Laminar Flow Research Articles

Enhancing heat exchanger performance with perforated/non‐perforated flow modulators generating continuous/discontinuous swirl flow: A comprehensive review

AbstractHeat exchangers are crucial in transferring heat and finding applications across various industries. Numerous strategies have been devised to improve and optimize the heat transfer process within these systems. Among these, passive methods have garnered significant attention for their ability to operate without external power consumption. This article examines the recent experimental and computational studies conducted by researchers since 2018 on passive enhancement techniques, especially twisted tape, wire coil, swirl flow generator, and others, to boost the thermal efficiency of heat exchangers and aid designers in adopting passive augmentation methods for compact heat exchangers. Recently, researchers' new class of flow maldistribution devices, referred to as swirl flow devices, has gained attention; which enhances convective heat transfer by introducing swirl into the main flow and disrupting the boundary layer at the tube surface through alterations in surface geometry. Twisted tape inserts are devices that demonstrate better performance in laminar flow compared to turbulent flow. Conversely, other passive techniques like ribs, conical nozzles, and conical rings are generally more effective in turbulent flow than laminar flow. A recent research trend is the utilization of nanofluids in combination with other passive heat transfer enhancement techniques like turbulators, ribs, and twisted tape inserts in heat exchangers, which can reduce exergy losses and improve overall convective heat transfer coefficient and effectiveness of heat exchanger.

Bridging Large Eddy Simulation and Reduced-Order Modeling of Convection-Dominated Flows through Spatial Filtering: Review and Perspectives

Reduced-order models (ROMs) have achieved a lot of success in reducing the computational cost of traditional numerical methods across many disciplines. In fluid dynamics, ROMs have been successful in providing efficient and relatively accurate solutions for the numerical simulation of laminar flows. For convection-dominated (e.g., turbulent) flows, however, standard ROMs generally yield inaccurate results, usually affected by spurious oscillations. Thus, ROMs are usually equipped with numerical stabilization or closure models in order to account for the effect of the discarded modes. The literature on ROM closures and stabilizations is large and growing fast. In this paper, instead of reviewing all the ROM closures and stabilizations, we took a more modest step and focused on one particular type of ROM closure and stabilization that is inspired by large eddy simulation (LES), a classical strategy in computational fluid dynamics (CFD). These ROMs, which we call LES-ROMs, are extremely easy to implement, very efficient, and accurate. Indeed, LES-ROMs are modular and generally require minimal modifications to standard (“legacy”) ROM formulations. Furthermore, the computational overhead of these modifications is minimal. Finally, carefully tuned LES-ROMs can accurately capture the average physical quantities of interest in challenging convection-dominated flows in science and engineering applications. LES-ROMs are constructed by leveraging spatial filtering, which is the same principle used to build classical LES models. This ensures a modeling consistency between LES-ROMs and the approaches that generated the data used to train them. It also “bridges” two distinct research fields (LES and ROMs) that have been disconnected until now. This paper is a review of LES-ROMs, with a particular focus on the LES concepts and models that enable the construction of LES-inspired ROMs and the bridging of LES and reduced-order modeling. This paper starts with a description of a versatile LES strategy called evolve–filter–relax (EFR) that has been successfully used as a full-order method for both incompressible and compressible convection-dominated flows. We present evidence of this success. We then show how the EFR strategy, and spatial filtering in general, can be leveraged to construct LES-ROMs (e.g., EFR-ROM). Several applications of LES-ROMs to the numerical simulation of incompressible and compressible convection-dominated flows are presented. Finally, we draw conclusions and outline several research directions and open questions in LES-ROM development. While we do not claim this review to be comprehensive, we certainly hope it serves as a brief and friendly introduction to this exciting research area, which we believe has a lot of potential in the practical numerical simulation of convection-dominated flows in science, engineering, and medicine.

