Large Specific Surface Area Research Articles

Molecularly Imprinted Polymer Biosensor Based on Nitrogen-Doped Electrochemically Exfoliated Graphene/Ti3 CNTX MXene Nanocomposite for Metabolites Detection.

Rapid and accurate quantification of metabolites in different bodily fluids is crucial for a precise health evaluation. However, conventional metabolite sensing methods, confined to centralized laboratory settings, suffer from time-consuming processes, complex procedures, and costly instrumentation. Introducing the MXene/nitrogen-doped electrochemically exfoliated graphene (MXene@N-EEG) nanocomposite as a novel biosensing platform in this work addresses the challenges associated with conventional methods, leveraging the concept of molecularly imprinted polymers (MIP) enables the highly sensitive, specific, and reliable detection of metabolites. To validate our biosensing technology, we utilize agmatine as a significant biologically active metabolite. The MIP biosensor incorporates electrodeposited Prussian blue nanoparticles as a redox probe, facilitating the direct electrical signaling of agmatine binding in the polymeric matrix. The MXene@N-EEG nanocomposite, with excellent metal conductivity and a large electroactive specific surface area, effectively stabilizes the electrodeposited Prussian blue nanoparticles. Furthermore, increasing the content of agmatine-imprinted cavities on the electrode enhances the sensitivity of the MIP biosensor. Evaluation of the designed MIP biosensor in buffer solution and plasma samples reveals a wide linear concentration range of 1.0 nM-100.0 μM (R2 = 0.9934) and a detection limit of 0.1 nM. Notably, the developed microfluidic biosensor offers low cost, rapid response time to the target molecule (10 min of sample incubation), good recovery results for detecting agmatine in plasma samples, and acceptable autonomous performance for on-chip detection. Moreover, its high reliability and sensitivity position this MIP-based biosensor as a promising candidate for miniaturized microfluidic devices with the potential for scalable production for point-of-care applications.

MOF‐derived Porous Carbon for Zinc‐ion Hybrid Capacitors with Ultra‐high Energy Density and Long Cycling Life

Zinc‐ion hybrid capacitors (ZHC) have been considered as emerging sustainable electrochemical energy storage devices. They integrate the benefits of high‐energy density of aqueous zinc ion battery (ZIB) with high‐power density of supercapacitor (SC). Metal‐organic frameworks (MOFs) have been widely used to design electrode materials for portable devices, especially in some energy storage fields because of their large specific surface area and adjustable pore structures. In this work, we prepare porous Mn3O4/C nanosheets with Mn‐BDC as a precursor. The assembled device delivers a specific capacitance of 155.3 mAh g‐1 at a current of 3 A g‐1 and keeps a retention rate of 97.7% after 10,000 cycles. Moreover, it provides an energy density of 464.5 Wh kg‐l at a power density of 100 W kg‐1.

Gas Sensors Based on Semiconductor Metal Oxides Fabricated by Electrospinning: A Review

Electrospinning has revolutionized the field of semiconductor metal oxide (SMO) gas sensors, which are pivotal for gas detection. SMOs are known for their high sensitivity, rapid responsiveness, and exceptional selectivity towards various types of gases. When synthesized via electrospinning, they gain unmatched advantages. These include high porosity, large specific surface areas, adjustable morphologies and compositions, and diverse structural designs, improving gas-sensing performance. This review explores the application of variously structured and composed SMOs prepared by electrospinning in gas sensors. It highlights strategies to augment gas-sensing performance, such as noble metal modification and doping with transition metals, rare earth elements, and metal cations, all contributing to heightened sensitivity and selectivity. We also look at the fabrication of composite SMOs with polymers or carbon nanofibers, which addresses the challenge of high operating temperatures. Furthermore, this review discusses the advantages of hierarchical and core-shell structures. The use of spinel and perovskite structures is also explored for their unique chemical compositions and crystal structure. These structures are useful for high sensitivity and selectivity towards specific gases. These methodologies emphasize the critical role of innovative material integration and structural design in achieving high-performance gas sensors, pointing toward future research directions in this rapidly evolving field.

