Laboratory Setting Research Articles

AI Powered Bioinformatics - Expediting Diagnostic Testing: A Survey

Research has demonstrated the positive impact of artificial intelligence and Bioinformatics in the field of clinical diagnosis. The integration of AI methodologies into bioinformatics has opened new avenues for breakthroughs in genomics, proteomics, and personalized medicine. The document emphasizes the role of AI in early disease detection, improving patient outcomes, and enhancing healthcare systems by avoiding the need for expensive and time-consuming operations as illnesses worsen. The methodology section provides insights into the approach utilized, including the review of 30 articles from highly regarded journals about AI and bioinformatics that expedite diagnostic testing in the medical field. using survey to gather information and divide it into sub-sections focusing on diagnostic cancer diseases, COVID-19, and genetic and chronic diseases. The survey gathered 52 responses, and the results revealed significant agreements with the findings in the papers, particularly in the importance of developing novel biosensors and diagnostic tools for rapid and accessible detection of SARS-CoV-2, and the potential of AI in laboratory settings, pharmaceutical industry, and disease diagnosis. Overall, the document provides a comprehensive overview of the transformative role of AI in bioinformatics, emphasizing its potential to revolutionize disease diagnosis, treatment, and public health decision-making, while also addressing the challenges and opportunities associated with the integration of AI technologies in the healthcare industry. The rigorous methodology and alignment of survey results with the research findings validate the significance of AI-powered bioinformatics in expediting diagnostic testing and improving patient safety in healthcare.

Reliable and efficient integration of AI into camera traps for smart wildlife monitoring based on continual learning

In this paper, we comprehensively report on an efficient approach for the integration of artificial intelligence (AI) processing pipelines in camera traps for smart on-site wildlife monitoring. Our work covers hardware, software, and algorithmics. We have built two prototypes of smart camera trap on a maximum bill of materials of 100$. We have also built two datasets, made publicly available, comprising over 17 k images, many of them notably challenging even for humans. Leveraging our broad expertise on embedded systems, specialized software libraries and toolchains, and AI techniques such as transfer learning, explainable AI, and, most importantly, continual learning, we achieve more reliable inference on-site - specifically 10 % higher F1-score - than MegaDetector run off-site on a desktop computer. The paper includes many practical details on system realization and on-site training in addition to a vast set of lab and experimental results.

Enhancing medical anatomy education with the integration of virtual reality into traditional lab settings.

In medical education, traditional anatomy labs have relied heavily on the hands-on dissection of cadavers to teach the complex spatial relationships within the human body. However, the advent of virtual reality (VR) technology offers the potential for significantly enhancing this traditional approach by providing immersive, interactive 3D visualizations that can overcome some of the limitations of physical specimens. This study explores the integration of VR into a traditional gross anatomy lab to enrich the learning experience for medical students. Methods included the deployment of a VR application developed to complement the dissection process, featuring detailed 3D models of human anatomy that students could manipulate and explore digitally. Approximately 60 s-year medical students participated in the lab, where they engaged with both traditional dissection and the VR application. Results indicated that the VR integration not only increased engagement and satisfaction but also improved the students' ability to understand anatomical structures and their spatial relationships. Moreover, feedback from students suggested more efficient learning and retention than with traditional methods alone. We conclude that VR technology can significantly enhance medical anatomy education by providing an adjunct to traditional dissection, potentially replacing certain aspects of physical specimens with digital simulations that offer repeatable, detailed exploration without the associated logistical and ethical constraints.

