Iterative Block Decision Feedback Equalization Research Articles

Iterative Block Decision Feedback Equalization for the Hybrid Carrier System

Iterative Block Decision Feedback Equalization for the Hybrid Carrier System

Low complexity nonlinear detection for multiuser hybrid MIMO systems and performance analysis

This paper proposes an analytical framework and a system of distortion-aware receiver structures for single-carrier uplink hybrid beamforming-based multiple-input-multiple-output (MIMO) channels. Proposed single-user processing units cooperate at the base station (BS) in an iterative manner for multi-user symbol detection under hardware impairments. Firstly, in the proposed system, an iterative nonlinear interference cancellation (nIC) based on feedforward neural network (NN) modeling is developed to eliminate the nonlinear distortion effects of power amplifiers (PAs). Furthermore, depending on the fading pattern of the instantaneous channel, it is analytically shown that a large gain may be applied to the distortion signal during the equalization stage, which yields distortion amplification causing a significant decrease in the signal-to-distortion-plus-noise ratio (SDNR). A reduced complexity distortion aware detector, based on a bank of fractionally delayed iterative block decision feedback equalization (IB-DFE) receivers, is introduced to adjust the combiner weights for fractionally delayed IB-DFE outputs so that distortion power is minimized before detection. Consequently, multi-user detection capability is enhanced considerably. Secondly, an asymptotic SDNR analysis is performed. The theoretical analysis, verified via numerical evaluations, clearly shows that distortion amplification limits the achievable SDNR at the BS, and the proposed reduced complexity multi-user receiver architecture improves the BER performance by effectively mitigating this effect.

An Estimated δ-Based Iterative Block Decision Feedback Equalization in SC-FDE System

We provide a novel nonlinear frequency domain equalization algorithm for the frequency domain equalization of an SC-FDE system by improving the classical iterative block decision feedback equalization (IBDFE) algorithm and applying δ estimation to the improved algorithm. The improvement of the IBDFE algorithm is carried out by replacing the ZF equalization in the feedback branch with the MMSE equalization and eliminating the iteration of the correlation factor, thus reducing the noise error and the computational complexity of the original algorithm. δ estimation can estimate residual inter-symbol interference in the signal after MMSE equalization and reject it, thus further improving the equalization accuracy. The simulation results show that the performance of the novel algorithm is better than that of the IBDFE algorithm with similar complexity, or the complexity of the novel algorithm is lower than that of the IBDFE algorithm with similar performance.

On the Performance of LDPC-Coded MIMO Schemes for Underwater Communications Using 5G-like Processing

This article studies the underwater acoustic (UWA) communications associated with multiple input–multiple output (MIMO), single carrier with frequency-domain equalization (SC-FDE), and with low-density parity-check (LDPC) codes. Low-complexity receivers such as equal gain combining (EGC), maximum ratio combining (MRC), and iterative block—decision feedback equalization (IB-DFE) are studied in the above-described scenarios. Furthermore, due to the low carrier frequencies utilized in UWA communications, the performance of the proposed MIMO scenarios is studied at different levels of channel correlation between antennas. This article shows that the combined schemes tend to achieve good performances while presenting low complexity, even in scenarios with channel correlation between antennas.

Detection of Signals in MC–CDMA Using a Novel Iterative Block Decision Feedback Equalizer

This paper presents a technique to mitigate multiple access interference (MAI) in multicarrier code division multiple access (MC-CDMA) wireless communications systems. Although under normal circumstances the MC-CDMA system can achieve high spectral efficiency and resistance towards inter symbol interference (ISI) however when exposed to substantial nonlinear distortion the issue of MAI manifests. Such distortion results when the power amplifiers are driven into saturation or when the transmit signal experiences extreme adverse channel conditions. The proposed technique uses a modified iterative block decision feedback equalizer (IB-DFE) that uses a minimal mean square error (MMSE) receiver in the feed-forward path to nullify the residual interference from the IB-DFE receiver. The received signal is re-filtered in an iterative process to significantly improve the MC-CDMA system’s performance. The effectiveness of the proposed modified IB-DFE technique in MC-CDMA systems has been analysed under various harsh nonlinear conditions, and the results of this analysis presented here confirm the effectiveness of the proposed technique to outperform conventional methodologies in terms of the bit error rate (BER) and lesser computational complexity.

