Large Density Research Articles

Does collagen cross linking have any effect on retinal circulation in patients with keratoconus? An optical coherence tomography angiography (OCTA) study

BackgroundWe aimed to employ Optical Coherence Tomography Angiography (OCTA) to comprehensively assess changes in the optic nerve head (ONH) and macular perfusion before and after the Corneal Collagen Cross-Linking (CCL) procedure in patients with keratoconus.MethodsA total of 22 keratoconus patient’s candidate for CCL procedures were included based on specific criteria, with meticulous exclusion criteria in place to minimize potential confounders. Participants underwent OCTA assessments of the ONH and macula using the Spectralis OCT (Heidelberg) before CCL, as well as at 1- and 3-months post-CCL. MATLAB software was utilized for image analysis.ResultsThe mean age of the participants was 20.09 ± 6.11, including 59% male, and the mean intraocular pressure (IOP) before the surgery was 13.59 ± 2.85 mmHg. Peripapillary Retinal nerve fiber layer (ppRNFL) thickness and overall retinal thickness remained stable post-CCL. However, significant alterations were observed in macular vessel density, emphasizing regional variations in vascular response. For macular large vessel density (LVD), both superficial and deep vascular complex (SVC and DVC) demonstrated significant differences between before surgery and the 3 months post-surgery follow-up (p < 0.001 and p = 0.002, respectively). Optic nerve head markers demonstrated relative stability, except for changes in avascular complex density, which was 49.2 ± 2.2% before the surgery and decrease to 47.6 ± 1.7% three months after the operation (P-value = 0.005).ConclusionWhile CCL appears to maintain the integrity of certain ocular structures, alterations in macular perfusion post-CCL suggest potential effects on retinal blood supply. Long-term monitoring is crucial to understand the implications of these changes, particularly in the context of conditions such as diabetes.

Mild-Temperature Supercritical Water Confined in Hydrophobic Metal-Organic Frameworks.

Fluids under extreme confinement show characteristics significantly different from those of their bulk counterpart. This work focuses on water confined within the complex cavities of highly hydrophobic metal-organic frameworks (MOFs) at high pressures. A combination of high-pressure intrusion-extrusion experiments with molecular dynamic simulations and synchrotron data reveals that supercritical transition for MOF-confined water takes place at a much lower temperature than in bulk water, ∼250 K below the reference values. This large shifting of the critical temperature (Tc) is attributed to the very large density of confined water vapor in the peculiar geometry and chemistry of the cavities of Cu2tebpz (tebpz = 3,3',5,5'-tetraethyl-4,4'-bipyrazolate) hydrophobic MOF. This is the first time the shift of Tc is investigated for water confined within highly hydrophobic nanoporous materials, which explains why such a large reduction of the critical temperature was never reported before, neither experimentally nor computationally.

Flexible Aluminum-Air Battery Based on High-Performance Three-Dimensional Dual-Network PVA/KC/KOH Composite Gel Polymer Electrolyte.

With a large theoretical capacity and high energy density, aluminum-air batteries are a promising energy storage device. However, the rigid structure and liquid electrolyte of a traditional aluminum-air battery limit its application potential in the field of flexible electronics, and the irreversible corrosion of its anode greatly reduces the battery life. To solve the above problems, a PVA/KC/KOH (2 M) composite gel polymer electrolyte (GPE) with a three-dimensional dual-network structure consisting of polyvinyl alcohol (PVA), kappa-carrageenan (KC), and potassium hydroxide was prepared in this paper by a simple two-step method and applied in aluminum-air batteries. At room temperature, the ionic conductivity of the PVA/KC/KOH (2 M) composite GPE was found to be up to 6.50 × 10-3 S cm-1. By utilizing this composite GPE, a single flexible aluminum-air battery was assembled and achieved a maximum discharge voltage of 1.2 V at 5 mA cm-2, with discharge time exceeding 3 h. Moreover, the single flexible aluminum-air battery maintains good electrochemical performance under various deformation modes, and the output voltage of the battery remains at about 99% after 300 cycles. The construction of flexible aluminum-air batteries based on a three-dimensional dual-network PVA/KC/KOH composite GPE provides excellent safety and high-multiplication capabilities for aluminum-air batteries, making them potential candidates for various flexible device applications.