Advancements in on-site heavy metal detection: Characterizing and sensitive Hg2+ sensing of silver spheroid nanoparticles obtained by laser ablation synthesis in solution

Heavy metal detection in water bodies is crucial to prevent potential harm to the environment, animals and humans. While powerful techniques such as atomic absorption spectrometry exist, they often require extensive sample preparation and are typically confined to laboratory settings. As a result, alternative detection methods such as optical sensors, are under development to provide a simpler, faster, and on-site detection solution. In the present work spheroidal silver nanoparticles (AgNPs) with a mean size of 14.7 ± 0.6 nm were synthesized by laser ablation in a sodium citrate solution. These nanoparticles exhibit a localized surface plasmon resonance (LSPR), which is profoundly dependent on the size, morphology and composition of the nanoparticles and the refractive index of the surrounding media. The detection capabilities of these nanoparticles were assessed by exposing them to various metal ions, revealing a distinctive sensitivity to Hg2+ ions. Notably, this particular ion had a significant impact on the extinction curve of the AgNPs. The impact of synthesis parameters, including sodium citrate and NaCl concentration, as well as pH, on the efficacy of Hg2+ detection was systematically studied. Characterization techniques such as Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM), High-Resolution TEM (HRTEM), and Scanning Transmission Electron Microscopy (STEM) were employed to determine the size, morphology, distribution, crystalline structure, and elemental composition of the AgNPs. The results indicated that AgNPs synthesized through laser ablation in a sodium citrate solution exhibited sensitive detection capabilities for Hg2+ ions, reaching an LOD and LOQ of 0.9355 μM and 2.8350 μM respectively.

Synthesis, Antimicrobial, DNA Interactions, In Vitro Cytotoxicity, and Cell Cycle Analysis Efficiency of Newly Nano‐Sized Cu (II), Ni (II), Co (II), and Zn (II) Thio‐Schiff Base Complexes of 2‐((E)‐((4,5‐Dimethyl‐2‐(((E)‐4‐Methylbenzylidene)Amino)Phenyl)imino)Methyl)‐Benzenethiol

ABSTRACTNano‐sized bivalent metal complexes, specifically [M(L)2] with L = 2‐((E)‐((4,5‐dimethyl‐2‐(((E)‐4‐methylbenzylidene)amino)phenyl)‐imino)methyl)benzenethiol] (C23H22N2S) and M = Cu (II) (C1), Co (II) (C2), Ni (II) (C3), and Zn (II) (C4), underwent synthesis and subsequent characterization. Elemental analyses, infrared, NMR, mass, electronic, magnetic susceptibility, conductivity assessments, and X‐ray diffraction studies were used to assess our bivalent metal complexes. DFT studies were used to study the tautomeric equilibrium of the tridentate thio‐Schiff base ligand (HL), via the DFT\B3LYP method in connection with a 6–311G* correlation consistent basis set. Two tautomers, which are thione and thiol forms, were studied to estimate the predominant one. The metal formed four coordinated with the tridentate N2S donor thio‐Schiff base to form octahedral geometry complexes. The SEM, TEM, XRD, AFM, and EDX of the studied complexes unveiled distinct and strong diffraction peaks, signifying their crystalline nature and providing evidence of their particle sizes being within the nano‐size. The crystal sizes calculated for all complexes were determined to be ranging from 27.73 to 76.39 nm. The interactions between metal complexes and calf thymus DNA, and their potential for mimicking insulin activity, were investigated in a controlled lab setting by measuring their ability to inhibit alpha‐amylase. The antimicrobial potential of thio‐Schiff base ligand (HL) plus complexes (C1–C4) were tested. The viscosity and UV–Vis absorption determinations were utilized to assess the calf thymus DNA (CT‐DNA) interaction with the nano‐sized metal (II) chelates. Our flow cytometry data indicate significant levels of apoptosis and cell cycle arresting in both liver and breast cancer cell lines.

Spatiotemporal dynamics of locomotor decisions in Drosophila melanogaster.

