Kind Of Microalgae Research Articles

Evaluation of Paste and Dried Microalgae Biomass and Its Nutritional Value During Storage

Microalga has recently attracted considerable attention researchers and bio-industries for its potential nutrition properties as feed and food. Three kinds of microalgae namely Spirulina sp., Chaetoceros sp., and Chlorella sp., which have a potency to develop as a source of nutrition, were experimented to grow on the laboratory scale. Their biomass product was concentrated in the form of biomass paste and then dried in vacuum condition at 45°C. Biomass products were stored in paste and dry form for four weeks at 4°C. The result of the experiment showed that there were cells and nutritional changes during storage. After storage for 4 weeks, the viable cells on biomass paste detected were 60% and 46% for Chaetoceros sp. and Chlorella sp., respectively. Cell fragmentation of Spirulina sp. was occurred, on the other side, during storage. The protein content of biomass paste of microalgae and dried biomass as well were not significantly changed during storage, but the content of β-carotene and the antioxidant capacity of the biomass decreased during storage.

Electrochemical Performance of Nitrogen Self-Doping Carbon Materials Prepared by Pyrolysis and Activation of Defatted Microalgae.

Pyrolysis and activation processes are important pathways to utilize residues after lipid extraction from microalgae in a high-value way. The obtained microalgae-based nitrogen-doped activated carbon has excellent electrochemical performance. It has the advantage of nitrogen self-doping using high elemental nitrogen in microalgae. In this study, two kinds of microalgae, Nanochloropsis and Chlorella, were used as feedstock for lipid extraction. The microalgae residue was firstly pyrolyzed at 500 °C to obtain biochar. Then, nitrogen-doped activated carbons were synthesized at an activation temperature of 700-900 °C with different ratios of biochar and KOH (1:1, 1:2, and 1:4). The obtained carbon materials presented rich nitrogen functional groups, including quaternary-N, pyridine-N-oxide, pyrrolic-N, and pyridinic-N. The nitrogen content of microalgae-based activated carbon material was up to 2.62%. The obtained materials had a specific surface area of up to 3186 m2/g and a pore volume in the range of 0.78-1.54 cm3/g. The microporous pore sizes of these materials were distributed at around 0.4 nm. Through electrochemical testing such as cyclic voltammetry and galvanostatic charge-discharge of materials, the materials exhibited good reversibility and high charge-discharge efficiency. The sample, sourced from microalgae Chlorella residue at activation conditions of 700 °C and biochar/KOH = 1:4, exhibited excellent endurance of 94.1% over 5000 cycles at 2 A/g. Its high specific capacitance was 432 F/g at 1 A/g.

Effects of Polyethylene Microplastics on Growth and Halocarbon Release of Marine Microalgae

Volatile halocarbons (VHCs) are important trace greenhouse gases and ozone-destroying substances and play an important role in global climate change. As an important producer of VHCs, the release of VHCs by marine microalgae is affected by marine environmental factors. Microplastics are an important pollutant in the ocean; however, there are few studies on VHCs release from marine microalgae under the influence of microplastics. This study aimed to explore the effects of different concentrations of polyethylene (PE) microplastics on the growth, photosynthesis, oxidative stress, and release of VHCs by diatoms and dinoflagellates by measuring the density of algae, maximum photoquantum efficiency (Fv/Fm), reactive oxygen species (ROS), and concentration of VHCs. The results revealed that PE microplastics mainly inhibited the growth of Nitzschia closterium f. minutissima and promoted the growth of Prorocentrum donghaiense. The addition of 50 μm PE microplastics had a shielding effect on the growth of the two microalgae, resulting in the inhibition of Fv/Fm of two kinds of microalgae, and the inhibition effect of PE microplastics on P. donghaiense was more significant. Compared with that in the control group, PE microplastic stress stimulated the increase in ROS production in algal cells, which caused an oxidative stress response in these microalgae, thereby promoting the release of three types of volatile brominated halocarbons.

