Kinetics Of Production Research Articles

Experimental kinetics and thermodynamics investigation: Chemically activated carbon-enriched monolithic reduced graphene oxide for efficient CO2 capture

In this research, we have developed solid MGOs by self-assembled reduction process of GO at 90 °C with different weight ratios of oxalic acid (1:1, 1:0.500, and 1:0.250). The as-synthesized monoliths were carbonized (at 600 °C) and chemically activated with varying proportions of NaOH (1:1, 1:2, and 1:3). This materials offer the CO2 adsorption effect under dynamic conditions, fast mass transfer, easy handling, and outstanding stability throughout the adsorption-desorption cycle. FE-SEM, and HR-TEM analyses confirmed the porous nature and shape of the adsorbents, while XPS examination revealed the presence of distinct functional groups on the surface of the monolith. By increasing the mass ratios (MGO:NaOH) from 1:1 to 1:2, the surface areas increased by approximately 2.6 times, ranging from 520.8 to 753.9 m2 g⁻1 (surface area of the untreated MGO was 289.2 m2 g⁻1). Consequently, this resulted in a notable enhancement of 2.10 mmol g⁻1 in dynamic CO2 capture capacity. The assessment encompassed the evaluation of production yield, selectivity, regenerability, kinetics, equilibrium isotherm, and isosteric temperatures of adsorption (Qst). The decrease in CO2 capture effectiveness with rising adsorption temperature indicated an exothermic and physisorption process. The regenerability of 99.1 % at 100 °C and excellent cyclic stability with efficient CO2 adsorption make this monolithic adsorbent appropriate for post-combustion CO2 capture. The significant Qst lend support to the heterogeneity of the adsorbent's surface, and the pseudo-second-order kinetic model along with the Freundlich isotherm model emerged as the most fitting. Therefore, the current investigation shows that the carbon-enriched adsorbents enhance the CO2 adsorption capacity. It may be used as a low-cost pretreatment method on an industrial scale before carbon capture.

Combination effects of phytonutrient pellet and lemongrass (Cymbopogon citratus) powder on rumen fermentation efficiency and nutrient degradability using in vitro technique.

Phytonutrients (PTN) namely saponins (SP) and condensed tannins (CT) have been demonstrated to assess the effect of rumen fermentation and methane mitigation. Phytonutrient pellet containing mangosteen, rambutan, and banana flower (MARABAC) and lemongrass including PTN, hence these plant-phytonutrients supplementation could be an alternative plant with a positive effect on rumen fermentation. The aim of this experiment was to evaluate the effect of supplementation of MARABAC and lemongrass (Cymbopogon citratus) powder on in vitro fermentation modulation and the ability to mitigate methane production. The treatments were arranged according to a 3 × 3 Factorial arrangement in a completely randomized design. The two experimental factors consisted of MARABAC pellet levels (0%, 1%, and 2% of the total substrate) and lemongrass supplementation levels (0%, 1%, and 2% of the total substrate). The results of this study revealed that supplementation with MARABAC pellet and lemongrass powder significantly improved gas production kinetics (P < 0.01) and rumen fermentation end-products especially the propionate production (P < 0.01). While rumen methane production was subsequently reduced by both factors. Additionally, the in vitro dry matter degradability (IVDMD) and organic matter degradability (IVOMD) were greatly improved (P < 0.05) by the respective treatments. MARABAC pellet and lemongrass powder combination showed effective methane mitigation by enhancing rumen fermentation end-products especially the propionate concentration and both the IVDMD and IVOMD, while mitigated methane production. The combined level of both sources at 2% MARABAC pellet and 2% lemongrass powder of total substrates offered the best results. Therefore, MARABAC pellet and lemongrass powder supplementation could be used as an alternative source of phytonutrient in dietary ruminant.