Influence of chemical reaction on transient natural convective flow in an infinite vertical cylinder packed with porous material

A study of mass and heat transport on fully developed laminar and transient free convective flow in a vertical cylinder containing a porous substance inside it. The Laplace Transform Method (LTM) is used to solve the governing equations with suitable boundary conditions. A compact form solution represented by using Bessel and modified Bessel functions. The numerical results were thoroughly scrutinized using graphs and tables to illustrate the effects of newly discovered fluid characteristics, including time, Grashof, mass Grashof, Schmidt, Prandtl, Darcy numbers, viscosity ratio on the concentration and the velocity profiles. The velocity and concentration profiles progressively increase with varying time values until reaching a steady state. Furthermore, it is found that the velocity profiles are decreased by the Prandtl, Schmidt number, and viscosity ratio. In contrast, the Darcy, Grashof, and mass Grashof numbers exhibit an opposite effect. The rate of mass transport, skin friction, and mass flux are presented in tables. The major finding of the current research is that the viscosity ratio parameter decelerates the skin friction and mass flux. This study has potential applications in innovative fields such as solar energy systems, chemical engineering processes, etc.

Nonmodal stability analysis of Poiseuille flow through a porous medium

We unravel the nonmodal stability of a three-dimensional nonstratified Poiseuille flow in a saturated hyperporous medium constrained by impermeable rigid parallel plates. The primary objective is to broaden the scope of previous studies that conducted modal stability analysis for two-dimensional disturbances. Here, we explore both temporal and spatial transient disturbance energy growths for three-dimensional disturbances when the Reynolds number and porosity of the material are high, based on evolution equations with respect to time and space, respectively. Modal stability analysis reveals that the critical Reynolds number for the onset of shear mode instability increases as porosity increases. Moreover, the Darcy viscous drag term stabilizes shear mode instability, resulting in a delay in the transition from laminar flow to turbulence. In addition, it demonstrates the suppression of three-dimensional shear mode instability as the spanwise wavenumber increases, thereby confirming the statement of Squire’s theorem. By contrast, nonmodal stability analysis discloses that both temporal and spatial transient disturbance energy growths curtail as the effect of the Darcy viscous drag force intensifies. But their maximum values behave like O(Re2) for a fixed porous material, where Re is the Reynolds number. However, for different porous materials, the scalings for both temporal and spatial transient disturbance energy growths are different. Furthermore, increasing porosity also suppresses both temporal and spatial disturbance energy growths. Finally, we observe that temporal transient disturbance energy growth becomes larger for a spanwise perturbation, while spatial transient disturbance energy growth becomes larger for a steady perturbation when angular frequency vanishes. The initial disturbance that excites the largest temporal energy amplification generates two sets of alternating high-speed and low-speed elongated streaks in the streamwise direction.

Similarity solutions of a class of unsteady laminar boundary layer

The study of laminar unsteady boundary layer flows is essential for understanding the transition from laminar to turbulent flow, as well as the origins of turbulence. However, finding solutions to this phenomenon poses significant challenges. In this study, we introduce a novel method that employs a similarity transformation to convert the two-dimensional unsteady laminar boundary layer equations into a single partial differential equation with constant coefficients. By applying this transformation, we successfully derive similarity solutions for flat plate boundary layer flow, expressed in terms of Kummer functions. For convergent boundary layer flow, we derive an approximate analytical solution that includes both shock wave and soliton wave solutions. The superposition of these solutions provides evidence for the existence of solitons or soliton-like coherent structures (SCS) within boundary layers. Additionally, this paper explores two- and three-dimensional laminar flows, as well as three-dimensional turbulent flow equations, revealing that they all incorporate third-order derivatives with respect to spatial coordinates. This finding suggests that all viscous fluid motions have the potential to exhibit solitons/like coherent structures (SCS).

Analytical Analysis of Thermal Conductivity by Laminar Flow Under the Influence of MHD Using Vogel’s Model

Analytical Analysis of Thermal Conductivity by Laminar Flow Under the Influence of MHD Using Vogel’s Model

Scaling Up Perovskite Solar Cell Fabrication: Antisolvent‐Controlled Crystallization of Printed Perovskite Semiconductor

