Lactone Groups Research Articles

Adsorption of dibenzofuran by modified biochar derived from microwave gasification: Impact factors and adsorption mechanism

Dioxins, emanating from the waste incineration, constitutes an organic pollutant that poses considerable risks to the human health and environment. In this study, the corn straw char (CSC) and oak char (OC) derived from the electric heating or microwave gasification, and the coconut-shell activated carbon (AC) are employed as absorbents for the adsorption of dibenzofuran (DBF, dioxins model compound). Characterization techniques, including BET, X-ray CT, SEM-EDS, FTIR, and XPS, are performed to identify the DBF adsorption mechanism on the biochar. The results show that the biochar prepared by the microwave gasification has a more well-developed pore structure than that of the electric heating gasification. The higher porosity (16.94 %) and lower mineral content (1.75 %) are responsible for the effective adsorption of DBF onto AC. The adsorption capacity of CSC is proportional to the modified concentration of KOH. It is mainly ascribed to the decrement of carboxyl and lactone groups and the enhancement of alkaline functional groups on the biochar surface, which augments the hydrophobicity and π–π electron donor–acceptor (EDA) interaction. Instead, DBF adsorption capacity on the biochar is adversely affected by the HNO3 modification. For all biochar samples, the corresponding maximum adsorption ratios are AC (87.11 %) > KOH-modified CSC (77.14 %) > unmodified CSC (49.11 %) > unmodified OC (39.70 %) > HNO3-modified CSC (36.09 %). The adsorption mechanisms of DBF on the gasified biochar encompass the pore filling, hydrophobicity, and π–π EDA interaction. A desirable adsorption capacity of DBF on the biochar prepared by the microwave gasification is attainable through augmenting the specific surface area while diminishing the oxygen-containing groups of the surface simultaneously.

Insights into the Adsorption Mechanism of Chlorpyrifos on Activated Carbon Derived from Prickly Pear Seeds Waste: An Experimental and DFT Modeling Study

The removal of chlorpyrifos (CPF) from water was achieved using activated carbon (AC) derived from prickly pear seeds (PPS) wastes, developed through chemical activation with phosphoric acid. Several physico-chemical characterization methods were employed. The determination of surface functions using the Boehm assay indicated that the processed AC predominantly possesses acidic functions. The results obtained from the Boehm assay were corroborated by the pH value of the point of zero charge (pHpzc), which was equal to 2.5. Specific area calculation by the BET (Brunauer Emmett Teller) method revealed a large specific area (SBET) of 1077.66 m2 g⁻1. Adsorption experiments of CPF on AC demonstrated that the pseudo-second order (PSO) model and the Freundlich model were the most suitable for kinetic and isothermal modeling, respectively. The maximum CPF adsorption capacity of the PPS AC was found to be approximately 35 mg g⁻1. A theoretical study employing the density functional theory (DFT) was conducted using the B3LYP/6-311G (d, p) method. The most reliable adsorption energy (Eads) and Gibbs free energy (ΔGads) values between CPF and the functional groups on the AC surface were calculated. Results indicated a strong interaction between the lactone group of AC and CPF (ΔGads = -7.15 kcal mol⁻1, ΔEads = -21.55 kcal mol⁻1) and the hydroxyl group (ΔGads = -6.61 kcal mol⁻1, ΔEads = -20.66 kcal mol⁻1). This study demonstrates that activated carbon possesses significant adsorption power, making it highly effective for depolluting water contaminated by pesticides. The application of the theoretical DFT method enhances the understanding of the adsorption phenomenon of CPF on AC.

Identification of mechanisms and experimental implementation for enhancing the interfacial force between oxygen functionalized waste carbon fibers and polyamide resin

To recycle waste carbon fibers (CFs) and utilize them as a composite material with polyamide–6 (PA–6), the oxidation of the carbon surface is crucial for enhancing its bonding with PA–6 without damaging the waste CFs. However, the most effective oxygen-containing functional group (O–group) was hitherto unknown. In this study, computational simulations demonstrated that incorporating O–groups enhanced the interfacial bonding force via hydrogen bonding between the oxygen of the O–groups and hydrogen (N–H) of PA–6. Among various O–groups, the bonding of lactone groups to PA–6 was energetically most favorable, corroborated by different oxidation treatments such as acid, heat, and plasma. As the reaction time or temperature increased, the amount of O–groups, such as lactones, increased. Regardless of the oxidation treatment type, an increase in the amount of O–groups increased the interfacial force, and this tendency was predominantly observed in lactone groups. However, excessive surface oxidation introduced defects on the surface of CFs, which reduced the interfacial force. The modification of waste CFs by identifying the proposed mechanisms lays the groundwork for synthesizing high-quality waste CF composites.

