Kinetic Isotope Effect Experiments Research Articles

Dehydrogenative Photocyclization of 3-Styryl Indoles to Fused Indole Systems.

The synthesis of 5-aryl- or 5,6-diaryl-11H-benzo[a]carbazoles has been achieved from 3-styryl indoles through catalyst-free photoinitiated dehydrogenative cyclization transformation, providing a range of structurally diverse products in excellent yields under mild conditions. The protocol is also applicable to furan and thiophene samples. This Mallory-type reaction takes place in an argon atmosphere without external oxidants. Finally, detailed mechanistic studies were performed, and kinetic isotope effect experiments indicate that dehydrogenative annulation reaction involves photoinduced 6π-electrocyclic ring-closing and hydrogen evolution cascade processes.

Grignard Reagent Addition to Pyridinium Salts: A Catalytic Approach to Chiral 1,4-Dihydropyridines.

Catalytic dearomatization of pyridinium salts is a powerful technique for constructing chiral N-heterocycles, which are crucial in alkaloid natural products and drugs. Despite its potential, progress in metal-catalyzed asymmetric dearomatization of pyridinium derivatives has been limited. Here, we present the enantioselective 1,4-dearomatization of pyridinium salts using Grignard reagents and chiral copper catalysis. This approach yields enantioenriched functionalized 1,4-dihydropyridines. Experimental kinetic isotope effects and density functional theory calculations provide insights into the reaction mechanism, regio- and enantioselectivity, and the rate-limiting step.

Catalytic Hydrolysis-Oxidation of Halogenated Methanes over Phase- and Defect-Engineered CePO4: Halogenated Byproduct-Free and Stable Elimination.

Catalytic elimination of halogenated volatile organic compound (HVOC) emissions was still a huge challenge through conventional catalytic combustion technology, such as the formation of halogenated byproducts and the destruction of the catalyst structure; hence, more efficient catalysts or a new route was eagerly desired. In this work, crystal phase- and defect-engineered CePO4 was rationally designed and presented abundant acid sites, moderate redox ability, and superior thermal/chemical stability; the halogenated byproduct-free and stable elimination of HVOCs was achieved especially in the presence of H2O. Hexagonal and defective CePO4 with more structural H2O and Brønsted/Lewis acid sites was more reactive and durable compared with monoclinic CePO4. Based on the phase and defect engineering of CePO4, in situ diffuse reflectance infrared Fourier transform spectra (DRIFTS), and kinetic isotope effect experiments, a hydrolysis-oxidation pathway characterized by the direct involvement of H2O was proposed. Initiatively, an external electric field (5 mA) significantly accelerated the elimination of HVOCs and even 90% conversion of dichloromethane could be obtained at 170 °C over hexagonal CePO4. The structure-performance-dependent relationships of the engineered CePO4 contributed to the rational design of efficient catalysts for HVOC elimination, and this pioneering work on external electric field-assisted catalytic hydrolysis-oxidation established an innovative HVOC elimination route.

Hexa-Fe(III) Carboxylate Complexes Facilitate Aerobic Hydrocarbon Oxidative Functionalization: Rh Catalyzed Oxidative Coupling of Benzene and Ethylene to Form Styrene.

Fe(II) carboxylates react with dioxygen and carboxylic acid to form Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 (X = acetate or pivalate), which is an active oxidant for Rh-catalyzed arene alkenylation. Heating (150-200 °C) the catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2 with ethylene, benzene, Fe(II) carboxylate, and dioxygen yields styrene >30-fold faster than the reaction with dioxygen in the absence of the Fe(II) carboxylate additive. It is also demonstrated that Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 is an active oxidant under anaerobic conditions, and the reduced material can be reoxidized to Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 by dioxygen. At optimized conditions, a turnover frequency of ∼0.2 s-1 is achieved. Unlike analogous reactions with Cu(II) carboxylate oxidants, which undergo stoichiometric Cu(II)-mediated production of phenyl esters (e.g., phenyl acetate) as side products at temperatures ≥150 °C, no phenyl ester side product is observed when Fe carboxylate additives are used. Kinetic isotope effect experiments using C6H6 and C6D6 give k H/k D = 3.5(3), while the use of protio or monodeutero pivalic acid reveals a small KIE with k H/k D = 1.19(2). First-order dependencies on Fe(II) carboxylate and dioxygen concentration are observed in addition to complicated kinetic dependencies on the concentration of carboxylic acid and ethylene, both of which inhibit the reaction rate at a high concentration. Mechanistic studies are consistent with irreversible benzene C-H activation, ethylene insertion into the formed Rh-Ph bond, β-hydride elimination, and reaction of Rh-H with Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 to regenerate a Rh-carboxylate complex.

