Kinematic Properties Research Articles

CO enhancement by magnetohydrodynamic waves

Context. The formation of molecular gas in interstellar clouds is a slow process, but can be enhanced by gas compression. Magneto-hydrodynamic (MHD) waves can create compressed quasi-periodic linear structures, referred to as striations. Striations are observed at the column densities at which the transition from atomic to molecular gas takes place. Aims. We explore the role of MHD waves in the CO chemistry in regions with striations within molecular clouds. Methods. We targeted a region with striations in the Polaris Flare cloud. We conducted a CO J = 2−1 survey in order to probe the molecular gas properties. We used archival starlight polarization data and dust emission maps in order to probe the magnetic field properties and compare against the CO morphological and kinematic properties. We assessed the interaction of compressible MHD wave modes with CO chemistry by comparing their characteristic timescales. Results. The estimated magnetic field is 38–76 µG. In the CO integrated intensity map, we observe a dominant quasiperiodic intensity structure that tends to be parallel to the magnetic field orientation and has a wavelength of approximately one parsec. The periodicity axis is ~17° off from the mean magnetic field orientation and is also observed in the dust intensity map. The contrast in the CO integrated intensity map is ~2.4 times higher than the contrast of the column density map, indicating that CO formation is enhanced locally. We suggest that a dominant slow magnetosonic mode with an estimated period of 2.1–3.4 Myr and a propagation speed of 0.30–0.45 km s−1 is likely to have enhanced the formation of CO, hence created the observed periodic pattern. We also suggest that within uncertainties, a fast magnetosonic mode with a period of 0.48 Myr and a velocity of 2.0 km s−1 could have played some role in increasing the CO abundance. Conclusions. Quasiperiodic CO structures observed in striation regions may be the imprint of MHD wave modes. The Alfvénic speed sets the dynamical timescales of the compressible MHD modes and determines which wave modes are involved in the CO chemistry.

A runaway T Tauri star leaving an extended trail

Aims.We address the problem of young stellar objects that are found too far away from possible star formation sites. Different mechanisms have been proposed before to explain this unexpected circumstance. The idea of high-velocity protostars is one of these mechanisms, although observational support is not always easy to obtain. We aim to shed light on this issue after the serendipitous discovery of a related stellar system.Methods.Following the inspection of archival infrared data, a peculiar anonymous star was found that apparently heads a long tail that resembles a wake-like feature. We conducted a multiwavelength analysis including photometry, astrometry, and spectroscopy. Together with theoretical physical considerations, this approach provided a reasonable knowledge of the stellar age and kinematic properties, together with compelling indications that the extended feature is indeed the signature of a high-velocity, or runaway, newborn star.Results.Our main result is the discovery of a low-mass young stellar object that fits the concept of a runaway T Tauri star that was hypothesized several decades ago. In this peculiar star, nicknamed UJT-1, the interaction of the stellar wind with the surrounding medium becomes extreme. Under reasonable assumptions, this unusual degree of interaction has the potential to encode the mass-loss history of the star on timescales of several ∼105years.

StarHorse results for spectroscopic surveys and Gaia DR3: Chrono-chemical populations in the solar vicinity, the genuine thick disk, and young alpha-rich stars