Pyrolytic characteristics of abutilon stalk waste using TG-FTIR, Py-GC/MS, and artificial neural networks: Kinetics, thermodynamics, and gaseous products distribution

The physicochemical properties of abutilon stalk (ABUS) were investigated to assess its suitability for pyrolytic conversion into bioenergy and bio-based chemicals based on kinetic triplet state, thermodynamic parameters, decomposition mechanisms and product distributions. The pyrolysis behavior of ABUS was studied using a thermogravimetric analyzer at five heating rates in a nitrogen atmosphere. The Gaussian deconvolution function indicated that the pyrolysis process of ABUS can be successfully modeled as four parallel devolatilization events (R2 > 0.99), divided into the devolatilization of pseudo drying (PO-D), hemicellulose (PO-H), cellulose (PO-C), and lignin (PO-L), respectively. The average apparent activation energies were 34.89 kJ/mol for PO-D, 163.02 kJ/mol for PO-H, 169.55 kJ/mol for PO-C, and 107.51 kJ/mol for PO-L using four model-free methods (Ozawa-Flynn-Wall, Kissinger-Akahira-Sunose, Starink, and Tang). The pyrolysis process was accurately predicted using diffusional, power law, geometrical contraction, and order-based reaction mechanism models. Thermal degradation process for each devolatilization event was successfully reconstructed using combined kinetics (R2 > 0.96), providing a useful theoretical basis and mathematical model for predicting the pyrolysis behavior of ABUS. The volatile products produced by ABUS pyrolysis were characterized using an integrated TGA-FTIR and Py-GC/MS system, confirming the proportion of high-energy compounds (benzenes, phenols, ketones, alcohols, aldehydes, acids, esters, hydrocarbons and their derivatives, N-heterocyclic substances, and N-containing compounds) and gas emission levels (CO > CH4 > C-O > H2O > CO2 > CO > C-O(H) > HCN > NH3 > SO2). Artificial neural network (ANN) was used to predict the pyrolysis behaviors of ABUS, and the best ANN model was ANN (5 *11 *1) with high R2 of 0.99998. Based on the kinetics, thermodynamics, and gaseous products distribution, ABUS has great application potential as raw material for bioenergy production.

Enhanced production yields of rVSV-SARS-CoV-2 vaccine using Fibra-Cel® macrocarriers.

The COVID-19 pandemic has led to high global demand for vaccines to safeguard public health. To that end, our institute has developed a recombinant viral vector vaccine utilizing a modified vesicular stomatitis virus (VSV) construct, wherein the G protein of VSV is replaced with the spike protein of SARS-CoV-2 (rVSV-ΔG-spike). Previous studies have demonstrated the production of a VSV-based vaccine in Vero cells adsorbed on Cytodex 1 microcarriers or in suspension. However, the titers were limited by both the carrier surface area and shear forces. Here, we describe the development of a bioprocess for rVSV-ΔG-spike production in serum-free Vero cells using porous Fibra-Cel® macrocarriers in fixed-bed BioBLU®320 5p bioreactors, leading to high-end titers. We identified core factors that significantly improved virus production, such as the kinetics of virus production, the use of macrospargers for oxygen supply, and medium replenishment. Implementing these parameters, among others, in a series of GMP production processes improved the titer yields by at least two orders of magnitude (2e9 PFU/mL) over previously reported values. The developed process was highly effective, repeatable, and robust, creating potent and genetically stable vaccine viruses and introducing new opportunities for application in other viral vaccine platforms.

A Review on Catalytic Progress of Polysulfide Redox Reactions on Transition Metal Sulfides in Li‐S Batteries from Structural Perspective

AbstractThe commercialization of Li−S batteries is seriously hindered by polysulfides with severe shuttle effect, and the inherent insulating properties and slow reaction kinetics of insoluble Li2S products. Transition metal sulfides (TMSs) have a high adsorption capacity for polysulfides and have been shown to have a strong catalytic effect on polysulfide conversion reactions. This paper reviews the research on the application of Unary TMSs, heterostructures, etc. in Li−S batteries, and gives some research methods for TMD catalysts in Li−S batteries. Finally, it points out the main focuses and direction of future Li−S battery research and development. It aims to provide some insights into the design and manufacture of advanced Li−S batteries for commercial use.

