Large Plants Research Articles

First Report of Paprika mild mottle virus Infecting pepper (Capsicum annuum L.) in China.

Paprika mild mottle virus (PaMMV), a tobamovirus from the Virgaviridae family, has been reported to infect pepper (Capsicum annuum L.) in the Netherlands (García-Luque et al., 1993), Japan (Hamada et al., 2003), Bulgaria (Ruíz del Pino et al., 2003), and Israel (Luria et al., 2018). Pepper has become the most widely planted vegetable and the most heavily consumed spicy condiment, with a large planting area (>21,000 km2) in China (Zou et al., 2021). However, the crop's productivity is limited by viral diseases. In August 2021, a survey of viral diseases was conducted across five pepper-growing regions in Linyi, Shandong Province, China, revealed that 5% to 10% of plants in most fields exhibited symptoms such as stunting, leaf narrowing, chlorosis, and crinkling of leaf tissue (Fig. S1-a). Subsequently, seven symptomatic samples (Fig. S1-b) were collected from a plot (118° 29' E, 34° 65' N) where thin-skinned peppers were grown. All samples tested positive in a Western blot assay using a polyclonal antibody for tobacco mosaic virus (TMV), indicating the presence of a tobamovirus (Fig. S1-c). To identify the virus, total RNAs were extracted from 10 different symptomatic pepper plant samples, using the RNeasy Plant Mini Kit (QIAGEN, Hilden, Germany) and combined into a single sample in equal amounts (100 ng/μL each). RNA-Seq was performed on this mixture using the Illumina NovaSeq 6000 (Illumina, San Diego, USA). Raw reads (6.92G) in fastq format were processed with in-house perl scripts to yield clean reads (6.68G), which were assembled into 780 contigs (mean length: 2036 bp) using Trinity software (v2.6.6). These contigs were then analysed using the NCBI BLASTX program (http://www.ncbi.nlm.nih.gov/blast) against the viral RefSeq database. The results demonstrated that the contigs exhibited an average genome coverage of 40.16%. Notably, one unique contig (6453 bp) was mapped to the PaMMV genome (reference sequence KX187305.1) with 98.34% identity. To verify the RNA-Seq result, a PaMMV-specific primer pair (forward: 5'-GAGTTCATAGAGGCAGTACC-3'; reverse: 5'-CTTCGATTTAAGTGGAGGGAT-3') was designed for amplifying an 800-nt fragment of the PaMMV coat protein (CP) gene by RT-PCR. The 800-nt fragment was successfully amplified from all the symptomatic samples (Fig. S1-d). Sequenced RT-PCR products (GenBank No. OR365081.1) showed 99.75% nucleotide identity with PaMMV isolates (OQ198318.1, China, goat) according to BLAST analysis. Mechanical transmission of PaMMV from three infected pepper plants collected in Linyi to healthy pepper plants confirmed pathogenicity. Three pepper cultivars (trade name: Qiemen, Tianyu, Haonong11) were tested and showed varying symptoms post-inoculation (Fig. S1-e). All cultivars were confirmed in the lab to be PMMoV-sensitive and exhibited significant viral disease symptoms after PMMoV inoculation (data not shown). Each variety was inoculated with at least 3 seedlings from different field-collected virulence sources. Qiemen (cultivar: sweet pepper) exhibited severe symptoms with necrotic spots, Tianyu (cultivar: Chaotian pepper) had mild leaf wrinkling, and Haonong11 (cultivar: Pickled pepper) showed yellow mottle and leaf shrinking. All tested seedlings were positive for PaMMV by RT-PCR (Fig. S1-f). To our knowledge, this is the first report of PaMMV infecting pepper in China, highlighting the need for vigilant monitoring to protect the chili industry and prevent the virus's spread to other crops.

