Kinetic Energy Dependent Cross Sections Research Articles

Bond Energies of UO+ and UC+: Guided Ion Beam and Quantum Chemical Studies of the Reactions of Uranium Cation with O2 and CO

AbstractGuided ion beam tandem mass spectrometry was used to examine the kinetic energy dependent reactions of U+ with O2 and CO. In the reaction of U+ with O2, the UO+ product is formed in a barrierless and exothermic process with a reaction efficiency at low energies of k/kcol=1.1±0.2, but increases at higher collision energies. Formation of both UO+ and UC+ in the reaction of U+ with CO is endothermic. 0 K bond dissociation energies (BDEs) of D0(U+‐O)=7.88±0.09 eV and D0(U+‐C)=4.03±0.13 eV were determined by analyzing the kinetic energy dependent cross sections in the latter endothermic reactions. These values are within experimental uncertainty of previously reported experimental values. Additionally, the electronic states of UO+ and UC+ and the potential energy surfaces for the reactions were explored by quantum chemical calculations. The former include a full Feller‐Peterson‐Dixon composite approach with correlation contributions up to CCSDT(Q) for UO and UO+, yielding D0(U‐O)=7.82 eV and D0(U+‐O)=7.99 eV, as well as more approximate CCSD(T) calculations where a semi‐empirical model was used to estimate spin‐orbit energy contributions, which are generally found to improve the agreement with experiment. Both experimental BDEs are observed to be close to those of their transition metal congeners, ScL+, YL+, and GdL+ (L=O and C).

Thermochemistry of uranium sulfide cations: guided ion beam and theoretical studies of reactions of U+ and US+ with CS2 and collision-induced dissociation of US+

Reactions of atomic uranium cations with carbon disulfide form US+ in an efficient exothermic reaction and UCS+ in an inefficient endothermic process. The subsequent reaction of US+ with CS2 forms US2 + in an endothermic process having a low energy threshold. At much higher energies, UCS2 + and UCS+ are also formed. Collision-induced dissociation of US+ with Xe yields U+ + S exclusively in an endothermic reaction. Analysis of the kinetic energy dependent cross sections of the endothermic processes yields the 0 K bond dissociation energies of 5.73 ± 0.15 eV for U+ – S, 3.89 ± 0.08 eV for SU+ – S, 1.69 ± 0.17 eV for U+ – CS, 2.78 ± 0.33 eV for U+ – CS2, 1.53 ± 0.30 eV for SU+ – CS, and 5.65 ± 0.39 eV for S – UCS+. Theory is used to explore the structures and electron configurations of US+, US2 +, UCS+, and UCS2 +. The thermochemistry measured in this study is further compared to analogous values previously determined for select group 3 metals, lanthanides, and actinides.

A quantum study of argon induced line mixing in ammonia doublets

We present a theoretical study of pressure broadening and coupling coefficients for selected doublets of the ν 4 band of ammomia in argon bath. Generalized spectroscopic kinetic energy dependent cross sections are determined quantum mechanically making use of available NH3-Ar potential energy surfaces. Thermally averaged values at various temperatures are also provided. Results are in overall good agreement with data available in the literature. A further study focusses on the speed dependence of the corresponding line shape parameters. The pressure broadening coefficients are found to have a well marked speed dependence while the intradoublet coupling terms show a small speed dependence at room temperature.

Guided Ion Beam Studies of the Dy + O → DyO+ + e– Chemi-ionization Reaction Thermochemistry and Dysprosium Oxide, Carbide, Sulfide, Dioxide, and Sulfoxide Cation Bond Energies

