Reaction Kinetics Research Articles

Enhancing the Reaction Kinetics and Stability of Co-Free Li-Rich Cathode Materials via a Multifunctional Strategy.

Co-free Li-rich layered oxides (CFLLOs) with anionic redox activity are among the most promising cathode materials for high-energy-density and low-cost lithium-ion batteries (LIBs). However, irreversible oxygen release often causes severe structural deterioration, electrolyte decomposition, and the formation of unstable cathode-electrolyte interface (CEI) film with high impedance. Additionally, the elimination of cobalt elements further deteriorates the reaction kinetics, leading to reduced capacity and poor rate performance. Here, a multifunctional strategy is proposed, incorporating Li2MnO3 phase content regulation, micro-nano structure design, and heteroatom substitution. The increased content of Li2MnO3 phase enhances the capacity through oxygen redox. The smaller nanoscale primary particles induce greater tensile strain and introduce more grain boundaries, thereby improving the reaction kinetics and reactivity, while the larger micron-sized secondary particles help to reduce interfacial side reactions. Furthermore, Na⁺ doping modulates the local coordination environment of oxygen, stabilizing both the anion framework and the crystal structure. As a result, the designed cathode exhibits enhanced rate performance, delivering a capacity of 158 mAh g⁻¹ at 5.0 C and improved cyclic stability, with a high capacity retention of 99% after 400 cycles at 1.0 C. This multifunctional strategy holds great promise for advancing the practical application of CFLLOs in next-generation LIBs.

Hierarchical Equations of Motion for Quantum Chemical Dynamics: Recent Methodology Developments and Applications.

ConspectusQuantum effects are critical to understanding many chemical dynamical processes in condensed phases, where interactions between molecules and their environment are usually strong and non-Markovian. In this Account, we review recent progress from our group in development and application of the hierarchical equations of motion (HEOM) method, highlighting its ability to address some challenging problems in quantum chemical dynamics.In the HEOM method, the bath degrees of freedom are represented using effective modes from exponential decomposition of the bath correlation function. Complex spectral densities and low temperature simulations often require a larger number of modes, making the simulations very expensive. Recent advances, such as the barycentric spectral decomposition (BSD) technique, can significantly reduce the number of effective modes, allowing to handle complex spectral densities and enabling simulations at very low temperatures, including near-zero temperature dynamics.Another key improvement in the computational efficiency is the use of tensor network methods like matrix product states and hierarchical tensor networks. These techniques allow for efficient HEOM propagation with thousands of effective modes, crucial for simulating large molecular systems interacting with multiple baths. This combination enables simulations of excitation energy transfer (EET) in systems like the Fenna-Matthews-Olson (FMO) complex and even larger systems with experimentally determined spectral densities.The versatility of the HEOM method is demonstrated through applications to a wide range of chemical dynamics problems. Simulations of EET and related ultrafast spectroscopy are first briefly covered. Applications of the HEOM to quantum tunneling effects in proton transfer reactions are then presented. Early works have studied the non-Kramers dependence of the rate constant as a function of bath friction due to deep tunneling and revealed vibrationally nonadiabatic dynamics within the so-called nontraditional view of proton transfer reactions. A recent work on the large kinetic isotope effects in soybean lipoxygenase also indicated that many quantum correction approximations to classical transition-state theory may fall short in describing deep tunneling effects.Charge transport and separation dynamics in organic semiconductors are another area where the HEOM method has been instrumental. We first demonstrate that the HEOM provides a unified description of both band-like and thermally assisted charge carrier transport in organic materials. The effect of non-nearest neighbor transitions is then investigated by combining generalized master equations with exact memory kernels. The HEOM method also enables simulation of charge separation in organic photovoltaics (OPVs) and reveals how factors such as external electric fields, entropy, and charge delocalization influence the charge separation barrier and dynamics.Moreover, HEOM has been applied to investigate hydrogen atom scattering on the Au(111) surface and vibrational energy relaxation at molecule-metal interfaces. These studies provide deeper insights into how electron-hole pair excitations and temporary charge transfer states influence the nuclear motion, offering a new framework for simulating nonadiabatic dynamics on metal surfaces.In summary, the HEOM method has developed into a robust tool for simulating quantum effects in condensed phases. Future developments in algorithm efficiency and computational power will likely expand its applicability to even more complex systems.