Ocean oxygenation and ecological restructuring caused by the late Paleozoic evolution of land plants

The dramatic increase in ocean-atmosphere oxygen levels during the Devonian and Mississippian is increasingly linked to the diversification of land plants, yet the timing and extent of this event remain uncertain. This study uses the redox-sensitive rare earth element cerium (cerium anomaly—Ce/Ce*) to investigate ocean redox conditions during the deposition of globally distributed Paleozoic carbonate strata. Our Paleozoic Ce/Ce* record suggests that Cambrian, Ordovician, and Silurian oceans had relatively low O2 levels (mean Ce/Ce* = 0.86 ± 0.10, 0.91 ± 0.14, and 0.91 ± 0.10 [±1σ], respectively). In contrast, short-lived ocean oxygenation events, possibly related to the diversification of small land plants, likely occurred throughout the Early and Middle Devonian (mean Ce/Ce* = 0.80 ± 0.07 and 0.58 ± 0.14, respectively). “Modern” Ce/Ce* values (<0.36) first occurred during the Late Devonian, suggesting that the main phase of Devonian and Mississippian oceanic oxygenation was related to the evolution of large vascular plants and the first forests. Despite this, the significant variability of Ce/Ce* values during this time suggests that shallow marine settings were susceptible to redox instability, possibly caused by upwelling of anoxic deep waters. This redox instability potentially provides evidence of a mechanism for contemporaneous mass extinction and metazoan reef collapse events. Development of strongly oxic conditions during the Late Devonian may have resulted in the demise of many Paleozoic-type organisms, facilitated the radiation of the modern evolutionary fauna, and established the modern oxygenated ocean-atmosphere system.

Industrial plant noise mitigation starting from the plant first runs

The article summarizes a noise impact mitigation study that was carried out in the Liguria region in Northern Italy, between July 2020 and March 2022 on a large industrial plant that produces zinc oxide. The authors were summoned at the plant first run tests, so this study started without a participation in the industry planning and design phases. We followed the main machine installations and perfected the mitigation project accordingly: priorities were updated after each assessment and new modelization. This approach was carried out with different SPL measurement campaigns and the use of sound-intensimetry and a beam-forming SEVENBEL antenna. A SoundPLAN 3d model was updated step by step, defining a designing ad hoc noise control strategies and solutions, in order to respect the Italian administrative noise regulations. The mitigation works were directed by one of the authors and included different approaches: such as some large cylindrical silencers on the smoke stacks, sound barriers and insulating coatings, as well as fan velocity optimization.

Origin of land status and history of land use of large oil palm plantation in PT PSM, West Kalimantan Province

Origin of land status and history of land use of large oil palm plantation in PT PSM, West Kalimantan Province

Origin of land status and the history of land use of large oil palm plantations in South Sumatra Province (a case study in the plantation of PT TPR and PT RAJ)

Origin of land status and the history of land use of large oil palm plantations in South Sumatra Province (a case study in the plantation of PT TPR and PT RAJ)

Geothermal Power, and a Battery as Well

One of geothermal energy’s key advantages is that it’s always on. But making money selling power increasingly requires being able to react to shifts in electric prices by adjusting production up and down. The fact this is a concern now is an indication of the ambition of a new generation of companies that have shown it is possible to use horizontal drilling and fracturing to build subsurface heat exchangers to harvest large amounts of geothermal energy. The geologic potential is huge—there are a lot of places with hot rock at a drillable depth. But monetizing that potential will require grabbing a sizeable share of the market in big states such as California and Texas where the price of electricity can sink toward zero when sunny conditions allow maximum solar power production, and then rebound as the sun sets. This is a pressing concern for Houston-based Fervo Energy because it is one of the first firms in a small pack of innovators to reach the point where it is building a large scale power plant using this emerging technology. Unlike wind and solar, it can deliver power on demand, similar to coal, gas, and nuclear-powered plants that supply baseload power to the electric market. Fervo’s founders play up its ability to deliver power on demand, but they resist the label baseload power provider because, as Jack Norbeck, chief technology officer and cofounder of Fervo, said, “In the future, baseload power will be a thing of the past.” Baseload power plants are not yet an endangered species. There are still large, mostly old fossil-fueled plants providing baseload power that are still around because they were paid for long ago. However, their numbers are declining as they wear out and are hit with demands for costly emission reductions. The initial sales by Fervo’s Cape Station project in Utah will provide baseload power to southern California power suppliers, complying with a unique California rule that requires them to source low-carbon power supplies that are available 24/7. But for new geothermal companies to sell enough power to become significant players in US power markets, they will need to provide what the electricity business describes as “more flexible, dispatchable power.” Big baseload plants ruled the power universe back when regulators set rates high enough to maintain a sizable surplus of generating capacity—ensuring the lights stayed on. Now, in markets such as Texas and California, power pricing rises and falls based on supply and demand, with selling at all times sometimes resulting in very low payments during peak production periods for solar and wind. This is particularly true during seasons where days tend to be sunny and windy with moderate temperatures. “If you are consuming electricity, particularly in the spring and fall, it is an extremely clean grid you are pulling from,” said Christian Gradl, vice president of operations for Fervo during a panel at this year’s Offshore Technology Conference.