Guided ion beam tandem mass spectrometry (GIBMS) was used to measure the kinetic energy dependent product ion cross sections for reactions of the lanthanide metal dysprosium cation (Dy+) with O2, SO2, and CO and reactions of DyO+ with CO, O2, and Xe. DyO+ is formed through an exothermic process when Dy+ reacts with O2, whereas all other processes observed are found to be endothermic. The kinetic energy dependences of these cross sections were analyzed to yield 0 K bond dissociation energies (BDEs) for DyO+, DyC+, DyS+, DyO2+, and DySO+. The 0 K BDE for DyO+ is determined to be 5.60 ± 0.02 eV from the weighted average of six independent thresholds, which are dominated by the slightly endothermic reaction of Dy+ with SO2. Combined with the well-established Dy ionization energy (IE), this value indicates that the chemi-ionization reaction, Dy + O → DyO+ + e-, is endothermic by 0.33 ± 0.02 eV. Theoretical BDEs for Dy+-O, Dy+-C, Dy+-S, ODy+-O, and Dy+-SO were calculated at several levels of theory and basis sets for comparison with experiment with reasonable agreement achieved.

Thermochemistry and mechanisms of the Pt+ + SO2 reaction from guided ion beam tandem mass spectrometry and theory.

The kinetic energy dependences of the reactions of Pt+ (2D5/2) with SO2 were studied using a guided ion beam tandem mass spectrometer and theory. The observed cationic products are PtO+ and PtSO+, with small amounts of PtS+, all formed in endothermic reactions. Modeling the kinetic energy dependent product cross sections allows determination of the product bond dissociation energies (BDEs): D0(Pt+-O) = 3.14 ± 0.11eV, D0(Pt+-S) = 3.68 ± 0.31eV, and D0(Pt+-SO) = 3.03 ± 0.12eV. The oxide BDE agrees well with more precise literature values, whereas the latter two results are the first such measurements. Quantum mechanical calculations were performed for PtO+, PtS+, PtO2 +, and PtSO+ at the B3LYP and coupled-cluster with single, double, and perturbative triple [CCSD(T)] levels of theory using the def2-XZVPPD (X = T, Q) and aug-cc-pVXZ (X = T, Q, 5) basis sets and complete basis set extrapolations. These theoretical BDEs agree well with the experimental values. After including empirical spin-orbit corrections, the product ground states are determined as PtO+ (4Σ3/2), PtS+ (4Σ3/2), PtO2 + (2Σg +), and PtSO+ (2A'). Potential energy profiles including intermediates and transition states for each reaction were also calculated at the B3LYP/def2-TZVPPD level. Periodic trends in the thermochemistry of the group 9 metal chalcogenide cations are compared, and the formation of PtO+ from the Pt+ + SO2 reaction is compared with those from the Pt+ + O2, CO2, CO, and NO reactions.

Thermodynamics and Reaction Mechanisms for Decomposition of a Simple Protonated Tripeptide, H+GGA: From H+GGG to H+GAG to H+GGA.

We present a thorough characterization of fragmentations observed in threshold collision-induced dissociation (TCID) experiments of protonated glycylglycylalanine (H+GGA) with Xe using a guided ion beam tandem mass spectrometer. Kinetic energy dependent cross sections for nine ionic products were obtained and analyzed to provide 0 K barriers for the five primary products, [b2]+, [y1 + 2H]+, [b3]+, [y2 + 2H]+, and [a1]+; and four secondary products, [a2]+, [a3]+, high-energy [y1 + 2H]+, and CH3CHNH2+, after accounting for multiple ion-molecule collisions, the internal energy of reactant ions, unimolecular decay rates, competition between channels, and sequential dissociations. Relaxed potential energy surface scans performed at the B3LYP-GD3BJ/6-311+G(d,p) level of theory are used to identify transition states (TSs) and intermediates of the five primary and three secondary products (with the mechanism of the other secondary product previously established). Geometry optimizations and single point energy calculations of reactants, products, intermediates, and TSs were performed at several levels of theory. These theoretical energies are compared with experimental threshold energies and found to give reasonable agreement, with B3LYP-GD3BJ and M06-2X levels of theory performing slightly better than MP2 and better than B3LYP. The results obtained here are compared with previous results for decomposition of H+GGG and H+GAG to probe the effect of changing the amino acid sequence. Methylation in H+GGA has a significant effect on the competition between the primary sequence products, [b2]+ and [y1 + 2H]+, suppressing the [b2]+ cross section by raising its threshold energy, while enhancing that of [y1 + 2H]+ by lowering its threshold energy.

