Langmuir Isotherm Research Articles

Facile Fabrication of Hydroxyapatite and Bentonite Encapsulated Biopolymeric Hybrid Composites for Selective Removal of Methylene Blue

AbstractDyeing industries release their hazardous dyeing effluents into the environment which affects the human health and ecosystem. Hence, the removal of dye from waste‐water is mandatory one. In this present study, focus on the fabrication of bio‐clay‐ceramic hybrid composites by dispersing bentonite (BT) clay and ceramic hydroxyapatite (HA) into alginate (Alg) and gelatin (Gel) polymeric matrixes by in‐situ method which gives BTHAAlg and BTHAGel hybrid composites for methylene blue (MB) removal. The various adsorption influencing parameters such as shaking time, adsorbent dosage, pH and initial MB concentration were optimized under batch method. The highest MB adsorption capacities of BTHAAlg and BTHAGel composites were found to be 43.70 and 47.50 mg/g respectively with optimized conditions of 100 mg/L of initial MB concentration, 40 min shaking time and 0.1 g dosages. In pH studies, the high MB adsorption capacity of bio‐clay‐ceramic composites were noticed at pH 11. The characterization techniques like FTIR, SEM and EDAX analysis were performed to find the physico‐chemical properties of bio‐clay‐ceramic composites. The equilibrium data of hybrid composites towards MB adsorption was well fitted with Langmuir isotherm model than D‐R and Fruendlich models because of higher r and low sd values. The negative values of ▵Go at three different temperatures (303, 313 and 323 K) indicate that the spontaneous nature of MB adsorption, while positive values of ΔHo and ΔSo revealed that the MB adsorption onto hybrid composites was endothermic in nature and more randomness occurred at solid/liquid interfaces. In kinetic studies, the MB adsorption onto hybrid composites was well fitted with pseudo‐second‐order and intra‐particle diffusion models. The electrostatic attraction and hydrogen bonding plays a dominant role in MB adsorption onto BTHAAlg and BTHAGel bio‐clay‐ceramic composites. The regeneration studies proposed that the hybrid composites can be reusable upto five cycles. Hence, the developed bio‐clay‐ceramic hybrid composites were act as best adsorbents for MB removal.

Adsorption of NMST from acetic acid on coconut activated carbon: Kinetics, isotherms and thermodynamics

ABSTRACT Exploration has been made into 2-nitro-4-methylsulfonyltoluene (NMST) adsorption on coconut activated carbon from acetic acid. The results demonstrate that the adsorption of NMST on activated carbon augments with its concentration in acetic acid. NMST adsorption on activated carbon is also improved with temperature. Though NMST adsorption on per gram of carbon will decrease with carbon dosage, more NMST will be adsorbed. The kinetic study depicts that NMST adsorption on activated carbon is in good agreement with the pseudo-second-order kinetic equation. Both of the Langmuir and Freundlich equilibrium isotherm models are well fit for the experimental results, with R2 = 0.9994 and 0.9979, respectively. The adsorption thermodynamic parameters (ΔH, ΔG, ΔS) calculated with Van’t Hoff equations indicate that NMST adsorption on carbon is spontaneous and endothermic.

Surface enriched ternary hybrid via interfacial polymerization as an effective adsorbent for dye removal

Methylene blue (MB) is a carcinogenic pollutant that can negatively affect both human health and marine life. Developing effective adsorbents for MB removal is therefore crucial for ensuring safe human life and mitigating environmental issues. Herein, we present an interfacial polymerization to synthesize polydopamine assisted multi-walled carbon nanotubes stitched graphene oxide (PDA@MWNTs/GO) as an effective adsorbent for MB removal. Stitching the PDA layer interfacially onto MWNTs/GO effectively prevents disintegration, diminishes agglomeration/restacking issues, and maximizes adsorption sites. The inherent catecholamine functionality within the PDA layer significantly enhances hydrophilicity. These distinctive characteristics endowed the PDA@MWNTs/GO composite with exceptional adsorption capacity for the cationic MB. The effects of MB concentration, pH, and temperature on the dye solution were thoroughly investigated. The results of the adsorption isotherm and kinetics analysis revealed conformity with the Langmuir isotherm model and adherence to the pseudo-second-order kinetic model. Moreover, PDA@MWNTs/GO demonstrated removal efficiency, exceeding 90% after three consecutive cycles of reuse. The adsorption mechanism was driven by electrostatic attraction and π–π stacking. The superior adsorption performance, attributable to the diverse functionalities and high removal efficiency, demonstrates the potential of PDA@MWNTs/GO as an efficient adsorbent for MB and can also function for other cationic dye impurities.