Stability and Effects of Protected Palmitic Acid on In Vitro Rumen Degradability and Fermentation in Lactating Goats

Few studies have evaluated the impact of a lipid-rich diet with palmitic acid (PA) in ruminal fermentation. The objective was to evaluate the in vitro bath culture of the protected PA on the ruminal fermentative variables. Four diets were used: (a) without protected PA (nPA) and (b) inclusion of protected PA at three levels: PA3 = 3%, PA6 = 6%, and PA9 = 9% dry matter (DM). The maximum gas production occurred without including protected PA and the low gas production given with the inclusion of protected PA9 (p ≤ 0.05). Meanwhile, the inclusion with 3 and 6% of protected PA showed a higher level of gas production kinetics than the other treatments (p ≤ 0.05). DM and organic matter degradation after 72 h of incubation linearly decreased (p ≤ 0.05) with a high level of protected PA. The level of C16:0 in the protected AP increased with the higher level of supplemented AP (p ≤ 0.05). The best efficiency in propionic acid, decrease in methane, and increase in biohydrogenation (79%) occurred with the inclusion of protected PA3 (p ≤ 0.05). In conclusion, supplements with protected PA at 3 and 6% increased PA availability. The results indicate good benefits of protected PA on fermentative variables, and these doses seem ideal for future research in lactating goats.

In vitro fermentation characteristics of different types of fiber-rich ingredients by pig fecal inoculum.

Dietary fibers with varying physicochemical properties have different fermentation characteristics, which may differently impact host health. The present study aimed to determine the fermentation characteristics including gas production kinetics, short-chain fatty acids (SCFAs) production and microbial composition of different fibrous ingredients using in vitro fermentation by fecal microbiota. Sugar beet pule (SBP), wheat bran (WB), dried corn distillers grains with solubles (DDGS), rice bran (RB) and alfalfa meal (AM) were selected to fermentation in vitro for 36 h. The results showed that SBP had the greatest gas production. SBP had the highest in vitro dry matter fermentability (IVDMF) and production of acetate, propionate and total SCFAs, followed by WB, which were all greater than DDGS, AM and RB. The alpha-diversity was higher in the DDGS, AM and RB groups than in the WB and SBP groups. Differences in microbial community composition were observed among groups. The relative abundance of Treponema was highest in WB group. RB group showed lower Prevotella abundance than other groups but had higher Succinivibrio abundance. Interestingly, the Lactobacillus reached the highest abundances in the DDGS group. Correlation analysis indicated that the relative abundance of Treponema and Prevotella was positively associated with the gas production, IVDMF and SCFAs, whereas norank_f_Muribaculaceae, Rikenellaceae_RC9_gut_group, Lysinibacillus and Succinivibrio were the opposite. Collectively, WB and SBP were fermented rapidly by fecal microbiota compared to DDGS, AM and RB. Different fiber sources have different fiber compositions and fermentation properties that affect the microbial compositins and SCFAs production. © 2024 Society of Chemical Industry.

Optimizing Oxygen-Production Kinetics of Manganese Dioxide Nanoparticles Improves Hypoxia Reversal and Survival in Mice with Bone Metastases.