Fabrication of lignosulfonate-derived porous carbon via pH-tunable self-assembly strategy for efficient atrazine removal

Herein, a straightforward protocol was developed for the one-pot synthesis of N-doped lignosulfonate-derived carbons (NLDCs) with a tunable porous structure using natural amino acids-templated self-assembly strategy. Specifically, histidine was employed as a template reagent, leading to the preparation of 10-NLDC-21 with remarkable characteristics, including the large specific surface area (SBET = 1844.5 m2/g), pore volume (Vmes = 1.22 cm3/g) and efficient adsorption for atrazine (ATZ) removal. The adsorption behavior of ATZ by NLDCs followed the Langmuir and pseudo-second-order models, suggesting a monolayer chemisorption nature of ATZ adsorption with the maximum adsorption capacity reached up to 265.77 mg/g. Furthermore, NLDCs exhibited excellent environmental adaptability and recycling performance. The robust affinity could be attributed to multi-interactions including pore filling, electrostatic attraction, hydrogen bonding and π-π stacking between the adsorbents and ATZ molecules. This approach offers a practical method for exploring innovative bio-carbon materials for sewage treatment.

In situ surface etching strategy for bimetallic MOFs-derived oxides and their catalytic properties

MOFs and their derivatives are excellent carriers with large specific surface area. Here, we propose a new strategy to engineer a supported-Pt core shell MOF-derived metal oxide catalyst. In this work, ZnCo-glycol microspheres were used as sacrificial templates, and the pre-prepared Pt nanoparticles were modified in MOFs during the in situ surface etching strategy. Compared to the ZnCo-2MI-330 and ZnCo–Pt-330, ZnCo–Pt-2MI-330 presents good catalytic activity (T10 = 110 °C,T90 = 123 °C) and excellent stability on CO oxidation reaction. By detailed characterization, ZnCo–Pt-2MI-330 remains the original pore structure of MOFs and provides a larger specific surface area, while the addition of Pt NPs changes the content of active species (the high ratio of Co3+ and active oxygen species) in the metal oxides. More importantly, the strategy effectively improves the noble metal catalysts are apt to lose their activities during the thermal catalytic caused by the serious working environment.

Carbothermal reduction between MOF-derived carbon and spent battery powder for metal recovery: Thermogravimetric behavior and kinetic analysis

The combined hydrometallurgical and pyrometallurgical process is an innovative method for recycling spent batteries. This process includes a carbothermic reduction step that reduces the valence of valuable metals in the batteries, facilitating subsequent leaching, which is a crucial stage in the recycling process. Additionally, the use of new carbon materials in electrode materials for ternary lithium batteries, referred to as LIBs, is increasing. These materials typically have high porosity and a large specific surface area. In this study, two types of nanoporous carbon (NC) commonly used in electrodes, namely Al-PCP-800 and ZIF-8–800, were prepared to investigate their effects on the carbothermic reduction stage of recycling spent batteries. The carbothermal reduction reactions of spent LIBs powder mixed with activated carbon and the two types of NC were examined using a thermogravimetric balance (TG/DTG). Kinetic characteristics were calculated in the interval of maximum weight loss rate using five kinetic models: VM, RPM, URCM, KAS, and FWO. The kinetic analysis revealed that the KAS and FWO models, which exhibited higher correlation coefficients, more accurately described the carbothermic reduction reactions. TG analysis showed that the sample mixed with 25 % ZIF-8–800 achieved the lowest temperature at the weight loss peak for the maximum weight loss rate, 769°C at a heating rate of 20 °C/min. Additionally, the reaction activity of NC with the positive material in the spent LIBs powder was stronger than that of activated carbon. Among the models, the sample mixed with 25 % ZIF-8–800 exhibited the lowest activation energies, recorded at 171.83, 28.48, 122.22, 199.49, and 143.45 kJ/mol, respectively. XRD and XPS characterizations of the roasted products from the spent LIBs powder mixed with the three carbon materials at various roasting end temperatures demonstrated that the cathode materials initially decomposed into Mn3O4, NiO, CoO, Li2O, and Li2CO3. At higher temperatures, Mn3O4, NiO, and CoO were further reduced to MnO, pure metallic Co, and pure metallic Ni, respectively. The sample mixed with ZIF-8–800 showed the most substantial reduction of metallic elements, with the relative contents of pure metallic Ni, pure metallic Co, and low-valent Mn elements reaching 5.50 %, 4.41 %, and 71.29 %, respectively, at a final roasting temperature of 800 °C. Therefore, NC demonstrated greater reactivity in the reduction reactions with the cathode material in the spent LIBs powder, ranking in the order of ZIF-8–800 > Al-PCP-800 > activated carbon.

