Protein Adsorption Kinetics Research Articles

Hemocompatibility of Albumin-Modified Magnetic Nanoparticles.

Kidney failure leads to the accumulation of metabolites in the blood compartment. This build-up of metabolites has been associated with increased mortality and morbidity in these patients; thus, these metabolites are commonly called uremic toxins. The retention of some uremic toxins in the blood results from a strong interaction with serum albumin, preventing their clearance using standard hemodialysis techniques. Adsorbents are considered the next-generation technology for clearing uremic toxins from the blood, and iron oxide magnetic nanoparticles are a promising material due to a high surface area that is easily modified and the ability to remove them from blood with an external magnetic field. Plasma protein adsorption and clot formation kinetics were determined for unmodified and albumin-modified iron oxide magnetic nanoparticles. Albumin was selected because it can bind uremic toxins, and it is commonly used to passivate surfaces. Coatings were formed and characterized using transmission electron microscopy, thermogravimetric analysis, and zeta-potential analysis. Clotting kinetics, total protein assays, and immunoblots were used to analyze the effect surface modification has on protein adsorption events. Unmodified nanoparticles showed rapid clotting and more adsorbed protein compared to albumin-coated iron oxide nanoparticles. Immunoblots show that modified particles showed changes in albumin, protein C, Immunoglobulin G, transferrin, fibrinogen, α1-antitrypsin, vitronectin, plasminogen, prothrombin, and antithrombin levels compared to unmodified controls. The hemocompatibility of adsorbent materials is essential to their clinical application in clearing the blood of uremic toxins.

Correlating Differences in the Surface Activity to Interface-Induced Particle Formation in Different Protein Modalities: IgG mAb Versus Fc-Fusion Protein.

The propensity of protein-based biologics to form protein particles during bioprocessing can be related to their interfacial properties. In this study, we compare the surface activity and interfacial film properties of two structurally different biologics, an IgG and Fc-fusion, in the absence and presence of interfacial dilatational stresses, and correlate these differences to their tendency to form interface-induced protein particles. Our results show that interface-induced particle formation is protein-dependent, with the Fc-fusion demonstrating greater interfacial stability. This observation can be correlated with faster adsorption kinetics of the Fc-fusion protein, and formation of a less incompressible film at the air-liquid interface. The addition of polysorbate 80 (PS80), commonly added to mitigate protein particle formation, led to a surfactant-dominant interface for quiescent conditions and coadsorption of protein and surfactant for the Fc-fusion when exposed to interfacial stress. On the other hand, for the IgG molecule, the surface always remained surfactant dominant. Image analysis demonstrated that PS80 was more effective in mitigating particle formation for the IgG than Fc-fusion. This suggests that a surfactant-dominant interface is necessary to prevent interface-induced protein particle formation. Further, while PS80 is effective in mitigating particle formation in the IgG formulation, it may not be the best choice for other protein modalities.

In Situ Measurement of Nanoparticle-Blood Protein Adsorption and Its Heterogeneity with Single-Nanoparticle Resolution via Dual Fluorescence Quantification.

The formation of a protein corona gives nanomedicines a distinct biological identity, profoundly influencing their fate in the body. Nonspecific nanoparticle-protein interactions are typically highly heterogeneous, which can lead to unique biological behaviors and in vivo fates for individual nanoparticles that remain underexplored. To address this, we have established an in situ approach that allows quantitative examination of nanoparticle-protein adsorption at the individual nanoparticle level. This method integrates dual fluorescence quantification techniques, wherein the nanoparticles are first individually analyzed via nanoflow cytometry to detect fluorescent signals from adsorbed proteins. The obtained fluorescence intensity is then translated into protein quantities through calibration with microplate reader quantification. Consequently, this approach enables analysis of interparticle heterogeneity of nano-protein interactions, as well as in situ monitoring of protein adsorption kinetics and nanoparticle aggregation status in blood serum, preconditioning for a comprehensive understanding of nano-bio interactions, and predicting in vivo fate of nanomedicines.

Influence of titanium nanoscale surface roughness on fibrinogen and albumin protein adsorption kinetics and platelet responses.

