Laboratory Experiments Research Articles

Temperature dependence of mosquitoes: Comparing mechanistic and machine learning approaches.

Mosquito vectors of pathogens (e.g., Aedes, Anopheles, and Culex spp. which transmit dengue, Zika, chikungunya, West Nile, malaria, and others) are of increasing concern for global public health. These vectors are geographically shifting under climate and other anthropogenic changes. As small-bodied ectotherms, mosquitoes are strongly affected by temperature, which causes unimodal responses in mosquito life history traits (e.g., biting rate, adult mortality rate, mosquito development rate, and probability of egg-to-adult survival) that exhibit upper and lower thermal limits and intermediate thermal optima in laboratory studies. However, it remains unknown how mosquito thermal responses measured in laboratory experiments relate to the realized thermal responses of mosquitoes in the field. To address this gap, we leverage thousands of global mosquito occurrences and geospatial satellite data at high spatial resolution to construct machine-learning based species distribution models, from which vector thermal responses are estimated. We apply methods to restrict models to the relevant mosquito activity season and to conduct ecologically plausible spatial background sampling centered around ecoregions for comparison to mosquito occurrence records. We found that thermal minima estimated from laboratory studies were highly correlated with those from the species distributions (r = 0.87). The thermal optima were less strongly correlated (r = 0.69). For most species, we did not detect thermal maxima from their observed distributions so were unable to compare to laboratory-based estimates. The results suggest that laboratory studies have the potential to be highly transportable to predicting lower thermal limits and thermal optima of mosquitoes in the field. At the same time, lab-based models likely capture physiological limits on mosquito persistence at high temperatures that are not apparent from field-based observational studies but may critically determine mosquito responses to climate warming. Our results indicate that lab-based and field-based studies are highly complementary; performing the analyses in concert can help to more comprehensively understand vector response to climate change.

A Study of the Effect of Reinforcement Layers on the Performance of Shallow Footing Under Machine Foundation Loads

This paper exhibits an experimental study the effect of numbers of layers of reinforcement on the behavior of shallow footing under machine foundation. A reinforcement was inserted in to the sandy soil of relative density 50% during the raining techniques with 30*30cm at distance (0.5B, B,2B,3B) in a steel container with dimensions (50*50*55) cm. The test was performed under a machine foundation at frequency 10, 15 HZ. This research aims to find the optimal number of layers of reinforcement with geogrid under the square foundation under the machine foundation. For this purpose, laboratory experiments were conducted. The factors that were studied to find the optimal number of layers of reinforcement include the optimal number of layers of reinforcement, as well as displacement amplitude, velocity, acceleration, and settlement. The results showed at frequency 10 HZ, the optimal number of layers was one layer. The percentage of improvement in displacement, velocity, and settlement was (26%,39% and 75%), while acceleration increased when using one layer. At frequency 15 HZ, the optimal number of layers was four layers. The percentage of improvement in displacement, velocity, and settlement was (34%,44% and 66%). We conclude from this research that the type of reinforcement gave good results in reducing displacement amplitude, velocity, and settlement, but does not give good results in reducing acceleration.

The Effect of Interactivity in Immersive Journalism on Participating In the Media and Through the Media

This study aims to disentangle how exactly immersive journalism (IJ) relates to a spectrum of democratically relevant engaging outcomes. To do so, I consider a potentially engaging dimension of IJ: interactivity and a resulting “sense of agency.” In a pre-registered laboratory experiment ( N = 150), I test the effect of exposure to IJ productions that vary in their range of interactivity on a spectrum of participatory intentions and behaviors. Results indicate that a medium level—but not a high level—of interactivity in IJ enhances participation in, but not participation through, journalism. In addition, presence, rather than agency, facilitates participative intentions.