Activating Angiogenesis and Immunoregulation to Propel Bone Regeneration via Deferoxamine-Laden Mg-Mediated Tantalum Oxide Nanoplatform.

Vascularization and inflammation management are essential for successful bone regeneration during the healing process of large bone defects assisted by artificial implants/fillers. Therefore, this study is devoted to the optimization of the osteogenic microenvironment for accelerated bone healing through rapid neovascularization and appropriate inflammation inhibition that were achieved by applying a tantalum oxide (TaO)-based nanoplatform carrying functional substances at the bone defect. Specifically, TaO mesoporous nanospheres were first constructed and then modified by functionalized metal ions (Mg2+) with the following deferoxamine (DFO) loading to obtain the final product simplified as DFO-Mg-TaO. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the product was homogeneously dispersed hollow nanospheres with large specific surface areas and mesoporous shells suitable for loading Mg2+ and DFO. The biological assessments indicated that DFO-Mg-TaO could enhance the adhesion, proliferation, and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The DFO released from DFO-Mg-TaO promoted angiogenetic activity by upregulating the expressions of hypoxia-inducible factor-1 (HIF-1α) and vascular endothelial growth factor (VEGF). Notably, DFO-Mg-TaO also displayed anti-inflammatory activity by reducing the expressions of pro-inflammatory factors, benefiting from the release of bioactive Mg2+. In vivo experiments demonstrated that DFO-Mg-TaO integrated with vascular regenerative, anti-inflammatory, and osteogenic activities significantly accelerated the reconstruction of bone defects. Our findings suggest that the optimized DFO-Mg-TaO nanospheres are promising as multifunctional fillers to speed up the bone healing process.

The Synthesis of Amino-Acid-Anchored Two-Dimensional Silicoaluminophosphates and Congo Red Adsorption Application.

Two-dimensional (2D) materials with nanometer thickness have the advantage of a large specific surface area and excellent surface accessibility. They have great potential for adsorption, catalysis, and many other applications. 2D zeolitic silicoaluminophosphates (SAPOs) can be synthesized through a dual structure directing agent (SDA) strategy. But the materials have been primarily used in their organic-free form. In this work, we demonstrate that the same synthesis strategy is effective for developing amino-acid-anchored 2D SAPOs through a one-step synthesis. Because of the addition of amino acids, the surficial amino and carboxylic groups serve as active sites for adsorption and catalysis. Congo red adsorption is used to evaluate the potential of using the organic functional groups as active adsorption sites. The 2D SAPO materials have demonstrated excellent Congo red removal efficiency with close to complete removal for certain concentrations. The effects of the amino acid concentration and hydrothermal synthesis time on material morphology development will be discussed. Thorough characterization by SEM, TEM, FTIR, XRD, and nitrogen adsorption has been done to reveal the properties of the amino-acid-anchored 2D SAPOs.