Effects of Marine Microalgae on the Developmental Growth of the Sea Urchin Larviculture Anthocidaris crassipina

The sea urchin is a very important aquatic economic organism in many countries and has high food value. However, it has recently been heavily fished, and it would be of great importance to the sustainable development of coral reefs to develop large-scale aquaculture of sea urchins. Sea urchins are prone to death during larval development. Therefore, in this study, three kinds of microalgae were used as the initial food for sea urchins to evaluate whether different kinds of microalgae can improve their survival and growth rates. Chaetoceros muelleri (C), Isochrysis galbana tml (I), and Dunaliella salina (D) were fed to A. crassipina at concentrations of 5000, 10,000, 20,000, and 30,000 cell mL−1. A fasted group was used as control (N). The final body length, final body width, final stomach length, rudiment length, survival rate and morphology were measured to evaluate development and growth. The results showed that feeding with C. muelleri resulted in better growth and survival. After 9 days of feeding with C(20,000 cells mL−1), the rudiment length reached 203.33 ± 12.47 µm. The onset of metamorphosis was observed 12 days post-feeding. The survival rate after feeding C was also significantly higher than that after feeding I and D. In summary, when sea urchins are breeding, it is recommended to choose C(20,000 cells mL−1) or C(30,000 cells mL−1) as the initial feed for larvae to increase the growth and survival of sea urchin seedlings.

Research on the Tolerance and Degradation of o-Cresol by Microalgae

o-Cresol shows high toxicity and stability. To explore a better degradation method of o-cresol, the degradation of o-cresol by three kinds of microalgae (Selenastrum capricornutum, Scenedesmus obliquus, and Microcystis aeruginosa) was researched in this paper. The growth status and degradation rate were used to reflect the tolerance and degradation effect of microalgae. The effects of the medium’s initial pH, microalgal density, and different exogenous pollutants on the degradation of o-cresol by Selenastrum capricornutum were investigated. The results showed that Selenastrum capricornutum had the best degradation effect on o-cresol. microalgal density increased after adaptation to different concentrations of o-cresol for some time. At pH 7.0 as the initial condition, the microalgal exhibited the best results of degradation. When the microalgal density OD680 was 0.20, o-cresol was the first to be completely degraded within 5 days. At higher initial concentrations of o-cresol, the microalgae preferentially degraded glucose to promote the growth of the microalgae under mixotrophic cultivation. Selenastrum capricornutum could degrade phenol and o-cresol at the same time, and the degradation was completed within 8 days when the initial concentration of o-cresol and phenol were 100 and 120 mg/L. It was proven that the degradation of o-cresol by Selenastrum capricornutum is feasible under suitable conditions.

Novel insights into indoor air purification capability of microalgae: characterization using multiple air quality parameters and comparison with common methods.

Indoor air purification received more attention recently. In this study, the effects of six common indoor ornamental plants (Epripremnum aureum, Chlorphytum comosum, Aloe vera, Sedum sediforme, Cereus cv. Fairy Castle, and Sedum adolphii) and three kinds of microalgae (Chlorella sp. HQ, Scenedesmus sp. LX1, and C. vulgaris) on the removal of four types of air pollutants (particulate matters less than 2.5 (PM2.5) and 10 μm (PM10) in size, formaldehyde (HCHO) and total volatile organic compounds (VOCS)) in test chamber compared with common physical purification methods (high efficiency particulate air filter and nano activated carbon absorption) were investigated. Their effects on oxygen, carbon dioxide, and relative humidity were also evaluated. The results showed that microalgae, especially C. vulgaris, was more suitable for removing PM2.5 and PM10, and the removal rates were 55.42 ± 25.77% and 45.76 ± 5.32%, respectively. The removal rates of HCHO and VOCs by all three kings of microalgae could reach 100%. Part of ornamental plants took a longer time to achieve 100% removal of HCHO and VOCs. Physical methods were weaker than ornamental plants and microalgae in terms of increased relative humidity and O2 content. In general, microalgae, especially C. vulgaris could purify indoor air pollutants more efficiently. The above studies provided data and theoretical support for the purification of indoor air pollutants by microalgae.

Machine learning for microalgae detection and utilization

Microalgae are essential parts of marine ecology, and they play a key role in species balance. Microalgae also have significant economic value. However, microalgae are too tiny, and there are many different kinds of microalgae in a single drop of seawater. It is challenging to identify microalgae species and monitor microalgae changes. Machine learning techniques have achieved massive success in object recognition and classification, and have attracted a wide range of attention. Many researchers have introduced machine learning algorithms into microalgae applications, and similarly significant effects are gained. The paper summarizes recent advances based on various machine learning algorithms in microalgae applications, such as microalgae classification, bioenergy generation from microalgae, environment purification with microalgae, and microalgae growth monitor. Finally, we prospect development of machine learning algorithms in microalgae treatment in the future.

