Knee Joint Moments Research Articles

Effects of Unilateral Lower-extremity Joint Cooling on Movement Biomechanics during Two-legged Jumping and Landing

OBJECTIVES This study examined the immediate effect of unilateral ankle or knee joint cooling on the low-erextremity kinematics and kinetics during two-legged jumping and landing.METHODS Twenty healthy adults randomly completed three data collection sessions for ankle or knee joint cooling, or control. For each session, participants performed two-legged countermovement jumps and lands. For joint cooling, two ice bags were directly placed to the right side and secured with a compression bandage. A three-dimensional motion analysis system (200 Hz) with two floor-embedded force platforms (2000 Hz) was employed to capture the jumping and landing. The cooling effects on kinematical (flight time, and sagittal plane joint angles) and kinetical (peak vertical ground reaction force (vGRF), impulse, and sagittal plane joint moments) variables were examined. A mixed-model analysis of variance was performed for each dependent variable (<i>p</i>≤0.0001 for all tests).RESULTS We did not observe any interactions (flight time: F<sub>2,95</sub>=0.67, <i>p</i>=0.52; joint angles: F<sub>2,209</sub>≤2.26, <i>p</i>≥0.10; peak vGRF: F<sub>2,209</sub>≤1.76, <i>p</i>≥0.20; impulse: F<sub>2,209</sub>≤2.54, <i>p</i>≥0.10; joint moments: F<sub>2,209</sub>≤4.80, <i>p</i>≥0.01 for all interactions). Regardless of condition and time (side effect), subjects showed a dominant-leg predominant movement strategy. Specifically, the right side showed a greater peak vGRF (2%), and greater ankle (7%), knee (6%), and hip (11%) joint moments, as compared with the left side during jumping. The same movement pattern was observed during landing that there was greater peak vGRF (11%) and impulse (8%), and greater ankle and knee joint moments (15%). Regardless of time and side (condition effect), subjects with ankle joint cooling showed 5% lesser ankle joint moment during jumping, compared with those who received knee joint cooling (<i>p</i>=0.0001).CONCLUSIONS A 20-min of unilateral ankle or knee joint cooling seems to neither alter vertical jump height nor change movement biomechanics during two-legged jumping and landing.

Research on Knee Joint Load and Influencing Factors of Typical Tai Chi Movements.

Background Tai chi is recognized worldwide for its rehabilitation abilities and healthcare benefits. However, in recent years, some movements associated with tai chi have been shown to damage the lower limb joints. The purpose of this study was to investigate and compare the effects of different movements, postures, center of mass (COM) movements, and range of knee movement of tai chi exercises on knee joint load. Methods Fourteen professional tai chi practitioners in two postures (high and low) were enrolled to perform the following four typical tai chi movements: wild horse's mane (WHM), repulse monkey (RM), wave-hand in cloud (WHIC), and grasp the bird's tail (GBT). Kinematic and kinetics data were synchronously collected using the Vicon infrared high-speed motion capture system and a three-dimensional (3D) force measurement platform. Variance analysis and partial correlation analysis were performed to investigate factors influencing peak knee joint moment and vertical ground reaction force (VGRF). Results The results showed that the peak knee extension and abduction moment were larger in WHM and RM than those in WHIC and GBT (p < 0.05). WHM was associated with greater rotation moment than the other typical movements (p < 0.05). VGRF and joint moment among different poses were significantly different. Low-pose tai chi typical movements were associated with greater VGRF, knee joint extension and abduction, and rotation moments than high-pose movements (p < 0.05). The anteroposterior and mediolateral COM displacements were strongly and positively associated with VGRF (p < 0.001), while the mediolateral COM displacement was negatively associated with knee extension moment (p < 0.001). The knee internal-external rotation ROM and anteroposterior and mediolateral COM displacements were positively associated with knee abduction moment (p < 0.01). Conclusion For long-term tai chi exercises, choosing a suitable posture based on an individual exercise level and reasonable control of knee ROM and COM displacement can reduce the risk of knee injury during exercise.