Increasing Reliability on UAV Fading Scenarios

Unmanned aerial vehicles (UAVs) are the next technology to be incorporated into a telecommunications network to improve command and control on a large scale in both line-of-sight (LOS) and non-line-of-sight (NLOS) conditions. However, there is still room for improvement in terms of reliability. This paper investigates Constant Packet Combining (CPC) and Adaptive Packet Combining (APC) techniques applied to Unmanned Aerial Vehicle (UAV) communication in the presence of large-scale fading, where the channels are subject to sudden degradation for long periods due to obstructions. We use Single Carrier (SC) Frequency Domain Equalization (FDE) combined with the Iterative Block Decision-Feedback Equalizer (IB-DFE) to handle command and control messages mapped for UAV use cases. We present closed-form equations for the equalization design as well as the performance parameters such as Bit Error Rate (BER), the Packet Error Rate (PER), the throughput, the retransmissions amount, the goodput (the transmission rate without the retransmissions quantity), and the outage probability. Then, we analyze the system performance using correlated, independent, and equal channels. There is a trade-off between the overall available power, throughput, and reliability. For instance, more retransmissions result in higher reliability, power consumption and lower goodputs (effective data rates). CPC validates the transmission system and confirms the improvement of BER and PER parameters without energy efficiency optimization. APC is appealing because it can reduce the number of retransmissions for all channels used with the advantage of meeting energy efficiency requirements by adapting the overall power to the scenario experienced by the UAV.

Energy Efficient Secure Communication Model against Cooperative Eavesdropper

In a wiretap channel system model, the jammer node adopts the energy-harvesting signal as artificial noise (jamming signal) against the cooperative eavesdroppers. There are two eavesdroppers in the wiretap channel: eavesdropper E1 is located near the transmitter and eavesdropper E2 is located near the jammer. The eavesdroppers are equipped with multiple antennas and employ the iterative block decision feedback equalization decoder to estimate the received signal, i.e., information signal at E1 and jamming signal at E2. It is assumed that E1 has the channel state information (CSI) of the channel between transmitter and E1, and similarly, E2 has the CSI of channel between jammer and E2. The eavesdroppers establish communication link between them and cooperate with each other to reduce the information signal interference at E2 and jamming signal interference at E1. The performance of decoders depends on the signal to interference plus noise ratio (SINR) of the received signal. The power of information signal is fixed and the power of the jamming signal is adjusted to improve the SINR of the received signal. This research work is solely focused on optimizing the jamming signal power to degrade the performance of cooperative eavesdroppers. The jamming signal power is optimized for the given operating SINR with the support of simulated results. The jamming signal power optimization leads to better energy conservation and degrades the performance of eavesdroppers.

An Efficient Interference-Aware Constrained Massive MIMO Beamforming for mm-Wave JSDM

