Lanthanide Nitrate Research Articles

Properties of multiple rare earth oxides co-stabilized YDyGdSmNd-TZP ceramics

TZP starting powders containing 0.6 mol% each of yttria, dysprosia, gadolinia, samaria and neodymia stabilizer were fabricated by a wet chemical route by coating monoclinic zirconia with rare earth nitrates and subsequent calcination. The powders were consolidated by hot pressing in the temperature range between 1250 °C–1500 °C for 1 h at 60 MPa pressure. The materials were characterized with respect to microstructure, phase composition and mechanical properties. The materials combine high fracture toughness over the whole sintering temperature range with moderate hardness and attractive strength. XRD showed that a redistribution of stabilizers takes place during sintering, an initial highly tetragonal phase containing little or no stabilizer is successively eliminated and a stabilizer saturated tetragonal phase is progressively formed. The volume fraction of cubic increases with sintering temperature as the stabilizer content increases. Above 1500 °C, a plate-shaped aluminate phase is formed from the alumina sintering aid and rare earth oxide.

Lanthanide Complexes Containing a Terminal LnIII−O Bond: Hydrolysis as a Tool to Assess f‐Element Bond Covalency

AbstractWe report the preparation, isolation, and reactivity of gas‐phase lanthanide nitrate and acetate complexes featuring the elusive trivalent LnIII=O bond. Complexes [LnIII(O)(X)2]− (X=NO3− or CH3CO2−; Ln=La, Ce, Pr, Nd, Sm, Eu, Tb, Dy, Tm, Lu) are prepared from [LnIII(CH3CO2)(X)3]− precursors through decarboxylation followed by nitromethane or acetone elimination. The oxo complexes hydrolyze at rates indicating LnIII=O bond stability. The rates for [LnIII(O)(NO3)2]− are essentially invariant, whereas those for [LnIII(O)(CH3CO2)2]− exhibit a moderate decrease across the lanthanide series. The kinetics of lanthanide‐oxo bond hydrolysis are assessed in the context of participation of 5d2 electrons in bonding, changes in covalency via variations in 5d orbital energies and radial extensions, and steric crowding around the lanthanide center. The observed fast hydrolysis rates and lack of correlation to electronic and qualitative covalent considerations confirm the expected strong polarization in LnIII=O bonding, with variations in covalency minimally impacting reactivity. The LnIII=O bond reactivity is compared with previous results for LnIII−O⋅ and LnIV=O, and actinide AnIII=O and AnIV=O; implications for lanthanide/actinide and lanthanide/lanthanide partitioning are discussed. Additionally, nitromethane and acetone elimination are demonstrated as useful for inducing a 2e− O‐atom transfer resulting in non‐oxidative formation of lanthanide‐oxos.

Nitrates of cerium and samarium deposit on human enamel independently of a salivary pellicle.

