Isometric Test Research Articles

The relationship between hamstring strength tests and sprint performance in female Gaelic footballers: A correlation and linear regression analysis.

To investigate the relationships between handheld dynamometer (HHD), isokinetic and Nordic hamstrings exercise (NHE) measurements of knee flexor strength and their association with sprinting performance. Cross-sectional. The relationships between HHD (prone isometric, prone break and supine break knee flexor strength tests), isokinetic and NHE peak knee flexor strength measures were examined using Pearson product correlations on 38 female footballers. A linear regression analysis was also performed for each pair of dependent variables (10 and 30 metre sprint times) and independent predictor variables (average relative peak torque for HHD, isokinetic and NHE testing). There were good correlations between HHD tests (r = 0.81-0.90, p < 0.001, R2 = 0.65-0.82), moderate correlations between HHD and isokinetic peak torque, (r = 0.61-0.67, p < 0.001, R2 = 0.37-0.44) and poor association between the HHD peak torques and isokinetic work (r = 0.44-0.46, p = 0.005-0.007, R2 = 0.20-0.21) and average power (r = 0.39-0.45, n = 36, p = 0.006-0.019, R2 = 0.15-0.22). There was a poor association between NHE peak torque and isokinetic total work (r = 0.34, p = 0.04, R2 = 0.12). No associations between knee flexor strength and sprint times were observed (p = 0.12-0.79, r2 = 0.002-0.086). Moderate to good correlations within HHD testing and poor to moderate correlations between HHD and isokinetic testing were observed. HHD knee flexor torque assessment may be useful to regularly chart the progress of hamstring rehabilitation for female footballers. Knee flexor strength assessments were not associated with sprint times in female footballers. Other aspects of knee flexor strength and sprint performance should be investigated to assist clinicians in making return to running and sprinting decisions in this population.

Reliability and validity of surface EMG assessments combined with isometric muscle strength testing in patients with abdominal rectus diastasis and asymptomatic controls

PurposePatients with abdominal rectus diastasis (ARD) may have muscular functional impairments, but clinics lack appropriate objective assessment tools. The aim was to establish the relative and absolute reliability, and convergent validity, of muscular activity using Surface Electromyography (SEMG) during isometric abdominal muscle strength testing in patients with ARD and controls without ARD.MethodsTwenty-six patients with ARD were matched for age, sex and BMI with controls without ARD. Participants were tested twice during isometric muscular contractions using SEMG located on six abdominal sites. Mean amplitude, fatigue, and recruitment order were analyzed. Relative reliability was evaluated with Intraclass Correlation Coefficients (ICC), while absolute reliability was estimated by calculating the Standard Error of Measurement and Minimal Detectable Change. Convergent validity was addressed in relation to participant characteristics, functional ability, and symptoms.ResultsMean SEMG amplitude for all abdominal wall muscle contractions showed moderate to excellent relative test–retest reliability, with ICC values ranging from 0.46 to 0.97. In contrast, fatigue and recruitment order displayed poor to moderate relative reliability in both groups. Absolute reliability measures were generally high. A moderate to high convergent validity (ARD: rho-value 0.41–0.70; Controls: rho-value 0.41–0.75) was observed for mean amplitude in relation to a functional sit-to-stand test, abdominal circumference, BMI, back pain, and quality-of-life.ConclusionsThe results of applying SEMG during isometric abdominal muscle support practicing the method in clinics, although additional development is needed with further standardization and more functional testing. Furthermore, the method demonstrates construct validity in patients with ARD and in age- and sex-matched controls.

Ink-based textile electrodes for wearable functional electrical stimulation: A proof-of-concept study to evaluate comfort and efficacy.

Functional Electrical Stimulation (FES) represents a promising technique for promoting functional recovery in individuals with neuromuscular diseases. Traditionally, current pulses are delivered through self-adhesive hydrogel Ag/AgCl electrodes, which allow a good contact with the skin, are easy-to-use and have a moderate cost. However, skin adherence decreases after a few uses and skin irritations can originate. Recently, textile electrodes have become an attractive alternative as they assure increased durability, easy integration into clothes and can be conveniently cleaned, improving the wearability of FES. However, as various manufacture processes were attempted, their clear validation is lacking. This proof-of-concept study proposes a novel set of ink-based printed textile electrodes and compares them to adhesive hydrogel electrodes in terms of impedance, stimulation performance and perceived comfort. The skin-electrode impedance was evaluated for both types of electrodes under different conditions. These electrodes were then used to deliver FES to the Rectus Femoris of 14 healthy subjects to induce its contraction in both isometric and dynamic conditions. This allowed to compare the two types of electrodes in terms of sensory, motor, maximum and pain thresholds, FES-induced range of motion during dynamic tests, FES-induced torque during isometric tests and perceived stimulation comfort. No statistically significant differences were found both in terms of stimulation performance (Wilcoxon test) and comfort (Generalized Linear Mixed Model). The results showed that the proposed ink-based printed textile electrodes can be effectively used as alternative to hydrogel ones. Further experiments are needed to evaluate their durability and their response to sterilizability and stretching tests.