The Gaia mission has provided an invaluable wealth of astrometric data for more than a billion stars in our Galaxy. The synergy between Gaia astrometry, photometry, and spectroscopic surveys gives us comprehensive information about the Milky Way. Using the Bayesian isochrone-fitting code StarHorse, we derive distances and extinctions for more than 10 million unique stars listed in both Gaia Data Release 3 and public spectroscopic surveys: 557 559 in GALAH+ DR3, 4 531 028 in LAMOST DR7 LRS, 347 535 in LAMOST DR7 MRS, 562 424 in APOGEE DR17, 471 490 in RAVE DR6, 249 991 in SDSS DR12 (optical spectra from BOSS and SEGUE), 67 562 in the Gaia-ESO DR5 survey, and 4 211 087 in the Gaia RVS part of the Gaia DR3 release. StarHorse can increase the precision of distance and extinction measurements where Gaia parallaxes alone would be uncertain. We used StarHorse for the first time to derive stellar ages for main-sequence turnoff and subgiant branch stars, around 2.5 million stars, with age uncertainties typically around 30%; the uncertainties drop to 15% for subgiant-branch-only stars, depending on the resolution of the survey. With the derived ages in hand, we investigated the chemical-age relations. In particular, the α and neutron-capture element ratios versus age in the solar neighbourhood show trends similar to previous works, validating our ages. We used the chemical abundances from local subgiant samples of GALAH DR3, APOGEE DR17, and LAMOST MRS DR7 to map groups with similar chemical compositions and StarHorse ages, using the dimensionality reduction technique t-SNE and the clustering algorithm HDBSCAN. We identify three distinct groups in all three samples, confirmed by their kinematic properties: the genuine chemical thick disk, the thin disk, and a considerable number of young alpha-rich stars (427) that are also a part of the delivered catalogues. We confirm that the genuine thick disk’s kinematics and age properties are radically different from those of the thin disk and compatible with high-redshift (z ≈ 2) star-forming disks with high dispersion velocities. We also find a few extra chemical populations in GALAH DR3 thanks to the availability of neutron-capture element information.

Изучение структуры и кинематики Галактики по рассеянным звездным скоплениям и ассоциациям в эпоху Gaia

This article is a review, written on the basis of previously published results. It examines the main kinematic and spatial properties of the open star clusters (OCs) of the Galaxy. The results of determining the parameters of galactic rotation are described, which are obtained using the most up-to-date kinematic data on stars. Obtained, in particular, according to the Gaia DR2 and Gaia EDR3 catalogs. The results of the analysis of the residual, freed from the influence of the peculiar motion of the Sun and the rotation of the Galaxy, the velocities of the OCs are reflected. It is described about the manifestation of the galactic spiral density wave in the residual velocities of the OCs. The results of various authors are described, who have found out i) how the variance of the residual velocities of the OCs depends on their age, ii) what are the dispersions of the velocities of OB associations and their structural components, iii) what are the dispersions of the residual velocities of stars inside the OCs themselves.

Very Metal-poor Stars in the Solar Vicinity: Kinematics and Abundance Analysis

Very metal-poor stars contain crucial information on the Milky Way’s infancy. In our previous study we derived a mean age of ∼13.7 Gyr for a sample of these stars in the Sun’s vicinity. In this work, we investigate the chemical and kinematic properties of these stars with the goal of obtaining some insights into their origin and their parent population. We did not find any Al–Mg anticorrelation, which leads us to the conclusion that these stars did not form in globular clusters, while the detailed analysis of their orbital parameters reveals that these stars are most probably associated with the pristine bulge of the Milky Way. We then sketch a scenario for the formation of the Milky Way in which the first structure to form was the bulge through rapid collapse. The other components have grown later on, with a significant contribution of accreted structures.

ALMA hints at the presence of turbulent disk galaxies at z > 5

Context. High-redshift galaxies are expected to be more turbulent than local galaxies because of their smaller size and higher star formation and thus stronger feedback from star formation, frequent mergers events, and gravitational instabilities. However, this scenario has recently been questioned by the observational evidence of a few galaxies at z ∼ 4 − 5 with a gas velocity dispersion similar to what is observed in the local population. Aims. Our goal is to determine whether galaxies in the first billion years of the Universe have already formed a dynamically cold rotating disk similar to the local counterparts. Methods. We studied the gas kinematic of 22 main-sequence star-forming galaxies at z > 5 and determined their dynamical state by estimating the ratio of the rotational velocity and of the gas velocity dispersion. We mined the ALMA public archive and exploited the [C II] and [O III] observations to perform a kinematic analysis of the cold and warm gas of z > 5 main-sequence galaxies. We compared our results with what was found in the local and distant Universe and investigated the evolution of the gas velocity dispersion with redshift. We also compared the observations with theoretical expectations to assess the main driver of the gas turbulence at z > 5. Results. The gas kinematics of the high-z galaxy population observed with ALMA is consistent within the errors with rotating but turbulent disks. We indeed infer a velocity dispersion that is systematically higher by 4–5 times than the local galaxy population and the z ∼ 5 dust-obscured galaxies reported in the literature. The difference between our results and those reported at similar redshift can be ascribed to the systematic difference in the galaxy properties in the two samples: the disks of massive dusty galaxies are dynamically colder than the disks of dust-poor galaxies. The comparison with the theoretical predictions suggests that the main driver of the velocity dispersion in high-redshift galaxies is the gravitational energy that is released by the transport of mass within the disk. Finally, we stress that future deeper ALMA high-angular resolution observations are crucial to constrain the kinematic properties of high-z galaxies and to distinguish rotating disks from kiloparsec-scale mergers.