Annual relative performance degradation in photovoltaic solar plants

This study aims to assess annual relative performance degradation σ to be used in the computations of the Levelised Cost of Energy (LCOE) of new plants based on the standard year for weather and solar resource. The assessment is based on the experimental data of power generation, weather, and resource for different years, and simulations of power generation by using the National Renewable Energy Laboratory (NREL) System Advisor Model (SAM) software. The raw data of power generation for 53 different plants spanning about one decade show a σ assessed at less than 0.29%. This makes it reasonable to assume in SAM σ=0% to σ=0.29%. This is less than the default σ=0.5% currently used in SAM based on limited outdated data. The updated performance degradation factor diminished to σ=0-0.29% reduces the computed LCOE for typical new projects in the United States from 2.86 to 2.74-2.80 ¢/kWh. Correction of the σ trends for interannual variability of weather and resource is unnecessary, providing enough years of operation are covered, given the inaccuracies in the model and the supporting data, the mitigation by management of the performance changes, and the complex phenomena correlated to the change of weather and irradiance affecting the power output in different directions. The reduced σ is the result of a significant product improvement over the last decades, especially for large power plants, compared to the plant which provided data for the prior correlation of performance degradation, and much better management and maintenance of the plants.

Dioxin concentrations and congener distribution in biomass ash from small to large scale biomass combustion plants.

Biomass plays a pivotal role in global energy production, with a significant share allocated for industrial heat and power generation. The combustion of biomass generates biomass ash, which is widely utilized as a fertiliser. However, concerns arise regarding the presence of dioxins in biomass ash, which may limit its continued use. Dioxins are toxic compounds listed under the Stockholm Convention due to their persistence and detrimental effects on human health and the environment. This study investigates the dioxin content in biomass ashes produced in various combustion plants with a capacity of 1-50MWth in Estonia, where biomass is widely used for heating and power production. The research encompassed samples from nine biomass combustion plants with varying technical parameters considering both bottom and fly ash. Dioxin concentrations were determined for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like PCBs (PCBs). The results indicate that dioxin TEQ content in all samples was well below the European Union's (EU) POP Regulation limit of 5µg TEQ/kg, with most values being at least tenfold lower. However, some samples failed to meet the EU Fertilising Products Regulation's threshold of 20ng TEQ/kg. Notably, fly ash exhibited higher dioxin concentrations than bottom ash. While PCBs were in significant concentrations, PCDDs dominated the overall dioxin TEQ content. This study provides essential insights into the dioxin content in biomass ash and its correlation with current EU regulatory limits. It also highlights the complex distribution of dioxin congeners, particularly PCBs, within biomass ash, emphasizing the continued research's importance.

Nutraceutical and Functional Food Potentials of African Black Elimi (Canarium schweinfurthii): A Review

Study’s Excerpt The potentials of Canarium schweinfurthii in traditional African medicine in treating various ailments due to its rich bioactive composition is extensively explored. 80 publications were synthesized to gather the plant’s diverse nutraceutical and functional properties. The plant has antimalarial, anti-cancer, and antioxidant effects, among others. Full Abstract Medicinal plants have been central to African traditional medicine for centuries, preceding the development of synthetic drugs. Africa is blessed with large medicinal plants that are either under-explored or yet to be studied. This study aimed to find relevant research works on Canarium schweinfurthii with the purpose of identifying a new research niche. One hundred eighteen (118) research journals were collected, and 80 publications were synthesized and used to identify non-repeated experiments on the functional and nutraceutical potentials of Canarium schweinfurthii. The results of the review revealed that different parts of the plant including leaves, stem bark, roots, fruits, seeds, flowers, gum, and resin were traditionally employed in treating a range of ailments, including diabetes, stomach ulcers, malaria, typhoid, leprosy, reproductive disorders, and fever which are attributed to plant’s richness for nutraceutical and functional properties, driven by the presence of bioactive compounds such as antioxidants, alkaloids, saponins, flavonoids, tannins, glycosides, and phenolic compounds. Nutraceutical and functional investigations of the plant have corroborated the antimalarial, anti-cancer, anti-diabetic, analgesic, antioxidant, antimicrobial, anti-bacterial, growth-promoting, nephroprotective, food preservative, anthelmintic, and termiticidal properties of the fruit pulp, fruit bark, stem bark, fruit oil, seed oil of Canarium schweinfurthii. This review recommends the plant for proper establishment of a foundation for the plant’s pharmaceutical application and underscores the need for further research.

