Reaction Kinetics Research Articles

Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction.

Water electrolysis is one promising and eco-friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2-xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best-performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe-based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2-xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large-scale and sustainable hydrogen gas generation.

Elevated Water Oxidation by Cation Leaching Enabled Tunable Surface Reconstruction

AbstractWater electrolysis is one promising and eco‐friendly technique for energy storage, yet its overall efficiency is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Therefore, developing strategies to boost OER catalyst performance is crucial. With the advances in characterization techniques, an extensive phenomenon of surface structure evolution into an active amorphous layer was uncovered. Surface reconstruction in a controlled fashion was then proposed as an emerging strategy to elevate water oxidation efficiency. In this work, Cr substitution induces the reconstruction of NiFexCr2‐xO4 during cyclic voltammetry (CV) conditioning by Cr leaching, which leads to a superior OER performance. The best‐performed NiFe0.25Cr1.75O4 shows a ~1500 % current density promotion at overpotential η=300 mV, which outperforms many advanced NiFe‐based OER catalysts. It is also found that their OER activities are mainly determined by Ni : Fe ratio rather than considering the contribution of Cr. Meanwhile, the turnover frequency (TOF) values based on redox peak and total mass were obtained and analysed, and their possible limitations in the case of NiFexCr2‐xO4 are discussed. Additionally, the high activity and durability were further verified in a membrane electrode assembly (MEA) cell, highlighting its potential for practical large‐scale and sustainable hydrogen gas generation.

Ligand Isomerization Driven Electrocatalytic Switching.

The prevailing view about molecular catalysts is that the central metal ion is responsible for the reaction mechanism and selectivity, whereas the ligands mainly affect the reaction kinetics. Here, we question this paradigm and show that ligands have a dramatic influence on the selectivity of the product. We show how even a seemingly small change in ligand isomerization sharply alters the selectivity of the well-researched oxygen reduction reaction (ORR) Co phthalocyanine catalyst from an indirect 2e- to a direct 4e- pathway. Detailed analysis reveals that intramolecular hydrogen-bond interactions in the ligand activate the catalytic Co, directing the oxygen binding and thus deciding the final product. The resulting catalyst is the first example of a Co-based molecular catalyst catalyzing a direct 4e- ORR via ligand isomerization, for which it shows an activity close to the benchmark Pt in an actual H2-O2 fuel cell. The effect of the ligand isomerism is demonstrated with different central metal ions, thus highlighting the generalizability of the findings and their potential to open new possibilities in the design of molecular catalysts.

Ligand Isomerization Driven Electrocatalytic Switching

AbstractThe prevailing view about molecular catalysts is that the central metal ion is responsible for the reaction mechanism and selectivity, whereas the ligands mainly affect the reaction kinetics. Here, we question this paradigm and show that ligands have a dramatic influence on the selectivity of the product. We show how even a seemingly small change in ligand isomerization sharply alters the selectivity of the well‐researched oxygen reduction reaction (ORR) Co phthalocyanine catalyst from an indirect 2e− to a direct 4e− pathway. Detailed analysis reveals that intramolecular hydrogen‐bond interactions in the ligand activate the catalytic Co, directing the oxygen binding and thus deciding the final product. The resulting catalyst is the first example of a Co‐based molecular catalyst catalyzing a direct 4e− ORR via ligand isomerization, for which it shows an activity close to the benchmark Pt in an actual H2−O2 fuel cell. The effect of the ligand isomerism is demonstrated with different central metal ions, thus highlighting the generalizability of the findings and their potential to open new possibilities in the design of molecular catalysts.