Knee biomechanical factors associated with patellofemoral pain in recreational runners

BackgroundPatellofemoral pain (PFP) is a common injury among runners. Knee biomechanical factors associated with PFP, however, remain unclear. The purpose of this study was to determine possible associations between knee biomechanics and symptoms of PFP in recreational runners. MethodsFifteen male and 15 female recreational runners with PFP were enrolled as the PFP group, 30 matched runners without PFP were recruited as the control group. The PFP group was tested running with and without knee pain, while the control group had only one running test. Reflective marker coordinates and ground reaction force data were collected in each test. Knee kinematics and kinetics during running were reduced and compared between groups (PFP group without knee pain and control group) and between pain conditions (PFP group with knee pain and without knee pain), as well as between sexes. ResultsFemale and male participants with PFP had an increased peak knee valgus angle when running without pain compared to matched controls (P = 0.001), and to themselves when running with pain (P = 0.001). Male participants with PFP also had an increased peak knee flexion angle when running without pain compared to matched controls (P = 0.008), however did not decrease their peak knee flexion angle when running with pain (P = 0.245). No significant main effect of group or pain condition on any peak knee joint moment during running was detected (P ≥ 0.175). ConclusionsIncreased peak knee valgus angle during running appears to be a critical biomechanical factor associated with PFP in recreational runners, while decreasing knee valgus angle during running may be an adaptation to reduce symptoms of PFP. Increased peak knee flexion angle during running appears to be another biomechanical factor associated with PFP that is sex specific for male recreational runners.

Comparison of 5 Normalization Methods for Knee Joint Moments in the Single-Leg Squat.

Ratio scaling is the most common magnitude normalization approach for net joint moment (NJM) data. Generally, researchers compute a ratio between NJM and (some combination of) physical body characteristics (eg,mass, height, limb length, etc). However, 3 assumptions must be verified when normalizing NJM data this way. First, the regression line between NJM and the characteristic(s) used passes through the origin. Second, normalizing NJM eliminates its correlation with the characteristic(s). Third, the statistical interpretations following normalization are consistent with adjusted linear models. The study purpose was to assess these assumptions using data collected from 16 males and 16 females who performed a single-leg squat. Standard inverse dynamics analyses were conducted, and ratios were computed between the mediolateral and anteroposterior components of the knee NJM and participant mass, height, leg length, mass × height, and mass × leg length. Normalizing NJM-mediolateral by mass × height and mass × leg length satisfied all 3 assumptions. Normalizing NJM-anteroposterior by height and leg length satisfied all 3 assumptions. Therefore, if normalization of the knee NJM is deemed necessary to address a given research question, it can neither be assumed that using (any combination of) participant mass, height, or leg length as the denominator is appropriate nor consistent across joint axes.

Force Production Patterns of Muscles Surrounding Knee During Running and Cutting Maneuvers: A Musculoskeletal Modeling Approach

OBJECTIVES The purpose of this study was to investigate the force production patterns of individual muscles surrounding the knee during running (RUN) and cutting (CUT) tasks.METHODS Thirteen women (24.2±3.5 yrs, 162.8±6.0 cm, 55.3±6.2 kg) performed a series of running and cutting tasks. Running and cutting motions were recorded using a motion capture system and ground reaction force (GRF) was recorded using a force plate. Three-dimensional knee angle, ground reaction force, and knee joint moment were calculated using Visual3D software. OpenSim musculoskeletal modeling software was used to calculate the force of individual muscles including the medial hamstring, biceps femoris long head, biceps femoris short head, rectus femoris, vastus medialis, vastus lateralis, gastrocnemius medialis, and gastrocnemius lateralis. All data were analyzed for loading response (or weight acceptance), mid-stance, and final push-off periods, respectively and were compared between two tasks.RESULTS At loading response: external rotation angle, medial and vertical GRFs, and valgus moment for the CUT task were greater than those of the RUN task. Compared to the RUN task, the CUT task showed: 1) an increase in lateral hamstring muscle force at weight acceptance, 2) a decrease in hamstring muscle force and an increase in medial vastus muscle force at mid-stance, and 3) an increase in lateral gastrocnemius muscle force at final push-off.CONCLUSIONS Selective force production patterns of muscles surrounding the knee seem to offset the external load caused by the cutting motion. We anticipate that our results will provide basic data for future training programs designed to prevent noncontact knee injuries.