Built‐in Electric Field in Yolk Shell CuO‐Co3O4@Co3O4 with Modulated Interfacial Charge to Facilitate Hydrogen Production from Ammonia Borane Methanolysis Under Visible Light

AbstractDeveloping highly efficient and low‐cost catalysts is an endless challenge in the field of producing H2 from ammonia borane (AB). Herein, the manufacture of yolk‐shell CuO‐Co3O4@Co3O4 nanocomposites are reported by using Cu2O@CuO as a template, in which CuO‐Co3O4 is encapsulated into the Co3O4 hollow nanocubes. Due to the unique morphology and built‐in electric field (BIEF) induced by the CuO‐Co3O4 interface, the CuO‐Co3O4@Co3O4 nanocomposites display remarkable catalytic activity in AB methanolysis. The turnover frequency (TOF) is 24.8 min‐1 in the absence of light and significantly increases to 33.9 min‐1 when exposed to visible light. The experimental and theoretical calculations demonstrate that charge migration from CuO to Co3O4 results in the formation of dual active sites (Cu and Co sites) in charge of adsorption and activation of CH3OH and AB, respectively. Visible light‐induced acceleration is likely caused by type‐II heterojunction, which allows a large number of photogenerated electrons to accumulate in the CuO conduction band. This effectively activates the adsorbed CH3OH on the Cu site, rendering it easier to break the O−H bond. A plausible reaction mechanism involved the activation of the O−H bond of CH3OH, as the RDS is proposed according to the FT‐IR and kinetic isotope effect (KIE) experiments. This work offers an avenue to rationally design high‐performance yolk‐shell catalyst for rapid hydrogen production from AB methanolysis reaction under visible light.

Enantioselective Si−H Insertion of Arylvinyldiazoesters Promoted by Rhodium(I)/Diene Complexes

AbstractAn enantioselective Si−H insertion between α‐arylvinyldiazoesters and silanes has been developed by employing rhodium(I)/chiral diene complex as the catalyst. This protocol offers a catalytic asymmetric approach to various chiral silanes containing α‐arylvinyl functionality at room temperature with good enantiocontrol (89–99% ee). Transformation of the resulting enantiomerically enriched α‐arylvinyl‐α‐silyl esters led to a variety of other valuable building blocks. The deuterium kinetic isotope effect experiments revealed a rhodium(I)‐mediated concerted Si−H insertion mechanism.

One-pot synthesis of multivariate porphyrinic metal-organic frameworks with the insertion of metallobipyridine and the cooperative catalysis for carbonyl hydrosilylation

A series of multivariate porphyrinic metal-organic frameworks with the insertion of bipyridine were obtained via one-pot synthesis. The single Pt site was introduced into the bipyridine linker of BPy@Co-PCN-224 through post-synthetic metalation. The resultant Pt(BPy)Cl2@M-PCN-224, especially when M was Co(II), could efficiently promote carbonyl hydrosilylation with a turnover number up to 13,140 based on Pt and could be recycled and reused for at least 6 times without a noticeable decrease of activity. Mechanistic studies based on in situ UV–vis, FT-IR and 1H NMR spectra, and kinetic isotope effect (KIE) experiments disclosed that the catalytic reaction was accomplished by the cooperative catalysis of Pt(BPy)Cl2 and Co-PCN-224, in which Pt(BPy)Cl2 was the catalytically active center and meanwhile the Co-PCN-224 could condense and increase the concentrations of ketone molecules in its inner cavities through the interactions between Co-porphyrin and carbonyl group. The plausible reaction pathway was proposed based on density functional theory calculations.

Divergent Synthesis of Multi-Substituted Aminotetralins via [4+2] Annulation of Aldimines with Alkenes by Rare-Earth-Catalyzed Benzylic C(sp3 )-H Activation.