In Situ Self‐Assembled Active and Stable Ir@MnOx/La0.7Sr0.3Cr0.9Ir0.1O3−δ Interfaces for CO2 Electrolysis

AbstractSolid oxide electrolysis cells are prospective approaches for CO2 utilization but face significant challenges due to the sluggish reaction kinetics and poor stability of the fuel electrodes. Herein, we strategically addressed the long‐standing trade‐off phenomenon between enhanced exsolution and improved structural stability via topotactic ion exchange. The surface dynamic reconstruction of the MnOx/La0.7Sr0.3Cr0.9Ir0.1O3−δ (LSCIr) catalyst was visualized at the atomic scale. Compared with the Ir@LSCIr interface, the in situ self‐assembled Ir@MnOx/LSCIr interface exhibited greater CO2 activation and easily removable carbonate intermediates, thus reached a 42 % improvement in CO2 electrolysis performance at 1.6 V. Furthermore, an improved CO2 electrolysis stability was achieved due to the uniformly wrapped MnOx shell of the Ir@MnOx/LSCIr cathode. Our approach enables a detailed understanding of the dynamic microstructure evolution at active interfaces and provides a roadmap for the rational design and evaluation of efficient metal/oxide catalysts for CO2 electrolysis.

In Situ Self-Assembled Active and Stable Ir@MnOx/La0.7Sr0.3Cr0.9Ir0.1O3-δ Interfaces for CO2 Electrolysis.

Solid oxide electrolysis cells are prospective approaches for CO2 utilization but face significant challenges due to the sluggish reaction kinetics and poor stability of the fuel electrodes. Herein, we strategically addressed the long-standing trade-off phenomenon between enhanced exsolution and improved structural stability via topotactic ion exchange. The surface dynamic reconstruction of the MnOx/La0.7Sr0.3Cr0.9Ir0.1O3-δ (LSCIr) catalyst was visualized at the atomic scale. Compared with the Ir@LSCIr interface, the in situ self-assembled Ir@MnOx/LSCIr interface exhibited greater CO2 activation and easily removable carbonate intermediates, thus reached a 42 % improvement in CO2 electrolysis performance at 1.6 V. Furthermore, an improved CO2 electrolysis stability was achieved due to the uniformly wrapped MnOx shell of the Ir@MnOx/LSCIr cathode. Our approach enables a detailed understanding of the dynamic microstructure evolution at active interfaces and provides a roadmap for the rational design and evaluation of efficient metal/oxide catalysts for CO2 electrolysis.

Study on Mechanism and Kinetics of the H2O-Abstraction Reactions Between C3H4 Isomers and •OH Radicals

Study on Mechanism and Kinetics of the H2O-Abstraction Reactions Between C3H4 Isomers and •OH Radicals

Direct Electroplating Ruthenium Precursor on the Surface Oxidized Nickel Foam for Efficient and Stable Bifunctional Alkaline Water Electrolysis.

Water electrolysis to produce hydrogen (H2) using renewable energy is one of the most promising candidates for realizing carbon neutrality, but its reaction kinetics is hindered by sluggish anodic oxygen evolution reaction (OER). Ruthenium (Ru) in its high-valence state (oxide) provides one of the most active OER sites and is less costly, but thermodynamically unstable. The strong interaction between Ru nanoparticles (NPs) and nickel hydroxide (Ni(OH)2) is leveraged to directly form Ru-Ni(OH)2 on the surface of a porous nickel foam (NF) electrode via spontaneous galvanic replacement reaction. The formation of Ru─O─Ni bonds at the interface of the Ru NPs and Ni(OH)2 (Ru-Ni(OH)2) on the surface oxidized NF significantly enhance stability of the Ru-Ni(OH)2/NF electrode. In addition to OER, the catalyst is active enough for the hydrogen evolution reaction (HER). As a result, it is able to deliver overpotentials of 228 and 15mV to reach 10mA cm-2 for OER and HER, respectively. An industry-scale evaluation using Ru-Ni(OH)2/NF as both OER and HER electrodes demonstrates a high current density of 1500mA cm-2 (OER: 410mV; HER: 240mV), surpassing commercial RuO2 (OER: 600mV) and Pt/C based performance (HER: 265mV).

Probabilistic and maximum entropy modeling of chemical reaction systems: Characteristics and comparisons to mass action kinetic models.