Scaling up perovskite solar cells stands as one of the frontiers in advancing this rapidly growing technology. Yet, controlling perovskite thin‐film crystallization during and post‐printing differs significantly from lab‐scale processes that have yielded record device efficiencies. This study investigates antisolvent treatment for slot‐die‐coated perovskite solar cells using in situ optical spectroscopy and comparing among multiple antisolvents. The antisolvent bath used in slot‐die coating affects the perovskite crystallization and film quality differently when comparing to the established spin‐coating antisolvent treatment process. A novel dynamic antisolvent method, employing either vortex or laminar flow, is developed. It outperforms steady‐bath techniques in generating high‐quality, haze‐free films. Optimization studies identify critical treatment times. Implementing this novel antisolvent treatment leads to a peak average power conversion efficiency of 15.62% and the highest device efficiency of 18.57%, an excellent performance for slot‐die‐coated MAPbI3 devices printed and tested under ambient conditions. The method is validated for an alternative perovskite composition, FA0.9Cs0.1PbI3, and printing technique, blade coating. This research highlights the importance of in situ analysis for enhancing perovskite film quality and introduces scalable approaches for controlling large‐area film crystallization kinetics, driven by the demand for efficient and scalable manufacturing processes in the field of perovskite solar cells.

Early thrombus formation is required for eccentric and heterogeneous neointimal hyperplasia under disturbed flow

BackgroundAnticoagulation and antiplatelet therapy effectively inhibit neointimal hyperplasia (NIH) in both arterial and venous systems but not in arteriovenous fistulae (AVF). The main site of AVF failure is the juxta-anastomotic area that is characterized by disturbed flow compared with laminar flow in the arterial inflow and the venous outflow. ObjectivesWe hypothesized that early thrombus formation is required for eccentric and heterogeneous NIH in the presence of disturbed flow. MethodsNeedle puncture and sutured AVF were created in C57BL/6 mice, in PF4-Cre × mT/mG reporter mice, and in Wistar rats. Human AVF samples were second-stage basilic vein transpositions. The tissues were examined by histology, immunofluorescence, immunohistochemistry, and en face staining. ResultsIn the presence of disturbed flow, both mouse and human AVF showed eccentric and heterogeneous NIH. Maladapted vein wall was characterized by eccentric and heterogeneous neointima that was composed of a different abundance of thrombus and smooth muscle cells. PF4-cre × mT/mG reporter mice AVF showed that green fluorescent protein-labeled platelets deposit on the wall directly facing the fistula exit with endothelial cell loss and continue to accumulate in the presence of disturbed flow. Neither disturbed flow with limited endothelial cell loss nor nondisturbed flow induced heterogeneous neointima in different animal models. ConclusionEarly thrombus contributes to late heterogeneous NIH in the presence of disturbed flow. Disturbed flow, large area of endothelial cell loss, and thrombus formation are critical to form eccentric and heterogeneous NIH. Categorization of adapted or maladapted walls may be helpful for therapy targeting heterogeneous NIH.

A robust three-dimensional numerical model for heat transfer characteristics in sintered–grooved thin flat heat pipes

In the current research, a robust three-dimensional numerical model is developed for thin flat heat pipes (TFHPs) with a hybrid sintered–grooved wick structure. Numerical simulations for laminar incompressible flow in liquid wick and ideal gas incompressible flow in the vapor core are performed to predict temperature, pressure, and velocity profiles. The model utilized non-Darcy transport through a porous wick to determine liquid flow in the liquid-wick section. The mass flow rate of the fluid at the liquid–vapor interface is modeled using kinetic theory. Furthermore, the hybrid wick structure is modeled as an inhomogeneous porous medium. Additionally, this formulation enhances the stability and convergence of the numerical solution and accelerates the solving time. The developed model is validated with experimental data, showing very good agreement with axial wall temperatures, with a maximum error of about 2% in steady-state conditions. The numerical results, including system pressure, wall temperature, mass transfer at the liquid and vapor interface, and velocity magnitude streamlines, are investigated for a comprehensive understanding of the flow physics and performance of the hybrid wick. The results show that, at heat inputs of 5, 10, 20, and 30 W, the thermal efficiency of hybrid wick TFHP is 4.9%, 10.4%, 34.38%, and 23.3%, respectively, greater than that of the grooved wick. The TFHP with a hybrid wick indicates the best thermal efficiency at a heat input of 20 W, with a thermal resistance of 0.95 K/W.