Knee joint biomechanics during gait improve from 3 to 6 months after anterior cruciate ligament reconstruction.

Gait alterations after anterior cruciate ligament reconstruction (ACLR) are commonly reported and have been linked to posttraumatic osteoarthritis development. While knee gait alterations have been studied at several time points after ACLR, little is known about how these biomechanical variables change earlier than 6 months after surgery, nor is much known about how they differ over the entire stance phase of gait. The purpose of this study was to examine knee gait biomechanical variables over their entire movement pattern through stance at both 3 and 6 months after ACLR and to study the progression of interlimb asymmetry between the two postoperative time points. Thirty-five individuals underwent motion analysis during overground walking 3 (3.2 ± 0.5) and 6 (6.4 ± 0.7) months after ACLR. Knee biomechanical variables were compared between limbs and across time points through 100% of stance using statistical parametric mapping; this included a 2 × 2 (Limb × Time) repeated measures analysis of variance and two-tailed t-tests. Smaller knee joint angles, moments, extensor forces, and medial compartment forces were present in the involved versus uninvolved limb. Interlimb asymmetries were present at both time points but were less prevalent at 6 months. The uninvolved limb's biomechanical variables stayed relatively consistent over time, while the involved limb's trended toward that of the uninvolved limb. Statement of Clinical Significance: Interventions to correct asymmetrical gait patterns after ACLR may need to occur early after surgery and may need to focus on multiple parts of stance phase.

Comparison of Biomechanical Characteristics during the Second Landing Phase in Female Latin Dancers: Evaluation of the Bounce and Side Chasse Step

Research on dance lower extremity joint motion has been limited. Thus, the purpose of this study was to investigate the lower limb biomechanics differences between the side chasse step (SCS) and the bounce step (BS) of the second landing phase in Jive. Thirteen female recreational Latin dancers (Age: 22 ± 2.5 years; Height: 1.65 ± 0.05 m; Weight: 50 ± 4.5 kg; Dance experience: 4 ± 2 years) were involved in the experiment. The same music was used throughout the data collection period. We intended to determine whether these two steps generate different kinematic and kinetic data. The ankle, hip, and knee joint angle, moment, velocity, and ground reaction force were calculated for each step. Results demonstrated that the lower limb biomechanics of the two different steps showed significant differences. As a result, strengthening the lower limb muscles (gastrocnemius, Tibialis muscle, and quadriceps) is significantly important to balance the joint strength and prevent foot injury. According to the training time reasonably increasing the heel height should be recognized as important. The current study could provide new insights into reducing lower extremity injuries and improving dance performance.

Effects of Forefoot Shoe on Knee and Ankle Loading during Running in Male Recreational Runners