The aim of this study was to analyze the precipitation of Cerium(III)nitrate hexahydrate [Ce(NO3)3] or Samarium(III)nitrate hexahydrate [Sm(NO3)3] solutions on human enamel with and without a salivary pellicle. Investigated parameters were At%Ce and At%Sm measured using energy dispersive x-ray spectroscopy (EDX) after test solution (two concentrations) application. Precipitation of Ce(NO3)3 and Sm(NO3)3 solutions was examined on human enamel with and without a salivary pellicle. 6 enamel specimens each were obtained from 12 freshly extracted human third molars. These specimens were ground flat and polished. A salivary pellicle was created on 3 of the 6 specimens per tooth by storing the samples in human saliva. Subsequently, an aqueous solution of Ce(NO3)3 was applied to 2 of the 6 specimens (one with, one without salivary pellicle) for 60 s. The same was carried out with an aqueous solution of Sm(NO3)3 on 2 further specimens. The remaining 2 specimens from each tooth were treated with demineralized water (negative control). Ce(NO3)3 and Sm(NO3)3 solutions were applied at 25 or 50 wt% (aqueous solutions). The test materials and concentrations were distributed using a randomization table. After 60 s exposure and rinsing with demineralized water, the elemental composition (Ce, Sm, Ca, P, O, N, Na, Mg) of the enamel surface was analyzed by EDX. Atomic percentages (At%), differences (ΔAt%) and calcium/phosphorous-ratios (Ca/P-ratios) were calculated and analyzed non-parametrically (α = 0.05). 2.0-2.3 At%Ce (median) was detected on Ce(NO3)3-treated enamel and 0.4-0.7 At% Sm (median) was detected on Sm(NO3)3-treated enamel. Ce was only detected on the surfaces after application of Ce(NO3)3, Sm only after application of Sm(NO3)3. The Ca/P-ratio was significantly lower (1.37-1.59; p = 0.028) after the application of 25% and 50%Ce(NO3)3 as well as 50%Sm(NO3)3 compared to the control treatment (demineralized water; 1.61-1.63). After treatment with Ce(NO3)3, At%Ca and At%Na were significantly lower (p ≤ 0.043) compared to treatment with Sm(NO3)3. No significant differences were found between specimens treated with 25% or 50% lanthanide nitrate solution. Presence of a salivary pellicle had no significant influence on the measured At% with the exception of specimens treated with 50% Sm(NO3)3 with increased At%Sm (p ≤ 0.046). Ce(NO3)3 and Sm(NO3)3 precipitate on human enamel independently of the presence of a salivary pellicle.

Physicochemical Characterization and Antimicrobial Properties of Lanthanide Nitrates in Dilute Aqueous Solutions.

This work presents the results of studying dilute aqueous solutions of commercial Ln(NO3)3 · xH2O salts with Ln = Ce-Lu using X-ray diffraction (XRD), IR spectroscopy, X-ray absorption spectroscopy (XAS: EXAFS/XANES), and pH measurements. As a reference point, XRD and XAS measurements for characterized Ln(NO3)3 · xH2O microcrystalline powder samples were performed. The local structure of Ln-nitrate complexes in 20 mM Ln(NO3)3 · xH2O aqueous solution was studied under total external reflection conditions and EXAFS geometry was applied to obtain high-quality EXAFS data for solutions with low concentrations of Ln3+ ions. Results obtained by EXAFS spectroscopy showed significant contraction of the first coordination sphere during the dissolution process for metal ions located in the middle of the lanthanide series. It was established that in Ln(NO3)3 · xH2O solutions with Ln = Ce, Sm, Gd, Yb (c = 134, 100, 50 and 20 mM) there are coordinated and, to a greater extent, non-coordinated nitrate groups with bidentate and predominantly monodentate bonds with Ln ions, the number of which increases upon transition from cerium to ytterbium. For the first time, the antibacterial and antifungal activity of Ln(NO3)3 · xH2O Ln = Ce, Sm, Gd, Tb, Yb solutions with different concentrations and pH was presented. Cross-relationships between the concentration of solutions and antimicrobial activity with the type of Ln = Ce, Sm, Gd, Tb, Yb were established, as well as the absence of biocidal properties of solutions with a concentration of 20 mM, except for Ln = Yb. The important role of experimental conditions in obtaining and interpreting the results was noted.

Bimetallic Ba(II)-Cr(III) and trimetallic Ba(II)-Ln(III)-Cr(III) (Ln(III) = Gd, Tb, Dy, Ho, Er, Yb, Y) coordination polymers formed by Cr(III)-containing building blocks with cyclopropane-1,1-dicarboxylate anions