Effects of light source and inter-species mixed culture on the growth of microalgae and bacteria for nutrient recycling and microalgae harvesting using black odorous water as the medium.

To achieve the sustainable and effective removal efficiency of nutrients in black odorous water, light source, inter-species microalgae mixed culture, and the harvesting effect were all explored. The results showed that under a LED light source, the addition of interspecific soluble algal products (SAP) promoted the growth of Haematococcus pluvialis (H. pluvialis) M1, and its maximum specific growth rate was 1.76 times that of H. pluvialis cultivated alone. That was due to the hormesis effect between the two kinds of microalgae, the SAP produced by Scenedesmus could stimulate the growth of H. pluvialis. The algae and bacteria symbiotic system with black odorous water as the medium showed excellent performance to treat nutrients, where the concentration of ammonia nitrogen (NH3-N) and total phosphorus (TP) (0.84, 0.23mg/L) met the requirements of landscape water. The microbial diversity analysis revealed that the introduction of microalgae changed the dominant species of the bacterial community from Bacteroidota to Proteobacteria. Furthermore, timely microalgae harvesting could prevent water quality from deteriorating and was conducive to microalgae growth and resource recycling. The higher harvest efficiency (98.1%) of H. pluvialis was obtained when an inoculation size of 20% and 0.16g/L FeCl3 were provided.

Growth Performance and Antioxidative Response of Chlorella pyrenoidesa, Dunaliella salina, and Anabaena cylindrica to Four Kinds of Ionic Liquids

Ionic liquids are widely used for lipid and pigment extractions from microalgae. It is possible that ionic liquids are discharged into environments. The evaluation of growth performance and antioxidative response of ionic liquids to microalgae is helpful to explore the stress regulation mechanism and investigate possible environmental risk. Ionic liquids induce production of reactive oxygen species (ROS) to microalgae. These oxidative stresses are possible from cations, anions, and salinity. In this study, the growth inhibitions of [BMIM]Br, [BMIM]Cl, [EMIM]Cl, and [EMIM]EtOSO3 to Anabaena cylindrica, Chlorella pyrenoidesa, and Dunaliella salina were evaluated. It was interesting that Br- and two kinds of cations, [BMIM] and [EMIM], had significant effects on growth inhibitions of these microalgae. IC50 values of these ionic liquids for A. cylindrica, C. pyrenoidesa, and D. salina were also estimated based on the results of growth inhibitions. It was proved that [EMIM]Cl is relatively harmless to C. pyrenoidesa and D. salina, and [EMIM]EtOSO3 is relatively or practically harmless to C. pyrenoidesa. [BMIM]Br and [BMIM]Cl are practically harmless to A. cylindrica and C. pyrenoidesa, and relatively harmless to D. salina. More than 0.8 g/L [EMIM]EtOSO3 led to bleaching of both A. cylindrica and D. salina at 48 h which was shown that the anion, EtOSO3-, had higher inhibition to A. cylindrica and D. salina than Cl-. In addition, high concentration of ionic liquids led to reductions of chlorophyll content in these three kinds of microalgae, increase of ROS levels and malondialdehyde contents for most of the cases. High concentration of ionic liquids also increased the activities of superoxide dismutase in three kinds of microalgae. There were positive correlations between ROS levels or MDA content, and inhibitions ratios of these ionic liquids to microalgae except [EMIM]Cl to A. cylindrica. These antioxidant enzymes were beneficial for reducing the ROS induced by ionic liquids.

Effect of Food Containing Paramylon Derived from Euglena gracilis EOD-1 on Fatigue in Healthy Adults: A Randomized, Double-Blind, Placebo-Controlled, Parallel-Group Trial.

Euglena gracilis EOD-1, a kind of microalgae, is known to contain a high proportion of paramylon, a type of β-1,3-glucan. Paramylon derived from E. gracilis EOD-1 is presumed to suppress cellular oxidative injury and expected to reduce fatigue and fatigue sensation. Therefore, we aimed to examine whether food containing paramylon derived from E. gracilis EOD-1 (EOD-1PM) ingestion reduced fatigue and fatigue sensation in healthy adults. We conducted a randomized, double-blind, placebo-controlled, parallel-group comparison study in 66 healthy men and women who ingested a placebo or EOD-1PM daily for 4 weeks (daily life fatigue). Furthermore, at the examination days of 0 and 4 weeks, tolerance to fatigue load was evaluated using mental tasks (task-induced fatigue). We evaluated fatigue sensation using the Visual Analogue Scale, the work efficiency of the advanced trail making test and measured serum antioxidant markers. The EOD-1PM group showed significantly lower levels of physical and mental fatigue sensations and higher levels of work efficiency as well as serum biological antioxidant potential levels than the placebo group. These results indicate that EOD-1PM ingestion reduced fatigue and fatigue sensation, which may be due to an increase in antioxidant potential and maintenance of selective attention during work.