Modification of Coal Fly Ash Waste into Manganese-Oxide-Coated-Zeolite (MOCZ) to Adsorb Heavy Metal Ions Ni2+

High consumption of coal as a source of electrical energy in Indonesia has resulted in piles of waste from coal burning, namely fly ash, which can damage the environment and harm health. Fly ash contains main oxides, namely silica (SiO2) and alumina (Al2O3), whose components are similar to zeolite, so they can be synthesized into zeolite-like material (ZLM) which can be used as an adsorbent for heavy metal Ni2+. Therefore, this research discussed the characterization of manganese-oxide-coated-zeolite (MOCZ) from fly ash waste as a heavy metal adsorbent. The research procedure consisted of preparation, purification, and activation stage of fly ash to obtain fly ash that is free from impurities, the stage of making sodium silicate and sodium aluminate, and zeolite synthesis. The resulting zeolite was then coated with manganese oxide to expand the surface area of the zeolite and increase the ability of zeolite to adsorb heavy metal Ni2+. The research results showed that fly ash waste that was coated with manganese oxide can adsorb heavy metal Ni2+. The adsorption of the Ni2+ metal ion solution by zeolite with MOCZ modification is in line with the pseudo-second-order kinetic and Langmuir isotherm.

Melamine-based hyper-cross-linked resin for efficient removal of total petroleum hydrocarbons (C10-C32) from aqueous solutions.

Petroleum hydrocarbons (PHCs) are produced from industrial discharges, storage leakages, accidental spills, and operational failures. The hazardous nature of PHCs causes serious health risks and threatens the entire aquatic habitat. In this research work, the investigation of the removal of total petroleum hydrocarbons (TPHs) from the contaminated water is carried out utilizing a novel hypercross-linked resin, MAICY, which is generated by condensation of commercially available precursors. The chemical structures of MAICY have been examined extensively by FESEM, FT-IR, solid (CP-MAS) 13C-NMR, and TGA. A comprehensive analysis for adsorption parameters of TPHs has been performed, and different models such as Langmuir and Freundlich isotherms have been employed where the Freundlich isotherm was found to be the best fit for removal of THPs (R2= 0.9991). The results revealed that the performance of MAICY for the adsorption of TPHs from contaminated water gives a maximum adsorption capacity (qe) of 146 mg.g-1. The results of various parameters hinted that the contact time (0.25-4 h), the dosage of adsorbent (0.17 g/L), pH (7), and concentration of TPHs (26.5 mg/L) have controlled the overall adsorptive performance. Moreover, the kinetic data of qe(expt.) and qe(calc.) for adsorption of TPHs disclosed the regression values (R2) for pseudo-first order (R2= 0.9921) and pseudo-second order (R2= 0.9891). Additionally, based on CHI factor (X2) error estimations, the data was shown to be more consistent with pseudo-first-order kinetics. Moreover, MAICY demonstrated excellent reusability and recycling properties for up to four consecutive adsorption-desorption cycles.