The reaction of chromium(III) nitrate with Ba(cpdc) (H2cpdc = cyclopropane-1,1-dicarboxylic acid) in a ratio of 1:3 yielded a 1D coordination polymer {[Ba2Cr2(OH)2(cpdc)4(H2O)8]·5H2O}n (1) formed by binuclear units [Cr2(OH)2(cpdc)4]4− and a 3D polymer [Ba2Cr(cpdc)3(NO3)(H2O)6]n (2) constructed from tris-chelate blocks [Cr(cpdc)3]3−. The addition of rare-earth metal nitrates (Cr:Ln = 1:2) in this reaction led to the formation of a series of trimetallic 3D coordination polymers {[Ba3Ln2Cr4(cpdc)12(H2O)24]·8H2O}n (3Ln, Ln = Gd, Tb, Dy, Ho, Er, Yb, Y), in whose structures tris-chelate fragments [Cr(cpdc)3]3− are bound in layers by Ln3+ ions and, further, in a framework due to the coordination of Ba2+ ions. The crystal structures of 1, 2, and 3Gd were determined by single-crystal X-ray diffraction (XRD), and isostructurality of all the compounds in the series 3Ln was proved by powder X-ray diffraction (PXRD). DC-magnetic susceptibility measurements revealed weak ferromagnetic exchange interactions between Cr3+ ions in compound 1 (J = +0.74 cm−1). According to ac-magnetic susceptibility measurements, complexes 3Er and 3Y exhibit field-induced slow relaxation of magnetization. According to the data of simultaneous thermal analysis (STA) and differential scanning calorimetry (DSC) performed under Ar atmosphere, dehydration of the compounds obtained takes place in one (for 1 and 3Gd) or three stages (for 2). The initial temperature of the organic part degradation process decreases when moving from compound 1 containing dimerized bis-chelate fragments [Cr2(OH)2(cpdc)4]4− (330 °C) to compounds 2 (276 °C) and 3Gd (261 °C) based on tris-chelate units [Cr(cpdc)3]3−.

Supramolecular assemblies derived from methyl-substituted cucurbit[5]uril and lanthanide nitrates

Interaction of the lanthanide nitrates M(NO3)3 (M = Gd, Eu) with methylcucurbit[5]uril (Me10Q[5]) in the presence of transition metal chlorides (ZnCl2 and FeCl3) in acidic media resulted in the isolation of the complexes [Me10Q[5]Gd(H2O)2Cl Gd(H2O)6](ZnCl4)2∙Cl∙8.9H2O (1) and [Me10Q[5]Eu(H2O)3Cl(H3O)](FeCl4)3 (2). The molecular structures of 1 and 2 have been determined by single crystal X-ray crystallography, and reveal discrete complexes which are involved in dense stacking with adjacent Me10Q[5]s linked via H-bonding and/or metal anions resulting in a supramolecular assembly.

Solid State and Solution Structures of Lanthanide Nitrate Complexes of Tris-(1-napthylphosphine oxide).

Coordination complexes of lanthanide metals with tris-1-naphthylphosphine oxide (Nap3PO, L) have not been previously reported in the literature. We describe here the formation of lanthanide(III) nitrate complexes Ln(NO3)3L4 (Ln = Eu to Lu) and the structures of [Ln(NO3)3L2]·2L (Ln = Eu, Dy, Ho, Er) and L. The core structure of the complexes is an eight-coordinate [Ln(NO3)3L2] with the third and fourth ligands H-bonded via their oxygen atoms to one of the naphthyl rings. The structures are compared with those of the analogous complexes of triphenylphosphine oxide and show that the Ln-O(P) bond in the Nap3PO complexes is slightly longer than expected on the basis of differences in coordination numbers. The reaction solutions, investigated by 31P and 13C NMR spectroscopy in CD3CN, show that coordination of L occurs across the lanthanide series, even though complexes can only be isolated from Eu onwards. Analysis of the 31P NMR paramagnetic shifts shows that there is a break in the solution structures with a difference between the lighter lanthanides (La-Eu) and heavier metals (Tb-Lu) which implies a minor difference in structures. The isolated complexes are very poorly soluble, but in CDCl3, NMR measurements show dissociation into [Ln(NO3)3L2] and 2L occurs.