Microalgae pyrolysis under isothermal and non-isothermal conditions

The present work analyzes and compares the non-isothermal and isothermal pyrolysis processes of two different kinds of microalgae: Spirulina platensis and Chlorella pyrenoidosa. The non-isothermal pyrolysis process is carried out in a Thermogravimetric Analyzer (TGA), whereas a macro-TGA bubbling fluidized bed reactor is used for the isothermal pyrolysis reaction. The simplified Distributed Activation Energy Model (DAEM) is employed to derive the kinetic parameters of the reaction in the TGA, i.e., the pre-exponential factor and the activation energy. A consecutive reaction, first-order pyrolysis model with three competitive pseudo-components for the released pyrolysis vapors is proposed to evaluate the isothermal pyrolysis experiments conducted in a macro-TGA bubbling fluidized bed. The fluidized bed experimental setup allows measuring the real-time mass evolution during the microalgae pyrolysis process, which could be used to obtain the kinetic parameters of the different reactions of which the consecutive reaction model is comprised. The activation energies of the reactions using this isothermal pyrolysis model are in good agreement, both qualitatively and quantitatively, with those obtained from the non-isothermal pyrolysis measurements run in the TGA. A quantitative comparison reveals that the TGA measurements could be employed to provide a useful first estimation of the activation energy of the isothermal pyrolysis process in the bubbling fluidized bed. Qualitatively, the Differential Thermogravimetric (DTG) curves obtained from the thermogravimetric analysis revealed the presence of three peaks in the Chlorella pyrenoidosa DTG curve and two peaks in the Spirulina platensis DTG curve, which is in agreement with the number of pseudo-component reactions in the isothermal pyrolysis model. This indicates the capability of the non-isothermal pyrolysis tests in a TGA to predict the number of reactions required to characterize the isothermal pyrolysis process.

Sequent production of proteins and biogas from Chlorella sp. via CO2 assisted hydrothermal treatment and anaerobic digestion

Abstracts Chlorella sp., as a kind of microalgae with high proteins content and rigid cell walls, is a potential material for proteins recovery as poultry feed supplement source. This study proposed an algal biorefinery paradigm for sequent production of proteins and biogas from microalgae Chlorella sp. via CO2 assisted hydrothermal treatment and anaerobic digestion. The CO2 could be sustainably refilled as being a bioproduct of biogas. As a widely-used environmentally benign hydrothermal catalyst, the addition of CO2 could reduce treatment temperature and CO2 is easily removed by depressurizing. Microalgal cells were more disrupted with rising temperature from 70 °C to 150 °C, which facilitated the recovery of proteins. The recovery of proteins increased from 6.32% to 69.81%. After proteins recovery, the C/N ratio of microalgal residues was significantly higher than the untreated Chlorella sp. The process of proteins recovery could relieve the hydrolysis limitation of cell walls but reduce organics remained in microalgal residues. Biomethane production from microalgal residues exhibited a similar rising trend to proteins recovery. The highest cumulative biomethane production of 194.63 mL/gVS was achieved for the group at 130 °C, and the lowest value of 104.42 mL/gVS was obtained for the group at 70 °C. Excess microalgal cells disruption and side reactions led to the poor biomethane performance for the group at 150 °C, consistent with the decreased proteins recovery. During anaerobic digestion, the concentration of acetic acid distributed in a range of 0.05–0.44 g/L, which was dominant among total volatile fatty acids. The proteins as poultry feed supplement would be preferable to be considered as the main product, and the biomethane was considered as the side product. Carbon balance analysis revealed that most groups could basically meet the CO2 demand for HTT except the group at 150 °C. 130 °C was considered as the favorable treatment temperature level, leading to a proteins yield of 0.41 g/gVS and biomethane yield of 91.47 mL/gVS by Chlorella sp.