Persistent hypoxia in bone metastases induces an immunosuppressive environment, limiting the effectiveness of immunotherapies. To address chronic hypoxia, we have developed manganese dioxide (MnO2) nanoparticles with tunable oxygen production kinetics for sustained oxygenation in bone metastases lesions. Using polyethylene glycol (PEG)-stabilized MnO2 or poly(lactic[50]-co-glycolic[50] acid) (50:50 PLGA), poly(lactic[75]-co-glycolic[25] acid) (75:25 PLGA), and polylactic acid (PLA)-encapsulated MnO2 NPs, we demonstrate that polymer hydrophobicity attenuates burst oxygen production and enables tunable oxygen production kinetics. The PEG-MnO2 NPs resulted in rapid hypoxia reduction in spheroids, which was rapidly attenuated, while the PLA-MnO2 NPs exhibited delayed hypoxia control in cancer spheroids. The 50:50 PLGA-MnO2 NPs exhibited the best short- and long-term control of hypoxia in cancer spheroids, resulting in sustained regulation of the expression of HIF-1α and immunosuppressive genes. The sustained control of hypoxia by the 50:50 PLGA-MnO2 NPs enhanced the cytotoxicity of natural killer cells against cancer spheroids. In vivo, 50:50 PLGA-MnO2 showed greater accumulation in the long bones and pelvis, common sites for bone metastases. The NPs decreased hypoxia in bone metastases and decreased regulatory T cell levels, resulting in enhanced survival of mice with established bone metastases.

Noble Metal Nanoparticles with Nanogel Coatings: Coinage Metal Thiolate-Stabilized Glutathione Hydrogel Shells.

Developing biocompatible nanocoatings is crucial for biomedical applications. Noble metal colloidal nanoparticles with biomolecular shells are thought to combine diverse chemical and optothermal functionalities with biocompatibility. Herein, we present nanoparticles with peptide hydrogel shells that feature an unusual combination of properties: the metal core possesses localized plasmon resonance, whereas a few-nanometer-thick shells open opportunities to employ their soft framework for loading and scaffolding. We demonstrate this concept with gold and silver nanoparticles capped by glutathione peptides stacked into parallel β-sheets as they aggregate on the surface. A key role in the formation of the ordered structure is played by coinage metal(I) thiolates, i.e., Ag(I), Cu(I), and Au(I). The shell thickness can be controlled via the concentration of either metal ions or peptides. Theoretical modeling of the shell's molecular structure suggests that the thiolates have a similar conformation for all the metals and that the parallel β-sheet-like structure is a kinetic product of the peptide aggregation. Using third-order nonlinear two-dimensional infrared spectroscopy, we revealed that the ordered secondary structure is similar to the bulk hydrogels of the coinage metal thiolates of glutathione, which also consist of aggregated stacked parallel β-sheets. We expect that nanoparticles with hydrogel shells will be useful additions to the nanomaterial toolbox. The present method of nanogel coating can be applied to arbitrary surfaces where the initial deposition of the seed glutathione monolayer is possible.

Water-Degradable Oxygen-Rich Polymers with AB/ABB Units from Fast and Selective Copolymerization.

Researchers have been chasing plastics that can automatically and fully degrade into valuable products under natural conditions. Here, we develop a series of water-degradable polymers from the first reported fast and selective cationic copolymerization of formaldehyde (B) with cyclic anhydrides (A). In addition to readily accessible monomers, the method is performed at industrially relevant temperatures (~100 °C), takes tens or even minutes, and uses common acid as the catalyst. Interestingly, such polymers possess tunable AB/ABB-type repeating units, which are considered to be thermodynamic and kinetic products, respectively, resulting in low carbon content ([O] : [C] up to 1 : 1). Notably, the polymers can completely degrade to valuable diacids within 150 days in water at ambient temperature owing to the incorporation of carboxyl terminals and acid-responsive acetal units. By washing with aqueous sodium carbonate, the polymers are relatively stable over several months.

Water‐Degradable Oxygen‐Rich Polymers with AB/ABB Units from Fast and Selective Copolymerization

AbstractResearchers have been chasing plastics that can automatically and fully degrade into valuable products under natural conditions. Here, we develop a series of water‐degradable polymers from the first reported fast and selective cationic copolymerization of formaldehyde (B) with cyclic anhydrides (A). In addition to readily accessible monomers, the method is performed at industrially relevant temperatures (~100 °C), takes tens or even minutes, and uses common acid as the catalyst. Interestingly, such polymers possess tunable AB/ABB‐type repeating units, which are considered to be thermodynamic and kinetic products, respectively, resulting in low carbon content ([O] : [C] up to 1 : 1). Notably, the polymers can completely degrade to valuable diacids within 150 days in water at ambient temperature owing to the incorporation of carboxyl terminals and acid‐responsive acetal units. By washing with aqueous sodium carbonate, the polymers are relatively stable over several months.

