Iterative Channel Research Articles

Iterative channel estimation-based soft successive interference cancellation for multiuser underwater acoustic communications.

This paper presents a single-carrier multiuser receiver in underwater acoustic communications with strong multiple access interference (MAI) combining passive time-reversal (PTR) and direct-adaptation-based turbo equalization. The receiver works in an iterative block by block manner. In the first iteration, when the symbols of all users are detected by successive interference cancellation (SIC) in the block, the channel impulse response (CIR) of each user is then updated by post-SIC signal to achieve more accurate MAI reconstruction and PTR combination for the next block. In the following iterations, the a priori mean of symbol in the current block is available and used to further improve the accuracy of reconstructed MAI and the updated CIR. The proposed receiver is demonstrated using experimental data collected at Songhua Lake, China, in 2019. The results show that single-carrier nine-user communication data with quadrature phase-shift keying can be successfully recovered, with an average data rate of 1.67 kbps for each user.

Iterative Hard Thresholding with Combined Variable Step Size & Momentum-Based Estimator for Wireless Communication Systems with Dynamic Sparse Channels

The channel of the broadband wireless communications system can be modeled as a dynamic sparse channel. Such a channel is difficult to reconstruct by using linear channel estimators that are normally employed for dense channels’ estimation because of their lack of capacity to use the inherent channel’s sparsity. This paper focuses on reconstructing this type of time-varying sparse channel by extending a recently proposed dynamic channel estimator. Specifically, variable step size’s mechanism and variable momentum parameter are incorporated into traditional Iterative Hard Thresholding-based channel estimator to develop the proposed Iterative Hard Thresholding with Combined Variable Step Size and Momentum (IHT-wCVSSnM)-based estimator. Computer simulations carried out in the context of a wireless communication system operating in a dynamic sparse channel, show that the proposed IHT-wCVSSnM-based estimator performs better than all the other estimators significantly. However, the computational complexity cost of the proposed estimator is slightly higher than the closely performing channel estimator. Nevertheless, the inherent complexity cost of the proposed estimator could be compromised in a situation where the system’s performance is of higher priority when compared with the computational complexity cost.

Joint Channel Estimation and Equalization Using New AFB Output Signal Models for FBMC/OQAM Systems

Filter bank multicarrier with offset quadrature amplitude modulation (FBMC/OQAM) has been studied as an alternative waveform for post-orthogonal frequency division multiplexing (OFDM) wireless communications. However, due to the intrinsic imaginary inter-carrier/inter-symbol interference of FBMC/OQAM signals, accurate channel estimation and equalization remain open issues for FBMC/OQAM systems in dispersive channels. In this article, two new signal models of the analysis filter bank (AFB) output are first derived in the absence of any channel assumption and in the presence of a relaxed channel assumption, respectively. Based on the new-built models, initial channel estimation with least squares (LS) (IniCE-LS) is presented and its output is used as the initial condition of recursive weighted LS (RWLS) estimation; moreover, non-iterative and iterative channel equalization combined with RWLS channel estimation (i.e., N-ICE-RWLS and ICE-RWLS) are proposed by using the real-time reconstructed FBMC/OQAM data symbols as pilots. The proposed N-ICE-RWLS and ICE-RWLS schemes not only allow to improve channel estimation and equalization performance, but also achieve high transmission efficiency. Considering the requirements of practical application, we further develop the low-complexity implementation methods of N-ICE-RWLS and ICE-RWLS. All these schemes are validated by analyzing the channel estimation accuracy and bit error rate (BER) over various frequency selective channels.

