Isopropyl Substituents Research Articles

The Dialuminene AriPr8AlAlAriPr8 (AriPr8=C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2).

Careful analysis of the crystals formed in the reduction of AriPr8AlI2 (AriPr8=C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2) with sodium on sodium chloride showed them to contain the long sought-after dialuminene AriPr8AlAlAriPr8 (1) that forms alongside the previously characterized alanediyl :AlAriPr8. The single crystal X-ray structure of 1 revealed a nearly planar, trans-bent C(ipso)AlAlC(ipso) core with an Al-Al distance of 2.648(2) Å. The molecular and electronic structure of 1 are consistent with an Al-Al double dative interaction augmented with diradical character and stabilized by dispersion interactions. Density functional theory calculations showed that the reactivity of :AlAriPr8 with dihydrogen involves 1, not :AlAriPr8, as the reactive species. In contrast, the reaction of :AlAriPr8 with ethylene gave two products, the 1,4-dialuminacyclohexane AriPr8Al(C2H4)2AlAriPr8 (2) and the aluminacyclopentane AriPr8Al(C4H8) (3), that can both form from the aluminacyclopropane intermediate AriPr8Al(C2H4). Although the [2+2+2] cycloaddition of 1 with two equivalents of ethylene was also calculated to be exergonic, it is likely to be kinetically blocked by the numerous isopropyl substituents surrounding the Al-Al bond. Attempts to fine-tune the steric bulk of the terphenyl ligand to allow stronger Al-Al bonding were unsuccessful, leading to the isolation of the sodium salt of a cyclotrialuminene, Na2[AlAriPr6]3 (4), instead of AriPr6AlAlAriPr6.

Synthesis and Characterization of Diacylthiourea and Diacylthioureato Cu(I) Complexes

A series of six disubstituted diacylthioureas 1,3‐ and 1,4‐C6H4[C(O)NHC(S)NR1R2]2 (L1‐6) were synthesized with varied Rn substituents (R1 = R2 = Et for L1‐2; R1 = R2 = Bn for L3‐4; R1 = iPr and R2 = Ph for L5 (1) and L6 (2)). Treatment of Ln with Cu(I) halide precursors CuX(PPh3)3 (X = Cl, Br, I) produced the discrete binuclear adducts Ln[CuX(PPh3)2]2 (3‐11 and 14‐16; n = 1‐3 and 6) by binding to Cu(I) centres via the monodentate‐S mode. In contrast, L4 and L5 yielded only the chloride products of binuclear L4[CuCl(PPh3)2]2 (12) and mononuclear L5CuCl(PPh3)2 (13), respectively, with one S arm in the latter remaining dangling, while bromide or iodide analogues were not available for L4 and L5, possibly due to the steric hindrance imposed by larger halide anions or bulky isopropyl substituents. The reactions of Ln with nitrate [Cu(NO3)(PPh3)2]led to the double‐deprotonation of ligand protons to generate dianions Ln' (1,3‐/1,4‐C6H4[C(O)NC(S)NR1R2]22‐) and led to the consequent formation of binuclear diacylthioureato Cu(I) complexes Ln'[Cu(PPh3)2]2 (n=1 (17), 2 (18), 4 (19)) via the κ‐O,S‐bidentate mode. The obtained ligands and complexes were spectroscopically and structurally characterized. These Cu(I) products (3‐19) were experimentally used as catalysts for the oxidation of 1‐phenylethanol.

