Large Surface Area Research Articles

A novel electrochemical sensor based on a Cu-coordinated molecularly imprinted polymer and MoS2 modified chitin-derived carbon for selective detection of dextromethorphan.

Dextromethorphan (DXM) is a widely utilized central antitussive agent, which is frequently abused by individuals seeking its recreational effect. But DXM overdose can cause some adverse effects, including brain damage, loss of consciousness, and cardiac arrhythmias, and hence its detection is significant. Herein, an electrochemical sensor based on a Cu-coordinated molecularly imprinted polymer (Cu-MIP) was fabricated for its detection. For constructing the sensor, nitrogen-doped carbon nanosheets (CCNs) were prepared through calcining chitin under an argon atmosphere, and molybdenum disulfide (MoS2) was allowed to grow on their surface. Subsequently, the obtained MoS2/CCNs composite was employed to modify a glassy carbon electrode (GCE), and the Cu-MIP was electrodeposited on the electrode in a Cu-1,10-phenanthroline (Cu-Phen) solution containing DXM, where Cu2+ played a role in facilitating electron transfer and binding DXM. Due to the large specific surface area, good electrocatalytic properties and recognition of the resulting composite, the resulting Cu-MIP/MoS2/CCNs/GCE showed high selectivity and sensitivity. Under optimized experimental conditions, the peak current of DXM and its concentration exhibited a good linear relationship over the concentration range of 0.1-100 μM, and the limit of detection (S/N = 3) was 0.02 μM. Furthermore, the electrochemical sensor presented good stability, and it was successfully used for the determination of DXM in pharmaceutical, human serum and urine samples.

Metal-Organic Framework for Aluminum based Energy Storage Devices: Utilizing Redox Additives for Significant Performance Enhancement.

There are various methods being tried to address the sluggish kinetics observed in Al-ion batteries (AIBs). They mostly deal with morphology tuning, but have led to limited improvement. A new approach is proposed to overcome this limitation. It focuses on the use of a redox additive modified electrolyte in combination with framework like materials, which have wider channels. The ordered microporous and interconnected framework of ZIF 67, with large surface area, effectively facilitates the diffusion of aluminum ions. Therefore, AIBs are able to exhibit a superior discharge capacity of 288 mAh g-1 at 0.2 A g-1 current density with robust cycling stability. The addition of potassium ferricyanide as a redox-active species in an aqueous solution of aluminum chloride (supporting electrolyte) leads to significant enhancement in the specific capacity with much higher cycling stability. Al-ion based BatCap devices can be assembled by using ZIF 67 as the cathode, ZIF 67 derived porous carbon as the anode, and a redox additive modified electrolyte. The BatCap device exhibits excellent energy density of 86 Wh kg-1 at a power density of 2 KW kg-1, which is higher than reported aqueous AIBs. The ex situ characterization clearly explains the unexplored mechanism of redox additives in AIBs.

Developments of photo‐/electro‐catalysis based on covalent organic frameworks: A review

AbstractPhoto‐/electro‐catalysis has the characteristics of low cost, high performance, and zero pollution, which meet the policies on environment and energy. Covalent organic frameworks (COFs), a type of crystalline organic skeleton polymers, have been widely applied and investigated in the area of photo‐/electro‐catalysis owing to their advantages of large specific surface area, regular pore size, excellent stability, flexible structural design, and massive active sites. This article reviews the structural characteristics of COFs and the strategies for strengthening the photo‐/electro‐catalytic activity of COF materials. Subsequently, deep insights were put into the photo‐/electro‐catalysis application of COF materials. In the end, the development prospects and challenges faced by COF materials in photo‐/electro‐catalysis are discussed.