The search for efficient and selective methods for the divergent synthesis of multi-substituted aminotetralins is of much interest and importance. We report herein for the first time the diastereoselective [4+2] annulation of 2-methyl aromatic aldimines with alkenes via benzylic C(sp3 )-H activation by half-sandwich rare-earth catalysts, which constitutes an efficient route for the divergent synthesis of both trans and cis diastereoisomers of multi-substituted 1-aminotetralin derivatives from readily accessible aldimines and alkenes. The use of a scandium catalyst bearing a sterically demanding cyclopentadienyl ligand such as C5 Me4 SiMe3 or C5 Me5 exclusively afforded the trans-selective annulation products in the reaction of aldimines with styrenes and aliphatic alkenes. In contrast, the analogous yttrium catalyst, whose metal ion size is larger than that of scandium, yielded the cis-selective annulation products. This protocol features 100 % atom-efficiency, excellent diastereoselectivity, broad substrate scope, and good functional group compatibility. The reaction mechanisms have been elucidated by kinetic isotope effect (KIE) experiments and the isolation and transformations of some key reaction intermediates.

Divergent Synthesis of Multi‐Substituted Aminotetralins via [4+2] Annulation of Aldimines with Alkenes by Rare‐Earth‐Catalyzed Benzylic C(sp3)−H Activation

AbstractThe search for efficient and selective methods for the divergent synthesis of multi‐substituted aminotetralins is of much interest and importance. We report herein for the first time the diastereoselective [4+2] annulation of 2‐methyl aromatic aldimines with alkenes via benzylic C(sp3)−H activation by half‐sandwich rare‐earth catalysts, which constitutes an efficient route for the divergent synthesis of both trans and cis diastereoisomers of multi‐substituted 1‐aminotetralin derivatives from readily accessible aldimines and alkenes. The use of a scandium catalyst bearing a sterically demanding cyclopentadienyl ligand such as C5Me4SiMe3 or C5Me5 exclusively afforded the trans‐selective annulation products in the reaction of aldimines with styrenes and aliphatic alkenes. In contrast, the analogous yttrium catalyst, whose metal ion size is larger than that of scandium, yielded the cis‐selective annulation products. This protocol features 100 % atom‐efficiency, excellent diastereoselectivity, broad substrate scope, and good functional group compatibility. The reaction mechanisms have been elucidated by kinetic isotope effect (KIE) experiments and the isolation and transformations of some key reaction intermediates.

Understanding the Interplay of the Brønsted Acidity of Catalyst Ancillary Groups and the Solution Components in Iron-porphyrin-Mediated Carbon Dioxide Reduction.

The rapid and efficient conversion of carbon dioxide (CO2) to carbon monoxide (CO) is an ongoing challenge. Catalysts based on iron-porphyrin cores have emerged as excellent electrochemical mediators of the two proton + two electron reduction of CO2 to CO, and many of the design features that promote function are known. Of those design features, the incorporation of Brønsted acids in the second coordination sphere of the iron ion has a significant impact on catalyst turnover kinetics. The Brønsted acids are often in the form of hydroxyphenyl groups. Herein, we explore how the acidity of an ancillary 2-hydroxyphenyl group affects the performance of CO2 reduction electrocatalysts. A series of meso-5,10,15,20-tetraaryl porphyrins were prepared where only the functional group at the 5-meso position has an ionizable proton. A series of cyclic voltammetry (CV) experiments reveal that the complex with -OMe positioned para to the ionizable -OH shows the largest CO2 reduction rate constants in acetonitrile solvent. This is the least acidic -OH of the compounds surveyed. The turnover frequency of the -OMe derivative can be further improved with the addition of 4-trifluoromethylphenol to the solution. In contrast, the iron-porphyrin complex with -CF3 positioned opposite the ionizable -OH shows the smallest CO2 reduction rate constants, and its turnover frequency is less enhanced with the addition of phenols to the reaction solutions. The origin of this effect is rationalized based on kinetic isotope effect experiments and density functional calculations. We conclude that catalysts with weaker internal acids coupled with stronger external acid additives provide superior CO2 reduction kinetics.

Radical-Smiles Rearrangement by a Vitamin B2-Derived Photocatalyst in Water.