Coconut shell-derived green synthesised carbon nanotubes for clean-up of crude oil spills

Abstract The global economy has led to an increase in oil transportation and exploitation, posing a threat to aquatic and terrestrial ecosystems. Crude oil spilled water purification is a major challenge worldwide. Researchers are focusing on finding adsorbents that improve oil adsorption capability. In the present study the adsorption of crude oil using synthesized carbon nanotubes (CNTs) prepared from coconut shell was investigated by batch adsorption experiments under varying parameters (adsorbent dosage and contact time) after analytical techniques (UV–vis, FTIR and SEM) confirmed the formation of the CNTs. The morphological modification significantly increased the hydrophobicity of the adsorbent, thus creating a synthesized CNTs with a much better adsorption capacity for crude oil removal having a maximum adsorption capacity of 4855.8 mg/g. The experimental results showed that the percentage of crude oil removal increased with an increase in adsorbent dosage and the contact time respectively. According to the correlation coefficient (R 2 = 0.9801) value obtained from the adsorption isotherm investigations, the isotherms were found to fit the Freundlich isotherm somewhat better than the Langmuir isotherm model, which is consistent with the findings reported in the literature. These findings have made the synthesised CNTs an attractive, useful, and environmentally friendly adsorbent for controlling crude oil spill.

Mitigating water pollution by nitrogen fertilizers through amending ammonium sorption in an acid soil using Calciprill and sodium silicate

Use of nitrogen (N) fertilizers is gaining popularity to meet crop nutrient requirement for sustaining the food security of the increasing global population. However, improper management of N fertilizers in acid soils causes leaching and surface runoff because of excessive rainfalls and poor N retention in the tropics in particular. This results in N pollution in water bodies (also known as eutrophication), which degrades water quality to the detriment of aquatic ecosystems near farms. Thus, there is a need for using inorganic soil amendments such as Calciprill and sodium silicate to improve soil N adsorption because of the alkalinity and ability of these amendments to retain N for mitigating excessive N contamination in water bodies. To this end, this N sorption study was conducted to determine the effects of Calciprill and sodium silicate on ammonium (NH4+) adsorption and desorption in an acid soil (Bekenu series, Typic Paleudults). The soil was co-applied with different rates of Calciprill (80 %, 90 %, and 100 % Ca saturations) and sodium silicate (90, 105, 120, 135, and 150 kg ha−1), followed by the NH4+ adsorption capacity determination through the additions of NH4+ isonormal solutions at the five concentrations (0, 25, 50, 75, and 100 mg L−1) to establish a linear relationship between the amount of NH4+ absorbed (qe) and the amount of NH4+ left in the solution (Ce) after 24 h of equilibration. Apart from the soil only without any amendment (C0S0), there were another two additional treatments where the soil was added with Calciprill (100 % Ca saturation) (C3) and sodium silicate only (150 kg ha−1) (S5) to determine their respectively effects on N sorption. The collected data were fitted to the Langmuir and Freundlich isotherms. Thereafter, NH4+ desorption was determined using the same soil samples added with 2 mol dm−3. Compared with the soil without any amendment (C0S0), the Calcirpill alone (C3) and the combined use of Calciprill and sodium silicate significantly increased NH4+ adsorption at the NH4+ addition of 250 mg L̶1, suggesting that Calciprill is the amendment which dominantly increases NH4+ adsorption and the effects of amendments are more pronounced at the lower soil NH4+ concentration. The results also revealed that the NH4+ adsorption in the soils following the co-application of Calciprill and sodium silicate followed the assumption of Freundlich isotherm. Regardless of the NH4+ concentration used, the effects of Calciprill and sodium silicate on the NH4+ desorption remain unclear, which could be because of the ability of sodium silicate to stabilize the soil structure. This stabilization reaction might have impeded the dissolution of Calciprill and temporarily fixed the absorbed NH4+. These findings suggest that it is possible to use the amendments to amend NH4+ sorption in Bekenu series for mitigating NH4+ leaching and runoff to prevent eutrophication.