Effect of morphology on the performance of MnOx catalysts for selective catalytic reduction of NO with NH3

Modulating the physicochemical properties of catalysts through the construction of special crystal structures or microscopic morphology provides new insights for developing high-performance low-temperature denitrification catalysts. This paper explores the effect of morphology structure on catalyst performance and identifies the dominant driving factors. The catalyst activity sequence was found to be MnOx spiny nanospheres (Mn-SNS) > MnOx nanowires (Mn-N) > MnOx nanospheres (Mn-NS) > MnOx nanoparticles (Mn-P). Among these, the Mn-SNS catalyst prepared by the hydrothermal method exhibited the best catalytic activity and the good resistance to water and sulfur. It achieved over 70% NOx conversion at 150 °C, and maintained 100% at 200–350 °C. In the presence of SO2 and H2O, the NOx conversion was maintained at 87%. The spherical structure consisting of nanospikes provides the Mn-SNS catalysts with a large specific surface area, more (Mn4++Mn3+), abundant acid sites, and stronger reducibility, thus exhibiting excellent performance through the "fast-SCR" pathway. It also inhibits oxide crystallization and provides more sites for the adsorption activation of NOx and NH3. The nanowire structures can provide a large specific surface area and a high concentration of Mn3+ and Mn4+ for MnOx catalyst. Characterization analyses revealed that the specific surface area, the ratio of (Mn4++Mn3+)/Mn, and the number of Lewis acid sites (L-NH3) are the most important factors affecting the catalytic activity. This present empirical analysis provides new ideas for designing high-performance catalysts with a large specific surface area.

Ultrasensitive Ti3C2Tx@Pt-Based Immunochromatography with Catalytic Amplification and a Dual Signal for the Detection of Chloramphenicol in Animal-Derived Foods.

Herein, a catalytic amplification enhanced dual-signal immunochromatographic assay (ICA) based on Pt nanoparticles (Pt NPs) modified with Ti3C2Tx MXene (Ti3C2Tx@Pt) was first developed for chloramphenicol (CAP) in animal-derived foods. Due to the large specific surface area and abundant active sites of Ti3C2Tx@Pt, they can be loaded with hundreds of Pt NPs to enhance their catalytic activity, resulting in a significant increase in the detection sensitivity; the sensitivity was up to 50-fold more sensitive than the reported ICA for CAP. The LODs of the developed method for milk/chicken/fish were 0.01 μg/kg, the LOQs were 0.03 μg/kg and the recovery rates were 80.5-117.0%, 87.2-118.1% and 92.7-117.9%, with corresponding variations ranging from 3.1 to 9.6%, 6.0 to 12.7% and 6.0 to 13.6%, respectively. The linear range was 0.0125-1.0 μg/kg. The results of the LC-MS/MS confirmation test on 30 real samples had a good correlation with that of our established method (R2 > 0.98), indicating the practical reliability of the established method. The above results indicated that an ICA based on the Ti3C2Tx@Pt nanozyme has excellent potential as a food safety detection tool.

Efficient photocatalytic removal of ciprofloxacin through in-situ growth of g-C3N4 on the surface of clinoptilolite

Natural mineral clinoptilolite has many advantages such as porous structure, stability, low price, environmental protection, and simple modification process, making it an ideal choice for wastewater treatment materials. Loading photocatalysts on the surface of zeolite can effectively exert adsorption degradation synergy in wastewater treatment, improve pollutant removal and mineralization capabilities, and further reduce the harm of wastewater to the environment. In this work, g-C3N4 was in-situ grown on the surface of clinoptilolite using a one-step calcination method for efficient photocatalytic removal of the pollutant ciprofloxacin from water. In-situ growth of g-C3N4 on clinoptilolite enables the catalyst to have strong adsorption capacity for pollutants. At the same time, the large specific surface area and extended photo-generated carrier lifetime make the composite photocatalyst exhibit excellent visible light adsorption degradation ability. The CN/CLI-60 with the best photocatalytic performance showed a removal rate of over 90 % of ciprofloxacin within 60 min, much higher than pure g-C3N4 and clinoptilolite. In addition, the pH value, pollutant concentration, catalyst quantity, and cycle stability have all been investigated to evaluate the practical application potential of this catalyst. This work can provide industrial guidance for the rational design of low-cost and high-efficiency photocatalysts using natural clinoptilolite.