Evaluation of Foot-and-Mouth Disease (FMD) Virus Asia1 Genotype-V as an FMD Vaccine Candidate: Study on Vaccine Antigen Production Yield and Inactivation Kinetics.

South Korea has experienced outbreaks of foot-and-mouth disease (FMD) of serotypes O and A, leading to nationwide vaccination with a bivalent vaccine. Since the FMD virus (FMDV) Asia1 group-V genotype occurred in North Korea in 2007, an Asia1/MOG/05 vaccine strain belonging to the Asia1 group-V genotype was developed using a genetic recombination method (Asia1/MOG/05-R). This study aimed to evaluate the antigen productivity and viral inactivation kinetics of Asia1/MOG/05-R to assess its commercial viability. The antigen yield of Asia1/MOG/05-R produced in flasks and bioreactors was approximately 4.0 μg/mL. Binary ethylenimine (BEI) inactivation kinetics of Asia1/MOG/05-R showed that 2 mM and 1.0 mM BEI treatment at 26 °C and 37 °C, respectively, resulted in a virus titer <10-7 TCID50/mL within 24 h, meeting the inactivation kinetics criteria. During incubation at 26 °C and 37 °C, 10% antigen loss occurred, but not due to BEI treatment. When pigs were inoculated twice with the Asia1/MOG/05-R antigen, the virus neutralization titer increased to approximately 1:1000; therefore, it can sufficiently protect against Asia1/MOG/05-R and Asia1 Shamir viruses. The Asia1/MOG/05-R will be useful as a vaccine strain for domestic antigen banks.

Deuterium retention and ammonia production from D-implanted 316 L stainless steel: insights for future fusion reactors

We present a systematic study that quantifies deuterium (D) retention and ammonia (ND3) production from 316 L stainless steel (SS316L) following the implantation of D ions in conditions similar to the ones expected in the ITER tokamak, i.e. with kinetic energy below 300 eV. Using Temperature Programmed Desorption (TPD) after deuterium ion implantation at 250 eV/D, we show that deuterium retention increases linearly with the D fluence up to 1021 D+m−2, with a retention probability of 18%. For higher D fluence, deuterium retention increases sub-linearly. Analysis of the TPD spectra evolution with varying storage time in vacuum after D implantation, shows that D retention is influenced by D diffusion into the bulk of SS316L. Subsequent to D ion implantation, we evidence the efficient production of ND3 molecules during TPD, between 400 K and 750 K, from the nitrogen present naturally in SS316L. Up to 21% of the D release during TPD can be found in ND3 molecules, indeed. The fraction of ND3 in the total D release depends both on the D ion fluence and the nitrogen concentration profile in the bulk. At least 7% of the D release is found in the form of ND3 molecules, even at a fluence of 2 × 1021 D+m−2 and for a natural N concentration bulk profile. Both N diffusion and D diffusion into the bulk appear to dictate the kinetics of ND3 production. Our findings of efficient production of ND3 in D-implanted austenitic 316 L stainless steel underline the need for similar studies on reduced-activation ferritic/martensitic (RAFM) steels that contain similar content of nitrogen and will be used in fusion reactor prototypes.

Effect of hydroxypropyl methylcellulose (HPMC) hard capsules on in vitro rumen fermentation kinetics of commonly used feeds in ruminant feeding.

