Isotope-labeled Protein Research Articles

Minimization of dynamic effects in the evolution of dihydrofolate reductase.

Protein isotope labeling is a powerful technique to probe functionally important motions in enzyme catalysis and can be applied to investigate the conformational dynamics of proteins. Previous investigations have indicated that dynamic coupling is detrimental to catalysis by dihydrofolate reductase (DHFR) from the mesophile Escherichia coli (EcDHFR). Comparison of DHFRs from organisms adapted to survive at a wide range of temperatures suggests that dynamic coupling in DHFR catalysis has been minimized during evolution; it arises from reorganizational motions needed to facilitate charge transfer events. Contrary to the behaviour observed for the DHFR from the moderate thermophile Geobacillus stearothermophilus (BsDHFR), the chemical transformation catalyzed by the cold-adapted bacterium Moritella profunda (MpDHFR) is only weakly affected by protein isotope substitutions at low temperatures, but the isotopically substituted enzyme is a substantially inferior catalyst at higher, non-physiological temperatures. QM/MM studies revealed that this behaviour is caused by the enzyme's structural sensitivity to temperature changes, which enhances unfavorable dynamic coupling at higher temperatures by promoting additional recrossing trajectories on the transition state dividing surface. We postulate that these motions are minimized by fine-tuning DHFR flexibility through optimization of the free energy surface of the reaction, such that a nearly static reaction-ready configuration with optimal electrostatic properties is maintained under physiological conditions.

NMR of Membrane Proteins: Beyond Crystals.

Membrane proteins are essential for the flow of signals, nutrients and energy between cells and between compartments of the cell. Their mechanisms can only be fully understood once the precise structures, dynamics and interactions involved are defined at atomic resolution. Through advances in solution and solid state NMR spectroscopy, this information is now available, as demonstrated by recent studies of stable peripheral and transmembrane proteins. Here we highlight recent cases of G-protein coupled receptors, outer membrane proteins, such as VDAC, phosphoinositide sensors, such as the FAPP-1 pleckstrin homology domain, and enzymes including the metalloproteinase MMP-12. The studies highlighted have resulted in the determination of the 3D structures, dynamical properties and interaction surfaces for membrane-associated proteins using advanced isotope labelling strategies, solubilisation systems and NMR experiments designed for very high field magnets. Solid state NMR offers further insights into the structure and multimeric assembly of membrane proteins in lipid bilayers, as well as into interactions with ligands and targets. Remaining challenges for wider application of NMR to membrane structural biology include the need for overexpression and purification systems for the production of isotope-labelled proteins with fragile folds, and the availability of only a few expensive perdeuterated detergents.Step changes that may transform the field include polymers, such as styrene maleic acid, which obviate the need for detergent altogether, and allow direct high yield purification from cells or membranes. Broader demand for NMR may be facilitated by MODA software, which instantly predicts membrane interactive residues that can subsequently be validated by NMR. In addition, recent developments in dynamic nuclear polarization NMR instrumentation offer a remarkable sensitivity enhancement from low molarity samples and cell surfaces. These advances illustrate the current capabilities and future potential of NMR for membrane protein structural biology and ligand discovery.

The Isotope‐Coded Affinity Tag Method for Quantitative Protein Profile Comparison and Relative Quantitation of Cysteine Redox Modifications

The isotope-coded affinity tag (ICAT) technique has been applied to measure pairwise changes in protein expression through differential stable isotopic labeling of proteins or peptides followed by identification and quantification using a mass spectrometer. Changes in protein expression are observed when the identical peptide from each of two biological conditions is identified and a difference is detected in the measurements comparing the peptide labeled with the heavy isotope to the one with a normal isotopic distribution. This approach allows the simultaneous comparison of the expression of many proteins between two different biological states (e.g., yeast grown on galactose versus glucose, or normal versus cancer cells). Due to the cysteine-specificity of the ICAT reagents, the ICAT technique has also been applied to perform relative quantitation of cysteine redox modifications such as oxidation and nitrosylation. This unit describes both protein quantitation and profiling of cysteine redox modifications using the ICAT technique.

Exploiting hydrophobicity for efficient production of transmembrane helices for structure determination by NMR spectroscopy.

Despite the biological and pharmaceutical significance of membrane proteins, their tertiary structures constitute less than 3% of known structures. One of the major obstacles for initiating structural studies of membrane proteins by NMR spectroscopy is the generation of high amounts of isotope-labeled protein. In this work, we have exploited the hydrophobic nature of membrane proteins to develop a simple and efficient production scheme for isotope-labeled single-pass transmembrane domains (TMDs) with or without intrinsically disordered regions. We have evaluated the applicability and limitations of the strategy using seven membrane protein variants that differ in their overall hydrophobicity and length and show a recovery for suitable variants of >70%. The developed production scheme is cost-efficient and easy to implement and has the potential to facilitate an increase in the number of structures of single-pass TMDs, which are difficult to solve by other means.