Spinel ferrites having conductive grains, resistive interfacial boundaries and relaxation mechanism for possible supercapacitor applications

Linear increase in crystallite size (16–24 nm) of MnxZn1−xFe2O4 nanostructures and mixed behavior of lattice constant (8.429–8.462 Å) is reported. The system exhibits considerable promise for microwave applications due to its elevated dielectric constants and minimal dispersion losses from 20 Hz to 20 MHz. With x = 0.75, sample is good for energy storage devices like supercapacitors due to large specific surface area (53 m2/g) and dielectric constant. These samples exhibit maximum relaxation times ranging from 1.97 × 10−7 s to 2.43 × 10−4 s, with corresponding relaxation energy values spanning from 159.22 meV to 341 meV for x = 0 and x = 1 samples. The Cole-Cole plots reveal that grains exhibit conductive behavior at lower frequencies, while grain boundaries contribute significantly to the resistive behavior. Additionally, we have introduced Bode diagrams and equivalent electronic circuit models for the first time, offering valuable insights into the electrical behavior of the nanomaterial samples.

Highly dispersed active sites and strong metal-support interaction for boosting CO2 hydrogenation to methanol

As global energy demand continues to increase and global climate change issues caused by greenhouse gas emissions gradually heat up, the effective conversion of carbon dioxide into high value-added methanol has become a key challenge in the energy and environmental fields. However, due to the chemical inertness of CO2 molecules, it is difficult to activate CO2 at low temperatures, resulting in extremely low conversion rates. Although increasing the reaction temperature is beneficial for the conversion of CO2, there is also competition in the reverse water gas reaction, resulting in lower methanol selectivity. Therefore, developing efficient catalysts is the key to improving CO2 conversion rate and methanol selectivity. In this work, we used zirconium-based UIO-66 metal-organic framework as a precursor, replaced the original terephthalic acid ligand with thermally unstable aminoterephthalic acid, and supported Cu on the MOF precursor by equal volume impregnation method. After heat treatment, the Cu/ZrO2-DM catalyst was prepared. The catalyst was compared with Cu/ZrO2 catalyst prepared by co-precipitation method, hydrothermal method and unmodified Cu/ZrO2-D catalyst. The Cu/ZrO2-DM catalyst exhibited the highest CO2 conversion and methanol selectivity in the hydrogenation reaction, reaching 13.95% and 90.78%, respectively. The main reason is attributed to the large specific surface area of the copper-based catalyst derived from MOF materials, the good dispersion of the active center and the strong interaction between Cu and the precursor. This work may provide a new perspective for the design and synthesis of related catalytic materials for efficient CO2 hydrogenation to methanol.

Highly sensitive methyl parathion electrochemical sensor designed from expired mung bean-derived porous carbon embellished with cerium oxide nanoparticles

Methyl parathion (MP) is one kind of highly toxic, efficient, and broad-spectrum organic phosphorus insecticides, which may prevent and control various pests on crops. However, the unscientific usage of MP has caused serious harm to humans and ecological environment. It is very necessary to design a sensitive and selective MP analysis method to ensure the food safety and life health. In this work, we reported a low-cost and environmental-friendly strategy to prepare the expired mung bean derived porous carbon (EMBPC) with interconnected carbon conductive network and large specific surface area, which was further decorated by cerium oxide (CeO2) nanoparticles. EMBPC possessed good conductivity property and electrochemical active area, which effectively boosted the charge transfer efficiency. CeO2 nanoparticles with good biocompatibility and high catalytic capacity promoted the efficient adsorption of MP on the surface of sensing electrode due to the affinity of CeO2 nanoparticles towards the phosphate groups of MP. Furthermore, EMBPC with porous carbon conductive structure could effectively make up for the inherent disadvantage of CeO2 nanoparticles in the term of electrical conductivity. The fabricated EMBPC@CeO2/GCE sensor showed highly sensitive MP detection property with low limit of detection (LOD) of 9.028 nM. The satisfactory repeatability, reproducibility, and anti-interference ability could be achieved at the fabricated MP electrochemical sensor. For the detection of MP in food samples, the EMBPC@CeO2/GCE sensor showed satisfactory recovery rates of 95.25–112.31 % and low RSD of 1.76–4.05 %, which suggested the good application prospect of the EMBPC@CeO2/GCE sensor.