The distribution of globular clusters in kinematic spaces does not trace the accretion history of the host galaxy

Context. Reconstructing how all the stellar components of the Galaxy formed and assembled over time by studying the properties of the stars that form it is the aim of Galactic archaeology. Thanks to the launch of the ESA Gaia astrometric mission and the development of many spectroscopic surveys in recent years, we are for the first time in the position to delve into the layers of the past of the Galaxy. Globular clusters play a fundamental role in this research field since they are among the oldest stellar systems in the MW and thus bear witness to its entire past. Aims. As a natural result of galaxy formation, globular clusters did not necessarily all form in the Galaxy itself. Indeed, a fraction of them could have been formed in satellite galaxies accreted by the Milky Way over time. In recent years, there have been several attempts to constrain the nature of clusters (accreted or formed in the Milky Way itself) through the analysis of kinematic spaces, such as the E − Lz, Lperp − Lz, eccentricity − Lz, and the action space, as well as attempts to reconstruct the properties of the accretion events experienced by the Milky Way through time from this kind of analysis. This work aims to test a widely used assumption about the clustering of the accreted populations of globular clusters in the integrals of motions space. Methods. In this paper we analyse a set of dissipationless N-body simulations that reproduce the accretion of one or two satellites with their globular cluster population on a Milky Way-type galaxy. Results. Our results demonstrate that a significant overlap between accreted and ‘kinematically heated’ in situ globular clusters is expected in kinematic spaces for mergers with mass ratios of 1:10. In contrast with the standard assumptions made in the literature so far, we find that accreted globular clusters do not show dynamical coherence, that is, they do not cluster in kinematic spaces. In addition, we show that globular clusters can also be found in regions dominated by stars that have a different origin (i.e. a different progenitor). This casts doubt on the association between clusters and field stars that is generally made in the literature and is used to assign them to a common origin. By means of Gaussian mixture models, we demonstrate that the overlap of clusters is not only a projection effect on specific planes but is also found when the whole set of kinematic properties (i.e. E, Lz, Lperp, eccentricity, radial, and vertical actions) is taken into account. Overall, our findings severely question the recovered accretion history of the Milky Way based on the phase-space clustering of the globular cluster population.

CERTAIN COSMOLOGICAL MODELS WITH VARIATION OF HUBBLE PARAMETER

The present paper deals with the FRW-Cosmological Model of universe for W2 flat perfect fluid space time. Einstein field equations with variable cosmological constant (Λ) has been obtained for such spacetime and in order to get the complete cosmological solution the law of variation for Hubble’s parameter is considered. A new class of solution have been discussed for the Einstein field equations with variable cosmological constant in which the pressure, energy density, and cosmological constant Λ are found to be decreasing function of cosmic time. The physical and kinematical properties of models are also discussed.

Wet compaction to a blue nugget: a critical phase in galaxy evolution

ABSTRACT We utilize high-resolution cosmological simulations to reveal that high-redshift galaxies tend to undergo a robust ‘wet compaction’ event when near a ‘golden’ stellar mass of $\sim \!\!10^{10}\, \rm M_\odot$ . This is a gaseous shrinkage to a compact star-forming phase, a ‘blue nugget’ (BN), followed by central quenching of star formation to a compact passive stellar bulge, a ‘red nugget’ (RN), and a buildup of an extended gaseous disc and ring. Such nuggets are observed at cosmic noon and seed today’s early-type galaxies. The compaction is triggered by a drastic loss of angular momentum due to, e.g. wet mergers, counter-rotating cold streams, or violent disc instability. The BN phase marks drastic transitions in the galaxy structural, compositional, and kinematic properties. The transitions are from star forming to quenched inside-out, from diffuse to compact with an extended disc or ring and a stellar envelope, from dark matter to baryon central dominance, from prolate to oblate stellar shape, from pressure to rotation support, from low to high metallicity, and from supernova to AGN feedback. The central black hole growth, first suppressed by supernova feedback when below the golden mass, is boosted by the compaction, and the black hole keeps growing once the halo is massive enough to lock in the supernova ejecta.