Bioactive significance of fucoxanthin and its effective extraction

Fucoxanthin (Fx) is a major carotenoid present in the chloroplasts of brown seaweeds and some kinds of microalgae. Because of the beneficial health effects of Fx, much attention has been focused on the considerable potential and promising applications of this compound in human health. Among the wide variety of biological activities of Fx, the interest has been mainly focused on its antiobesity effect, which is primarily based on the upregulation of thermogenesis through uncoupling protein 1 expression. Therefore, much effort has been made on the exploration for better Fx sources from different kinds of brown seaweeds and microalgae. The effective method to separate Fx has also attracted the interest of numerous researchers. Fx is conventionally extracted using organic solvents; however, solvents of petroleum origin are now strictly regulated worldwide. Thus, there is a growing demand for using greener, bio-based and renewable solvents for the extraction. From this viewpoint, edible oils may be promising green solvents. Edible oils can reduce the energy consumption in the extraction process and produce a barrier against Fx degradation. The edible oil extracts from brown seaweeds can be directly used as functional food materials containing Fx, without the need for purification.

Experimental study and economic feasibility analysis on the production of bio-oil by catalytic cracking of three kinds of microalgae

Bio-oil from microalgae has attracted attention for its extraordinary raw material utilization advantages and environmentally friendly characteristics. In order to increase the renewable energy utilization efficiency of microalgae biomass, research on the production line of microalgae cultivation and pyrolysis is essential. In this study, three high lipid content microalgae strains, including Micractinium reisseri, Scenedesmus obliquus SAG276-10 and Scenedesmus obliquus FACHB-276, have been selected to examine their capacity for crude bio-oil production under different pyrolysis conditions. The calculation of economic feasibility showed that M. reisseri comprised the most efficient energy conversion among considered strains. Gas Chromatography-Mass Spectrometry (GC–MS) analysis revealed a significant difference in the composition of crude bio-oil produced by non-catalytic and catalytic pyrolysis. The application of HZSM-5 increased the hydrocarbon content of the M. reisseri and S. obliquus FACHB-276 and decreased the ether and ester content of S. obliquus SAG276-10 upon pyrolysis when compared with non-catalytic pyrolysis. Although the use of MCM-41 was detrimental to the formation of hydrocarbons and increased the content of nitrogen-containing compounds, the mixture of HZSM-5 and MCM-41 greatly elevated the hydrocarbon content of S. obliquus SAG276-10 and S. obliquus FACHB-276.

Screening of cryoprotectants (CPAs) for cryopreservation in the Nitzschia sp. of marine microalgae

Biodiversity has continued to degrade in the 21st century due to global warming occasioned by destruction of the environment around the world.. The Nagoya protocol places Korea in a unique position to effectively develop and protect its domestic genetic resources. Microalgae under study in this research contains large amount of antioxidant substances such as beta carotene and astaxanthin, that can be used as biological resource owing to the large amounts of biomass that can be secured through photosynthesis. However, it is difficult to preserve it since cryopreservation method used for long-term preservation is yet to be developed. A basic study for long term cryopreservation was carried out on Nizschia frustulum and Nitzschia amabilis which belong to marine diatoms. As cryoprotectants (CPAs), glycerol, DMSO, and methanol which penetrate into cells were prepared at 5%, 10%, and 15% concentrations each, in case of methanol, it was tested at concentrations of 5%, 10% and 12% by its nature. Two kinds of microalgae, N. frustulum and N. amabilis, were diluted with 102, 103 and 104 cells ml-1, respectively. The highest survival rate was shown at12% concentration of methanol, and the figures were 6.94 ± 0.31% in N. frustulum and 8.85 ± 0.16% in N. amabilis. As a result of 3 weeks cultivation of thawed microalgae after freezing, the result is shows that N. frustulum increased about 10 times faster and N. amabilis increased about 12 times the original concentration.