Efficient removal of Sunset yellow food dye from aqueous environment using bimetal-organic frameworks encapsulated with chitosan: Synthesis, characterization, adsorption analysis, and optimization

In this work, the adsorbent Sunset yellow (SSY) dye, a hazardous food colorant, was to be removed from aqueous solutions using lanthanum/silver bimetal-organic frameworks (La/Ag-MOF) encapsulated onto chitosan (La/Ag-MOF@CS). According to the findings, La/Ag-MOF@CS is a successful adsorbent for removing SSY dye from water. Numerous tests, such as FT-IR, PXRD, SEM, TEM, XPS, and BET analysis, studies of the material’s characteristics were carried out. A substantial pore volume of 1.683 cm3/g and a high surface area of 842 m2/g were found in the data, suggesting the possibility of a high adsorption capacity. The study of surface charge showed that a positive charge below the point of zero charge (pH 6) and a negative charge above it had an impact on the adsorption behavior. The maximal SSY dye adsorption onto La/Ag-MOF@CS was found to reach 443.53 mg.g−1. Pseudo-second-order kinetic models were used to clarify the reaction’s kinetics, and the Langmuir isotherm model, demonstrated a chemisorption process. The adsorption process utilizing the adsorbent La/Ag-MOF@CS is anticipated to have endothermic and spontaneous nature. The synthetic La/Ag-MOF@CS adsorbent showed exceptional flexibility and cyclability, successfully completing up to eight adsorption–desorption cycles. In order to maximize the adsorption results, the Box-Behnken Design was utilized, demonstrating how La/Ag-MOF@CS may be applied to address real-world wastewater treatment challenges in a sustainable and useful way.

Thiol-ene Click Chemistry Synthesis of L-Cysteine-Grafted Graphene Oxide As a New Corrosion Inhibitor for Q235 Steel in Acidic Environment.

l-cysteine, as an eco-friendly and nontoxic corrosion inhibitor, was directly covalently linked to the carbon/carbon double bonds of the GO flakes by a thiol-ene click reaction to avoid decreasing the number of hydrophilic oxygen-containing polar functionalities. The corrosion inhibition performances of Cys-GO toward Q235 steel (QS) in diluted hydrochloric acid were studied by electrochemical methods. The corrosion was a charge transfer-controlled process, and Cys-GO manifested as a mixed-type corrosion inhibitor. The corrosion inhibition efficiency (η) for QS showed a first-increase-and-then-decrease trend with increasing Cys-GO concentrations. The optimum concentration of Cys-GO was 15 mg L-1, and the according η value was up to 90%. The Cys-GO adsorbed on the QS surface to form a protective barrier was responsible for the efficient corrosion inhibition. Langmuir adsorption isotherm model was fitted well with the experiment data, indicating a monolayer adsorption. Furthermore, the coordinate covalent bonds, π-back-donation effect, and electrostatic attraction were responsible for the Cys-GO adsorption on the QS surface.

Exploring Pore Formation and Gas Sensing Kinetics Using Conjugated Polymer-Small Molecule Blends.

Controlling miscibility between mixture components helps induce spontaneous phase separation into distinct domain sizes, thereby resulting in porous conjugated polymer (CP) films with different pore sizes after selective removal of auxiliary components. The miscibility of the CP mixture can be tailored by blending auxiliary model components designed by reflecting the difference in solubility parameters with the CP. The pore size increases as the difference in solubility parameters between the matrix CP and auxiliary component increases. Electrical properties are not critically damaged even after forming pores in the CP; however, excessive pore formation enables pores to spread to the vicinity of the dielectric layer of CP-based field-effect transistors (FETs), leading to partial loss of the carrier-transporting active channel in the FET. The porous structure is advantageous for not only increasing detection sensitivity but also improving the detection speed when porous CP films are applied to FET-based gas sensors for NO2 detection. The quantitative analysis of the response-recovery trend of the FET sensor using the Langmuir isotherm suggests that the response speed can be improved by more than 2.5 times with a 50-fold increase in NO2 sensitivity compared with pristine CP, which has no pores.