Simple Iterative Channel Coding and Modulation for Harbor Wireless Communications

Monitoring systems at the harbor require a simple communication technique to save battery energy, strong in error correction, and suitable to the harbor channel model, of which the channel is predicted to have more number of path. This paper proposes (i) a harbor channel model and (ii) a simple iterative repetition coding for harbor wireless communication of monitoring systems. The harbor channel model is derived using a series of computer simulations based on real-field harbor environmental parameters, while the proposed iterative channel coding is based on the repetition codes assisted by a doped accumulator (ACC) with a doping technique. Channel coding and doping rates are designed using an Extrinsic Information Transfer (EXIT) chart and are evaluated using a series of computer simulations in terms of Bit Error Rate (BER) and Frame Error Rate (FER) performances with an outage performance as the theoretical baseline for comparison. Since the EXIT curve of the repetition codes has steep curve, we use a non-Gray Quadrature Phase Shift Keying (QPSK) to achieve a better matching between the decoder and the demapper of harbor channels. We found that the proposed simple repetition codes and non-Gray demapper provide excellent performances for harbor communications with a cliff of BER curve. The results of this paper are expected to contribute to the development of a reliable wireless communications for the harbor monitoring applications.

Evolutionary Programming: A Population-Based Optimization Algorithm for Coded Multiuser Systems

We consider iterative channel detection and estimation for coded multiuser systems. The conventional A Posteriori Probability (APP) channel detector has a computational complexity growing exponentially with the number of users. In this paper, we study the channel detection problem from a combinatorial optimization viewpoint and derive a low-complexity soft-output channel detector based on the Evolutionary Programming (EP) optimization algorithm. An iterative channel estimator based on tentative soft estimates fed back from channel decoders is used to provide refined channel parameters to the channel detector. It is shown that the proposed iterative receiver can significantly reduce the computational complexity with slight performance degradation compared to the conventional receiver based on APP detection.

Grouping‐Based Channel Estimation and Tracking for Millimeter Wave Massive MIMO Systems

Although the millimeter wave (mmWave) massive multiple‐input and multiple‐output (MIMO) system can potentially boost the network capacity for future communications, the pilot overhead of the system in practice will greatly increase, which causes a significant decrease in system performance. In this paper, we propose a novel grouping‐based channel estimation and tracking approach to reduce the pilot overhead and computational complexity while improving the estimation accuracy. Specifically, we design a low‐complexity iterative channel estimation and tracking algorithm by fully exploiting the sparsity of mmWave massive MIMO channels, where the signal eigenvectors are estimated and tracked based on the received signals at the base station (BS). With the recovered signal eigenvectors, the celebrated multiple‐signal classification (MUSIC) algorithm can be employed to estimate the direction of arrival (DoA) angles and the path amplitude for the user terminals (UTs). To improve the estimation accuracy and accelerate the tracking speed, we develop a closed‐form solution for updating the step‐size in the proposed iterative algorithm. Furthermore, a grouping method is proposed to reduce the number of sharing pilots in the scenario of multiple UTs to shorten the pilot overhead. The computational complexity of the proposed algorithm is analyzed. Simulation results are provided to verify the effectiveness of the proposed schemes in terms of the estimation accuracy, tracking speed, and overhead reduction.

Bayesian Iterative Channel Estimation and Turbo Equalization for Multiple-Input–Multiple-Output Underwater Acoustic Communications

This article investigates a robust receiver scheme for a single carrier, multiple-input-multiple-output (MIMO) underwater acoustic (UWA) communications, which uses the sparse Bayesian learning algorithm for iterative channel estimation embedded in Turbo equalization (TEQ). We derive a block-wise sparse Bayesian learning framework modeling the spatial correlation of the MIMO UWA channels, where a more robust expectation-maximization algorithm is proposed for updating the joint estimates of channel impulse response, residual noise, and channel covariance matrix. By exploiting the spatially correlated sparsity of MIMO UWA channels and the second-order a priori channel statistics from the training sequence, the proposed Bayesian channel estimator enjoys not only relatively low complexity but also more stable control of the hyperparameters that determine the channel sparsity and recovery accuracy. Moreover, this article proposes a low complexity space-time soft decision feedback equalizer (ST-SDFE) with successive soft interference cancellation. Evaluated by the undersea 2008 Surface Processes and Acoustic Communications Experiment, the improved sparse Bayesian learning channel estimation algorithm outperforms the conventional Bayesian algorithms in terms of the robustness and complexity, while enjoying better estimation accuracy than the orthogonal matching pursuit and the improved proportionate normalized least mean squares algorithms. We have also verified that the proposed ST-SDFE TEQ significantly outperforms the low-complexity minimum mean square error TEQ in terms of the bit error rate and error propagation.

