Key Reaction Intermediates Research Articles

Construction of a copper-bismuth catalyst featuring Bi-N4 sites and synergistic Bi clusters derived from TCPP(Bi)@HKUST-1 for enhanced formaldehyde to butynediol

The construction of functional catalysts that efficiently catalyze in a reducing atmosphere is considered rather challenging. In this study, the catalysts bridged by Bi-N4 between copper and bismuth species were prepared. Herein, Bi-N4 and bismuth cluster sites were incorporated into porous carbon–nitrogen networks along with copper nanoparticles (BiSAC&Clu-Cu-NC). For the synthesis, metalloporphyrin-modified HKUST-1 (TCPP(Bi)@HKUST-1) was employed as a precursor. Additionally, metalloporphyrin functioned as a capping agent during catalyst preparation, thereby enhancing the dispersion of Bi species after calcination. Notably, the BiSAC&Clu-Cu-NC catalyst demonstrated 93.8 % selectivity towards 1,4-butynediol over 20 h at a Bi loading of 0.6 wt% in a reducing atmosphere of acetylene and formaldehyde. Furthermore, a mechanistic model is proposed that elucidates the observed synergistic catalytic behavior based on experimental characterization and DFT calculations. This proposed model is termed “Nanoparticles with Cluster and Single Metal Sites”(NCS mechanism). The retention of the Bi cluster structure within the material matrix plays a pivotal role in enhancing the adsorption and activation of formaldehyde. Interfacial effects between different copper species favour the activation of the reaction substrate acetylene. Additionally, the Bi-N4 structure can function as a crucial conduit, facilitating electron transfer between Cu and Bi elements and consequently lowering the activation energy barrier for key reaction intermediates.

Semiclassical Transition State Theory (SCTST) Rate Coefficients for the Unimolecular Decomposition of the Ethoxy (CH3CH2O) Radical.

The thermal unimolecular decay of ethoxy is important in high-temperature combustion environments where the ethoxy radical is a key reactive intermediate. Two dissociation pathways of ethoxy, including the β-C-C scission to yield CH3 + CH2O and the H-elimination to make H + CH3CHO, were characterized using a high-level coupled-cluster-based composite quantum chemical method (mHEAT-345(QΛ)). The former route is found to be dominant while the latter is insignificant, in agreement with previous experimental and theoretical studies. Thermal rate coefficients are calculated for P = 0.001-658 atm (of air) and T = 300-2500 K using semiclassical transition state theory (SCTST) in combination with a pragmatic two-dimensional E,J-resolved master equation (2DME). The effects of tunneling and anharmonicity on the calculated rate constants are also examined. The tunneling factor is found to be inversely dependent on pressure, contrary to previous observations of pressure-dependent tunneling in entrance channels.

Recent Insights into the Reaction Mechanisms of Non-Heme Diiron Enzymes Containing Oxoiron(IV) Complexes.

Oxoiron(IV) complexes are key intermediates in the catalytic reactions of some non-heme diiron enzymes. These enzymes, across various subfamilies, activate dioxygen to generate high-valent diiron-oxo species, which, in turn, drive the activation of substrates and mediate a variety of challenging oxidative transformations. In this review, we summarize the structures, formation mechanisms, and functions of high-valent diiron-oxo intermediates in eight representative diiron enzymes (sMMO, RNR, ToMO, MIOX, PhnZ, SCD1, AlkB, and SznF) spanning five subfamilies. We also categorize and analyze the structural and mechanistic differences among these enzymes.

Reductive Amination of Carbonyl C-C Bonds Enables Formal Nitrogen Insertion.

Given its relevance across numerous fields, reductive amination is one of the oldest and most widely used methods for amine synthesis. As a cornerstone of synthetic chemistry, it has largely remained unchanged since its discovery over a century ago. Herein, we report the mechanistically driven development of a complementary reaction, which reductively aminates the C-C σ-bond of carbonyls, not the carbonyl C-O π-bond, generating value-added linear and cyclic 3° amines in a modular fashion. Critical to our success were mechanistic insights that enabled us to modulate the resting state of a borane catalyst, minimize deleterious disproportionation of a hydroxylamine nitrogen source, and control the migratory selectivity of a key nitrenoid reactive intermediate. Experiments support the reaction occurring through a reductive amination/reductive Stieglitz cascade, via a ketonitrone, which can be interrupted under catalyst control to generate valuable N,N-disubstituted hydroxylamines. The method reported herein enables net transformations that would otherwise require lengthy synthetic sequences using pre-existing technologies. This is highlighted by its application to a two-step protocol for the valorization of hydrocarbon feedstocks, the late-stage C-C amination of complex molecules, diversity-oriented synthesis of isomeric amines from a single precursor, and transposition of nitrogen to different positions within a heterocycle.