Effect of Carboxymethyl Cellulose and Polyvinyl Alcohol on the Dispersibility and Chemical Functional Group of Nonwoven Fabrics Composed of Recycled Carbon Fibers.

In this study, recycled carbon fibers (rCFs) recovered from waste carbon composites were used to manufacture wet-laid nonwoven fabrics. The aim was to improve dispersibility by investigating the changes in the dispersibility of carbon fibers (CFs) based on the content of the dispersant carboxymethyl cellulose (CMC) and the binder polyvinyl alcohol (PVA), and the length and basis weight of the CFs. In addition, the chemical property changes and oxygen functional group mechanisms based on the content of the CMC dispersant and PVA binder were investigated. The nonwoven fabrics made with desized CFs exhibited significantly improved dispersibility. For nonwoven fabrics produced with a fixed binder PVA content of 10%, optimal dispersibility was achieved at a dispersant CMC concentration of 0.4%. When the dispersant CMC concentration was fixed at 0.4% and the binder PVA content at 10%, the best dispersibility was observed at a CF length of 3 mm, while the maximum tensile strength was achieved at a fiber length of 6 mm. Dispersibility remained almost consistent across different basis weights. As the dispersant CMC concentration increased from 0.2% to 0.6%, the oxygen functional groups, such as carbonyl group (C=O), lactone group (O=C-O), and natrium hydroxide (NaOH), also increased. However, hydroxyl group (C-O) decreased. Moreover, the contact angle decreased, while the surface free energy increased. On the other hand, when the dispersant CMC concentration was fixed at 0.4%, the optimal binder PVA content was found to be 3%. As the binder PVA content increased from 0% to 10%, the formation of hydrogen bonds between the CMC dispersant and the PVA binder led to an increase in C=O and O=C-O bonds, while C-O and NaOH decreased. As the amount of oxygen increased, the contact angle decreased and the surface free energy increased.

Influence of Tectonically Deformed Coal-Based Activated Carbon and Its Surface Modification on Methane Adsorption.

A series of coal-based activated carbons (CACs) were synthesized from mylonitized fat coal, a type of tectonically deformed coal (TDC) and symbiotic primary structural coal (PSC), followed by oxidative modification. The pore structure, surface oxygen-containing functional groups, and their influence on methane adsorption by CAC as the simplified coal model were investigated by using low-temperature nitrogen adsorption, Fourier transform infrared spectroscopy, Boehm titration, and X-ray photoelectron spectroscopy. The results showed that tectonic deformation fostered smaller pores, particularly ultramicropores in TDC, dominating methane adsorption. Acid-modified TDC-based activated carbons (ACs) showed higher pore parameters and oxygen-containing functional groups than those of PSC-based ACs. Nitric acid introduced abundant carboxyl groups concurrently increasing the pore volume and specific surface area (SSA), while sulfuric acid-ammonium persulfate treatment resulted in increased lactone groups and a partial collapse/blockage of nanopores. Methane adsorption experiments confirmed the importance of micropores and revealed a significant decrease in capacity owing to increased oxygen-containing functional groups as the primary role, with pore wall corrosion playing a secondary role. Thus, the study highlights the surface effects of TDC on methane adsorption and the potential for producing high-performance methane storage materials from China's tectonic coal resources.