Decision-making in animals often involves choosing actions while navigating the environment, a process markedly different from static decision paradigms commonly studied in laboratory settings. Even in decision-making assays in which animals can freely locomote, decision outcomes are often interpreted as happening at single points in space and single moments in time, a simplification that potentially glosses over important spatiotemporal dynamics. We investigated locomotor decision-making in Drosophila melanogaster in Y-shaped mazes, measuring the extent to which their future choices could be predicted through space and time. We demonstrate that turn-decisions can be reliably predicted from flies' locomotor dynamics, with distinct predictability phases emerging as flies progress through maze regions. We show that these predictability dynamics are not merely the result of maze geometry or wall-following tendencies, but instead reflect the capacity of flies to move in ways that depend on sustained locomotor signatures, suggesting an active, working memory-like process. Additionally, we demonstrate that fly mutants known to have sensory and information-processing deficits exhibit altered spatial predictability patterns, highlighting the role of visual, mechanosensory, and dopaminergic signaling in locomotor decision-making. Finally, highlighting the broad applicability of our analyses, we generalize our findings to other species and tasks. We show that human participants in a virtual Y-maze exhibited similar decision predictability dynamics as flies. This study advances our understanding of decision-making processes, emphasizing the importance of spatial and temporal dynamics of locomotor behavior in the lead-up to discrete choice outcomes.

Cognitive reappraisal and acceptance following acute stress.

Effective regulation of emotions is essential in coping with everyday stressors. Although cognitive reappraisal and acceptance are both commonly employed to downregulate negative emotions, they differ in many aspects. Their effectiveness in real-life situations can also be influenced by prior stress or a person's trait preferences for certain emotion regulation (ER) strategies. In the present study, we compared the effectiveness of both ER strategies in a laboratory setting, while focussing on the effect of stress and trait moderators. Ninety-eight healthy participants aged 18-40 were randomly divided into three groups with instructions to use reappraisal, acceptance, or nothing while viewing distressing pictures from the IAPS database. Half of the participants in each group underwent a laboratory stressor (socially evaluated cold pressor test) 20-30min before the ER task. The effectiveness of ER was measured subjectively on the visual analog scale, and by measuring heart rate, skin conductance, and pupil responses. The data show that cognitive reappraisal lowered subjectively experienced negative emotion, while acceptance did not. These group differences were however not supported by psychophysiological indicators. Secondly, although the laboratory stressor elicited cortisol stress responses in our participants, we did not find any effect on ER. Furthermore, the data has not supported the moderation effect by trait reappraisal and acceptance. The present findings show that deliberate usage of ER strategies when viewing emotionally charged pictures leads to a decrease in experienced emotion. On the other hand, the effects of stress and trait moderators were not supported, therefore they may be smaller and more variable than expected.

Development of tongue strength and endurance measurement device: A pilot study in healthy adults

Background: Safe and efficient swallowing relies on adequate tongue strength and endurance. Thus, tongue strength and endurance assessments are essential for swallowing rehabilitation for individuals with swallowing difficulties due to tongue structure and function abnormalities. These tongue functions can be objectively measured using a standard device. However, in Thailand, assessing tongue strength and endurance using standard devices is not widespread in clinical practice due to the high cost of importing these devices. Objective: This study aimed to develop a precise, accurate, and reliable tongue function measurement device for the clinical assessment of tongue strength and endurance. Materials and methods: This study was divided into three phases: 1) Development of a tongue strength and endurance measurement device in a laboratory setting and administration of a satisfaction questionnaire, 2) Trial of the prototype device with six participants, and 3) Assessment of the test-retest reliability of the developed device and investigation of tongue strength and endurance values with twenty participants. Results: As a result of this development, a novel device for measuring tongue strength and endurance was obtained, which provides measurements in units of newtons (N) and kilopascals (kPa) for strength and seconds (s) for endurance. The device’s development cost was significantly lower compared to imported commercially available devices while maintaining the performance standards for medical measurement devices. This was demonstrated by its accuracy ranging from 96.40% to 100%, high precision with a Coefficient of Variation (% CV) of 0.90% to 4.21%, and moderate to excellent reliability with an Intraclass Correlation Coefficient (ICC) of 0.56 to 0.93. Furthermore, statistically significant differences (p<0.01) were observed between genders, especially in anterior tongue strength. Conclusion: The tongue strength and endurance measurement device developed through this study can be utilized for clinical tongue function assessment, giving patients more access to objective evaluations of tongue strength and endurance at a lower examination cost.