A LAMOST Spectroscopic Study of T Tauri Stars in the Orion OB1a Subassociation

We present a spectroscopic analysis of T Tauri stars (TTSs) observed with the wide-field multifiber spectrograph LAMOST in the substellar associations Ori OB1a located in the Orion Star-forming Complex. Based on GAIA-DR3 data, we selected stars with proper motions and parallaxes expected for TTSs belonging to the young association. We perform a spectroscopic analysis to obtain the spectral types and measure the equivalent widths of Li i and Hα to confirm the youth of the stars and estimate the accretion status. We also estimate extinctions, masses, and ages for the studied sample. Out of 342 TTSs with spectroscopic and kinematic properties indicating their membership of the subassociation, 2 are reported here for the first time. Finally, we detect four stellar kinematic groups located at different distances, two in the north fields and two in the south field. These groups also show different proper motions. This suggests that the star-forming scenario in this region is more complex than the traditional spatial-temporal scenario, in which a generation of stars triggers the formation of a new spatially differentiated generation of stars.

ПРИМЕНЕНИЕ БИОАНАЛОГОВОГО МЕТОДА ПРОЕКТИРОВАНИЯ ПРИ ФОРМИРОВАНИИ МОБИЛЬНЫХ ЖИЛИЩ

The bio-analogue design method is aimed at improving the architectural forms of a mobile home by selecting and applying optimal natural structures drawn up in the process of evolutionary development. Accordingly, the purpose of the study is to determine the principles of creating mobile homes based on the bio-analogue design method. The research task is to study the features of the structure of living organisms and the functioning of natural systems to determine the ways of shaping and constructive solutions of mobile buildings. It is noted that the methods of architectural bionics should be aimed at studying the structural features of organic natural systems throughout their life cycle. In the course of the study, transforming natural models capable of changing the size and type of shape are studied (succulent plants, insects order the Lepidoptera, the family puffers); mobile natural objects with the ability to overcome distances by moving in space (plants from the fungi department, animals from the arthropod order, reptiles from the grass snake family). In result, the following principles of creating mobile homes are determined: compactness of the structural form of the building, its ability to repeatedly transform the volume and unhindered movement independently or with the help of kinematic properties of other systems. To consider the issues of shaping in nature and architecture, reference forms are taken - a cone, a spiral, a hexagonal prism, a sphere and spatial natural structures, such as shells, ribbed, lattice, mesh, folded and cable–stayed structures. Based on the research, conceptual models of mobile temporary dwellings for tourists, geologists, researchers of the North and nomadic pastoralists have been developed.

Searching for ejected supernova companions in the era of precise proper motion and radial velocity measurements

ABSTRACT The majority of massive stars are born in binaries, and most unbind upon the first supernova. With precise proper motion surveys such as Gaia, it is possible to trace back the motion of stars in the vicinity of young remnants to search for ejected companions. Establishing the fraction of remnants with an ejected companion, and the photometric and kinematic properties of these stars, offers unique insight into supernova progenitor systems. In this paper, we employ binary population synthesis to produce kinematic and photometric predictions for ejected secondary stars. We demonstrate that the unbound neutron star velocity distribution from supernovae in binaries closely traces the input kicks. Therefore, the observed distribution of neutron star velocities should be representative of their natal kicks. We evaluate the probability for any given filter, magnitude limit, minimum measurable proper motion (as a function of magnitude), temporal baseline, distance, and extinction that an unbound companion can be associated with a remnant. We compare our predictions with results from previous companion searches, and demonstrate that the current sample of stars ejected by the supernova of their companion can be increased by a factor of ∼5–10 with Gaia data release 3. Further progress in this area is achievable by leveraging the absolute astrometric precision of Gaia, and by obtaining multiple epochs of deep, high resolution near-infrared imaging with the Hubble Space Telescope, JWST and next-generation wide-field near-infrared observatories such as Euclid or the Nancy Grace Roman Space Telescope.