On the Performance of Wireless Video Communication Using Iterative Joint Source Channel Decoding and Transmitter Diversity Gain Technique

In this research work, we have presented an iterative joint source channel decoding- (IJSCD-) based wireless video communication system. The anticipated transmission system is using the sphere packing (SP) modulation assisted differential space-time spreading (DSTS) multiple input-multiple output (MIMO) scheme. SP modulation-aided DSTS transmission mechanism results in achieving high diversity gain by keeping the maximum possible Euclidean distance between the modulated symbols. Furthermore, the proposed DSTS scheme results in a low-complexity MIMO scheme, due to nonemployment of any channel estimation mechanism. Various combinations of source bit coding- (SBC-) aided IJSCD error protection scheme has been used, while considering their identical overall bit rate budget. Artificial redundancy is incorporated in the source-coded stream for the proposed SBC scheme. The motive of adding artificial redundancy is to increase the iterative decoding performance. The performance of diverse SBC schemes is investigated for identical overall code rate. SBC schemes are employed with different combinations of inner recursive systematic convolutional (RSC) codes and outer SBC codes. Furthermore, the convergence behaviour of the employed error protection schemes is investigated using extrinsic information transfer (EXIT) charts. The results of experiments show that our proposed R a t e − 2 / 3 SBC-assisted error protection scheme with high redundancy incorporation and convergence capability gives better performance. The proposed R a t e − 2 / 3 SBC gives about 1.5 dB E b / N 0 gain at the PSNR degradation point of 1 dB as compared to R a t e − 6 / 7 SBC-assisted error protection scheme, while sustaining the overall bit rate budget. Furthermore, it is also concluded that the proposed R a t e − 2 / 3 SBC-assisted scheme results in E b / N 0 gain of 24 dB at the PSNR degradation point of 1 dB with reference to R a t e − 1 SBC benchmarker scheme.

Joint Channel Estimation and Decoding for Polar Coded SCMA System Over Fading Channels

Sparse code multiple access (SCMA) and polar codes are key techniques for 5G systems. Towards to the realization of massive machine type communications (mMTC) in Internet of Things (IoT), we propose a joint channel estimation and decoding (JCD) scheme to enhance the performance of polar coded SCMA system. There are three parts in our JCD scheme. First, a sparse Bayesian learning (SBL) algorithm is proposed to measure the initial channel state information (CSI) for the JCD scheme. Then, the JCD receiver performs an iterative channel estimation and detection and decoding (ICED) scheme between the SCMA detector and the polar decoder, where the log-likelihood ratio (LLR) from SCMA detector and polar decoder can iteratively update, and the channel gain is also adjusted by the frozen bit error rate (FBER) from the polar decoder in each ICED iteration. In addition, we propose a soft successive cancellation list (soft-SCL) decoding algorithm by calculating the path metric from an LLR based logarithm method, then the soft-SCL decoder outputs the LLR information and the SCMA detector can update the symbol probability in this ICED scheme. Simulation results demonstrate the superior performance of our JCD scheme over fading channels.

Higher performance and lower complexity turbo decoding scheme for 4G-LTE using unpunctured turbo trellis-coded modulation

<p>Thanks to the success of smart phones and mobile-ready laptops, data traffic has recently grown exponentially, and the demand for mobile data has risen very dramatically. These requests in large capacity can only be satisfied by a high efficiency and a very good optimization of the infrastructures of the mobile networks, while taking into account the constraints which are the power, bandwidth and a limited complexity. The task of developing mobile technologies has also evolved from a national or regional focus to a complex and growing mission, supported by global standards development organizations such as 3GPP (3rd Group Partnership Project). Through this research, we present everything related to the simulation of the 4G mobile network system (LTE), which can provide high data flow with good quality, through three model channels known as (EPA, EVA, ETU). In this work we focus on the block ‘iterative decoding channel encoder’ in the LTE system, where the iterative channel coding called ‘Turbo-code’ (TC) is substituted by the iterative coding channel called ‘Unpunctured Turbo Trellis-coded Modulation’ (UTTCM). The simulation results showed that with less decoding complexities, UTTCM's LTE system gives good performance (in terms of BER).</p>