Deep learning approach for detecting tomato flowers and buds in greenhouses on 3P2R gantry robot

In recent years, significant advancements have been made in the field of smart greenhouses, particularly in the application of computer vision and robotics for pollinating flowers. Robotic pollination offers several benefits, including reduced labor requirements and preservation of costly pollen through artificial tomato pollination. However, previous studies have primarily focused on the labeling and detection of tomato flowers alone. Therefore, the objective of this study was to develop a comprehensive methodology for simultaneously labeling, training, and detecting tomato flowers specifically tailored for robotic pollination. To achieve this, transfer learning techniques were employed using well-known models, namely YOLOv5 and the recently introduced YOLOv8, for tomato flower detection. The performance of both models was evaluated using the same image dataset, and a comparison was made based on their Average Precision (AP) scores to determine the superior model. The results indicated that YOLOv8 achieved a higher mean AP (mAP) of 92.6% in tomato flower and bud detection, outperforming YOLOv5 with 91.2%. Notably, YOLOv8 also demonstrated an inference speed of 0.7 ms when considering an image size of 1920×1080\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$1920 \ imes 1080$$\\end{document} pixels resized to 640×640\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$640 \ imes 640$$\\end{document} pixels during detection. The image dataset was acquired during both morning and evening periods to minimize the impact of lighting conditions on the detection model. These findings highlight the potential of YOLOv8 for real-time detection of tomato flowers and buds, enabling further estimation of flower blooming peaks and facilitating robotic pollination. In the context of robotic pollination, the study also focuses on the deployment of the proposed detection model on the 3P2R gantry robot. The study introduces a kinematic model and a modified circuit for the gantry robot. The position-based visual servoing method is employed to approach the detected flower during the pollination process. The effectiveness of the proposed visual servoing approach is validated in both un-clustered and clustered plant environments in the laboratory setting. Additionally, this study provides valuable theoretical and practical insights for specialists in the field of greenhouse systems, particularly in the design of flower detection algorithms using computer vision and its deployment in robotic systems used in greenhouses.

Developing a reference method for indirect measurement of pasture evapotranspiration at sub-meter spatial resolution

To establish an indirect method for estimating and partitioning pasture evapotranspiration, it is vital to develop a direct reference method that aligns with the required temporal and spatial resolution. An evapotranspiration chamber offers an effective solution as it is easy to deploy and operates at an appropriate measurement scale. In this study, we prepared and tested a closed hemispherical chamber for on-site measurements of evaporation and/or transpiration. Advanced data monitoring and logging techniques were integrated to enhance the precision and reliability of direct in-field evapotranspiration measurements. During laboratory testing, vapor accumulation within the chamber was monitored to identify the best representative segment of the vapor accumulation curve. Results indicated that the instrument stabilizes its readings within 5 to 10 s post-deployment in laboratory settings. The subsequent 15 s produce stable readings that best represent actual vapor accumulation. The optimal fan speed, producing an air speed of 5.36 ms−1 at the vicinity of the fan within the chamber, paired with a wire mesh above the vapor-producing surface, yielded the best results. The study established a calibration factor (C) of 1.02 based on the actual water loss and vapor accumulation readings from the sensors at this fan speed. Advanced data analytics were applied to derive the calibration factor and to calculate the values of evapotranspiration from the changing microclimate within the chamber. Direction towards complete automation and the limitations of the chamber in field measurement are provided. The chamber was also tested under field conditions, and the paper examines its practical application and necessary adjustments for field measurements.

Synthesis of Acetaminophen-Based Coumarins as Selective COX-2 Inhibitors: An in vitro-in silico Study.