Effects of aging processes on spent mushroom Substrate-Derived Biochar: Adsorption characteristics of Cd(II) and Cr(VI)

To explore how chemical, physical and biological process impact the adsorption capacity of biochar for cations and anions, five kinds of spent mushroom substrate biochars including PB (carbonized Auricularia auricula substrate at 600 °C for 6 h), NB (Aged PB at 25 °C and 40 % moisture for 12 mon), AB (PB treated with 20 % mixed acid solution at 70 °C for 6 h), FB (PB subjected to 16 freeze–thaw cycles between − 20 °C and 25 °C) and MB (PB incubated with microbes from contaminated soil for 15 cycles) were prepared under simulated conditions, the internal mechanisms were revealed. Results showed that all aging processes caused a variation in crystal quantity and structure on different biochar. AB, NB and MB had higher hydrophilicity and polarity, and more positive charges than PB. Moreover, AB and MB had a higher cation exchange capacity (CEC) (70.7 and 75.3 cmol/kg) and more oxygen-containing functional groups than PB. MB has the maximum adsorption capacity for Cd(II) (24.2 mg/g), followed by PB (23.5 mg/g), FB (22.7 mg/g), NB (22.2 mg/g), and AB (22.0 mg/g). Langmuir model better described the Cd(II) adsorption onto NB, FB, and PB, while Freundlich better described AB and MB. As for Cr(VI), the maximum adsorption capacity followed the order: MB (24.1 mg/g) > AB (23.7 mg/g) > FB (23.5 mg/g) > PB (23.0 mg/g) > NB (22.7 mg/g). Langmuir model was better for Cr(VI) adsorption onto FB and PB, while Freundlich was better for AB, NB and MB. The pseudo-first-order kinetic model fits for Cd adsorption by FB，while the pseudo-second-order kinetic model fit for the adsorption of Cd and Cr by other biochars. The adsorption of Cr by all biochars was significantly related to the content of lactone group. Acidification and organic acids from microorganisms increased the pHPZC values of AB and MB, which was not conducive to the adsorption of Cd. The surface fragmentation of FB caused by the freezing and thawing process promoted its adsorption of Cd.

Characteristics and mechanism of low-temperature NO adsorption by activated carbon

Activated carbon is widely used to purify flue gas in industries like steel and metallurgy, but its ability to adsorb NOx at medium to low flue gas temperatures is limited. This study conducted adsorption experiments in different atmospheres within −20 to 30 °C. As the temperature decreased from 30 °C to −20 °C, the NOx adsorption amount was increased by 4.61 times. Lowering temperature greatly promoted NOx adsorption. Temperature-programmed desorption experiments determined the amount of NOx adsorbed through physical adsorption and chemical adsorption. As the temperature decreased from 30 °C to −20 °C, the proportion of physically adsorbed NOx to total adsorption amount increased from 2.9 % to 45.5 %, and the proportion of physically adsorbed NO2 to total physical adsorption amount increased from 0 to71.6 %. Lowering the temperature benefited NO oxidation and NO2′s adsorption on activated carbon. Desorption curves of chemically adsorbed NOx indicated that a decrease in temperature does not affect the chemical adsorption pathways of NOx. Physical adsorption of NOx was studied by density functional theory calculations. NO2 has much stronger physical adsorption than NO and can physically adsorb near saturated carbon atoms, carbonyl groups, ether groups, hydroxyl groups, and lactone groups. At low temperatures, NO is first oxidized to NO2 on activated carbon and then NO2 is adsorbed through both physical and chemical pathways. Modifying the surface of activated carbon to increase hydroxyl, ether, and lactone groups can help enhance its performance of low-temperature NOx adsorption.

Hydrochars derived from real organic wastes as carbonaceous precursors of activated carbons for the removal of NO from contaminated gas streams

