Laser-induced Desorption Research Articles

Development of laser-based diagnostics for surface characterisation of wall components in fusion devices

Laser-based techniques in combination with spectroscopy are proposed for in situ characterization of the first wall in ITER. Three laser-based diagnostics, laser-induced desorption spectroscopy (LIDS), laser-induced ablation spectroscopy (LIAS) and laser-induced breakdown spectroscopy (LIBS) are under investigation in Forschungszentrum Jülich (FZJ) to determine the stored amount of tritium (“tritium retention”) and to characterize the layer deposition on the wall components in fusion devices (thickness, composition, growth rate). Demonstration experiments for LIDS, LIAS and LIBS were performed on TEXTOR and in the laboratory. An advanced ITER prototype version of these diagnostics is currently under preparation on TEXTOR based on coaxial laser beam injection and light detection with the possibility to scan certain wall areas in TEXTOR. It has been demonstrated that LIDS is a reliable diagnostic for the absolute determination of hydrogen isotopes retained on first wall components on the basis of a single laser shot in combination with local H α spectroscopy. LIAS and LIBS are presently under investigation with respect to their capability to monitor reliably in situ the thickness and composition of deposited layers on the first wall during and between plasma pulses, respectively. A preliminary design and the main parameters for the application of these methods at ITER are discussed.

Preparation, IR spectroscopy, and time-of-flight mass spectrometry of halogenated and methylated Si(111)

The preparation of chlorine-, bromine-, and iodine-terminated silicon surfaces (Si(111):Cl, Br, and I) using atomically flat Si(111)-(1×1):H is described. The halogenated surfaces were obtained by photochemically induced radical substitution reactions with the corresponding dihalogen in a Schlenk tube by conventional inert gas chemistry. The nucleophilic substitution of the Si-Cl functionality with the Grignard reagent (CH3MgCl) resulted in the unreconstructed methylated Si(111)-(1×1):CH3 surface. The halogenated and methylated silicon surfaces were characterized by Fourier transform infrared (FTIR) spectroscopy and laser-induced desorption of monolayers (LIDOM). Calibration of the desorption temperature via analysis of time-of-flight (TOF) distributions as a function of laser fluence allowed the determination of the originally emitted neutral fragments by TOF mass spectrometry using electron-impact ionization. The halogens were desorbed atomically and as SiXn (X = Cl, Br) clusters. The methyl groups mainly desorbed as methyl and ethyl fragments and a small amount of +SiCH3.

Analysis of AcrB and AcrB/DARPin ligand complexes by LILBID MS

The AcrA/AcrB/TolC complex is responsible for intrinsic multidrug resistance (MDR) in Escherichia coli. Together with the periplasmic adaptor protein AcrA and the outer membrane channel TolC, the inner membrane component AcrB forms an efflux complex that spans both the inner and outer membrane and bridges the periplasm of the Gram-negative cell. Within the entire tripartite complex, homotrimeric AcrB plays a central role in energy transduction and substrate selection. In vitro selected designed ankyrin repeat proteins (DARPin) that specifically bind to the periplasmic domain of AcrB were shown to ameliorate diffraction resolution of AcrB/DARPin protein co-crystals (G. Sennhauser, P. Amstutz, C. Briand, O. Storchenegger, M.G. Grutter, Drug export pathway of multidrug exporter AcrB revealed by DARPin inhibitors, PLoS Biol 5 (2007) e7). Structural analysis by X-ray crystallography revealed that 2 DARPin molecules were bound to the trimeric AcrB wildtype protein in the crystal, whereas the V612F and G616N AcrB variant crystal structures show 3 DARPin molecules bound to the trimer. These specific stoichiometric differences were analyzed in solution via densitometry after microchannel electrophoresis, analytical ultracentrifugation and via laser-induced liquid bead ion desorption mass spectrometry (LILBID-MS). Using the latter technology, we investigated the gradual disassembly of the AcrB trimer and bound DARPin ligands in dependence on laser intensity in solution. At low laser intensity, the release of the detergent molecule micelle from the AcrB/DARPin complex was observed. By increasing laser intensity, dimeric and monomeric AcrB species with bound DARPin molecules were detected showing the high affinity binding of DARPin to monomeric AcrB species. High laser intensity LILBID MS experiments indicated a spectral shift of the monomeric AcrB peak of 3.1kDa, representing a low molecular weight ligand in all detergent-solubilized AcrB samples and in the AcrB crystal. The identity of this ligand was further investigated using phospholipid analysis of purified AcrB and AcrB variant samples, and indicated the presence of phosphatidylethanolamine and possibly cardiolipin, both constituents of the Escherichia coli membrane.