Fabrication of Novel Carbon-based Polymers by On-surface Cycloaromatization of Isopropyl Substituents

Surface-catalyzed reactions have been employed for the synthesis of carbon nanomaterials featuring precisely defined atomic structures. A recent breakthrough involves the gold surface-catalyzed [3 + 3] cycloaromatization of isopropyl-substituted arenes, allowing for on-surface synthesis of novel carbon-based polymers[1-3]. In this process, the surface plays a crucial role in activating the isopropyl substituents, facilitating the formation of phenylene rings through intermolecular coupling. For instance, such investigations might open new avenues in the field of carbon magnetism, which has gained an increased attention in view of the recent progress made in the synthesis and characterization of open-shell polycyclic aromatic hydrocarbons[2]. Under this scenario, the comprehensive fabrication of magnetic polymers emerges as a highly appealing field of research.Here, we introduce exemplary approaches toward the bottom-up fabrication of different carbon-based polymers homocoupled via surface-catalyzed [3 + 3] cycloaromatization of isopropyl substituents studied on Au(111) under ultra-high vacuum (UHV) conditions. The chemical structures of the polymers have been clearly elucidated by non-contact atomic force microscopy (nc-AFM). Scanning tunneling spectroscopy (STS), complemented by computational investigations reveals their ground state. Our approach can be a highly relevant step towards the on-surface synthesis of covalently linked 1D organic polymers with prospects in sensing, catalysis and nanoscale spintronic devices.

Study of the Influence of the Change from Methyl to Isopropyl Substituents in 1-(2,4,6-trialkylphenyl)ethanol on the Point Group Symmetry of the 0-D Hydrogen-Bonded Moiety

Study of the Influence of the Change from Methyl to Isopropyl Substituents in 1-(2,4,6-trialkylphenyl)ethanol on the Point Group Symmetry of the 0-D Hydrogen-Bonded Moiety

Transaminase-Catalyzed Synthesis of β-Branched Noncanonical Amino Acids Driven by a Lysine Amine Donor.

Transaminases are choice biocatalysts for the synthesis of chiral primary amines, including amino acids bearing contiguous stereocenters. In this study, we employ lysine as a "smart" amine donor in transaminase-catalyzed dynamic kinetic resolution reactions to access β-branched noncanonical arylalanines. Our mechanistic investigation demonstrates that, upon transamination, the lysine-derived ketone byproduct readily cyclizes to a six-membered imine, driving the equilibrium in the desired direction and thus alleviating the need to load superstoichiometric quantities of the amine donor or deploy a multienzyme cascade. Lysine also shows good overall compatibility with a panel of wild-type transaminases, a promising hint of its application as a smart donor more broadly. Indeed, by this approach, we furnished a broad scope of β-branched arylalanines, including some bearing hitherto intractable cyclopropyl and isopropyl substituents, with high yields and excellent selectivities.

Novel hybrid benzoisothiazole-1,2,3-triazole-4-carboxamides with sub-micromolar toxicity towards human breast carcinoma cells and high affinity to DNA

A pharmacophore hybridization strategy to combine biologically active scaffolds was implemented for design and synthesis of benzoisothiazole-1,2,3-triazole-4-carboxamide conjugates via piperazine linker. In vitro screening led to identification of the compounds 5h and 5j, with para-chlorine- or fluorine- substitution on the phenyl ring, and isopropyl or cyclopropyl substituents in position 5 of 1,2,3-triazole cycle as potent anticancer agents. These compounds demonstrated toxicity towards human breast adenocarcinoma cells of the MCF-7 line in sub-micromolar concentrations with IC50 = 0.76 ± 0.04 μM and 0.90 ± 0.02 μM, respectively, while showing no toxicity in normal cells (IC50 > 100 μM). Colony formation and proliferation of carcinoma MCF-7 cells were effectively inhibited by the derivatives 5h and 5j. These derivatives caused DNA fragmentation of the MCF-7 cells. We suggest that the DNA-damaging action of the compounds 5h and 5j may be related to their high capability of intercalating into DNA molecule that is comparable to such ability of known anticancer agent – the doxorubicin. High affinity of the compounds 5h and 5j for the DNA was confirmed using computational molecular docking in silico.

4-Hydroxybenzoic Acid-Based Hydrazide-Hydrazones as Potent Growth Inhibition Agents of Laccase-Producing Phytopathogenic Fungi That Are Useful in the Protection of Oilseed Crops.