Efficient Method for Three Loop MMSE-SIC based Iterative MIMO Systems

Iterative decoding is one of the promising methods to improve the performance of MIMO systems. In iterative processing channel decoder and MIMO detector share the information in order to enhance the overall system performance. However, iterative processing requires a lot of computations therefore it is considered as a computationally complex approach due to complex detection schemes involving iterative processing. There are several promising detection methods that require further improvements and they can be candidates in order to practically implement iterative processing. In this paper, the propose method to improve the efficiency of three loop-based minimum mean squared errors with soft interference cancellation (MMSE-SIC) method by reducing its complexity with a single inverse operation. Simulation results are given in order to provide detail analysis of the proposed MMSE-SIC based approach for iterative detection and decoding (IDD).

Channel estimation via gradient pursuit for mmWave massive MIMO systems with one-bit ADCs

In millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems, 1 bit analog-to-digital converters (ADCs) are employed to reduce the impractically high power consumption, which is incurred by the wide bandwidth and large arrays. In practice, the mmWave band consists of a small number of paths, thereby rendering sparse virtual channels. Then, the resulting maximum a posteriori (MAP) channel estimation problem is a sparsity-constrained optimization problem, which is NP-hard to solve. In this paper, iterative approximate MAP channel estimators for mmWave massive MIMO systems with 1 bit ADCs are proposed, which are based on the gradient support pursuit (GraSP) and gradient hard thresholding pursuit (GraHTP) algorithms. The GraSP and GraHTP algorithms iteratively pursue the gradient of the objective function to approximately optimize convex objective functions with sparsity constraints, which are the generalizations of the compressive sampling matching pursuit (CoSaMP) and hard thresholding pursuit (HTP) algorithms, respectively, in compressive sensing (CS). However, the performance of the GraSP and GraHTP algorithms is not guaranteed when the objective function is ill-conditioned, which may be incurred by the highly coherent sensing matrix. In this paper, the band maximum selecting (BMS) hard thresholding technique is proposed to modify the GraSP and GraHTP algorithms, namely, the BMSGraSP and BMSGraHTP algorithms, respectively. The BMSGraSP and BMSGraHTP algorithms pursue the gradient of the objective function based on the band maximum criterion instead of the naive hard thresholding. In addition, a fast Fourier transform-based (FFT-based) fast implementation is developed to reduce the complexity. The BMSGraSP and BMSGraHTP algorithms are shown to be both accurate and efficient, whose performance is verified through extensive simulations.

Massive-MIMO Iterative Channel Estimation and Decoding (MICED) in the Uplink

Massive MIMO uses a large number of antennas to increase the spectral efficiency (SE) through spatial multiplexing of users, which requires accurate channel state information. It is often assumed that regular pilots (RP), where a fraction of the time-frequency resources is reserved for pilots, suffices to provide high SE. However, the SE is limited by the pilot overhead and pilot contamination. An alternative is superimposed pilots (SP) where all resources are used for pilots and data. This removes the pilot overhead and reduces pilot contamination by using longer pilots. However, SP suffers from data interference that reduces the SE gains. This paper proposes the Massive-MIMO Iterative Channel Estimation and Decoding (MICED) algorithm where partially decoded data is used as side-information to improve the channel estimation and increase SE. We show that users with precise data estimates can help users with poor data estimates to decode. Numerical results with QPSK modulation and LDPC codes show that the MICED algorithm increases the SE and reduces the block-error-rate with RP and SP compared to conventional methods. The MICED algorithm with SP delivers the highest SE and it is especially effective in scenarios with short coherence blocks like high mobility or high frequencies.