LDH-Based Voltammetric Sensors

Layered double hydroxides (LDHs), also named hydrotalcite-like compounds, are anionic clays with a lamellar structure which have been extensively used in the last two decades as electrode modifiers for the design of electrochemical sensors. These materials can be classified into LDHs containing or not containing redox-active centers. In the former case, a transition metal cation undergoing a reversible redox reaction within a proper potential window is present in the layers, and, therefore, it can act as electron transfer mediator, and electrocatalyze the oxidation of an analyte for which the required overpotential is too high. In the latter case, a negatively charged species acting as a redox mediator can be introduced into the interlayer spaces after exchanging the anion coming from the synthesis, and, again, the material can display electrocatalytic properties. Alternatively, due to the large specific surface area of LDHs, molecules with electroactivity can be adsorbed on their surface. In this review, the most significant electroanalytical applications of LDHs as electrode modifiers for the development of voltammetric sensors are presented, grouping them based on the two types of materials.

Porous Organic Framework Materials (MOF, COF, and HOF) as the Multifunctional Separator for Rechargeable Lithium Metal Batteries.

The separator is an important component in batteries, with the primary function of separating the positive and negative electrodes and allowing the free passage of ions. Porous organic framework materials have a stable connection structure, large specific surface area, and ordered pores, which are natural places to store electrolytes. And these materials with specific functions can be designed according to the needs of researchers. The performance of porous organic framework-based separators used in rechargeable lithium metal batteries is much better than that of polyethylene/propylene separators. In this paper, thethree most classic organic framework materials (MOF, COF, and HOF) are analyzed and summarized. The applications of MOF, COF, and HOF separators in lithium-sulfur batteries, lithium metal anode, and solid electrolytes are reviewed. Meanwhile, the research progress of these three materials in different fields is discussed based on time. Finally, in the conclusion, the problems encountered by MOF, COF, and HOF in different fields as well as their future research priorities are presented. This review will provide theoretical guidance for the design of porous framework materials with specific functions and further stimulate researchers to conduct research on porous framework materials.

High carbon dioxide emissions from Australian estuaries driven by geomorphology and climate

Estuaries play an important role in connecting the global carbon cycle across the land-to-ocean continuum, but little is known about Australia’s contribution to global CO2 emissions. Here we present an Australia-wide assessment, based on CO2 concentrations for 47 estuaries upscaled to 971 assessed Australian estuaries. We estimate total mean (±SE) estuary CO2 emissions of 8.67 ± 0.54 Tg CO2-C yr−1, with tidal systems, lagoons, and small deltas contributing 94.4%, 3.1%, and 2.5%, respectively. Although higher disturbance increased water-air CO2 fluxes, its effect on total Australian estuarine CO2 emissions was small due to the large surface areas of low and moderately disturbed tidal systems. Mean water-air CO2 fluxes from Australian small deltas and tidal systems were higher than from global estuaries because of the dominance of macrotidal subtropical and tropical systems in Australia, which have higher emissions due to lateral inputs. We suggest that global estuarine CO2 emissions should be upscaled based on geomorphology, but should also consider land-use disturbance, and climate.

Multiple-component covalent organic frameworks for simultaneous extraction and determination of multitarget pollutants in sea foods

