Kinetics Of Biofilm Formation Research Articles

Insights into Cystic Fibrosis Polymicrobial Consortia: The Role of Species Interactions in Biofilm Development, Phenotype, and Response to In-Use Antibiotics

Cystic Fibrosis (CF) airways disease involves complex polymicrobial infections where different bacterial species can interact and influence each other and/or even interfere with the whole community. To gain insights into the role that interactions between Pseudomonas aeruginosa in co-culture with Staphylococcus aureus, Inquilinus limosus, and Stenotrophomonas maltophilia may play in infection, the reciprocal effect during biofilm formation and the response of dual biofilms toward ciprofloxacin under in vitro atmospheres with different oxygen availabilities were evaluated. Biofilm formation kinetics showed that the growth of S. aureus, I. limosus, and S. maltophilia was disturbed in the presence of P. aeruginosa, under both aerobic and anaerobic environments. On the other hand, under aerobic conditions, I. limosus led to a decrease in biofilm mass production by P. aeruginosa, although biofilm-cells viability remains unaltered. The interaction between S. maltophilia and P. aeruginosa positively influenced dual biofilm development by increasing its biomass. Compared with monocultures, biomass of P. aeruginosa+ S. aureus biofilms was significantly reduced by reciprocal interference. When grown in dual biofilms with P. aeruginosa, ciprofloxacin was less effective against S. aureus, I. limosus, and S. maltophilia, with increasing antibiotic doses leading to drastic inhibitions of P. aeruginosa cultivability. Therefore, P. aeruginosa might be responsible for the protection of the whole dual consortia against ciprofloxacin activity. Based on the overall data, it can be speculated that reciprocal interferences occur between the different bacterial species in CF lung, regardless the level of oxygen. The findings also suggest that alterations of bacterial behavior due to species interplay may be important for disease progression in CF infection.

Temperature, pH and Trimethoprim-Sulfamethoxazole Are Potent Inhibitors of Biofilm Formation by Stenotrophomonas maltophilia Clinical Isolates.

Stenotrophomonas maltophilia, an opportunistic pathogen usually connected with healthcare-associated infections, is an environmental bacterium. Intrinsic resistance to multiple antibiotics, with different virulence determinants in the last decade classified this bacterium in the group of global multiple drug resistant (MDR) organism. S. maltophilia clinical isolates, were collected from tertiary care pediatric hospital in Belgrade, Serbia to investigate influence of different factors on biofilm formation, kinetics of biofilm formation for strong biofilm producers and effect of trimethoprim-sulfamethoxazole (TMP/SMX) on formed biofilm. Most of the isolates (89.8%) were able to form a biofilm. Analysis of biofilm formation in different growth conditions showed that changing of temeperature and pH had the stronggest effect on biofilm formation almost equally in group of cystic fibrosis (CF) and non-CF strains. TMP/SMX in concentration of 50 μg/ml reduced completely 24 h old biofilms while concentration of 25 μg/ml effects formed biofilms in a strain dependent manner. Among strains able to form strong biofilm CF isolates formed biofilm slower than non-CF isolates, while shaking conditions did not affect biofilm formation. Swimming motility was detected in both CF and non-CF isolates, however more motile strain formed stronger biofilms. This study suggests that temperature, pH and TMP/SMX had the strongest influence on biofilm formation in analyzed collection of S. maltophilia. A positive correlation between motility and strength of formed biofilm was demonstrated.

Biofilms of vaginal Lactobacillus reuteri CRL 1324 and Lactobacillus rhamnosus CRL 1332: kinetics of formation and matrix characterization.

Adhesion and biofilm formation are strain properties that reportedly contribute to the permanence of lactobacilli in the human vagina. The kinetics of biofilm formation and the chemical nature of the biofilm matrix formed by Lactobacillus reuteri CRL (Centro de Referencia para Lactobacilos Culture Collection) 1324 and Lactobacillus rhamnosus CRL 1332, vaginal beneficial strains, were evaluated in this work. Crystal violet-stained microplate assay and techniques of epifluorescence, electron and confocal microscopy were applied. The highest density and complexity of biofilms of both vaginal lactobacilli were observed at 72h of incubation. Protease, proteinase K, α-chymotrypsin and trypsin treatments efficiently detached L. reuteri CRL 1324 biofilm that was also partially affected by α-amylase. However, L. rhamnosus CRL 1332 biofilm was slightly affected by protease, proteinase K and α-amylase. Confocal microscopy revealed greater amount of polysaccharides in L. rhamnosus CRL 1332 biofilm matrix than in L. reuteri CRL 1324 biofilm matrix. The results indicate that proteins are one of the main components of the L. reuteri CRL 1324 biofilm, while the biofilm matrix of L. rhamnosus CRL 1332 is composed of carbohydrates and proteins. The results obtained support the knowledge, understanding and characterization of two biofilm-forming vaginal Lactobacillus strains.