Giant enhancement of vacuum friction in spinning YIG nanospheres

Experimental observations of vacuum radiation and vacuum frictional torque are challenging due to their vanishingly small effects in practical systems. For example, a nanosphere rotating at 1GHz in free space slows down due to friction from vacuum fluctuations with a stopping time around the age of the Universe. Here, we show that a spinning yttrium iron garnet (YIG) nanosphere near aluminum or YIG slabs generates vacuum radiation with radiation power eight orders of magnitude larger than other metallic or dielectric spinning nanospheres. We achieve this giant enhancement by exploiting the large near-field magnetic local density of states in YIG systems, which occurs in the low-frequency GHz regime comparable to the rotation frequency. Furthermore, we propose a realistic experimental setup for observing the effects of this large vacuum radiation and frictional torque under experimentally accessible conditions.

Ultra-High Performance of In Situ Constructed Trimetallic (Pd, Fe, Co) Nanoparticles on Carbon Paper as an Electrocatalyst for Large Current Density Oxygen Evolution Reaction in Alkaline Seawater

Seawater electrocatalysis holds significant promise as a technology for hydrogen production. A simple and low-cost impregnation-hydrothermal and thermal reduction strategy was used to synthesize in situ constructed three-dimensional porous trimetallic (Pd, Fe, and Co) anchored on a cheap and high-conducting carbon paper (CP) electrode for water electrolysis in alkaline media. The fabricated PdFeCo1−xONPs@CP electrode had super-hydrophilic and superaerophobic properties, allowing for the efficient removal of oxygen bubbles from the electrode surface due to the close interaction between the electrode and electrolyte. Furthermore, the synergistic effect of trimetallics and CP-fibers significantly increased OER intrinsic activity. PdFeCo1−xONPs@CP catalyst demonstrated critical low overpotentials of 220 and 300 mV, resulting in an extraordinarily high current density of 100 mA cm−2. For the full cell overall water splitting performance, cell overpotentials as low as 140 and 151 mV were needed to drive 10 mA cm−2 in seawater and alkaline solution electrolytes.

Constraints on non-Gaussian primordial curvature perturbation from the LIGO-Virgo-KAGRA third observing run

The scalar-induced gravitational wave (SIGWs), arising from large amplitude primordial density fluctuations, provide a unique observational test for directly probing the epoch of inflation. In this work, we provide constraints on the SIGW background by taking into account the non-Gaussianity in the primordial density fluctuations, using the first three observing runs (O1-O3) data of the LIGO-Virgo-KAGRA collaboration. We find that the non-Gaussianity gives a non-negligible effect on the GW energy density spectrum and starts to affect the analysis of the O1-O3 data when the non-Gaussianity parameter is F NL > 3.55. Furthermore, the constraints exhibit asymptotic behavior given by F NL Ag = const. at large F NL limit, where Ag denotes the amplitude of the curvature perturbations. In the limit of large F NL, we placed a 95% credible level upper limit F NL Ag ≤ 0.115, 0.106, 0.112 at fixed scales of 1016, 1016.5, 1017 Mpc-1, respectively.

