Coronal Hole Jets Research Articles

Multiwavelength study of on-disk coronal-hole jets with IRIS and SDO observations

Context. Solar jets are an important field of study, as they may contribute to the mass and energy transfer from the lower to the upper atmosphere. Aims. We use the Interface Region Imaging Spectrograph (IRIS) and Solar Dynamic Observatory (SDO) observations to study two small-scale jets (jet 1 and jet 2) originating in the same on-disk coronal hole observed in October 2013. Methods. We combine dopplergrams, intensity maps, and line width maps derived from IRIS Si IV 1393.755 Å spectra along with images from the Atmospheric Imaging Assembly (AIA) on SDO to describe the dynamics of the jets. Images from AIA, with the use of the emission measure loci technique and rectangular differential emission measure (DEM) distributions, provide estimations of the plasma temperatures. We used the O IV 1399.77 Å, 1401.16 Å spectral lines from IRIS to derive electron densities. Results. For jet 1, the SDO images show a small mini-filament 2 minutes before the jet eruption, while jet 2 originates at a pre-existing coronal bright point. The analysis of asymmetric spectral profiles of the Si IV 1393.755 Å and 1402.770 Å lines reveals the existence of two spectral components at both regions. One of the components can be related to the background plasma emission originating outside the jet, while the secondary component represents higher-energy plasma flows associated with the jets. Both jets exhibit high densities of the order of 1011 cm−3 at their base and 1010 cm−3 at the spire, respectively, as well as similar average nonthermal velocities of ∼50–60 km/s. However, the two jets show differences in their length, duration, and plane-of-sky velocity. Finally, the DEM analysis reveals that both jets exhibit multithermal distributions. Conclusions. This work presents a comprehensive description of the thermal parameters and the dynamic evolution of two jets. The locations of the asymmetric profiles possibly indicate the areas of energy release triggering the jets.

Inconspicuous Solar Polar Coronal X-Ray Jets as the Source of Conspicuous Hinode/EUV Imaging Spectrometer Doppler Outflows

We examine in greater detail five events previously identified as being sources of strong transient coronal outflows in a solar polar region in Hinode/Extreme Ultraviolet (EUV) Imaging Spectrometer (EIS) Doppler data. Although relatively compact or faint and inconspicuous in Hinode/X-ray Telescope (XRT) soft-X-ray (SXR) images and in Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) EUV images, we find that all of these events are consistent with being faint coronal X-ray jets. The evidence for this is that the events result from eruption of minifilaments of projected sizes spanning 5000–14,000 km and with erupting velocities spanning 19–46 km s−1, which are in the range of values observed in cases of confirmed X-ray polar coronal hole jets. In SXR images, and in some EUV images, all five events show base brightenings, and faint indications of a jet spire that (in four of five cases where determinable) moves away from the brightest base brightening; these properties are common to more obvious X-ray jets. For a comparatively low-latitude event, the minifilament erupts from near (≲few arcsec) a location of near-eruption-time opposite-polarity magnetic-flux-patch convergence, which again is consistent with many observed coronal jets. Thus, although too faint to be identified as jets a priori, otherwise all five events are identical to typical coronal jets. This suggests that jets may be more numerous than recognized in previous studies, and might contribute substantially to solar wind outflow, and to the population of magnetic switchbacks observed in Parker Solar Probe (PSP) data.

The Photospheric Footpoints of Solar Coronal Hole Jets

Abstract We study the photospheric footpoints of a set of 35 coronal jets in a coronal hole as observed by Hinode/EIS. We use SDO/AIA data to coalign the spectroscopic EIS data with SDO/HMI line-of-sight magnetograms and calculate the plane-of-sky flow field using local correlation tracking (LCT) on SDO/HMI white light images. The jets are put into categories according to the changes observed in the photospheric magnetic flux at the footpoints of the coronal bright point where the jets originate: flux cancellation, complex flux changes (flux appearance/emergence and cancellation), and no flux changes. We also present three jets in detail. Observed magnetic flux evolution, LCT flow field structure and location of the jet footpoints at supergranular boundaries do not support the flux emergence scenario used in most jet simulations and are also not consistent with a rotational photospheric driver. Detailed numerical jet simulations using our observed photospheric features, in particular converging flows and flux cancellation do not currently exist, although such models would provide a realistic eruptive event scenario.