Nocturnal atmospheric synergistic oxidation reduces the formation of low-volatility organic compounds from biogenic emissions

Abstract. Volatile organic compounds (VOCs) are often subject to synergistic oxidation by different oxidants in the atmosphere. However, the exact synergistic-oxidation mechanism of atmospheric VOCs and its role in particle formation remain poorly understood. In particular, the reaction kinetics of the key reactive intermediates, organic peroxy radicals (RO2), during synergistic oxidation is rarely studied. Here, we conducted a combined experimental and kinetic modeling study of the nocturnal synergistic oxidation of α-pinene (the most abundant monoterpene) by O3 and NO3 radicals as well as its influences on the formation of highly oxygenated organic molecules (HOMs) and particles. We find that in the synergistic O3 + NO3 regime, where OH radicals are abundantly formed via decomposition of ozonolysis-derived Criegee intermediates, the production of CxHyOz HOMs is substantially suppressed compared to that in the O3-only regime, mainly because of the depletion of α-pinene RO2 derived from ozonolysis and OH oxidation by those arising from NO3 oxidation via cross reactions. Measurement–model comparisons further reveal that the cross-reaction rate constants of NO3-derived RO2 with O3-derived RO2 are on average 10–100 times larger than those of NO3-derived RO2 with OH-derived RO2. Despite a strong production of organic nitrates in the synergistic-oxidation regime, the substantial decrease in CxHyOz HOM formation leads to a significant reduction in ultralow- and extremely low-volatility organic compounds, which significantly inhibits the formation of new particles. This work provides valuable mechanistic and quantitative insights into the nocturnal synergistic-oxidation chemistry of biogenic emissions and will help to better understand the formation of low-volatility organic compounds and particles in the atmosphere.

Electrochemically driven nonheme iron complex-catalyzed oxidation reactions using water as an oxygen source

High-valent metal-oxo species have been invoked as key intermediates in enzymatic and biomimetic oxidation reactions. The generation of high-valent metal-oxo species using water (H2O) as an oxygen source represents one of the most environmentally friendly approaches in developing biologically inspired oxidation catalysis. Herein, we report the electrochemical oxidation of benzylic C−H bonds and alcohols utilizing a mononuclear nonheme iron(III)-monoamidate complex [FeIII(dpaq)(H2O)]2+ (dpaq = 2-[bis(pyridin-2-ylmethyl)]amino-N-quinolin-8-yl-acetamidate) as a catalyst and H2O as an oxygen source. Selective benzylic C−H bond oxidation of alkanes to ketones was achieved in 43–85 % yields, and primary and secondary alcohols were converted to the corresponding aldehydes and ketones, respectively, in 46–95 % yields. The generation of an iron(V)-oxo species [FeV(O)(dpaq)]2+ from proton-coupled electron-transfer (PCET) oxidation of the iron(III) aqua complex [FeIII(dpaq)(H2O)]2+ was evidenced by cyclic voltammetry analysis; the iron(V)-oxo species [FeV(O)(dpaq)]2+ was recently detected using transient absorption spectroscopy in water oxidation reactions. Mechanistic studies revealed that electrochemical oxidation of alcohols catalyzed by FeIII(dpaq) is a two-electron oxidation process, hydrogen-atom transfer (HAT) from the α-C−H bond of alcohols by iron(V)-oxo species is the rate-determining step, and there is a remarkable charge transfer from the highly electrophilic iron(V)-oxo species to the alcohols in the HAT step. This research paves a significant groundwork aimed at developing electrochemically driven biomimetic asymmetric oxidation reactions catalyzed by nonheme metal complexes supported by chiral ligands.

In Situ Synthesis of Copper-Based Metal-Organic Frameworks with Ligand Defects for Electrochemical Reduction of CO2 into C2 Products.

