Lanthanide Polyoxometalates Research Articles

A novel polyoxometalate chain constructed from sandwich lanthanide-containing polyanion [Ce(PW 11O 39) 2] 10− and sodium ion linker

A novel sandwich-type lanthanide polyoxometalate (NH 4) 2[N(CH 3) 4] 6Na 2[Ce(PW 11O 39) 2] · 14H 2O ( 1) has been synthesized and characterized by cyclic voltammetry, IR spectroscopy and single crystal X-ray diffraction. X-ray diffraction result reveals that the sandwich-type polyanions are linked by sodium ions to form a structure of zigzag chains, and the chains are further connected into an extensive two-dimensional (2D) framework depending on hydrogen bond.

Influence of the Lanthanide Ion and Solution Conditions on Formation of Lanthanide Wells–Dawson Polyoxotungstates

Lanthanide complexes of polyoxometalates, including the α2-P2W17O61 10− ligand, have been pioneered by Michael T. Pope, to whom this paper is dedicated. Examination of the solid-state and solution behavior of lanthanide complexes of the α2-P2W17O61 10− ligand are reported here to identify trends that will facilitate rational synthesis of hybrid organic lanthanide polyoxometalate complexes. Therefore, combining our data with that obtained by Pope and others a number of trends come into view. It is clear that there are two structural types for the 1:1 or 2:2 [Ln(H2O)X(α2-P2W17O61)]2 14− species. The early lanthanides show a “cap to cap” structure that allows the Ln ion to be 9 coordinate and accommodates the longer bond lengths. The mid-late lanthanides show a “cap to belt” structure that allows the lanthanides to be 8 coordinate; this structural type is appropriate for the shorter bond lengths of the later lanthanides. The 1:1⇌1:2 equilibrium, that was observed by Pope for the Ce(III) analog is prevalent for the early- mid lanthanides. This equilibrium is slightly dependent on pH; however, cations have a major influence on this equilibrium. Larger, poorly hydrated cations appear to favor the 1:2 species for the early to mid lanthanides. Cations do not appear to influence the equilibrium for the later lanthanides; for all counterions, the 1:1 species was stable with no trace of the 1:2 species. Stability constants, K1 and K2, for the early to mid lanthanides were measured in this study by a competitive method and compared well with other published stability constant determinations. We suggest that the stability constants are not only dependent on the strength of interaction of the Ln with the α2-P2W17O61 10− ligand, but are also significantly influenced by the medium. The medium may bias the equilibria of the early-mid lanthanides and later lanthanides. The log K1/log K2 ratios are very close, suggesting that it is difficult to separate the 1:1 and 1:2 Ln: α2-P2W17O61 10− species.

Production and Reactions of Organic-Soluble Lanthanide Complexes of the Monolacunary Dawson [α1-P2W17O61]10-Polyoxotungstate

The incorporation of lanthanides into polyoxometalates provides entry to new classes of potentially useful materials that combine the intrinsic properties of both constituents. To utilize the [alpha1-Ln(H2O)4P2W17O61]7- species in applications of catalysis and development of luminescent materials, the chemistry of this family of lanthanide polyoxometalates in organic solvents has been developed. Organic-soluble polyoxometalate-lanthanide complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] (Ln = La(III), Sm(III), Eu(III), Yb(III)) were prepared and characterized by elemental analysis, acid-base titration, IR, 31P NMR, and mass spectrometry. The synthetic procedure involves a cation metathesis reaction in aqueous solution under strict pH control. A solid-liquid-phase transfer protocol yielded a unique species (TBA)8K3[Yb(alpha1-YbP2W17O61)2] with three ytterbium ions and two [alpha1-P2W17O61]10- polyoxotungstates. A centrosymmetric dimeric complex [{alpha1-La(H2O)4P2W17O61}2]14- was crystallized from aqueous solution and characterized by X-ray diffraction. ESI mass spectral analysis of the complexes TBA5H2[alpha1-Ln(H2O)4P2W17O61] shows that similar dimers exist in organic solution, in particular for the early lanthanides. Fragmentation in the mass spectrometer of the complexes from dry acetonitrile solution involves double protonation of an oxo ligand and loss of one water molecule. Low mass tungstate fragments combine into [(WO3)n]2- (n = 1-5) ions and their condensation products with phosphate. Reaction of TBA5H2[alpha1-Eu(H2O)4P2W17O61] with 1,10-phenanthroline or 2,2'-bipyridine showed an increase of the europium luminescence. This result is explained by the formation of a ternary complex of [alpha1-Eu(H2O)4P2W17O61]7- and two sensitizing ligands.

Influence of Steric and Electronic Properties of the Defect Site, Lanthanide Ionic Radii, and Solution Conditions on the Composition of Lanthanide(III) α1-P2W17O6110- Polyoxometalates

This study identifies the principles that govern the formation and stability of Ln complexes of the (alpha(1)-P(2)W(17)O(61))(10-) isomer. The conditional stability constants for the stepwise formation equilibria, K(1cond) and K(2cond), determined by (31)P NMR spectroscopy, show that the high log K(1cond)/log K(2cond) ratio predicts the stabilization of the 1:1 Ln/ (alpha(1)-P(2)W(17)O(61))(10-) species. The value of log K(1cond) increases as the Ln series is traversed, consistent with the high charge/size requirement of the basic alpha(1) defect site. The conditional stability constants, K(2), are very low and are highly dependent on the countercations in the buffer. The source of the instability is understood from the crystal structures of the early-mid lanthanide analogues, where the close contact of the (alpha(1)-P(2)W(17)O(61))(10-) units result in severe steric encumbrance. The electronic properties of the alpha(1) defect along with the lanthanide ionic radii and countercation composition are important parameters that need to be considered for a rational synthesis of lanthanide polyoxometalates.