English

The pathogenic potential of Pseudomonas aeruginosa comes from the expression of many secreted and cell surface virulence factors, and its biofilm formation. This study aimed to investigate and compare the virulence profiles of 123 clinical and environmental P. aeruginosa isolated in Meknes (Morocco). Using suitable culture media, phenotypic screening evaluated the production of β-haemolysin, caseinase, lipase, lecithinase, pyocyanin and pyoverdin, as well as the ability to swim, swarm and twitch. Biofilm formation kinetics was assessed using microtiter test plates. Data analysis was performed using Statistic Package of the Social Science software (version 21.0). High percentages of strains expressed caseinase (99.2%), β-heamolysin (95.1%), lipase (100%) and lecithinase (100%). 95.9% of isolates produced either pigment. All strains were able to swim, warm and twitch, at different levels. All strains were biofilm producers, and the evolution of adherent biomass over time varies greatly from strain to strain. Significant positive correlations were observed between proteolytic and hemolytic activities; biofilm formation and twitching; as well as swimming, swarming and twitching motilities. Twitching and swimming were significantly higher in environmental strains, which were also quickly adhered and formed denser biofilms. Clinical strains showing significantly higher proteolytic activity were isolated from cardiology ward, and those with higher twitching and denser biofilm were from the thoracic service. Inpatient strains were significantly earlier producer of denser biofilm than outpatient ones. P. aeruginosa strains tested have a collection of virulence markers required to cause disease in different tissues. Such bacteria present a serious therapeutic challenge for treatment of both community-acquired and nosocomial infections. Key words: Biofilm, clinical, environmental, Pseudomonas aeruginosa, virulence factors.

The BioFilm Ring Test: a Rapid Method for Routine Analysis of Pseudomonas aeruginosa Biofilm Formation Kinetics.

Currently, few techniques are available for the evaluation of bacterial biofilm adhesion. These detection tools generally require time for culture and/or arduous handling steps. In this work, the BioFilm Ring Test (BRT), a new technology, was used to estimate the biofilm formation kinetics of 25 strains of Pseudomonas aeruginosa, isolated from the sputum of cystic fibrosis (CF) patients. The principle of the new assay is based on the mobility measurement of magnetic microbeads mixed with a bacterial suspension in a polystyrene microplate. If free to move under the magnetic action, particles gather to a visible central spot in the well bottom. Therefore, the absence of spot formation in the plate reflects the bead immobilization by a biofilm in formation. The BRT device allowed us to classify the bacterial strains into three general adhesion profiles. Group 1 consists of bacteria, which are able to form a solid biofilm in <2 h. Group 2 comprises the strains that progressively set up a biofilm during 24 h. Lastly, group 3 includes the strains that stay in a planktonic form. The grouping of our strains did not differ according to culture conditions, i.e., the use of different sets of beads or culture media. The BRT is shown to be an informative tool for the characterization of biofilm-forming bacteria. Various application perspectives may be investigated for this device, such as the addition of antibiotics to the bacterial suspension to select which would have the ability to inhibit the biofilm formation.

Kinetics of biofilm formation by drinking water isolated Penicillium expansum

Current knowledge on drinking water (DW) biofilms has been obtained mainly from studies on bacterial biofilms. Very few reports on filamentous fungi (ff) biofilms are available, although they can contribute to the reduction in DW quality. This study aimed to assess the dynamics of biofilm formation by Penicillium expansum using microtiter plates under static conditions, mimicking water flow behaviour in stagnant regions of drinking water distribution systems. Biofilms were analysed in terms of biomass (crystal violet staining), metabolic activity (resazurin, fluorescein diacetate and 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide [MTT]) and morphology (epifluorescence [calcofluor white M2R, FUN-1, FDA and acridine orange] and bright-field microscopies). Biofilm development over time showed the typical sigmoidal curve with noticeable different phases in biofilm formation (induction, exponential, stationary, and sloughing off). The methods used to assess metabolic activity provided similar results. The microscope analysis allowed identification of the involvement of conidia in initial adhesion (4 h), germlings (8 h), initial monolayers (12 h), a monolayer of intertwined hyphae (24 h), mycelial development, hyphal layering and bundling, and development of the mature biofilms (≥48 h). P. expansum grows as a complex, multicellular biofilm in 48 h. The metabolic activity and biomass of the fungal biofilms were shown to increase over time and a correlation between metabolism, biofilm mass and hyphal development was found.