Light competition drives species replacement during secondary tropical forest succession

Light competition is thought to drive successional shifts in species dominance in closed vegetations, but few studies have assessed this for species-rich and vertically structured tropical forests. We analyzed how light competition drives species replacement during succession, and how cross-species variation in light competition strategies is determined by underlying species traits. To do so, we used chronosequence approach in which we compared 14 Mexican tropical secondary rainforest stands that differ in age (8–32 year-old). For each tree, height and stem diameter were monitored for 2 years to calculate relative biomass growth rate (RGR, the aboveground biomass gain per unit aboveground tree biomass per year). For each stand, 3D light profiles were measured to estimate individuals’ light interception to calculate light interception efficiency (LIE, intercepted light per unit biomass per year) and light use efficiency (LUE, biomass growth per intercepted light). Throughout succession, species with higher RGR attained higher changes in species dominance and thus increased their dominance over time. Both light competition strategies (LIE and LUE) increased RGR. In early succession, a high LIE and its associated traits (large crown leaf mass and low wood density) are more important for RGR. During succession, forest structure builds up, leading to lower understory light levels. In later succession, a high LUE and its associated traits (high wood density and leaf mass per area) become more important for RGR. Therefore, successional changes in relative importance of light competition strategies drive shifts in species dominance during tropical rainforest succession.

Large Capacity and High Energy Density Technology for Batteries and Fuel Cells

Large Capacity and High Energy Density Technology for Batteries and Fuel Cells

Synthesis of 2D yttrium zinc oxide nanosheets via simple chemical route toward high performance Schottky diode based on large charge carriers density and photoresponsivity

Yttrium zinc oxide (Zn0.85Y0.15O) nanostructures were stoichiometrically prepared by co-precipitation method. XRD, EDX, XPS, SEM, and TEM spectroscopy were examined to investigate structure, composition, and morphological characteristics. The synthesized nanocomposite exhibited polycrystalline structure with small crystallite size ∼ 27 nm in which the particles appeared in sheets like shape with high atomic density on surface. The optical parameters including energy gap (Eg) and refractive index (n) were investigated from (T%) and (R%) measurements through wavelength range from 300–900 nm. Al/Y:ZnO/p-Si/Ag Schottky diode was fabricated using thermal evaporating technique and its current–voltage (I–V) was analyzed using different models. The photodiode showed non-ideal behavior with ideality factor greater than unity and small potential barrier. Under various illuminations, the photodiode has revealed high photosensitivity attributed to trapped charge carriers at the interface. The charge carrier density Nd and built-in voltage Vbi were estimated from Mott Schottky (M–S) function suggesting high Schottky diode efficiency.

Novel NaNbO3-based relaxors featuring ultrahigh energy storage performance

Ferroelectric ceramics with ultrahigh power density and fast charging/discharging are attracting increasing attention. The practical application of most antiferroelectric ceramics in current electronics is significantly limited by their poor recoverable energy storage density. Here, a novel system ceramic of (1-x) Na0.84Ca0.16Nb0.84Ti0.16O3-xBiZn2/3Nb1/3O3 (NCNT-xBZN) solid solutions, possessing a giant Wrec∼7.05 J cm−3 and excellent conversion efficiency (η)∼83.7% under 53 kV mm−1, was synthesized to exhibit superior stability with changing temperature, frequency and fatigue behavior, together with the large current density (CD=571.8 A cm−2), ultrahigh power density (PD=85.7 MW cm−3) and ultrafast discharge rate (∼200 ns). These outstanding properties are attributed to the phase transformation from the AFE R to the FE Q phase, accompanied by the smashing of sub-microdomains into polar nanoregions, as the BZN content raises. The experimental results disclose that the synergistic effect of the highly dynamic response of polar nanoregions and the local lattice distortion arising from the disruption of long-range polar ordering by heterovalent ion filling generates a delayed saturation polarization with a strong relaxor behavior, thereby optimizing the energy storage density. The unique combination, together with a simple synthesis strategy, offers a refreshing strategy for the development of dielectric materials.

Lion lords and sharing hyaenas: Carnivore guild dynamics around elephant carcasses.