Synthesis, characterization, crystal structures and biological activity of 4-chloro-2-(2-hydroxy-3-ethoxybenzylideneamino)phenol and complexes

Molecular nanoclusters comprising a heterometallic 3d-4f stoichiometry are an interesting class of compounds. In this paper, a chloro-containing Schiff base 4-chloro-2-(2-hydroxy-3-ethoxybenzylideneamino)phenol (H2L) was prepared by condensation reaction of 3-ethoxysalicylaldehyde with 2-amino-4-chlorophenol in methanol. The Schiff base is predisposed to chelate within a cluster core both 3d and 4f metal ions. Reaction of H2L with nickel salts afforded a tetranuclear NiII complex [Ni4L4(MeOH)4] (1), while with nickel salts and lanthanide(III) nitrate three tetranuclear NiII-LnIII complexes [Ni2Eu2L4(NO3)2(DMF)2] (2), [Ni2Er2L4(NO3)2(DMF)2] (3), [Ni2Tb2L4(CH3COO)2(DMF)2]·4DMF (4) were obtained. H2L and the complexes have been characterized by elemental analysis, IR, UV–Vis spectra. H2L has also been characterized by 1H and 13C NMR spectra. Molecular structures of the compounds have been determined by single crystal X-ray determination. In the complexes, the Schiff base ligands coordinate to the metal atoms via ether oxygen, imino nitrogen and two phenolate oxygen atoms. All the Ni atoms in the complexes are in octahedral coordination. The rare earth metal atoms are eight coordinated by the phenolate and ether oxygen of the Schiff base ligands, and anionic and solvent oxygen atoms, forming square antiprismatic coordination. The compounds were evaluated for their antibacterial activities on Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Pseudomonas fluorescens, and antifungal activities on Candida albicans and Aspergillus niger, and gave interesting results.

DFT Analysis of the Binding of Rare Earth Nitrates at Internal and External Surfaces of MCM-22

DFT Analysis of the Binding of Rare Earth Nitrates at Internal and External Surfaces of MCM-22

Isothermal compressibility, internal pressure studies of aqueous rare earth nitrate solutions at 298.15 K: An attempt to estimate ionic radii and understand inner– and outer–sphere exchange water structural interactions

In this communication, we report our analysis and results concerning the determination of ionic radii in aqueous solution phase for Lanthanum (La+3), Neodymium (Nd+3), Erbium (Er+3) and Ytterbium (Yb+3) ions in presence of nitrate (NO3-) anion at 298.15 K. The literature data for density, adiabatic compressibility, and specific heat capacity of solutions at constant pressure have been used to compute isothermal compressibility, internal pressure of solutions in limiting concentration range. The apparent molar isothermal compressibility of electrolytes and hydration numbers have been obtained. The electrostriction for rare earth cations and intrinsic volumes have been calculated using thermodynamic equations. The ionic radii of cations have been obtained using the ionic partial molar volume data of NO3- ions and the results are compared with those obtained for rare earth chlorides. The two series affect is also observed for ionic radii and internal pressure. The results have been explained on the basis of water structural effects due to electrostatic field and water dipole interaction between the inner– and outer–sphere water exchange reaction.

Coordination compounds of indium, gadolinium, and erbium nitrates with low urea content

Objectives. To date, compounds of rare earth nitrates with urea in a ratio of 1:4 and indium in a ratio of 1:6 have been synthesized and structurally characterized. However, there is a lack of research into similar compounds having a lower urea content. The purpose of this work was to continue the search for regularities of structure formation for complexes of various elements with urea.Methods. Novel coordination compounds were synthesized and characterized by powder- and single-crystal X-ray diffraction analysis, as well as infrared spectroscopy.Results. The interaction of indium, gadolinium and erbium nitrates with urea (Ur) in an aqueous solution under conditions of ligand deficiency produces the previously unknown coordination compounds cis-[In(Ur)4(NO3)2]NO3, [Gd(H2O)2(Ur)2(NO3)3], and [Er(H2O)2(Ur)(NO3)3]. The indium complex is shown to have an ionic structure, whereas the gadolinium and erbium complexes have a molecular structure. In the indium complex, the coordination number is 6; the cation has an octahedral structure; it involves two cis-arranged monodentate nitrate groups and four monodentate urea molecules. The coordination number of gadolinium is 10; here, the coordination polyhedron is a distorted pentagonal bipyramid at the vertices of which there are two water molecules, while in the internal polygonal base there are two monodentate urea molecules and three bidentate chelating nitrate groups oriented perpendicular to the polygonal base of the bipyramid. The coordination number of erbium is 9; the coordination polyhedron is a distorted tricapped trigonal prism.Conclusions. In contrast with the gadolinium complex, one urea molecule is coordinated in the erbium complex instead of two, decreasing the coordination number from 10 to 9. In the indium complex cation, the coordination number is 6; unlike the gadolinium and erbium complexes, the cation does not contain water, and the nitrate groups are monodentate.