Acetaminophen, a centrally-acting old analgesic drug, is a weak inhibitor of cyclooxygenase (COX) isoforms with some selectivity toward COX-2. This compound was used in this work as a precursor to create nine acetaminophen based coumarins (ACFs). To satisfy the aim of this work, which states the synthesis of acetaminophen-based coumarins as selective COX-2 inhibitors, the ACFs were subjected to two types of investigation: in vitro and in silico. Given the former type, the ACFs capacity to block COX-1 and COX-2 was investigated in lab settings. On the other hand, the in silico investigation included docking the chemical structures of ACFs into the active sites of these enzymes, predicting their anticipated toxicities, and determining the ADME characteristics. The results of the in vitro study revealed that the synthesized ACFs demonstrated good-to-excellent inhibitory properties against the enzymes under study. Also, these ACFs exhibited a high level of COX-2 selectivity, which improved as the capacity of the aromatic substitute for withdrawing electrons was enhanced. Results of docking were comparable to the in vitro investigation in case of COX-2. On the other hand, the in silico investigations indicated that the synthesized ACFs are safer than their precursor, acetaminophen, with a high potential to consider oral-administrated candidates.

Revolutionizing Bone Regeneration with Grinder-Based Dentin Biomaterial: A Systematic Review.

Bone tissue regeneration is a critical aspect of dental surgery, given the common occurrence of bone resorption leading to alveolar bone defects. The aim of this paper was to conduct a systematic review to provide a comprehensive summary of the evidence regarding the regenerative properties of dentin biomaterial. This systematic review was conducted through comprehensive searches in the PubMed, Scopus, and Web of Science databases, as well as an extensive exploration of the gray literature sources, including WorldCat, The New York Academy of Medicine Library, and Trip Database, following the established PRISMA protocol. Keywords such as tooth, dentin, grinder, and autograft guided the search, with a focus on a standardized procedure involving dentin grinders within laboratory, experimental, and clinical settings. Initially, a pool of 1942 articles was identified with 452 duplicates removed. An additional 1474 articles were excluded for not aligning with the predefined topics, and three more were excluded due to the unavailability of the full text. Ultimately, 13 articles met the strict inclusion criteria and were included in the review. The chemical composition of the dentin particles was similar to natural bone in terms of oxygen, carbon, calcium, phosphorus, sodium, and magnesium content, as well as in terms of the Ca/P ratio. In addition, the dentin also contained amide I and amide II structures, as well as aliphatic and hydroxyl functional groups. The chemically treated dentin was free of microorganisms. The dentin had characteristic tubules that opened after chemical treatment. At the cellular level, dentin released bone morphogenetic protein 2, induced significant cell growth, and stimulated the reorganization of the fibroblast cytoskeleton. Most clinical studies have focused on alveolar bone regeneration. After the transplantation of demineralized dentin particles, studies have observed new bone formation, a reduction in residual bone, and an increase in connective tissue. Clinical reports consistently indicate uncomplicated healing and recovery post-transplantation. However, there is a notable gap in the evidence concerning complication rates, patient-reported outcomes, and the presence of pro-inflammatory factors. In conclusion, dentin biomaterial emerges as a versatile bone substitute, demonstrating high biocompatibility and ease of acquisition. The preservation of its internal structure containing organic matter and growth factors enhances its potential for effective bone regeneration. Particularly, in dental surgery, dentin-derived materials present a promising alternative to traditional autologous bone autografts, offering the potential to reduce patient morbidity and treatment costs.

Enhancing Drug Delivery of Glatiramer Acetate Through in Vitro Development of Controlled-Release Nanoliposomes: Investigating Drug Release Kinetics and Cytotoxic Effects