Techno-Economic Analysis of the Solid Oxide Semi-Closed CO2 Cycle for Different Plant Sizes

Abstract This work presents a detailed techno-economic evaluation of the SOS-CO2 cycle, a hybrid semi-closed cycle with solid oxide fuel cells developed by Politecnico di Milano. for different plant sizes, ranging from large utility plants (400 MWel) to industrial applications (50 MWel). The analysis includes the design and sizing of all the cycle components, including specific design optimization models for the most critical cycle components such as the regenerative heat exchanger and the turbine. Results are compared with the performance of the Allam cycle, an oxy-combustion cycle with higher technology readiness level. The results show that the SOS-CO2 cycle maintains high efficiency over the whole size range thanks to the modularity of the fuel cell and the regenerator which counterbalances the decrease in turbomachine efficiency at small sizes. For the utility scale plant, despite its higher specific investment cost (3761 €/kW vs. 2490€/kW), the SOS-CO2 cycle appears to be competitive with the Allam cycle in terms of cost of electricity (128.4 €/MWh and 127.8 €/MWh of the Allam cycle) thanks to its higher efficiency (68.9% vs. 53.1%). At smaller sizes, the higher efficiency and the lower dependance on the economies of scale make the SOS-CO2 more economically advantageous: for the 50 MWel plant, the cost of electricity of the SOS-CO2 is 175.8 €/MWh vs. 205.8 €/MWh of the Allam cycle.

People, Palms, and Productivity: Testing Better Management Practices in Indonesian Smallholder Oil Palm Plantations

More than 40% of the total oil palm area in Indonesia is owned and managed by smallholders. For large plantations, guidelines are available on so-called ‘best management practices’, which should give superior yields at acceptable costs when followed carefully. We tested a subset of such practices in a sample of smallholder plantations, aiming to increase yields and profitability. We implemented improved practices (weeding, pruning, harvesting, and fertiliser application) in 14 smallholder plantations of 13–15 years after planting in Jambi province (Sumatra) and in West-Kalimantan province (Kalimantan) for a duration of 3 to 3.5 years. During this period, we recorded yields, measured palm leaf parameters and analysed leaf nutrient contents. Yield recording then continued for an additional two years. In the treatment plots, the yields did not increase significantly, but the size of the bunches and the size of the palm leaves increased significantly and substantially. The tissue nutrient concentrations also increased significantly, although after three years, the potassium concentrations in the rachis were still below the critical value. Because of the absence of yield increase and the additional costs for fertiliser inputs, the net profit of implementing better management practices was negative, and ‘business as usual’ was justified financially. Some practices, such as harvesting at 10-day intervals and the weeding of circles and paths, were received positively by those farmers who could implement them autonomously, and were applied beyond the experiment. It is challenging to find and implement intensification options that are both sustainable and profitable, that have a substantial impact on yield, and that fit in the smallholders’ realities. On-farm experimentation and data collection are essential for achieving sustainable intensification in smallholder oil palm plantations.

Direct quenching and tempering to achieve high strength and toughness of GPa-Grade nano-precipitated steel: The effect of precipitation behavior and variant selectivity

In order to satisfy the application requirements for strength and toughness of hydropower steels for large pumped storage power plants. In this study, based on the synergy of deformation and phase transition, the trade-off between strength and toughness was broken, and the GPa-grade nano-precipitated steel was prepared by direct quenching and tempering. The effects of Nb–V–Ti composite nano-precipitation behavior and martensite variant selectivity on the strengthening and toughening mechanisms were highlighted. The results show that directly quenched steel has the optimal comprehensive mechanical properties after tempering at 550 °C. Combining the contributions of various strengthening mechanisms, the increase in the yield strength relative to off-line quenching and tempering is mainly attributed to additional dislocation strengthening (∼33 MPa) and precipitation strengthening (∼174 MPa). Direct quenching enhances the homogeneous nucleation of finer mono- and binary precipitates and their stable growth during tempering, while the ternary precipitates do not suffer from elemental inhomogeneities due to lack of re-dissolution. Furthermore, the high-frequency variants of the dominant close-packed plane group tend to form high-angle grain boundaries with different orientations and planar alignments, derived from the refinement of Bain groups induced by the self-plasticity modulation of martensite transition due to the accumulation of deformed geometrically necessary dislocations and finite dislocation slip.