Mass Spectrometric Characterization of Oligomers in Pseudomonas aeruginosa Azurin Solutions

We have employed laser-induced liquid bead ion desorption mass spectroscopy (LILBID MS) to study the solution behavior of Pseudomonas aeruginosa azurin as well as two mutants and corresponding Re-labeled derivatives containing a Re(CO)(3)(4,7-dimethyl-1,10-phenanthroline)(+) chromophore appended to a surface histidine. LILBID spectra show broad oligomer distributions whose particular patterns depend on the solution composition (pure H(2)O, 20-30 mM NaCl, 20 and 50 mM NaP(i) or NH(4)P(i) at pH = 7). The distribution maximum shifts to smaller oligomers upon decreasing the azurin concentration and increasing the buffer concentration. Oligomerization is less extensive for native azurin than its mutants. The oligomerization propensities of unlabeled and Re-labeled proteins are generally comparable, and only Re126 shows some preference for the dimer that persists even in highly diluted solutions. Peak shifts to higher masses and broadening in 20-50 mM NaP(i) confirm strong azurin association with buffer ions and solvation. We have found that LILBID MS reveals the solution behavior of weakly bound nonspecific protein oligomers, clearly distinguishing individual components of the oligomer distribution. Independently, average data on oligomerization and the dependence on solution composition were obtained by time-resolved anisotropy of the Re-label photoluminescence that confirmed relatively long rotation correlation times, 6-30 ns, depending on Re-azurin and solution composition. Labeling proteins with Re-chromophores that have long-lived phosphorescence extends the time scale of anisotropy measurements to hundreds of nanoseconds, thereby opening the way for investigations of large oligomers with long rotation times.

Atmospheric Pressure Laser-Induced Acoustic Desorption Chemical Ionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry for the Analysis of Complex Mixtures

We present a novel nonresonant laser-based matrix-free atmospheric pressure ionization technique, atmospheric pressure laser-induced acoustic desorption chemical ionization (AP/LIAD-CI). The technique decouples analyte desorption from subsequent ionization by reagent ions generated from a corona discharge initiated in ambient air or in the presence of vaporized toluene as a CI dopant at room temperature. Analyte desorption is initiated by a shock wave induced in a titanium foil coated with electrosprayed sample, irradiated from the rear side by high-energy laser pulses. The technique enables facile and independent optimization of the analyte desorption, ionization, and sampling events, for coupling to any mass analyzer with an AP interface. Moreover, the generated analyte ions are efficiently thermalized by collisions with atmospheric gases, thereby reducing fragmentation. We have coupled AP/LIAD-CI to ultrahigh-resolution FT-ICR MS to generate predominantly [M + H](+) or M(+•) ions to resolve and identify thousands of elemental compositions from organic mixtures as complex as petroleum crude oil distillates. Finally, we have optimized the AP/LIAD CI process and investigated ionization mechanisms by systematic variation of placement of the sample, placement of the corona discharge needle, discharge current, gas flow rate, and inclusion of toluene as a dopant.

Laser-induced acoustic desorption/atmospheric pressure chemical ionization mass spectrometry.

Laser-induced acoustic desorption (LIAD) was successfully coupled to a conventional atmospheric pressure chemical ionization (APCI) source in a commercial linear quadrupole ion trap mass spectrometer (LQIT). Model compounds representing a wide variety of different types, including basic nitrogen and oxygen compounds, aromatic and aliphatic compounds, as well as unsaturated and saturated hydrocarbons, were tested separately and as a mixture. These model compounds were successfully evaporated into the gas phase by using LIAD and then ionized by using APCI with different reagents. From the four APCI reagent systems tested, neat carbon disulfide provided the best results. The mixture of methanol and water produced primarily protonated molecules, as expected. However, only the most basic compounds yielded ions under these conditions. In sharp contrast, using APCI with either neat benzene or neat carbon disulfide as the reagent resulted in the ionization of all the analytes studied to predominantly yield stable molecular ions. Benzene yielded a larger fraction of protonated molecules than carbon disulfide, which is a disadvantage. A similar but minor amount of fragmentation was observed for these two reagents. When the experiment was performed without a liquid reagent (nitrogen gas was the reagent), more fragmentation was observed. Analysis of a known mixture as well as a petroleum cut was also carried out. In summary, the new experiment presented here allows the evaporation of thermally labile compounds, both polar and nonpolar, without dissociation or aggregation, and their ionization to predominantly form stable molecular ions.