Megaherbivore carcasses represent sporadic but energetically rewarding resources for carnivores, offering a unique opportunity to study coexistence dynamics between facultative scavengers. South African fenced protected areas, such as Madikwe Game Reserve (Madikwe hereafter), host viable populations of large carnivores and high densities of elephants, Loxodonta africana. However, high carnivore densities can lead to potentially fatal interspecific encounters and increased competition, particularly around high-quality trophic resources. This study explores the temporal partitioning and co-detection strategies of carnivores at six elephant carcasses in Madikwe, aiming to understand how the increased carrion biomass available at elephant carcasses influences coexistence dynamics. Camera traps were deployed to monitor carcasses during two periods (2019 and 2020), revealing occurrences of six carnivore species. Carnivores, particularly black-backed jackals, Lupulella mesomelas, (hereafter jackal), lions, Panthera leo, and spotted hyaenas, Crocuta crocuta, comprised 56.7% of carcass observations, highlighting their pivotal roles in scavenging dynamics. Pairwise co-detection analysis demonstrated consistent association and shared peak activity periods between jackals and spotted hyaenas, indicating potential resource sharing. However, the minimal co-detection rates between lions and other carnivores highlight their resource domination. There was some evidence of temporal partitioning between carnivores, with most species exhibiting earlier peaks in nocturnal activity to avoid temporal overlap with lions. This study emphasises the importance of elephant carcasses in the diet of multiple species and coexistence techniques utilised to exploit this ephemeral resource. As fenced protected areas become crucial for conserving intact carnivore guilds globally, further research into carnivore behavioural adaptations at carcasses is recommended to shed light on their coexistence strategies.

Development of physically based modelling of bubble behaviour for subcooled boiling applications

A methodology for the modelling of phase change phenomena in two-phase flow is presented, based on interface capturing simulation and the mechanistic modelling of interfacial heat and mass transfer. The volume of fluid approach is adopted, utilising a compressive scheme to maintain interface sharpness, allowing a continuum representation of mass and heat source terms to be used. The methodology is verified against analytical solutions for both evaporation and condensation phase change problems, demonstrating excellent agreement even in the case of a large phase density ratio and high rate of evaporation.

Ghost states and surface structures of the charge density wave kagome metal ScV[formula omitted]Sn[formula omitted]

We investigate the high-temperature phase of the kagome metal ScV6Sn6 using scanning tunneling microscopy/spectroscopy (STM/S) and density functional theory calculations. STM topographic images of the cleaved sample reveal two distinct surface terminations: flat islands with Sn termination and trenches terminated by kagome layers with Sn as the outermost atomic layer. STS measurements on the Sn-terminated and kagome-terminated surfaces show significant differences, in particular the presence of large density of states near the Fermi level in the former case. Our first-principles calculations reveal that the charge density on the kagome-terminated surface gives rise to “ghost states” which show intensity away from surface atoms, arising due to hybridization of orbitals above the surface. These states can obscure the intrinsic properties of the surface, potentially leading to misattribution of the surface termination. This underscores the need for careful interpretation in STM studies, especially when discerning surface states of localized states. Understanding the surface structure of this versatile quantum material provides essential information for interpreting surface-sensitive experiments, tailoring material properties, engineering interfaces, and controlling stability and reactivity. This knowledge paves the way for further exploration and potential applications of kagome lattice materials in various fields, including quantum computing, topological physics, and advanced electronic devices.

Unraveling Paradoxical Effects of Large Current Density on Zn Deposition.

Aqueous zinc-based batteries (ZBs) have been widely investigated owing to their intrinsic safety, low cost, and simple assembly. However, the actual behavior of Zn deposition under large current density is still a severe issue associated with obscure mechanism interpretation of ZBs under high loading. Here, differing from the conventional understanding that short circuit is induced by dendrite penetrating under large current density (10-100mA cm-2), the separator permeation effect is unraveled to illustrate the paradox between smooth deposition and short lifespan. Generally, a dense plating morphology is achieved under large current density because of intensive nuclei and boosted plane growth. Nevertheless, in the scenes applying separators, the multiplied local current density derived from narrow separator channels leads to rapid Zn2+ exhaustion, converting the Zn deposition mode from nucleation control to concentration control, which eventually results in separator permeation and short circuit. This effect is validated in other aqueous metal anodes (Cu, Sn, Fe) and receives similar results. Based on the understanding, a micro-pore (150µm) sponge foam is proposed as separators for large-current anodes to provide broader Zn2+ path and mitigate the separator permeation effect. This work provides unique perspectives on coordinating fast-charging ability and anode stability of ZBs.