Dynamic evolution processes in electrocatalysis: structure evolution, characterization and regulation.

Reactions on electrocatalytic interfaces often involve multiple processes, including the diffusion, adsorption, and conversion of reaction species and the interaction between reactants and electrocatalysts. Generally, these processes are constantly changing rather than being in a steady state. Recently, dynamic evolution processes on electrocatalytic interfaces have attracted increasing attention owing to their significant roles in catalytic reaction kinetics. In this review, we aim to provide insights into the dynamic evolution processes in electrocatalysis to emphasize the importance of unsteady-state processes in electrocatalysis. Specifically, the dynamic structure evolution of electrocatalysts, methods for the characterization of the dynamic evolution and the strategies for the regulation of the dynamic evolution for improving electrocatalytic performance are summarized. Finally, the conclusion and outlook on the research on dynamic evolution processes in electrocatalysis are presented. It is hoped that this review will provide a deeper understanding of dynamic evolution in electrocatalysis, and studies of electrocatalytic reaction processes and kinetics on the unsteady-state microscopic spatial and temporal scales will be given more attention.

Design of PtSn Nanocatalysts for Fuel Cell Applications.

The challenges in the fuel cell industry lie in the cost, performance, and durability of the electrode components, especially the platinum-based catalysts. Alloying has been identified as an effective strategy to reduce the cost of the catalyst and increase its efficiency and durability. So far, most studies focused on the design of PtM bimetallic nanocatalyst, where M is a transition metal. The resulting PtM materials show higher catalytic activity, but their stability remained challenging. In addition, most of the transition metals M are expensive or low abundant. Tin (Sn) has gained attention as alloying element due to its versatility in manufacturing both anode and cathode electrodes. If used as anode catalyst, it is able to overcome poisoning from CO and related intermediates. As cathode catalyst, it improves the kinetics of the oxygen reduction reaction (ORR). Additionally, Sn is an abundant and cheap element. The current contribution outlines the state of the art on the alloy and shape effect on PtSn activity and stability, demonstrating its high potential to develop cheaper, more efficient and durable catalysts for fuel-cell electrodes. Additionally, in situ analytical and spectroscopic studies can shed light on the elementary steps involved in the use of PtSn catalytic systems. Finally, this intriguing material can be used as a parent system for the synthesis of high-entropy-alloys and intermetallics materials.

Multiscale Defective Interfaces for Realizing Na-CO2 Batteries With Ultralong Lifespan.

Despite their favorable high energy density and potential for CO2 recycling, Na-CO2 batteries have been held back by limitations in cycling capability, stemming from the sluggish CO2 reduction/evolution reaction (CO2RR/CO2ER) kinetics at CO2 cathode and unmanageable deposition/stripping of metallic Na at the anode upon cycling. Herein, a "two-in-one" electrode with multiscale defective FeCu interfaces (CP@FeCu) is presented, which is capable of improving the CO2RR/CO2ER kinetics of CO2-breathing cathode, while modulating sodium deposition behavior. Experimental and theoretical investigations reveal multiscale defective FeCu interfaces are responsible for the enhancement of sodiophilicity and catalytic properties. The defect and valence oscillation effects originate in multiscale defective FeCu interfaces, effectively facilitating the adsorption of reactants and decomposition of Na2CO3 during CO2RR/CO2ER processes, along with exceptional cycling stability of 2400 cycles (4800h) at 5µAcm-2. Meanwhile, the CP@FeCu with sodium affinity creates a uniform electric field and robust adsorption for Na, making initial nucleation sites more conducive to Na deposition and achieving dendrite-resistant and durable anodes. This work offers a scientific insight into the functionalization design of "two-in-one" electrodes, which is essential for a unified solution to the challenges in sodium anodes and CO2 cathodes.

Engineering interfacial molecular interactions on Ag Hollow fibre gas diffusion electrodes for high efficiency in CO2 conversion to CO.