The improvement of air quality in densely-populated urban regions constitutes an environmental challenge of increasing concern. In this respect, the abatement of NO emissions, primarily emanating from combustion processes associated with motor-vehicles, along with industrial/domestic combustion systems, represents one of the main problems. Here, three hydrochars from diverse organic residues were used as activated carbon precursors for their evaluation in the NO removal in two potential application scenarios. Hydrochars were physically activated at 800 °C with pure-CO2 or diluted-O2. These materials were tested in a lab-scale biofilter at different conditions (NO concentration, temperature, relative humidity, NO-containing gas and carbon particle size) and in a larger-scale biofilter to evaluate the long-term NO removal capacity. Hydrochar-derived carbons present a relatively well-developed micro- and mesoporous structure, with BET areas of up to 421 m2/g, and a variety of oxygen surface functionalities (carboxylic, lactone, carbonyl and quinone groups), especially concerning CO2-activated carbons. These exhibited an excellent behaviour at low NO concentration (5 ppmv) between 25 and 75 °C with removal capacities of ≈97 % and > 82 %, respectively; and still good-performance (≈66 %) in a more concentrated gas (120 ppmv). Whilst, carbons obtained by diluted-O2 activation from the same hydrochars, evidenced a higher removal capacity loss at high NO concentration. The O2 presence in the gas stream was confirmed as a crucial factor in the NO elimination, since both co-adsorb on the carbon surface favouring NO oxidation to NO2. Besides, the humidity in the airstream diminished the NO removal capacity from 0.88 to 0.51 mgNO/gcarbon, but still remained at 0.54 mgNO/gcarbon, when the carbon (in pellet) was operated at larger-scale biofilter in 9-fold longer test under humid air. Therefore, this study highlights the potential of renewable carbons to serve as cost-effective component in urban biofilters, to mitigate NO emissions from exhaust gases in biomass boilers and urban semi-close areas.

Effect of functional groups on the adsorption of urea on activated carbon

The recovery of urea, present in the urine of mammals, has the potential of converting a current wastewater pollutant into an energy source due to its high hydrogen content, in alignment with the waste-to-energy principles. Carbon-based materials enable this approach due to their relatively high urea adsorption capacities. This work reveals that the adsorption of urea from aqueous solutions on activated carbon is a combination of weak van der Waals interactions such hydrogen bonds with the aromatic structure of the pristine carbon surface and also with carboxyl groups on the functionalised carbon, showing no appreciable interaction with hydroxyl or lactone groups. The selective introduction and quantification of different oxygen functional groups on activated carbon reveals their independent effect on the urea adsorption capacity, bringing an end to previous discrepancies in the literature. It also demonstrates that the optimisation of carbon materials must balance the increase of carboxyl groups and the decrease of the surface area associated to functionalisation treatments, providing guidance for future developments of carbon-based materials for circular economy applications.

Computational Study of Lactucine and its Derivatives to Investigate its Anti-cancerous Properties Targeting Apoptosis-inducing Protein

Background: Lactucine is related to the sesquiterpene lactone group of naturally occurring compounds and has a variety of pharmacological effects including anticancer properties found in Chicory, Wormwood, Laurus nobilis, Pyrethrum, Chamomile, etc. Lactucine has an anticancer effect which may induce apoptosis in cancerous cells and protect other cells from getting infected. Objective: In this study, Lactucine and its derivatives were screened, and performed their in silico docking study with the proteins involved in the apoptosis-inducing effect in human leukemia cancer. Methods: The three-dimensional structure of lactucine and its derivatives were retrieved in the SDF format. Active sites of protein structures were determined by Sitemap. LigPrep module was used for geometrical refining of chemical structures of lactucine and its derivatives. The protein preparation wizard of Maestro (Schrodinger) was used for protein preparation. From the receptor-complex structure, the cocrystallized ligands were removed from the active site position of the receptor chain. All ligands were docked using default Glide settings for a grid centered on the ligand and structure. Flexible docking was performed using the extra precision (XP) feature of Glide module. The best docking poses for the lactucine and their derivatives were selected based on their docking score. The ADMET properties of lactucine 15- oxalate have been predicted by admetSAR software. Results: Proteins and ligands three-dimensional structures were retrieved from PDB and Pubchem databases, respectively. All lactucine derivatives suitably docked on the apoptosis-inducing proteins with ample Glide scores Lactucin 15-oxalate interacts with proteins which are responsible for apoptosis with a maximum of six H-bonds. Other types of interactions are also involved, like Pi-cation, Pi-Pi stacking, salt bridges, and halogen bonds. Protein CDK-4 has shown the highest number of H-bond (LYS142 salt bridges), ALA16, VAL14, ASP99, LYS35, TYR17, and ASN145) with the Lactucin 15-oxalate. ADMET properties of lactucin 15-oxalate met with the criteria of being eligible to be a novel drug for the treatment of human leukemia cancer. The Dock score of both the Dasatinib drug and the lactucine-15-oxalate with the apoptosis-inducing protein stipulates that the selected ligand has equitable interaction with the target proteins. Conclusion: In this study, lactucine derivatives were docked with apoptosis-inducing proteins for the prediction of its anticancer effect. Lactucin15-oxalate has shown the highest binding affinity for the CDK-4 target and can be used as a lead compound for cancer treatment. Glide and Dock score for docking of lactucin 15-oxalate with CDK-4, well as the number of hydrogen bonding, is in agreement to use this ligand for study. These in silico results are valuable to proceed with the in vitro and in vivo studies related to the anti-cancer role of lactucin 15-oxalate.