Sugar‐Decorated Dendritic Nanocarriers: Encapsulation and Release of the Octahedral Rhenium Cluster Complex [Re6S8(OH)6]4−

The encapsulation of a nanometer-sized octahedral anionic rhenium cluster complex with six terminal hydroxo ligands [Re(6)S(8)(OH)(6)](4-) in maltose-decorated poly(propylene amine) dendrimers (POPAM, generation 4 and 5) has been investigated. Ultrafiltration experiments showed that maximal loading capacity of the dendrimers with the cluster complex is achieved after about ten hours in aqueous solution. To study the inclusion phenomena, three different methods have been applied: UV/Vis, time-resolved laser-induced fluorescence spectroscopy (TRLFS), and laser-induced liquid bead ion desorption mass spectrometry (LILBID-MS). From the results obtained, it could be concluded that: a) the hydrolytic stability of the rhenium cluster complex is significantly enhanced in the presence of dendritic hosts; b) the cluster anions are preferentially bound inside the dendrimers; c) the number of cluster complexes encapsulated in the dendrimers increases with rising dendrimer generation. On average, four to five cluster anions can preferentially be captured in the interior of sugar-coated dendritic carriers. An asymptotic progression of the release of cluster complexes from the loaded dendrimers was observed under physiologically relevant conditions (isotonic sodium chloride solution: approximately 93 % within 4 days for loaded POPAM-G4-maltose; approximately 86 % within 4 days for loaded POPAM-G5-maltose). These encapsulation and release properties of maltose-decorated nanocarriers imply the possibility for the development of the next generation of dendritic nanocarriers with specific targeting of destined tissue for therapeutic treatments.

Characterization of nonpolar lipids and selected steroids by using laser-induced acoustic desorption/chemical ionization, atmospheric pressure chemical ionization, and electrospray ionization mass spectrometry

Laser-induced acoustic desorption (LIAD) combined with ClMn(H 2O) + chemical ionization (CI) was tested for the analysis of nonpolar lipids and selected steroids in a Fourier-transform ion cyclotron resonance mass spectrometer (FT-ICR). The nonpolar lipids studied, cholesterol, 5α-cholestane, cholesta-3,5-diene, squalene, and β-carotene, were found to solely form the desired water replacement product (adduct-H 2O) upon reaction with the ClMn(H 2O) + ions. The steroids, androsterone, dehydroepiandrosterone (DHEA), estrone, estradiol, and estriol, also form abundant adduct-H 2O ions, but less abundant adduct-2H 2O ions were also observed. Neither (+)APCI nor (+)ESI can ionize the saturated hydrocarbon lipid, cholestane. APCI successfully ionizes the unsaturated hydrocarbon lipids to form exclusively the intact protonated analytes. However, it causes extensive fragmentation for cholesterol and the steroids. The worst case is cholesterol that does not produce any stable protonated molecules. On the other hand, ESI cannot ionize any of the hydrocarbon analytes, saturated or unsaturated. However, ESI can be used to protonate the oxygen-containing analytes with substantially less fragmentation than for APCI in all cases except for cholesterol and estrone. In conclusion, LIAD/ClMn(H 2O) + chemical ionization is superior over APCI and ESI for the mass spectrometric characterization of underivatized nonpolar lipids and steroids.

The Archaeal Lsm Protein Binds to Small RNAs

Proteins of the Lsm family, including eukaryotic Sm proteins and bacterial Hfq, are key players in RNA metabolism. Little is known about the archaeal homologues of these proteins. Therefore, we characterized the Lsm protein from the haloarchaeon Haloferax volcanii using in vitro and in vivo approaches. H. volcanii encodes a single Lsm protein, which belongs to the Lsm1 subfamily. The lsm gene is co-transcribed and overlaps with the gene for the ribosomal protein L37e. Northern blot analysis shows that the lsm gene is differentially transcribed. The Lsm protein forms homoheptameric complexes and has a copy number of 4000 molecules/cell. In vitro analyses using electrophoretic mobility shift assays and ultrasoft mass spectrometry (laser-induced liquid bead ion desorption) showed a complex formation of the recombinant Lsm protein with oligo(U)-RNA, tRNAs, and an small RNA. Co-immunoprecipitation with a FLAG-tagged Lsm protein produced in vivo confirmed that the protein binds to small RNAs. Furthermore, the co-immunoprecipitation revealed several protein interaction partners, suggesting its involvement in different cellular pathways. The deletion of the lsm gene is viable, resulting in a pleiotropic phenotype, indicating that the haloarchaeal Lsm is involved in many cellular processes, which is in congruence with the number of protein interaction partners.