We demonstrate and characterize a first-principles approach to modeling the mass action dynamics of metabolism. Starting from a basic definition of entropy expressed as a multinomial probability density using Boltzmann probabilities with standard chemical potentials, we derive and compare the free energy dissipation and the entropy production rates. We express the relation between entropy production and the chemical master equation for modeling metabolism, which unifies chemical kinetics and chemical thermodynamics. Because prediction uncertainty with respect to parameter variability is frequently a concern with mass action models utilizing rate constants, we compare and contrast the maximum entropy model, which has its own set of rate parameters, to a population of standard mass action models in which the rate constants are randomly chosen. We show that a maximum entropy model is characterized by a high probability of free energy dissipation rate and likewise entropy production rate, relative to other models. We then characterize the variability of the maximum entropy model predictions with respect to uncertainties in parameters (standard free energies of formation) and with respect to ionic strengths typically found in a cell.

Approaching Ultimate Synthesis Reaction Rate of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

HighlightsA series of layered oxide cathode materials were synthesized by high-temperature shock strategy for the first time.The approaching ultimate solid reaction rate of the layered nickel-rich layered oxide LiNixCoyMnzO2 was investigated for the first time. Ultrafast average reaction rate of phase transition from Ni0.6Co0.2Mn0.2(OH)2 to Li-containing oxides is 66.7 (% s-1), that is, taking only 1.5 s.

Chitin-derived hierarchical meso- and microporous carbon enables high-rate sulfur cathode of sodium-sulfur batteries.

Room temperature Na-S batteries are considered as a promising alternative energy storage system because of their abundant material resources and high theoretical energy density. However, the severe polysulfide shuttle effect and slow reaction kinetics hinder their practical application. Herein, a hierarchical meso- and microporous carbon with nitrogen self-doping (NSPC) is prepared using chitin as the carbon precursor and serves as a novel host to confine the sulfur (S⊂NSPC). An optimized structure of NSPC, including abundant graphite nanocrystals, large pore volume of 1.76 cm3 g-1, and large specific surface area of 2073 m2 g-1 is obtained at the carbonization temperature of 1000 °C. These merits contribute to significantly enhanced charge transfer and ion diffusion of the as-prepared S⊂NSPC-1000 cathode, which exhibits the outstanding sodium storage performance, including high reversible capacities of 1207 mAh g-1 at 0.1 C and 891 mAh g-1 at 2 C and stable cycling with a low capacity decay for 400 cycles at 1 C, among other S⊂NSPC cathodes and previously reported cathodes for Na-S batteries. This cathode can also afford stable cycling at a high sulfur loading.

Kinetics of Strand Displacement Reaction with Acyclic Artificial Nucleic Acids.

Toehold-mediated strand displacement (TMSD) reaction, one of the DNA nanotechnologies, has great potential as s biological programmable platform in the cellular environment. Various artificial nucleic acids have been developed to improve stability and affinity for biological applications. However, the lack of understanding of the kinetics of TMSD reaction among artificial nucleic acids has limited their applications. We herein systematically characterized the kinetics of TMSD reactions with acyclic xeno nucleic acids (XNAs): serinol nucleic acid (SNA), acyclic D-threoninol nucleic acid (D-aTNA), and acyclic L-threoninol nucleic acid (L-aTNA). We found that the strand displacement reactions by D-aTNA and by L-aTNA were highly dependent on temperature. D-aTNA and L-aTNA systems were orthogonal to each other, and chirality of the input can be switched by using SNA as an interface. We also applied TMSD reactions of XNAs to a seesaw gate amplification system which utilizes the orthogonality. This work will contribute to the developments of thermoresponsive and bioorthogonal nucleic acid circuits.

Chemical dynamics in a radioactive platinum -cerium oxide-water mixture within a vibrating Riga channel subject to sudden pressure gradient onset

Chemical dynamics in a radioactive platinum -cerium oxide-water mixture within a vibrating Riga channel subject to sudden pressure gradient onset

Parameter Optimization and Reaction Kinetics of the Reduction of Vanadium–Titanium Sinter by CO–CO2–H2–N2 Mixed Gases

Parameter Optimization and Reaction Kinetics of the Reduction of Vanadium–Titanium Sinter by CO–CO2–H2–N2 Mixed Gases

Steering Geometric Reconstruction of Bismuth with Accelerated Dynamics for CO2 Electroreduction.