Background: Multiple sclerosis (MS) damages the myelin sheath covering nerve fibers. This condition affects 400,000 individuals in the United States and 2.5 million people globally, with a higher rate of diagnosis in women aged 20 - 40, with a ratio of 2:1. Liposomes facilitate drug dispersion, making them valuable in biomedicine. They enhance the stability of therapeutic medications, improve cellular and tissue absorption, and increase chemical bioactivity at specific locations. This technique delivers encapsulated compounds with high precision while minimizing negative consequences observed in laboratory settings. Objectives: This study aims to develop an optimal nanoliposome formulation using glatiramer acetate (GA) as the active pharmaceutical ingredient by examining drug release and associated adverse effects to achieve the most effective nanoliposomal system. Methods: The thin layer hydration method was used to prepare nanoliposomes. A comprehensive array of analytical techniques, including FE-SEM, FTIR, XRD, HPLC, and DLS, were employed to examine the physicochemical characteristics of the product. Additionally, the biosafety of the nanoliposomes was assessed using the MTT assay on the 1321N1 human astrocytoma cell line. The release profile of GA from the carrier was studied using the dialysis diffusion method, and the stability of the nanoliposomes was also inspected. Results: The size, Polydispersity Index (PDI), and zeta potential of the nanoliposomes were 91.2 ± 1.3 nm, 0.34 ± 0.03, and -27.3 ± 1.2 mV, respectively. The drug entrapment efficiency (DEE%) in nanoliposomes was approximately 70.2 ± 1.7%. The results from XRD and FTIR revealed no chemical interaction between the drug and carrier, and the nanoliposomes were safe for the cultured cell line. The nanoliposomes were stable under storage conditions and exhibited a sustained release profile. Conclusions: Nanoliposomes, as drug carriers, are known to be a potent drug delivery system due to their numerous advantages. Based on the results, GA-nanoliposomes show promise as a strategy for treating MS patients, pending further in vivo experiments and clinical trials.

Effect of ketone monoester supplementation on elite operators' mountaineering training.

Special Operations Forces (SOF) often conduct operations in physiologically stressful environments such as severe heat, cold, or hypoxia, which can induce decreases in a variety of cognitive abilities. Given the promising empirical demonstration of the efficacy of exogenous ketone monoester (KME) supplementation in attenuating cognitive performance decrease during hypoxia at rest in a laboratory setting, we conducted a real-world, field experiment examining KME's efficacy during high-altitude mountaineering, an austere environment in which US SOF have conducted increasing numbers of operations over the past two decades. Specifically, 34 students and cadre at the US Army 10th Special Forces Group Special Operations Advanced Mountaineering School (SOAMS) participated in a randomized, double-blind, placebo (PLA)-controlled crossover trial (KME vs. PLA) over 2days of tactical mountain operations training. The participants ascended from 7,500 ft in altitude (basecamp) to 12,460 ft on 1 day and 13,627 ft the other day (in randomized order), while performing various training activities inducing high physical and cognitive loads over 8-12h, and consumed six doses of KME or PLA 2-3h apart throughout each training day. While KME increased blood ketone levels and decreased glucose levels, there were no clear indications that the elevated ketone level enhanced physical or cognitive performance. KME also produced a greater incidence of heartburn, nausea, and vomiting. In these elite operators, high-altitude mountaineering had a limited impact on cognitive performance, and KME supplementation did not demonstrate any benefit.

Evaluation of three alternative methods to the plaque reduction neutralizing assay for measuring neutralizing antibodies to dengue virus serotype 2

BackgroundDengue is a global public health challenge which requires accurate diagnostic methods for surveillance and control. The gold standard for detecting dengue neutralizing antibodies (nAbs) is the plaque reduction neutralization test (PRNT), which is both labor-intensive and time-consuming. This study aims to evaluate three alternative approaches, namely, the MTT-based (or (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) microneutralization assay, the xCELLigence real-time cell analysis (RTCA), and the immuno-plaque assay-focus reduction neutralization test (iPA-FRNT).MethodsTwenty-two residual serum samples were tested for DENV-2 nAbs using all four assays at three neutralization endpoints of 50%, 70% and 90% inhibition in virus growth. For each neutralization endpoint, results were compared using linear regression and correlation analyses. Test performance characteristics were further obtained for iPA-FRNT using 38 additional serum samples.ResultsPositive correlation of DENV-2 neutralization titers for the MTT-based microneutralization assay and the PRNT assay was only observed at the neutralization endpoint of 50% (r = 0.690). In contrast, at all three neutralization end points, a linear trend and positive correlation of DENV-2 neutralization titers for the xCELLigence RTCA and the PRNT assays were observed, yielding strong or very strong correlation (r = 0.829 to 0.967). This was similarly observed for the iPA-FRNT assay (r = 0.821 to 0.916), which also offered the added advantage of measuring neutralizing titers to non-plaque forming viruses.ConclusionThe xCELLigence RTCA and iPA-FRNT assays could serve as suitable alternatives to PRNT for dengue serological testing. The decision to adopt these methods may depend on the laboratory setting, and the utility of additional applications offered by these technologies.