Low-complexity beamformer design with practical constraints is an attractive research area for hybrid analog/digital systems in mm-wave massive multiple-input multiple-output (MIMO). This paper investigates interference-aware pre-beamformer (analog beamformer) design for joint spatial division and multiplexing (JSDM) which is a user-grouping based two-stage beamforming method. Single-carrier frequency domain equalization (SC-FDE) is employed in uplink frequency-selective channels. First, unconstrained slowly changing statistical analog beamformer of each group, namely, generalized eigenbeamformer (GEB) which has strong interference suppression capability is designed by maximizing the mutual information in reduced dimension. Then, constant-modulus constrained approximations of unconstrained beamformer are obtained by utilizing alternating minimization algorithms for fully connected arrays and fixed subarrays. In addition, a dynamic subarray algorithm is proposed where the connections between radio frequency (RF) chains and antennas are changed with changing channel statistics. Convergence of the proposed alternating minimization-based algorithms is provided along with their complexity analysis. It is observed that the additional complexity of proposed algorithms is insignificant for the overall system design. Although most of the interference is suppressed with the help of proposed constrained beamformers, there may be some residual interference after analog beamforming stage. Thus, minimum mean square error (MMSE) criterion based iterative block decision feedback equalization (IB-DFE) method, which takes the residual interference in reduced dimension into account, is promoted for digital beamforming stage. Simulation results verify the superiority of the proposed interference-aware constrained design over existing approaches in terms of beampattern, spectral efficiency, outage capacity, bit-error rate (BER), and channel estimation accuracy.

Estimating the Performance of MIMO SC-FDE Systems Using SISO Measurements

The demand for ubiquitous telecommunications services forces operators to have a special concern about signal quality and the coverage area they offer to their customers. This was usually checked by using suitable propagation models for Single Input Single Output (SISO) systems, which are no longer the case for new and future mobile generations, such as 5G and beyond. To guarantee good signal quality coverage, operators started to replace these models with Multiple Input Multiple Output (MIMO) ones. To achieve the best results, these models are usually calibrated with Drive Test (DT) measures; however, the DTs available for MIMO propagation models are sparse, in contrast to SISO ones. The main contribution presented in this paper is a methodology to extend the propagation models of SISO systems so they can be applied in MIMO sytems with Single-Carrier and Frequency-Domain Equalization (SC-FDE), while still using DTs acquired for SISO systems. This paper presents the impact on Bit Error Rate (BER) performance and its coverage area resulting from the application of our proposed method. We consider a MIMO SC-FDE system with an Iterative Block Decision Feedback Equalization (IB-DFE) receiver and we present the improvement expressions for the BER that we illustrate with some simulations.

Signal Detection in Multi Carrier–Code Division Multiple Access System using Iterative Block Decision Feedback Equalizer

Signal Detection in Multi Carrier–Code Division Multiple Access System using Iterative Block Decision Feedback Equalizer

Secure Information Transmission with Self Jamming SWIPT

This article is focused on implementing simultaneous wireless information and power transmission as a physical layer security measure by using artificial noise. A series of high energy precoded symbols is simultaneously transmitted along with the information symbols over a Rayleigh frequency selective fading channel. The high energy precoded symbols act as an artificial noise for the eavesdroppers. The energy symbols are precoded on the basis of a legitimate user’s channel matrix to form a null space vector, which eliminates the interference of energy symbols at the information symbol receiver antennas, while allowing the rectenna to harvest energy from the superimposed information and energy symbols. We analyze the secrecy rate and error rate performance at the receiver under different circumstances, and we show that the performance of the legitimate user can be improved by using the iterative block decision feedback equalization method at the receiver.

Analytical Performance Evaluation of Massive MIMO Techniques for SC-FDE Modulations

In the Fifth Generation of telecommunications networks (5G), it is possible to use massive Multiple Input Multiple Output (MIMO) systems, which require efficient receivers capable of reaching good performance values. MIMO systems can also be extended to massive MIMO (mMIMO) systems, while maintaining their, sometimes exceptional, performance. However, we must be aware that this implies an increase in the receiver complexity. Therefore, the use of mMIMO in 5G and future generations of mobile receivers will only be feasible if they use very efficient algorithms, so as to maintain their excellent performance, while coping with increasing and critical user demands. Having this in mind, this paper presents and compares three types of receivers used in MIMO systems, for further use with mMIMO systems, which use Single-Carrier with Frequency-Domain Equalization (SC-FDE), Iterative Block Decision Feedback Equalization (IB-DFE) and Maximum Ratio Combining (MRC) techniques. This paper presents and compares the theoretical and simulated performance values for these receivers in terms of their Bit Error Rate (BER) and correlation factor. While one of the receivers studied in this paper achieves a BER performance nearly matching the Matched Filter Bound (MFB), the other receivers (IB-DFE and MRC) are more than 1 dB away from MFB. The results obtained in this paper can help the development of ongoing research involving hybrid analog/digital receivers for 5G and future generations of mobile communications.