Electrochemical reduction of CO2 into high-value-added products is a potential approach to solving environmental problems but is limited by poor product selectivity and low efficiency. Metal-organic framework (MOF) materials have been considered one of the most promising catalysts, but their application is limited by complicated preparation processes, especially during the synthesis of organic ligands. In this work, a new three-dimensional Cu-MOF (JXUST-301) with high porosity was constructed based on the naphthalene diimide (NDI) ligand. Furthermore, JXUST-301 with ligand defects (JXUST-301D) originating from the missing NDI unit was synthesized via an in situ reaction. The presence of ligand defects endows JXUST-301D with a better CO2RR performance with a FEC2 of 56.7% and a jC2 of -162.4 mA cm-2. Mechanistic studies revealed that the hierarchical pore structure and amino sites are created from the absence of the NDI unit, which promotes the exposure of catalytically active sites and CO2 enrichment. Furthermore, the electronic structure of the Cu sites is modulated to upshift the d-band center, facilitating chemical adsorption and activation of key reaction intermediates. This work provides new insight into the in situ preparation of efficient Cu-MOF catalysts by introducing defects for the CO2RR.

Catalyst-Free [4+1] Annulation of α-Imidoyl Sulfoxonium Ylides and Diazo Compounds Enabling the Modular Synthesis of 2-Indanones and 3(2H)-Furanones.

A novel substrate-regulated [4+1] annulation of α-imidoyl sulfoxonium ylides with diazoketones under catalyst-free conditions is described. The reaction proceeds through a coupling of sulfoxonium ylides and in situ-generated ketenes to form the key reactive zwitterionic intermediates, followed by selective formation of C-C or C-O bonds to achieve five-membered ring systems. The cascade reaction permits the direct synthesis of synthetically useful 2-indanones and 3(2H)-furanones, which expands the reaction pattern of sulfoxonium ylides in annulation transformation.

Unraveling the Potential Dependence of Active Structures and Reaction Mechanism of Ni‐based MOFs Electrocatalysts for Alkaline OER

AbstractNickel‐based metal‐organic frameworks (MOFs) with flexible structure units provide a broad platform for designing highly efficient electrocatalysts, especially for alkaline oxygen evolution reaction (OER). However, the stability of MOFs under harsh and dynamic reaction conditions poses significant challenges, resulting in ambiguous structure‐activity relationships in MOFs‐based OER research. Herein, Ni‐benzenedicarboxylic acid‐based MOF (NiBDC) is selected as prototypical catalyst to elucidate its real active sites for OER and reaction pathway under different reaction states. Electrochemical measurements combined with X‐ray absorption spectroscopy (XAS) and Raman spectroscopy reveal that the complete reconstruction of NiBDC to β‐NiOOH in the chronoamperometry activation process is responsible for significantly increased OER performance. In situ XAS and Raman results further demonstrate the electro‐oxidation of β‐NiOOH into γ‐NiOOH at high‐potential state (above 1.6 V vs RHE). Furthermore, the collective evidences from key reaction intermediates and isotope‐labeled products definitely unravel the potential dependence of OER mechanism: OER process at low‐potential state proceeds mainly through the lattice oxygen‐mediated mechanism, while adsorbate evolution mechanism emerges as the predominant pathway at high‐potential state. Interestingly, the dynamically changing OER mechanism can not only reduce the required overpotential at the low‐potential state but also improve the electrochemical stability of catalysts at high‐potential state.

A high-throughput screening of catalyst for efficient nitrogen fixation: Transition metal single-atom anchored on an emerging synthesized biphenyl network

Synthesizing efficient and selective green ideal catalysts has been an increasingly critical, yet unsolved, issue for the ammonia synthesis industry, hindering the growing global demand for environmental protection and energy efficiency. Electrocatalytic nitrogen reduction reaction (eNRR) is a promising technology for low-energy ammonia synthesis. However, designing efficient electrocatalysts for NRR remains challenging. The emergence of graphene-like substrates offers exciting prospects for addressing this challenge and facilitating single-atom catalysts in eNRR. Here, we report the innovative selection of a recently synthesized two-dimensional biphenyl network (2D BPN) compound as a substrate. Its excellent conductivity and porosity enable stable transition metal atoms (TMs) support for constructing eNRR electrocatalysts. we evaluated the feasibility of 23 TMs anchored on BPN for eNRR by high-throughput first-principles calculations. Through a systematic five-step strategy, we identified several single-atom catalysts (SACs) with potential for eNRR, including Mo@BPN, V@BPN, W@BPN, and Re@BPN. Among them, Mo@BPN exhibited the best balance in the adsorption of key reaction intermediates (e.g., N2H and NH3) and demonstrated a low limiting potential (-0.37 V). In addition, the underlying mechanism of NRR activity was elucidated by analyzing the extrinsic patterns revealed through the screened catalysts. A triangular volcano diagram, incorporating the initial protonation step, adsorption free energy, and final protonation step, revealed the NRR activity trend. Overall, this study provides a solid theoretical foundation and valuable guidance for future experimental exploration of efficient electrocatalysts for ammonia synthesis on BPN. Crucial insights into the theoretical design of efficient electrocatalysts are also offered.