Development and Experimental Validation of a Heat Transfer Model for Spilled Molten Salt Pools

A spill of radionuclide-bearing molten salt is one of the major postulated events that needs to be analyzed for liquid fluorine salt–cooled high-temperature reactor (FHR) or molten salt reactor licensing purposes. In this postulated event, radioactive source term materials (RSTMs) in the molten salt are discharged from the reactor vessel to the reactor building. The release of RSTMs from the spilled salt pool to the gas space in the reactor building is expected to be controlled by the cooling behavior of the spilled salt, including the growth and shrinkage of the solid crust on the surface of the spilled salt pool. This paper presents a simulation model for spilled salt pool heat transfer and validation efforts. The validation data come from two molten salt spill tests that were performed recently: the PELE2 test by the Rapid Experimental Laboratory of Kairos Power LLC (KP) and the Argonne salt cooling test conducted by Argonne National Laboratory. The former was a large-scale test involving kilograms of molten spilled FLiNaK salt, and the latter was a relatively smaller-scale test targeting various processes associated with a salt spill event. Both tests generated valuable data sets that can be used to assess salt cooling and validate evaluation models. This paper provides a new one-dimensional model that can simulate the cooling process of a spilled salt pool as well as the thermal responses of heat structures, such as the stainless steel liner and the concrete below the salt. The model has been implemented as part of KP-SAM code, which is a branch of the systems code SAM specific to KP FHR. The simulation results of the model are compared with the data of the PELE2 and Argonne tests, and reasonable agreements are observed between the model and test data.

Assessment of groundwater susceptibility to contamination using GIS-based modified DRASTIC model in the Rib watershed, Upper Abay Basin, Ethiopia

ABSTRACT Groundwater is one of the most important sources of freshwater, contributing significantly for drinking and other domestic activities around the world. However, its quality is deteriorating over time due to overexploitation and anthropogenic activities. Rib watershed is located in the Tana basin (Ethiopia), is intensively cultivated and urbanizing area. Therefore, this study attempted to assess groundwater vulnerability to pollution using the GIS-based Modified DRASTIC Model. The modified DRASTIC model was selected due to it incorporates both hydrogeological parameters and anthropogenic factors for assessment. The necessary data were collected from the field, and downloaded from websites and laboratory experiments (No3 -). The results showed that more than 73.24% of the watershed is under medium to high vulnerability. Highly vulnerable areas of the watershed (22.48%) was confined to the Southern parts of the watershed (under built-up and cultivated areas). Based on single parameter sensitivity analysis, its vulnerability was highly influenced by aquifer media (24.1%), net recharge (21.75%), land use/land cover (15.1%), and depth of groundwater table (13.6%). The Modified drastic model was validated based on the observed data of nitrate concentration in groundwater. Based on the observed data of nitrate concentration, high-vulnerable areas were more contaminated than medium and low-vulnerable areas. The modified drastic index has a strong correlation with nitrate concentration with (r = 0.76) and (P < 0.043). Therefore, the result indicated that the area is vulnerable to contamination calling for appropriate groundwater management. Hence, this finding helps to plan and minimize future contamination of groundwater by considering its vulnerability before high-risk activities are allowed.

Hydraulic and mechanical performance of granular sub base and geo-composite drainage layers in flexible pavements: insights from laboratory experiments and field investigations

Hydraulic and mechanical performance of granular sub base and geo-composite drainage layers in flexible pavements: insights from laboratory experiments and field investigations

Long-chain alkyl emulsifiers induced asphalt particle dispersion: Lipophilicity-enhancement effect

The structure of the lipophilic groups within the emulsifiers plays a pivotal role in uniformly dispersing the asphalt particles in the water regarding the storage and thermal stability of emulsified asphalt. This study combines laboratory experiments with molecular dynamics simulations, investigating the influence of alkyl chain length on emulsified asphalt dispersion and behavior at the oil/water interface. The results reveal that long-chain alkyl emulsifiers (C16TAC and C18TAC) present a lipophilicity-enhancement effect. This phenomenon increases the free volume fraction of emulsified asphalt, reducing viscosity and improving the compatibility of emulsion. This results in smaller asphalt particle sizes (D50 = 1.982μm) and more uniform dispersion. Vigorously lipophilic long-chain alkyl promotes emulsifier molecular migration towards the asphalt phase, thickening the oil/water interfacial layer and reducing interfacial tension and energy by more than 90 %. Notely, long-chain alkyl emulsifiers establish strong hydrogen bonds with water molecules, leading to water molecule aggregation into a hydration layer. Laboratory experimental results demonstrate that this lipophilicity-enhancement effect significantly improves the storage and thermal stability of emulsified asphalt. This research recommends long-chain alkyl emulsifiers in developing and designing energy-efficient pavement engineering regarding high-performance emulsified asphalt.