Kinetics of biofilm formation and desiccation survival of Listeria monocytogenes in single and dual species biofilms with Pseudomonas fluorescens, Serratia proteamaculans or Shewanella baltica on food-grade stainless steel surfaces

This study investigated the dynamics of static biofilm formation (100% RH, 15 °C, 48–72 h) and desiccation survival (43% RH, 15 °C, 21 days) of Listeria monocytogenes, in dual species biofilms with the common spoilage bacteria, Pseudomonas fluorescens, Serratia proteamaculans and Shewanella baltica, on the surface of food grade stainless steel. The Gram-negative bacteria reduced the maximum biofilm population of L. monocytogenes in dual species biofilms and increased its inactivation during desiccation. However, due to the higher desiccation resistance of Listeria relative to P. fluorescens and S. baltica, the pathogen survived in greater final numbers. In contrast, S. proteamaculans outcompeted the pathogen during the biofilm formation and exhibited similar desiccation survival, causing the N21 days of Serratia to be ca 3 Log10(CFU cm−2) greater than that of Listeria in the dual species biofilm. Microscopy revealed biofilm morphologies with variable amounts of exopolymeric substance and the presence of separate microcolonies. Under these simulated food plant conditions, the fate of L. monocytogenes during formation of mixed biofilms and desiccation depended on the implicit characteristics of the co-cultured bacterium.

Biofilm formation by oral clinical isolates of Candida species

We have conducted a longitudinal study to quantify biofilms in oral clinical isolates of Candida species (spp.) from adults with local and systemic predisposing factors for candidiasis. A total of 69 yeast isolates from 63 Mexican patients were evaluated. These isolates (39 C. albicans, 15 C. tropicalis, 7 C. glabrata, 4 C. krusei, 1 C. lusitaniae, 1 C. kefyr, 1 C. guilliermondii and 1 C. pulcherrima) were obtained from two clinical sites: 62.3% (n=43) from the oral mucosa of totally and partially edentulous patients, and 37.7% (n=26) from the oral mucosa of diabetics. In addition, Candida ATCC strains were used as controls for each experiment. The kinetics of biofilm formation were measured by 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino)carbonyl]-2H-tetrazolium hydroxide [XTT] reduction; each isolate was tested at 6, 12 and 24h. Biofilm formation is dependent on the Candida spp. and its clinical origin. On average, the oral isolates of C. glabrata are strong biofilm producers, whereas C. albicans and C. tropicalis are moderate producers. The most common species in our population was C. albicans. While the kinetics of C. albicans biofilm formation varies between oral isolates, it generally maintains steady growth from 2 to 48h, when it reaches its maximum growth.

Biofilm formation by Candida albicans on various prosthetic materials and its fluconazole sensitivity: a kinetic study

Candida albicans has the ability to colonize various materials used in prostheses. In this report, we have studied the kinetics of biofilm formation on prosthetic materials and their susceptibility to fluconazole at various stages of development. Results indicated that C. albicans efficiently adheres to and colonizes polystyrene, polyvinylchloride, silicon, and polycarbonate surfaces. Candida albicans biofilm formation was observed to be both strainand substrate dependent. Adhesion of cells to solid substrates was found sufficient to induce fluconazole resistance. Drug susceptibility at different stages of biofilm growth showed that Candida biofilms on these substrates are highly resistant to fluconazole. The study focuses on the limitations of fluconazole to combat biofilm-related infections and emphasizes the need for better therapeutic strategies against prosthesis-associated C. albicans infections.