The research on new compounds against plant pathogens is still socially and economically important. It results from the increasing resistance of pests to plant protection products and the need to maintain high yields of crops, particularly oilseed crops used to manufacture edible and industrial oils and biofuels. We tested thirty-five semi-synthetic hydrazide-hydrazones with aromatic fragments of natural origin against phytopathogenic laccase-producing fungi such as Botrytis cinerea, Sclerotinia sclerotiorum, and Cerrena unicolor. Among the investigated molecules previously identified as potent laccase inhibitors were also strong antifungal agents against the fungal species tested. The highest antifungal activity showed derivatives of 4-hydroxybenzoic acid and salicylic aldehydes with 3-tert-butyl, phenyl, or isopropyl substituents. S. sclerotiorum appeared to be the most susceptible to the tested compounds, with the lowest IC50 values between 0.5 and 1.8 µg/mL. We applied two variants of phytotoxicity tests for representative crop seeds and selected hydrazide-hydrazones. Most tested molecules show no or low phytotoxic effect for flax and sunflower seeds. Moreover, a positive impact on seed germination infected with fungi was observed. With the potential for application, the cytotoxicity of the hydrazide-hydrazones of choice toward MCF-10A and BALB/3T3 cell lines was lower than that of the azoxystrobin fungicide tested.

Neutral Block Copolymer Assisted Gene Delivery using Hydrodynamic Limb Vein Injection.

Three different amphiphilic block copolymer families are synthesized to investigate new opportunities to enhance gene delivery via Hydrodynamic Limb Vein (HLV) injections. First a polyoxazoline-based family containing mostly one poly(2-methyl-2-oxazoline) (PMeOx) block and a second block POx with an ethyl (EtOx), isopropyl (iPrOx) or phenyl substituent (PhOx) is synthesized. Then an ABC poly(2-ethyl-2-oxazoline)-b-poly(2-n-propyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline) triblock copolymer is synthesized, with a thermosensitive middle block. Finally, polyglycidol-b-polybutylenoxide-b-polyglycidol copolymers with various molar masses and amphiphilic balance are produced. The simple architecture of neutral amphiphilic triblock copolymer is not sufficient to obtain enhanced in vivo gene transfection. Double or triple amphiphilic neutral block copolymers are improving the in vivo transfection performances through HLV administration as far as a block having an lower critical solution temperature is incorporated in the vector. The molar mass of the copolymer does not seem to affect the vector performances in a significant manner.

Sterically Selective [3 + 3] Cycloaromatization in the On-Surface Synthesis of Nanographenes.

Surface-catalyzed reactions have been used to synthesize carbon nanomaterials with atomically predefined structures. The recent discovery of a gold surface-catalyzed [3 + 3] cycloaromatization of isopropyl substituted arenes has enabled the on-surface synthesis of arylene-phenylene copolymers, where the surface activates the isopropyl substituents to form phenylene rings by intermolecular coupling. However, the resulting polymers suffered from undesired cross-linking when more than two molecules reacted at a single site. Here we show that such cross-links can be prevented through steric protection by attaching the isopropyl groups to larger arene cores. Upon thermal activation of isopropyl-substituted 8,9-dioxa-8a-borabenzo[fg]tetracene on Au(111), cycloaromatization is observed to occur exclusively between the two molecules. The cycloaromatization intermediate formed by the covalent linking of two molecules is prevented from reacting with further molecules by the wide benzotetracene core, resulting in highly selective one-to-one coupling. Our findings extend the versatility of the [3 + 3] cycloaromatization of isopropyl substituents and point toward steric protection as a powerful concept for suppressing competing reaction pathways in on-surface synthesis.