Multistage lithospheric drips control active basin formation within an uplifting orogenic plateau

According to GNSS/INSAR measurements, the Konya Basin in Central Anatolia is undergoing rapid subsidence within an uplifting orogenic plateau. Further, geophysical studies reveal thickened crust under the basin and a fast seismic wave speed anomaly in the underlying mantle, in addition to a localised depression in calculated residual topography (down to 280 m) over the Konya Basin, based on gravity-topography considerations. Using scaled laboratory (analogue) experiments we show that the active formation of the Konya Basin may be accounted for by the descent of a mantle lithospheric drip causing local circular-shaped surface subsidence. We interpret that the Konya Basin is developing through a secondary drip pulse that is contemporaneous with broad plateau uplift caused by a larger-scale lithospheric drip since the Miocene. The research reveals that basin evolution and plateau uplift may be linked in a multistage process of lithospheric removal during episodic development of orogenic systems.

Can we achieve atmospheric chemical environments in the laboratory? An integrated model-measurement approach to chamber SOA studies.

Secondary organic aerosol (SOA), atmospheric particulate matter formed from low-volatility products of volatile organic compound (VOC) oxidation, affects both air quality and climate. Current 3D models, however, cannot reproduce the observed variability in atmospheric organic aerosol. Because many SOA model descriptions are derived from environmental chamber experiments, our ability to represent atmospheric conditions in chambers directly affects our ability to assess the air quality and climate impacts of SOA. Here, we develop an approach that leverages global modeling and detailed mechanisms to design chamber experiments that mimic the atmospheric chemistry of organic peroxy radicals (RO2), a key intermediate in VOC oxidation. Drawing on decades of laboratory experiments, we develop a framework for quantitatively describing RO2 chemistry and show that no previous experimental approaches to studying SOA formation have accessed the relevant atmospheric RO2 fate distribution. We show proof-of-concept experiments that demonstrate how SOA experiments can access a range of atmospheric chemical environments and propose several directions for future studies.

The motive cocktail in altruistic behaviors.

Prosocial motives such as social equality and efficiency are key to altruistic behaviors. However, predicting the range of altruistic behaviors in varying contexts and individuals proves challenging if we limit ourselves to one or two motives. Here we demonstrate the numerous, interdependent motives in altruistic behaviors and the possibility to disentangle them through behavioral experimental data and computational modeling. In one laboratory experiment (N = 157) and one preregistered online replication (N = 1,258), across 100 different situations, we found that both third-party punishment and third-party helping behaviors (that is, an unaffected individual punishes the transgressor or helps the victim) aligned best with a model of seven socioeconomic motives, referred to as a motive cocktail. For instance, the inequality discounting motives imply that individuals, when confronted with costly interventions, behave as if the inequality between others barely exists. The motive cocktail model also provides a unified explanation for the differences in intervention willingness between second parties (victims) and third parties, and between punishment and helping.

Identification of CO Source in Return Airway Corner Based on Oxygen Isotope Method: A Case Study

ABSTRACT The problem of CO exceeding the limit in the return airway corner of low-stage coal seriously affects fire prediction and forecasting as well as the health and safety of operating personnel. Identifying the sources of CO in return airway corner can help in the adoption of targeted measures to reduce the risk of coal spontaneous combustion (CSC). In this paper, a method based on oxygen isotope is proposed to identify the source of CO accumulation in return airway corner. Laboratory experiments (pyrolysis, ambient temperature oxidation [ATO], and crushing) and field tests (CO testing in the goaf and working face) were conducted to study the pattern of CO generation and field distribution and to obtain gas samples. The δ18O relationship between different sources of CO was analyzed by combining the results of18O tests of CO from experiments and in the field. Results show that the coal seam does not contain primary CO. The CO in the return airway corner originates from ATO and crushing of the coal. The coal sample can produce CO quickly during the first stage of oxidation at room temperature and during the crushing process, and it has a good linear relationship with time. The δ18O average of CO in the goaf is 26.41‰, which is close to ATO. The mean value of δ18O of CO in the return airway corner is 24.49‰, which is located between ATO and crushing. The calculated proportions of CO in the return airway corner originating from ATO and crushing were 87% and 13%, respectively. The study’s findings provide fresh perspectives for the prevention and control of CSC.