Biofilm formation by &lt;i&gt;Candida albicans&lt;/i&gt; on various prosthetic materials and its fluconazole sensitivity: a kinetic study

Candida albicans has the ability to colonize various materials used in prostheses. In this report, we have studied the kinetics of biofilm formation on prosthetic materials and their susceptibility to fluconazole at various stages of development. Results indicated that C. albicans efficiently adheres to and colonizes polystyrene, polyvinylchloride, silicon, and polycarbonate surfaces. Candida albicans biofilm formation was observed to be both strainand substrate dependent. Adhesion of cells to solid substrates was found sufficient to induce fluconazole resistance. Drug susceptibility at different stages of biofilm growth showed that Candida biofilms on these substrates are highly resistant to fluconazole. The study focuses on the limitations of fluconazole to combat biofilm-related infections and emphasizes the need for better therapeutic strategies against prosthesis-associated C. albicans infections.

Comparison of adhesivity and biofilm formation among different Candida species

Objective To assess the relationship between Candida adhesivity and biofilm formation. Methods Eight Candida strains belonging to 8 species and 1 Saccharomyces cerevisiae strain were cultured in yeast peptone dextrose (YPD) fluid and agar medium respectively. The flocculation and adhesion of Candida were observed. Candida biofilm models were developed in 96-well microculture plates. The kinetics of biofilm formation was measured. Results All the 9 fungal strains had flocculation capability and could adhere to the surface of the yeast peptone dextrose agar medium. After mild shaking of the fluid medium, it is difficult for C. albicans, C. kefyr, C. glabrata and C. tropicalis to resuspend, but easy for Saccharomyces cerevisiae. The adhesivity of C. albicans, C. kefyr, C. glabrata and C. tropicalis was stronger than that of the other Candida strains. Common pathogenic Candida strains could form biofilm, and the metabolic activity of Candida cells in the biofilm increased over time. A significant increment was observed in the ability of C. albicans and C. kefyr to form biofilm compared with the other species (all P ＜ 0.05), and in that of C. tropicalis and C. glabrata compared with C. krusei, C. parapsilosis and C. gulliermondii (all P ＜ 0.05). The nonpathogenic Saccharomyces cerevisiae could not form biofilm. Conclusions Candida has the ability to adhere and form biofilm,and the ability varies with Candida species. Moreover, the ability to form biofilm positively correlates with the adhesivity of Candida. Key words: Candida; Biofilms; Cell adhesion; Precipitation

Different, overlapping mechanisms for colonization of abiotic and plant surfaces byPseudomonas putida

Mechanisms governing biofilm formation have generated considerable interest in recent years, yet comparative analyses of processes for bacterial establishment on abiotic and biotic surfaces are still limited. In this report we have expanded previous information on the genetic determinants required for colonization of plant surfaces by Pseudomonas putida populations and analyzed their correlation with biofilm formation processes on abiotic surfaces. Insertional mutations affecting flagellar genes or the synthesis and transport of the large adhesin LapA lead to decreased adhesion to seeds and biofilm formation on abiotic surfaces. The latter also causes reduced fitness in the rhizosphere. Decreased seed adhesion and altered biofilm formation kinetics are observed in mutants affected in heme biosynthesis and a gene that might participate in oxidative stress responses, whereas a mutant in a gene involved in cytochrome oxidase assembly is affected in the bacterium-plant interaction but not in bacterial establishment on abiotic surfaces. Finally, a mutant altered in lipopolysaccharide biosynthesis is impaired in seed and root colonization but seems to initiate attachment to plastic faster than the wild type. This variety of phenotypes reflects the complexity of bacterial adaptation to sessile life, and the partial overlap between mechanisms leading to biofilm formation on abiotic and biotic surfaces.

Biofilm formation and partial biodegradation of polystyrene by the actinomycete Rhodococcus ruber

Polystyrene, which is one of the most utilized thermoplastics, is highly durable and is considered to be non-biodegradable. Hence, polystyrene waste accumulates in the environment posing an increasing ecological threat. In a previous study we have isolated a biofilm-producing strain (C208) of the actinomycete Rhodococcus ruber that degraded polyethylene films. Formation of biofilm, by C208, improved the biodegradation of polyethylene. Consequently, the present study aimed at monitoring the kinetics of biofilm formation by C208 on polystyrene, determining the physiological activity of the biofilm and analyzing its capacity to degrade polystyrene. Quantification of the biofilm biomass was performed using a modified crystal violet (CV) staining or by monitoring the protein content in the biofilm. When cultured on polystyrene flakes, most of the bacterial cells adhered to the polystyrene surface within few hours, forming a biofilm. The growth of the on polystyrene showed a pattern similar to that of a planktonic culture. Furthermore, the respiration rate, of the biofilm, exhibited a pattern similar to that of the biofilm growth. In contrast, the respiration activity of the planktonic population showed a constant decline with time. Addition of mineral oil (0.005% w/v), but not non-ionic surfactants, increased the biofilm biomass. Extended incubation of the biofilm for up to 8 weeks resulted in a small reduction in the polystyrene weight (0.8% of gravimetric weight loss). This study demonstrates the high affinity of C208 to polystyrene which lead to biofilm formation and, presumably, induced partial biodegradation.