Thiel cadaver eye as a training model for sub-Tenon’s blocks: a feasibility study

BackgroundRegional anaesthesia education, especially for ocular procedures, necessitates reliable surgical training models. While cadaveric models offer anatomical fidelity, conventional embalming methods may compromise tissue integrity. We aimed to assess the effectiveness of Thiel cadavers for training in sub-Tenon’s blocks by evaluating ocular tissues and measuring insertion forces.MethodsExperimental design, using twenty eyes from ten Thiel cadaver heads. These cadavers were specifically prepared to test the administration of sub-Tenon’s blocks. The research was conducted in a controlled laboratory setting appropriate for handling cadaveric materials and conducting precise measurements. Each cadaver eye underwent an initial ultrasound examination, and its axial length was noted. An intravitreal injection of heptastarch solution followed, to re-establish the eye’s sphericity. After this volume injection, the axial length and intraocular pressure were measured again. Mock sub-Tenon’s blocks were administered in 2 separate quadrants of the eye, with insertion forces measured using a pressure gauge. These were compared to a data set of insertion forces measured in a series of isolated pig’s eyes on which STBs had been performed. Main outcome measurements were macroscopic assessment of the ocular tissue layers and the insertion forces required for the sub-Tenon’s blocks. In a second set of 10 Thiel cadaver heads, 5 ml of sodium chloride were injected as sub-Tenon’s blocks and the emergence of a periocular “T-sign” ascertained and measured by ultrasound.ResultsFour of twenty eyes (20%) retained near-natural sphericity, with the remaining requiring volume injection to approximate physiological shape and pressure. The conjunctiva and Tenon’s layer were intact, and correct cannula placement was achieved in all cases. In 16 of 20 eyes where T-signs could be measured, the median thickness of the T-sign amounted to 2.72 mm (range 1.34 mm–5.28 mm). The average maximum cannula insertion force was 2.92 Newtons. Insertion forces in intact Thiel cadaver heads were consistently higher than in isolated pig’s eyes (3.6 N vs 2.0 N).ConclusionThese findings suggest that Thiel cadavers are a promising model for training in sub-Tenon’sblocks, despite the challenge of often desiccated and involuted eyes.

Unveiling the Potential of Brazilian Eucalyptus for Transparent Wood Manufacturing via the Kraft Pulping Process as a Future Building Material

The emergence of transparent wood as a viable alternative to traditional glass has sparked considerable interest in recent research endeavors. Despite advancements, challenges persist in the delignification methods and wood species utilized in prior studies. Therefore, this study delves into the potential of Brazilian eucalyptus wood for transparent wood production through the kraft pulping process. Delignification was carried out in a laboratory setting, replicating the kraft process with varying reaction times (15, 30, 45, and 60 min). The resulting delignified wood veneers were impregnated with a pre-polymerized PMMA solution. The study encompassed various analyses, including UV-Vis spectroscopy, colorimetry, SEM, optical microscopy, and mechanical property evaluations. The results revealed intriguing trends in terms of transparency, color changes, microstructural modifications, and mechanical properties as a function of delignification time. This work presents valuable insights into the transformative potential of eucalyptus wood, offering a deeper understanding of the interplay between wood modification and PMMA impregnation.