Efficient Joint Channel Equalization and Tracking for V2X Communications Using SC-FDE Schemes

Our aim with this paper is to present a solution suitable for vehicle-to-everything (V2X) communications, particularly, when employing single-carrier modulations combined with frequency-domain equalization (SC-FDE). In fact, we consider the V2X channel to be doubly-selective, where the variation of the channel in time is due to the presence of a Doppler term. Accordingly, the equalization procedure is dealt by a low-complexity iterative frequency-domain equalizer based on the iterative block decision-feedback equalization (IB-DFE) while the tracking procedure is conducted employing an extended Kalman filter (EKF). The proposed system is very efficient since it allows a very low density of training symbols, even for fast-varying channels. Furthermore only two training symbols are required to initialize the tracking procedure. Thus, ensuring low latency together with reduced channel estimation overheads.

Multiuser Equalizer for Hybrid Massive MIMO mmWave CE-OFDM Systems

This paper considers a multiuser broadband uplink massive multiple input multiple output (MIMO) millimeter-wave (mmWave) system. The constant envelope orthogonal frequency division multiplexing (CE-OFDM) is adopted as a modulation technique to allow an efficient power amplification, fundamental for mmWave based systems. Furthermore, a hybrid architecture is considered at the user terminals (UTs) and base station (BS) to reduce the high cost and power consumption required by a full-digital architecture, which has a radio frequency (RF) chain per antenna. Both the design of the UT’s precoder and base station equalizer are considered in this work. With the aim of maximizing the beamforming gain between each UT and the BS, the precoder analog coefficients are computed as a function of the average angles of departure (AoD), which are assumed to be known at the UTs. At the BS, the analog part is derived by assuming a system with no multi-user interference. Then, a per carrier basis nonlinear/iterative multi-user equalizer, based on the iterative block decision feedback equalization (IB-DFE) principle is designed, to explicitly remove both the multi-user and residual inter carrier interferences, not tackled in the analog part. The equalizer design metric is the sum of the mean square error (MSE) of all subcarriers, whose minimization is shown to be equivalent to the minimization of a weighted error between the hybrid and the full digital equalizer matrices. The results show that the proposed hybrid multi-user equalizer has a performance close to the fully digital counterpart.

Iterative Block Decision Feedback Equalization for IM/DD-Based OCDM to Compensate Chromatic-Dispersion-Induced Power Fading

Orthogonal chirp-division multiplexing (OCDM) has recently been proposed as an attractive modulation technique for high-speed fiber-optic systems in virtue of its resilience against system impairments. In this paper, we propose an iterative block (IB) decision feedback equalization (DFE) algorithm for the intensity-modulation and direct-detection (IM/DD) based OCDM system to effectively mitigate the chromatic-dispersion (CD) induced power fading in the fiber. An efficient algorithm is derived to simplify the IB-DFE at the receiver. Analysis is provided to show that the fading effect is compensated by recovering the noisy signals in the vicinity of frequency notches. Simulations were carried out to study the performance of the proposed system. The results show that the proposed system with IB-DFE is able to compensate severe fading effects and improves the bit error rate (BER) by several orders of magnitude. An experiment was implemented to realize 30.3-Gb/s IM/DD-OCDM signal over 50-km fiber, in which power fading due to CD over 20 dB was observed. The experiment results show that the proposed system further reduced the required optical signal-to-noise ratio by 8 dB to achieve a BER of 3 × 10−5.