Biomaterials with nanoscale topography have been increasingly investigated for medical device applications to improve tissue-material interactions. This study assessed the impact of nanoengineered titanium surface domain sizes on early biological responses that can significantly affect tissue interactions. Nanostructured titanium coatings with distinct nanoscale surface roughness were deposited on quartz crystal microbalance with dissipation (QCM-D) sensors by physical vapor deposition. Physico-chemical characterization was conducted to assess nanoscale surface roughness, nano-topographical morphology, wettability, and atomic composition. The results demonstrated increased projected surface area and hydrophilicity with increasing nanoscale surface roughness. The adsorption properties of albumin and fibrinogen, two major plasma proteins that readily encounter implanted surfaces, on the nanostructured surfaces were measured using QCM-D. Significant differences in the amounts and viscoelastic properties of adsorbed proteins were observed, dependent on the surface roughness, protein type, protein concentration, and protein binding affinity. The impact of protein adsorption on subsequent biological responses was also examined using qualitative and quantitative in vitro evaluation of human platelet adhesion, aggregation, and activation. Qualitative platelet morphology assessment indicated increased platelet activation/aggregation on titanium surfaces with increased roughness. These data suggest that nanoscale differences in titanium surface roughness influence biological responses that may affect implant integration.

L-Arginine sulfate reduces irreversible protein binding in immobilized metal affinity chromatography

Immobilized metal affinity chromatography (IMAC) is a powerful technique for capture and purification of relevant biopharmaceuticals in complex biological matrices. However, protein recovery can be drastically compromised due to surface induced spreading and unfolding of the analyte, leading to fouling of the stationary phase. Here, we report on the kinetics of irreversible adsorption of a protease on an IMAC resin in a time span ranging from minutes to several hours. This trend correlated with the thermal data measured by nano differential scanning calorimetry, and showed a time-dependent change in protein unfolding temperature. Our results highlight that ‘soft’ proteins show a strong time dependent increase in irreversible adsorption. Furthermore, commonly used co-solvents for preservation of the native protein conformation are tested for their ability to reduce fouling. Thermal data suggests that the amino acid l-arginine is beneficial in preventing unfolding, which was confirmed in batch adsorption experiments. The choice of counter-ions has to be considered when using this amino acid. These results show that l-arginine sulfate decelerates the irreversible adsorption kinetics of proteins on the IMAC stationary phase to a greater extent than l-arginine chloride.

Design and evaluation of electrospun nylon 6/Zn-doped hydroxyapatite scaffold for lysozyme protein absorption

This study focused on the design and fabrication of a hybrid electrospun scaffold of nylon 6 (N6)/Zn-doped hydroxyapatite (ZH) nanoparticles for the absorption of lysozyme (LYZ) protein. The effects of electrospinning parameters were investigated by the central composite design method to introduce a roadmap to synthesize a promising hybrid electrospun polymer/ceramic scaffold for protein absorption. A quadratic model based on the coded factors indicated that the concentration of the electrospinning solution was the most effective parameter on the morphology and microstructure of the electrospun scaffold among the other parameters namely distance of needle to the collector, high voltage, and flow rate. The results of the suggested model were evaluated by SEM and TEM microscopies, and it was found that the model was also valid in the actual conditions. The practical hybrid scaffold was electrospun via 16.58 kV high voltage, 0.34 mL.h−1 flow rate, 12.44 cm distance, 17.21 wt.% of N6, and 2.13 wt.% of ZH. Furthermore, the kinetics of LYZ protein adsorption by pristine and hybrid electrospun scaffolds was studied. The results showed that the incorporation of Zn-doped HAp into N6 scaffolds could enhance the ability of protein adsorption 1.5 times more than the pristine N6 scaffold.