Persistent organic pollutants (POPs), such as perfluoroalkyl and polyfluoroalkyl substances (PFASs), polychlorinated biphenyls (PCBs), and bisphenols (BPs), have been raising global concerns due to their toxic effects on environment and human health. The monitoring of residues of POPs in seafood is crucial for assessing the accumulation of these contaminants in the study area and mitigating potential risks to human health. However, the diversity and complexity of POPs in seafood present significant challenges for their simultaneous detection. Here, a novel multi-component fluoro-functionalized covalent organic framework (OH-F-COF) was designed as SPE adsorbent for simultaneous extraction POPs. On this basis, the recognition and adsorption mechanisms were investigated by molecular simulation. Due to multiple interactions and large specific surface area, OH-F-COF displayed satisfactory coextraction performance for PFASs, PCBs, and BPs. Under optimized conditions, the OH-F-COF sorbent was employed in a strategy of simultaneous extraction and stepwise elution (SESE), in combination with HPLC−MS/MS and GC−MS method, to effectively determined POPs in seafood collected from coastal areas of China. The method obtained low detection limits for BPs (0.0037 −0.0089 ng/g), PFASs (0.0038 −0.0207 ng/g), and PCBs (0.2308 −0.2499 ng/g), respectively. This approach provided new research ideas for analyzing and controlling multitarget POPs in seafood. Environmental implicationsPersistent organic pollutants (POPs), such as perfluoroalkyl and polyfluoroalkyl substances (PFASs), polychlorinated biphenyls (PCBs), and bisphenols (BPs), have caused serious hazards to human health and ecosystems. Hence, there is a need to develop a quantitative method that can rapidly detect POPs in environmental and food samples. Herein, a novel multi-component fluorine-functionalized covalent organic skeletons (OH-F-COF) were prepared at room temperature, and served as adsorbent for POPs. The SESE-SPE strategy combined with chromatographic techniques was used to achieve a rapid detection of POPs in sea foods from the coastal provinces of China. This method provides a valuable tool for analyzing POPs in environmental and food samples.

Preparation of Heterogeneous Fenton Catalysts Cu-Doped MnO2 for Enhanced Degradation of Dyes in Wastewater

Herein, a series of heterogeneous Fenton catalysts, Cu doped MnO2 (CDM), with different Cu/Mn molar ratios were prepared via a hydrothermal reaction. Meanwhile, detailed characterizations were used to study the structures of CDM, and it is amazing that the morphology of CDM changed from nanowires to nanoflowers with an increasing amount of Cu doped. Apart from this, both the specific surface area and oxygen vacancy increased obviously with the increasing Cu/Mn molar ratio. Then, the degradation of different dyes was utilized to evaluate the catalytic activity of different CDM with H2O2 used as the oxidizing agent, and the 50%-CDM with the highest content of Cu doped displayed the best catalytic activity. Herein, the degradation efficiency (D%) of Congo red (CR) solution with low concentration (60 mg/L) reached 100% in 3 min, while the D% of CR solution with a high concentration (300 mg/L) reached 99.4% after 5 min with a higher dosage of H2O2. Additionally, the 50%-CDM also displayed excellent reusability, for which the D% values were still higher than 90% after the 14th cycles. Based on the structure characteristics and mechanism analysis, the excellent catalytic capacity of 50%-CDM was due to the combined influence of large specific surface area and abundant oxygen vacancy. Thus, a promising heterogeneous Fenton catalyst was developed in this study, which proved the treatment efficiency of actual dye wastewater.

Incorporating ZIF-8-derived ZnSe into hollow carbon nanospheres as anodes for lithium-ion batteries

Transition metal selenides (TMSs) show great potential as anode materials for lithium-ion batteries (LIBs), boasting a high theoretical capacity. Nevertheless, their practical utility faces challenges, mainly stemming from significant volume changes that lead to rapid capacity decay during charge and discharge cycles. To overcome this challenge, we present a systematic approach involving the growth of uniformly dispersed ultrafine ZnSe nanoparticles derived from ZIF-8 on the surface of hollow carbon nanospheres (ZnSe@N-HCS/700). When utilized as an anode material for LIBs, the ZnSe@N-HCS/700 electrode demonstrates exceptional electrochemical performance. Specifically, it achieves a capacity of 1299 mAh g−1 after 100 cycles at a current density of 100 mA g−1 and maintains a capacity of 614 mAh g−1 even after 1800 cycles at 2500 mA g−1. The hollow structure of the composite alleviates the volume variation of ZnSe nanoparticles during charge and discharge processes, and provides a large reactive surface area, thereby significantly enhancing lithium storage capacity. In conclusion, our strategy presents an innovative approach to synthesize negative electrode materials with unique structures for LIBs.