Analysis of the Impact of the Receiver I/Q Imbalance on the Achievable Rate of SC-FDE Systems

This paper analyzes the achievable rate of the single-carrier system with a frequency-domain equalizer (SC-FDE) under the receiver in-phase/quadrature phase (I/Q) imbalance in the radio frequency front-end. We consider linear schemes based on the minimum mean square error (MMSE), zero-forcing equalization, and a matched filter. We derive the achievable rate of the SC-FDE system hit by the I/Q imbalance for the mentioned scenarios. We show that depending on the value of I/Q imbalance parameters, the achievable rate of the system approaches a saturation level. To examine the validity of our analysis, we compare it with the simulation results and exhibit their consistency. We also consider nonlinear schemes such as an iterative block decision feedback equalizer (IB-DFE), which is an iterative scheme. We obtain the mutual information achieved by the IB-DFE in the high-signal-to-noise-ratio regime and after enough number of iterations.

Reduced Complexity Detection in MIMO Systems with SC-FDE Modulations and Iterative DFE Receivers

This paper considers a Multiple-Input Multiple-Output (MIMO) system with P transmitting and R receiving antennas and different overall noise characteristics on the different receiver antennas (e.g., due to nonlinear effects at the receiver side). Each communication link employs a Single-Carrier with Frequency-Domain Equalization (SC-FDE) modulation scheme, and the receiver is based on robust iterative frequency-domain multi-user detectors based on the Iterative Block Decision Feedback Equalization (IB-DFE) concept. We present low complexity efficient receivers that can employ low resolution Analog-to-Digital Converters (ADCs) and require the inversion of matrices with reduced dimension when the number of receive antennas is larger than the number of independent data streams. The advantages of the proposed techniques are particularly high for highly unbalanced MIMO systems, such as in the uplink of Base Station (BS) cooperation systems that aim for Single-Frequency Network (SFN) operation or massive MIMO systems with much more antennas at the receiver side.

Two Low Complexity MRC and EGC Based Receivers for SC-FDE Modulations with Massive MIMO Schemes

Massive multiple-input and multiple-output (MIMO) schemes involving several tens or even hundreds of antenna elements are pointed as one of the key technologies for 5G systems. However the huge capacity gains attainable by these schemes, are only possible with receivers able to cope with the frequency selective fading that may affect the signals. These systems can be combined with single-carrier with frequency domain equalization (SC-FDE) schemes to improve the power efficiency in uplink due to the low envelope fluctuations. However, when more antennas are involved in the communication link, channel matrix size grows and the complexity involved in equalization process can be an obstacle to power consumption and low latency. In this paper we will focus on the equalization applied in massive MIMO schemes, more specifically in two new low complexity receivers based on an iterative block decision feedback equalizer (IB-DFE) that avoid matrix inversion operation by replacing in the equalizer the feedforward part by an equal gain combiner (EGC) or a maximum ratio combiner (MRC) module.

Spatial CCK Modulation and Iterative Detection Over Frequency-Selective Fading Channels

In this letter, we present a novel spatial modulation (SM) transmission with multiple antennas by applying non-orthogonal complementary code keying (CCK). We propose a high-performance turbo receiver for this CCK-SM signaling over frequency-selective fading channels. Compared with conventional SM, our proposed CCK-SM transceiver utilizes the advantages of CCK to achieve substantial coding gain without the cost of high complexity. Our novel receiver incorporates iterative block decision feedback equalization with a CCK soft decoder to achieve clear performance gain. Simulation test shows substantial performance gain by the proposed CCK-SM transceiver over the conventional SM.

Analytical BER Performance Evaluation in SISO and MIMO Environments with SC-FDE Modulations and IB-DFE Receivers

This paper presents the analysis of the obtainment of the theoretical bit error rate (BER) performance in single-input–single-output and multiple-input–multiple-output systems with single-carrier with frequency-domain equalization modulations and iterative receivers based on the iterative block decision feedback equalization concept. Through the consideration of a Gaussian-based approach to obtain the BER performance, we present a simple and accurate model to improve such method by compensating the difference between the theoretical performance results and the ones obtained by simulation.