Effects of High Temperature and High Humidity on the Degree of Ocular Damage Caused by 60 GHz Millimeter Wave Exposure.

Millimeter waves (MMW) are pervasive in society; however, studies on the biological effects of MMW exposure are usually performed in laboratory settings not reflecting global environmental diversity. We investigated the effects of a 6-min exposure to 60 GHz MMW (wavelength, 5.0 mm) at incident power densities of 200 and 300 mW cm-2 in eyes (exposed right eyes vs. unexposed left eyes) under various ambient temperature/relative humidity environments (24 °C/50%, 45 °C/20%, and 45 °C/80%) using an in vivo rabbit model. Correlations were examined with adverse ocular events, including corneal epithelial damage (assessed using fluorescein staining), corneal opacity (evaluated by slit-lamp microscopy), and corneal thickness (measured via optical coherence tomography). Our findings indicate that higher temperatures and humidity tend to exacerbate MMW-induced ocular damage, albeit not significantly in the present study. Further research with a larger sample size is warranted. Incident power density emerged as a factor that was directly linked to the ocular damage threshold. High ambient temperature and humidity tended to exacerbate ocular damage from MMW exposure, although the effect was secondary. Ocular damage in a high-temperature (45 °C), high-humidity (80%) environment was increased to the same extent as that by incident power density increased by approximately 100 mW cm-2 in an ocular damage model in a standard environment (24 °C, 50%). In a high-humidity environment, the internal ocular tissue temperature increased at a high ambient temperature of 45 °C, suggesting that the eyeball may respond differently compared to other tissues.

Repurposing weather modification for cloud research showcased by ice crystal growth.

The representation of cloud processes in models is one of the largest sources of uncertainty in weather forecast and climate projections. While laboratory settings offer controlled conditions for studying cloud processes, they cannot reproduce the full range of conditions and interactions present in natural cloud systems. To bridge this gap, here we leverage weather modification, specifically glaciogenic cloud seeding, to investigate ice growth rates within natural clouds. Seeding experiments were conducted in supercooled stratus clouds (at to C) using an uncrewed aerial vehicle, and the created ice crystals were measured 4-10 min downwind by in situ and ground-based remote sensing instrumentation. We observed substantial variability in ice crystal growth rates within natural clouds, attributed to variations in ice crystal number concentrations and in the supersaturation, which is difficult to reproduce in the laboratory and which implies faster precipitation initiation than previously thought. We found that for the experiments conducted at C, the ice crystal populations grew nearly linearly during the time interval from 6 to 10 min. Our results demonstrate that the targeted use of weather modification techniques can be employed for fundamental cloud research (e.g. ice growth processes, aerosol-cloud interactions), helping to advance cloud microphysics parameterizations and to improve weather forecasts and climate projections.

A modular and flexible open source cell incubator system for mobile and stationary use

Culturing living cells in vitro requires the maintenance of physiological conditions for extended periods of time. Here, we introduce a versatile and affordable incubation system, addressing the limitations of traditional incubation systems. Conventionally, stationary cell incubators maintain constant temperature and gas levels for in vitro cell culturing. Combining such incubators with additional lab equipment proves challenging. The presented platform offers modularity and adaptability, enabling customization to diverse experimental needs. The system includes a main unit with a user-friendly interface as well as an interchangeable incubation chamber. We present two incubation chambers targeting two completely different use cases. The first chamber, named “inkugo” facilitates the transportation of cells for up to two hours without external power and for more than a day without an external CO2 source. The second chamber termed “inkubox” was designed to enable continuous electrophysiological recordings. Recordings from up to four neural cultures growing on high-density microelectrode arrays can be performed in parallel. The system’s unique feature lies in its separability of control and incubation components, allowing one control unit to manage various custom chambers. The design’s simplicity and the use of widely accessible components make the here proposed incubation system replicable for any laboratory. This platform fosters collaboration and experimentation in both decentralized and traditional laboratory settings, making it an invaluable addition to any cell culturing pipeline.