The electrochemical CO2 reduction reaction (CO2RR) occurs at the nanoscale interface of the electrode-electrolyte. Therefore, tailoring the interfacial properties in the interface microenvironment provides a powerful strategy to optimise the activity and selectivity of electrocatalysts towards the desired products. Here, the microenvironment at the electrode-electrolyte interface of the flow-through Ag-based hollow fibre gas diffusion electrode (Ag HFGDE) is modulated by introducing surfactant cetyltrimethylammonium bromide (CTAB) as the electrolyte additive. The porous hollow fibre configuration and gas penetration mode facilitate the CO2 mass transfer and the formation of the triple-phase interface. Through the ordered arrangement of hydrophobic long-alkyl chains, CTAB molecules at the electrode/electrolyte interface promoted CO2 penetration to active sites and repelled water to reduce the activity of competitive hydrogen evolution reaction (HER). By applying CTAB-containing catholyte, Ag HFGDE achieved a high CO Faradaic efficiency (FE) of over 95 % in a wide potential range and double the partial current density of CO. The enhancement of CO selectivity and suppression of hydrogen was attributed to the improvement of charge transfer and the CO2/H2O ratio enhancement. These findings highlight the importance of adjusting the local microenvironment to enhance the reaction kinetics and product selectivity in the electrochemical CO2 reduction reaction CO2RR.

Insights into the Deterioration Mechanism of Charging Ability during Calendar Aging and Cycling Aging of High-Voltage Co-Poor NCM Cathode-Graphite Full Battery.

Lithium-ion battery (LIB) has gained significant recognition for the power cell market owing to its impressive energy density and appealing cost benefit. Among various cathodes, a high-voltage cobalt-poor lithium nickel manganese cobalt oxide cathode (Co-poor NCM cathode) has been considered as a promising strategy to enhance its energy density. Despite these advantages, high-voltage Co-poor NCM cathode-graphite full battery usually suffers from poor rate performance. However, fast charging has been a key indicator for widespread application of power batteries. Although many efforts have been made to improve the charging performance of fresh batteries, few works investigate the charging ability during calendar aging and cycling aging of high-voltage Co-poor NCM cathode-graphite full battery. In this work, we found that the charging ability becomes worse during calendar aging and cycling aging. Results showed that the increasing charge transfer resistance from the cathode is the major obstacle to achieving fast charging during the aging process. To address the problem, high-voltage Al2O3-coated Co-poor NCM cathode successfully prepared via a simple atomic layer deposition (ALD) method has been developed to reduce the decay of charging performance during calendar aging and cycling aging. Al2O3-coated NCM cathode can effectively reduce the growth rate of the resistance of cathode, which is benefiting from the conversion of Al2O3 into LiAlO2 with high ionic conductivity and the restriction formation of rock salt phase. Benefiting from the decreased charge transfer resistance of the NCM cathode, the mismatch of the lithium-ion reaction kinetics is well alleviated, thus effectively reducing the polarization under fast charging. As a result, Al2O3-coated NCM cathode-graphite full battery shows the slow deterioration of charging performance during the aging process. This work provides a promising strategy for constructing fast-charging batteries during calendar aging and cycling aging.

An Oriented Diffusion Strategy to Configure All-Region Ultrahigh-Density Metal Single Atoms for High-Capacity Sodium Storage.

Single-atom metals (SAMs), despite being promising for high-utilization catalysis, biomedicine, and energy storage, usually suffer from limited catalytic performance caused by low metal loading. Herein, via an oriented diffusion strategy, all-region ultrahigh-loading (18.9wt.%) Sn-SAMs over carbon nanorings matrix (Sn-SAMs@CNR) are initially achieved based on the transformation of a g-C3N4@SnO2@polydopamine ring-like nested structure. The formation process of Sn-SAMs involves a critical conversion from oxygen-coordination (SnO2) to nitrogen-coordination (Sn-N4) and simultaneous anti-Osterwalder ripening promoted under spatial confinement. Notably, the g-C3N4-derived N-containing gaseous intermediates dynamically drive the oriented diffusion (inside-out diffusion) of Sn-SAMs across the carbon nanorings, realizing an all-region ultrahigh loading of SAMs throughout the carbon matrix. This strategy is also applied to other metal materials (Fe, Co, Ni, Cu, and Sb), and features excellent universality. When applied as the anode for sodium-ion batteries, experimental analyses and theoretical calculations demonstrate that high-loading Sn-N4 active sites significantly optimize electron density distribution and improve reaction kinetics. Consequently, Sn-SAMs@CNR exhibits outstanding durability of 364mAhg-1 even after 5000 cycles with an impressively low (0.00068%) capacity decay per cycle. This work opens up a universally new avenue for all-region ultrahigh loading of SAMs to carbon matrix for high-performance energy storage.