Joint Iterative Channel Estimation and Frequency-Domain Turbo Equalization for Single-Carrier Spatial Modulation

Single-carrier frequency-domain turbo equalization (SC-FDTE) has gained widespread adoption in the emerging broadband spatial modulation (SM) systems operating in frequency-selective channels, where the channel model considered is a quasi-static Rayleigh fading channel. In this paper, a new class of robust FDTE designs based on the minimum mean-square error (MMSE) criterion is conceived for broadband single-carrier SM (SC-SM) systems relying on realistic imperfect channel knowledge. First, a robust time-domain soft-decision feedback (TDSDF)-aided FDTE is proposed to cope with channel estimation errors at the receiver. Furthermore, its robust frequency-domain soft-decision feedback (FDSDF)-aided counterpart is derived to offer a low-complexity approximate solution. Finally, by exploiting the carefully selected reliable soft-decision output of the channel decoder as pilots, we refine the resultant decision-directed channel estimation. As a benefit, the performance of the two robust FDTEs can be further improved. Both our simulation results and our extrinsic information transfer (EXIT) chart analysis demonstrate that the proposed robust FDTEs achieve significant performance improvements over the conventional FDTEs.

Soft Decision Control Iterative Channel Estimation for the Internet of Things in 5G Networks

In the fifth generation mobile networks, generalized frequency division multiplexing (GFDM) is expected as the candidate waveform which can flexibly meet the requirements of diverse applications and scenarios for the Internet of Things (IoT) because of its advantages over orthogonal frequency division multiplexing (OFDM). In order to achieve the reliable data transmission in GFDM-based IoT systems, channel estimation (CE) is a prerequisite. However, the 2-D block modulation and the nonorthogonality between subcarriers for GFDM make it almost impossible that the conventional CE methods suitable for OFDM are directly applied to GFDM. To cope with this problem, a soft decision control strategy-based iterative CE (SDC-ICE) method is proposed in this paper. First, the received signal is equalized by the channel frequency response (CFR) from the pilot-based CE. After GFDM demodulation and Turbo decoding, the feedback log-likelihood ratio is utilized to rebuild symbols for data-aided CE by a redesigned Turbo receiver. Subsequently, the feedback information of both current and former iterations is used to improve the reliability of rebuilt symbols. The CFR obtained from SDC-ICE is used for equalization in the next iteration. The performance of SDC-ICE can be improved by increasing the iterations. Finally, the bit error rate (BER) and mean square error (MSE) performances of SDC-ICE and hard decision control strategy-based iterative CE (HDC-ICE) are simulated and evaluated. Simulation results demonstrate that the proposed method has better BER and MSE performance than HDC-ICE within fewer iterations.

Iterative channel estimation and pilot design rules for high‐mobility comb‐pilot OFDM system

SummaryWith wireless communications in high‐mobility environment becoming popular, this poses a big challenge for communication systems based on the comb‐pilot OFDM, such as IEEE 802.11p, since it has not the enough pilots to estimate the time‐ and frequency‐selective channel accurately. In this paper, several comb‐pilot schemes and three comb‐pilot design rules are proposed to meet the Nyquist criterion for sampling the vehicle‐to‐vehicle (V2V) channel and the requirements of second‐order statistic of V2V channel. Based on the proposed pilot schemes, an iterative channel estimation method from the CE‐BEM model is proposed, together with three ICI cancellation methods. After thorough simulation, the effectiveness of the comb‐pilot design rules, the proposed channel estimation method, and intercarrier interference (ICI) cancellation methods is verified. Compared with other channel estimation methods, the proposed method performs better. The simulation results also reveal that the channel order L+1 has a great impact on the performance of the comb‐pilot OFDM system.