An improved linear systems model of hydrothermal isometric tension testing to aid in assessing bone collagen quality: Effects of ribation and type-2 diabetes.

This study sought to further develop and validate a previously proposed physics-based model that maps denaturation kinetics from differential scanning calorimetry (DSC) to the isometric tension generated during hydrothermal isometric tension (HIT) testing of collagenous tissues. The primary objectives of this study were to verify and validate two physics-based model parameters: α, which indicates the amount of instantaneous isometric tension developed per unit of collagen denaturation, and β, which captures the proportionality between temperature and the generated isometric tension post denaturation initiation. These parameters were used as measures of bone collagen quality, employing data from HIT and DSC testing of human bone collagen from two previous studies. Additionally, given the physical basis of the model, the study aimed to further validate Max.Slope, the rate of change in isometric tensile stress with change in temperature, as an independent measure of collagen network connectivity. Max.Slope has previously been positively correlated with measures of cortical bone fracture resistance. Towards this verification and validation, the hypotheses were a) that α would correlate strongly with HIT denaturation temperature, Td, and the enthalpy of melting (ΔH) from DSC, and b) that β would correlate positively and strongly with Max.Slope.The model was employed in the analysis of HIT-DSC data from the testing of demineralized bone collagen isolated from cadaveric human femurs in two prior studies. In one study, data were collected from HIT-DSC testing of cortical bone collagen from 74 donors. Among them, 38 had a history of type 2 diabetes +/− chronic kidney disease, while the remaining 36 had no history of T2D again with or without CKD. Cortical bone specimens were extracted from the lateral mid-shaft. The second study involved 15 donor femora, with four cortical bone specimens extracted from each. Of these four, two specimens underwent a 4-week incubation in 0.1 M ribose at 37 °C to induce non-enzymatic ribation and advanced glycation endproducts, while the other two served as non-ribated controls.The examination involved investigating correlations between the model parameters α and β and various measures, such as Max.Slope, Td, ΔH, age, and duration of type 2 diabetes. The results revealed positive correlations between the model parameter β and Max.Slope (r = 0.55–0.58). The parameter α was found to be associated with Td, but also sensitive to the shape of the HIT curve around Td resulting in difficulties with variability and interpretation. As a result, while both hypotheses are confirmed, Max.Slope and β are better indicators of bone collagen quality because they are measures of the connectivity or, more generally, the integrity of the bone collagen network.

Examining Changes in Shoulder Strength, Lower Body Power, and Body Composition among Collegiate Baseball Players after Completion of a Summer Baseball League Season.

The strength of the shoulder musculature involved with internal rotation and arm extension plays an important role in the overhead throwing motion for baseball athletes, both for throwing-related performance and injury risk. The maintenance of shoulder strength is a high priority for baseball athletes throughout a season; however, little is known in regards to the expected changes in strength throughout a season. To examine pre-post changes in shoulder strength, lower body power, and body composition among collegiate baseball players after the completion of a summer baseball league season. Amateur baseball players (n = 12; age: 20.9 ± 1.0 years.; height: 181.6 ± 5.6 cm; body mass: 86.4 ± 11.1 kg; BMI: 26.0 ± 2.6 kg/m2) participated in the current study. Pre- and post-competitive season, the participants completed shoulder strength assessments and body composition and countermovement vertical jump (CMJ) tests. An upper-body isometric test (athletic shoulder [ASH] test) was used to evaluate shoulder strength for each arm. Each subject completed maximal isometric contractions for both the throwing and non-throwing arms at four separate angles of abduction (180°, 'I'; 135°, 'Y'; 90°, 'T'; and -180°, 'A') while lying in a prone position. For shoulder strength, the primary dependent variable of interest was a composite measure that represented the average of the forces produced across all four positions of the ASH test (I, Y, T, A). For the ASH test composite measure, there was a trend toward a significant arm-by-time interaction effect (p = 0.08), as shoulder strength decreased by 9.03% for the throwing arm (ES = 0.72; 95% CI = [-0.27, -0.01]), compared to only 2.03% for the non-throwing arm (ES = 0.15; 95% CI = [-0.16, 0.09]), over the course of the season. The main effects of time (p = 0.16) and arm (p = 0.58) were not significant for the ASH test composite measure. There was no relationship between lower body power and throwing arm strength at baseline (r = 0.20, p = 0.56), and only a non-significant weak relationship at post-test (r = 0.28, p = 0.41). Throughout a season, baseball players may experience reductions in shoulder strength of the throwing arm with minimal changes in shoulder strength in the non-throwing arm.