Differentiating Reactive Oxygen Species with DNA Framework Monitors.

The lifespan, oxidizing properties, bonding behaviors, and reactivity of reactive oxygen species (ROS) produced during photocatalytic activation can vary significantly due to the differences in electron configurations of ROS, which are dependent on their generation mechanisms: energy transfer or charge transfer. Hence, identifying and differentiating ROS of different mechanisms can improve our understanding of redox reactions and related diseases, providing a basis for the prevention and treatment of related diseases. Here, we have developed a DNA framework monitor (DFM) based on dynamic DNA structural changes to effectively distinguish the two types of ROS produced in photocatalytic activation of O2. This DFM provides a visualization tool for observing the reaction kinetics of ROS with DNA, not only distinguishing two types of ROS with different mechanisms but also serving as a universal system for evaluating the efficacy and performance of nanomaterials for ROS regulation.

Comparison of non-premixed and premixed flamelets for ultra WET aero engine combustion conditions

The Water-Enhanced Turbofan (WET) is a future concept for aero engine applications being developed by MTU Aero Engines AG. Steam is injected into the combustion chamber to reduce temperature peaks and emission of pollutants. Depending on the steam content, the combustion process is modified. To analyze the effect of steam on the reaction kinetics and the temperature, detailed chemistry has to be employed. By comparing laminar flame speed and mole fraction distribution across the flame front, an appropriate chemical mechanism for the considered operating conditions including high steam loads was selected. Tabulated chemistry based on flamelets was employed, which enables the use of complex mechanisms in CFD analysis at reasonable computational costs. A comparison of premixed freely propagating flames and non-premixed counterflow diffusion flames to represent the manifolds was investigated. Various definitions of the progress variable are studied for ultra WET combustion considered under aero engine conditions. The manifolds from both model flames are compared from dry to ultra WET conditions with kerosene in an adapted Sandia Flame D large eddy simulation. While the premixed flamelets are generated efficiently, the results obtained with non-premixed flamelets are more reliable for the range of operating conditions investigated.

Bimetallic NiCo@C with a Hollow Sea Urchin Structure Enables Li-S Batteries to Hasten the Reaction Kinetics and Effectively Inhibit the Shuttling of Polysulfides.

The "shuttle effect" and several issues related to it are seen as "obstacles" to the study and development of lithium-sulfur batteries (LSBs). This work aims at finding how to fully expose bimetallic sites and quicken the battery reaction kinetics. Here, a bimetallic NiCo-MOF and its derivative NiCo@C with a hollow sea urchin structure are produced. The obtained NiCo@C possesses a micromesoporous structure and fully disclosed bimetallic active sites because of its distinctive structure. The experimental findings demonstrate that fully exposed bimetallic active sites take on chemical adsorbents and collaborate with micromesopores as physical constraints to effectively suppress the "shuttle effect". Furthermore, the hollow sea urchin structure of NiCo@C enables a highly conductive grid, which provides channels to facilitate the movement of solvated Li+. Thanks to these advantages, the NiCo@C-based sulfur cathode offers a high initial discharge specific capacity of 924.41 mAh g-1 at 0.1 C and sustains 390.35 mAh g-1 discharge specific capacity after 100 cycles. The quick transfer of solvated lithium ions (DLi+ = 1.81 × 10-8 cm2 s-1) enables the battery to still contribute a discharge specific capacity of 367.54 mAh g-1 at 1 C. This work provides a new understanding for the structural design of positive electrodes in LSBs.