First 4,7-oxygenated 1,10-phenanthroline-2,9-diamides: synthesis, tautomerism and complexation with REE nitrates.

A new family of phenanthroline ligands was prepared. Hydrolysis of 4,7-dihalogenated 1,10-phenanthroline-2,9-diamides in acidic media leads to the formation of the corresponding 4,7-oxygenated derivatives. These ligands can exist in different tautomeric forms. The tautomerism of 4,7-oxygenated phenanthroline diamides has been investigated using quantum chemical calculations. The unsymmetrical oxo-hydroxy tautomeric form was proved to be the most energetically advantageous according to the spectral data and X-ray analysis. It was shown that 4,7-difluoro derivatives undergo acid hydrolysis more easily when compared to 4,7-dichloro derivatives. The coordination chemistry of 4,7-oxygenated 1,10-phenanthroline-2,9-diamides toward some lanthanide nitrates was investigated. The structures of Ln-complexes thus formed were studied both in the solid state and in solution (XRD analysis and IR, NMR and UV spectroscopy). It was revealed that 4,7-oxygenated ligands adopt the dihydroxy tautomeric form upon coordination with lanthanide nitrates.

In situ hydrolysis of a carbophosphazene ligand leads to one-dimensional lanthanide coordination polymers. Synthesis, structure and dynamic magnetic studies.

An in situ hydrolysis of the P-Cl bonds of the carbophosphazene [{NC(NMe2)}2{NPCl2}] (LPCl2) in the presence of hydrated lanthanide(III) nitrates in a dichloromethane and methanol (2 : 1) solvent mixture afforded a series of novel 1D coordination polymers: [{Ln(LHPO2)3(NO3)2(CH3OH)(H2O)} (Cl)]n {where Ln(III) = Gd (1), Tb (2), Dy (3), or Er (4) and LHPO2 is the hydrolyzed carbophosphazene (LPCl2) ligand}. X-ray crystallographic analysis revealed that complexes 1-4 are isostructural and crystallized in the monoclinic crystal system having P21/c space group. The coordination polymers are formed because of the involvement of the geminal P(O)(OH) moieties of the carbophosphazene ligand. Each lanthanide(III) ion is 9-coordinate (9O) in a distorted muffin geometry. Magnetic measurements revealed that both DyIII and ErIII analogues exhibit field-induced single-molecule magnet (SMM) behavior at 0.8 kOe and 2.2 k Oe, respectively. At such dc fields, the dynamic magnetic susceptibility displays complex behavior with a triple magnetic relaxation contribution for 3, while two contributions were identified for 4. The observed static and dynamic magnetic behavior for complexes 1-4 were further rationalized with the aid of BS-DFT and CASSCF/SO-RASSI/SINGLE_ANISO calculations.

Lanthanide Metal-Organic Frameworks Exhibiting Fluoro-Bridged Extended Chains: Synthesis, Crystal Structures, and Magnetic Properties.

Two fluoro-bridged lanthanide-containing metal-organic frameworks (MOFs) were synthesized using 2,2'-bipyridine-4,4'-dicarboxylic acid (BPDC), a fluorinated modulator, and a lanthanide nitrate. The syntheses of MOFs containing Gd3+ or Tb3+ and a closely related MOF structure containing Ho3+, Gd3+, or Tb3+ are presented. The presence of the fluorinated metal chains in these MOFs is shown through single crystal X-ray diffraction, energy dispersion X-ray spectroscopy, 19F nuclear magnetic resonance, and X-ray photoelectron spectroscopy. Magnetic measurements reveal weak antiferromagnetic exchange between the Ln3+ ions mediated by fluoride anions along the zigzag ladder chains present in the crystal structures of these MOFs.