New role of radical-induced polymerization: Base/self-heating synergistically activate persulfate to boost food waste humification

Radical-induced polymerization in persulfate (PS)-based advanced oxidation process (AOP) is attracting attention in water decontamination. Herein, we revealed its new role in rapid recycling of perishable food wastes using KOH activated PS. A glucose (Glu) solution of 250 g C/L was applied to mimic the carbohydrate-rich raw material with 50–60% moisture in conventional composting, wherein boosted humification occurred after addition of solid KOH/PS. Intense heat release (from 25 to 79.4 °C), mainly generated from KOH dissolving and exothermic radical chain polymerization, was observed within 2 min. Solid KOH addition contributed to synergistic PS activation by base and self-heating, realizing complete PS decomposition and fulvic like acid (FLA, 210.8 g C/L) formation within 10 min. Extracted FLA promoted cucumber seed germination and fresh weight of chickweeds by 40.0% and 128.3%, respectively. Identified •OH and SO4•- played primary roles in FLA formation through aromatization, carboxylation, and polymerization, wherein several key reactive intermediates such as 5-hydroxymethylfurfural and aromatic radicals (i.e. 1,2,4-benzenetriol radical) were formed. Moreover, the humification process simultaneously produced K2SO4 (i.e. the end product of PS decomposition) which could be used as a typical K/S fertilizer. Scaling-up humification of waste cooked rice and fertilization results further supported the potential of solid KOH/PS in efficiently converting food wastes into FLA and K+-rich compound fertilizer.

Mechanically Differentiated Lithium Versus Sodium Ion Storage in an Alloying‐Type Bismuth Anode

AbstractSodium‐ion battery (SIB) research benefits from lithium‐ion battery (LIB) studies due to Li and Na thermodynamic similarities. However, underneath these thermodynamic considerations lie kinetics factors leading to distinct Na+ versus Li+ storage mechanisms even within the same electrode materials, which is ascribed to either ionic size variations or diffusion path differences. Herein, the library of such non‐negligible factors is extended by targeting an alloying‐type bismuth anode well known for its high volumetric capacity for both Li+ and Na+ storage, showing that the mechanical property of key reaction intermediates also plays a role in differentiating its Na+ versus Li+ storage mechanisms. Applying spatially and temporally resolved in situ transmission electron microscopy to Li+ and Na+ storage within bismuth, it not only demonstrates the thermodynamic similarity in a step‐wise phase transition but also discloses its kinetic distinctions in morphological and structural integrities determined by Young's modulus of involving reaction intermediates and spatial configuration, which well accounts for the surprisingly observed superior Na+ storage performance of Bi anode compared to the inferior Li+ storage. Findings here highlight the role of reaction intermediates’ mechanical properties in regulating the overall cycling durability of electrode materials, and guide future material engineering toward performance enhancement, particularly for SIBs.

Atomically dispersed nickel-bismuth dual-atom sites for high rate electrochemical CO2 reduction

We report a diatomic-site catalyst configuration constituted by Ni-N3 and Bi-N4 embedded in ultrathin nitrogenated carbon nanosheets (Ni/Bi-N-C) which showed dramatically improved activity and selectivity for the conversion of CO2 to CO. Specifically, the catalyst exhibited high CO Faradaic efficiency (FECO) of above 90 % over a wide potential window from −0.76 to −2.22 versus reversible hydrogen electrode with the maximum CO partial current density up to 312 mA cm−2 in a flow cell, and coupled with robust durability. Ni/Bi-N-C-based membrane electrode assembly (MEA) device presented ultrahigh FECO of 95.7 % at 750 mA and over 100 h of continuous operation without decay under constant current density of 100 mA cm−2. Mechanistic studies and density functional theory calculations reveal that regulating the CO2RR catalytic performance via nearby Ni and Bi active sites can potentially break the activity benchmark of the single metal counterparts because the neighboring Ni and Bi active sites work in synergy to decrease the reaction barrier for the formation of *COOH and desorption of *CO. This work presents an efficient combination of two metal atomic sites which was designed by optimizing the interaction between the atomic sites and key reaction intermediates, resulting in the high-rate electrocatalytic CO2 reduction.