Cost Function based Soft Feedback Iterative Channel Estimation in OFDM Underwater Acoustic Communication

Underwater Acoustic (UWA) communication is mainly characterized by bandwidth limited complex UWA channels. Orthogonal Frequency Division Multiplexing (OFDM) solves the bandwidth problem and an efficient channel estimation scheme estimates the channel parameters. Iterative channel estimation refines the channel estimation by reducing the number of pilots and coupling the channel estimator with channel decoder. This paper proposes an iterative receiver for OFDM UWA communication, based on a novel cost function threshold driven soft decision feedback iterative channel technique. The receiver exploits orthogonal matching pursuit (OMP) channel estimation and low density parity check (LDPC) coding techniques after comparing different channel estimation and coding schemes. The performance of the proposed receiver is verified by simulations as well as sea experiments. Furthermore, the proposed iterative receiver is compared with other non-iterative and soft decision feedback iterative receivers.

Iterative Channel Estimation Using LSE and Sparse Message Passing for MmWave MIMO Systems

We propose an iterative channel estimation algorithm based on the Least Square Estimation (LSE) and Sparse Message Passing (SMP) algorithm for the Millimeter Wave (mmWave) MIMO systems. The channel coefficients of the mmWave MIMO are approximately modeled as a Bernoulli-Gaussian distribution and the channel matrix is sparse with only a few non-zero entries. By leveraging the advantage of sparseness, we propose an algorithm that iteratively detects the exact locations and values of non-zero entries of the sparse channel matrix. At each iteration, the locations are detected by the SMP, and values are estimated with the LSE. We also analyze the Cram\'er-Rao Lower Bound (CLRB), and show that the proposed algorithm is a minimum variance unbiased estimator under the assumption that we have the partial priori knowledge of the channel. Furthermore, we employ the Gaussian approximation for message densities under density evolution to simplify the analysis of the algorithm, which provides a simple method to predict the performance of the proposed algorithm. Numerical experiments show that the proposed algorithm has much better performance than the existing sparse estimators, especially when the channel is sparse. In addition, our proposed algorithm converges to the CRLB of the genie-aided estimation of sparse channels with only five turbo iterations.

Real-Valued Orthogonal Sequences for Iterative Channel Estimation in MIMO-FBMC Systems

In this paper, we present a novel sequence design for efficient channel estimation in multiple input multiple output filterbank multicarrier (MIMO-FBMC) system with offset QAM modulation. Our proposed sequences, transmitted over one FBMC/OQAM symbol, are real-valued in the frequency domain and display zero-correlation zone properties in the time-domain. The latter property enables optimal channel estimation for a least-square estimator in frequency-selective fading channels. To further improve the system performance, we mitigate the data interference by an iterative feedback loop between channel estimation and FBMC demodulation. Simulation results validate that our proposed real-valued orthogonal sequences and the iterative channel estimation and demodulation scheme provide a practical solution for enhanced performance in preamble-based MIMO-FBMC systems.

Approximate Message Passing-Aided Iterative Channel Estimation and Data Detection of OFDM-IM in Doubly Selective Channels

The channel estimation and data detection of orthogonal frequency-division multiplexing with index modulation in doubly selective channels is a challenging problem due to the large number of channel parameters and the severe inter-carrier interference. In this paper, an iterative channel estimation and data detection scheme is proposed with the aid of the recent compressed sensing algorithm of approximate message passing (AMP). The time-varying channel is first approximated by basis expansion model (BEM) to reduce the number of channel parameters to be estimated, and AMP is utilized to estimate the BEM coefficients based on the pilot signals and soft information of data from the decoder. The channel is then reconstructed from the estimated BEM coefficients, and AMP is also employed to recover the transmit data based on the estimated channel and soft information of data from the decoder. The soft information of AMP detector is further sent to the decoder, which feeds soft information to both AMP estimator and AMP detector. To address the undesired measurement matrix in both channel estimation and data detection, two variants of AMP, i.e., damped AMP and vector AMP (VAMP), are utilized as practical estimator and/or detector here. Moreover, in both damped AMP/VAMP estimator and detector, the efficient utilization of soft data information is presented. Finally, simulation results are given to verify the performance of the proposed receiver.