In-situ synchrotron quantitative analysis of competitive adsorption tendency of human serum proteins on polyether sulfone clinical hemodialysis membrane

Comprehensive understanding of protein adsorption phenomenon on membrane surface during hemodialysis (HD) is one of the key moments for development of hemocompatible HD membrane. Though many mechanisms and kinetics of protein adsorption on some surface have been studied, we are still far away from complete understanding and control of this process, which results in a series of biochemical reactions that causes severe complications with health and even the death among HD patients. The aim of this study is to conduct quantitative analysis of competitive adsorption tendency of human serum protein on polyether sulfone (PES) clinical dialysis membrane. In situ synchrotron radiation micro-computed tomography (SR-µCT) imaging available at the Canadian Light Source (CLS) was conducted to assess human serum proteinbinding and undertake the corresponding quantitative analysis.The competitive adsorption of Human protein albumin (HSA), fibrinogen (FB) and transferrin (TRF) were tested from single and multiple protein solution. Furthermore, in-vitro human serum protein adsorption on clinical dialyzers was investigated using UV–Visible to confirm the competitive adsorption tendency. Results showed that when proteins were adsorbed from their mixture, FB content (among proteins) in the adsorbed layer increased from 3.6% mass (content in the initial solution) to 18% mass and 12%, in case of in situ quantitative and invitro analysis, respectively. The increase in FB content was accompanied by the decrease in the HSA content, while TRF remained on approximately on the same level for both cases. Overall, the percentage of HSA adsorption ratio onto the HD membrane has dropped approximately 10 times when HSA was adsorbed in competition with other proteins, compared to the adsorption from single HSA solution. The substitution of HSA with FB was especially noticeable when HSA adsorption from its single solution was compared with the case of the protein mixture. Moreover, SR-µCT has revealed that FB when adsorbed from a protein mixture solution is located predominately in the middle of the membrane, whereas the peak of the distribution is shifted to membrane bottom layers when adsorption from FB single solution takes place. Results showed that HSA FB and TRF adsorption behavior observations are similar on both in-situ small scale and clinical dialyzer of the PES membrane.

SARS-CoV-2 Spike Protein (RBD) Subunit Adsorption at Abiotic Surfaces and Corona Formation at Polymer Particles.

The adsorption kinetics of the SARS-CoV-2 spike protein subunit with the receptor binding domain at abiotic surfaces was investigated. A combination of sensitive methods was used such as atomic force microscopy yielding a molecular resolution, a quartz microbalance, and optical waveguide lightmode spectroscopy. The two latter methods yielded in situ information about the protein adsorption kinetics under flow conditions. It was established that at pH 3.5–4 the protein adsorbed on mica and silica surfaces in the form of compact quasi-spherical aggregates with an average size of 14 nm. The maximum coverage of the layers was equal to 3 and 1 mg m−2 at pH 4 and 7.4, respectively. The experimental data were successfully interpreted in terms of theoretical results derived from modeling. The experiments performed for flat substrates were complemented by investigations of the protein corona formation at polymer particles carried out using in situ laser Doppler velocimetry technique. In this way, the zeta potential of the protein layers was acquired as a function of the coverage. Applying the electrokinetic model, these primary data were converted to the dependence of the subunit zeta potential on pH. It was shown that a complete acid-base characteristic of the layer can be acquired only using nanomolar quantities of the protein.

Preliminary Characterization of Structural and Rheological Behavior of the Quinoa Hyperprotein-Defatted Flour

Protein functional properties are related to physical and chemical parameters that influence protein behavior in food systems during processing, storage and consumption. The structural and rheological properties of three quinoa hyperprotein flours (without defatting, WD, chemically defatted, CD, and mechanically defatted, MD) were evaluated. The values of the fluidity index (n) were significantly different (p < 0.05), which was associated with changes in protein or starch structures due to solvent treatments or heating of the flour during pressing. In addition, a strong dependence of the consistency index (k) on the shear rate was observed. For dispersions with a concentration of 12% (w/v), CD and WD had a significantly lower setback value than MD. The viscosity peak was affected by the presence of lipid molecules. Greater changes were evident in the β-sheet (1,610 and 1,625 cm−1) and β-spin (1,685 and 1,695 cm−1) structures. The changes identified in these structures were associated with the defatting treatment. Consequently, the intensity ratio 2,920/1,633 cm−1 was more sensitive to changes in the fat content of the flours. It was shown that defatting conditions increase the protein adsorption kinetics and that the viscoelastic properties of the protein increase when the flour has a lower fat content. Hyperprotein quinoa flour could be used to improve the protein content of products such as snacks, pastas, ice cream, bakery products, meat extenders, among others, due to its foaming, gelling or emulsifying capacity. The objective of this work was to study the effect of two types of defatting of hyperprotein quinoa flour on its structural and rheological properties.