Interfacial Acid‐Like Microenvironment and Orbital Modulating Strategy toward Efficient Hydrogen Evolution in Neutral High‐Salinity Wastewater/Seawater

Electrochemical high‐salinity wastewater splitting is a promising technology for green hydrogen (H2) production. However, the kinetics of hydrogen evolution reaction (HER) in neutral media is slow, and the high theoretical potential of oxygen evolution reaction leads to large energy losses. Herein, an iron‐based electrocoagulation‐coupled hydrogen production integrated system (IEHPS) is constructed, which is realized by coupling low‐potential anodic iron oxidation reaction with cathodic HER. The non‐noble metal HxWO3‐Ni catalyst is synthesized by fabricating a proton sponge HxWO3 to achieve an interfacial acid‐like microenvironment and doping it with Ni heteroatom to modulate the 4d orbital of W, thereby weakening the adsorption strength of the W site toward hydrogen. Consequently, the HxWO3 Ni demonstrates remarkable performance characteristics, boasting a mere 131 mV overpotential at 10 mA cm−2 and Tafel slope of 44 mV dec− in neutral media. Operating at an applied voltage of 1.5 V, the IEHPS exhibits a high hydrogen production rate of 235 mL g−1 min−1 in seawater. It achieves nearly complete removal of contaminants like rhodamine B and heavy metal ions within a rapid 8–20 min, with an energy consumption of only 3.7 kWh Nm−3. This study provides a promising pathway for efficient and energy‐saving production of high‐purity hydrogen and effective treatment of high‐salinity wastewater.

Unveiling the Structure and Dissociation of Interfacial Water on RuO2 for Efficient Acidic Oxygen Evolution Reaction

Understanding the structure and dynamic process of interfacial water molecules at the catalyst‐electrolyte interface on acidic oxygen evolution reaction (OER) kinetics is highly desirable for the development of proton exchange membrane water electrolyzers. Herein, we construct a series of p‐block metallic elements (Ga, In, Sn) doped RuO2 catalysts with manipulated electronic structure and Ru‐O covalency to investigate the effect of electrochemical interfacial engineering on the improvement of acidic OER activity. Associated with operando attenuated total reflectance surface‐enhanced infrared absorption spectroscopy measurements and theoretical analysis, we uncover the free‐H2O enriched local environment and dynamic evolution from 4‐coordinated hydrogen‐bonded water and 2‐coordinated hydrogen‐bonded water to free‐H2O on the surface of Ga‐RuO2, are responsible for the optimized connectivity of hydrogen bonding network in the electrical double layer by promoting solvent reorganization. In addition, the structurally ordered interfacial water molecules facilitate high‐efficiency proton‐coupled electron transfer across the interface, leading to reduced energy barrier of the follow‐up dissociation process and enhanced acidic OER performance. This work highlights the key role of structure and dynamic process of interfacial water for acidic OER, and demonstrates the electrochemical interfacial engineering as an efficient strategy to design high‐performance electrocatalysts.

Atmospheric Chemistry of Chloroprene Initiated by OH Radicals: Combined Ab Initio/DFT Calculations and Kinetics Analysis.

Chloroprene (CP; CH2═C(Cl)-CH═CH2) is a significant toxic airborne pollutant, often originating from anthropogenic activities. However, the environmental fate of CP is incompletely understood. High level CCSD(T)/aug-cc-pVTZ//M06-2X/aug-cc-pVTZ calculations combined with kinetic modeling were employed here to glean new insight into the reaction mechanism, energies, and kinetics of the reaction of CP with OH radical (•OH). We report the energies of four different addition pathways and six different abstraction pathways. The •OH attack on the terminal C1 atom of the =CH2 group (which is directly attached to the =CCl moiety), leading to the formation of HOCH2-•C(Cl)-CH═CH2, was found to be a major path. The barrier height for the formation of the corresponding transition state was found to be -1.9 kcal mol-1 below that of the starting CP + •OH reactants. Rate coefficients were calculated for addition and abstraction pathways involving the CP + •OH reaction under pre-equilibrium approximation conditions, employing a combination of canonical variational transition state theory and small curvature tunneling. The overall rate coefficient for the reaction of CP + •OH at 298 K was found to be 1.4 × 10-10 cm3 molecule-1 s-1. The thermochemistry of the possible channels and atmospheric implications are provided. In addition, the fate of HOCH2-•C(Cl)-CH═CH2 in the presence of 3O2 was investigated. We found the reaction of the CP-derived peroxy radical adduct with HO2 and NO to make contributions to the formation of products such as formaldehyde, HO2 radical, Cl atom, HOCH2C(OOH)(Cl)CH═CH2, HOCH2C(O)Cl, ClC(O)CH═CH2, HOCH2C(O)CH═CH2, and HC(O) radical.