Synthesis of Highly Luminescent Silica-Coated Upconversion Nanoparticles from Lanthanide Oxides or Nitrates Using Co-Precipitation and Sol-Gel Methods.

Upconversion nanoparticles (UCNPs) are under consideration for their use as bioimaging probes with enhanced optical performance for real time follow-up under non-invasive conditions. Photostable and core-shell NaYF4:Yb3+, Er3+-SiO2 UCNPs obtained by a novel and simple co-precipitation method from lanthanide nitrates or oxides were herein synthesized for the first time. The sol-gel Stöber method followed by oven or supercritical gel drying was used to confer biocompatible surface properties to UCNPs by the formation of an ultrathin silica coating. Upconversion (UC) spectra were studied to evaluate the fluorescence of UCNPs upon red/near infrared (NIR) irradiation. ζ-potential measurements, TEM analyses, XRD patterns and long-term physicochemical stability were also assessed and confirmed that the UCNPs co-precipitation synthesis is a shape- and phase-controlling approach. The bio- and hemocompatibility of the UCNPs formulation with the highest fluorescence intensity was evaluated with murine fibroblasts and human blood, respectively, and provided excellent results that endorse the efficacy of the silica gel coating. The herein synthesized UCNPs can be regarded as efficient fluorescent probes for bioimaging purposes with the high luminescence, physicochemical stability and biocompatibility required for biomedical applications.

Decomposition of liquid-liquid extraction organic phase structure into critical and pre-peak contributions

Solution nanostructure induced by amphiphile self-association plays an important role in various chemical and physical processes, including liquid-liquid extraction (LLE). Small angle scattering techniques are an essential means of probing this structure, but, due to non-uniqueness of scattering patterns, their interpretation is not trivial. Here, we decompose small angle x-ray scattering (SAXS) patterns for a range of binary LLE organic phases into two components: Ornstein-Zernike and pre-peak contributions resulting from, respectively, critical concentration fluctuations and packing of the amphiphilic extractant molecules in the nonpolar aliphatic diluent. While we previously applied Ornstein-Zernike scattering models to similar organic phases, including the pre-peak explicitly in the fit allows us to measure weak fluctuations at high extractant concentration and simultaneously obtain information on the position and intensity of the correlation peak related to amphiphile packing. Scattering patterns and partial structure factors calculated from molecular dynamics simulations support this interpretation. We demonstrate how this minimal scattering model describes nanostructuring for a large number of extractant types over their entire extractant/diluent composition ranges, suggesting simple and universal behavior. The straightforward assignment of these structural contributions facilitates the comparison of these features between different classes of extractant molecules and will enable further studies of organic phase aggregation. Applicability to more complex, process-relevant organic phases is illustrated with post-contact organic phases containing significant quantities of extracted lanthanide nitrate salt, which we find are readily described by this model.

4-Oxo-7-fluoro-1,10-phenanthroline-2,9-diamides: Synthesis, Structural Features, Lanthanide Complexes, and Am(III)/Ln(III) Solvent Extraction.

A highly efficient synthetic approach was developed for the synthesis of unsymmetrical 1,10-phenanthroline-2,9-diamides with two different substituents in the fourth and seventh positions of the phenanthroline core. The structures of these ligands were confirmed using various spectral methods including 2D-NMR and X-ray analysis. Quantum chemical calculations supported the presence of tautomeric forms of these ligands. Furthermore, it was discovered that these compounds exhibit polydentate ligand behavior toward lanthanide nitrates. The structural characteristics of the complexes formed between these ligands and lanthanide nitrates were investigated both in the solid state and in solution. To further understand the binding properties of these novel unsymmetrical ligands, the binding constants for potential complexes were quantitatively measured by using UV-vis spectrophotometric titration. This allowed for a comprehensive analysis of the binding affinity and stability of these complexes. Extraction experiments of f-elements were performed for symmetrical and unsymmetrical diamides. Overall, this study presents significant advancement in the synthesis and characterization of unsymmetrical 1,10-phenanthroline-2,9-diamides and provides valuable insights into their potential applications as polydentate ligands for lanthanide nitrates.