Vanadium-doped FeO/NiS nanosheet arrays: Synergistic heterometal doping and heterostructure design for enhanced oxygen evolution catalysis

The quest for high-performance OER electrocatalysts has been a focal point in the field of energy conversion and storage. Despite the promise shown by nickel sulfide-based materials, the enhancement of their catalytic activity through singular strategies has been found to be inadequate for achieving the desired comprehensive performance improvements. In this context, we introduce a novel V-doped FeO/NiS nanosheet array (V-FeO/NiS/NF) synthesized through a synergistic approach involving heteroatom doping and heterostructure engineering. This advanced material exhibits structural integrity, a three-dimensional nanosheet morphology, and superior electrical conductivity, which collectively contribute to its exceptional electrochemical performance. The V-FeO/NiS/NF electrode can reach a current density of 10 mA cm−2 with an impressively low overpotential of 213 mV and sustains its activity for an extended period of 196 hours, surpassing the stability and efficiency of many electrodes. Theoretical insights reveal that vanadium doping significantly lowers the adsorption free energy of key reaction intermediates, thereby facilitating the OER process. This study not only presents a robust and efficient OER electrocatalyst but also paves the way for the design of advanced, cost-effective nickel-based sulfide catalysts through strategic heteroatom incorporation and structural optimization.

Mechanism Insights into Allylic Hydroxylation versus Epoxidation of Propene Catalyzed by Model Catalyst Iron Phthalocyanine in the Presence of Hydrogen Peroxide.

High-valent metal-oxo species are key reactive intermediates in many biological and biological oxidation reactions. Herein, allylic hydroxylation (C-H) versus epoxidation (C═C) reactions of propene with a model catalyst iron phthalocyanine (FePc) in the presence of hydrogen peroxide were investigated contrastively, aiming to probe the active intermediates, structure-activity relationship, and reaction pathways. Our results showed that H2O2 as an oxygen-donor reagent can be easily decomposed on FePc to produce key active intermediates O═FePc and O═FePc═O with the energy barriers of 19.57 and 23.89 kcal/mol, respectively. In the selective oxidation of propene, O═FePc has a small preference for C═C epoxidation over C-H hydroxylation while O═FePc═O has a small preference for C-H hydroxylation. Since the electron-withdrawing O axial ligand in O═FePc═O further increases the radical character (Fe-O·) and Fe-O bond length of the iron-oxo moiety, O═FePc═O has better catalytic performance in both C═C epoxidation and C-H hydroxylation than O═FePc. Furthermore, in the whole reaction processes, the dual-hydrogen bonds between the two terminal H atoms of the alkene and allylic groups of propene and oxygen atom of the iron-oxo moiety would lead to the reaction toward C═C epoxidation while the single-hydrogen bond between the terminal H atom of the allylic group and the oxygen atom of the iron-oxo moiety would lead to the reaction toward C-H hydroxylation, implying that the weakly interacting hydrogen bonds affecting oxidation pathways also play a very important role in the regioselectivity of C═C epoxidation and C-H hydroxylation.

Dual Polarization of Ni Sites at VOx-Ni3N Interface Boosts Ethanol Oxidation Reaction.

Substituting thermodynamically favorable ethanol oxidation reaction (EOR) for oxygen evolution reaction (OER) engenders high-efficiency hydrogen production and generates high value-added products as well. However, the main obstacles have been the low activity and the absence of an explicit catalytic mechanism. Herein, a heterostructure composed of amorphous vanadium oxide and crystalline nickel nitride (VOx-Ni3N) is developed. The heterostructure immensely boosts the EOR process, achieving the current density of 50mA cm-2 at the low potential of 1.38V versus reversible hydrogen electrode (RHE), far surpassing the sluggish OER (1.65V vs RHE). Electrochemical impedance spectroscopy indicates that the as-fabricated heterostructure can promote the adsorption of OH- and the generation of the reactive species (O*). Theoretical calculations further outline the dual polarization of the Ni site at the interface, specifically the asymmetric charge redistribution (interfacial polarization) and in-plane polarization. Consequently, the dual polarization modulates the d-band center, which in turn regulates the adsorption/desorption strength of key reaction intermediates, thereby facilitating the entire EOR process. Moreover, a VOx-Ni3N-based electrolyzer, coupling hydrogen evolution reaction (HER) and EOR, attains 50mA cm-2 at a low cell voltage of ≈1.5V. This work thus paves the way for creating dual polarization through interface engineering toward broad catalysis.