Superhydrophilic NiFe-LDH@Co9S8-Ni3S2/NF heterostructures for high-current-density freshwater/seawater oxidation electrocatalysts

Designing oxygen evolution reaction (OER) electrocatalysts with high efficiency and stability at large current densities is paramount for achieving hydrogen production through water splitting. In this study, a heterostructured NiFe-LDH coating Co9S8-Ni3S2 grown on nickel foam (NiFe-LDH@Co9S8-Ni3S2/NF) was successfully synthesized. The distinctive hierarchical structures featuring abundant heterointerfaces can effectively expose abundant active sites. The synergistic effect and strong electronic interaction between Co9S8-Ni3S2 and NiFe-LDH can enhance the intrinsic OER activity. Furthermore, the superhydrophilic characteristic of NiFe-LDH@Co9S8-Ni3S2/NF favors close contact between the electrode and electrolyte. Due to these advantages, NiFe-LDH@Co9S8-Ni3S2/NF can provide distinguished OER activity with low overpotentials of 274 mV in alkaline freshwater and 298 mV in alkaline seawater at 1000 mA cm−2, along with outstanding stability at high current density of 500 mA cm−2 over 200 h in both solutions. This study offers a valuable insight into fabricating high-performance OER electrocatalysts for seawater electrolysis in industrial applications.

Recent Advances in Catalytic Compounds Developed by Thermal Treatment of (Zr-Based) Metal–Organic Frameworks

Metal–organic frameworks (MOFs) have been the subject of extensive scientific investigation in the last three decades and, currently, they make up one of the types of compounds most studied for their potential application in a wide range of distinct catalytic processes. Pristine MOF compounds provide several intriguing benefits for catalytic applications, including large interior surface areas and high densities of active sites; high catalytic reaction rates per volume; post-synthesis modifications with complementary catalytic groups; and the ability for multiple functional groups to catalyze the reaction. For most large-scale catalytic applications, including those in fuel processing, gas emission reduction, and chemical synthesis, pristine MOFs often show limited stabilities and opportunities for regeneration at high temperatures. As a result, the real applications of MOFs in these technologies are likely to be constrained, and a controlled thermal modification to prepare MOF-derivative compounds has been applied to induce crystalline structural changes and increase the structural stability of the MOFs, enhancing their potential applicability in more severe catalytic processes. Recent advances concerning the use of this strategy to boost the catalytic potential of MOF-derivative compounds, particularly for stable Zr-based MOFs, are outlined in this short review article.

MEMO: dataset and methods for robust multimodal retinal image registration with large or small vessel density differences

The measurement of retinal blood flow (RBF) in capillaries can provide a powerful biomarker for the early diagnosis and treatment of ocular diseases. However, no single modality can determine capillary flowrates with high precision. Combining erythrocyte-mediated angiography (EMA) with optical coherence tomography angiography (OCTA) has the potential to achieve this goal, as EMA can measure the absolute RBF of retinal microvasculature and OCTA can provide the structural images of capillaries. However, multimodal retinal image registration between these two modalities remains largely unexplored. To fill this gap, we establish MEMO, the first public multimodal EMA and OCTA retinal image dataset. A unique challenge in multimodal retinal image registration between these modalities is the relatively large difference in vessel density (VD). To address this challenge, we propose a segmentation-based deep-learning framework (VDD-Reg), which provides robust results despite differences in vessel density. VDD-Reg consists of a vessel segmentation module and a registration module. To train the vessel segmentation module, we further designed a two-stage semi-supervised learning framework (LVD-Seg) combining supervised and unsupervised losses. We demonstrate that VDD-Reg outperforms existing methods quantitatively and qualitatively for cases of both small VD differences (using the CF-FA dataset) and large VD differences (using our MEMO dataset). Moreover, VDD-Reg requires as few as three annotated vessel segmentation masks to maintain its accuracy, demonstrating its feasibility.