MOF-on-MOF-derived Fe[sbnd]Zr bimetal oxides supported on hierarchically porous carbonized wood to promote photo-Fenton degradation of ciprofloxacin

MOF-on-MOF derivatives have served as promising heterogeneous Photo-Fenton (hetero-PF) catalysts, but its self-aggregation instability and limited photocatalytic activity inhibit the effective ciprofloxacin (CIP) removal. In this study, a novel hetero-PF catalyst, dual MOF-derived FeZr bimetal oxide embedded in a wood-converted porous carbon skeleton (ZrO2@Fe3O4/WPC), was successfully synthesized via a straightforward in-situ growth strategy combined with co-pyrolysis. The as-prepared hybrid photocatalysts, featuring a large surface area, effective porous structures, efficient light absorption and a narrow band gap demonstrated superior photo-Fenton activity, accomplishing approximately 99.1 % degradation of CIP within 120 min under neutral conditions. Furthermore, the ZrO2@Fe3O4/WPC hetero-PF system showed satisfactory performance in treating real water matrices. It can be inferred that the abundant heterojunctions, resulting from the synergistic effect of FeZr mixed oxide and the porous carbonized wood substrate, contributed to the rapid separation and migration of photogenerated electron-hole pairs. Meanwhile, the FeZr site in the graphitized carbon framework activates H2O2 to accelerate the generation of the OH and O2− radicals, leading to a heightened degradation efficiency of CIP. Besides, the photodegradation pathway of CIP is obtained by liquid chromatography-mass spectrometry (LC-MS). This study indicates that combining porous carbonized wood and heterometallic MOF derived materials provides a promising method for realizing high-efficiency photo-Fenton degradation of antibiotic water pollutions.

Pickering Emulsions Biocatalysis: Recent Developments and Emerging Trends.

Biocatalysis within biphasic systems is gaining significant attention in the field of synthetic chemistry, primarily for its ability to solve the problem of incompatible solubilities between biocatalysts and organic compounds. By forming an emulsion from these two-phase systems, a larger surface area is created, which greatly improves the mass transfer of substrates to the biocatalysts. Among the various types of emulsions, Pickering emulsions stand out due to their excellent stability, compatibility with biological substances, and the ease with which they can be formed and separated. This makes them ideal for reusing both the emulsifiers and the biocatalysts. This review explores the latest developments in biocatalysis using Pickering emulsions. It covers the structural features, methods of creation, innovations in flow biocatalysis, and the role of interfaces in these processes. Additionally, the challenges and future directions are discussed in combining chemical and biological catalysts within Pickering emulsion frameworks to advance synthetic methodologies.

Graphite sheet-supported bimetallic RhNi thin film alloys for enhanced and durable hydrogen evolution in acidic environments

Noble metal-based materials are excellent catalysts for hydrogen production from water electrolysis, but their high cost and limited availability hinder widespread use. However, precious metals can be effectively utilized in catalysts by forming alloys with low-cost 3d transition metals, thereby reducing the need for precious metals, while enhancing the performance. In this study, aerosol-assisted chemical vapor deposition was employed to deposit bimetallic rhodium-nickel (RhNi) alloy thin films on a graphite sheet for hydrogen evolution reaction (HER) catalysis in a 0.5 M H2SO4 solution. Thin-film morphological patterns were significantly changed as the deposition time varied from 45 to 135 min. The RhNi alloy fabricated for 90 min outperformed its counterparts, displaying lower overpotential of 40 and 197 mV at 10 and 1000 mA cm−2, small Tafel kinetics (54 mV dec−1), high conductivity (0.57 Ω) and large electrochemical surface area (3312 cm2), and extended stability (48 h) compared to pure Rh metal and other reported catalysts. The superior HER performance arises from the synergistic effects between Rh and Ni metals, coupled with a uniform layer of spherical particles that enhance conductive properties and reaction rates by providing maximized active sites on graphite surface. This work provides valuable guidelines for efficiently preparing highly active and durable thin-film electrocatalyst within short time span and applying directly in fuel cell for hydrogen production.