Parametric study of the kinematic evolution of coronal mass ejection shock waves and their relation to flaring activity

Context.Coronal and interplanetary shock waves produced by coronal mass ejections (CMEs) are major drivers of space-weather phenomena, inducing major changes in the heliospheric radiation environment and directly perturbing the near-Earth environment, including its magnetosphere. A better understanding of how these shock waves evolve from the corona to the interplanetary medium can therefore contribute to improving nowcasting and forecasting of space weather. Early warnings from these shock waves can come from radio measurements as well as coronagraphic observations that can be exploited to characterise the dynamical evolution of these structures.Aims.Our aim is to analyse the geometrical and kinematic properties of 32 CME shock waves derived from multi-point white-light and ultraviolet imagery taken by the Solar Dynamics Observatory (SDO), Solar and Heliospheric Observatory (SoHO), and Solar-Terrestrial Relations Observatory (STEREO) to improve our understanding of how shock waves evolve in 3D during the eruption of a CME. We use our catalogue to search for relations between the shock wave’s kinematic properties and the flaring activity associated with the underlying genesis of the CME piston.Methods.Past studies have shown that shock waves observed from multiple vantage points can be aptly reproduced geometrically by simple ellipsoids. The catalogue of reconstructed shock waves provides the time-dependent evolution of these ellipsoidal parameters. From these parameters, we deduced the lateral and radial expansion speeds of the shocks evolving over time. We compared these kinematic properties with those obtained from a single viewpoint by SoHO in order to evaluate projection effects. Finally, we examined the relationships between the shock wave and the associated flare when the latter was observed on the disc by considering the measurements of soft and hard X-rays.Results.We find that at around 25 solar radii (R⊙), the shape of a shock wave is very spherical, with a ratio between the lateral and radial dimensions (minor radii) remaining at aroundb/a ≈ 1.03 and a radial to lateral speed ratio (VR/VL)≈1.44. The CME starts to slow down a few tens of minutes after the first acceleration and then propagates at a nearly constant speed. We revisit past studies that show a relation between the CME speed and the soft X-ray emission of the flare measured by the Geostationary Operational Environmental Satellite (GOES) and extend them to higher flare intensities and shock speeds. The time lag between the peak of the flare and of the CME speed is up to a few tens of minutes. We find that for several well-observed shock onsets, a clear correlation is visible between the derivative of the soft X-ray flux and the acceleration of the shock wave.

Kinetostatic Modeling of Tendon-Driven Parallel Continuum Robots

Tendon-driven parallel continuum robots (PCR) consist of multiple individual continuous kinematic chains, that are actuated in bending utilizing tendons routed along their backbones. This work derives and proposes a Cosserat rod based kinetostatic modeling framework for such parallel structures that allows for efficiently solving the forward, inverse and velocity kinetostatic problems. Using this model, the kinematic properties such as reachable workspace, singularities, manipulability, and compliance of tendon-driven PCR are studied in detail. Experiments are conducted using a real robotic prototype to validate the derived modeling approach. Overall, a median pose accuracy of 4.9 mm, corresponding to 3.4% of the continuum robots' lengths, and 6.2 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$^\circ$</tex-math></inline-formula> is achieved. The median of the model's computation time results in 0.51 s on standard computing hardware. Fast computations of below 100 ms can be achieved, if an appropriate initial guess for solving the kinetostatic model is available, making the model suitable for a range of different applications including optimization or control.

Tracing the kinematics of the whole ram-pressure-stripped tails in ESO 137-001

ABSTRACT Ram pressure stripping (RPS) is an important process to affect the evolution of cluster galaxies and their surrounding environment. We present a large MUSE mosaic for ESO 137-001 and its stripped tails, and study the detailed distributions and kinematics of the ionized gas and stars. The warm, ionized gas is detected to at least 87 kpc from the galaxy and splits into three tails. There is a clear velocity gradient roughly perpendicular to the stripping direction, which decreases along the tails and disappears beyond ∼45 kpc downstream. The velocity dispersion of the ionized gas increases to ∼80 km s−1 at ∼20 kpc downstream and stays flat beyond. The stars in the galaxy disc present a regular rotation motion, while the ionized gas is already disturbed by the ram pressure. Based on the observed velocity gradient, we construct the velocity model for the residual galactic rotation in the tails and discuss the origin and implication of its fading with distance. By comparing with theoretical studies, we interpreted the increased velocity dispersion as the result of the oscillations induced by the gas flows in the galaxy wake, which may imply an enhanced degree of turbulence there. We also compare the kinematic properties of the ionized gas and molecular gas from ALMA, which shows they are co-moving and kinematically mixed through the tails. Our study demonstrates the great potential of spatially resolved spectroscopy in probing the detailed kinematic properties of the stripped gas, which can provide important information for future simulations of RPS.