Vinyl Phosphonates as Photopharmacological Agents: Laser‐Induced Cis‐Trans Isomerization and Butyrylcholinesterase Activity

AbstractPhotoswitchable molecules are highly requested compounds in various fields and, in particular, biomedicine. The urgent modern task of photopharmacology (an emerging approach in medicine) is the design of molecules that have both photoswitchable and bioactive properties. In this study, we present vinyl phosphonates – diene compounds with ethyl and isopropyl substituents on the phosphonate group. Both compounds demonstrated laser‐induced cis‐trans isomerization via a C=C bond after irradiation at 266 nm. The photoisomerization quantum yield was 17 % and 20 % for compounds with ethyl and isopropyl groups, respectively. The main advantage of the presented vinyl phosphonates is their bioactivity, unlike other photoswitchable molecules. Rather efficient butyrylcholinesterase inhibition by both presented compounds was demonstrated by IPC‐Micro analysis. The notable butyrylcholinesterase inhibition increase by 5 and 9 times was found for the vinyl phosphonates after laser irradiation. Such a sizeable difference in inhibition values for different isomeric states is a critical factor, which opens the way toward promising applications of vinyl phosphonates as photopharmacological agents.

(Invited) Interplay Between π–Conjugation and Exchange Magnetism in One-Dimensional Porphyrinoid Polymers

The field of carbon magnetism has gained an increased attention in view of the recent progress made in the synthesis and characterization of open-shell polycyclic aromatic hydrocarbons following a bottom-up synthetic approach[1,2]. Under this scenario, the comprehensive fabrication of magnetic porphyrinoid-based polymers emerges as a highly appealing field of research. However, the vast majority of the porphyrinoid species and polymers studied to date exhibit a closed-shell ground state[3].In this work, we introduce an exemplary approach toward the bottom-up fabrication of unprecedented magnetic porphyrinoid-based polymers homocoupled via surface-catalyzed [3 + 3] cycloaromatization of isopropyl substituents studied on Au(111) under ultra-high vacuum (UHV) conditions. The chemical structure of the polymer, formed by thermal-activated intra- and intermolecular oxidative ring closure reactions followed by controlled tip-induced hydrogen dissociation from the porphyrinoid units, have been clearly elucidated by scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). Scanning tunneling spectroscopy (STS), complemented by computational investigations reveals the open-shell character, i.e. antiferromagnetic singlet ground state (S=0) of the formed polymers, which display singlet−triplet inelastic excitations observed between spins of adjacent porphyrinoid units only along a specific π-conjugation pathway, thus revealing the interplay between π-conjugation and magnetic exchange. We envision that our approach can be a highly relevant step towards the on-surface synthesis of covalently linked 1D magnetic organic polymers with prospects in nanoscale spintronic devices.

Molecular Modelling Based on TD-DFT Applied to UV Spectra of Coumarin Derivatives

The optimization of geometry and electronic transition of seven coumarin derivatives for sunscreen activity have been conducted using Orca. DFT methods is applied to find optimum geometry and parameter data is measured like bond length and bond angle. TD-DFT is conducted to get electronic transition to get ultraviolet (UV) spectra. The result shows that the coumarin derivative transition type is n to π* and π to π*. All coumarin exhibits the properties of UV-B protection, however, two out of seven show properties as a UV-A protection. The energy difference HOMO-LUMO shows that coumarin with isopropyl substituent has the smallest energy gap, around 0.1559, whereas coumarin with fluorine atom substituent has the biggest energy gap.

Synthesis and gas separation performance of Tröger's base-containing polyimides derived from 9,9-Bis(trifluoromethyl)-2,3,6,7-xanthenetetracarboxylic dianhydride