Accurate dosing of feed additives is often required to evaluate their effects on rumen fermentation. This can be done using soluble but nonfermentable hydroxypropyl methylcellulose (HPMC) hard capsules. The aim of the study was to evaluate the effect of HPMC hard capsules on the extent and rate of in vitro gas production in eleven feeds. Six high-fibre feeds and five concentrates, were weighed into syringes either directly or into HPMC capsules and incubated anaerobically in 30mL buffered rumen fluid at 39°C. Data obtained from gas production measurements were fitted using the Gompertz model to obtain kinetic parameters for gas production. HPMC hard capsules had no effect on the gas production of the blank sample and concentrate feeds. In contrast, high-fibre feeds weighed in HPMC showed a significant decrease (p < 0.05) in total gas production and gas produced within 24 h of incubation. The use of HPMC hard capsules was found to be inappropriate for determining gas production kinetics because fermentation subsides at a certain point when peak fermentation is reached (at TMFR), resulting in a decrease in both total potential gas production and gas production within 24 h of incubation. This is particularly evident when high-fibre feeds are incubated.

Phenotypic and molecular differentiation of lactic acid bacteria in fonio millet ogi fermentation and their potential as starter cultures

This study focused on the phenotypic and 16S rRNA characterization of lactic acid bacteria (LAB) isolated from spontaneously fermented fonio ogi and evaluation of their starter cultures potentials. The isolates were screened for biochemical characteristics, acidification, organic acid production and growth kinetics. Phenotypically, LABs (n = 28) were identified to be inclusive of Lactiplantibacillus plantarum, Lactiplantibacillus pentosus, Limosilactobacillus fermentum and Pediococcus species. However, genotypic typing revealed the strains as Lactiplantibacillus plantarum, Levilactobacillus brevis, and Pediococcus pentosaceus well as presence of non lactobacillus strains. Suitability for starter cultures revealed higher acidification and organic acid production for strains of Lactiplantibacillus plantarum and Pediococcus pentosaceus to between 3.20–3.65 (pH); 4.67- 6.67 total titratable acidity (TTA); 46.4 − 57.4 mg/g (lactic acid), 0.27–0.36 h (maximum specific growth rate). The selected LABs were shown to be strain specific and strains with rapid rate of acidification, high organic acid production and low pH exhibited significant potential for starter culture.

An efficient molten‐salt electro‐deoxidation strategy enabling fast‐kinetics and long‐life aluminum–selenium batteries

AbstractAluminum–selenium (Al–Se) batteries have been considered as one of the most promising energy storage systems owing to their high capacity, energy density, and cost effectiveness, but Se falls challenges in addressing the shuttle effect of soluble intermediate product and sluggish reaction kinetics in the solid–solid conversion process during cycling. Herein, we propose an unprecedented design concept for fabricating uniform Se/C hollow microspheres with controllable morphologies through low‐temperature electro‐deoxidation in neutral NaCl–AlCl3 molten salt system. Such Se/C hollow microspheres are demonstrated to hold a favorable hollow structure for hosting Se, which can not only suppress the dissolution of soluble intermediate products into the electrolyte, thereby maintaining the structural integrity and maximizing Se utilization of the active material, but also promote the electrical/ionic conductivity, thus facilitating the rapid reaction kinetics during cycling. Accordingly, the as‐prepared Se/C hollow microspheres exhibit a high reversible capacity of 720.1 mAh g−1 at 500 mA g−1. Even at the high current density of 1000 mA g−1, Se/C delivers a high discharge capacity of 564.0 mAh g−1, long‐term stability over 1100 cycles and high Coulombic efficiency of 98.6%. This present work provides valuable insights into short‐process recovery of advanced Se‐containing materials and value‐added utilization for energy storage.

Correlation between kinetic parameters, reactor performance, and biogas and methane potential of co-digestion and mono-digestion of active sludge and olive mill wastewater