Adherence and kinetics of biofilm formation of Staphylococcus epidermidis to different types of intraocular lenses under dynamic flow conditions

To compare the adherence and biofilm formation of Staphylococcus epidermidis under in vitro flow conditions on intraocular lenses (IOLs) made of 4 biomaterials: poly(methyl methacrylate) (PMMA), silicone, hydrophilic acrylic, and hydrophobic acrylic. Department of Ophthalmology, Croix-Rousse University Hospital and University Research Laboratory, Lyon, France. Intraocular lenses were placed in a bioreactor designed to replicate intraocular conditions. The model consisted of Tygon tubing connected to a vial. Three septa allowed the entry and elimination of the artificial aqueous humor and inoculation of the bacterial suspension. The first of 2 pumps moved the aqueous humor along the circuit; the second pump regulated the flow at which the nutritive environment was regenerated. At various times (12, 16, 24, 40, 48, 60, and 72 hours), IOLs were taken from this environment and the bound bacteria were removed and counted. The distribution of bacterial adhesion on the IOLs was modeled using polynomial Poisson regression. To test the effect of the IOL biomaterial on bacterial adhesion, likelihood ratio tests were performed. The model provided the kinetics of S epidermidis biofilm growth on IOLs. The biofilm growth on each of the 4 biomaterials occurred in 3 phases: latent, dynamic or accelerated growth, and linear growth. The extent of bacterial binding to IOLs increased from hydrophilic acrylic polymer to PMMA, hydrophobic acrylic, and silicone. The differences were statistically significant. Bacterial adhesion to and biofilm development on the IOL surface depended on the characteristics of the biomaterial.

Biofilms of As(III)-oxidising bacteria: formation and activity studies for bioremediation process development

The formation and activity of an As(III)-oxidising biofilm in a bioreactor, using pozzolana as bacterial growth support, was studied for the purpose of optimising fixed-bed bioreactors for bioremediation. After 60 days of continuous functioning with an As(III)-contaminated effluent, the active biofilm was found to be located mainly near the inflow rather than homogeneously distributed. Biofilm development by the CAsO1 bacterial consortium and by Thiomonas arsenivorans was then studied both on polystyrene microplates and on pozzolana. Extra-cellular polymeric substances (EPS) and yeast extract were found to enhance bacteria attachment, and yeast extract also appears to increase the kinetics of biofilm formation. Analysis of proteins, sugars, lipids and uronic acids indicate that sugars were the main EPS components. The specific As(III)-oxidase activity of T. arsenivorans was higher (by ninefold) for planktonic cells than for sessile ones and was induced by As(III). All the results suggest that the biofilm structure is a physical barrier decreasing As(III) access to sessile cells and thus to As(III)-oxidase activity induction. The efficiency of fixed-bed reactors for the bioremediation of arsenic-contaminated waters can be thus optimised by controlling different factors such as temperature and EPS addition and/or synthesis to increase biofilm density and activity.

Comparative Analysis of Two UDP-glucose Dehydrogenases in Pseudomonas aeruginosa PAO1

UDP-glucose dehydrogenase (UGDH) catalyzes a two-step NAD(+)-dependent oxidation of UDP-glucose to produce UDP-glucuronic acid, which is a common substrate for the biosynthesis of exopolysaccharide. Searching the Pseudomonas aeruginosa PAO1 genome data base for a UGDH has helped identify two open reading frames, PA2022 and PA3559, which may encode a UGDH. To elucidate their enzymatic identity, the two genes were cloned and overexpressed in Escherichia coli, and the recombinant proteins were purified. Both the gene products are active as dimers and are capable of utilizing UDP-glucose as a substrate to generate UDP-glucuronic acid. The K(m) values of PA2022 and PA3559 for UDP-glucose are approximately 0.1 and 0.4 mM, whereas the K(m) values for NAD(+) are 0.5 and 2.0 mM, respectively. Compared with PA3559, PA2022 exhibits broader substrate specificity, utilizing TDP-glucose and UDP-N-acetylglucosamine with one-third the velocity of that with UDP-glucose. The PA2022 mutant and PA2022-PA3559 double mutant, but not the PA3559 mutant, are more susceptible to chloramphenicol, cefotaxime, and ampicillin. The PA3559 mutant, however, shows a reduced resistance to polymyxin B compared with wild type PAO1. Finally, real time PCR analysis indicates that PA3559 is expressed primarily in low concentrations of Mg(2+), which contrasts with the constitutive expression of PA2022. Although both the enzymes catalyze the same reaction, their enzymatic properties and gene expression profiles indicate that they play distinct physiological roles in P. aeruginosa, as reflected by different phenotypes displayed by the mutants.