Two imide-containing diamine monomers were prepared using 9,9-bis(trifluoromethyl)-2,3,6,7-xanthenetetracarboxylic dianhydride (6FcDA) and 2,6-dimethylaniline or 2,6-diisopropylaniline as the starting materials. Two polyimides of intrinsic microporosity (PIM-PIs), i.e., 6FcDA-Me2NH2-TB and 6FcDA-iPr2NH2-TB, were then synthesized via TB polymerization of imide-containing diamines and dimethoxymethane in trifluoroacetic acid. The surface areas, fractional free volumes, and interchain distances of the PIM-PIs were in the range of 555–569 m2 g−1, 0.16–0.20, and 0.60–0.67 nm, respectively. These values followed the order of 6FcDA-Me2NH2-TB < 6FcDA-iPr2NH2-TB owing to the larger size of isopropyl substituents relative to methyl groups. Furthermore, 6FcDA-Me2NH2-TB exhibited obvious π-π stacking interactions as evidenced by the diffraction peaks at ∼ 26 ° in wide angle X-ray diffraction patterns. Consequently, 6FcDA-Me2NH2-TB showed higher perm-selectivity but lower gas permeability as compared to 6FcDA-iPr2NH2-TB. Particularly, both polymers had a CO2 permeability of > 2900 Barrer and a CO2/CH4 selectivity of > 10, located between the 1991 and 2008 Robeson’s upper bound for CO2/CH4 separation.

A Physical Organic Chemistry Approach to Developing Cyclopropenium-Based Energy Storage Materials for Redox Flow Batteries

ConspectusRedox flow batteries (RFBs) represent a promising modality for electrical energy storage. In these systems, energy is stored via paired redox reactions of molecules on opposite sides of an electrochemical cell. Thus, a central objective for the field is to design molecules with the optimal combination of properties to serve as energy storage materials in RFBs. The ideal molecules should undergo reversible redox reactions at relatively high potentials (for the molecule that is oxidized during battery charging, called the catholyte) or low potentials (for the species that is reduced during battery charging, called the anolyte). Furthermore, anolytes and catholytes must be highly soluble in the electrolyte solution and stable to extended electrochemical cycling in all battery-relevant redox states. The ideal candidates would undergo more than one reversible electron transfer event. Finally, the optimal structures should be resistant to crossover through a selective separator in order to maintain isolation of the two sides of the cell. This Account describes our design and optimization of organic molecules for this application. We first provide background for the metrics and experiments used to characterize anolytes/catholytes and to progress them toward deployment in flow batteries. We then use our studies of aminocyclopropenium-based catholytes to illustrate this workflow and approach.We identified tris(dimethylamino) cyclopropenium hexafluorophosphate as a first-generation catholyte for nonaqueous RFBs based on literature reports from the 1970s describing its reversible chemical and electrochemical oxidation. Cyclic voltammetry and electrochemical cycling experiments in acetonitrile/LiPF6 confirmed that this molecule undergoes oxidation at relatively high potential (0.86 V versus ferrocene/ferrocenium) and exhibits moderate stability toward charge-discharge cycling. Replacing the methyl groups with isopropyl substituents led to enhanced cycling stability but poor solubility of the radical dication (<0.1 M in acetonitrile). Solubility was optimized using quantitative structure-property relationship modeling, which predicted derivatives with ≥10-fold enhanced solubility. Cyclopropeniums with 300-500 mV higher redox potentials were identified by replacing one of the dialkylamino substituents with a less electron-donating thioalkyl or aryl group. Multielectron catholytes were developed by creating hybrid structures that contain a di(amino) cyclopropenium conjugated with a phenothiazine moeity. Finally, oligomeric tris(amino) cyclopropeniums were designed as crossover resistant catholytes. Optimization of their solubility enabled the deployment of these oligomers in high concentration asymmetric redox flow batteries with energy densities that are comparable to the state-of-the-art commercial aqueous inorganic systems.

Noncovalent Interactions in Crowded Benzene Systems: How Much Strain Is Too Much? Attractions Overcome Repulsions!