Methodological proposal to approximate the sectoral impacts of a carbon tax at the regional level – the case of Chile

This study proposes a methodological approach to approximate the sectoral impacts of carbon taxes in the different regions of Chile through the environmental extension of intraregional input – output models. These models are calibrated by regionalizing technical coefficients using an indirect method called Industry-Specific Flegg Location Quotient. Carbon dioxide emissions at the regional and sectoral levels are obtained mainly from regional inventories of greenhouse gases, although in some sectors, they are calculated indirectly from fuel consumption. Then, tax scenarios are proposed that allow simulation of the effects on sectoral prices, levels of production, and emissions at the regional level. The results show that implementing an identical tax rate at the national level has a very heterogeneous impact on the country’s regions, with the regions of Atacama, Antofagasta, Valparaíso, and Biobío being the most affected economies in relative terms since most of the large thermoelectric power plants are located there.

Solutions for the Implementation of Algorithms for Closed-Loop Control of the Frequency and Power of Large Power Plant Units Comprising Once-Through Boilers

Solutions for the Implementation of Algorithms for Closed-Loop Control of the Frequency and Power of Large Power Plant Units Comprising Once-Through Boilers

Pollinators respond positively to urban green space enhancements using wild and ornamental flowers

Abstract Pollinator diversity and abundance are under direct threat from human activities. Despite societal dependence on pollinators for crop production, humankind continues to drive pollinator declines through agricultural intensification and urbanisation. Urban environments can provide refuge to some pollinators. There is a need, however, to understand how pollinator communities can be supported in these areas while also considering human needs. Public green spaces provide a promising avenue to target plant–pollinator conservation measures in an urban setting due to their large area, high abundance and low plant–pollinator biodiversity. We used a paired design to compare the plant community, pollinator community and plant–pollinator interactions of (i) public urban green spaces enhanced with wildflower meadows and pollinator‐friendly ornamental plantings to (ii) control unenhanced urban green spaces. The planting types within enhanced sites were also separately compared. Our results show that not only was the diversity of the overall pollinator community higher in enhanced than control sites, but also the complexity of some wild Hymenoptera and the abundance of Diptera pollinator groups. The negative impact of urbanisation on some pollinator groups was reduced in enhanced sites compared with control sites. Planting both pollinator‐friendly ornamental plants and wildflower meadows significantly increased the visits from Diptera and the diversity in the plant–pollinator community compared with wildflower plantings alone. Our results suggest that enhancing public spaces for pollinators has positive effects on key groups and can help mitigate the impacts of urbanisation. Non‐native ornamental plants can also play a role in enhancing green spaces for pollinators while maintaining their recreational functions. This supports a mixed‐planting approach for improving public green spaces in urban areas for both people and nature.

Investigation of sustainable operation oriented- economic, process and environment based multi-criteria optimization of large scale methanol production plant

Methanol is one of the main raw materials and a building block for many essential chemicals in the industry, and it is widely produced from the synthesis gas. It is used as a fuel, solvent, inhibitor, antifreeze agent, and in producing a variety of chemicals including olefins and paraffin. The global demand for methanol is 70 million tons per year and it is estimated to grow by a factor of 6–8% per year so it is necessary to develop a methanol production process, which is economical, and environment friendly. The multi-objective optimization (MOO) approach is used to optimize the large scale Lurgi two-step methanol synthesis process using the non-dominated sorting genetic algorithm-II (NSGA-II) to find the Pareto front solutions involving the process, economic, and environmental-based objectives. Methanol production rate, total energy consumption, total annual CO2 emissions, and profit are considered as objectives. The five decision variables include syngas molar flow, reactor feed pressure, reactor 1 temperature, reactor 2 temperature, and by-product mass flow in the methanol distillation column. Two constraints are set on ethanol mole fraction in the methanol stream, and methanol mole flow in water to the treatment stream. Three optimization cases (two bi-objective and one tri-objective) are developed. In the Case 1 study, CO2 emissions decreased by 65.83%, the methanol production rate increased by 10.11%, and total energy was reduced by 57.55%. The Pareto ranking is carried out using the Preference Ranking On the Basis of Ideal-average Distance (PROBID) method and the best optimal solution is reported for all cases.