Effect of oil spill on compound-specific stable carbon isotope composition of amino acid in Nitzschia closterium and Heterosigma akashiwo

Marine microalgae, the most important primary producers in marine ecosystems, are susceptible to toxicants and usually selected as the promising organisms for chemical risk testing. The stable carbon isotope ratios (δ13C) of amino acids (AAs) were measured to determine if compound-specific stable isotope analysis could be used to provide insight into the toxic effects of oil spill on the marine microalgae. The water accommodated fractions (WAF) of #180 fuel oil were selected as the toxic targets with different concentrations in acute (96 h) toxic tests. Naphthalene, phenanthrene, anthracene, and fluoranthene were detected as the predominant congeners of polycyclic aromatic hydrocarbons in the WAF, and may be the main toxic components. At the same WAF concentration, the δ13C values of leucine in Nitzschia closterium increased with the culture time, whereas decreased in Heterosigma akashiwo. However, with the increasing WAF concentrations, the δ13C values of glutamic acid exhibited the increasing trend in both of the two kinds of microalgae at the same culture time. The similar phenomenon was also observed for histidine in H. akashiwo, while opposite in N. closterium, but both enriching in δ13C compared to the controlled experiments without the WAF. Under the different culture times and WAF concentrations, the δ13C values of alanine and methionine showed unexpected trend. These findings indicated that the synthesis pathways of AA in microalgae cells were affected by the WAF, thus leading to the carbon isotopic fractionation in AAs. The present study provide a novel approach to explore the toxicity mechanism of primary producers under oil spill stress, and monitor and evaluate the marine ecological risk of oil spill pollution.

The Separation of Microalgae Using Dean Flow in a Spiral Microfluidic Device

A cell-in-droplet encapsulation using Dean flow in a spiral microfluidic device was applied to separate microalgae. In recent years, researchers have been interested in separating micro particles using microfluidic chips because of its great advantages in relation to various applications such as in biotechnology, medical examination, and cell studies. The main disadvantage of these microfluidic chips is particle clogging that decreases the separation yield, which then creates difficulties during the investigation of the particles. The microfluidic chip that is introduced in this work is a combination of two distinct designs—a spiral microchannel design to separate microalgae of various sizes, and a microdroplet generation design for cell encapsulation. The yield of the separation is enhanced through the concept of dominant forces (Dean drag force and lift force) in a spiral microchannel design, together with a design of the microdroplet generation that narrows the volume to facilitate cell observation. We report the development of cells, particle separation, and microdroplet generation. Using the spiral microchannel design can solve the clogging problem by distributing the microalgae evenly for the microdroplet generation section. A spiral microfluidics design was used as a separator for the different sized particles and a microdroplets generation design was used to encapsulate the separated particles. As for the design for the microdroplets generation section, a 3-way microchannel was designed. In this research, two kinds of microalgae have been used: the smaller one is chlorella vulgaris and the bigger one is cosmarium. Because of all of these benefits, this device might be an alternative for cell applications using droplet-based platforms. With a different channel height design, the separation efficiency for Chlorella vulgaris is about 75–80% and for Cosmarium is about 60–72%.

Two Mychonastes isolated from freshwater bodies are novel potential feedstocks for biodiesel production

ABSTRACTMicroalgae have been considered as ideal feedstocks for biodiesel production but the potential application is still under investigations. Here, eight kinds of microalgae were identified from water samples based on the morphologic and phylogenetic analyses. Among these eight microalgae, two Mychonastes S4 and S15 exhibited relative faster growth rate in the early culture stage and the highest contents of lipids. The two Mychonastes also showed higher C18:1 contents than the two Chlorella which were traditionally considered to be potential species for biodiesel production. As one kind of less researched microalgae, this study suggests Mychonastes should be a potential feedstock for biodiesel production. The application of the microalgal biodiesel still have some limiting factors, however, it is promising based on better lipid extraction technology and more relevant studies.

Rheological Analysis of Live and Dead Microalgae Suspensions

We investigate the rheological properties of microalgae suspensions that are currently being used in various applications. Two kinds of microalgae, chlorella and Synechococcus, were used for preparation of the suspensions, and their rheological characteristics were analyzed experimentally. In order to evaluate the viability of algae, we performed live and dead tests using trypan blue staining assays. Morphological analyses for the algae were conducted using a scanning electron microscope (SEM) and an optical microscope (OP). We examined the viscoelastic behavior of the live and the dead algae suspensions by performing dynamic oscillatory shear tests.

Utilization of Microalgae Cultivated in Palm Oil Mill Wastewater to Produce Lipid and Carbohydrate by Employing Microwave- Assisted Irradiation

Background: Palm oil mill effluent (POME) is dominant agroindustrial wastewater in Indonesia and Malaysia. Some kind of microalgae can utilize the wastewater as media of cultivation, and produce value-added compounds. However, the production of lipid and carbohydrate from microalgae cultivated on untreated POME medium were not clearly reported. Keywords: Carbohydrate, lipid, microalgae, microwave, palm oil mill effluent.