AbstractIn molecular design, large alkyl groups are used to introduce bulk and steric crowding of the catalytic center to improve catalytic efficiency and selectivity. The bulky groups are highly polarizable, increasing their ability to participate in stabilizing noncovalent interactions. The rationalization of noncovalent interaction trends is of both fundamental and practical interest as it provides new design concepts for catalysis and synthesis. Highly congested molecules always present challenges to chemists. Crowded benzene systems are an important class of compounds with well-established thermodynamic properties. The latter were used in this work to develop tools to quantify the degree of stabilization or destabilization in benzene systems crowded with bulky isopropyl and tert-butyl substituents. The basic idea was to quantify the delicate balance between repulsive and attractive interactions inherent in crowded benzene systems. The ensemble of experimental thermodynamic data and DFT-D3 calculations enabled the development of quantitative scales of the dispersion contributions and their understanding at the molecular level.

Solvent Effects and Metal Ion Recognition in Several Azulenyl-Vinyl-Oxazolones

The spectral properties of several azulene-oxazolone derivatives containing a phenyloxazolone moiety linked to a substituted azulene ring via a C=C double bond were studied in different solvents of varying polarity. The solvatochromism and the ability of azulene-oxazolone derivatives to recognize heavy metal ions were investigated. In order to estimate the contribution of the non-specific and specific solute–solvent interactions, multiple linear regression analysis using Kamlet–Taft, Catalan and Laurence parameters was applied. These azulene derivatives demonstrate positive solvatochromism. The methyl and isopropyl substituents at the seven-membered azulene ring determine the highest red shifts of the absorption maxima of these azulenyl-vinyl-oxazolones. According to Catalan and Laurence models, the solvent polarizability is a more significant parameter in describing the solvatochromic properties of the azulene-oxazolone derivatives. The azulene-oxazolone compounds under study showed a good response to heavy metal cations (Cd2+, Hg2+, Cu2+ and Pb2+).

Unexpected alkyl isomerization at the silicon ligand of an unsaturated Rh complex: combined experiment and theory.

The formation of dimer [(μ-Cl)Rh-(κ3(P,Si,Si)PhP(o-C6H4CH2SiiPr2)(o-C6H4CH2SiiPrnPr))]2 (Rh-3) with an n-propyl group on one of the silicon atoms as a minor product was affected by the reaction of [RhCl(COD)]2 with proligand PhP(o-C6H4CH2SiHiPr2)2, L1. The major product of the reaction was monomeric 14-electron Rh(III) complex [ClRh(κ3(P,Si,Si)PhP(o-C6H4CH2SiiPr2)2)] (Rh-1). Computations revealed that the monomer-dimer equilibrium is shifted toward the monomer with four isopropyl substituents on the two Si atoms of the ligand as in Rh-1; conversely, the dimer is favored with only one n-propyl as in Rh-3, and with less bulky alkyl substituents such as in [ClRh(κ3(P,Si,Si)PhP(o-C6H4CH2SiMe2)2]2 (Rh-2). Computations on the mechanism of formation of Rh-3 directly from [RhCl(COD)]2 are in agreement with the experimental findings and it is found to be less energetic than if stemming from Rh-1. Additionally, a Si-O-Si complex, [μ-Cl-Rh{κ3(P,Si,C)PPh(o-C6H4CH2SiiPrO SiiPr2CH-o-C6H4)}]2, Rh-4, is generated from the reaction of Rh-1 with adventitious water as a result of intramolecular C-H activation.

A tunable family of CAAC-ruthenium olefin metathesis catalysts modularly derived from a large-scale produced ibuprofen intermediate.

A series of tunable CAAC-based ruthenium benzylidene complexes with increased lipophilicity derived from a ketone being a large-scale produced key substrate for a popular nonsteroidal anti-inflammatory drug-ibuprofen was obtained and tested in various olefin metathesis transformations. As a group, these catalysts exhibited higher activity than their known analogues containing a smaller and less lipophilic phenyl substituent on the α-carbon atom, but in individual reactions, the size of the N-aryl moiety was revealed as a decisive factor. For example, in the cross-metathesis of methyl oleate with ethylene (ethenolysis)-a reaction with growing industrial potential-the best results were obtained when the N-aryl contained an isopropyl or tert-butyl substituent in the ortho position. At the same time, in the RCM, CM, and self-CM transformations involving larger olefinic substrates, the catalysts with smaller aryl-bearing CAAC ligands, where methyl and ethyl groups occupy ortho, ortho' positions performed better. This offers a great deal of tunability and allows for selection of the best catalyst for a given reaction while keeping the general structure (and manufacturing method) of the ibuprofen-intermediate derived CAAC ligand the same.