Unveiling the Structure and Dissociation of Interfacial Water on RuO2 for Efficient Acidic Oxygen Evolution Reaction.

Understanding the structure and dynamic process of interfacial water molecules at the catalyst-electrolyte interface on acidic oxygen evolution reaction (OER) kinetics is highly desirable for the development of proton exchange membrane water electrolyzers. Herein, we construct a series of p-block metallic elements (Ga, In, Sn) doped RuO2 catalysts with manipulated electronic structure and Ru-O covalency to investigate the effect of electrochemical interfacial engineering on the improvement of acidic OER activity. Associated with operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements and theoretical analysis, we uncover the free-H2O enriched local environment and dynamic evolution from 4-coordinated hydrogen-bonded water and 2-coordinated hydrogen-bonded water to free-H2O on the surface of Ga-RuO2, are responsible for the optimized connectivity of hydrogen bonding network in the electrical double layer by promoting solvent reorganization. In addition, the structurally ordered interfacial water molecules facilitate high-efficiency proton-coupled electron transfer across the interface, leading to reduced energy barrier of the follow-up dissociation process and enhanced acidic OER performance. This work highlights the key role of structure and dynamic process of interfacial water for acidic OER, and demonstrates the electrochemical interfacial engineering as an efficient strategy to design high-performance electrocatalysts.

A Computation-Guided Design of Highly Defined and Dense Bimetallic Active Sites on a Two-Dimensional Conductive Metal-Organic Framework for Efficient H2O2 Electrosynthesis.

Electrochemical synthesis of hydrogen peroxide (H2O2) via the two-electron oxygen reduction reaction (2e--ORR) provides an alternative method to the energy-intensive anthraquinone method. Metal macrocycles with precise coordination are widely used for 2e--ORR electrocatalysis, but they have to be commonly loaded on conductive substrates, thus exposing a large number of 2e--ORR-inactive sites that result in poor H2O2 production rate and efficiency. Herein, guided by first-principle predictions, a substrate-free and two-dimensional conductive metal-organic framework (Ni-TCPP(Co)), composed of CoN4 sites in porphine(Co) centers and Ni2O8 nodes, is designed as a multi-site catalyst for H2O2 electrosynthesis. The approperiate distance between the CoN4 and Ni2O8 sites in Ni-TCPP(Co) weakens the electron transfer between them, thus ensuring their inherent activities and creating high-density active sites. Meanwhile, the intrinsic electronic conductivity and porosity of Ni-TCPP(Co) further facilitate rapid reaction kinetics. Therefore, outstanding 2e--ORR electrocatalytic performance has been achieved in both alkaline and neutral electrolytes (>90 %/85 % H2O2 selectivity within 0-0.8 V vs. RHE and >18.2/18.0 mol g-1 h-1 H2O2 yield under alkaline/neutral conditions), with confirmed feasibility for water purification and disinfection applications. This strategy thus provides a new avenue for designing catalysts with precise coordination and high-density active sites, promoting high-efficiency electrosynthesis of H2O2 and beyond.

Photocatalytic degradation of acetaminophen, ciprofloxacin and amoxicillin using UV/ZnO in a suspended photocatalytic reactor

Abstract This study aims at evaluation of the photocatalytic degradation of pharmaceutical compounds acetaminophen (ATM), ciprofloxacin (CXN), and amoxicillin (AMX) using zinc oxide (ZnO) nano powder as a photocatalyst in a suspended reactor using a 16 W UV lamp. Operating parameters pH, catalyst dosage, and pollutant concentration were optimised for a working volume of 1.3 litres of model pharmaceutical compounds. The photo degradation efficiency was 95% at pH 6 after 5 h of irradiation for ATM, 98% at pH 6 after 2 h of irradiation for CXN, and 100% at pH 10 after 3 h of irradiation for AMX. The reaction kinetics for the degradation of ATM, CXN, and AMX followed pseudo-first order with the rate constants in the order of kAMX>kCXN>kATM 0.0321 min−1, 0.0232 min−1 and 0.0070 min−1 respectively. TOC (Total Organic Carbon) analysis was carried out for the model compounds, among which compound amoxicillin was found having a higher rate constant of about 0.0108 min−1, which is 1.2 times higher than ciprofloxacin and 2.5 times greater than acetaminophen. This study concludes that ZnO nano powder is efficient in degrading the model pharmaceutical compounds ATM, CXN, and AMX by utilising the UV light, which is evident from the results of the UV–vis spectrophotometer, HPLC analysis, and mineralisation study. In addition, ANOVA was performed on the results obtained from optimisation studies, which confirms the substantial influence of the operating parameters on the degradation of the compounds.