Novel aerogel of aminated MXene composite orange peel biomass for ultra-high capacity of V(V) adsorption

Efficient and selective adsorption of V(V), pentavalent vanadium, from strategic polymetallic shale leaching solutions is crucial for resource utilization. However, the lack of a high-capacity adsorbent poses a significant challenge. Herein, we have successfully developed a novel composite adsorbent material by cross-linking orange peel biomass with aminated MXene, referred to as OPM. The incorporation of aminated MXene enhanced the availability of reactive groups within the material. The unique aerogel structure avoids the accumulation of MXene, thus improving the exposure of active sites. Furthermore, the positively charged surface of OPM enabled efficient adsorption of pentavalent vanadium ions. Experimental results showed that the adsorption of V(V) fitted well with the Langmuir adsorption isotherm model, and its adsorption rate was controlled by the pseudo-second-order kinetic mechanism. Remarkably, OPM exhibited a remarkable maximum adsorption capacity of 748.42 mg/g at pH=4. Even in the presence of interfering anions and cations, OPM maintains a high adsorption capacity for V(V).In the simulated wastewater adsorption experiment, the removal rate of V by the adsorbent exceeded 80 % After five cycles of adsorption, the material retains an adsorption capacity of more than 78 %. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy revealed that the adsorption mechanism of OPM on V(V) is attributed to the fact that OPM is protonated under acidic conditions and has strong electrostatic interactions with pentavalent vanadium anion, in which abundant hydroxyl and carboxyl groups can undergo ion-exchange reactions with vanadium anion. Meanwhile, the amino group reduces V(V) to V(IV) and forms a complex with the oxygen/nitrogen functional group. This study provides theoretical understanding and practical application for the synergistic adsorption of V(V) on aerogels prepared from MXene composite orange peel biomass.

Evaluating SiO2/Al2O3/poly(acrylic acid-co-glycidyl methacrylate) composite as a novel adsorbent for cobalt(II) radionuclides

Abstract A novel SiO2/Al2O3/poly(acrylic acid-co-glycidyl methacrylate), SiO2/Al2O3/P(AA-co-GMA), composite was synthesized and evaluated for its effectiveness in adsorbing Co(II) ions from aqueous solutions. The composite was analyzed using various techniques including FTIR, SEM, TGA, DTA, and XRD. The composite displays a high specific surface area of 17.451 m2/g, exceeding that of the corresponding copolymer, which measures 0.236 m2/g. Batch adsorption experiments were conducted to investigate the factors influencing the adsorption capacity of the composite for Co(II) ions. In the pH experiments, it was found that at a solution pH of 3.4, the P(AA-co-GMA) copolymer alone showed limited capability in adsorbing Co(II) ions, achieving only 3.82 mg/g. However, upon integration of SiO2/Al2O3 into the polymer matrix, the composite exhibited a significantly enhanced adsorption capacity of 103.54 mg/g. The adsorption process followed a pseudo-second-order kinetic model and attained equilibrium within 60 min. The Langmuir isotherm model was found to best describe the adsorption behavior, with a maximum adsorption capacity of 217.86 mg/g. The adsorption of Co(II) was significantly affected by the ionic strength, especially with Al3+ displaying a more pronounced impact on the adsorption of Co(II) ions compared to Na+, Ca2+, and Mg2+. Thermodynamic studies indicate that the adsorption process was spontaneous and endothermic. Overall, the SiO2/Al2O3/P(AA-co-GMA) composite material displayed significant adsorption ability for Co(II) ions, making it a suitable option for further development as an effective adsorbent in water treatment applications.

Development of a novel MIL‐68‐NH2@MCC composite for enhanced and synergistic removal of methylene blue and Sm(III) from an aqueous environment