Guided Ion Beam Studies of the Thorium Monocarbonyl Cation Bond Dissociation Energy and Theoretical Unveiling of Different Isomers of [Th,O,C]+ and Their Rearrangement Mechanism.

Threshold collision-induced dissociation (TCID) of the thorium monocarbonyl cation, ThCO+, with xenon is performed using a guided ion beam tandem mass spectrometer. The only product observed is Th+ resulting from loss of the CO ligand. Analysis of the kinetic energy-dependent cross sections for this CID reaction yields the first experimental determination of the bond dissociation energy (BDE) of Th+-CO at 0 K as 0.94 ± 0.06 eV. Calculated BDEs at the CCSD(T) level of theory with cc-pVXZ (X = T and Q) basis sets and a complete basis set (CBS) extrapolation are in good agreement with the experimental result. The Feller-Peterson-Dixon composite coupled-cluster methodology was also applied on both ThCO+ and ThCO, with contributions up to CCSDT(Q) and a four-component treatment of spin-orbit coupling effects. The final 0 K Th+-CO BDE of 0.94 ± 0.04 eV is in excellent agreement with the current experimental result. The ionization energy of ThCO, as well as the atomization energies and heats of formation for both ThCO and ThCO+, is reported at this same level of theory. Complete potential energy profiles of both quartet and doublet spin are also constructed to elucidate the mechanism for the formation and interconversion of different isomers of [Th,O,C]+. Chemical bonding patterns in low-lying states of ThCO+ and potential energy curves for ThCO+ dissociation are also investigated.

Thermochemical studies of hydrated manganese dications, Mn2+(H2O)x (x = 4–9), using guided ion beam tandem mass spectrometry

The experimental hydration energies of Mn2+(H2O)x complexes, where x = 4–9, are determined by threshold collision-induced dissociation (TCID) with Xe using a guided ion beam tandem mass spectrometer, coupled with an electrospray ionization (ESI) source. The ESI source naturally produces intense beams of the x = 7–9 complexes, but smaller complexes, x = 4–6, can be formed using an in-source fragmentation technique. For all systems, the dominant fragmentation processes observed are sequential loss of water ligands, but at x = 4 and 5, charge separation (CS) reactions are observed where formation of singularly charged species becomes competitive. Kinetic energy-dependent cross sections are obtained and analyzed to yield 0 K bond dissociation energies (BDEs) for the losses of one and two water ligands, which are then converted to 298 K binding enthalpies and Gibbs energies. Barrier heights for three different CS reactions are also determined. These thermodynamic results are compared with values obtained theoretically, with reasonable agreement being achieved. Theoretical geometry and single-point energy calculations are performed at B3LYP, B3P86, M06, and MP2(full) levels of theory.

Relative Energetics of the Gas Phase Protomers of p-Aminobenzoic Acid and the Effect of Protonation Site on Fragmentation.

Guided ion beam tandem mass spectrometry (GIBMS) is used to investigate the energy-dependent threshold collision-induced dissociation (TCID) of the two protonated isomers (protomers) of p-aminobenzoic acid (p-ABA). The O-protomer of p-ABA (protonated at the carbonyl oxygen) was generated via electrospray ionization (ESI) from a methanol/water solution, whereas the N-protomer (protonated at the amine) was produced via ESI from an acetonitrile/water solution. The two protomers are clearly distinguishable from differences in the onsets of the fragmentation channels and in the abundance and identity of the products observed. Additional GIBMS experiments were performed on protonated benzoic acid (BA) and aniline, which serve as simple models for fragmentation driven by protonation at the carbonyl or amine group of p-ABA and provide insights into the dissociation channels of the two p-ABA protomers. Theoretical calculations were carried out to determine the dissociation mechanisms and for comparison with the experimental thermochemistry, which is obtained from modeling the kinetic energy dependent TCID cross sections after accounting for multiple collisions, kinetic shifts, competition between channels, and sequential dissociations. Calculations together with the energy-resolved experiments show that a product ion (C5H5+, m/z 65) common to both p-ABA protomers is produced from sequential dissociations via two different mechanisms. Furthermore, we demonstrate here that the relative stabilities of the two p-ABA protomers can be determined directly from experiment via shared product channels for which there are no barriers exceeding their asymptotic energies. Our results indicate that the two p-ABA protomers are nearly isoenergetic in the gas phase with a relative energy of 0.01 ± 0.26 eV favoring the O-protomer over the N-protomer. This result is in good agreement with calculations at the MP2 and CCSD(T) levels of theory.