Synthesis, Reactivity, and Bonding Analysis of a Tetracoordinated Nickel Carbene.

Nickel carbenes are key reactive intermediates in the catalytic cyclopropanation of olefins and other reactions, but isolated examples are scarce and generally rely on low coordination numbers (≤3) to stabilize the metal-ligand multiple bond. Here we report the isolation and characterization of a stable tetracoordinated nickel carbene bearing a triphosphine pincer ligand. Its nucleophilic character is evidenced by reaction with acids, and it can transfer the carbene fragment to CO to form a ketene. A computational study of the Ni=C chemical bond sheds light on the role of the third phosphine in the pincer framework to the stabilization of the nickel carbene fragment.

Magnetic Activation: A Novel Approach to Enhance Hydrogen Evolution Activity of Co0.85Se@CNTs Heterostructured Catalyst.

The heterostructure strategy is currently an effective method for enhancing the catalytic activity of materials. However, the challenge that is how to further improve their catalytic performance, based on the principles of material modification is must addressed. Herein, a strategy is introduced for magnetically regulating the catalytic activity to further enhance the hydrogen evolution reaction (HER) activity for Co0.85Se@CNTs heterostructured catalyst. Building on heterostructure modulation, an external alternating magnetic field (AMF) is introduced to enhance the electronic localization at the active sites, which significantly boosts catalytic performance (71 to 43mV at 10mA cm-2). To elucidate the catalytic mechanism, especially under the influence of the AMF, in situ Raman spectroscopy is innovatively applied to monitor the HER process of Co0.85Se@CNTs, comparing conditions with and without the AMF. This study demonstrates that introducing the AMF does not induce a change in the true active site. Importantly, it shows that the Lorentz force generated by the AMF enhances HER activity by promoting water molecule adsorption and O─H bond cleavage, with the Stark tuning rate indicating increased water interaction and bond cleavage efficiency. Theoretical calculations further support that the AMF optimizes energy barriers for key reaction intermediates (steps of *H2O-TS and *H+*1/2H2).

Electrified Operando-Freezing of Electrocatalytic CO2 Reduction Cells for Cryogenic Electron Microscopy.

The ability to freeze and stabilize reaction intermediates in their metastable states and obtain their structural and chemical information with high spatial resolution is critical to advance materials technologies such as catalysis and batteries. Here, we develop an electrified operando-freezing methodology to preserve these metastable states under electrochemical reaction conditions for cryogenic electron microscopy (cryo-EM) imaging and spectroscopy. Using Cu catalysts for CO2 reduction as a model system, we observe restructuring of the Cu catalyst in a CO2 atmosphere while the same catalyst remains intact in air at the nanometer scale. Furthermore, we discover the existence of a single valence Cu (1+) state and C-O bonding at the electrified liquid-solid interface of the operando-frozen samples, which are key reaction intermediates that traditional ex situ measurements fail to detect. This work highlights our novel technique to study the local structure and chemistry of electrified liquid-solid interfaces, with broad impact beyond catalysis.

Coupling Ir single atom with NiFe LDH/NiMo heterointerface toward efficient and durable water splitting at large current density

Developing efficient and robust bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at large current density is important to facilitate the industrial water splitting. Herein, a promising strategy is presented to couple Ir single atom with NiFe LDH/NiMo heterointerface. IrSA-NiFe LDH/NiMo requires ultralow overpotentials of 139/236 mV and 350/450 mV to deliver large current densities of 500 and 1000 mA cm−2 for HER/OER in 1 M KOH. Moreover, the electrode shows remarkable durability of 10000 cycles and long-term durability at 500 mA cm−2 over 500 h for both HER and OER. The water electrolyzer exhibits a low cell voltage of 1.84 V to attain 500 mA cm−2. The theoretical calculations decipher that the Ir single atom modulates the electronic property of catalyst, which tunes the adsorption strength of the key reaction intermediates and boosts the overall water splitting.