In this study, a pioneering composite material, MIL‐68‐NH2@MCC, was synthesized by integrating an indium‐based metal–organic framework (MIL‐68‐NH2) with microcrystalline cellulose (MCC), that could be prepared by recycling different natural products of cellulose. The surface characteristics of the novel MIL‐68‐NH2@MCC composite were meticulously examined through X‐ray diffraction (XRD), infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy‐dispersive X‐ray spectroscopy (EDX). Remarkably, MIL‐68‐ NH2@MCC demonstrated significantly improved efficiency in removing methylene blue (MB) dye and Sm(III) ions from aqueous solutions, surpassing the removal capabilities of its individual constituents, MIL‐68‐NH2 and MCC. This superior performance can be attributed to the synergistic interplay between MIL‐68‐ NH2 and MCC. We thoroughly investigated the influence of various parameters, including pH, contact time, initial concentration, and temperature. The experimental adsorption data for both MB and Sm(III) exhibited a good fit with the Langmuir isotherm model. The optimized MIL‐68‐NH2@MCC exhibited remarkable maximum adsorption capacities of 133.8 mg/g for MB and 72.1 mg/g for Sm(III). The adsorption kinetics followed a pseudo‐second‐order model with correlation coefficients of 0.9879 and 0.9875 for MB and Sm(III), respectively. The application of intraparticle diffusion and the Boyd kinetic models demonstrated that the film diffusion is the dominant factor influencing the rate of the adsorption process. The study also examined a possible mechanism for the adsorption of MB and Sm(III) on the optimized MIL‐68‐NH2@MCC surface. Ultimately, the results highlight the originality of our research in terms of the efficacy of the newly developed MIL‐68‐NH2@MCC composite as an eco‐friendly adsorbent. Besides, the developed adsorbent effectively removes MB and Sm(III) from different water solutions while exhibiting outstanding selectivity and reusability.

Amelioration of protective organic layer using acenaphthene-based inhibitor responsible for excellent anti-corrosion performance: Experimental and computational perspectives

Despite the engineering promise offered by the co-existence of organic substances in protecting vulnerable metallic materials from corrosive environments, the interaction and formation mechanisms that induce the development of new materials with improved structural properties remain less understood. This study investigated the corrosion inhibitory properties of two acenaphthene derivatives, acenaphthylene-1,2‑dione (ACP) and 1,2-dihydroacenaphthylen-1-ol (DCP), as inhibitors for N80 steel in a 15 % HCl solution. The anticorrosive effectiveness of ACP and DCP compounds was evaluated through multiple research methods, including weight loss analysis, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), and surface characterization using scanning electron microscopy (SEM). The experimental findings demonstrate that ACP exhibits superior inhibition performance compared to DCP, with an inhibition efficiency of 93.54 % for ACP and 73.12 % for DCP at an optimum concentration of 5 × 10–3 M. EIS data show that the charge transfer resistance increases with higher concentrations of both compounds. PDP results indicate that ACP and DCP act as mixed-type inhibitors without altering the corrosion mechanism. The kinetic parameters of corrosion adsorption follow the Langmuir isotherm, highlighting a competition between physical and chemical interactions. To investigate how the geometric structures resulting from functional groups influence their interaction with the metal surface, theoretical calculations employing density functional theory (DFT), molecular dynamics (MD), and density-functional tight-binding (DFTB) were conducted. These calculations were aimed at gaining insights into the adsorption behavior of ACP and DCP on the metal surface and their interfacial mechanism. The calculations demonstrate that the molecule possessing twin donor atoms along with p-type orbitals of aromatic rings significantly influenced the formation of a protective film with a uniform distribution. This configuration exhibited superior corrosion performance compared to a molecule containing only one hydroxyl group (—OH). Theoretical calculations further suggest that ACP exhibits stronger adsorption ability, with the two oxygen atoms identified as the most reactive sites, indicating their tendency to donate electrons to the iron surface. The robust resonance-stabilized structure of ACP enhances the stability of the molecules, facilitating its interaction and adsorption onto the metal surface compared to the DCP inhibitor. Overall, the superior inhibition performance of ACP is attributed to the close bonding of twin donor fragments within the ACP molecule, forming a more compact adsorbed inhibitor film on the steel surface.

Synthesis of graphene oxide-choline chloride in order to remove phosphate ion from aqueous samples: study of mechanism, isotherm and adsorption kinetics

In this study, a graphene oxide-choline chloride adsorbent was used as a highly efficient and environmentally friendly material for removing phosphate ions from aqueous samples. Graphene oxide was synthesized using the Hummers method and then modified with choline chloride to create the graphene oxide-choline chloride adsorbent. The synthesized adsorbent was characterized using Fourier transform infrared spectrophotometry (FT-IR), Field Effect Scanning Electron Microscopy (FESEM), and Energy-dispersive X-ray spectroscopy (EDX). It was then applied to remove phosphate ions at different pH levels and stirring times. The results of this study showed that the maximum removal efficiency of phosphate ions was achieved at pH 5, with an adsorbent amount of 0.015 g and a stirring time of 30 minutes. Furthermore, it was observed that the adsorption of phosphate ions on the adsorbent surface followed the Langmuir isotherm (monolayer adsorption), with a maximum adsorption capacity of 217.4 mg/g. The examination of absorption kinetics also revealed that the absorption of phosphate ions followed pseudo-second-order kinetics, and an increase in temperature favored the progress of the reaction.