Herein, we report a catalytic radical-Smiles rearrangement system of arene migration from ether to carboxylic acid with riboflavin tetraacetate (RFT), a readily available ester of natural vitamin B2, as the photocatalyst and water as a green solvent, being free of external oxidant, base, metal, inert gas protection, and lengthy reaction time. Not only the known substituted 2-phenyloxybenzoic acids substrates but also a group of naphthalene- and heterocycle-based analogues was converted to the corresponding aryl salicylates for the first time. Mechanistic studies, especially a couple of kinetic isotope effect (KIE) experiments, suggested a sequential electron transfer-proton transfer processes enabled by the bifunctional flavin photocatalyst.

Quantum effects in CH activation with [Cu2O2]2+ complexes.

We investigate the mechanism of primary alkane CH bond activation with dioxo-dicopper ([Cu2O2]2+) complexes, which serve as model catalysts for enzymes capable of activating CH bonds under mild conditions. As large H/D kinetic isotope effects (KIEs) are observed in enzymes and their synthetic mimics, we employ density functional theory along with variational transition-state theory with multidimensional tunneling to estimate reaction rate coefficients. By systematically varying ligand electrophilicity and substrate chain length, we examine trends in rate coefficients and kinetic isotope effects for the two proposed CH activation pathways - one-step oxo-insertion and two-step radical recombination. Although larger tunneling transmission coefficients are obtained for the radical pathway, the oxo-insertion mechanism yields higher rate coefficients on account of lower activation barriers. The question of the preferred CH activation mechanism, however, remains open: excellent agreement is observed between the predicted and known experimental KIE results for the radical pathway, while calculated Hammett slopes for the oxo-insertion pathway closely mirror experiments.

Ligand Combination Approach in Pd‐Catalyzed Direct C−H Arylation of Benzothiazole and Benzoxazole

AbstractThe use of ligand combination approach in the Pd catalyzed direct C−H arylation of benzothiazole and benzoxazole is demonstrated. The combination of two ligands phenanthroline monohydrate (Phen.H2O) and triphenylphosphine (PPh3) with Pd‐catalyst have offered the best catalytic properties in the C−H bond arylation reactions than either of two ligands employed separately in the reactions. This protocol exhibits a wide substrate scope affording C2 arylated benzothiazole and benzoxazole derivatives in excellent yields. Mechanistic studies including kinetic isotope effect (KIE), H/D exchange and competition experiments show that the C−H bond activation of benzothiazole and benzoxazole is very facile under reaction conditions. Furthermore, different mechanistic pathways originated from the catalytically active species such as Pd(η2‐dba)L (dba=dibenzylidene acetone) and Pd(PPh3)2 were investigated using computational methods. The computational results suggest that the generation of catalytically active species from Pd2(dba)3 is endoergic process and Phen ligand can initiate this step. On the other hand, the presence of PPh3 could be crucial for the oxidative addition of aryl halides which is the rate‐determining step of the reaction.

Dehydrogenation of Aqueous Formic Acid by Iridium and Ruthenium Complexes with Nitrogen‐rich Diamino‐bis(1H‐1,2,4‐triazole)

AbstractThe development of efficient catalysts for the dehydrogenation of formic acid (FA) through molecular level control and precise regulation remains challenging. Herein, we report the newly developed complexes of iridium and ruthenium with nitrogen‐rich ligand for aqueous FA dehydrogenation. The Cp*Ir complex 1 (Cp*=cyclopentadienyl) and Ru(p‐cym) complex 2 (p‐cym=p‐Cymene) were synthesized and fully characterized. The single crystal structures of these complexes have a typical piano‐stool structure. A turnover frequency of 12468 h−1 was achieved for FA dehydrogenation at 90 °C by using complex 1 bearing 3,3’‐diamino‐5,5’‐bis(1H‐1,2,4‐triazole) (DABT). The effects of pH, temperature, concentration of formic acid and amount of catalyst on the reaction kinetics were studied in detail. Kinetic isotope effect (KIE) experiments and 1H NMR detection of reaction revealed that a plausible mechanism involves the decarboxylation of formate and the formation of H2. More importantly, the influence of H2O and H+ was involved in the rate‐determining step. This study demonstrated the effectiveness of nitrogen‐rich ligand for FA dehydrogenation, which would contribute to the development of new and effective hydrogen release systems.