SYNTHESIS OF NEW γ-LACTONE RING DERIVATIVES CONTAINING PYRIDINE AND TRICONDENSED SYSTEMS

Lactone-pyridone rings contain many biologically active molecules of natural and artificial origin. The molecules contained in these two rings, represented by Cerpegine and its derivatives, will also exhibit high biological activity. It is also necessary to take into account that both natural and synthetic multi-substituted lactones have high biological activity. Thus, research in the field of multi-substituted lactones and further transformations are of particular interest. The synthesis of such systems began with the synthesis of a 2-acetylfuranone ring. In the next step, condensation of ethylcyanoacetate with 2-acetylfuranone by Knewenegel produced 3-substituted lactones, which according to the NMP 1H spectroscopy are a mixture of E and Z isomers. Then, when 3-substituted lactones were heated with dimethylformamide dimethylacetal DMFA/DMA, 3-substituted lactones containing a diene fragment in the structure were obtained. Stereoselective attachment E was detected using the NMR 1H spectrum. Then, under the action of the corresponding amine, the intermolecular substitution reactions produce compounds containing a lactone and pyridine group isolated by a σ-bond (serpegenous compound). Due to the proximity of the cyanide group of the pyridine ring and the fourth blight group of the lactone ring, intramolecular cyclization occurs during heating in the alkaline medium to form new tricondensed systems. Thus, an optimal method of synthesis of serpegenous compounds has been developed. These systems are of interest because in their skeleton they have not only a condensed system but also spirocycles. The connections themselves may be a promise for further exploration. For citation: Hakobyan R.M., Kharatyan L.A., Hayotsyan S.S., Attaryan H.S., Melikyan G.S. Synthesis of new γ-lactone ring derivatives containing pyridine and tricondensed systems. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 7. P. 28-40. DOI: 10.6060/ivkkt.20246707.7068.

Evolution of oxygen-containing functional groups on coal char surface during gasification in H2O/CO2

Gasification converts coal into syngas (CO and H2) for downstream utilization. The most important reaction in an autothermal gasifier is the char−H2O/CO2 reaction. The evolution of C(O) complexes on the coal char surface directly determines the pathways and rates of CO and H2 generation. This study mainly used a fixed bed reactor to prepare Zhundong coal char with different reaction levels in H2O and CO2, and its surface carboxyl, lactone, phenolic hydroxyl, and hydroxyl functional groups were systematically analyzed by using Boehm titration, FT-IR, and XPS. The results show that the contents of the four oxygen-containing groups in raw coal are in the order of carboxyl＞lactone＞phenol hydroxyl＞hydroxyl. In H2O gasification, the lactone groups were more susceptible to H2O resulting in a significant increase in carboxyl content at the early stage of the reaction. The hydroxyl, as a very active group in the reaction, and the amount of its generation and consumption was very obvious. The phenolic hydroxyl−the least thermally stable group among these four types of groups, was unable to participate in the inter-transformation between oxygen-containing functional groups during the gasification. During CO2 gasification, the hydroxyl was rapidly consumed at the initial stage of the reaction and then shown a slow growth trend, and the newly generated hydroxyl would continue to undergo dehydrogenation to form new functional groups. At the end of the reaction, the transformation of other oxygen-containing functional groups into more stable carbonyl groups leads to a sudden increase in the content of carboxyl and lactone. In this work, Boehm titration was introduced into the determination of oxygen-containing functional groups on the surface of char during gasification in H2O/CO2.