From Pseudostreamer Jets to Coronal Mass Ejections: Observations of the Breakout Continuum

Abstract The magnetic breakout model, in which reconnection in the corona leads to destabilization of a filament channel, explains numerous features of eruptive solar events, from small-scale jets to global-scale coronal mass ejections (CMEs). The underlying multipolar topology, pre-eruption activities, and sequence of magnetic-reconnection onsets (first breakout, then flare) of many observed fast CMEs/eruptive flares are fully consistent with the model. Recently, we demonstrated that most observed coronal-hole jets in fan/spine topologies also are induced by breakout reconnection at the null point above a filament channel (with or without a filament). For these two types of eruptions occurring in similar topologies, the key question is, why do some events generate jets while others form CMEs? We focused on the initiation of eruptions in large bright points/small active regions that were located in coronal holes and clearly exhibited null-point (fan/spine) topologies: such configurations are referred to as pseudostreamers. We analyzed and compared Solar Dynamics Observatory/Atmospheric Imaging Assembly, Solar and Heliospheric Observatory/Large Angle and Spectrometric Coronagraph Experiment, and Reuven Ramaty High Energy Solar Spectroscopic Imager observations of three events. Our analysis of the events revealed two new observable signatures of breakout reconnection prior to the explosive jet/CME outflows and flare onset: coronal dimming and the opening up of field lines above the breakout current sheet. Most key properties were similar among the selected erupting structures, thereby eliminating region size, photospheric field strength, magnetic configuration, and pre-eruptive evolution as discriminating factors between jets and CMEs. We consider the factors that contribute to the different types of dynamic behavior, and conclude that the main determining factor is the ratio of the magnetic free energy associated with the filament channel compared to the energy associated with the overlying flux inside and outside the pseudostreamer dome.

Eruptions from coronal hole bright points: Observations and non-potential modelling

Context. We report on the third part of a series of studies on eruptions associated with small-scale loop complexes named coronal bright points (CBPs). Aims. A single case study of a CBP in an equatorial coronal hole with an exceptionally large size is investigated to expand on our understanding of the formation of mini-filaments, their destabilisation, and the origin of the eruption triggering the formation of jet-like features recorded in extreme ultraviolet (EUV) and X-ray emission. We aim to explore the nature of the so-called micro-flares in CBPs associated with jets in coronal holes and mini coronal mass ejections in the quiet Sun. Methods. Co-observations from the Atmospheric Imaging Assembly (AIA) and Helioseismic Magnetic Imager (HMI) on board the Solar Dynamics Observatory as well as GONG Hα images are used together with a non-linear force free field (NLFFF) relaxation approach, where the latter is based on a time series of HMI line-of-sight magnetograms. Results. A mini-filament (MF) that formed beneath the CBP arcade about 3−4 h before the eruption is seen in the Hα and EUV AIA images to lift up and erupt triggering the formation of an X-ray jet. No significant photospheric magnetic flux concentration displacement (convergence) is observed and neither is magnetic flux cancellation between the two main magnetic polarities forming the CBP in the time period leading to MF lift-off. The CBP micro-flare is associated with three flare kernels that formed shortly after the MF lift-off. No observational signature is found for magnetic reconnection beneath the erupting MF. The applied NLFFF modelling successfully reproduces both the CBP loop complex as well as the magnetic flux rope that hosts the MF during the build-up to the eruption. Conclusions. The applied NLFFF modelling is able to clearly show that an initial potential field can be evolved into a non-potential magnetic field configuration that contains free magnetic energy in the region that observationally hosts the eruption. The comparison of the magnetic field structure shows that the magnetic NLFFF model contains many of the features that can explain the different observational signatures found in the evolution and eruption of the CBP. In the future, it may eventually indicate the location of destabilisation that results in the eruptions of flux ropes.