Obtaining substituted phenol derivatives with potential antimicrobial activity

Objectives. With the growing resistance of pathogenic microorganisms to antibiotics, the development of new antimicrobial drugs offering specific mechanisms of action becomes an urgent task. Only few antimicrobials offer a broad spectrum of activity against gram-positive and gram-negative bacteria, molds, and yeasts. In this regard, the purpose of the work was to develop methods for synthesizing biologically active derivatives of alkyl-substituted phenols (reactions at the hydroxy group) to study their biological effect.Methods. The synthesis of imidazole acetates of substituted phenols was carried out in two stages. At the first stage, the chloroacetyl derivative of the selected compounds was obtained, to which imidazole was then added. O-acylation reactions at the first stage of the synthesis were carried out under varying conditions. The first version of the synthesis was carried out using chloroacetyl chloride as an acylating agent together with a high-boiling solvent. In the second variant, chloroacetic anhydride was used, along with an attempt to replace the solvent with a low-boiling one. A thymol methoxy derivative was additionally synthesized by a known method using methyl iodide and varying the reaction parameters.Results. The parameters of chloroacetylation and methoxylation of aromatic alcohols were optimized with rational selection of solvents and the ratio of reagents in the reactions. Synthesized thymol (2-isopropyl-5-methylphenol) and propofol (2,6-isopropylphenol) derivatives contained imidazole as an additional pharmacophore with affinity for microorganism cell membrane proteins. A thymol methoxy derivative comprising an aromatic ether exhibiting increased hydrophobicity was also obtained. The synthesized compounds were characterized by NMR spectroscopy.Conclusions. Chloroacetyl derivatives of aromatic alcohols can be effectively synthesized by cooling the reaction mixture using an excess quantity of an acylating agent and increasing the reaction time (compared to literature data). The yield of thymol chloroacetate was 75%, while that of propofol chloroacetate was 30%. This can be explained by the sterically hindered reaction of the propofol alcohol group, which has isopropyl substituents at the second and sixth positions of the benzene ring.

Interplay between π-Conjugation and Exchange Magnetism in One-Dimensional Porphyrinoid Polymers.

The synthesis of novel polymeric materials with porphyrinoid compounds as key components of the repeating units attracts widespread interest from several scientific fields in view of their extraordinary variety of functional properties with potential applications in a wide range of highly significant technologies. The vast majority of such polymers present a closed-shell ground state, and, only recently, as the result of improved synthetic strategies, the engineering of open-shell porphyrinoid polymers with spin delocalization along the conjugation length has been achieved. Here, we present a combined strategy toward the fabrication of one-dimensional porphyrinoid-based polymers homocoupled via surface-catalyzed [3 + 3] cycloaromatization of isopropyl substituents on Au(111). Scanning tunneling microscopy and noncontact atomic force microscopy describe the thermal-activated intra- and intermolecular oxidative ring closure reactions as well as the controlled tip-induced hydrogen dissociation from the porphyrinoid units. In addition, scanning tunneling spectroscopy measurements, complemented by computational investigations, reveal the open-shell character, that is, the antiferromagnetic singlet ground state (S = 0) of the formed polymers, characterized by singlet–triplet inelastic excitations observed between spins of adjacent porphyrinoid units. Our approach sheds light on the crucial relevance of the π-conjugation in the correlations between spins, while expanding the on-surface synthesis toolbox and opening avenues toward the synthesis of innovative functional nanomaterials with prospects in carbon-based spintronics.