Informing Immersed Citizens: The Impact of Interactivity on Comprehending News in Immersive Journalism

Immersive journalism has emerged as an innovative journalistic approach promising enhanced attention and understanding through interactive, virtual environments. Previously, this was mostly tested through factual knowledge. However, evaluating immersive audio-visual modalities solely along factual knowledge falls short of considering, firstly, what about and how an immersive experience is remembered and, secondly, the importance of considering the perceptions surrounding information acquisition. Therefore, this study examines how interactivity in immersive journalism affects traditional as well as novel ways of comprehending news, such as episodic memory. In addition, we consider perceptions related to knowledge. We draw on a laboratory experiment (&lt;em&gt;N&lt;/em&gt; = 149) testing the effect of three levels of interactivity provided (no interactivity vs. looking around vs. looking around + control over pace and order of storyline). Results indicate that a higher range of interactivity does not influence factual memory, but leads to an increase in perceived knowledge, thus indicating an illusion of knowledge. Moreover, there is a tendency to formulate more subjective takeaways in the high-interactivity condition, while interactivity did not influence the credibility evaluations. This provides partial empirical support for the credibility paradox of immersive journalism.

Recording of ultra-low frequency electromagnetic emission during loading of a rock sample

The review of publications devoted to the study and features of the registration of electromagnetic emission observed during the loading of samples of rocks, metals, composite materials in laboratory conditions, as well as in areas of disintegration of rock massifs at mining sites is given. Electromagnetic emission observed during the destruction of rock samples in laboratory experiments and field conditions can appear itself not only in the high and low frequency ranges (1000–3·106 Hz and 500–1000 Hz, respectively), but also in the very low and ultra-low frequency (200–500 Hz and 0.01–200.00 Hz, respectively) ranges. However, the overwhelming majority of experimental studies of rock samples under the influence of a destructive load in laboratory conditions are aimed at measuring electromagnetic emission of the high frequency range. An instrumentation and measurement complex is described that allows recording electromagnetic emission in the ultra-low frequency range. The composition of the instrumentation and measurement complex includes magnetic modulation transducers of magnetic induction as magnetic field sensors. The methodology of laboratory experiments on recording electromagnetic signals arising from the influence of an external load on rock samples using an instrumentation and measuring complex is presented. An example of uniaxial loading of a basalt sample is given. When loading the sample under consideration, the amplitude of the electromagnetic emission pulses exceeds the background values of technogenic magnetic noise by two orders of magnitude. The high sensitivity of the magnetic modulation transducer of magnetic induction allows it to be used to register the components of magnetic induction in the process of destruction of rock samples in conditions of interference from technogenic magnetic noise. The results obtained are important for monitoring and forecasting the process of cracking before mining impacts, as well as for studying the geological environment and processes that generate low-frequency electromagnetic emission in the mining areas.

Synergistic approach of GCW-ISTR for enhanced remediation of semi-volatile organic contaminants in groundwater: Modeling and experimental validation

The poor remediation performance of groundwater circulation well (GCW) on semi-volatile organic contaminants (such as aniline) has severely limited its practical application. To address the challenges posed by the low volatility and solubility of these contaminants, an innovative integration of GCW with in-situ thermal remediation (ISTR) was proposed to create a thermal enhanced circulation well (GCW-ISTR) in this study. Laboratory experiments and model simulations were performed to evaluate the heat transfer and enhanced remediation effect by GCW-ISTR. Results demonstrate that the heat transfer process is controlled by the water circulation around GCW-ISTR and is influenced by factors such as aeration flow rate, groundwater velocity and aquifer permeability. Heating area is directly proportional to the seepage velocity of groundwater which can be analyzed by multiplying the water head difference between the upper and lower screens with the aquifer permeability. Therefore, the heat transfer model, based on Darcy's seepage theory and the energy conservation equation, effectively simulates the heat transfer with an error margin of less than 10%. Compared to individual GCW, GCW-ISTR exhibits a 25.8% improvement in aniline remediation efficiency, resulting in a decrease in the average concentration from 97.95 mg/L to 0.168 mg/L within 48 h, effectively mitigating the occurrence of tailing phenomena. This study provides a feasible method of enhancing the remediation of GCW on semi-volatile contaminants and is anticipated to broaden the applicability of GCW in site application.