Efficient Template-Catalyzed In Situ Polymerization for Carbon Xerogels with Large Specific Surface Area and High Adsorption.

The limited specific surface area (SSA), long preparation period, and high cost are significant challenges for carbon xerogels (CXs). To overcome these limitations, we propose an approach to prepare tannin-resorcinol-formaldehyde-based CXs through template-catalyzed in situ polymerization. ZnCl2 acts as a catalyst and significantly accelerates the polymerization reaction through the coordination of Zn2+ to the carbonyl group in formaldehyde, while atmospheric drying instead of special drying and without solvent exchange reduces the preparation period to 24 h. In addition, ZnCl2 acts as an activator for the formation of many pores. Plant-derived tannins not only reduce the preparation cost but also regulate the pore structure. The resulted CXs with hierarchical porous structures show an optimal SSA of 1308 m2/g, high adsorption capabilities (for cationic, nitrosoaniline dyes, metal, and nonmetallic ions, especially for methylene blue with 454.93 mg/g), low shrinkage down to 10%, and reusability with 92.9% retention after 5 cycles. This work provides a promising and cost-effective method for the large-scale preparation of porous carbon materials with large SSA, offering potential applications in adsorption, energy storage, and catalysis.

In situ exsolved NiFe nanoparticles in Ni-doped Sr0.9Ti0.3Fe0.63Ni0.07O3‑δ anode with a three-dimensionally ordered macroporous structure for solid oxide fuel cells fueled by alkanes

In this work, A-site deficient Ni-doped Sr0.9Ti0.3Fe0.63Ni0.07O3‑δ perovskite anode with ordered macroporous structures (STFN-3DOM) is designed to facilitate in-situ Ni-Fe exsolution for solid oxide fuel cells fueled by alkanes, e.g., methane and propane. The large specific surface area and A-site deficient of STFN-3DOM provide more exsolved Ni-Fe active sites and enhance the reaction kinetics of alkane reforming. Quasi-in-situ XPS is used to reveal the changes in the chemical state of elements during the exsolution and propane reforming process on the STFN-3DOM surface. The synergistic effect of A-site deficient, three-dimensional ordered macroporous structure, and in-situ Ni-Fe exsolution promotes the La0.8Sr0.2Ga0.83Mg0.17O3‑δ (LSGM) electrolyte-supported SOFC single cell to deliver advanced performance with both wet H2 (1.33 W cm−2) and wet C3H8 (0.838 W cm−2) at 850 °C, exhibiting satisfactory long-time stability in CH4 and redox stability. Density functional theory calculation confirms the low activation energy of STFN-3DOM for the rate-limiting step of C3H8* dissociation.

Design of mesoporous Carbon/SnO2 micro/nanostructured ethanol sensors

The low cost and convenient preparation of ZIF-8 derived mesoporous carbon polyhedrons (MPCPs) are introduced into SnO2 nanoparticles, and MPCPs/SnO2 composites with unique porous polyhedral micro/nanostructure are synthesized. The gas-sensitive investigations of the MPCPs/SnO2 sensor show that the sensitivity towards ethanol is significantly improved. The response of MPCPs/SnO2 sensor is approximately 79.5 towards 100 ppm ethanol at 160 °C, which is 3.5 times that of pure SnO2 sensor, and the response/recovery time are 17 s/38 s. In addition, the MPCPs/SnO2 sensor is significantly less cross-sensitive to other interfering gases. The enhancement of gas sensing performance is mainly attributed to the synergistic effect of high porosity, large specific surface area and abundant electrochemically active region of the MPCPs/SnO2 micro/nanostructure. Therefore, the synergy of the above factors provides the basis for improving the sensitivity and reducing the response/recovery time of the MPCPs/SnO2 sensor. The study provides technical guidance for designing ethanol sensors with higher sensitivity, shorter response/recovery time and lower cross-sensitivity.

Reconstructing Kaolinite Compounds for Remarkably Enhanced Adsorption of Congo Red.

