ were observed. The level energies of these AI states were measured. The configurations of the AI states were assigned by relativistic multichannel theory (RMCT) within the framework of multichannel quantum defect theory (MQDT).

Resonant ionization spectroscopy of autoionizing Rydberg states in cobalt and redetermination of its ionization potential**This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to

Multi-step resonance ionization spectroscopy of cobalt has been performed using a hot-cavity laser ion source and three Ti:Sapphire lasers. The photoionization spectra revealed members of five new autoionizing Rydberg series that originate from three different lower levels of 3d74s5s h4F9/2, 3d74s4d f4G11/2, and 3d74s4d f4H13/2 and converge to the first four excited states of singly ionized Co. The analyses of the Rydberg series yield 63 564.689 ± 0.036 cm−1 as the first ionization potential of Co, which is an order of magnitude more accurate than the previous estimation. Using a three-step resonance ionization scheme that employs an autoinizing Rydberg state in the last transition, we obtained an overall ionization efficiency of about 18% for Co.

Chemical Analysis of Water-accommodated Fractions of Crude Oil Spills Using TIMS-FT-ICR MS.

Multiple chemical processes control how crude oil is incorporated into seawater and also the chemical reactions that occur overtime. Studying this system requires the careful preparation of the sample in order to accurately replicate the natural formation of the water-accommodated fraction that occurs in nature. Low-energy water-accommodated fractions (LEWAF) are carefully prepared by mixing crude oil and water at a set ratio. Aspirator bottles are then irradiated, and at set time points, the water is sampled and extracted using standard techniques. A second challenge is the representative characterization of the sample, which must take into consideration the chemical changes that occur over time. A targeted analysis of the aromatic fraction of the LEWAF can be performed using an atmospheric-pressure laser ionization source coupled to a custom-built trapped ion mobility spectrometry-Fourier transform-ion cyclotron resonance mass spectrometer (TIMS-FT-ICR MS). The TIMS-FT-ICR MS analysis provides high-resolution ion mobility and ultrahigh-resolution MS analysis, which further allow the identification of isomeric components by their collision cross-sections (CCS) and chemical formula. Results show that as the oil-water mixture is exposed to light, there is significant photo-solubilization of the surface oil into the water. Over time, the chemical transformation of the solubilized molecules takes place, with a decrease in the number of identifications of nitrogen- and sulfur-bearing species in favor of those with a greater oxygen content than were typically observed in the base oil.

RILIS-ionized mercury and tellurium beams at ISOLDE CERN

This paper presents the results of ionization scheme development for application at the ISOLDE Resonance Ionization Laser Ion Source (RILIS). Two new ionization schemes for mercury are presented: a three-step three-resonance ionization scheme, ionizing via an excitation to a Rydberg level and a three-step two-resonance ionization scheme, with a non-resonant final step to the ionization continuum that corresponded to a factor of four higher ionization efficiency. The efficiency of the optimal mercury ionization scheme was measured, together with the efficiency of a new three-step three resonance ionization scheme for tellurium. The efficiencies of the mercury and tellurium ionization schemes were determined to be 6 % and >18 % respectively.

Resonance ionization scheme development for europium

Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

Current developments with TRIUMF’s titanium-sapphire laser based resonance ionization laser ion source

Developments at TRIUMF’s isotope separator and accelerator (ISAC) resonance ionization laser ion source (RILIS) in the past years have concentrated on increased reliability for on-line beam delivery of radioactive isotopes to experiments, as well as increasing the number of elements available through resonance ionization and searching for ionization schemes with improved efficiency. The current status of these developments is given with a list of two step laser ionization schemes implemented recently.

Laser resonance ionization spectroscopy on lutetium for the MEDICIS project

The MEDICIS-PROMED Innovative Training Network under the Horizon 2020 EU program aims to establish a network of early stage researchers, involving scientific exchange and active cooperation between leading European research institutions, universities, hospitals, and industry. Primary scientific goal is the purpose of providing and testing novel radioisotopes for nuclear medical imaging and radionuclide therapy. Within a closely linked project at CERN, a dedicated electromagnetic mass separator system is presently under installation for production of innovative radiopharmaceutical isotopes at the new CERN-MEDICIS laboratory, directly adjacent to the existing CERN-ISOLDE radioactive ion beam facility. It is planned to implement a resonance ionization laser ion source (RILIS) to ensure high efficiency and unrivaled purity in the production of radioactive ions. To provide a highly efficient ionization process, identification and characterization of a specific multi-step laser ionization scheme for each individual element with isotopes of interest is required. The element lutetium is of primary relevance, and therefore was considered as first candidate. Three two-step excitation schemes for lutetium atoms are presented in this work, and spectroscopic results are compared with data of other authors.

Development of a laser ion source for production of high-intensity heavy-ion beams

A laser ion source has been developed as a high-intensity source for the ion implanter and the single pulsed beam of the azimuthally varying field cyclotron at TIARA. Highly charged beams of C5+ and C6+ ions and low-charged beams of heavy ions such as C, Al, Ti, Cu, Au, and Pt are required for the single-pulse acceleration in the cyclotron and for the ion implanter, respectively. In the vacuum chamber of the ion source, a target holder on a three-dimensional linear-motion stage provides a fresh surface for each laser shot. A large-sized target with a maximum size of 300mm×135mm is mounted on the holder for long-term operation. The ion current (ion charge flux) in the laser-produced plasma is measured by a Faraday cup and time-of-flight spectra of each charge state are measured using a 90° cylindrical electrostatic analyzer just behind the Faraday cup. Carbon-plasma-generation experiments indicate that the source produces intense high- and low-charged pulsed ion beams. At a laser energy of 483mJ (2.3×1013W/cm2), average C6+ current of 13mA and average C5+ current of 23mA were obtained over the required time duration for single-pulse acceleration in the cyclotron (49ns for C6+ and 80ns for C5+). Furthermore, at 45mJ (2.1×1012W/cm2), an average C2+ current of 1.6mA over 0.88μs is obtained.

The identification of autoionizing states of atomic chromium for the resonance ionization laser ion source of the ISOLDE radioactive ion beam facility

This paper presents the results of an investigation into autoionizing states of atomic chromium, in the service of the resonance ionization laser ion source (RILIS): the principal ion source of the ISOLDE radioactive ion beam facility based at CERN. The multi-step resonance photo-ionization process enables element selective ionization which, in combination with mass separation, allows isotope specific selectivity in the production of radioactive ion beams at ISOLDE. The element selective nature of the process requires a multi-step “ionization scheme” to be developed for each element. Using the method of in-source resonance ionization spectroscopy, an optimal three-step, three-resonance photo-ionization scheme originating from the 3d5(6S)4s a7S3 atomic ground state has been developed for chromium. The scheme uses an ionizing transition to one of the 15 newly observed autoionizing states reported here. Details of the spectroscopic studies are described and the new ionization scheme is summarized.