Bismuth-based materials have emerged as promising catalysts in the electrocatalytic reduction of CO2 to formate. However, the reasons for the reconstruction of Bi-based precursors to form bismuth nanosheets are still puzzling, especially the formation of defective bismuth sites. Herein, we prepare bismuth nanosheets with vacancy-rich defects (V-Bi NS) by rapidly reconstructing Bi19Cl3S27 under negative potential. Theoretical analysis reveals that the introduction of chlorine induces the generation of intrinsic electric field in the precursor, thereby increasing the electron transfer rate and further promoting the metallization of trivalent bismuth. Meanwhile, in situ Raman and ex situ XRD tests verify that Bi19Cl3S27 has a faster reconstruction rate than Bi2S3. The formed V-Bi NS exhibits up to 96% HCOO- Faraday efficiency and 400 mA cm-2 HCOO- partial current densities, and its ECSA normalized formate current density and yield are 2.2 times higher than those of intact bismuth nanosheets (I-Bi NS). Density functional theory (DFT) calculations indicate that bismuth vacancies with electron-rich aggregation reduce the activation energy of CO2 to *CO2- radicals and stabilize the adsorption of the key intermediate *OCHO, thus facilitating the reaction kinetics of formate production.

Precisely Designed Ultra-Small CoP Nanoparticles-decorated Hollow Carbon Nanospheres as Highly Efficient Host in Lithium-Sulfur Batteries.

Designing porous carbon materials with metal phosphides as host materials holds promise for enhancing the cyclability and durability of lithium-sulfur (Li-S) batteries by mitigating sulfur poisoning and exhibiting high electrocatalytic activity. Nevertheless, it is urgent to precisely control the size of metal phosphides to further optimize the polysulfide conversion reaction kinetics of Li-S batteries. Herein, a subtlety regulation strategy was proposed to obtain ultra-small CoP nanoparticles-decorated hollow carbon nanospheres (CoP@C) by using spherical polyelectrolyte brush (SPB) as the template with stabilizing assistance from polydopamine coating, which also works as carbon source. Leveraging the electrostatic interaction between SPB and Co2+, ultra-small Co particles with sizes measuring 5.5 ± 2.6 nm were endowed after calcination. Subsequently, through a gas-solid phosphating process, these Co particles were converted into CoP nanoparticles with significantly finer sizes (7.1 ± 3.1 nm) compared to state-of-the-art approaches. By uniformly distributing the electrocatalyst nanoparticles on hollow carbon nanospheres, CoP@C facilitated the acceleration of Li ion diffusion and enhanced the conversion reaction kinetics of polysulfides through adsorption-diffusion synergy. As a result, Li-S batteries utilizing the CoP@C/S cathode demonstrated an initial specific discharge capacity of 850.0 mAh g-1 at 1.0 C, with a low-capacity decay rate of 0.03% per cycle.

Advancing Nitrile-Aminothiol Strategy for Dual and Sequential Bioconjugation.

Nitrile-aminothiol conjugation (NATC) stands out as a promising biocompatible ligation technique due to its high chemo-selectivity. Herein we investigated the reactivity and substrate scope of NAT conjugation chemistry, thus developing a novel pH dependent orthogonal NATC as a valuable tool for chemical biology. The study of reaction kinetics elucidated that the combination of heteroaromatic nitrile and aminothiol groups led to the formation of an optimal bioorthogonal pairing, which is pH dependent. This pairing system was effectively utilized for sequential and dual conjugation. Subsequently, these rapid (≈1 h) and high yield (>90%) conjugation strategies were successfully applied to a broad range of complex biomolecules, including oligonucleotides, chelates, small molecules and peptides. The effectiveness of this conjugation chemistry was demonstrated by synthesizing a fluorescently labelled antimicrobial peptide-oligonucleotide complex as a dual conjugate to imaging in live cells. This first-of-its-kind sequential NATC approach unveils unprecedented opportunities in modern chemical biology, showcasing exceptional adaptability in rapidly creating structurally complex bioconjugates. Furthermore, the results highlight its potential for versatile applications across fundamental and translational biomedical research.