Synthesis and structural characterization of poly-thiolactones with varied ring sizes and endocyclic functional groups

The synthesis and isolation of new thiolactone species containing endocyclic ether, polyether, and lactone groups were designed using the reaction between diacyl chlorides with organometallic tin compounds as a template for controlled thioester bond formation. Thus, eight polythiolactones, including cyclo and spiro compounds with different ring sizes and functional groups were prepared, namely 1-oxa-4,9-dithiacycloundecane-5,8-dione (1a), 1-oxa-4,10-dithiacyclododecane-5,9-dione (1b), 1,4-dioxa-7,12-dithiacyclotetradecane-8,11-dione (2a), 1,4-dioxa-7,13-dithiacyclopentaecane-8,12-dione (2b), 2,15,19,32-tetraoxa-6,11,23,28-tetrathia-spiro[16.16]tritriacontane 3,7,10,14,20,24,27,31-octaone (3a), 2,16,20,34-tetraoxa-6,12,24,30-tetrathia-spiro[17.17]pentatriacontan-3,7,11,15,21,25,29,33-octaone (3b), 9,12,25,28-tetraoxa-6,15,22,31-tetratia-1(1,4),17(1,4)-diphenylcyclodotriacontane-5,16,21,32-tetraone (2c), and 2,17,21,36-tetraoxo-6,13,25,32-tetrathia-8(1,4)27(1,4)-diphenyl-spiro[18-18]heptatriacontane-3,7,12,16,22,26,31,35-octaone (3c). The structural characteristics of the eight closely related derivatives were determined by examining the impact of ring size and functional groups, through single-crystal X-ray diffraction techniques. The crystal packing of these polythiolactones was found to be mainly governed by weak C-H···O hydrogen bonding and van der Waals interactions, resulting in partially overlapping tubular arrangements. Hirshfeld analysis was performed to investigate the crystal packing and intermolecular interactions. The results of this study show the possibility of forming 3D tubular arrangements using polythiolactones with various endocyclic groups, including both flexible and rigid spacers.

Thermal Characterization of Crosslinked Polymeric Microspheres Bearing Thiol Groups Studied by TG/FTIR/DSC under Non-Oxidative Conditions.

This paper presents the thermal behavior of polymer microspheres based on glycidyl methacrylate (GMA) and crosslinking agents benzene-1,4-diylbis(2-methylprop-2-enoate) (1,4DMB) and trimethylolpropane trimethacrylate (TRIM) before and after functionalization with thioglycolic acid (TGA). The thermal stability of the polymers was determined using thermogravimetric analysis and differential scanning calorimetry under non-oxidizing conditions. The evolved gases were detected by FTIR and NMR spectroscopy, and the chemical structure of solid residues after preheating was assessed by FTIR/ATR spectroscopy. The post-functionalized microspheres showed higher thermal stability (within 270-290 °C) than the initial copolymers (within 240-250 °C). In this paper, examples of decomposition patterns of polymer microspheres before and after functionalization are presented. The decomposition of the initial microspheres starts with the emission of GMA monomers, acrolein, carbon dioxide, and the formation of unsaturated bonds in the solid residue. In the case of functionalized microspheres, degradation involves the transesterification of ester groups with the -SH groups, resulting in the emission of carbonyl sulfide, acrolein and carbon dioxide. Furthermore, lactone groups are created in the solid residue. The degradation of the functionalized copolymers is a complex process due to their crosslinked structure, rendering the identification of all the degradation products unattainable.

Comparison of Acid- and Base-Modified Biochar Derived from Douglas Fir for Removal of Copper (II) from Wastewater