Objectives: Although overuse running injury risks for the ankle and knee are high, the effect of different shoe designs on Achilles tendon force (ATF) and Patellofemoral joint contact force (PTF) loading rates are unclear. Therefore, the primary objective of this study was to compare the ATF at the ankle and the PTF and Patellofemoral joint stress force (PP) at the knee using different running shoe designs (forefoot shoes vs. normal shoes). Methods: Fourteen healthy recreational male runners were recruited to run over a force plate under two shoe conditions (forefoot shoes vs. normal shoes). Sagittal plane ankle and knee kinematics and ground reaction forces were simultaneously recorded. Ankle joint mechanics (ankle joint angle, velocity, moment and power) and the ATF were calculated. Knee joint mechanics (knee joint angle velocity, moment and power) and the PTF and PP were also calculated. Results: No significant differences were observed in the PTF, ankle plantarflexion angle, ankle dorsiflexion power, peak vertical active force, contact time and PTF between the two shoe conditions. Compared to wearing normal shoes, wearing the forefoot shoes demonstrated that the ankle dorsiflexion angle, knee flexion velocity, ankle dorsiflexion moment extension, knee extension moment, knee extension power, knee flexion power and the peak patellofemoral contact stress were significantly reduced. However, the ankle dorsiflexion velocity, ankle plantarflexion velocity, ankle plantarflexion moment and Achilles tendons force increased significantly. Conclusions: These findings suggest that wearing forefoot shoes significantly decreases the patellofemoral joint stress by reducing the moment of knee extension, however the shoes increased the ankle plantarflexion moment and ATF force. The forefoot shoes effectively reduced the load on the patellofemoral joint during the stance phase of running. However, it is not recommended for new and novice runners and patients with Achilles tendon injuries to wear forefoot shoes.

Knee dynamics during take-off and landing in spike jumps performed by volleyball players with patellar tendinopathy.

[Purpose] Patellar tendinopathy is a common sports injury. The risk factors for this injury can be categorized as intrinsic, extrinsic, and dynamic. We examined the dynamic factors in this study. [Participants and Methods] The participants were volleyball players who were assigned to a patient group (n=6) if they had medial patellar tendinopathy in the left knee or to a control group (n=7) otherwise. The participants performed spike jumps, and their ground reaction force and three-dimensional kinematic data were recorded. Knee angle and moment data were extracted at the peak extension moment of take-off and landing. [Results] The two groups showed no differences in knee angles. A tendency for abduction/external rotation moments at take-off and landing on both sides was observed in the control group, while the patient group showed adduction and internal rotation moments at take-off and adduction moment at landing in the left (injured) knee. [Conclusion] The observed knee joint moments in the left (injured) knee of the patient group may have been involved in the pathophysiological mechanism underlying the development of patellar tendinopathy.

Proactive Modulation in the Spatiotemporal Structure of Muscle Synergies Minimizes Reactive Responses in Perturbed Landings.

Stability training in the presence of perturbations is an effective means of increasing muscle strength, improving reactive balance performance, and reducing fall risk. We investigated the effects of perturbations induced by an unstable surface during single-leg landings on the mechanical loading and modular organization of the leg muscles. We hypothesized a modulation of neuromotor control when landing on the unstable surface, resulting in an increase of leg muscle loading. Fourteen healthy adults performed 50 single-leg landings from a 30 cm height onto two ground configurations: stable solid ground (SG) and unstable foam pads (UG). Ground reaction force, joint kinematics, and electromyographic activity of 13 muscles of the landing leg were measured. Resultant joint moments were calculated using inverse dynamics and muscle synergies with their time-dependent (motor primitives) and time-independent (motor modules) components were extracted via non-negative matrix factorization. Three synergies related to the touchdown, weight acceptance, and stabilization phase of landing were found for both SG and UG. When compared with SG, the motor primitive of the touchdown synergy was wider in UG (p < 0.001). Furthermore, in UG the contribution of gluteus medius increased (p = 0.015) and of gastrocnemius lateralis decreased (p < 0.001) in the touchdown synergy. Weight acceptance and stabilization did not show any statistically significant differences between the two landing conditions. The maximum ankle and hip joint moment as well as the rate of ankle, knee, and hip joint moment development were significantly lower (p < 0.05) in the UG condition. The spatiotemporal modifications of the touchdown synergy in the UG condition highlight proactive adjustments in the neuromotor control of landings, which preserve reactive adjustments during the weight acceptance and stabilization synergies. Furthermore, the performed proactive control in combination with the viscoelastic properties of the soft surface resulted in a reduction of the mechanical loading in the lower leg muscles. We conclude that the use of unstable surfaces does not necessarily challenge reactive motor control nor increase muscle loading per se. Thus, the characteristics of the unstable surface and the dynamics of the target task must be considered when designing perturbation-based interventions.