Effect of protein adsorption on the dissolution kinetics of silica nanoparticles

Nanoparticulate systems in the presence of proteins are highly relevant for various biomedical applications such as photo-thermal therapy and targeted drug delivery. These involve a complex interplay between the charge state of nanoparticles and protein, the resulting protein conformation, adsorption equilibrium and adsorption kinetics, as well as particle dissolution. SiO2 is a common constituent of bioactive glasses used in biomedical applications. In this context, the dissolution behavior of silica particles in the presence of a model protein, bovine serum albumin (BSA), at physiologically relevant pH conditions was studied. Sedimentation analysis using an analytical ultracentrifuge showed that BSA in the supernatant solution is not affected by the presence of silica nanoparticles. However, zeta potential measurements revealed that the presence of the protein alters the particles’ charge state. Adsorption and dissolution studies demonstrated that the presence of the protein significantly enhances the dissolution kinetics via interactions of positively charged amino acids in the protein with the negative silica surface and interaction of BSA with dissolved silicate species. Our study provides comprehensive insights into the complex interactions between proteins and oxide nanoparticles and establishes a reliable protocol paving the way for future investigations in more complex systems involving biological solutions as well as bioactive materials.

Distinctive Adsorption Mechanism and Kinetics of Immunoglobulin G on a Nanoscale Polymer Surface.

Elucidation of protein adsorption beyond simple polymer surfaces to those presenting greater chemical complexity and nanoscopic features is critical to developing well-controlled nanobiomaterials and nanobiosensors. In this study, we repeatedly and faithfully track individual proteins on the same nanodomain areas of a block copolymer (BCP) surface and monitor the adsorption and assembly behavior of a model protein, immunoglobulin G (IgG), over time into a tight surface-packed structure. With discrete protein adsorption events unambiguously visualized at the biomolecular level, the detailed assembly and packing states of IgG on the BCP nanodomain surface are subsequently correlated to various regimes of IgG adsorption kinetic plots. Intriguing features, entirely different from those observed from macroscopic homopolymer templates, are identified from the IgG adsorption isotherms on the nanoscale, chemically varying BCP surface. They include the presence of two Langmuir-like adsorption segments and a nonmonotonic regime in the adsorption plot. Via correlation to time-corresponding topographic data, the unique isotherm features are explained with single biomolecule level details of the IgG adsorption pathway on the BCP. This work not only provides much needed, direct experimental evidence for time-resolved, single protein level, adsorption events on nanoscale polymer surfaces but also signifies mutual linking between specific topographic states of protein adsorption and assembly to particular segments of adsorption isotherms. From the fundamental research viewpoint, the correlative ability to examine the nanoscopic surface organizations of individual proteins and their local as well as global adsorption kinetic profiles will be highly valuable for accurately determining protein assembly mechanisms and interpreting protein adsorption kinetics on nanoscale surfaces. Application-wise, such knowledge will also be important for fundamentally guiding the design and development of biomaterials and biomedical devices that exploit nanoscale polymer architectures.

Environmental Aspects of Oxide Nanoparticles: Probing Oxide Nanoparticle Surface Processes Under Different Environmental Conditions.

Surface chemistry affects the physiochemical properties of nanoparticles in a variety of ways. Therefore, there is great interest in understanding how nanoparticle surfaces evolve under different environmental conditions of pH and temperature. Here, we discuss the use of vibrational spectroscopy as a tool that allows for in situ observations of oxide nanoparticle surfaces and their evolution due to different surface processes. We highlight oxide nanoparticle surface chemistry, either engineered anthropogenic or naturally occurring geochemical nanoparticles, in complex media, with a focus on the impact of (a) pH on adsorption, intermolecular interactions, and conformational changes; (b) surface coatings and coadsorbates on protein adsorption kinetics and protein conformation; (c) surface adsorption on the temperature dependence of protein structure phase changes; and (d) the use of two-dimensional correlation spectroscopy to analyze spectroscopic results for complex systems. An outlook of the field and remaining challenges is also presented.