Thermochemistry of the Ir+ + SO2 reaction using guided ion beam tandem mass spectrometry and theory.

Kinetic energy dependences of the reactions of Ir+ (5F5) with SO2 were studied using a guided ion beam tandem mass spectrometer and theory. The observed cationic products are IrO+, IrS+, and IrSO+, formed in endothermic reactions. Bond dissociation energies (BDEs) of the products are determined by modeling the kinetic energy dependent product cross sections: D0(Ir+-O) = 4.27 ± 0.11 eV, D0(Ir+-S) = 4.03 ± 0.06 eV, and D0(Ir+-SO) ≥ 2.95 ± 0.06 eV. The oxide BDE agrees well with literature values, whereas the two latter results are novel measurements. Quantum mechanical calculations are performed at the B3LYP level of theory using the def2-TZVPPD basis set for all product BDEs with additional calculations for IrS+, IrO2 +, and IrSO+ at the coupled cluster with single, double, and perturbative triple excitation levels with def2-QZVPPD and aug-cc-pVXZ (X = T and Q and for IrS+, also X = 5) basis sets and complete basis set extrapolations. These theoretical BDEs agree reasonably well with the experimental values. 1A1 (IrO2 +), 5Δ4 (IrS+), and 3A″/1A' (IrSO+) are found to be the ground states after including empirical spin-orbit corrections. The potential energy surfaces including intermediates and transition states for each reaction are also calculated at the B3LYP/def2-TZVPPD level. The formation of MO+ (M = Re, Os, and Ir) from M+ + SO2 reactions is compared with those from the M+ + O2 and M+ + CO reactions, where interesting trends in cross sections are observed. Overall, these studies suggest that the M+ + O2 reactions had restrictions associated with reactions along A' and A″ surfaces.

Evaluation of the Pr + O → PrO+ + e- chemi-ionization reaction enthalpy and praseodymium oxide, carbide, dioxide, and carbonyl cation bond energies.

Guided ion beam tandem mass spectrometry (GIBMS) was used to measure the kinetic energy dependent product ion cross sections for reactions of the lanthanide metal praseodymium cation (Pr+) with O2, CO2, and CO and reactions of PrO+ with CO, O2, and Xe. PrO+ is formed through barrierless exothermic processes when the atomic metal cation reacts with O2 and CO2, whereas all other reactions are observed to be endothermic. Analyses of the kinetic energy dependences of these cross sections yield 0 K bond dissociation energies (BDEs) for PrO+, PrC+, PrCO+, and PrO2+. The 0 K BDE for PrO+ is determined to be 7.62 ± 0.09 eV from the weighted average of five independent thresholds. This value is combined with the well-established ionization energy (IE) of Pr to indicate an exothermicity of the chemi-ionization reaction, Pr + O → PrO+ + e-, of 2.15 ± 0.09 eV. Additionally, BDEs of Pr+-C, OPr+-O, and Pr+-CO are determined to be 2.97 ± 0.10. 2.47 ± 0.11, and 0.31 ± 0.07 eV. Theoretical Pr+-O, Pr+-C, OPr+-O, and Pr+-CO BDEs are calculated for comparison with experimental values. The Pr+-O BDE is underestimated at the B3LYP and PBE0 level of theory but better agreement is obtained using the coupled-cluster with single, double, and perturbative triple excitations, CCSD(T), level. Density functional theory approaches yield better agreement for the BDEs of Pr+-C, OPr+-O, and Pr+-CO.