Numerical simulation of helical jets at active region peripheries

ABSTRACT Coronal jets are observed above minority-polarity intrusions throughout the solar corona. Some of the most energetic ones occur on the periphery of active regions where the magnetic field is strongly inclined. These jets exhibit a non-radial propagation in the low corona as they follow the inclined field, and often have a broad, helical shape. We present a three-dimensional magnetohydrodynamic simulation of such an active-region-periphery helical jet. We consider an initially potential field with a bipolar flux distribution embedded in a highly inclined magnetic field, representative of the field nearby an active region. The flux of the minority polarity sits below a bald-patch separatrix initially. Surface motions are used to inject free energy into the closed field beneath the separatrix, forming a sigmoidal flux rope that eventually erupts producing a helical jet. We find that a null point replaces the bald patch early in the evolution and that the eruption results from a combination of magnetic breakout and an ideal kinking of the erupting flux rope. We discuss how the two mechanisms are coupled, and compare our results with previous simulations of coronal-hole jets. This comparison supports the hypothesis that the generic mechanism for all coronal jets is a coupling between breakout reconnection and an ideal instability. We further show that our results are in good qualitative and quantitative agreement with observations of active-region-periphery jets.

Magnetic Flux Cancellation as the Trigger Mechanism of Solar Coronal Jets

Abstract Coronal jets are transient narrow features in the solar corona that originate from all regions of the solar disk: active regions, quiet Sun, and coronal holes. Recent studies indicate that at least some coronal jets in quiet regions and coronal holes are driven by the eruption of a minifilament following flux cancellation at a magnetic neutral line. We have tested the veracity of that view by examining 60 random jets in quiet regions and coronal holes using multithermal (304, 171, 193, and 211 Å) extreme ultraviolet images from the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly and line-of-sight magnetograms from the SDO/Helioseismic and Magnetic Imager. By examining the structure and changes in the magnetic field before, during, and after jet onset, we found that 85% of these jets resulted from a minifilament eruption triggered by flux cancellation at the neutral line. The 60 jets have a mean base diameter of 8800 ± 3100 km and a mean duration of 9 ± 3.6 minutes. These observations confirm that minifilament eruption is the driver and magnetic flux cancellation is the primary trigger mechanism for most coronal hole and quiet region coronal jets.

How Rotating Solar Atmospheric Jets Become Kelvin–Helmholtz Unstable

Recent observations support the propagation of a number of magnetohydrodynamic (MHD) modes which, under some conditions, can become unstable and the developing instability is the Kelvin--Helmholtz instability (KHI). In its nonlinear stage the KHI can trigger the occurrence of wave turbulence which is considered as a candidate mechanism for coronal heating. We review the modeling of tornado-like phenomena in the solar chromosphere and corona as moving weakly twisted and spinning cylindrical flux tubes, showing that the KHI rises at the excitation of high-mode MHD waves. The instability occurs within a wavenumber range whose width depends on the MHD mode number \emph{m}, the plasma density contrast between the rotating jet and its environment, and also on the twists of the internal magnetic field and the jet velocity. We have studied KHI in two twisted spinning solar polar coronal hole jets, in a twisted rotating jet emerging from a filament eruption, and in a rotating macrospicule. The theoretically calculated KHI development times of a few minutes for wavelengths comparable to the half-widths of the jets are in good agreement with the observationally determined growth times only for high order (10 $\mathrm{\leqslant}$ \emph{m} $\mathrm{\leqslant}$ 65) MHD modes. Therefore, we expect that the observed KHI in these cases is due to unstable high-order MHD modes.