Symmetry in Triple Hop Distance Hides Asymmetries in Knee Function After ACL Reconstruction in Athletes at Return to Sports

Background: After anterior cruciate ligament reconstruction (ACLR), a battery of strength and hop tests is frequently used to determine the readiness of an athlete to successfully return to sports. However, the anterior cruciate ligament reinjury rate remains alarmingly high. Purpose: To evaluate the lower limb function of athletes after ACLR at the time when they had been cleared to return to sports (RTS). We aimed to evaluate if passing discharge criteria ensures restoration of normal lower limb biomechanics in terms of kinematics, kinetics, work, and percentage work contribution during a triple hop for distance. Study Design: Controlled laboratory study. Methods: Integrated 3-dimensional motion analysis was performed in 24 male athletes after ACLR when cleared to RTS and 23 healthy male controls during the triple-hop test. The criteria for RTS were (1) clearance by the surgeon and the physical therapist, (2) completion of a sports-specific on-field rehabilitation program, and (3) limb symmetry index >90% after quadriceps strength and hop battery tests. Lower limb and trunk kinematics, as well as knee joint moments and work, were calculated. Between-limb differences (within athletes after ACLR) and between-group differences (between ACLR and control groups) were evaluated using mixed linear models. Results: Although achieving 97% limb symmetry in distance hopped and displaying almost 80% symmetry for knee work absorption in the second rebound and third landing, the ACLR cohorts demonstrated only 51% and 66% limb symmetry for knee work generation in the first and second rebound phases, respectively. During both work generation phases of the triple hop, the relative contribution of the involved knee was significantly smaller, with a prominent compensation from the hip joint (P < .001, for all phases) as compared with the uninvolved limb and the controls. In addition, patients deployed a whole body compensatory strategy to account for the between-limb differences in knee function, mainly at the hip, pelvis, and trunk. Conclusion: Symmetry in the triple hop for distance masked important deficits in the knee joint work. These differences were more prominent during work generation (concentric-propulsive) than work absorption (eccentric-landing). Clinical Relevance: Symmetry in hop distance during the triple hop test masked significant asymmetries in knee function after ACLR and might not be the appropriate outcome to use as a discharge criterion. Differences between limbs in athletes after ACLR were more prominent during the power generation than the absorption phase.

Altered biomechanics in bilateral total knee replacement patients during stair negotiation

BackgroundMany total knee replacement (TKR) patients need to have a contralateral knee replacement. Biomechanical differences between first and second replaced limbs of bilateral TKR have not been examined during stair negotiation. Additionally, it is unknown whether hip and ankle biomechanics of bilateral patients are altered. We examined hip, knee, and ankle biomechanics of first and second replaced limbs bilateral patients, as well as replaced and non-replaced limbs of unilateral patients, during stair ascent and descent. MethodsEleven bilateral TKR patients (70.09 ± 5.41 years, 1.71 ± 0.08 m, 91.78 ± 13.00 kg) and 15 unilateral TKR patients (64.93 ± 5.11 years, 1.75 ± 0.09 m, 89.18 ± 17.55 kg) were recruited. Patients performed three to five trials of stair ascent and descent. The second step, during ascent, was the step of interest when analyzing each limb. A 2 × 2 (limb × group) analysis of variance was performed to determine differences between limbs and groups. ResultsDuring ascent, bilateral patients exhibited decreased peak loading-response knee extension (KEM) and push-off plantarflexion moments. Unilateral replaced limb KEM was lower than non-replaced limbs. During descent, bilateral patients descended the staircase significantly slower, had lower peak loading-response vertical ground reaction force and KEM, and push-off KEM. Bilateral patients had higher peak loading-response hip extension and push-off plantarflexion moments, and increased knee adduction ROM, compared with unilateral TKA patients. ConclusionsBilateral patients exhibited similar hip, knee, and ankle joint moments between first and second replaced limbs. Substantial differences in hip, knee, and ankle biomechanics during stair negotiation in bilateral patients compared with unilateral patients may indicate a more complex adaptation strategy present in these patients.