Guided Ion Beam Tandem Mass Spectrometry and Theoretical Study of SO2 Activated by Os.

The kinetic-energy dependence of SO2 activated by Os+ was studied by guided ion beam tandem mass spectrometry. Species observed in endothermic reactions were OsO+, OsO2+ or OsS+, and OOsS+. The kinetic energy-dependent cross sections were modeled to yield 0 K bond dissociation energies (BDEs) of 5.01 ± 0.06 eV (Os+-O), 5.15 ± 0.07 eV (Os+-O2), 4.50 ± 0.17 eV (Os+-S), and 4.22 ± 0.11 eV (Os+-SO). Among these BDE values, the values for OsO+ and OsO2+ agree with literature values and those for OsS+ and OOsS+ are novel measurements. Theoretical calculations were performed at a B3LYP/def2-TZVPPD level for all products, and additional calculations were performed for OsS+, OsO2+, and OsSO+ using the CCSD(T) level of theory, extrapolated to the complete basis set (CBS) limit, and def2-QZVPPD and aug-cc-pVxZ (x = T, Q, and 5) basis sets. These calculations indicate that the ground states of the products are 4Π5/2 (OsO+), 2B1 (OsO2+), 4Π5/2 (OsS+), and 2A″ (OOsS+) after including empirical spin-orbit corrections. The potential energy surfaces (PESs) for OsSO2+ intermediates, transition states, and all products were also investigated at the B3LYP/def2-TZVPPD level. The PESs show that none of the reactions have barriers in excess of the product endothermicities. Cross sections for OsO+ formation are compared to those from previous guided ion beam studies of related systems (Os+ + O2 and CO and Re+ + SO2) to evaluate their relative behaviors.

Guided Ion Beam and Quantum Chemical Investigation of the Thermochemistry of Thorium Dioxide Cations: Thermodynamic Evidence for Participation of f Orbitals in Bonding.

Kinetic energy dependent reactions of ThO+ with O2 are studied using a guided ion beam tandem mass spectrometer. The formation of ThO2+ in the reaction of ThO+ with O2 is observed to be slightly endothermic and also exhibits two obvious features in the cross section. These kinetic energy dependent cross sections were modeled to determine a 0 K bond dissociation energy of D0(OTh+-O) = 4.94 ± 0.06 eV. This value is slightly larger but within experimental uncertainty of less precise previously reported experimental values. The higher energy feature in the ThO2+ cross section was also analyzed and suggests formation of an excited state of the product ion lying 3.1 ± 0.2 eV above the ground state. Additionally, the thermochemistry of ThO2+ was explored by quantum chemical calculations, including a full Feller-Peterson-Dixon (FPD) composite approach with correlation contributions up to CCSDT(Q) and four-component spin-orbit corrections, as well as more approximate CCSD(T) calculations including semiempirical estimates of spin-orbit energy contributions. The FPD approach predicts D0(OTh+-O) = 4.87 ± 0.04 eV, in good agreement with the experimental value. Analogous FPD results for ThO+, ThO, and ThO2 are also presented, including ionization energies for both ThO and ThO2. The ThO2+ bond energy is larger than those of its transition metal congeners, TiO2+ and ZrO2+, which can be attributed partially to an actinide contraction, but also to contributions from the participation of f orbitals on thorium that are unavailable to the transition metal systems.

Thermochemical studies of reactions of Re+ with SO2 using guided ion beam experiments and theory.