Chemical diversity of gas in distant galaxies

The chemical composition of gas in galaxies can be measured in great detail using absorption spectroscopy. By studying gas in galaxies in this way, it is possible to investigate small and faint galaxies, which are the most numerous in the universe. In particular, the chemical distribution of gas in absorbing systems gives us insight into cycles of gas in and around galaxies. In this work we study chemical enrichment within 64 damped Lyman-α absorption systems (DLAs) for redshifts in the range 1.7 &lt; z &lt; 4.2. We use high-resolution spectra from VLT/UVES to infer dust depletion from relative abundances of several metals. Specifically, we performed a component-by-component analysis within DLAs, and characterised variations in their chemical enrichment. Unlike hydrogen, the metal columns can be characterised according to their individual components. We used them to derive the dust depletion, which is an indicator of chemical enrichment. Our main results are as follows. Firstly, we find that some DLAs are chemically diverse within themselves (with the measure of dust depletion [Zn/Fe]fit ranging up to 0.62 dex within a single system), suggesting that the absorbing gas within these galaxies is chemically diverse. Secondly, although we do not find a clear trend of decreasing dust depletion with redshift, we do see that the most chemically enriched systems are at lower redshifts. We also observe evidence for dust-poor components at all redshifts, which may be due to the accretion of pristine gas onto galaxies. By combining the chemical and kinematic properties of the individual gas components, we observe potential signatures of infalling gas with low depletion at velocities below ∼100 km s−1, and outflows with high depletion and velocities of ∼600 km s−1. Finally, we find over-abundances of α-elements (an enhancement of ∼0.3 dex) and under-abundances of Mn in several gas components, which is likely a signature of core-collapse supernovae nucleosythesis in the ISM. We observe these effects mostly at lower levels of chemical enrichment.

Made-to-measure modelling of globular clusters

ABSTRACT We present the first application of the made-to-measure method for modelling dynamical systems to globular clusters. Through the made-to-measure algorithm, the masses of individual particles within a model cluster are adjusted while the system evolves forward in time via a gravitational N-body code until the model cluster is able to reproduce select properties of an observed cluster. The method is first applied to observations of mock isotropic and anisotropic clusters while fitting against the cluster’s 3D or projected density profile, density weighted mean-squared velocity profile, or its density profile with individual mean-squared velocity profiles assuming $10 {{\ \rm per\ cent}}$ uncertainty in each of these observables. We find that a cluster’s 3D density profile can easily be reproduced by the made-to-measure method, with minor discrepancies in the outer regions if fitting against a cluster’s projected surface density or projected kinematic properties. If an observed cluster is anisotropic, only fitting against the cluster’s density profile and individual mean-squared velocity profiles will fully recover the full degree of anisotropy. Partial anisotropy can be recovered as long as two kinematic properties are included in the fit. We further apply the method to observations of the Galactic globular cluster M4 and generate a complete 6D representation of the cluster that reproduces observations of its surface density profile, mean-squared proper motion velocity profile, and mean-squared line of sight velocity profile. The M2M method predicts M4 is primarily isotropic with a mass of $9.2\pm 0.4\times 10^4\, \mathrm{ M}_{\odot }$ and a half-mass radius of 3.7 ± 0.1 pc.