The Subunit Composition of Mitochondrial NADH:Ubiquinone Oxidoreductase (Complex I) From Pichia pastoris

Respiratory complex I (NADH:quinone oxidoreductase) is an entry point to the electron transport chain in the mitochondria of many eukaryotes. It is a large, multisubunit enzyme with a hydrophilic domain in the matrix and a hydrophobic domain in the mitochondrial inner membrane. Here we present a comprehensive analysis of the protein composition and post-translational modifications of complex I from Pichia pastoris, using a combination of proteomic and bioinformatic approaches. Forty-one subunits were identified in P. pastoris complex I, comprising the 14 core (conserved) subunits and 27 supernumerary subunits; seven of the core subunits are mitochondrial encoded. Three of the supernumerary subunits (named NUSM, NUTM, and NUUM) have not been observed previously in any species of complex I. However, homologues to all three of them are present in either Yarrowia lipolytica or Pichia angusta complex I. P. pastoris complex I has 39 subunits in common with Y. lipolytica complex I, 37 in common with N. crassa complex I, and 35 in common with the bovine enzyme. The mitochondrial encoded subunits (translated by the mold mitochondrial genetic code) retain their N-α-formyl methionine residues. At least eight subunits are N-α-acetylated, but the N-terminal modifications of the nuclear encoded subunits are not well-conserved. A combination of two methods of protein separation (SDS-PAGE and HPLC) and three different mass spectrometry techniques (peptide mass fingerprinting, tandem MS and molecular mass measurements) were required to define the protein complement of P. pastoris complex I. This requirement highlights the need for inclusive and comprehensive strategies for the characterization of challenging membrane-bound protein complexes containing both hydrophilic and hydrophobic components.

ChemInform Abstract: Surface Photochemistry of Divalent Metal Alkyls on SiO2

Metal‐alkyl molecules adsorbed on chemically prepared silicon surfaces have been studied using infrared total‐internal reflection and ultraviolet transmission spectroscopies, temperature‐programmed desorption spectroscopy (TPD), and mass spectroscopy of laser induced desorption (LID) products. For chemisorbed species, the surface hydroxyl groups have been shown to be the prime adsorption sites. In addition, we determined the identity of the chemisorbed species and their fragments under ultraviolet photodissociation. Surface photodissociation was observed to be strongly wavelength dependent at 193 and 248 nm.

Ad- and desorption of Rb atoms on a gold nanofilm measured by surface plasmon polaritons

Hybrid quantum systems made of cold atoms near nanostructured surfaces are expected to open up new opportunities for the construction of quantum sensors and for quantum information. For the design of such tailored quantum systems, the interaction of alkali atoms with dielectric and metallic surfaces is crucial and has to be understood in detail. Here, we present real-time measurements of the adsorption and desorption of rubidium atoms on gold nanofilms. Surface plasmon polaritons (SPP) are excited at the gold surface and detected in a phase-sensitive way. From the temporal change of the SPP phase, the rubidium coverage of the gold film is deduced with a sensitivity better than 0.3% of a monolayer. By comparing the experimental data with a Langmuir-type adsorption model, we obtain the thermal desorption constant and the sticking probability. In addition, laser-induced desorption is also observed and quantified.