Interfacially Ordered NiCoMoS Nanosheets Arrays on Hierarchical Ti3C2Tx MXene for High-energy-density Fiber-Shaped Supercapacitors with Accelerated Pseudocapacitive Kinetics.

Balancing electrochemical activity and structural reversibility of fibrous electrodes with accelerated Faradaic charge transfer kinetics and pseudocapacitive storage are highly crucial for fiber-shaped supercapacitors (FSCs). Herein, we report novel core-shell hierarchical fibers for high-performance FSCs, in which the ordered NiCoMoS nanosheets arrays are chemically anchored on Ti3C2Tx fiber. Beneficial from architecting stable polymetallic sulfide arrays and conductive networks, the NiCoMoS-Ti3C2Tx fiber maintains fast charge transfer, low diffusion and OH- adsorption barrier, and stabilized multi-electronic reaction kinetics of polymetallic sulfide. Consequently, the NiCoMoS-Ti3C2Tx fiber exhibits a large volumetric capacitance (2472.3 F cm-3) and reversible cycling performance (20,000 cycles). In addition, the solid-state symmetric FSCs deliver a high energy density of 50.6 mWh cm-3 and bending stability, which can significantly power electronic devices and offer sensitive detection for dopamine.

Redistribution and activation of inert N-configuration in metallic electron donor towards boosted oxygen reaction kinetics for zinc-air batteries

The utilization of metallic nitrides as air–cathode electrocatalysts is promising for sparking fresh vitality to rechargeable zinc-air batteries, but successful case is rare due to their limitation to catalyze one specific reaction. Here, mild topochemical evolution coupled with assembly self-templating is presented to achieve electrocatalytic furnishing on the 2D metallic VN nanosheet. Density functional theory (DFT) calculations predict that lowered energy barriers for potential limiting steps can be achieved by hybridization VN with cost-effective active species. Metallic VN hybrid architecture buffered with flocculent carbon matrix is constructed, featuring decoration of active FeNi alloy nanoparticles (VN-FeNiA@FC). Particularly, prominent interfacial electron delocalization owing to the electron donating from VN boosts the oxygen reaction kinetics. As a stride forward, the redistribution and activation of inert N-configuration from host VN to the formation of Fe/Ni–Nx are revealed, contributing to promoted exposure of active sites. As a proof of concept, a rechargeable zinc-air battery based on bifunctional VN-FeNiA@FC catalyst exhibits desired galvanostatic charge/discharge stability for over 200 h, surpassing the noble metal-based benchmarks (Pt/C + Ir/C). This study is expected to open new avenues for designing hybrid materials with modulated electronic environment and interface chemistry for electrocatalytic applications and beyond.

Vanadium-Doped Heterogeneous Bimetallic Phosphides Derived from Layered Double Hydroxides for Saline Water Splitting.

The development of energy- and time-saving synthetic methods to prepare bifunctional and high stability catalysts are vital for overall water splitting. Here, V-doped nickel-iron hydroxide precursor by etching NiFe foam (NFF) at room temperature with dual chloride solution ("NaCl-VCl3"), is obtained then phosphating to obtain V-Ni2P-FeP/NFF as efficient bifunctional (oxygen/hydrogen exchange reaction, OER/HER) electrocatalysts, denoted as NFF(V, Na)-P. The NFF(V, Na)-P requires only 185 and 117 mV overpotentials to reach 10 mA cm-2 for OER and HER. When used as a catalyst for water splitting in a full cell, it can be stably sustained for more than 1000 h in alkaline brine electrolysis at both current densities of 100 and 500 mA cm-2. In situ Raman analyses and density functional theory (DFT) show that the V-doping-induced surface remodeling generates hydroxyl oxides as the true catalytic active centers, which not only enhances the reaction kinetics, but also reduces the free energy change in the rate-determining step. This work provides a cost-effective substrate self-derivation method to convert commercial NFF into a powerful catalyst for electrolytic brine, offering a unique route to the development of efficient electrocatalysts for saline water splitting.