Backbone resonance assignment of N15, N30 and D10 T cell receptor β subunits.

The αβT Cell receptor (TCR) governs T cell immunity through its interaction with peptide bound to major histocompatibility complex molecules (pMHC). Previously, soluble ectodomain constructs have been used to elucidate the binding mode of the TCR for the MHC. However, the full heterodimeric αβTCR has proven difficult to produce reproducibly in recombinant systems to the extent seen in the routine production of novel antibodies. Particularly, the route of production in E. coli, which is most convenient for isotopic labeling of proteins, is challenging for a wide range of αβTCR, including N15αβ, N30αβ, but not D10αβ. With the aim of understanding the TCR-pMHC interaction through the use of dynamic binding measurements, we set out to produce TCRβ subunits with which we could investigate binding with pMHC. The TCRβ constructs are more readily produced and refolded than their αβ counterparts and have proven to be an effective model of preTCR in pMHC binding studies. As a first step towards characterizing potential interactions with protein ligands, we have assigned the backbone resonances of three TCRβ subunits, N15β, N30β and D10β.

Synthesis of Metabolic Amino acid Precursors: Tools for Selective Isotope Labeling in Cell-Based Protein Overexpression

The rapid development of biomolecular NMR spectroscopy in the last decade(s) has paved the way for novel insights into the structure, dynamic properties, as well as the interaction of proteins. However, NMR data interpretation of large protein complexes is only feasible if the corresponding sample is selectively enriched in NMR active nuclei ( 13 C and 15 N) and/or 1 H-depleted by 2 H incorporation. One important strategy for selective protein isotope labeling is given by the addition of metabolic amino acid precursor compounds to the growth medium of a protein-overexpressing microorganism. Herein, we highlight the synthetic concepts to access these precursors from commercially available isotope sources. 1 Introduction 2 Aliphatic Residue Precursors 3 Aromatic Residue Precursors 4 Precursors of Other Labeled Residues 5 Conclusions

A facile method for expression and purification of 15N isotope-labeled human Alzheimer’s β-amyloid peptides from E. coli for NMR-based structural analysis

Alzheimer’s disease (AD) is a progressive neurodegenerative disease affecting millions of people worldwide. AD is characterized by the presence of extracellular plaques composed of aggregated/oligomerized β-amyloid peptides with Aβ42 peptide representing a major isoform in the senile plaques. Given the pathological significance of Aβ42 in the progression of AD, there is considerable interest in understanding the structural ensembles for soluble monomer and oligomeric forms of Aβ42. This report describes an efficient method to express and purify high quality 15N isotope-labeled Aβ42 for structural studies by NMR. The protocol involves utilization of an auto induction system with 15N isotope labeled medium, for high-level expression of Aβ42 as a fusion with IFABP. After the over-expression of the 15N isotope-labeled IFABP-Aβ42 fusion protein in the inclusion bodies, pure 15N isotope-labeled Aβ42 peptide is obtained following a purification method that is streamlined and improved from the method originally developed for the isolation of unlabeled Aβ42 peptide (Garai et al., 2009). We obtain a final yield of ∼6mg/L culture for 15N isotope-labeled Aβ42 peptide. Mass spectrometry and 1H–15N HSQC spectra of monomeric Aβ42 peptide validate the uniform incorporation of the isotopic label. The method described here is equally applicable for the uniform isotope labeling with 15N and 13C in Aβ42 peptide as well as its other variants including any Aβ42 peptide mutants.

Auto-inducing media for uniform isotope labeling of proteins with (15)N, (13)C and (2)H.

Auto-inducing media for protein expression offer many advantages like robust reproducibility, high yields of soluble protein and much reduced workload. Here, an auto-inducing medium for uniform isotope labelling of proteins with (15)N, (13)C and/or (2)H in E. coli is presented. So far, auto-inducing media have not found widespread application in the NMR field, because of the prohibitively high cost of labeled lactose, which is an essential ingredient of such media. Here, we propose using lactose that is only selectively labeled on the glucose moiety. It can be synthesized from inexpensive and readily available substrates: labeled glucose and unlabeled activated galactose. With this approach, uniformly isotope labeled proteins were expressed in unattended auto-inducing cultures with incorporation of (13)C, (15)N of 96.6% and (2)H, (15)N of 98.8%. With the present protocol, the NMR community could profit from the many advantages that auto-inducing media offer.