Mesocellular Silica Foams (MCFs) with Tunable Pore Size as a Support for Lysozyme Immobilization: Adsorption Equilibrium and Kinetics, Biocomposite Properties.

The effect of the porous structure of mesocellular silica foams (MCFs) on the lysozyme (LYS) adsorption capacity, as well as the rate, was studied to design the effective sorbent for potential applications as the carriers of biomolecules. The structural (N2 adsorption/desorption isotherms), textural (SEM, TEM), acid-base (potentiometric titration), adsorption properties, and thermal characteristics of the obtained lysozyme/silica composites were studied. The protein adsorption equilibrium and kinetics showed significant dependence on silica pore size. For instance, LYS adsorption uptake on MCF-6.4 support (pore diameter 6.4 nm) was about 0.29 g/g. The equilibrium loading amount of LYS on MCF-14.5 material (pore size 14.5 nm) increased to 0.55 g/g. However, when the pore diameter was larger than 14.5 nm, the LYS adsorption value systematically decreased with increasing pore size (e.g., for MCF-30.1 was only 0.27 g/g). The electrostatic attractive interactions between the positively charged lysozyme (at pH = 7.4) and the negatively charged silica played a significant role in the immobilization process. The differences in protein adsorption and surface morphology for the biocomposites of various pore sizes were found. The thermal behavior of the studied bio/systems was conducted by TG/DSC/FTIR/MS coupled method. It was found that the thermal degradation of lysozyme/silica composites was a double-stage process in the temperature range 165–420–830 °C.

Fundamental Principles of the Thermodynamics and Kinetics of Protein Adsorption to Material Surfaces

Protein adsorption is important for essentially any process that involves the contact of a protein-containing solution and a material surface, with the resulting formation of the adsorbed layer of protein determined by the thermodynamics and kinetics of the system involved. This paper presents an overview of the fundamentals of these processes. First, the hierarchical structure of proteins and the types of bonding that stabilize a protein’s native-state structure are presented. This section is then followed by a section presenting the thermodynamic driving forces that influence the way that proteins adsorb and conformationally change for three characteristically different types of surface chemistries: nonpolar (hydrophobic) surfaces, neutral hydrophilic surfaces, and charged surfaces. The final section of this paper addresses how kinetics and thermodynamics combine together to influence protein adsorption behavior, followed by concluding remarks.

Recent advances towards single biomolecule level understanding of protein adsorption phenomena unique to nanoscale polymer surfaces with chemical variations

Protein adsorption onto polymer surfaces is a very complex and ubiquitous phenomenon whose integrated process impacts essential applications in our daily lives such as food packaging materials, health devices, diagnostic tools, and medical products. Increasingly, novel polymer materials with greater chemical intricacy and reduced dimensionality are used for various applications involving adsorbed proteins on their surfaces. Hence, the nature of protein-surface interactions to consider is becoming much more complicated than before. A large body of literature exists for protein adsorption. However, most of these investigations have focused on collectively measured, ensemble-averaged protein behaviors that occur on macroscale and chemically unvarying polymer surfaces instead of direct measurements at the single protein or sub-protein level. In addition, interrogations of protein-polymer adsorption boundaries in these studies were typically carried out by indirect methods, whose insights may not be suitably applied for explaining individual protein adsorption processes occurring onto nanostructured, chemically varying polymer surfaces. Therefore, an important gap in our knowledge still exists that needs to be systematically addressed via direct measurement means at the single protein and sub-protein level. Such efforts will require multifaceted experimental and theoretical approaches that can probe multilength scales of protein adsorption, while encompassing both single proteins and their collective ensemble behaviors at the length scale spanning from the nanoscopic all the way to the macroscopic scale. In this review, key research achievements in nanoscale protein adsorption to date will be summarized. Specifically, protein adsorption studies involving polymer surfaces with their defining feature dimensions and associated chemical partitions comparable to the size of individual proteins will be discussed in detail. In this regard, recent works bridging the crucial knowledge gap in protein adsorption will be highlighted. New findings of intriguing protein surface assembly behaviors and adsorption kinetics unique to nanoscale polymer templates will be covered. Single protein and sub-protein level approaches to reveal unique nanoscale protein-polymer surface interactions and protein surface assembly characteristics will be also emphasized. Potential advantages of these research endeavors in laying out fundamentally guided design principles for practical product development will then be discussed. Lastly, important research areas still needed to further narrow the knowledge gap in nanoscale protein adsorption will be identified.