Visible-light-induced electron density enrichment of the active sites in the core-satellite structured CuWO4@NiO for fast hydrogen generation from ammonia borane methanolysis

Catalytic dehydrogenation of ammonia borane (AB) is an integrated technology for producing hydrogen with promising applications in mobile fuel cells. However, its commercial prospect is significantly hampered by the high expenditure of precious metal catalysts. Herein, a low-cost and efficient Z-schemed core-satellite structured CuWO4@NiO nanocomposite catalyst was developed for the methanolysis of AB for fast hydrogen production. The experimental and theoretical calculation results revealed charge transfer between CuWO4 (core) and NiO (satellite), thus creating active Ni and Cu sites for the adsorption and activation of methanol and AB, respectively. When the CuWO4@NiO catalyst was irradiated with visible light, numerous photogenerated electrons were accumulated in the conduction band of NiO of CuWO4@NiO by virtue of the special Z-scheme heterojunction, resulting in the electron density enrichment of Ni sites. The electron-enriched Ni sites effectively activated the adsorbed methanol, thus making the O–H bond cleavage easier, which was identified as the rate-determining step in AB methanolysis using kinetic isotope effect experiments. Based on the special electronic and energy band structures, our CuWO4@NiO catalyst exhibited outstanding catalytic activity with a turnover frequency of 26.5 min−1 in AB methanolysis, surpassing most noble-metal-free catalysts reported in the literature. Our findings show that visible light can be applied as a useful tool to optimize the electronic states of both active sites of catalysts and adsorbed reactants. This study provides insight into the design of more efficient catalytic systems toward AB methanolysis for fast hydrogen evolution.

Substituent Effects and Mechanistic Insights on the Catalytic Activities of (Tetraarylcyclopentadienone)iron Carbonyl Compounds in Transfer Hydrogenations and Dehydrogenations.

(Cyclopentadienone)iron carbonyl compounds are catalytically active in carbonyl/imine reductions, alcohol oxidations, and borrowing hydrogen reactions, but the effect of cyclopentadienone electronics on their activity is not well established. A series of (tetraarylcyclopentadienone)iron tricarbonyl compounds with varied electron densities on the cyclopentadienone were prepared, and their activities in transfer hydrogenations and dehydrogenations were explored. Additionally, mechanistic studies, including kinetic isotope effect experiments and modifications to substrate electronics, were undertaken to gain insights into catalyst resting states and turnover-limiting steps of these reactions. As the cyclopentadienone electron density increased, both the transfer hydrogenation and dehydrogenation rates increased. A catalytically relevant, trimethylamine-ligated iron compound was isolated and characterized and was observed in solution under both transfer hydrogenation and dehydrogenation conditions. Importantly, it was catalytically active in both reactions. Kinetic isotope effect data and initial rates in transfer hydrogenation reactions with 4'-substituted acetophenones provided evidence that hydrogen transfer from the catalyst to the carbonyl substrate occurred during the turnover-limiting step, and NMR spectroscopy supports the trimethylamine adduct as an off-cycle resting state and the (hydroxycyclopentadienyl)iron hydride as an on-cycle resting state. In transfer dehydrogenations of alcohols, the use of electronically modified benzylic alcohols provided evidence that the turnover-limiting step involves the transfer of hydrogen from the alcohol substrate to the catalyst. The trimethylamine-ligated compound was proposed as the primary catalyst resting state in dehydrogenations.

Catalytic Mechanism of Nonglycosidic C-N Bond Formation by the Pseudoglycosyltransferase Enzyme VldE.

The pseudoglycosyltransferase (PsGT) enzyme VldE is a homologue of the retaining glycosyltransferase (GT) trehalose 6-phosphate synthase (OtsA) that catalyzes a coupling reaction between two pseudo-sugar units, GDP-valienol and validamine 7-phosphate, to give a product with α,α-N-pseudo-glycosidic linkage. Despite its biological importance and unique catalytic function, the molecular bases for its substrate specificity and reaction mechanism are still obscure. Here, we report a comparative mechanistic study of VldE and OtsA using various engineered chimeric proteins and point mutants of the enzymes, X-ray crystallography, docking studies, and kinetic isotope effects. We found that the distinct substrate specificities between VldE and OtsA are most likely due to topological differences within the hot spot amino acid regions of their N-terminal domains. We also found that the Asp158 and His182 residues, which are in the active site, play a significant role in the PsGT function of VldE. They do not seem to be directly involved in the catalysis but may be important for substrate recognition or contribute to the overall architecture of the active site pocket. Moreover, results of the kinetic isotope effect experiments suggest that VldE catalyzes a C-N bond formation between GDP-valienol and validamine 7-phosphate via an SNi-like mechanism. The study provides new insights into the substrate specificity and catalytic mechanism of a member of the growing family of PsGT enzymes, which may be used as a basis for developing new PsGTs from GTs.