Importance of pyrolysis temperature and particle size on physicochemical and adsorptive properties of urban wood-derived biochar

Physicochemical properties of biochars made from urban wood waste at different pyrolysis temperatures (400-700 °C) and particle sizes (1-2 mm and 63-75 μm) were compared to their ability for heavy metals adsorption at various contact times (30-300 min) and adsorbent dosages (0.1-5 g L-1) in real landfill leachate. The yield, volatile matter, hydrogen and oxygen contents, and functional groups of biochars decreased with increasing pyrolysis temperature; while pH, electrical conductivity, ash, fixed carbon, and specific surface area (SSA) increased. FE-SEM images showed that the creation of pores on the surface of biochars increased significantly with increasing pyrolysis temperature. Moreover, particle size exhibited no significant effect on the properties of biochars (p>0.05), except for the SSA. The SSA of biochars with a particle size of 63-75 μm was significantly higher than that measured in 1-2 mm biochars. The adsorption efficiency of heavy metals from landfill leachate increases with increasing pyrolysis temperature, contact time and adsorbent dosage. Conversely, reducing the particle size increases the adsorption efficiency. The highest adsorption efficiency for Pb, Zn, Ni, Cd, and Mn was obtained as a result of using biochar pyrolyzed at 700 °C with a particle size of 63-75 μm (i.e., BC700/63-75) by 60.39%, 75.01, 64.36, 58.87%, and 71.15%, respectively. Pseudo second-order kinetic and the Langmuir isotherm were recognized as the most appropriate models to describe the adsorption process. The chemical adsorption was identified as the main mechanism for the adsorption of metal ions onto BC700/63-75.

The valorization of Prunus mahaleb shell through acid modification for the sorption of Pb2+ removal from aqueous solution

AbstractThis study aimed to investigate the biosorption performance of acid-modified waste Prunus mahaleb (PMA) shells in the removal of Pb2+ ions from aqueous solutions. Changes in the morphological properties and functional components of PMA biosorbent were characterized using SEM–EDX, FT-IR, BET, and PZC analyses. The effect of various parameters such as initial Pb2+ concentration, pH, PMA dosage, contact time, and temperature on biosorption was investigated using a batch biosorption procedure. The maximum biosorption capacity, determined using the Langmuir isotherm, was calculated to be 119 mg g−1. It was found that the biosorption kinetic mechanism followed pseudo-second-order kinetics and intraparticle diffusion model. According to the determined thermodynamic parameters, the biosorption mechanism was found to be endothermic (ΔH° > 0), spontaneous (ΔS° > 0), and entropy-increasing (ΔG° < 0). The outcomes of the experiment were evaluated in comparison to other sorbents that have been previously commonly used in the literature. It was demonstrated that PMA could be a promising, environmentally friendly, cost-effective, and sustainable potential biosorbent for the removal of Pb2+ ions.

Regio- and chemoselective synthesis of new isoxazolyl-linked benzimidazolones via 1,3-dipolar cycloaddition: Characterization, corrosion studies, density functional theory, and Monte Carlo simulations