Escherichia coli auxotroph host strains for amino acid-selective isotope labeling of recombinant proteins.

Enrichment of proteins with isotopes such as (2)H, (15)N, and (13)C is commonly carried out in magnetic resonance and vibrational spectroscopic characterization of protein structures, mechanisms, and dynamics. Although uniform isotopic labeling of proteins is straightforward, efficient labeling of proteins with only a selected set of amino acid types is often challenging. A number of approaches have been described in the literature for amino acid-selective isotope labeling of proteins, each with its own limitations. Since Escherichia coli represents the most cost-effective and widely used host for heterologous production of foreign proteins, an efficient method to express proteins selectively labeled with isotopes would be highly valuable for these studies. However, an obvious drawback is misincorporation and dilution of input isotope labels to unwanted amino acid types due to metabolic scrambling in vivo. To overcome this problem, we have generated E. coli auxotroph strains that are compatible with the widely used T7 RNA polymerase overexpression systems and that minimize metabolic scrambling. We present several examples of selective amino acid isotope labeling of simple and complex proteins with bound cofactors, as an initial guide for practical applications of these E. coli strains.

Isotope labeling of proteins in insect cells.

Protein targets of contemporary research are often membrane proteins, multiprotein complexes, secreted proteins, or other proteins of human origin. These are difficult to express in the standard expression host used for most nuclear magnetic resonance (NMR) studies, Escherichia coli. Insect cells represent an attractive alternative, since they have become a well-established expression system and simple solutions have been developed for generation of viruses to efficiently introduce the target protein DNA into cells. Insect cells enable production of a larger fraction of the human proteome in a properly folded way than bacteria, as insect cells have a very similar set of cytosolic chaperones and a closely related secretory pathway. Here, the limited and defined glycosylation pattern that insect cells produce is an advantage for structural biology studies. For these reasons, insect cells have been established as the most widely used eukaryotic expression host for crystallographic studies. In the past decade, significant advancements have enabled amino acid type-specific as well as uniform isotope labeling of proteins in insect cells, turning them into an attractive expression host for NMR studies.

Escherichia coli cell-free protein synthesis and isotope labeling of mammalian proteins.

This chapter describes the cell-free protein synthesis method, using an Escherichia coli cell extract. This is a cost-effective method for milligram-scale protein production and is particularly useful for the production of mammalian proteins, protein complexes, and membrane proteins that are difficult to synthesize by recombinant expression methods, using E. coli and eukaryotic cells. By adjusting the conditions of the cell-free method, zinc-binding proteins, disulfide-bonded proteins, ligand-bound proteins, etc., may also be produced. Stable isotope labeling of proteins can be accomplished by the cell-free method, simply by using stable isotope-labeled amino acid(s) in the cell-free reaction. Moreover, the cell-free protein synthesis method facilitates the avoidance of stable isotope scrambling and dilution over the recombinant expression methods and is therefore advantageous for amino acid-selective stable isotope labeling. Site-specific stable isotope labeling is also possible with a tRNA molecule specific to the UAG codon. By the cell-free protein synthesis method, coupled transcription-translation is performed from a plasmid vector or a PCR-amplified DNA fragment encoding the protein. A milligram quantity of protein can be produced with a milliliter-scale reaction solution in the dialysis mode. More than a thousand solution structures have been determined by NMR spectroscopy for uniformly labeled samples of human and mouse functional domain proteins, produced by the cell-free method. Here, we describe the practical aspects of mammalian protein production by the cell-free method for NMR spectroscopy.

High-throughput synthesis of stable isotope-labeled transmembrane proteins for targeted transmembrane proteomics using a wheat germ cell-free protein synthesis system

Using a wheat germ cell-free protein synthesis system, we developed a high-throughput method for the synthesis of stable isotope-labeled full-length transmembrane proteins as proteoliposomes to mimic the in vivo environment, and we successfully constructed an internal standard library for targeted transmembrane proteomics by using mass spectrometry.

Effective isotope labeling of proteins in a mammalian expression system.

Isotope labeling of biologically interesting proteins is a prerequisite for structural and dynamics studies by NMR spectroscopy. Many of these proteins require mammalian cofactors, chaperons, or posttranslational modifications such as myristoylation, glypiation, disulfide bond formation, or N- or O-linked glycosylation; and mammalian cells have the necessary machinery to produce them in their functional forms. Here, we describe recent advances in mammalian expression, including an efficient adenoviral vector-based system, for the production of isotopically labeled proteins. This system enables expression of mammalian proteins and their complexes, including proteins that require posttranslational modifications. We describe a roadmap to produce isotopically labeled (15)N and (13)C posttranslationally modified proteins, such as the outer domain of HIV-1 gp120, which has four disulfide bonds and 15 potential sites of N-linked glycosylation. These methods should allow NMR spectroscopic analysis of the structure and function of posttranslationally modified and secreted, cytoplasmic, or membrane-bound proteins.