The 2022 Mw 6.7 Menyuan Earthquake on the Northeastern Margin of the Tibetan Plateau, China: Complex Surface Ruptures and Large Slip

ABSTRACT On 8 January 2022, the Mw 6.7 Menyuan earthquake occurred near the stepover of the Lenglongling (LLLF) and Tuolaishan (TLSF) faults of the Qilian–Haiyuan fault zone in the middle of the northeastern Tibetan plateau. Field investigations and unmanned aerial vehicle-based photogrammetry revealed that the earthquake generated five surface rupture zones with different strikes and kinematic properties. Two large rupture zones, R1 (∼22.8 km long) and R2 (∼3.9 km long), occurred along the northern branch of the western LLLF and the eastern segment of TLSF, respectively, and featured left-lateral strike slips. Among the three small rupture zones, the left-lateral strike-slip-type R3 (0.6 km long) was located in the extension direction of R2, whereas the thrust-type R4 (∼3.3 km long) and R5 (∼1.1 km long) zones were located north of the central section of R1. These complex multifault ruptures were caused mainly by the rupture of strike-slip faults on both sides of the stepover structure. A small amount of compressive shortening strain was released during the earthquake due to regional oblique compression. The total length of the rupture zone was ∼31.7 km; the maximum left-lateral and vertical offsets were 3.5 ± 0.3 and 0.47 ± 0.04 m, respectively. Compared with the relationship observed between coseismic slips and magnitudes in historical and modern earthquakes in western China, the 2022 Menyuan earthquake produced a large coseismic slip in relation to its magnitude. The distribution characteristics of the aftershock belts and their relationship with rupture zones showed that the seismogenic fault of the earthquake was nearly east–west-striking TLSF, which may have triggered the rupture of the northern branch of the western LLLF. In addition, only a small segment of TLSF was ruptured, indicating that the accumulated strain could not be released completely during the earthquake and that this remains the most likely area for the occurrence of large earthquakes in the future.

The study of hypersurface-homogeneous space-time in Renyi holographic dark energy

The investigation of this work is carried on the hypersurface-homogeneous space-time in the presence of two fluids, one being the pressureless matter and the other being the Renyi holographic dark energy (RHDE). Eventually, this work solves the cosmological model with Renyi HDE by taking the Hubble horizon as an infrared (IR) cutoff ([Formula: see text]). The geometrical and matter parts of space-time are solved within the Saez–Ballester scalar-tensor theory of gravitation. Interestingly, this study obtains a time-varying deceleration parameter ([Formula: see text]) that exhibits a transition from deceleration to acceleration phase. For the configurations of parameter [Formula: see text] emerging in space-time, three physically plausible cosmological hypotheses of the cosmos are outlined in this work. The kinematical properties were obtained and discussed for the three values of [Formula: see text]. The study of cosmic expansion in the accelerated phase of this work is done through various cosmological parameters like EoS, deceleration parameter, statefinder parameter, etc. The Hubble parameter is derived in terms of cosmic time and redshift both. The present value of this parameter is estimated by taking [Formula: see text] point data sets of observational Hubble data (OHD). The stability of the model is verified through the analysis of squared speed of sound ([Formula: see text]) parameter. In this work, the obtained results match with recent observational data.

Robust clustering of the local Milky Way stellar kinematic substructures with Gaia eDR3

ABSTRACT Understanding local stellar kinematic substructures in the solar neighbourhood helps build a complete picture of the formation of the Milky Way, as well as an empirical phase space distribution of dark matter that would inform detection experiments. We apply the clustering algorithm hdbscan on the Gaia early third data release to identify a list of stable clusters in velocity space and action-angle space by taking into account the measurement uncertainties and studying the stability of the clustering results. We find 1405 (497) stars in 23 (6) robust clusters in velocity space (action-angle space) that are consistently not associated with noise. We discuss the kinematic properties of these structures and study whether many of the small clusters belong to a similar larger cluster based on their chemical abundances. They are attributed to the known structures: the Gaia Sausage-Enceladus, the Helmi Stream, and globular cluster NGC 3201 are found in both spaces, while NGC 104 and the thick disc (Sequoia) are identified in velocity space (action-angle space). Although we do not identify any new structures, we find that the hdbscan member selection of already known structures is unstable to input kinematics of the stars when resampled within their uncertainties. We therefore present the stable subset of local kinematic structures, which are consistently identified by the clustering algorithm, and emphasize the need to take into account error propagation during both the manual and automated identification of stellar structures, both for existing ones as well as future discoveries.