Multiwavelength Study of Equatorial Coronal-hole Jets

Abstract Jets (transient/collimated plasma ejections) occur frequently throughout the solar corona and contribute mass/energy to the corona and solar wind. By combining numerical simulations and high-resolution observations, we have made substantial progress recently on determining the energy buildup and release processes in these jets. Here we describe a study of 27 equatorial coronal-hole jets using Solar Dynamics Observatory/Atmospheric Imaging Assembly and Helioseismic and Magnetic Imager observations on 2013 June 27–28 and 2014 January 8–10. Out of 27 jets, 18 (67%) are associated with mini-filament ejections; the other nine (33%) do not show mini-filament eruptions but do exhibit mini-flare arcades and other eruptive signatures. This indicates that every jet in our sample involved a filament-channel eruption. From the complete set of events, six jets (22%) are apparently associated with tiny flux-cancellation events at the polarity inversion line, and two jets (7%) are associated with sympathetic eruptions of filaments from neighboring bright points. Potential-field extrapolations of the source-region photospheric magnetic fields reveal that all jets originated in the fan-spine topology of an embedded bipole associated with an extreme ultraviolet coronal bright point. Hence, all our jets are in agreement with the breakout model of solar eruptions. We present selected examples and discuss the implications for the jet energy buildup and initiation mechanisms.

IRIS and SDO Observations of Solar Jetlets Resulting from Network-edge Flux Cancelation

Abstract Recent observations show that the buildup and triggering of minifilament eruptions that drive coronal jets result from magnetic flux cancelation at the neutral line between merging majority- and minority-polarity magnetic flux patches. We investigate the magnetic setting of 10 on-disk small-scale UV/EUV jets (jetlets, smaller than coronal X-ray jets but larger than chromospheric spicules) in a coronal hole by using IRIS UV images and SDO/AIA EUV images and line-of-sight magnetograms from SDO/HMI. We observe recurring jetlets at the edges of magnetic network flux lanes in the coronal hole. From magnetograms coaligned with the IRIS and AIA images, we find, clearly visible in nine cases, that the jetlets stem from sites of flux cancelation proceeding at an average rate of ∼1.5 × 1018 Mx hr−1, and show brightenings at their bases reminiscent of the base brightenings in larger-scale coronal jets. We find that jetlets happen at many locations along the edges of network lanes (not limited to the base of plumes) with average lifetimes of 3 minutes and speeds of 70 km s−1. The average jetlet-base width (4000 km) is three to four times smaller than for coronal jets (∼18,000 km). Based on these observations of 10 obvious jetlets, and our previous observations of larger-scale coronal jets in quiet regions and coronal holes, we infer that flux cancelation is an essential process in the buildup and triggering of jetlets. Our observations suggest that network jetlet eruptions might be small-scale analogs of both larger-scale coronal jets and the still-larger-scale eruptions producing CMEs.

Simulated Encounters of the Parker Solar Probe with a Coronal-hole Jet

Abstract Solar coronal jets are small, transient, collimated ejections most easily observed in coronal holes (CHs). The upcoming Parker Solar Probe (PSP) mission provides the first opportunity to encounter CH jets in situ near the Sun and examine their internal structure and dynamics. Using projected mission orbital parameters, we have simulated PSP encounters with a fully three-dimensional magnetohydrodynamic (MHD) model of a CH jet. We find that three internal jet regions, featuring different wave modes and levels of compressibility, have distinct identifying signatures detectable by PSP. The leading Alfvén wave front and its immediate wake are characterized by trans-Alfvénic plasma flows with mild density enhancements. This front exhibits characteristics of a fast switch-on MHD shock, whose arrival is signaled by the sudden onset of large-amplitude transverse velocity and magnetic-field oscillations highly correlated in space and time. The trailing portion is characterized by supersonic but sub-Alfvénic outflows of dense plasma with uncorrelated velocity and magnetic-field oscillations. This compressible region contains most of the jet’s mass. The volume between the immediate wake and dense jet, the remote wake, mixes and transitions the characteristics of the two other regions. In addition to probing each region separately, we also simulate a corotational PSP-jet encounter. In this scenario, the simulated spacecraft hovers over the jet-producing CH, as may occur during the mission’s corotational phases, sampling each jet region in turn. We estimate that PSP will encounter numerous CH jets over the lifetime of the mission.