The kinetic energy dependent reactions of Re+ with SO2 were studied with guided ion beam tandem mass spectrometry. ReO+, ReO2+, and OReS+ species were observed as products, all in endothermic reactions. Modeling of the kinetic energy dependent cross sections yields 0 K bond dissociation energies (BDEs, in eV) of 4.78 ± 0.06 (Re+-O), 5.75 ± 0.02 (Re+-O2), and 4.35 ± 0.14 (Re+-SO). The latter two values can be combined with other information to derive the additional values 6.05 ± 0.05 (ORe+-O) and 4.89 ± 0.19 (ORe+-S). BDEs of ReO+ and ReO2+ agree with literature values whereas the values for OReS+ are the first measurements. The former result is obtained even though formation of ground state ReO+ is spin-forbidden. Quantum mechanical calculations at the B3LYP level of theory with a def2-TZVPPD basis set yield results that agree reasonably well with experimental values. Additional calculations at the BP86 and CCSD(T) levels of theory using def2-QZVPPD and aug-cc-pVxZ (x = T, Q, and 5) basis sets were performed to compare thermochemistry with experiment to determine that ReO2+ rather than the isobaric ReS+ is formed. Product ground states are 3Δ3(ReO+), 3B1(OReO+), 5Π-1(ReS+), and 3A''(OReS+) after including empirical spin-orbit corrections, which means that formation of ground state products is spin-forbidden for all three product channels. The potential energy surfaces for the ReSO2+ system were also explored at the B3LYP/def2-TZVPPD level and exhibited no barriers in excess of the endothermicities for all products. BDEs for rhenium oxide and sulfide diatomics and triatomics are compared and discussed. The present result for formation of ReO+ is compared to that for formation of ReO+ in the reactions of Re+ + O2 and CO, where the former system exhibited interesting dual cross section features. Results are consistent with the hypothesis that the distinction of in-plane and out-of-plane CS symmetry in the triatomic systems might be the explanation for the two endothermic features observed in the Re+ + O2 reaction.

Ion spectroscopy and guided ion beam studies of protonated asparaginyl-threonine decomposition: Influence of a hydroxyl containing C-Terminal residue on deamidation processes

The spontaneous deamidation of asparagine residues plays a significant role in various biological functions and degenerative, aging diseases. Here, we present a full description of the deamidation reaction (as well as other key dissociation processes) of protonated asparaginyl-threonine, [AsnThr + H]+, via complementary infrared multiple photon dissociation (IRMPD) ion spectroscopy, threshold collision-induced dissociation (TCID), and theoretical studies. IRMPD spectra allow for the clear identification of precursor and product ion structural conformations when compared to theoretically calculated spectra for likely structures. Analysis of kinetic energy dependent cross sections measured via TCID with xenon using a guided ion beam tandem mass spectrometer allows for characterization of the energies involved in the decomposition processes of interest. Threshold energies are compared to relative single point energies of major reaction species calculated at B3LYP, B3LYP-GD3BJ, B3P86, and MP2(full) levels of theory, thereby determining important rate-limiting steps involved in [AsnThr + H]+ decomposition. Our studies confirm the formation of a succinimide intermediate via deamidation of [AsnThr + H]+, an observation consistent with condensed-phase deamidation analyses. Interestingly, our spectroscopic results suggest deamidation does not produce furanone isomers even though theoretical results indicate this pathway (exhibited in gas-phase analyses of similar dipeptide systems) should be competitive. Dehydration of [AsnThr + H]+ is also observed, where theory suggests that oxazolone and oxazoline formation are competitive at threshold energies, but IRMPD analyses conclusively confirm the formation of the oxazoline structure. The comprehensive results presented (in addition to complementary studies discussed herein) allow for a valuable analysis of C-terminal residue side-chain effects on the deamidation process.

Evaluation of the exothermicity of the chemi-ionization reaction Nd + O → NdO+ + e- and neodymium oxide, carbide, dioxide, and carbonyl cation bond energies.