“Green” one-pot synthesis of hemin complex with excellent peroxidase activity: Efficient enhanced chemiluminescence immunosensor for ultrasensitive detection of ochratoxin A

Compared with natural enzymes, nanozymes have the advantages of easy preparation, low cost and high stability. With the booming development of nanozymes, scientists have further defined them as “nanomaterials with enzyme-like properties”. Here, on the one hand, ZIF-L has the characteristics of simple preparation, good stability and large specific surface area. Meanwhile, the array structure of Zn2+ and imidazole in the ZIF-L can replace the amino acids precisely located in the natural enzymes, thus mimicking the microenvironment of the natural peroxidase. On the other hand, based on the chemical similarity of hemin to natural heme, we encapsulated hemin into the ZIF-L backbone by a straightforward “green” one-pot technique. According to the symbiotic stability-enhancing effect, the encapsulated biomolecules can make the ZIF-L matrix more stable while the ZIF-L backbone protects the enzyme from denaturation. Based on this, ZIF-L-Hemin composites with excellent peroxidase properties was successfully prepared. Using ZIF-L-Hemin composites, we constructed a flow-injection chemiluminescence immunoassay for the quick and ultrasensitive detection of ochratoxin A (OTA) in food. The experimental results showed that the detection range of OTA was 0.0015 ∼ 1500 ng mL−1, and the limit of detection (LOD) was 0.47 pg mL−1 (S/N = 3). The OTA analysis of wheat, corn and feed samples showed that the recoveries ranged from 80.83 % to 115.54 %, which successfully demonstrated the usability and potential applications of immunosensor.

Molecularly Imprinted Polymer Biosensor Based on Nitrogen-Doped Electrochemically Exfoliated Graphene/Ti3 CNTX MXene Nanocomposite for Metabolites Detection.

Rapid and accurate quantification of metabolites in different bodily fluids is crucial for a precise health evaluation. However, conventional metabolite sensing methods, confined to centralized laboratory settings, suffer from time-consuming processes, complex procedures, and costly instrumentation. Introducing the MXene/nitrogen-doped electrochemically exfoliated graphene (MXene@N-EEG) nanocomposite as a novel biosensing platform in this work addresses the challenges associated with conventional methods, leveraging the concept of molecularly imprinted polymers (MIP) enables the highly sensitive, specific, and reliable detection of metabolites. To validate our biosensing technology, we utilize agmatine as a significant biologically active metabolite. The MIP biosensor incorporates electrodeposited Prussian blue nanoparticles as a redox probe, facilitating the direct electrical signaling of agmatine binding in the polymeric matrix. The MXene@N-EEG nanocomposite, with excellent metal conductivity and a large electroactive specific surface area, effectively stabilizes the electrodeposited Prussian blue nanoparticles. Furthermore, increasing the content of agmatine-imprinted cavities on the electrode enhances the sensitivity of the MIP biosensor. Evaluation of the designed MIP biosensor in buffer solution and plasma samples reveals a wide linear concentration range of 1.0 nM-100.0 μM (R2 = 0.9934) and a detection limit of 0.1 nM. Notably, the developed microfluidic biosensor offers low cost, rapid response time to the target molecule (10 min of sample incubation), good recovery results for detecting agmatine in plasma samples, and acceptable autonomous performance for on-chip detection. Moreover, its high reliability and sensitivity position this MIP-based biosensor as a promising candidate for miniaturized microfluidic devices with the potential for scalable production for point-of-care applications.

Floatable Cu2(OH)PO4/rGO Aerogel for Full Spectrum Driven Photocatalytic Degradation of Organic Pollutants.