Effects of obesity and foot arch height on gait mechanics: A cross-sectional study.

Foot arch structure contributes to lower-limb joint mechanics and gait in adults with obesity. However, it is not well-known if excessive weight and arch height together affect gait mechanics compared to the effects of excessive weight and arch height alone. The purpose of this study was to determine the influences of arch height and obesity on gait mechanics in adults. In this study, 1) dynamic plantar pressure, 2) spatiotemporal gait parameters, 3) foot progression angle, and 4) ankle and knee joint angles and moments were collected in adults with normal weight with normal arch heights (n = 11), normal weight with lower arch heights (n = 10), obesity with normal arch heights (n = 8), and obesity with lower arch heights (n = 18) as they walked at their preferred speed and at a pedestrian standard walking speed, 1.25 m/s. Digital foot pressure data were used to compute a measure of arch height, the Chippaux-Smirak Index (CSI). Our results revealed that BMI and arch height were each associated with particular measures of ankle and knee joint mechanics during walking in healthy young adults: (i) a higher BMI with greater peak internal ankle plantar-flexion moment and (ii) a lower arch height with greater peak internal ankle eversion and abduction moments and peak internal knee abduction moment (i.e., external knee adduction moment). Our results have implications for understanding the role of arch height in reducing musculoskeletal injury risks, improving gait, and increasing physical activity for people living with obesity.

Machine Learning-Based Estimation of Ground Reaction Forces and Knee Joint Kinetics from Inertial Sensors While Performing a Vertical Drop Jump.

Nowadays, the use of wearable inertial-based systems together with machine learning methods opens new pathways to assess athletes’ performance. In this paper, we developed a neural network-based approach for the estimation of the Ground Reaction Forces (GRFs) and the three-dimensional knee joint moments during the first landing phase of the Vertical Drop Jump. Data were simultaneously recorded from three commercial inertial units and an optoelectronic system during the execution of 112 jumps performed by 11 healthy participants. Data were processed and sorted to obtain a time-matched dataset, and a non-linear autoregressive with external input neural network was implemented in Matlab. The network was trained through a train-test split technique, and performance was evaluated in terms of Root Mean Square Error (RMSE). The network was able to estimate the time course of GRFs and joint moments with a mean RMSE of 0.02 N/kg and 0.04 N·m/kg, respectively. Despite the comparatively restricted data set and slight boundary errors, the results supported the use of the developed method to estimate joint kinetics, opening a new perspective for the development of an in-field analysis method.

Comparison of Gait Symmetry and Joint Moments in Unilateral and Bilateral Hip Osteoarthritis Patients and Healthy Controls.

Patients with unilateral hip osteoarthritis show a characteristic gait pattern in which they unload the affected leg and overload the unaffected leg. Information on the gait characteristics of patients with bilateral hip osteoarthritis is very limited. The main purposes of this study were to investigate whether the gait pattern of both legs of patients with bilateral hip osteoarthritis deviates from healthy controls and whether bilateral hip osteoarthritis patients show a more symmetrical joint load compared to unilateral hip osteoarthritis patients. In this prospective study, 26 patients with bilateral hip osteoarthritis, 26 patients with unilateral hip osteoarthritis and 26 healthy controls were included. The three groups were matched for gender, age and walking speed. Patients were scheduled for a unilateral total hip arthroplasty on the more affected/more painful side. All participants underwent a three-dimensional gait analysis. Gait kinematics and gait kinetics of patients and controls were compared using Statistical Parametric Mapping. Corrected for speed, the gait kinematics and kinetics of both legs of patients with bilateral hip osteoarthritis differed from healthy controls. Bilateral patients had symmetrical knee joint loading, in contrast to the asymmetrical knee joint loading in unilateral hip osteoarthritis patients. The ipsilateral leg of the bilateral patients could be included in studies in addition to unilateral hip osteoarthritis patients as no differences were found. Although patients with bilateral hip osteoarthritis show more symmetrical frontal plane knee joint moments, a pathological external knee adduction moment in the second half of stance was present in the ipsilateral leg in patients with unilateral and bilateral hip osteoarthritis. The lateral adjustment of the knee adduction moment may initiate or accelerate progression of degenerative changes in the lateral compartment of the knee.