The exothermicity of the chemi-ionization reaction, Nd + O → NdO+ + e-, has been indirectly determined by measuring the thermochemistry for reactions of the lanthanide metal neodymium cation (Nd+) with O2, CO2, and CO and reactions of NdO+ with CO, O2, and Xe. Guided ion beam tandem mass spectrometry was used to measure the kinetic energy dependent product ion cross sections for these reactions. NdO+ is formed through a barrierless exothermic process when the atomic metal cation reacts with O2 and CO2. All other reactions are observed to be endothermic. Analyses of the kinetic energy dependences of these cross sections yield 0 K bond dissociation energies (BDEs) for several species. The 0 K BDE for Nd+-O is determined to be 7.28 ± 0.10 eV from the average of four independent thresholds. This value is combined with the well-established Nd ionization energy to indicate an exothermicity of the title reaction of 1.76 ± 0.10 eV, which is lower and more precise than literature values. In addition, the Nd+-C, ONd+-O, and Nd+-CO BDEs are determined to be 2.61 ± 0.30, 2.12 ± 0.30, and 0.30 ± 0.21 eV. Additionally, theoretical BDEs of Nd+-O, Nd+-C, ONd+-O, and Nd+-CO are calculated at several levels for comparison with the experimental values. B3LYP calculations seriously underestimate the Nd+-O BDE, whereas MP2 and coupled-cluster with single, double-and perturbative triple excitations values are in reasonable agreement. Good agreement is generally obtained for Nd+-C, ONd+-O, and Nd+-CO BDEs as well.

Thermodynamics and Reaction Mechanisms for Decomposition of a Simple Protonated Tripeptide, H+GAG: a Guided Ion Beam and Computational Study.

We present a thorough characterization of fragmentations observed in threshold collision-induced dissociation (TCID) experiments of protonated glycylalanylglycine (H+GAG) with Xe using a guided ion beam tandem mass spectrometer. Kinetic energy dependent cross sections for nine ionic products were observed and analyzed to provide 0K barriers for the six primary products: [b2]+, [y1 + 2H]+, [b3]+, CO loss, [y2 + 2H]+, and [a1]+; and three secondary products: [a2]+, [a3]+, and CH3CHNH2+, after accounting for multiple ion-molecule collisions, internal energy of reactant ions, unimolecular decay rates, competition between channels, and sequential dissociations. Relaxed potential energy surface scans performed at the B3LYP-GD3BJ/6-311+G(d,p) level of theory are used to identify transition states (TSs) and intermediates of the six primary and one secondary products (where the other two secondary products have mechanisms previously established). Geometry optimizations and single-point energy calculations were performed at several levels of theory. These theoretical energies are compared with experimental threshold energies and are found to give reasonably good agreement, with B3LYP-GD3BJ and M06-2X levels of theory performing better than other levels. The results obtained here are also compared with previous results for decomposition of H+GGG. The primary difference observed is a lowering of the threshold for the [b2]+ product ion and a concomitant suppression of the directly competing [y1 + 2H]+ product, the result of specific methylation of the [b2]+ product ion.

Experimental and Computational Study of the Group 1 Metal Cation Chelates with Lysine: Bond Dissociation Energies, Structures, and Structural Trends.

The kinetic energy dependence of the collision-induced dissociation (CID) of Group 1 metal cations (M+ = Li+, Na+, K+, Rb+, and Cs+) chelated to the amino acid lysine (Lys) was measured by threshold CID using a guided ion beam tandem mass spectrometer. The simple loss of neutral lysine is the only dissociation channel observed with the heavier alkali metal cations, whereas CID of Li+(Lys) yields other competing channels including loss of NH3 (the dominant channel at low energy) and eight other reactions. Analysis of the kinetic energy-dependent cross sections yields experimental M+(Lys) bond dissociation energies (BDEs) of 376 ± 30, 219 ± 13, 160 ± 10, 141 ± 6, and 128 ± 4 kJ/mol for Li+, Na+, K+, Rb+, and Cs+, respectively. Computational searches yielded 18 distinct, low-energy structural families related to sites of M+ binding in M+(Lys) complexes and 10 distinct, low-energy structural families for neutral lysine. Among the four levels of theory and three basis sets used, four different ground conformers of M+(Lys) and four different ground conformers of lysine were found, including a ground conformer of K+(Lys) and Cs+(Lys), [Nε,CO(OH)], and its higher energy zwitterionic analogue, [Nε,CO2-], that better explains recent infrared multiple photon dissociation action spectroscopy results. Computational results for predicted ground structures of M+(Lys) complexes yielded computed BDEs in reasonable agreement with experiment.