A Model for Coronal Hole Bright Points and Jets Due to Moving Magnetic Elements

Abstract Coronal jets and bright points occur prolifically in predominantly unipolar magnetic regions, such as coronal holes (CHs), where they appear above minority-polarity intrusions. Intermittent low-level reconnection and explosive, high-energy-release reconnection above these intrusions are thought to generate bright points and jets, respectively. The magnetic field above the intrusions possesses a spine-fan topology with a coronal null point. The movement of magnetic flux by surface convection adds free energy to this field, forming current sheets and inducing reconnection. We conducted three-dimensional magnetohydrodynamic simulations of moving magnetic elements as a model for coronal jets and bright points. A single minority-polarity concentration was subjected to three different experiments: a large-scale surface flow that sheared part of the separatrix surface only, a large-scale surface flow that also sheared part of the polarity inversion line surrounding the minority flux, and the latter flow setup plus a “flyby” of a majority-polarity concentration past the moving minority-polarity element. We found that different bright-point morphologies, from simple loops to sigmoids, were created. When only the field near the separatrix was sheared, steady interchange reconnection modulated by quasi-periodic, low-intensity bursts of reconnection occurred, suggestive of a bright point with periodically varying intensity. When the field near the polarity inversion line was strongly sheared, on the other hand, filament channels repeatedly formed and erupted via the breakout mechanism, explosively increasing the interchange reconnection and generating nonhelical jets. The flyby produced even more energetic and explosive jets. Our results explain several key aspects of CH bright points and jets, and the relationships between them.

Evidence for Precursors of the Coronal Hole Jets in Solar Bright Points

Abstract A set of 23 observations of coronal jet events that occurred in coronal bright points has been analyzed. The focus was on the temporal evolution of the mean brightness before and during coronal jet events. In the absolute majority of the cases either single or recurrent coronal jets (CJs) were preceded by slight precursor disturbances observed in the mean intensity curves. The key conclusion is that we were able to detect quasi-periodical oscillations with characteristic periods from sub-minute up to 3–4 minute values in the bright point brightness that precedes the jets. Our basic claim is that along with the conventionally accepted scenario of bright-point evolution through new magnetic flux emergence and its reconnection with the initial structure of the bright point and the coronal hole, certain magnetohydrodynamic (MHD) oscillatory and wavelike motions can be excited and these can take an important place in the observed dynamics. These quasi-oscillatory phenomena might play the role of links between different epochs of the coronal jet ignition and evolution. They can be an indication of the MHD wave excitation processes due to the system entropy variations, density variations, or shear flows. It is very likely a sharp outflow velocity transverse gradients at the edges between the open and closed field line regions. We suppose that magnetic reconnections can be the source of MHD waves due to impulsive generation or rapid temperature variations, and shear flow driven nonmodel MHD wave evolution (self-heating and/or overreflection mechanisms).

EVIDENCE FOR THE MAGNETIC BREAKOUT MODEL IN AN EQUATORIAL CORONAL-HOLE JET.

Small, impulsive jets commonly occur throughout the solar corona, but are especially visible in coronal holes. Evidence is mounting that jets are part of a continuum of eruptions that extends to much larger coronal mass ejections and eruptive flares. Because coronal-hole jets originate in relatively simple magnetic structures, they offer an ideal testbed for theories of energy buildup and release in the full range of solar eruptions. We analyzed an equatorial coronal-hole jet observed by SDO/AIA on 09 January 2014, in which the magnetic-field structure was consistent with the embedded-bipole topology that we identified and modeled previously as an origin of coronal jets. In addition, this event contained a mini-filament, which led to important insights into the energy storage and release mechanisms. SDO/HMI magnetograms revealed footpoint motions in the primary minority-polarity region at the eruption site, but show negligible flux emergence or cancellation for at least 16 hours before the eruption. Therefore, the free energy powering this jet probably came from magnetic shear concentrated at the polarity inversion line within the embedded bipole. We find that the observed activity sequence and its interpretation closely match the predictions of the breakout jet model, strongly supporting the hypothesis that the breakout model can explain solar eruptions on a wide range of scales.