Photocatalytic technology is an attractive option for environmental remediation because of its green and sustainable nature. However, the inefficient utilization of solar energy and powder morphology currently impede its practical application. Here, we designed a floatable photocatalyst by anchoring 0D Cu2(OH)PO4 (CHP) nanoparticles on 2D graphene to construct 0D/2D CHP/reduced graphene oxide (rGO) aerogels. The CHP/rGO aerogels have interconnected mesopores that provide a large surface area, promoting particle dispersion and increasing the number of active sites. Moreover, the optical response of the CHP/rGO aerogel has been significantly expanded to cover the full spectrum of the solar light. Notably, the 20%CHP/rGO aerogel displayed a high degradation rate (k = 0.178 min-1) taking methylene blue (MB) as a model pollutant under light irradiation (λ > 420 nm). The enhanced photocatalytic activity is ascribed to the rapid electron transfer in the CHP/rGO heterostructures, as supported by the DFT theoretical calculations. Our research highlights the utilization of full spectrum responsive photocatalysts for the elimination of organic pollutants from wastewater under solar light irradiation, as well as the potential for catalyst recovery using floatable aerogels to meet industrial requirements.

A high-efficiency clay mineral based organic photocatalyst towards photodegradation of butyl xanthate in mineral processing wastewater

The organic solar cell active layer, well known for excellent visible light response capability, is regarded as a potential candidate for photocatalytic degradation of organic wastewater. However, the poor dispersibility in water due to its hydrophobicity property severely limited the degrading efficiency. In this work, a novel composite photocatalyst PM6:IDT8CN-M/CK2 with a broad visible absorption spectrum and non-toxicity was first synthesized through the intercalation compounding method. A good dispersibility of PM6:IDT8CN-M in wastewater was achieved with the help of rich interlamellar porosity and good hydrophilicity of calcined kaolin. This composite photocatalyst was successfully applied to the SBX photocatalytic degradation in mineral processing wastewater, and the SBX pollutants can be completely degraded within 10 min under the condition of visible light irradiation. Compared with other reported photocatalysts, the photocatalytic degradation efficiency of SBX was dramatically improved by at least seven times. Moreover, PM6:IDT8CN-M/CK2 has remarkable stability, sustaining degradation efficiencies of over 90 % in 60 cycles. Notably, the organic solar cell active layer in PM6:IDT8CN-M/CK2 can achieve carrier rapid separation and transport, enhancing the generation of active oxides (∙O2–, and ∙OH, etc.). At the same time, the large surface area of PM6:IDT8CN-M/CK2 provides a suitable environment for the oxidation reaction of active radicals with SBX to achieve this efficient photocatalytic degradation. Overall, this work not only extends the application scope of organic solar cell active layer, but also develops a high-efficiency SBX removal technique for the treatment of mineral processing wastewater.

Sonochemical synthesis of bioinspired graphene oxide–zinc oxide hydrogel for antibacterial painting on biodegradable polylactide film

Graphene oxide nanosheet (GO) is a multifunctional platform for binding with nanoparticles and stacking with two dimensional substrates. In this study, GO nanosheets were sonochemically decorated with zinc oxide nanoparticles (ZnO) and self-assembled into a hydrogel of GO–ZnO nanocomposite. The GO–ZnO hydrogel structure is a bioinspired approach for preserving graphene-based nanosheets from van der Waals stacking. X-ray diffraction analysis (XRD) showed that the sonochemical synthesis led to the formation of ZnO crystals on GO platforms. High water content (97.2%) of GO–ZnO hydrogel provided good property of ultrasonic dispersibility in water. Ultraviolet-visible spectroscopic analysis (UV–vis) revealed that optical band gap energy of ZnO nanoparticles (∼3.2 eV) GO–ZnO nanosheets (∼2.83 eV). Agar well diffusion tests presented effective antibacterial activities of GO–ZnO hydrogel against gram-negative bacteria (E. coli) and gram-positive bacteria (S. aureus). Especially, GO–ZnO hydrogel was directly used for brush painting on biodegradable polylactide (PLA) thin films. Graphene-based nanosheets with large surface area are key to van der Waals stacking and adhesion of GO–ZnO coating to the PLA substrate. The GO–ZnO/PLA films were characterized using photography, light transmittance spectroscopy, coating stability, scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopic mapping (EDS), antibacterial test and mechanical tensile measurement. Specifically, GO–ZnO coating on PLA substrate exhibited stability in aqueous food simulants for packaging application. GO–ZnO coating inhibited the infectious growth of E. coli biofilm. GO–ZnO/PLA films had strong tensile strength and elastic modulus. As a result, the investigation of antibacterial GO–ZnO hydrogel and GO–ZnO coating on PLA film is fundamental for sustainable development of packaging and biomedical applications.