Activation of CO2 by Gadolinium Cation (Gd+): Energetics and Mechanism from Experiment and Theory

The exothermic and barrierless activation of CO2 by the lanthanide gadolinium cation (Gd+) to form GdO+ and CO is investigated in detail using guided ion beam tandem mass spectrometry (GIBMS) and theory. Kinetic energy dependent product ion cross sections from collision-induced dissociation (CID) experiments of GdCO2 + are measured to determine the energetics of OGd+(CO) and Gd+(OCO) intermediates. Modeling these cross sections yields bond dissociation energies (BDEs) for OGd+–CO and Gd+–OCO of 0.57 ± 0.05 and 0.38 ± 0.05 eV, respectively. The OGd+–CO BDE is similar to that previously measured for Gd+–CO, which can be attributed to the comparable electrostatic interaction with CO in both complexes. The Gd+(OCO) adduct is identified from calculations to correspond to an electronically excited state. The thermochemistry here and the recently measured GdO+ BDE allows for the potential energy surface (PES) of the Gd+ reaction with CO2 to be deduced from experiment in some detail. Theoretical calculations are performed for comparison with the experimental thermochemistry and for insight into the electronic states of the GdCO2 + intermediates, transition states, and the reaction mechanism. Although the reaction between ground state Gd+ (10D) and CO2 (1Σg +) reactants to form ground state GdO+ (8Σ−) and CO (1Σ+) products is formally spin-forbidden, calculations indicate that there are octet and dectet surfaces having a small energy gap in the entrance channel, such that they can readily mix. Thereby, the reaction can efficiently proceed along the lowest energy octet surface to yield ground state products, consistent with the experimental observations of an efficient, barrierless process. At high collision energies, the measured GdO+ cross section from the Gd+ reaction with CO2 exhibits a distinct feature, attributed to formation of electronically excited GdO+ products along a single dectet PES in a diabatic and spin-allowed process. Modeling this high-energy feature gives an excitation energy of 3.25 ± 0.16 eV relative to the GdO+ (8Σ−) ground state, in good agreement with calculated excitation energies for GdO+ (10Π, 10Σ−) electronic states. The reactivity of Gd+ with CO2 is compared with the group 3 transition metal cations and other lanthanide cations and periodic trends are discussed.

Threshold collision-induced dissociation and theoretical study of protonated azobenzene.

Protonated azobenzene (AB), H+(C6H5N2C6H5), has been studied using threshold collision-induced dissociation in a guided ion beam tandem mass spectrometer. Product channels observed are C6H5N2+ + C6H6 and C6H5+ + N2 + C6H6. The experimental kinetic energy-dependent cross sections were analyzed using a statistical model that accounts for internal and kinetic energy distributions of the reactants, multiple collisions, and kinetic shifts. From this analysis, the activation energy barrier height of 2.02 ± 0.11 eV for benzene loss is measured. To identify the transition states (TSs) and intermediates (IMs) for these dissociations, relaxed potential energy surface (PES) scans were performed at the B3LYP/aug-cc-pVTZ level of theory. The PES indicates that there is a substantial activation energy along the dissociation reaction coordinate that is the rate-limiting step for benzene loss and at some levels of theory, for subsequent N2 loss as well. Relative energies of the reactant, TSs, IMs, and products were calculated at B3LYP, wB97XD, M06, PBEPBE, and MP2(full) levels of theory using both 6-311++G(2d,2p) and aug-cc-pVTZ basis sets. Comparison of the experimental results with theoretical values from various computational methods indicates how well these theoretical methods can predict thermochemical properties. In addition to these density functional theory and MP2 methods, several high accuracy multi-level calculations such as CBS-QB3, G3, G3MP2, G3B3MP2, G4, and G4MP2 were performed to determine the thermochemical properties of AB including the proton affinity and gas-phase basicity, and to compare the performance of different theoretical methods.