A “Proteomic Ruler” for Protein Copy Number and Concentration Estimation without Spike-in Standards

Absolute protein quantification using mass spectrometry (MS)-based proteomics delivers protein concentrations or copy numbers per cell. Existing methodologies typically require a combination of isotope-labeled spike-in references, cell counting, and protein concentration measurements. Here we present a novel method that delivers similar quantitative results directly from deep eukaryotic proteome datasets without any additional experimental steps. We show that the MS signal of histones can be used as a “proteomic ruler” because it is proportional to the amount of DNA in the sample, which in turn depends on the number of cells. As a result, our proteomic ruler approach adds an absolute scale to the MS readout and allows estimation of the copy numbers of individual proteins per cell. We compare our protein quantifications with values derived via the use of stable isotope labeling by amino acids in cell culture and protein epitope signature tags in a method that combines spike-in protein fragment standards with precise isotope label quantification. The proteomic ruler approach yields quantitative readouts that are in remarkably good agreement with results from the precision method. We attribute this surprising result to the fact that the proteomic ruler approach omits error-prone steps such as cell counting or protein concentration measurements. The proteomic ruler approach is readily applicable to any deep eukaryotic proteome dataset—even in retrospective analysis—and we demonstrate its usefulness with a series of mouse organ proteomes.

Parallel reaction monitoring (PRM) and selected reaction monitoring (SRM) exhibit comparable linearity, dynamic range and precision for targeted quantitative HDL proteomics.

HDL, a complex matrix composed of lipids and proteins, is implicated in cardioprotection. Its cholesterol content correlates inversely with cardiovascular disease and it is the current metric to assess cardiovascular risk. However, the cholesterol content does not capture HDL's complexity and heterogeneity. Devising metrics that better capture HDL's cardioprotective effects, we developed an optimized method for quantification of HDL proteome, using PRM in concert with a single labeled protein as internal standard. The availability of a method that increases sample throughput without compromising the reproducibility, sensitivity, and accuracy could therefore point to better risk assessment for CVD or other diseases.

Development of a method for absolute quantification of equine acute phase proteins using concatenated peptide standards and selected reaction monitoring.

The aim of this study was the development of a quantitative assay that could support future studies of a panel of acute phase proteins (APPs) in the horse. The assay was based on a quantification concatamer (QconCAT) coupled to selected reaction monitoring methodology. Thirty-two peptides, corresponding to 13 putative or confirmed APPs for the Equus caballus (equine) species were selected for the design of a QconCAT construct. The gene encoding the QconCAT was synthesized and expressed as an isotope-labeled chimaeric protein in Escherichia coli. The QconCAT tryptic peptides were analyzed on a triple-quadrupole instrument, and the quantotypic properties were assessed in equine serum, wound tissue, and wound interstitial fluid. Reasonable quantotypic performance was found for 12, 14, and 14 peptides in serum, wound tissue, and interstitial fluid, respectively. Seven proteins were quantified in absolute terms in serum collected from a horse before and after the onset of a systemic inflammatory condition, and the observed protein concentrations were in close agreement with previous data. We conclude, that this QconCAT is applicable for concurrent quantitative analysis of multiple APPs in serum and may also support future studies of these proteins in other types of tissues and body fluids from the horse.

Immunoproteomics Using Polyclonal Antibodies and Stable Isotope–labeled Affinity-purified Recombinant Proteins

The combination of immuno-based methods and mass spectrometry detection has great potential in the field of quantitative proteomics. Here, we describe a new method (immuno-SILAC) for the absolute quantification of proteins in complex samples based on polyclonal antibodies and stable isotope-labeled recombinant protein fragments to allow affinity enrichment prior to mass spectrometry analysis and accurate quantification. We took advantage of the antibody resources publicly available from the Human Protein Atlas project covering more than 80% of all human protein-coding genes. Epitope mapping revealed that a majority of the polyclonal antibodies recognized multiple linear epitopes, and based on these results, a semi-automated method was developed for peptide enrichment using polyclonal antibodies immobilized on protein A-coated magnetic beads. A protocol based on the simultaneous multiplex capture of more than 40 protein targets showed that approximately half of the antibodies enriched at least one functional peptide detected in the subsequent mass spectrometry analysis. The approach was further developed to also generate quantitative data via the addition of heavy isotope-labeled recombinant protein fragment standards prior to trypsin digestion. Here, we show that we were able to use small amounts of antibodies (50 ng per target) in this manner for efficient multiplex analysis of quantitative levels of proteins in a human HeLa cell lysate. The results suggest that polyclonal antibodies generated via immunization of recombinant protein fragments could be used for the enrichment of target peptides to allow for rapid mass spectrometry analysis taking advantage of a substantial reduction in sample complexity. The possibility of building up a proteome-wide resource for immuno-SILAC assays based on publicly available antibody resources is discussed.