In this study, novel compounds, isoxazolyl-benzimidazolone (AE1) and isoxazolinylbenzimidazolone (AE2), were synthesized and characterized using various spectroscopic methods. This involved employing 1,3-dipolar cycloaddition techniques with 2,4,6-trimethoxylbenzonitrile N-oxide and mesitonitrile-oxide in combination with “1-cyclohex-1-en-1-yl-3-propargyl-benzimidazolone” or “1-cyclohex-1-en-1-yl-3-allylbenzimidazolone”. The structural identification of these newly formed cycloadducts was achieved through comprehensive analytical and spectral analyses. The two heterocyclic compounds, AE1 and 2, have been investigated into their corrosion inhibition potential of mild steel (MS) in 1.0 M HCl, utilizing diverse analysis methods such as Potentiodynamic Polarization (PDP), Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray (EDX) techniques. The outcomes revealed significant corrosion inhibition, with AE1 displaying the highest effectiveness (97.2 %), followed closely by AE2 (95.8 %) at 10−4M. The inhibitors were observed to adhere to the MS surface following Langmuir isotherms, and their adsorption and thermodynamic characteristics were thoroughly assessed. Moreover, Density Functional Theory (DFT) and Monte Carlo (MC) simulations corroborated the robust adsorption capability of these organic chemicals on the MS surface.

Magnetic solid phase adsorption of ceftiofur sodium in water by deep eutectic solvent modified banana peel‐MnFe2O4 biochar

AbstractMagnetic solid phase adsorption separation (MSPA) technology is an efficient and convenient separation method, which can simplify the separation step and shorten the separation time. It has wide application value in the purification of antibiotic pollutants in water. In this study, a novel magnetic biochar adsorbent (DES1@MnFe2O4‐BBC) with strong selectivity and high adsorption capacity was synthesized. It was composed of banana peel as the biochar source, Mn/Fe bimetallic oxide as the magnetic source and deep eutectic solvent (DES) as the functional monomer. The physicochemical properties of DES1@MnFe2O4‐BBC were systematically characterized by nitrogen adsorption–desorption, synchronous thermal analyzer, vibrating sample magnetometer, X‐ray diffractometer, X‐ray photoelectron spectroscopy, and field emission electron microscopy. The adsorption conditions were optimized by the single‐factor optimization method. Also, under the optimal adsorption conditions, the maximum adsorption capacity of DES1@MnFe2O4‐BBC for ceftiofur sodium was 75.01 mg·g−1. The test of adsorption thermodynamics and kinetics illustrated that the Langmuir isotherm adsorption model and pseudo‐second‐order kinetic equation were suitable well with the adsorption system established in this article. Adsorbent regeneration cycle experiment revealed that the DES1@MnFe2O4‐BBC was an efficient and reusable adsorbent. In the end, all research proves the novel magnetic adsorbent synthesized in this study can provide a new idea for the removal of antibiotics in water.

Simultaneous super-stable mineralization of Pb2+, Cd2+ and Cu2+ using MIL-101(Fe)@MgFe-LDH

The Pb2+, Cd2+ and Cu2+ co-existing pollution in battery and smelting industries have posed a significant threat to ecosystem and human health. Herein, we reported the fabrication of MIL-101(Fe)@MgFe-LDH successfully using in-situ nucleation and transformation strategy. The MIL-101(Fe)@MgFe-LDH exhibited maximum saturated adsorption capacities of 1408.57, 568.18 and 366.30 mg g−1 towards Pb2+, Cd2+ and Cu2+ in aqueous solution, respectively, and the adsorption data for each of these heavy metals can be well-fitted with pseudo-second-order kinetic and Langmuir isotherm models. Moreover, when MIL-101(Fe)@MgFe-LDH was applied for 300 mg kg−1 of Pb2+, Cd2+ and Cu2+ co-existing soil, the extremely low concentration of 1.24, 6.88 and 1.08 mg kg−1 for Pb2+, Cd2+ and Cu2+ can be reached in 7 days of column leaching experiment. Note that the release of Mg2+ from MIL-101(Fe)@MgFe-LDH was shown to promote pea seedling growth by acting as magnesium fertilizer. Detailed quasi-situ characterization and DFT calculation revealed the mechanism of isomorphic substitution of Mg2+ by Cu2+ accompanied by in-situ conversion to CuFe-LDH, while the formation of CdCO3 and Pb3(CO3)2(OH)2 can be demonstrated. Consequently, simultaneous super-stable mineralization of multiple heavy metals in water and soil can be accomplished.