Rapid heating synthesis of ultrafine PtCo nanoparticles anchored on carbon nanofibers as high-performance bifunctional oxygen electrocatalysts for zinc-air batteries

Herein, rapid heating strategy was introduced to synthesize ultrafine PtCo nanoparticles attached to carbon nanofibers (CNFs) by a high heating rate (HHR) up to about 50 °C s−1. This novel tactic is beneficial to the formation and the homogeneous distribution of ultrathin PtCo nanoparticles on CNFs. The acquired PtCo/CNFs-HHR exhibits a half-wave potential of 0.88 V for ORR, along with a low potential difference ΔE of 0.79 V. When used as the cathode catalyst of ZABs, PtCo/CNFs-HHR displays a high open circuit voltage of 1.454 V, large peak power density of 138.6 mW cm−2, and excellent charge–discharge cycle stability over 300 cycles.

Hierarchical porous graphene nanosheets derived from moso bamboo with superior supercapacitor performance

Moso bamboo is regarded as a kind of biomass resource with abundant reserves in nature, and how to achieve its high-value utilization is one of the important research topics widely concerned by the academic community. In this work, hierarchical porous graphene nanosheets with wrinkled structures derived from the natural moso bamboo is obtained via a compact two-step processing method including pyrolysis and chemical activation. The as-prepared ABC-950 possess a large specific surface area of 1758 m2 g−1, pore volume of 1.55 cm3 g−1, mesopores ratio of 75.5 % and high graphitization degree with ID/IG as low as 0.43. With these merits, as the electrode material for supercapacitor, the ABC-950 exhibits a high specific capacitance of 459.4 F g−1 at 1 A g−1 and an excellent rate performance of 82.3 % in 6 M KOH electrolyte. Moreover, the ABC-950 based symmetric supercapacitor shows superior specific capacitance of 112.3 F g−1 at 0.5 A g−1 and an attractive energy density of 15.6 Wh·kg−1 at 250 W kg−1. Moreover, outstanding capacitance retention of about 102.1 % even after 30,000 charge-discharge cycles at a large current density of 10 A g−1. Our work offers a promising method to easily transform moso bamboo into porous graphene nanosheets for the electric energy storage.

Study on Dynamic Mechanical Properties of Sandwich Beam with Stepwise Gradient Polymethacrylimide (PMI) Foam Core under Low-Velocity Impact.

Different PMI foam materials of 52, 110, and 200 kg/m3 were used to design stepwise gradient cores to improve the impact resistance of the sandwich beam. The stepwise gradient core consists of three layers arranged in positive gradient, negative gradient, and sandwich-core (e.g., 200/52/200). These sandwich beams were subjected to the impact of a steel projectile under impact momentum of 10 to 20 kg·m/s, corresponding to impact energy in the range of 12.5 to 50 J. During the test, the impact force was recorded by an accelerometer, and the different failure modes were also obtained. Subsequently, the influence of the layer arrangement on the energy absorption and load transfer mechanism between the different layers was analyzed. The results showed that the top layer with a large density can improve the impact force, but the middle/bottom layer with a low density promoted specific energy absorption. Thus, based on these two points, the negative gradient core (200/110/52) had an excellent specific energy absorption because it can transfer and expand the area to bear the load layer by layer, which improved the energy absorption in each layer. Combined with the failure modes, the load transfer and deformation mechanisms between the layers were also discussed. The present work provided a valuable method to design an efficient lightweight sandwich structure in the protection field.