Magnetic Flux Cancelation as the Trigger of Solar Coronal Jets in Coronal Holes

Abstract We investigate in detail the magnetic cause of minifilament eruptions that drive coronal-hole jets. We study 13 random on-disk coronal-hole jet eruptions, using high-resolution X-ray images from the Hinode/X-ray telescope(XRT), EUV images from the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA), and magnetograms from the SDO/Helioseismic and Magnetic Imager (HMI). For all 13 events, we track the evolution of the jet-base region and find that a minifilament of cool (transition-region-temperature) plasma is present prior to each jet eruption. HMI magnetograms show that the minifilaments reside along a magnetic neutral line between majority-polarity and minority-polarity magnetic flux patches. These patches converge and cancel with each other, with an average cancelation rate of ∼0.6 × 1018 Mx hr−1 for all 13 jets. Persistent flux cancelation at the neutral line eventually destabilizes the minifilament field, which erupts outward and produces the jet spire. Thus, we find that all 13 coronal-hole-jet-driving minifilament eruptions are triggered by flux cancelation at the neutral line. These results are in agreement with our recent findings for quiet-region jets, where flux cancelation at the underlying neutral line triggers the minifilament eruption that drives each jet. Thus, from that study of quiet-Sun jets and this study of coronal-hole jets, we conclude that flux cancelation is the main candidate for triggering quiet-region and coronal-hole jets.

The Mechanism for the Energy Buildup Driving Solar Eruptive Events

Abstract The underlying origin of solar eruptive events (SEEs), ranging from giant coronal mass ejections to small coronal-hole jets, is that the lowest-lying magnetic flux in the Sun’s corona undergoes continual buildup of stress and free energy. This magnetic stress has long been observed as the phenomenon of “filament channels:” strongly sheared magnetic field localized around photospheric polarity inversion lines. However, the mechanism for the stress buildup—the formation of filament channels—is still debated. We present magnetohydrodynamic simulations of a coronal volume that is driven by transient, cellular boundary flows designed to model the processes by which the photosphere drives the corona. The key feature of our simulations is that they accurately preserve magnetic helicity, the topological quantity that is conserved even in the presence of ubiquitous magnetic reconnection. Although small-scale random stress is injected everywhere at the photosphere, driving stochastic reconnection throughout the corona, the net result of the magnetic evolution is a coherent shearing of the lowest-lying field lines. This highly counterintuitive result—magnetic stress builds up locally rather than spreading out to attain a minimum energy state—explains the formation of filament channels and is the fundamental mechanism underlying SEEs. Furthermore, this process is likely to be relevant to other astrophysical and laboratory plasmas.

Solar Active Region Coronal Jets. II. Triggering and Evolution of Violent Jets

Abstract We study a series of X-ray-bright, rapidly evolving active region coronal jets outside the leading sunspot of AR 12259, using Hinode/X-ray telescope, Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) and Helioseismic and Magnetic Imager (HMI), and Interface Region Imaging Spectrograph (IRIS) data. The detailed evolution of such rapidly evolving “violent” jets remained a mystery after our previous investigation of active region jets. The jets we investigate here erupt from three localized subregions, each containing a rapidly evolving (positive) minority-polarity magnetic-flux patch bathed in a (majority) negative-polarity magnetic-flux background. At least several of the jets begin with eruptions of what appear to be thin (thickness ) miniature-filament (minifilament) “strands” from a magnetic neutral line where magnetic flux cancelation is ongoing, consistent with the magnetic configuration presented for coronal-hole jets in Sterling et al. (2016). Some jets strands are difficult/impossible to detect, perhaps due to, e.g., their thinness, obscuration by surrounding bright or dark features, or the absence of erupting cool-material minifilaments in those jets. Tracing in detail the flux evolution in one of the subregions, we find bursts of strong jetting occurring only during times of strong flux cancelation. Averaged over seven jetting episodes, the cancelation rate was Mx hr−1. An average flux of Mx canceled prior to each episode, arguably building up ∼1028–1029 erg of free magnetic energy per jet. From these and previous observations, we infer that flux cancelation is the fundamental process responsible for the pre-eruption build up and triggering of at least many jets in active regions, quiet regions, and coronal holes.