Abstract Anaerobic co-digestion(AcoD) of active sludge (AS) and olive mill wastewater (OMW) is becoming an increasingly recognized alternative to manage waste and generate renewable energy. A kinetic study of the performance of biochemical methane potential (BMP) and continuous stirred tank reactors (CSTR) bioreactors was conducted to identify critical parameters influencing. Substrates of 100%OMW, 100%AS, 25:75%, 75:25%, and 50:50 were utilized in the BMP and CSTR digesters. To identify the optimum mixing, BMP tests were conducted under three different operating conditions: no mixing (NM), low-continuous mixing intensity (LM) of 25 rpm, and high continuous mixing intensity (HM) of 60 rpm. CSTR with an optimum mixing regime is utilized to identify the optimum substrate. In particular, the removal efficiency of volatile solids (VSs), total chemical oxygen demand (TCOD), and the production of biogas and methane (CH4) were investigated to specify the performance of the anaerobic digestion (AD) process. The results revealed that the optimum mixing regime is LM with BMP tests. Also, the maximum performance in CSTR-ML was achieved by 75:25 AS:OMW, 0.339 Nm3/kg VS of biogas, 69.89% of CH4, and a removal efficiency of 87.12% of VS and 79.23% of TCOD. For BMP tests, the biogas and CH4 yield production kinetics were best fitted by the modified Gompertz models: mono-digestion and co-digestion 75:25 and 50:50 of AS:OMW, while the best-fit model for co-digestion 25:75 was achieved by the transfer model. The production kinetics were well described by modified Gompertz models in CSTR tests. These results point to the possibility of optimizing digester systems on a wide scale using the outputs that have been observed. Novelty statement. This research work provides novel insights into the performance of the digester under diverse mixing conditions and varying co-substrate concentrations of AS:OMW and presents the best model to predicate the biogas and CH4 at various operation conditions.

Difference in the cellular response following THP-1 derived phagocytic monocyte cells exposure to commercial aluminum-based adjuvants and aluminum-containing vaccines

BackgroundAluminum-based adjuvants (ABAs) enhance the immune response following vaccine injection. Their mechanisms of action are not fully understood, and their bio-persistency have been described associated with long-term adverse effects. MethodsWe evaluated and compared the cellular effects of the two main ABAs and whole vaccines on ATP production, ROS generation and cytokines production (IL-6 and IL-10), using THP-1 cells. ResultsABAs altered the cell energy metabolism by increasing ROS production after 24 h and reducing ATP production after 48 h. In addition, both ABAs and whole vaccines induced different kinetics of IL-6 production, whereas only ABAs induced IL-10 secretion. ConclusionThis study showed clearly, for a first time, a difference in cellular response to the ABAs and whole vaccines which should be taken into consideration in future studies focusing on the effect of ABA in vaccines. Future studies on ABAs should also pay attention to mitochondrial function alterations following exposure to ABA-containing vaccines.

The Study on Timolol and Its Potential Phototoxicity Using Chemical, In Silico and In Vitro Methods.

Timolol (TIM) is a non-selective ß-adrenergic receptor antagonist used orally for the treatment of hypertension and heart attacks, and topically for treating glaucoma; lately, it has also been used in some specific dermatological problems. In the present study, its photodegradation and potential risk of phototoxicity were examined using chemical, in silico and in vitro methods. The UV/VIS irradiated solutions of TIM at pH 1-13 were subjected to LC-UV and UPLC-HRMS/MS analyses showing pseudo first-order kinetics of degradation and several degradation products. The structures of these photodegradants were elucidated by fragmentation path analysis based on high resolution (HR) fragmentation mass spectra, and then used for toxicity evaluation using OSIRIS Property Explorer and Toxtree. Potential risk of phototoxicity was also studied using chemical tests for detecting ROS under UV/VIS irradiation and in vitro tests on BALB/c 3T3 mouse fibroblasts (MTT, NRU and Live/Dead tests). TIM was shown to be potentially phototoxic because of its UV/VIS absorptive properties and generation ROS during irradiation. As was observed in the MTT and NRU tests, the co-treatment of fibroblasts with TIM and UV/VIS light inhibited cell viability, especially when concentrations of the drug were higher than 50 µg/mL.

Exploring xylose metabolism in non-conventional yeasts: kinetic characterization and product accumulation under different aeration conditions.

This work aims to expand the knowledge of xylose utilization in different yeast species, with a focus on how oxygenation impacts xylose assimilation.