Sprinting Biomechanics and Hamstring Injuries: Is There a Link? A Literature Review.

Hamstring strain injury (HSI) is a common and costly injury in many sports such as the various professional football codes. Most HSIs have been reported to occur during high intensity sprinting actions. This observation has led to the suggestion that a link between sprinting biomechanics and HSIs may exist. The aim of this literature review was to evaluate the available scientific evidence underpinning the potential link between sprinting biomechanics and HSIs. A structured search of the literature was completed followed by a risk of bias assessment. A total of eighteen studies were retrieved. Sixteen studies involved retrospective and/or prospective analyses, of which only three were judged to have a low risk of bias. Two other case studies captured data before and after an acute HSI. A range of biomechanical variables have been measured, including ground reaction forces, trunk and lower-limb joint angles, hip and knee joint moments and powers, hamstring muscle–tendon unit stretch, and surface electromyographic activity from various trunk and thigh muscles. Overall, current evidence was unable to provide a clear and nonconflicting perspective on the potential link between sprinting biomechanics and HSIs. Nevertheless, some interesting findings were revealed, which hopefully will stimulate future research on this topic.

Limited knee extension during gait after total knee arthroplasty is related to a low Oxford Knee Score

BackgroundAfter total knee replacement (TKR) some patients report low self-perceived function, which is clinically measured using patient reported outcome measures (PROMs). However, PROMs, e.g. the Oxford Knee Score (OKS), inherently lack objective parameters of knee function. Biomechanical gait analysis is an objective and reliable measurement to quantitatively assess joint function. Therefore, the aim of this study was to explore the relationship between biomechanical gait parameters and the OKS. MethodsGait analyses were recorded in 37 patients at least one year after primary TKR and in 24 healthy controls. Parameters from this analysis were calculated for hip, knee and ankle joint angles and joint moments in the sagittal and frontal plane including initial contact, early, late stance and swing. For the patients these parameters were expressed as its difference to control values at matched walking speed. Linear regression analyses were performed between the parameters from gait analysis and the OKS, with speed as covariate. ResultsThe difference in knee extension angle at initial contact and late stance between patients and controls was significantly related to the OKS. Per one degree knee extension difference increase, the OKS reduced with 1.0 to 1.6 points. Overall, patients extended their knee less than controls. Neither ankle and hip gait parameters, nor joint moments showed a relation with OKS. ConclusionsAll patients with a submaximal score on the OKS showed limited knee extension during gait, even without a mechanical constraint in knee extension. This could be related to motor control limitations in this patient group.

Prediction of the Risk Factors of Knee Injury During Drop-Jump Landing With Core-related Measurements in Amature Basketball Players.