Kelvin–Helmholtz instability in a twisting solar polar coronal hole jet observed by SDO/AIA

We investigate the conditions under which the fluting (m=2), m=3, and m=12 magnetohydrodynamic (MHD) modes in a uniformly twisted flux tube moving along its axis become unstable in order to model the Kelvin–Helmholtz (KH) instability in a twisting solar coronal hole jet near the northern pole of the Sun. We employed the dispersion relations of MHD modes derived from the linearized MHD equations. We assumed real wavenumbers and complex angular wave frequencies, namely complex wave phse velocities. The dispersion relations were solved numerically at fixed input parameters (taken from observational data) and varying degrees of torsion of the internal magnetic field. It is shown that the stability of the modes depends upon five parameters: the density contrast between the flux tube and its environment, the ratio of the external and internal axial magnetic fields, the twist of the magnetic field lines inside the tube, the ratio of transverse and axial jet’s velocities, and the value of the Alfvén Mach number (the ratio of the tube axial velocity to Alfvén speed inside the flux tube). Using a twisting jet of 2010 August 21 by SDO/AIA and other observations of coronal jets we set the parameters of our theoretical model and have obtained that in a twisted magnetic flux tube of radius of 9.8Mm, at a density contrast of 0.474 and fixed Alfvén Mach number of ≅0.76, for the three MHD modes there exist instability windows whose width crucially depends upon the internal magnetic field twist. It is found that for the considered modes an azimuthal magnetic field of 1.3–1.4G (computed at the tube boundary) makes the width of the instability windows equal to zero, that is, it suppress the KH instability onset. On the other hand, the times for developing KH instability of the m=12 MHD mode at instability wavelengths between 15 and 12Mm turn out to be in the range of 1.9–4.7min that is in agreement with the growth rates estimated from the temporal evolution of the observed unstable jet’s blobs in their initial stage.

Reconnection-Driven Magnetohydrodynamic Turbulence in a Simulated Coronal-Hole Jet.

Extreme-ultraviolet and X-ray jets occur frequently in magnetically open coronal holes on the Sun, especially at high solar latitudes. Some of these jets are observed by white-light coronagraphs as they propagate through the outer corona toward the inner heliosphere, and it has been proposed that they give rise to microstreams and torsional Alfvén waves detected in situ in the solar wind. To predict and understand the signatures of coronal-hole jets, we have performed a detailed statistical analysis of such a jet simulated with an adaptively refined magnetohydrodynamics model. The results confirm the generation and persistence of three-dimensional, reconnection-driven magnetic turbulence in the simulation. We calculate the spatial correlations of magnetic fluctuations within the jet and find that they agree best with the Müller-Biskamp scaling model including intermittent current sheets of various sizes coupled via hydrodynamic turbulent cascade. The anisotropy of the magnetic fluctuations and the spatial orientation of the current sheets are consistent with an ensemble of nonlinear Alfvén waves. These properties also reflect the overall collimated jet structure imposed by the geometry of the reconnecting magnetic field. A comparison with Ulysses observations shows that turbulence in the jet wake is in quantitative agreement with that in the fast solar wind.

RECONNECTION-DRIVEN CORONAL-HOLE JETS WITH GRAVITY AND SOLAR WIND

ABSTRACT Coronal-hole jets occur ubiquitously in the Sun's coronal holes, at EUV and X-ray bright points associated with intrusions of minority magnetic polarity. The embedded-bipole model for these jets posits that they are driven by explosive, fast reconnection between the stressed closed field of the embedded bipole and the open field of the surrounding coronal hole. Previous numerical studies in Cartesian geometry, assuming uniform ambient magnetic field and plasma while neglecting gravity and solar wind, demonstrated that the model is robust and can produce jet-like events in simple configurations. We have extended these investigations by including spherical geometry, gravity, and solar wind in a nonuniform, coronal hole-like ambient atmosphere. Our simulations confirm that the jet is initiated by the onset of a kink-like instability of the internal closed field, which induces a burst of reconnection between the closed and external open field, launching a helical jet. Our new results demonstrate that the jet propagation is sustained through the outer corona, in the form of a traveling nonlinear Alfvén wave front trailed by slower-moving plasma density enhancements that are compressed and accelerated by the wave. This finding agrees well with observations of white-light coronal-hole jets, and can explain microstreams and torsional Alfvén waves detected in situ in the solar wind. We also use our numerical results to deduce scaling relationships between properties of the coronal source region and the characteristics of the resulting jet, which can be tested against observations.