Copper is a non-biodegradable heavy metal, and high levels in water bodies cause serious environmental and health issues. Douglas fir biochar has a higher number of carboxylic, phenolic, and lactonic groups, which provide suitable active sites for copper removal. Douglas fir biochar (BC) was modified using 20% solutions of KOH (KOH/BC), H2SO4, (H2SO4/BC), and Na2CO3 (Na2CO3/BC). All materials were characterized using SEM, SEM-EDS, FTIR, TGA, XRD, BET, and elemental analysis. These modifications were done to compare the activations of those sites by measuring copper removal efficiencies. KOH/BC, H2SO4/BC, and Na2CO3/BC materials gave surface areas of 389.3, 326.7, and 367.9 m2 g−1, respectively, compared with pristine biochar with a surface area of 578.9 m2 g−1. The maximum Langmuir adsorption capacities for Na2CO3/BC, KOH/BC, BC, and H2SO4/BC were 24.79, 18.31, 17.38, and 9.17 mg g−1, respectively. All three modifications gave faster kinetics at 2 mg/L initial copper concentrations (pH 5) compared with pristine BC. The copper removal efficiency was demonstrated in four different spiked real water matrices. The copper removals of all four water matrices were above 90% at 2 mg/L initial concentration with a 2 g/L biochar dosage. The competitive effects of Pb2+, Zn2+, Cd2+, and Mg2+ were studied at equimolar concentrations of Cu2+ and competitive ions for all four materials.

Synergistic effect of oxygen-containing and nitrogen-containing groups on promoting low-temperature denitration over non-metallic carbon-based catalyst

Oxygen-containing and nitrogen-containing groups on the surface of non-metallic carbon-based catalysts have been regarded as active sites for NH3 selective catalytic reduction (NH3-SCR) of nitrogen oxides (NOx) at low temperature. In this study, series of AC-xO-yN catalysts were prepared via grafting oxygen-containing and/or nitrogen-containing groups on active carbon (AC). The activity test results showed that the denitration efficiency of AC-5O-0 N and AC-0O-4 N catalyst were only 20 and 44 % at a temperature of 120 °C and a GHSV of 4500 h−1, respectively, while the activity of the AC-5O-4 N catalysts reached 97 % at the same condition, indicating that the oxygen-containing and nitrogen-containing groups exhibited a superior synergistic effect in facilitating the low-temperature NH3-SCR denitration reaction. Characterization results revealed that the oxygen-containing groups (mainly carboxyl and lactone groups) contribute to NH3 adsorption and activation, while the nitrogen-containing groups (especially pyridine nitrogen groups) could promote NO adsorption and oxidation. The co-existence of oxygen-containing and nitrogen-containing groups can synergistically advance the low-temperature NH3-SCR denitration reaction on the surface of the AC catalyst via a fast SCR route. This work might provide insight into designing and preparing non-metallic carbon-based catalysts with high denitration performance.

Unprecedented glucose production using auto-catalytic hydrothermal hydrolysis of lignocellulosic biomass with no catalyst addition

We propose a novel and simple glucose production method involving autocatalytic hydrothermal hydrolysis of biomass without catalyst additives. This method consists of air-oxidation at a relatively lower temperature than that of the conventional method and subsequent hydrothermal hydrolysis. Japanese cedar (indigestible softwood) was initially air–oxidized by heating at 180–200 °C for 3 h. This induced the decomposition of a small portion of cellulose in the cedar sample, although 93.4 % of cellulose remained at 200 °C. The functional acidic groups (phenol, lactonic, and carboxy groups) specifically increased during the initial air–oxidation. Following this, the acidic groups autocatalytically accelerated hydrothermal cellulose hydrolysis, resulting in a maximum glucose yield of 139.6 mg/g raw material at a severity factor (R0) of 3.2 × 104.

Synthesis, Characterization, and Evaluation of Antioxidant and Physical Properties of New Bifunctional Aromatic Monomers Containing Imine and Heterocyclic Rings in The Main Chain.

New various monomers with di amine functional groups have been synthesized, containing di azomethine or di seven-membered heterocyclic rings in the backbone. A condensation reaction of benzidine with 4-amino benzaldehyde with some drops of glacial acetic acid in ethanol absolute prepared bi-functional amino groups monomer with azomethine core P1(4-[(1E)-[4[4-(E)-(4-aminophenyl)methylidene]amino]phenyl}phenylimino methyl aniline). The next step was the Cycloaddition reaction of P1 with succinic, malic, and phthalic anhydrides used to obtain aromatic heterocyclic monomers with oxazepane and oxazepine rings containing lactone and lactam groups. All the synthesized monomers were characterized spectrally with many techniques (FT.IR,1 H1.NMR, C13-NMR) that were used to investigate the functional groups in the structure of monomers. Monitoring the progress and completion of the reaction was performed using thin-layer chromatography (TLC). Physical characterizations, including detecting the melting point, purity, colour, retardation factor, molecular formula, and molecular weight, the polarized optical microscope (POM) used for Image-based microscopic interpretation of prepared compounds. All the prepared monomers are considered effective antioxidant agents as they give free radicals scavenging over 60%, reaching 80 %; this activity makes them useful in large numbers of industries as they can scavenge the free radicals that the industrial product may be exposed, which increases its shelf life and enhance its effectiveness.