Hydrodynamic Solvent Coupling Effects in Quartz Crystal Microbalance Measurements of Nanoparticle Deposition Kinetics.

Hydrodynamic coupling effects pertinent to quartz crystal microbalance (QCM) investigation of nanoparticle adsorption kinetics were evaluated using atomic force microscopy and the theoretical modeling. Monodisperse polymer particles of the size between 26 and 140 nm and the density of 1.05 g cm–3 were used. The ζ-potential of particles was opposite to the substrate ζ-potential that promoted their irreversible adsorption on the silica sensor. The experimental kinetic data were interpreted in terms of theoretical calculations derived from the hybrid random sequential adsorption model. This allowed us to determine the amount of hydrodynamically coupled solvent (electrolyte) for the absolute particle coverage range up to 0.5. The coupling function representing the ratio of the solvent to the particle volumes was also determined and used to explicitly calculate the solvent level in particle monolayers. It is shown that the solvent level abruptly increases with the particle coverage attaining values comparable with the particle size. One can expect that these results can serve as useful reference data for the interpretation of protein adsorption kinetics on rough surfaces where the presence of stagnant solvent is inevitable.

Protein adsorption measurements on low fouling and ultralow fouling surfaces: A critical comparison of surface characterization techniques

Ultralow protein fouling behavior is a common target for new high-performance materials. Ultralow fouling is often defined based on the amount of irreversibly adsorbed protein (< 5 ng cm−2) measured by a surface ensemble averaging method. However, protein adsorption at solid interfaces is a dynamic process involving multiple steps, which may include adsorption, desorption, and irreversible protein denaturation. In order to better optimize the performance of antifouling surfaces, it is imperative to fully understand how proteins interact with surfaces, including kinetics of adsorption and desorption, conformation, stability, and amount of adsorbed proteins. Defining ultralow fouling surfaces based on a measurement at or near the limit of detection of a surface-averaged measurement may not capture all of this behavior. Single-molecule microscopy techniques can resolve individual protein-surface interactions with high temporal and spatial resolution. This information can be used to tune the properties of surfaces to better resist protein adsorption. In this work, we demonstrate how combining surface plasmon resonance, X-ray photoelectron spectroscopy, atomic force microscopy, and single-molecule localization microscopy provides a more complete picture of protein adsorption on low fouling and ultralow fouling polyelectrolyte multilayer and polymer brush surfaces, over different regimes of protein concentration. In this case, comparing the surfaces using surface plasmon resonance alone is insufficient to rank their resistance to protein adsorption. Our results suggest a revision of the accepted definition of ultralow fouling surfaces is timely: with the advent of time-resolved studies of protein adsorption kinetics at the single-molecule level, it is neither necessary nor sufficient to rely on a surface averaging techniques to qualify ultralow fouling surfaces. Since protein adsorption is a dynamic process, understanding how surface properties affect the kinetics of protein adsorption will enable the design of future generations of advanced antifouling materials. Statement of significanceThe design of ultralow fouling surfaces is often optimized based on a single surface-averaging technique measuring the amount of irreversibly adsorbed protein. This work provides a critical comparison of alternative techniques for evaluating protein adsorption on low fouling and ultralow fouling surfaces, and demonstrates how additional information about the dynamics of protein-surface interactions at the interface can be obtained by application of single-molecule microscopy. This approach could be used to better elucidate mechanisms of protein resistance and design principles for advanced ultralow fouling materials.

Salting Up of Proteins at the Air/Water Interface.