Design Optimization of a Run-Of-River Small Hydropower Plant: A Case Study of Mabula Kapi Site

Prior to construction, small or large hydropower plants undergo feasibility studies, which involve technical, economic, financial, social, and environmental aspects. Technical studies, particularly, include various engineering disciplines. This study sought to conduct a component of technical feasibility studies, focused on design optimization of the turbine-plant capacity size for a run-of-river case study called Mabula Kapi, on Kaombe River, Serenje, Zambia. The study method used computational modelling, simulation, and optimization techniques, and used secondary data from previous site. A prefeasibility study conducted earlier had underestimated the turbine-plant capacity owing to underestimated discharge data, owing to lack of site gauging station. A less accurate discharge estimation method involving transposition from a gauged similar catchment had been used. A later feasibility-level site hydrological study found improved discharge data. Riding on the improved discharge data, this study found the following optimised plant design parameters based on plant design discharge of 6.20 m3/s: Installed capacity of 10.20 MW; Annual energy production of 42 GWh; Capacity factor of 47.1%; 3 x Pelton wheel of 272 rpm speed, 2.1 m diameter, 2-nozzles of diameter 0.16 m each, 21 buckets of 0.58m width each; and 3 x 4 MVA generators of 50Hz, 22-poles, and 11kV.

Conceptual Scenarios of Architectural Adaptation of Novosibirsk Power Plant

This year marks the 100th anniversary of the foundation of the First Large Power Plant in Novosibirsk, a significant industrial building. Today, Novosibirsk is facing the problem of losing its integral cultural and historical environment due to the large number of unused dilapidated historical and architectural monuments. In order to prevent this trend and save the architectural heritage, it is necessary to develop modern strategies for reuse of these buildings.In this study, conceptual scenarios of architectural adaptation of M. I. Kalinin power plant, the object of cultural heritage of regional significance, are put forward through the methods of contextual, retrospective, ideographic analysis. These design solutions are classified by the original image of the building, focused on the transformation of the former industrial building in order to reveal the socio-historical side of the power plant as a symbol of the dynamic rise of the economy and energy industry in Novosibirsk.As a result, among the scenarios developed for the main building of the city's first major power plant, the most appropriate one is chosen in the context of the historical development of Novosibirsk.The conceptual principle of Nuanced combination with the historical context is the most effective among the described scenarios, assuming preservation of the general architectural image of the historical monument with reversible changes in the architectural solutions of the building.

Influence of thinning on carbon storage mediated by soil physicochemical properties and microbial community composition in large Chinese fir timber plantation

BackgroundThinning practices are useful measures in forest management and play an essential role in maintaining ecological stability. However, the effects of thinning on the soil properties and microbial community in large Chinese fir timber plantations remain unknown. The purpose of this study was to investigate the changes in soil physicochemical properties and microbial community composition in topsoil (0–20 cm) under six different intensities (i.e., 300 (R300), 450 (R450), 600 (R600), 750 (R750) and 900 (R900) trees per hectare and 1650 (R1650) as a control) in a large Chinese fir timber plantation.ResultsCompared with the CK treatment, thinning significantly altered the contents of soil organic carbon (SOC) and its fractions but not in a linear fashion; these indicators were highest in R900. In addition, thinning did not significantly affect the soil microbial community diversity indices but significantly affected the relative abundance of the core microbial community. Proteobacteria, Acidobacteria, and Actinobacteria were the dominant bacterial phyla; the relative abundances of Proteobacteria and Acidobacteria were highest in R900, and that of Actinobacteria was lowest in R900. The dominant fungal phyla were Ascomycota, Basidiomycota and Mucoromycota; the relative abundance of Ascomycota was lowest in R900, and that of Mucoromycota was highest in R900. The fungal microbial community composition was more sensitive than the bacterial community composition. The activity of the carbon-cycling genes was not linearly correlated with thinning, and the abundance of C-cycle genes was highest in R900.ConclusionsThese findings are important because they show that SOC and its fractions and the abundance of the soil microorganism community in large Chinese fir timber plantations can be significantly altered by thinning, thus affecting the capacity for carbon storage. These results may advance our understanding of how the density of large timber plantations could be modified to promote soil carbon storage.

RCPI controller-based multilevel multistring grid following inverter for large rooftop PV power plant application

RCPI controller-based multilevel multistring grid following inverter for large rooftop PV power plant application