Luminescent lanthanide mixed N-phthaloylglycinate and terephthalate coordination polymers: Structural and optical properties.

A new class of lanthanide mixed-carboxylate ligands compounds with formula {[Ln2 (phthgly)4 (bdc)(H2 O)6 ]·(H2 O)4 }∞ , labelled as Ln3+ : Eu (1) and Gd (2) coordination polymers (CP) were synthesized under mild reaction conditions between lanthanide nitrate salts and a solution of N-phthaloylglycine (phthgly) and terephthalic (bdc) ligands. The (1) and (2) coordination polymers were formed by symmetric binuclear units, in which phthgly and bdc carboxylate ligands are coordinated to the lanthanide ions by different coordination modes. Surprisingly, all organic ligands participate in hydrogen bonding interactions, forming an extremally rigid crystalline structure. The red narrow emission bands from the 5 D0 →7 FJ transitions of the Eu3+ ion show a high colour purity. The intramolecular energy transfer process from L→Eu3+ ion has been discussed. The experimental intensity parameters (Ω2,4 ) reflect lower angular distortion and polarizability of the chemical environment around the metal ion compared with other Eu3+ compounds reported in the literature. This novel class of coordination polymer offers a more attractive platform for developing luminescent functional materials for different applications.

Lanthanide‐Functionalized Water‐Soluble Ionic Motors: Synergetically Regulated Rotary Motion by Allostery and Triplet Sensitization

AbstractMolecular motors, based on overcrowded alkenes (L) serving as ligands to chelate lanthanide nitrate, afford the first lanthanide‐functionalized water‐soluble ionic compound [L2‐Ln(NO3)2(H2O)2]·NO3 (LnL2). Benefitting from the “pull–push” feature of L together with 3LMCT from L to LnIII, irradiation with visible light not only drives photochemical isomerization but also induces energy transfer from L to LnIII, decreasing their intensity of low‐energy 3LMCT (ligand‐to‐metal triplet energy transfer) absorptions and sensitizing the Ln‐based luminescence. Thus, the typical EuIII‐based luminescence of EuL2 favors tracing its movement by time‐resolved luminescence, and temperature‐dependent luminescence renders it possibly to be used as potential luminescent thermometers. Very excitingly, besides a contraction of the stator by Ln–L interactions on decreasing the steric hindrance on the “fjord region,” the efficiency of intramolecular 3LMCT sensitization synergetically regulates the rotary motion of lanthanide‐complexed motors in thermal helix inversion steps.

Characterization of europium doped yttrium nano-oxide prepared by plasma electrolysis in nitrate solution under air atmosphere at room temperature

Europium-doped yttrium oxide is widely used because its unique optical properties, excellent thermal stability, and chemical stability. This paper reports a process for preparing a Y2O3:Eu3+ red fluorescent material through plasma discharge electrolysis at room temperature in a normal atmosphere and a 0.38 M Y(NO3)3 - 0.02 M Eu(NO3)3 mixed rare earth nitrate solution. Several techniques, including emission spectroscopy, X-ray diffraction, TG-DSC thermal analysis, Fourier transform infrared spectroscopy and photoelectron spectroscopy, were performed to characterize the electrolysis process and the obtained products. The results show that the electrolytic products were mainly composed of Y(OH)3, the electrolytic hydroxide products were not obviously granular, and Eu was uniformly distributed in the products. After heat treatment at 400–900 °C, cubic phase yttrium oxide was formed, and the products were irregular spherical, with particle sizes between 30 and 200 nm. After annealing at 800 °C, the products showed strong red emission at 612 nm, corresponding to 5D0→7F2 excitation. In addition, charge transfer band (CTB) absorption was observed in the excitation spectrum, and the emission spectra of fluorescent materials also showed some sharp emission bands generated by the 5D0→7FJ (J = 0,1,3,4) transition. The colour coordinate of the Y2O3:Eu3+ powder produced by plasma electrolysis is close to the standard red coordinate, showing excellent colour properties.