Expression of Concern: Entropy generation of the laminar and mixed flow of alumina/water nanofluid flow in a two-dimensional rectangular enclosure affected by a magnetic field using the lattice Boltzmann method

Expression of Concern: Entropy generation of the laminar and mixed flow of alumina/water nanofluid flow in a two-dimensional rectangular enclosure affected by a magnetic field using the lattice Boltzmann method

Computational study of Newtonian laminar annular horizontal displacement flows with rotating inner cylinder

We computationally study the effects of inner cylinder rotation on the laminar displacement flow of two Newtonian fluids along a horizontal eccentric annulus. This flow arises in primary cementing operations in the oil and gas industry, used to seal wells and prevent leakage. We investigate how the rotational motion of the inner cylinder influences the displacement, affecting the interplay of viscosity and density differences, as well as eccentricity. We first simulate a series of experiments recently performed, in order to validate the computational approach. We then study the effects of the rotating inner cylinder in more detail. The rotation shears the fluid in the narrow annular gap and also drags fluid around the annulus, typically resulting in helical streamlines and a spiral pattern of the concentration. Over short timescales, the rotation tends to increase dispersion, but the redistribution of the fluids around the annulus can then improve the overall displacement, i.e., reducing slumping effects due to buoyancy. We also observe a new patterning instability at the inner cylinder, which was not visible in the previous experiments. This instability arises from destabilization of the wall film of displaced fluid, which forms naturally on the walls of the annular gap. We have studied the dimensional parameter space where this instability occurs. Strong buoyancy can suppress the instability, and a threshold value of dimensionless rotation velocity is required for onset of the instability.

Morphology of laminar rheological flow in polygonal ducts

Morphology of laminar rheological flow in polygonal ducts

INVENTARISASI SERANGAN PENYAKIT BUSUK PELEPAH (Rhizoctonia solani Khun) PADA TANAMAN JAGUNG (Zea mays L.) DI KABUPATEN MAROS

Corn (Zea mays L.) is one of the cereal crops that is included in important food ingredients because it has a carbohydrate source. It is the third major food crop after rice and maize in the world. This study aims to determine the intensity of midrib rot disease (Rhizoctonia solani) on maize (Zea mays L.) in Maros Regency. It was carried out in the Pest and Disease laboratory at the Indonesian Muslim University and the Hasanuddin University Disease Laboratory and in the field carried out in Maros Regency, for 3 months, starting from June to August. The materials used were 70% alcohol, aquades, 200 grams of potatoes, 20 grams of sugar, 20 grams of gelatin, 1 tablet of chloramphenicol and corn plants that were attacked by midrib rot disease in Maros Regency. While the tools used in this study were petri dishes, stationery, stirring rods, measuring instruments, oven, Erlenmeyer glass, laminar air flow, aluminum foil, pan, magnetic hot-plate, microscope, filter paper and camera. This study uses a survey method by direct observation in the field. The fronds infected with midrib rot disease (Rhizoctonia solani) were taken and then taken to the laboratory to identify the fungus Rhizoctonia solani. Based on table 2. it is known that the average intensity of midrib rot disease during four observations where there are five varieties that have a medium category, namely NK 212, NK Perkasa, R7, Bisi 321 and Pertiwi 6, while the other two varieties are in the category light, namely Bisi 959 and Pertiwi 5.

Symmetrical vortices and laminar dust flow induced by an intense electron beam interacting with a strongly coupled dusty plasma

A strongly coupled quasi-two-dimensional dusty plasma confined electrostatically in the plasma sheath of a radio frequency (RF) plasma is irradiated by a collimated and mono-energetic pulsed electron beam (e-beam) with an energy of 13 keV and a high peak current per pulse of 30 mA. A stream of rapidly moving charged dust particles is created inside the dust crystal due to the drag force of the electrons in the e-beam. The dust flow is split into two symmetrical branches when it reaches the boundary of the round dust crystal, each following the limit of the circular confining region. This results in the formation of a double vortex flow pattern with the dust particles being transported along the irradiation direction and then aside, eventually back to the entrance position of the e-beam. The observed flow regime is laminar at all times, with the speed in the central region increasing up to 12 mm s−1 in the first 200 ms and then diminishing gradually to a steady value of about 5–6 mm s−1 during a stress relaxation time period of 360 ms. The vorticity follows a similar trend with peak values −3.8 and 3.8 s−1 and steady state values between −2.5 and 2.5 s−1 in the two symmetrical vortices. Time-resolved particle-image-velocimetry and particle-tracking-velocimetry are used to characterize the flow. Molecular dynamics simulations confirm qualitatively the experimental observations showing dust stream and double vortex formation.