Organic dyes are widely used in many important areas, but they also bring many issues for water pollution. To address the above issues, a reconstructed kaolinite hybrid compound (γ-AlOOH@A-Kaol) was obtained from raw kaolinite (Kaol) in this work. The product was then characterized by X-ray diffraction (XRD), Fourier-transform infrared (ATR-FTIR), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM), and the absorption properties of γ-AlOOH@A-Kaol for congo red were further studied. The results demonstrated that flower-like γ-AlOOH with nanolamellae were uniformly loaded on the surface of acid-treated Kaol with a porous structure (A-Kaol). In addition, the surface area (36.5 m2/g), pore volume (0.146 cm3/g), and pore size (13.0 nm) of γ-AlOOH@A-Kaol were different from those of A-Kaol (127.4 m2/g, 0.127 cm3/g, and 4.28 nm, respectively) and γ-AlOOH (34.1 m2/g, 0.315 cm3/g, and 21.5 nm, respectively). The unique structure could significantly enhance the sorption capacity for congo red, which could exceed 1000 mg/g. The reasons may be ascribed to the abundant groups of -OH, large specific surface area, and porous structure of γ-AlOOH@A-Kaol. This work provides an efficient route for comprehensive utilization and production of Kaol-based compound materials that could be used in the field of environmental conservation.

Mineral-derived layered carbon-based catalysts for enhanced Fenton-like reactions and catalytic ceramic membrane systems: Si-O coordination mediates radical generation and electron transfer

Taking advantage of the silica-rich layered structure of montmorillonite (MT), carbon-based catalysts are expected to efficiently activate peroxymonosulfate (PMS), avoiding the instability and metal leaching problems of metal catalysts. This study developed innovative metal-free catalysts (10 N/C@Si) with Si-O coordination derived from the naturally abundant MT, which was different from the conventional methods of using them as carriers or ion doping. The fabricated 10 N/C@Si catalysts with a large specific surface (368.7 m2/g) area exhibited a significant catalytic oxidation ability for tetracycline (kobs = 0.401 min -1). The degradation mechanism included enhanced radical and electron transfer. The Si-O coordination can lead to the cleavage of adsorbed PMS, accelerating the generation of radicals, and can also serve as a bridge for the transfer of electrons from tetracycline to the 10 N/C@Si/PMS complexes, as proved by density-functional theory (DFT) computations. Additionally, loading of 10 N/C@Si on ceramic membranes (CM) achieved an extraordinarily large water flux of 505.0 L·m−2·h−1 and showed full oxidation of tetracycline, which simultaneously allowed efficient in-situ degradation and one-step solid–liquid separation.

Cu-BTC Derived Mesoporous CuS Nanomaterial as Nanozyme for Colorimetric Detection of Glutathione.

In this paper, Cu-BTC derived mesoporous CuS nanomaterial (m-CuS) was synthesized via a two-step process involving carbonization and sulfidation of Cu-BTC for colorimetric glutathione detection. The Cu-BTC was constructed by 1,3,5-benzenetri-carboxylic acid (H3BTC) and Cu2+ ions. The obtained m-CuS showed a large specific surface area (55.751 m2/g), pore volume (0.153 cm3/g), and pore diameter (15.380 nm). In addition, the synthesized m-CuS exhibited high peroxidase-like activity and could catalyze oxidation of the colorless substrate 3,3',5,5'-tetramethylbenzidine to a blue product. Peroxidase-like activity mechanism studies using terephthalic acid as a fluorescent probe proved that m-CuS assists H2O2 decomposition to reactive oxygen species, which are responsible for TMB oxidation. However, the catalytic activity of m-CuS for the oxidation of TMB by H2O2 could be potently inhibited in the presence of glutathione. Based on this phenomenon, the colorimetric detection of glutathione was demonstrated with good selectivity and high sensitivity. The linear range was 1-20 μM and 20-300 μM with a detection limit of 0.1 μM. The m-CuS showing good stability and robust peroxidase catalytic activity was applied for the detection of glutathione in human urine samples.