Reactions of an Aromatic σ,σ-Biradical with Amino Acids and Dipeptides in the Gas Phase

Gas-phase reactivity of a positively charged aromatic σ,σ-biradical (N-methyl-6,8-didehydroquinolinium) was examined toward six aliphatic amino acids and 15 dipeptides by using Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR) and laser-induced acoustic desorption (LIAD). While previous studies have revealed that H-atom and NH(2) abstractions dominate the reactions of related monoradicals with aliphatic amino acids and small peptides, several additional, unprecedented reaction pathways were observed for the reactions of the biradical. For amino acids, these are 2H-atom abstraction, H(2)O abstraction, addition - CO(2), addition - HCOOH, and formation of a stable adduct. The biradical reacts with aliphatic dipeptides similarly as with aliphatic amino acids, but undergoes also one additional reaction pathway, addition/C-terminal amino acid elimination (addition - CO - NHCHR(C)). These reactions are initiated by H-atom abstraction by the biradical from the amino acid or peptide, or nucleophilic addition of an NH(2) or a HO group of the amino acid or peptide at the radical site at C-6 in the biradical. Reactions of the unquenched C-8 radical site then yield the products not observed for related monoradicals. The biradical reacts with aromatic dipeptides with an aromatic ring in N-terminus (i.e., Tyr-Leu, Phe-Val, and Phe-Pro) similarly as with aliphatic dipeptides. However, for those aromatic dipeptides that contain an aromatic ring in the C-terminus (i.e., Leu-Tyr and Ala-Phe), one additional pathway, addition/N-terminal amino acid elimination (addition - CO - NHCHR(N)), was observed. This reaction is likely initiated by radical addition of the biradical at the aromatic ring in the C-terminus. Related monoradicals add to aromatic amino acids and small peptides, which is followed by Cα-Cβ bond cleavage, resulting in side-chain abstraction by the radical. For biradicals, with one unquenched radical site after the initial addition, the reaction ultimately results in the loss of the N-terminal amino acid. Similar to monoradicals, the C-S bond in amino acids and dipeptides was found to be especially susceptible to biradical attack.

Effect of surface charge on laser-induced neutral atom desorption

When an ionic metal oxide crystal is cleaved, inhomogeneous electrical charging of the surface can be a result. Such an effect has been well documented in magnesium oxide (100). For example, recent rigorous AFM studies indicate that nanoscale charged clusters of MgO are created during cleavage, with high concentrations often located at terrace step edges (Barth and Henry in J. Phys. Chem. C 113:247, 2009). In addition, ablation processes of freshly cleaved magnesium oxide crystals may be effected by remnant surface charging and microstructures (Stoneham et al. in Appl. Phys. A 69:S81, 1999). We report here that such surface charging strongly impacts neutral atom desorption, even under conditions of extremely mild excitation of surface terrace features. In our experiments, single-crystal MgO (100) is cleaved in air and placed in an ultra-high vacuum chamber (UHV). We irradiate the crystal at 6.4 eV, photon energy resonant with five-coordinated (5-C) terrace sites and probe desorbing neutral oxygen atoms. It is found that a significant fraction of desorbed neutral oxygen atoms from the charged surface possess kinetic energies in excess of 0.7 eV. This is in contrast to uncharged samples (discharged in vacuo over 24 hours) that display a near-thermal oxygen atom distribution.

Wavelength sensitive photo-sensing from discrete crystalline tungsten oxide nanowires

In this work, electrical transport properties of discrete tungsten oxide nanowires and changes in their electrical properties in response to irradiation of laser beam were investigated. The tungsten oxide nanowires were found to exhibit photo-sensing property and the photo-induced modification in their electrical conductivity was found to be highly wavelength selective. Experiments carried out in controlled environment suggest that the observed wavelength selective photoresponse in these nanowires was due to laser-induced desorption of water and oxygen molecules from the nanowires which in turn resulted in a change in electrical conductivity of the nanowires.

The sticking of H2(v = 1, J = 1) on Cu(100) measured using laser-induced thermal desorption

The sticking of vibrationally excited H2 on Cu(100) is measured using molecular beam techniques and stimulated Raman scattering for state preparation. Laser Induced Thermal Desorption (LITD) is developed to measure surface hydrogen coverage by calibration with known H-coverages. We find that LITD can be effectively used to measure adsorbed hydrogen concentrations with a sensitivity of better that 1% of a monolayer. Sticking coefficients of H2 are determined from the ratio coverage to exposure. Measurements are made for H2 incident translational energies in the range of 74–189 meV. For the first excited vibrational state, we find and an upper limit of the H2 sticking coefficient to be 0.065 at E i = 74 meV and 0.17 at E i = 189 meV. These limits imply that previous measurements of loss of H2(v = 1) upon scattering from Cu(100) cannot be predominately a result of dissociative adsorption. The results are broadly consistent with results determined from quantum-state resolved measurements for recombinatative desorption and the principle of detailed balance for H2 from Cu(111).