Quantification of XRCC and DNA-PK proteins in cancer cell lines and human tumors by LC-MS/MS.

The x-ray repair cross-complementing (XRCC) proteins and a catalytic subunit of nuclear DNA-dependent serine/threonine protein kinase (DNA-PK) play important roles in cancer biology. Understanding the protein expression levels allows us to reconstruct in vivo functionality and to qualify protein biomarkers. XRCC and DNA-PK proteins in human cancer cells and tumor tissues have been identified and quantified by selected peptides using NanoLC and high-resolution mass spectrometry. The stable isotope-labeled full-length protein XRCC4 ([(13)C6, (15)N4]-arginine and [(13)C6, (15)N2]-lysine) uses as the internal standard. The assay range is 0.140-450 fmol (coefficient of variation: 25%) for XRCC4 in bovine serum albumen. The quantitative protein expression levels for XRCC and DNA-PK in HeLa, Ramos and HEK-293 cells and tumor tissues (lung and lymphoma) are reported.

Mass Spectrometry-based Workflow for Accurate Quantification of Escherichia coli Enzymes: How Proteomics Can Play a Key Role in Metabolic Engineering

Metabolic engineering aims to design high performance microbial strains producing compounds of interest. This requires systems-level understanding; genome-scale models have therefore been developed to predict metabolic fluxes. However, multi-omics data including genomics, transcriptomics, fluxomics, and proteomics may be required to model the metabolism of potential cell factories. Recent technological advances to quantitative proteomics have made mass spectrometry-based quantitative assays an interesting alternative to more traditional immuno-affinity based approaches. This has improved specificity and multiplexing capabilities. In this study, we developed a quantification workflow to analyze enzymes involved in central metabolism in Escherichia coli (E. coli). This workflow combined full-length isotopically labeled standards with selected reaction monitoring analysis. First, full-length (15)N labeled standards were produced and calibrated to ensure accurate measurements. Liquid chromatography conditions were then optimized for reproducibility and multiplexing capabilities over a single 30-min liquid chromatography-MS analysis. This workflow was used to accurately quantify 22 enzymes involved in E. coli central metabolism in a wild-type reference strain and two derived strains, optimized for higher NADPH production. In combination with measurements of metabolic fluxes, proteomics data can be used to assess different levels of regulation, in particular enzyme abundance and catalytic rate. This provides information that can be used to design specific strains used in biotechnology. In addition, accurate measurement of absolute enzyme concentrations is key to the development of predictive kinetic models in the context of metabolic engineering.

Expression and purification of mouse peptide ESP4 in Escherichia coli

Pheromones are species-specific chemical signals that regulate a wide range of social and sexual behaviors in many animals. In mice, the male-specific peptide ESP1 (exocrine gland-secreting peptide 1) is secreted into tear fluids and enhances female sexual receptive behavior. ESP1 belongs to the ESP family, a multigene family with 38 genes in mice. ESP1 shares the highest homology with ESP4. ESP1 is expressed in the extraorbital lacrimal gland, whereas ESP4 is expressed in some exocrine glands. Thus, ESP4 is expected to have a function that has not been elucidated yet. Large amounts of the purified ESP4 protein are required for structural and biochemical studies. Here we present an expression and purification scheme for the recombinant ESP4 protein. The N-terminally histidine-tagged ESP4 fusion protein was expressed in Escherichia coli as inclusion bodies, which were solubilized and purified by nickel affinity chromatography. The histidine tag was cleaved with thrombin and removed by a second nickel affinity chromatography step. The ESP4 protein was isolated with high purity by reversed-phase chromatography. For NMR analyses, we prepared a stable isotope-labeled ESP4 protein. Three repeated freeze-drying steps after the reversed-phase chromatography were required, to remove a volatile contaminating compound and to obtain an NMR spectrum with a homogeneous line shape. AMS-modification and far-UV CD spectroscopic analyses suggested that ESP4 has an intramolecular disulfide bridge and a helical structure, respectively. The present study provides a powerful tool for structural and biochemical studies of ESP4, leading toward the elucidation of the roles of the ESP family members.