Atomically Dispersed Cobalt/Copper Dual-Metal Catalysts for Synergistically Boosting Hydrogen Generation from Formic Acid.

The development of practical materials for (de)hydrogenation reactions is a prerequisite for the launch of a sustainable hydrogen economy. Herein, we present the design and construction of an atomically dispersed dual-metal site Co/Cu-N-C catalyst allowing significantly improved dehydrogenation of formic acid, which is available from carbon dioxide and green hydrogen. The active catalyst centers consist of specific CoCuN6 moieties with double-N-bridged adjacent metal-N4 clusters decorated on a nitrogen-doped carbon support. At optimal conditions the dehydrogenation performance of the nanostructured material (mass activity 77.7 L ⋅ gmetal -1 ⋅ h-1 ) is up to 40 times higher compared to commercial 5 % Pd/C. In situ spectroscopic and kinetic isotope effect experiments indicate that Co/Cu-N-C promoted formic acid dehydrogenation follows the so-called formate pathway with the C-H dissociation of HCOO* as the rate-determining step. Theoretical calculations reveal that Cu in the CoCuN6 moiety synergistically contributes to the adsorption of intermediate HCOO* and raises the d-band center of Co to favor HCOO* activation and thereby lower the reaction energy barrier.

Elucidating the alloying effect of PdAg/CNT catalysts on formic acid dehydrogenation with kinetic isotope effect

Formic acid has emerged as a promising liquid hydrogen carrier for addressing the transport and storage issues of hydrogen, owing to its high hydrogen density (4.4 wt.%) and easy-handling liquid phase. Therefore, the conversion of formic acid into hydrogen and vice versa is a significant technique. Despite the development of various metal alloy catalysts for efficient production of hydrogen from formic acid, it remains unclear how the metal alloy affects formic acid dehydrogenation from the mechanistic perspective. This study addresses this gap by investigating the alloy effect of Pd and Ag on formic acid dehydrogenation, using PdAg alloy nanoparticles supported on carbon nanotube catalysts. The PdAg alloy, analyzed using multiple characterization methods, demonstrated enhanced catalytic activity, which was maximized at a Pd:Ag molar ratio of 7:3. More importantly, temperature-dependent and kinetic isotope effect experiments demonstrated that the electronic modification of Pd by Ag improved its activity by promoting the cleavage of the CH bond of formic acid. The results suggest that the kinetic isotope effect would be a potent technique for elucidating the alloying effect, as well as providing a deeper understanding of the mechanism.

Rattle-structured CuO/Co3O4@C microspheres, a potent bifunctional catalyst for hydrogen production from ammonia borane hydrolysis and methanolysis

Engineering and fabricating cost-effective and high-performing bifunctional catalysts for ammonia borane (AB) hydrolysis and methanolysis is paramount for their commercial availability. A series of rattle-structured CuO/Co3O4@C microsphere bifunctional catalysts for AB hydrolysis and methanolysis were produced using a simple hard template etching approach. The CuO/Co3O4@C-4 (4 refers to designed the mole ratio of Cu/Co) exhibits the best activity with TOF of 18.8 and 26.8 molH2·molcat-1·min−1 for AB hydrolysis and methanolysis, respectively. It is discovered that the excellent performance is mainly attributed to its unique rattle structure and the synergetic effect between Co3O4 and CuO. Kinetic isotope effect (KIE) experiments and infrared spectroscopy were applied to investigate AB hydrolysis and methanolysis reaction mechanisms. A suggested mechanism for AB methanolysis on rattle-structured CuO/Co3O4@C-4 is proposed based on the experiment results. This work could provide useful guidance for the construction of high-performance bifunctional catalysts for AB hydrolysis and methanolysis for hydrogen production.