Effect of open-area ratios on wave attenuation over a submerged reef breakwater: An experimental study

The reef-type submerged breakwater (RSB) has been implemented around the world to provide coastal protection and natural shelter and habitat for marine species at the same time. A series of laboratory experiments are conducted in a wave flume to study wave propagation and transmission over RSBs with the four open-area ratios of 0.047, 0.131, 0.257, and 0.560. The experimental results demonstrate that the RSB significantly alters the wave propagation characteristics. The RSBs with the open-area ratio of 0.047 and 0.131 reduce the wave height to ∼70%. The RSBs with the open-area ratio of 0.047 and 0.131 perform better in attenuating than those with the open-area ratio of 0.257, and 0.560. As the open-area ratio decreases, the transmission coefficient decreases, while the dissipation coefficient increases. An empirical formula is proposed to calculate the wave transmission coefficient as a function of the RSB open-area ratio and wave steepness under regular waves. A cubic empirical formula with one unknown is also proposed to relate the distance from RSB stoss face to wave breaking point and the open-area ratio. The present study is expected to optimize RSB design for coastal protection.

Methodological assessment for efficient collection of Schistosoma mansoni environmental DNA and improved schistosomiasis surveillance in tropical wetlands

Schistosomiasis, caused by trematodes of genus Schistosoma, is among the most seriously neglected tropical diseases. Although rapid surveillance of risk areas for Schistosoma transmission is vital to control schistosomiasis, the habitat and infection status of this parasite are difficult to assess. Environmental DNA (eDNA) analysis, involving the detection of extra-organismal DNA in water samples, facilitates cost-efficient and sensitive biomonitoring of aquatic environments and is a promising tool to identify Schistosoma habitat and infection risk areas. However, in tropical wetlands, highly turbid water causes filter clogging, thereby decreasing the filtration volume and increasing the risk of false negatives. Therefore, in this study, we aimed to conduct laboratory experiments and field surveys in Lake Victoria, Mbita, to determine the appropriate filter pore size for S. mansoni eDNA collection in terms of particle size and filtration volume. In the laboratory experiment, aquarium water was sequentially filtered using different pore size filters. Targeting >3 µm size fraction was found to be sufficient to capture S. mansoni eDNA particles, regardless of their life cycle stage (egg, miracidia, and cercaria). In the field surveys, GF/D (2.7 µm nominal pore size) filter yielded 2.5-times the filtration volume obtained with a smaller pore size filter and pre-filtration methods under the same time constraints. Moreover, a site-occupancy model was applied to the field detection results to estimate S. mansoni eDNA occurrence and detection probabilities and assess the number of water samples and PCR replicates necessary for efficient eDNA detection. Overall, this study reveals an effective method for S. mansoni eDNA detection in turbid water, facilitating the rapid and sensitive monitoring of its distribution and cost-effective identification of schistosomiasis transmission risk areas.

Combined PCL instabilities cannot be identified using posterior stress radiographs in external or internal rotation: A cadaveric study.

Posterior stress radiography is recommended to identify isolated or combined posterior cruciate ligament (PCL) deficiencies. The posterior drawer in internal (IR) or external rotation (ER) helps to differentiate between these combined instabilities. The purpose of this study was to evaluate posterior stress radiography (PSR) in isolated and combined PCL deficiency with IR and ER compared to PSR in neutral rotation (NR) for diagnosing combined PCL instabilities. Six paired fresh-frozen human cadaveric legs (n = 12) were mounted in a Telos device for PSR. The tibia was rotated using an attached foot apparatus capable of rotating the foot 30° internally and externally. A posterior tibial load of 15 kp (147.1 N) was applied to the tibial tubercle at 90° knee flexion, and a lateral radiograph was obtained. This was repeated with the foot in 30° IR and ER. The PCL, posterolateral complex (PLC), and posteromedial complex (PMC) were sectioned in six knees, while the PMC was sectioned before the PLC in the other six knees. Posterior tibial displacement (PTD) was measured radiographically. Statistical analysis was performed using a two-way ANOVA and a mixed model with Bonferroni correction, and the significance was set at p < 0.05. Furthermore, intra- and interobserver reliability was determined. Cutting the PCL significantly increased the radiographic PTD by 9.8 ± 1.8 mm (side-to-side difference compared to the intact state of the knee, n = 12; p < 0.001). This further increased to 12.2 ± 2.3 mm (n = 6; p < 0.01) with an additional PLC deficiency and to 15.4 ± 3.4 mm (n = 6; p < 0.05) with an additional PMC deficiency. A combined PLC and PMC deficiency resulted in an increase of the PTD to 15.9 ± 4.5 mm (n = 12; p < 0.01). In the PCL/PLC deficient state, ER did not demonstrate a higher PTD, compared to the NR and IR posterior drawer. In the PCL/PMC deficient state in IR, PTD was 1.6 ± 0.7 mm (p < 0.01) higher compared to NR and 3.2 ± 1.9 mm (p < 0.05) higher compared to ER. We showed excellent intra- and interobserver reliability (0.987-0.997). Combined PCL instabilities resulted in a significant increase in posterior tibial displacement in posterior stress radiographs. However, PSR in IR or ER was unable to differentiate between these combined instabilities. Based on our data, additional stress radiographs in rotation are unlikely to provide any diagnostic benefit in the clinical setting. There is no level of evidence as this study was an experimental laboratory study.