Vibrational sum frequency generation (VSFG) spectroscopy and surface pressure measurements are used to investigate the adsorption of a globular protein, bovine serum albumin (BSA), at the air/water interface with and without the presence of salts. We find at low (2 to 5 ppm) protein concentrations, which is relevant to environmental conditions, both VSFG and surface pressure measurements of BSA behave drastically different from at higher concentrations. Instead of emerging to the surface immediately, as observed at 1000 ppm, protein adsorption kinetics is on the order of tens of minutes at lower concentrations. Most importantly, salts strongly enhance the presence of BSA at the interface. This "salting up" effect differs from the well-known "salting out" effect as it occurs at protein concentrations well-below where "salting out" occurs. The dependence on salt concentration suggests this effect relates to a large extent electrostatic interactions and volume exclusion. Additionally, results from other proteins and the pH dependence of the kinetics indicate that salting up depends on the flexibility of proteins. This initial report demonstrates "salting up" as a new type of salt-driven interfacial phenomenon, which is worthy of continued investigation given the importance of salts in biological and environmental aqueous systems.

Protein cation exchangers derived by charge reversal from poly(ethylenimine)-Sepharose FF: Comparisons between two derivatization routes

It has been known that anion exchangers prepared by grafting poly(ethyleneimine) (PEI) onto Sepharose FF (PEI-Sepharose) at ionic capacities (IC) over 600 mmol/L show both high protein adsorption capacity and uptake kinetics, and charge reversal of PEI-Sepharose by modification with succinic anhydride can produce protein cation exchangers of high capacity and uptake rate. Previously, a Charge Reversal-then-Reduction procedure (route A) was studied for preparation of cation exchangers of different IC values from PEI-Sepharose. In this work, we proposed a new route, that is, Charge Reduction-then-Reversal route (route B), to develop cation exchangers of different IC values from PEI-Sepharose FF with an IC of 700 mmol/L (FF-PEI-L700) as the starting resin. The two kinds of cation exchangers (route A, PEI-L700-CRn; route B, PEI-Rm-Cn) are compared for lysozyme (Lys) adsorption and chromatography. The two modification routes result in the difference in the ligand structures that significantly affect protein adsorption equilibrium and kinetics. Route A introduces long electroneutral groups that hinder protein adsorption and reduce equilibrium capacity. Moreover, charge reversal by reaction with succinic anhydride could cause diamide formation, which reduces remaining carboxyl groups or the IC. In the charge-reduced FF-PEI-Rm resins of the lowest IC (394 mmol/L) prepared in route B, the diamide formation was little due to the lack of primary and secondary amine groups, so its charge reversal makes a higher-IC cation exchanger. This makes PEI-Rm-Cn show a higher IC (589 mmol/L) than PEI-L700-CRn (463 mmol/L) in which De/D0 jumps about four times. The differences in the adsorption equilibrium and kinetics make the two kinds of resins behave distinctly in dynamic adsorption and chromatography. Namely, PEI-Rm-Cn resins display obviously higher dynamic binding capacities than PEI-L700-CRn resins in the IC range studied. For instance, the DBC (at 10% breakthrough) of PEI-R590-C680 (192 mg/mL) is 33% higher than that of PEI-L700-CR680 (144 mg/mL). This is proved by the purification of Lys from chicken egg white solution, in which the PEI-R590-C680 column purified Lys with a recovery yield 14% higher than the PEI-L700-CR680 column. This research thus demonstrated that Charge Reduction-then-Reversal route is superior over Charge Reversal-then-Reduction route in fabricating a high-capacity cation exchanger from PEI-Sepharose.

On adhesion mechanism of salivary pellicle‐PDMS interface

The adsorption behaviour of salivary proteins on polydimethylsiloxane (PDMS) surface was investigated here, aiming to fully understand the interfacial adhesion mechanism. Human whole saliva was derived from a healthy donor. Adsorption kinetics of salivary proteins on PDMS surface was examined by quartz crystal microbalance with dissipation (QCM-D). The morphology and shear energy of the salivary pellicle were characterised using nano-scratch technique, and its adhesion force was measured by means of atomic force microscopy. Results show that a rough but dense viscoelastic pellicle with a high binding strength is formed on the PDMS surface through the adsorption of salivary proteins. Saliva adsorption obviously increases the PDMS surface wettability but has no influence on its zeta potential. The adhesion force of the pellicle is near zero initially, but it increases significantly with the time. In summary, no electrostatic interaction occurs at the salivary pellicle-PDMS interface. The bonding of salivary pellicle to PDMS surface is mainly resulted from hydrophobic interaction and is time-dependent.