Strong and Hierarchical Ni(OH)2/Ni/rGO Composites as Multifunctional Catalysts for Excellent Water Splitting

The lack of efficient and non-precious metal catalysts poses a challenge for electrochemical water splitting in hydrogen and oxygen evolution reactions. Here, we report on the preparation of growing Ni(OH)2 nanosheets in situ on a Ni and graphene hybrid using supergravity electrodeposition and the hydrothermal method. The obtained catalyst displays outstanding performance with small overpotentials of 161.7 and 41 mV to acquire current densities of 100 and 10 mA cm−2 on hydrogen evolution reaction, overpotentials of 407 and 331 mV to afford 100 and 50 mA cm−2 on oxygen evolution reaction, and 10 mA·cm−2 at a cell voltage of 1.43 V for water splitting in 1 M KOH. The electrochemical activity of the catalyst is higher than most of the earth-abundant materials reported to date, which is mainly due to its special hierarchical structure, large surface area, and good electrical conductivity. This study provides new tactics for enhancing the catalytic performance of water electrolysis.

Biochar – a sustainable soil conditioner for improving soil health, crop production and environment under changing climate: a review

Land degradation and climate change, two intricately intertwined phenomena, demand appropriate management solutions to effectively tackle the escalating issues of food and nutritional security. In this context, the realm of agriculture confronts formidable challenges in its pursuit of soil resource reclamation, improving water quality, mitigating climate change, and maintaining soil and natural resources for posterity. Central to these aspirations is the preservation of an optimum organic matter, serving as a linchpin threshold is crucial for protecting the physical, chemical, and biological integrity of the soil, while simultaneously sustaining agricultural productivity. To address these multifaceted challenges, the introduction of diverse organic amendments has emerged as a crucial strategy. Noteworthy among these is the application of biochar, which functions as a soil conditioner capable of bolstering soil health, mitigating the impact of climate change, and securing global food security. Biochar is a carbon-enriched substance produced through pyrolysis of assorted biomass waste. It has a larger surface area, higher cation exchange capacity, and an extended carbon storage capability. The strategic integration of biochar production and subsequent soil application engenders an array of benefits, encompassing the amelioration of soil physical properties, augmented retention and the availability of nutrients, and the enhancement of biological activity, resulting in higher agricultural yields and societal benefits through the curtailment of soil to atmosphere greenhouse gas emissions. Additionally, biochar demonstrates its efficacy in the realm of environmental restoration by serving as a medium for extraction and elimination of heavy metals, which often pervade aquatic ecosystems and soil matrices. This review addressed the need for biochar production, characterization, soil health, the possibility for environmental restoration, and crop yield fluctuations owing to climate change.

MOF‐derived Porous Carbon for Zinc‐ion Hybrid Capacitors with Ultra‐high Energy Density and Long Cycling Life

Zinc‐ion hybrid capacitors (ZHC) have been considered as emerging sustainable electrochemical energy storage devices. They integrate the benefits of high‐energy density of aqueous zinc ion battery (ZIB) with high‐power density of supercapacitor (SC). Metal‐organic frameworks (MOFs) have been widely used to design electrode materials for portable devices, especially in some energy storage fields because of their large specific surface area and adjustable pore structures. In this work, we prepare porous Mn3O4/C nanosheets with Mn‐BDC as a precursor. The assembled device delivers a specific capacitance of 155.3 mAh g‐1 at a current of 3 A g‐1 and keeps a retention rate of 97.7% after 10,000 cycles. Moreover, it provides an energy density of 464.5 Wh kg‐l at a power density of 100 W kg‐1.