Investigating Flow around Submerged I, L and T Head Groynes in Gravel Bed

Riverbank erosion poses a significant threat to the stability and integrity of river training structures. River training structures such as groynes are important components of sustainable development as they play a crucial role in mitigating flood risks, controlling erosion, and supporting the habitat for aquatic organisms. The habitats vary largely according to the groyne type. A comprehensive comparative analysis of the flow field around the I, L, and T head groynes in the gravel bed is drawn. This study will be of immense use for riverbank protection in hilly terrain where streams are mostly dominated by the gravel bed. Laboratory experiments were conducted in a channel with a sediment bed as gravel of size 9.36 mm. Consistent flow conditions were maintained, with a flow depth (D) of 0.136 m and Froude no (Fr) of 0.61. The performance of these groynes, quantified using Lp (length of bank protection), was investigated. LHG and THG, notably, instigate more profound scour depths, recording values of 0.295 D and 0.29 D, respectively, while IHG trails with the value of 0.21 D. The complex flow field involving velocity peaks, decelerated, and negative flow is discussed and is attributed to flow separation at the groyne tip and the horseshoe vortex. The Lp for each groyne was estimated, with the IHG providing the maximum bank protection of 1.2 L1, L1 being the transverse length of the groyne. The cost–benefit analysis revealed IHG as the most cost-effective structure. These findings contribute to optimization of riverbank stabilization efforts, enhancing the resilience of hydraulic infrastructure and ensuring the safety and wellbeing of affected communities and ecosystems. The results also provide valuable insight into bank protection by various groynes and highlight their contribution to enhancing the resilience of river systems.

Trust and Delegated Investing: A Money Doctors Experiment

Abstract The more trust investors place in a money manager, the more confident they are to take risk (Gennaioli, Shleifer, and Vishny 2015). We test this theory in a laboratory experiment using the amount returned from a trust game as measure of trustworthiness. Investors increase the share invested risky with high-cost money managers compared to those with low costs when the highcost money managers are more trustworthy than the low-cost ones. The willingness to take more risk with high-cost money managers is increasing in the difference in trustworthiness. Up to a third of the difference in trustworthiness translates into an increasing risky share. Vice versa, investors are willing to accept higher costs for investments made through more trustworthy money managers. Our findings are robust to alternative explanations, demonstrating that the riskaversion channel can be sufficient for trust to influence behavior.

An experimental study of a quasi-impulsive backwards wave force associated with the secondary load cycle on a vertical cylinder

Steep wave breaking on a vertical cylinder (a typical foundation supporting offshore wind turbines) will induce slam loads. Many questions on the important violent wave loading and the associated secondary load cycle remain unanswered. We use laboratory experiments with unidirectional waves to investigate the fluid loading on vertical cylinders. We use a novel three-phase decomposition approach that allows us to separate different types of nonlinearity. Our findings reveal the existence of an additional quasi-impulsive loading component that is associated with the secondary load cycle and occurs in the backwards direction against that of the incoming waves. This quasi-impulsive force occurs at the end of the secondary load cycle and close to the passage of the downward zero-crossing point of the undisturbed wave. Wavelet analysis showed that the impulsive force exhibits superficially similar behaviour to a typical wave-slamming event but in the reverse direction. To monitor the scattered wave field and extract run-up on the cylinder, we installed a four-camera synchronised video system and found a strong temporal correlation between the arrival time of the Type-II scattered wave onto the cylinder and the occurrence of this quasi-impulsive force. The temporal characteristics of this quasi-impulsive force can be approximated by the Goda wave impact model, taking the collision of the Type-II scattered waves at the rear stagnation point as the impact source.