Vitamin D3 formation in milk by UV treatment – Novel insights into a rediscovered process

Vitamin D3 is essential for several functions in the human body and the demand is usually covered by natural reactions in skin with UV radiation delivered by the sun. But living beyond a latitude of 35° can lead to a lack of sufficient exposition to the deciding wavelength. Here, many countries fortify their milk prophylactically with artificial vitamin D3. However, the precursor molecule of vitamin D3 (7-deydrocholesterol) is already naturally located in the milk fat globule membrane. Thus, this study deals with the transformation of the naturally occurring 7-dehydrocholesterol into vitamin D3 through UV treatment of the milk - a mechanism that was observed a century ago only indirectly. Different parameters such as temperature (10 - 50°C), fluid flow regimen (turbulent vs. laminar thin film, i.e., 0.6 mm) and wavelength (254, 280 and 313 nm) were investigated in this study for their efficiencies. The UV dose of each experiment was measured with chemical actinometry delivering the actually applied dose reaching the milk. Thus, the connection between applied UV dose and generated vitamin D3 content in the milk measured quantitively with LC-MS/MS was evaluated here that both were not possible a hundred years ago. The experimental results revealed that temperature generally promotes the vitamin D3 formation at 254 nm. Further, a turbulent flow is not as efficiently treated as a laminar thin film flow that is as narrow as 0.6 mm. As expected from absorbance spectra of the precursor molecule 7-dehydrocholesterol, 280 nm turned out to be the most efficient wavelength, followed by intermediate success through irradiation with 254 nm and almost no effect by 313 nm. Generally, it was shown that vitamin D3 concentration of milk was easily increased by UV treatment with today's technologies and that adjustment of certain physical parameters have a significant effect on the efficiency.

A correlation for U-value for laminar and turbulent flows in concentric tube heat exchangers

This paper introduces a novel empirical correlation designed to predict the overall heat transfer coefficient (U) in concentric tube heat exchangers. The study utilizes a comprehensive dataset of 2700 data points from CFD simulations, examining the impact of critical variables including hot and cold fluid Reynolds numbers (Reh, Rec), Prandtl numbers (Prh, Prc), and heat exchanger dimensions (tube hydraulic diameter Dh, annular space hydraulic diameter Dc, and overall length L). The analysis incorporates a range of fluid combinations in the tube and annular sections – air–air, air–water, water-air, and water–water – across Reynolds number ranges from 1000 to 20000, covering both laminar and turbulent flow regimes. The correlation was developed using the Adam optimizer to minimize the Weighted Mean Squared Error (WMSE), achieving an impressive convergence to an average prediction error of 6.7% compared to actual U values. The model categorizes flow into four distinct categories, each corresponding to a combination of flow patterns in the tube and annular spaces regimes – Laminar–Laminar, Laminar–Turbulent, Turbulent–Laminar, and Turbulent–Turbulent – integrating both hydrodynamic and thermal entry effects to enhance prediction accuracy. Rigorous error analysis revealed a median error of 5.18%, substantially outperforming existing models. Notably, 10% of the predictions deviate by less than 1%, with 90th percentile errors staying below 15%. Parameters were finely tuned through extensive numerical simulations, ensuring accurate application of the correlation across diverse operational conditions. The study concludes by highlighting the model’s potential to significantly enhance the design and efficiency of heat exchangers and proposes future enhancements to further improve its predictive accuracy.