Magnetic Nanoparticles and Radio Frequency Induction: From Specific Heating to Magnetically Induced Catalysis

AbstractThis comprehensive review explores the potential of radio frequency (RF) induction heating in chemical reactions, explicitly focusing on magnetically induced catalysis using magnetic nanoparticles (NPs). We trace the recent historical progress of induction heating and highlight the advancements in liquid and gas‐phase reactions, particularly in its integration with heterogeneous catalysis. The review finds that induction heating profoundly impacts reaction kinetics, and selectivity, and can even reduce overpotentials in electrocatalytic processes. A final outlook unveils the challenges and opportunities associated with aspects such as fundamental research and reactor design, with a particular focus on expanding its use to higher pressures and necessary optimizations to improve energy efficiency. Moreover, it highlights the pressing need for standardized reporting in induction‐heated catalysis. The study underscores the significance of this brand‐new field in developing efficient and sustainable catalytic processes, which are essential for meeting the growing demand for clean energy and sustainable chemical production.

Hydration‐effect Boosted Active Hydrogen Facilitates Neutral Ammonia Electrosynthesis from Nitrate Reduction

AbstractElectrocatalytic nitrate reduction to ammonia (NO3RR) in a neutral medium is a green and effective strategy for treating nitrate pollution meanwhile producing ammonia. However, the insufficient active hydrogen (H*) on the catalyst surface resulting from the sluggish Volmer step (H2O → H+ + OH−), and the competitive hydrogen evolution reaction (HER) caused by H* coupling severely restrict the enhancement of NO3RR activity. Herein, a hydration‐effect boosted H*‐rich strategy facilitating neutral ammonia electrosynthesis from nitrate reduction is proposed. The introduction of the hydration‐effect‐promoting element aluminum into the copper‐based catalyst forming CuAlO2, which adjusts the electron density distribution in the catalyst system, and the resulting hydration‐effect significantly promotes the H* generation in a neutral medium. Moreover, the rapid charge transfer at the CuO/CuAlO2 interface facilitates the reaction kinetics and the H* diffusion. More importantly, the introduction of Al weakens the overly strong adsorption of intermediates by CuO, thereby accelerating the hydrogenation process and suppressing HER. Thus, under neutral conditions, CuO/CuAlO2 reached a Faradaic efficiency and an ammonia yield as high as 97.81 ± 1.94% and 10.21 ± 0.64 mg h−1 cm−2 at −1.0 V versus RHE toward NO3RR.

Synergistic Vertical Graphene‐Exsolved Perovskite to Boost Reaction Kinetics for Flexible Zinc–Air Batteries

AbstractZinc–air batteries (ZABs) hold significant promise for flexible electronics due to their high energy density and low cost. However, their practical application is hindered by the sluggish kinetics of the oxygen evolution and oxygen reduction reactions (OER/ORR). This study highlights a novel design of vertical graphene arrays (VGs) anchored on PrBa0.5Sr0.5Co1.8Ru0.2O5+δ (PBSCRu) perovskite nanofibers, fabricated via plasma‐enhanced chemical vapor deposition. Notably, the VG growth induces the exsolution of Co nanoparticles from the PBSCRu perovskite, resulting in a unique PBSCRu‐Co‐VG heterostructure. Theoretical calculations demonstrate that constructing PBSCRu‐Co‐VG heterojunction regulates interfacial electronic redistribution, thereby lowering energy barriers for both OER and ORR. As a result, the PBSCRu@VG‐5 electrocatalyst exhibits superior stability and higher peak power density in both liquid and flexible solid‐state ZABs compared to the pristine PBSCRu electrocatalyst. This protocol advances the integration of synergetic perovskite/metal/graphene composites, offering considerable potential for next‐generation energy conversion technologies.