Kinetics of Biofilm Formation of a Cyanobacterium on Bioreactor Surfaces

The biofilm formation of the cyanobacterium Synechococcus sp. strain PCC 7942-SPc-BF, an isolate from the culture of Synechococcus sp. strain PCC 7942-SPc, has been investigated in terms of growth kinetics and superficial gas velocity of the bioreactor. Initial attachment of the cells in planktonic growth to the bioreactor surface took place steeply in the situation where the nitrate concentration dropped beyond the critical value. Kinetic analysis showed that the specific growth rate of the population was higher in biofim growth than in planktonic growth. In addition it was observed that biofilm formation was strongly influenced by the detachment rate that has a positive relation with superficial gas velocity. Cells in biofilm growth showed higher hydrophobicity than those in planktonic growth.

Heparin Stimulates Staphylococcus aureus Biofilm Formation

Heparin, known for its anticoagulant activity, is commonly used in catheter locks. Staphylococcus aureus, a versatile human and animal pathogen, is commonly associated with catheter-related bloodstream infections and has evolved a number of mechanisms through which it adheres to biotic and abiotic surfaces. We demonstrate that heparin increased biofilm formation by several S. aureus strains. Surface coverage and the kinetics of biofilm formation were stimulated, but primary attachment to the surface was not affected. Heparin increased S. aureus cell-cell interactions in a protein synthesis-dependent manner. The addition of heparin rescued biofilm formation of hla, ica, and sarA mutants. Our data further suggest that heparin stimulation of biofilm formation occurs neither through an increase in sigB activity nor through an increase in polysaccharide intracellular adhesin levels. These finding suggests that heparin stimulates S. aureus biofilm formation via a novel pathway.

Quantitative analyses of Streptococcus mutans biofilms with quartz crystal microbalance, microjet impingement and confocal microscopy

Microbial biofilm formation can be influenced by many physiological and genetic factors. The conventional microtiter plate assay provides useful but limited information about biofilm formation. With the fast expansion of the biofilm research field, there are urgent needs for more informative techniques to quantify the major parameters of a biofilm, such as adhesive strength and total biomass. It would be even more ideal if these measurements could be conducted in a real-time, non-invasive manner. In this study, we used quartz crystal microbalance (QCM) and microjet impingement (MJI) to measure total biomass and adhesive strength, respectively, of S. mutans biofilms formed under different sucrose concentrations. In conjunction with confocal laser scanning microscopy (CLSM) and the COMSTAT software, we show that sucrose concentration affects the biofilm strength, total biomass, and architecture in both qualitative and quantitative manners. Our data correlate well with previous observations about the effect of sucrose on the adherence of S. mutans to the tooth surface, and demonstrate that QCM is a useful tool for studying the kinetics of biofilm formation in real time and that MJI is a sensitive, easy-to-use device to measure the adhesive strength of a biofilm.

Anaerobic growth does not support biofilm formation in Escherichia coli K-12

Association with a surface in a structure known as biofilm is the prevailing microbial lifestyle. Here we show the kinetics of biofilm formation of Escherichia coli W3110 in static cultures growing under aerobic or anaerobic conditions. Aerobically growing cells in LB medium started to produce detectable amounts of biofilm after 4 to 8 h, displaying maximal accumulation of formed biofilm at 24 h, corresponding to the onset of stationary phase. Then an abrupt reduction in the biomass of the biofilm was observed. This decrease was not prevented by external addition of fresh nutrients and coincided with the depletion of oxygen as measured by the enzymatic activity of the AdhE protein. No biofilm formation was detected in cultures grown anaerobically in LB or LB supplemented with nitrate, nitrite, DMSO or fumarate, even after 72 h of incubation, well inside the stationary phase, suggesting that under anaerobic growth conditions E. coli cannot form biofilms.