Aqueous Speciation Studies of Europium(III) Phosphotungstate.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Aqueous Speciation Studies of Europium(III) Phosphotungstate

The incorporation of lanthanide ions into polyoxometalates may be a unique approach to generate new luminescent, magnetic, and catalytic functional materials. To realize these new applications of lanthanide polyoxometalates, it is imperative to understand the solution speciation chemistry and its impact on solid-state materials. In this study we find that the aqueous speciation of europium(III) and the trivacant polyoxometalate, PW9O34 9-, is a function of pH, countercation, and stoichiometry. For example, at low pH, the lacunary (PW11O39)7- predominates and the 1:1 Eu(PW11O39)4-, 2, forms. As the pH is increased, the 1:2 complex, Eu(PW11O39)2 11- species, 3, and (NH4)22[(Eu2PW10O38)4(W3O8(H2O)2(OH)4].44H2O, a Eu8 hydroxo/oxo cluster, 1, form. Countercations modulate this effect; large countercations, such as K+ and Cs+, promote the formation of species 3 and 1. Addition of Al(III) as a counterion results in low pH and formation of [Eu(H2O)3(alpha-2-P2W17O61)]2, 4, with Al(III) counterions bound to terminal W-O bonds. The four species observed in these speciation studies have been isolated, crystallized, and characterized by X-ray crystallography, solution multinuclear NMR spectroscopy, and other appropriate tech-niques. These species are 1, (NH4)22[(Eu2PW10O38)4(W3O8(H2O)2(OH)4].44H2O (P; a=20.2000(0), b=22.6951(6), c=25.3200(7) A; alpha=65.6760(10), beta=88.5240(10), gamma=86.0369(10) degrees; V=10550.0(5) A3; Z=2), 2, Al(H3O)[Eu(H2O)2PW11O34].20H2O (P, a=11.4280(23), b=11.5930(23), c=19.754(4) A; alpha=103.66(3), beta=95.29(3), gamma=102.31(3) degrees; V =2456.4(9) A3; Z=2), 3, Cs11Eu(PW11O34)2.28H2O (P; a=12.8663(14), b=19.8235(22), c=21.7060(23) A; alpha=114.57(0), beta=91.86(0), gamma=102.91(0) degrees ; V=4858.3(9) A3; Z=2), 4, Al2(H3O)8[Eu(H2O)3(alpha-2-P2W17O61)]2.29H2O (P; a=12.649(6), b=16.230(8), c=21.518(9) A; alpha=111.223(16), beta=94.182(18), gamma=107.581(17) degrees ; V=3842(3) A3; Z=1).

A series of novel lanthanide polyoxometalates: condensation of building blocks dependent on the nature of rare earth cations.

A series of novel lanthanide polyoxomolybdates was synthesized by reaction of lanthanide cations with the Anderson type anion (TeMo(6)O(24))(6-). The polyoxometalates K(6n)(TeMo(6)O(24))(n)[(Ln(H(2)O)(7))(2)(TeMo(6)O(24))](n)[middle dot]16nH(2)O (Ln = Eu, Gd) and K(3n)[Ln(H(2)O)(5)(TeMo(6)O(24))](n)[middle dot]6nH(2)O (Ln = Tb, Dy, Ho, Er) were characterized by X-ray structure analysis, elemental analysis and IR spectroscopy. We found that the solid-state structures of Ln/(TeMo(6)O(24))(6-) compounds are strongly dependent on the lanthanide cations, and therefore represent a rare example for different arrangements of building units depending on the nature of the rare earth cations. While the Eu(3+) and Gd(3+) cations achieve ninefold coordination by seven water molecules and two terminal oxygen atoms of the (TeMo(6)O(24))(6-) anions, the Tb(3+), Dy(3+), Ho(3+) and Er(3+) cations are coordinated by five water molecules, two terminal oxygen atoms and one molybdenum-bridging oxygen atom belonging to the (TeMo(6)O(24))(6-) anion. The europium and gadolinium substituted compounds contain infinite one-dimensional [(Ln(H(2)O)(7))(2)(TeMo(6)O(24))](n) chains; the terbium, dysprosium, holmium and erbium compounds contain infinite one-dimensional [Ln(H(2)O)(5)(TeMo(6)O(24))](n)(3n-) chains.

Layer-by-Layer Self-Assembled Ultrathin Multilayer Films of Lanthanide Polyoxometalates and Poly(allylamine Hydrochloride) and Their Photoluminescent Properties

Ultrathin multilayer films of two lanthanide polyoxometalates (LPOMs), K17[Eu(P2W17O61)2] (EPW) and K13[Eu(SiW11O39)2] (ESW), and poly(allylamine hydrochloride) (PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solutions. UV-vis spectroscopy and ellipsometry respectively show that the absorbance values at characteristic wavelengths and the thicknesses of the multilayer films increase linearly with the number of LPOM/PAH bilayers, suggesting that the deposition process is linear and highly reproducible from layer to layer. Average thicknesses of ca. 3.4 and 2.4 nm were determined for the EPW/PAH and ESW/PAH bilayers by ellipsometry, respectively. In addition, scanning electron microscopy (SEM) and atomic force microscopy (AFM) images provide the surface morphology of the LPOM/PAH films, indicating that the film surface is relatively uniform and smooth. The photoluminescent properties of these films have also been investigated by fluorescence spectroscopy. The LPOM/PAH multilayer film has a good thermal stability as shown by UV-vis, X-ray photoelectron, and fluorescence spectra.