Adsorption of Chromium and Nickel Ions on Commercial Activated Carbon-An Analysis of Adsorption Kinetics and Statics.

The adsorption of nickel Ni(II) and chromium Cr(III) ions on the commercial activated carbons WG-12, F-300 and ROW 08, which differ in their pore structure and the chemical nature of their surfaces, were analyzed. The nickel ions Ni2+ were best adsorbed on the WG-12 activated carbon, which had the largest number of carboxyl and lactone groups on the surface of the activated carbons, and the largest specific surface area. Chromium, occurring in solutions with pH = 6 in the form of Cr(OH)2+ and Cr(OH)2+ cations, was best adsorbed on the ROW 08 Supra activated carbon, which is characterized by the highest values of water extract. The precipitation of chromium hydroxide in the pores of the activated carbon was the mechanism responsible for the high adsorption of Cr(III) on this carbon. For the other sorbents, the amount of carboxyl and lactone groups determined the amount of Cr(III) and Ni(II) adsorption. The adsorption kinetics results were described with PFO, PSO, Elovich and intraparticle diffusion models. The highest correlation coefficients for both the Cr(III) and Ni(II) ions were obtained using the PSO model. Among the seven adsorption isotherm models, very high R2 values were obtained for the Toth, Temkin, Langmuir and Jovanovic models. The Cr(III) ions were removed in slightly larger quantities than the Ni(II) ions. The capacities of the monolayer qm (calculated from the Langmuir isotherm) ranged from 55.85 to 63.48 mg/g for the Cr(III), and from 40.29 to 51.70 mg/g for the Ni(II) ions (pH = 6). The adsorption efficiency of Cr(III) and Ni(II) cations from natural waters with different degrees of mineralization (spring, weakly and moderately mineralized) was only a few percent lower than that from deionized water.

Effect of the Chemical Properties of Silane Coupling Agents on Interfacial Bonding Strength with Thermoplastics in the Resizing of Recycled Carbon Fibers

Upcycling recycled carbon fibers recovered from waste carbon composites can reduce the price of carbon fibers while improving disposal-related environmental problems. This study assessed and characterized recycled carbon fibers subjected to sizing treatment using N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (APS) chemically coordinated with polyamide 6 (PA6) and polypropylene (PP) resins. Sizing treatment with 1 wt.% APS for 10 s yielded O=C-O on the surface of the carbon fiber, and the -SiOH in the APS underwent a dehydration–condensation reaction that converted O=C-O (lactone groups) into bonds of C-O (hydroxyl groups) and C=O (carbonyl groups). The effects of C-O and C=O on the interfacial bonding force increased to a maximum, resulting in an oxygen-to-carbon ratio (O/C) of 0.26. The polar/surface energy ratio showed the highest value of 32.29% at 10 s, and the interfacial bonding force showed the maximum value of 32 MPa at 10 s, which is about 15% better than that of commercial carbon fiber (PA6-based condition). In 10 s resizing treatments with 0.5 wt.% 3-methacryloxypropyltrimethoxysilane (MPS), C-O, C=O, and O=C-O underwent a dehydration–condensation reaction with -SiOH, which broke the bonds between carbon and oxygen and introduced a methacrylate group (H2C=C(CH3)CO2H), resulting in a significant increase in C-O and C=O, with an O/C of 0.51. The polar/surface free energy ratio was about 38% at 10 s, with the interfacial bonding force increasing to 27% compared to commercial carbon fiber (PP-based conditions). MPS exhibited a superior interfacial shear strength improvement, two times higher than that of APS, with excellent coordination with PP resin and commercial carbon fiber, although the interfacial bonding strength of the PP resin was significantly lower.