Purpose: To evaluate the relationship between specific aspects of core stability and knee injury risk factors during drop-jump (DJ) landing.Methods: Eighteen college-aged male amateur basketball players participated in the project. Kinetic and kinematic data for DJ tasks were collected with force plates and infrared cameras. Raw data were processed to calculate knee joint angles and joint moments during DJ landing. Different components of core stability were represented by the sit-ups in 20 s (SU), trunk extensor endurance, trunk flexion and extension range of motion, dominant extremity single-leg stance time (DLS), and dominant extremity single-leg hop distance, respectively.Methods: Correlation and regression were used to determine the relationship between jumping-related biomechanical parameters and core stability components.Results: SU shared significant variance with the peak moment of knee extension (PMKE, p < 0.05), the peak moment of knee abduction (PMKA, p < 0.05), and the angle of knee internal rotation at initial contact (AKRI, p < 0.05). DLS shared significant variance with the angular motion of knee internal rotation (AMKR, p < 0.05) and the AKRI (p < 0.01). SU and DLS together could explain 52% of the variance observed in the AKRI, and the result was significant.Conclusion: Core stability’s strength and motor control aspects played an essential role in preventing knee injury during DJ landing. An integrative training program addressing core strength and motor control could be considered for coaches and athletes to prevent knee injury through core training and conditioning.

The Impact of Patellar Tendon Advancement on Knee Joint Moment and Muscle Forces in Patients with Cerebral Palsy.

Background: Patellar tendon advancement (PTA) is performed for the treatment of crouch gait in patients with cerebral palsy (CP). In this study, we aimed to determine the influence of PTA in the context of single-event multilevel surgery (SEMLS) on knee joint moment and muscle forces through musculoskeletal modeling; Methods: Gait data of children with CP and crouch gait were retrospectively analyzed. Patients were included if they had a SEMLS with a PTA (PTA group, n = 18) and a SEMLS without a PTA (NoPTA group, n = 18). A musculoskeletal model was used to calculate the pre- and postoperative knee joint moments and muscle forces; Results: Knee extensor moment increased in the PTA group postoperatively (p = 0.016), but there was no statistically significant change in the NoPTA group (p > 0.05). The quadriceps muscle forces increased for the PTA group (p = 0.034), while there was no difference in the NoPTA group (p > 0.05). The hamstring muscle forces increased in the PTA group (p = 0.039), while there was no difference in the NoPTA group (p > 0.05); Conclusions: PTA was found to be an effective surgery for the treatment of crouch gait. It contributes to improving knee extensor moment, decreasing knee flexor moment, and enhancing the quadriceps and hamstring muscle forces postoperatively.

Impact of subject-specific step width modification on the knee and hip adduction moments during gait.

Patients with hip osteoarthritis (OA) exhibit an increased step width (SW) during walking before and up to 2 years after total hip arthroplasty. Wider SW is associated with a reduction in the external knee adduction moment (KAM), but there is a lack of research regarding the effect of SW on the hip adduction moment (HAM). Is a wider SW an effective compensatory mechanism to reduce the hip joint loading? We hypothesized that (1) an increased SW reduces, (2) a decreased SW increases the KAM/HAM, and (3) secondary kinematic gait changes have an effect on the KAM/HAM. Twenty healthy individuals (24.0 ± 2.5 years of age) underwent instrumented gait analyses with 4 different subject-specific SW modifications (habitual, halved, double, and triple SW). The resulting external KAMs and HAMs were compared using statistical parametric mapping (SPM). Post hoc testing demonstrated significantly lower HAM for both the double (p < 0.001, 15-31 % and 61-98 % of the stance phase) and the triple SW (p < 0.001, 1-36 % and 58-98 %) compared to the habitual SW. The extent of the reduction at the first and second peak was comparable for HAM (15-25 % reduction) and less pronounced at the first peak of KAM (9-11 % reduction) compared to the second peak of KAM (19-28 % reduction). In contrast, halving the SW did not lead to a significant change in KAM or HAM compared to the habitual SW (p > 0.009). An increase in SW is an effective and simple gait mechanism to reduce the frontal plane knee and hip joint moments. However, hypothesis 2 could not be confirmed, as halving the SW did not cause a significant change in KAM or HAM. Given the results of the present study, gait retraining with regard to an increased SW may be an adequate, noninvasive option for the treatment of patients with hip OA.