Laser‐induced liquid bead ion desorption‐MS of protein complexes from blue‐native gels, a sensitive top‐down proteomic approach

We have developed an experimental approach that combines two powerful methods for proteomic analysis of large membrane protein complexes: blue native electrophoresis (BNE or BN-PAGE) and laser-induced liquid bead ion desorption (LILBID) MS. Protein complexes were separated by BNE and eluted from the gel. The masses of the constituents of the multiprotein complexes were obtained by LILBID MS, a detergent-tolerant method that is especially suitable for the characterisation of membrane proteins. High sensitivity and small sample volumes required for LILBID MS resulted in low demands on sample quantity. Eluate from a single band allowed assessing the mass of an entire multiprotein complex and its subunits. The method was validated with mitochondrial NADH:ubiquinone reductase from Yarrowia lipolytica. For this complex of 947 kDa, typically 30 microg or 32 pmol were sufficient to obtain spectra from which the subunit composition could be analysed. The resolution of this electrophoretic small-scale approach to the purification of native complexes was improved markedly by further separation on a second dimension of BNE. Starting from a subcellular fraction obtained by differential centrifugation, this allowed the purification and analysis of the constituents of a large multiprotein complex in a single LILBID spectrum.

Electrochemical Reactions and Ionization Processes

Electrochemical or photo-electrochemical reactions in both electrospray ionization and laser desorption ionization are discussed stressing the role of the electrode reaction in influencing the ionization process. In particular, upon application of a high voltage during electrospray ionization, the emitter includes a working electrode, where redox reactions are observed, such as electro-generation of benzoquinone and metal ions. In contrast, the target plate in laser-induced desorption ionization also acts as a photo-electrode, especially when modified with a mesoporous semiconductor. We illustrate here how these electrochemical reactions can be used for tagging purposes, and for oxidative or reductive dissociation reactions.

Laser-Induced Acoustic Desorption Coupled with a Linear Quadrupole Ion Trap Mass Spectrometer

In recent years, laser-induced acoustic desorption (LIAD) coupled with a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer has been demonstrated to provide a valuable technique for the analysis of a wide variety of nonvolatile, thermally labile compounds, including analytes that could not previously be analyzed by mass spectrometry. Although FT-ICR instruments are very powerful, they are also large and expensive and, hence, mainly used as research instruments. In contrast, linear quadrupole ion trap (LQIT) mass spectrometers are common due to several qualities that make these instruments attractive for both academic and industrial settings, such as high sensitivity, large dynamic range, and experimental versatility. Further, the relatively small size of the instruments, comparatively low cost, and the lack of a magnetic field provide some distinct advantages over FT-ICR instruments. Hence, we have coupled the LIAD technique with a commercial LQIT, the Thermo Fischer Scientific LTQ mass spectrometer. The LQIT was modified for a LIAD probe by outfitting the removable back plate of the instrument with a 6 in. ConFlat flange (CFF) port, gate valve, and sample lock. Reagent ions were created using the LQIT's atmospheric pressure ionization source and trapped in the mass analyzer for up to 10 s to allow chemical ionization reactions with the neutral molecules desorbed via LIAD. These initial experiments focused on demonstrating the feasibility of performing LIAD in the LQIT. Hence, the results are compared to those obtained using an FT-ICR mass spectrometer. Despite the lower efficiency in the transfer of desorbed neutral molecules into the ion trap, and the smaller maximum number of available laser pulses, the intrinsically higher sensitivity of the LQIT resulted in a higher sensitivity relative to the FT-ICR.

Laser techniques implementation for wall surface characterization and conditioning

Plasma-facing components (PFCs) at ITER are eroded and the material is transported by the edge plasma to areas with net deposition. The distribution, thickness and composition of layers formed will be strongly inhomogeneous. Current knowledge of the wall conditions is essential for a safe operation of ITER. To ensure operation within given margins methods have to be applied regularly to monitor the tritium inventory and deposited material and reduce it on occasion.Laser-based techniques might be suitable for the in situ characterization of the local wall condition of PFCs. Laser impact induces the release of particles, which are spectroscopically analysed. Codeposited hydrogen isotopes are measured by laser-induced desorption spectroscopy during a discharge. Laser-induced ablation spectroscopy and laser-induced breakdown spectroscopy can determine the material composition during and between discharges, respectively.Laser desorption and ablation can also be applied for wall conditioning at ITER using the remote handling arm.