Direct numerical simulation of laminar boundary layer interaction with a wall-mounted circular cylinder at low-Reynolds number

In our current study, we employ direct numerical simulation to investigate the interaction between a laminar boundary layer flow and a wall-mounted circular cylinder with an aspect ratio of 4 and a Reynolds number of 750, based on the cylinder diameter and free-stream velocity. As highlighted in recent works by Morton et al. [Int. J. Heat Fluid Flow 72, 109–122 (2018)] and Crane et al. [J. Fluid Mech. 931, R1 (2022)], understanding of flow at low-Reynolds number around wall-mounted circular cylinders remains limited, motivating our study to contribute to this knowledge gap. Our objectives include exploring flow topology, analyzing first- and second-order statistics to characterize the turbulent wake flow, and investigate turbulent kinetic energy transport budgets to comprehend energy transfer mechanisms behind the cylinder. Our spectral analysis of velocity content reveals a low-frequency peak, consistent with recently published literature. However, we observe certain discrepancies between our findings and those of similar studies conducted at lower Reynolds numbers, particularly regarding the frequency content of the wake region. We employ dynamic mode decomposition to unravel the flow dynamics associated with the highest-amplitude mode. Our results indicate that the low-frequency mode reported in the above-mentioned references primarily correlates with the incoming boundary layer and is prominently evident in the lateral force coefficient, in contrast to scenarios at higher Reynolds numbers.

Numerical study of natural laminar flow based on CRM NLF test

Numerical study of natural laminar flow based on CRM NLF test

Impacts of unsteady MHD hybrid nanofluid over a non-linear stretchable porous sheet with thermal radiation and gyrotatic microorganisms

This study offers a numerical assessment of unsteady laminar flow, heat and mass transfer of conventional hybrid nanofluid considering activation energy which is noticed in chemical processes. Further, non linear radiation and bioconvection flow with first order slip is also accounted. Nanoparticles as Cu and Al2O3 in the base fluid H2O are included in this analysis. Similarity transformation is applied to the governing model equations to reduce dimensionless form and "bvp4c" a MATLAB solver, is applied to get numerical outputs of flow problem. Validation of numerical outcomes is done by an analytical approach optimal auxiliary function method (OAFM). This analysis reports better thermal characteristics when volume fractions 0.0 ≤ φ1 ≤ 0.5 and 0.0 ≤ φ2 ≤ 0.5 of both nanoparticles Cu and Al2O3 are enhanced. Results for present analysis are interpreted numerically and graphically for distinct enhanced values of dimensionless parameters and physical quantities. The high resistance offered by velocity slip (0 ≤ Sv1 ≤ 1.0) and Forchheimer parameter (0 ≤ Fr ≤ 10) cause a drop in velocity profiles. It is noticed that bioconvection Peclet number (0 ≤ Pe ≤ 0.7) leading to a drop (χ(η) = 0.139972 to χ(η) = 0.0817063, at η = 1) in density distribution of motile microorganisms.

Comparative study of two-phase flow approaches for modeling conjugate heat transfer in a three-dimensional wavy microchannel-heat sink with CuO-water nanofluid

This study aims to numerically investigate the conjugate heat transfer (CHT) and the changes in the hydraulic and thermal terms of laminar flow (300 ≤ Re ≤ 800) in a 3-D wavy microchannel heat sink (MCHS). The obtained results from different nanofluid flow simulated models will be compared. The numerical simulation approaches used include single-phase, mixture, Eulerian, DPM, and DDPM. The effect of adding 1%, 3%, and 6% concentration of CuO nanoparticles (100 nm) in deionized water as the base fluid is examined on various parameters such as local and axial temperature, heat transfer convective coefficient, friction factor, Nusselt number (Nu), velocity distribution, and thermal and hydraulic boundary layer parameters. The substrate surface, due to its larger area surface and the amplitude of the sinusoidal wave, has a greater impact on the nanofluid flow as a channel bottom conjugate surface compared to others. The results obtained from the different models show close agreement with each other for various cases. For example, at Re = 304, the average Nu and friction factor for pure water are approximately 10.43 and 0.0260, respectively. For water with 0.01 concentration of CuO nanoparticles, Nu is found to be in the range of 10.43–10.78, and the friction factor ranges from 0.260 to 0.290, depending on the approach used for simulation. This shows a 2% increase in Nusselt number compared to a 0.05% increase in the friction factor. Moreover, these values increase by approximately 5.7% and 11.3% on average with an increase in CuO nanoparticle concentration to 0.06. Additionally, the DPM and DDPM models show a 15% difference in the scattering of CuO nanoparticles compared to the Eulerian-Eulerian models. The single-phase model presented in this study yields similar results to the multiphase approaches. Furthermore, the PEC parameter increases by about 1.9% with the addition of CuO nanoparticles at a concentration of 0.06.