Evaluating the between-day reliability and likelihood of change of a test battery incorporating vastus lateralis muscle thickness, ankle-brachial pressure index, maximal voluntary torque, and six-minute walk test in patients with claudication.

The study aims to evaluate the between-day reliability of a proposed test battery for patients with claudication that can be used for monitoring the effectiveness of exercise interventions and other therapeutic strategies tailored to this patient population. Twenty-five men with claudication were recruited. The test battery consisted of the Vastus Lateralis muscle thickness (VL-MT), ankle-brachial pressure index (ABI), unilateral isometric knee extension maximal voluntary torque (MVT) and 6-minute walk test (6MWT). A single investigator conducted the tests for each patient on two separate testing sessions (T1 and T2) 5-7days apart. Good to excellent reliability was observed for VL-MT (ICC = 0.95, 95% LOA = ±3.10mm, SEM = 0.81mm), ABI (ICC = 0.97, 95% LOA = ±0.10, SEM = 0.02), MVT (ICC = 0.97, 95% LOA = ±24.0N·m, SEM = 6.31N·m), 6MWT distance (ICC = 0.99, 95% LOA = ±39.6m, SEM = 11.0m), 6MWT time to claudication (ICC = 0.99, 95% LOA = ±30.8s, SEM = 7.8s), and 6MWT ratings of pain (ICC = 0.87, 95% LOA = ±2.4 CR-10+, SEM = 0.7 CR-10+ ). Analysis derived from reliability data indicates a change of 1.4mm for VL-MT, 0.14 for ABI, 12N·m for MVT, 25m for 6MWT distance, 15s for 6MWT time to claudication and 1 CR-10+ for 6MWT ratings of pain is required to be interpreted as the minimum 'likely' change (76% chance). The test battery provides a reliable assessment of patients with claudication and can be widely used to evaluate the effects of exercise programmes and other therapeutic interventions. For the individual, changes in VL-MT, ABI, MVT, and 6MWT greater than the minimum likely change as a result of an exercise programme or an intervention are likely changes and less influenced by error associated with the test.

Test-retest reliability and concurrent validity of knee extensor strength measured by a novel device incorporated into a weight stack machine vs. handheld and isokinetic dynamometry.

The current clinical gold standard for assessing isometric quadriceps muscle strength is an isokinetic dynamometer (IKD). However, in clinics without an IKD, clinicians default to using handheld dynamometers (HHD), which are less reliable and accurate than the IKD, particularly for large muscle groups. A novel device (ND) was developed that locks the weight stack of weight machines, and measures forces applied to the machine, turning this equipment into an isometric dynamometer. The objectives of this study were to characterize the test-retest reliability of the ND, determine the within-day and between-days inter-rater reliability and concurrent validity compared with that of the HHD, in healthy volunteers (HV) and individuals with knee osteoarthritis (OA) for measuring knee extensors isometric muscle force. 29 healthy (age = 28.4 ± 7.4 years) and 15 knee OA (age = 37.6 ± 13.4 years) participants completed three maximum force isometric strength testing trials on dominant side knee extensor muscles on three devices (ND, HHD, and IKD) in two separate sessions by two raters. The maximum force (Fmax) produced, and the force-time series were recorded. Reliability and validity were assessed using Intraclass Correlation Coefficient (ICC), Bland-Altman Plots, Pearson's r, and cross-correlations. The ND demonstrated excellent test-retest reliability (ICC2,3 = 0.97). The within-day (ICC2,3 = 0.88) and between-day inter-rater reliability (ICC2,3 = 0.87) was good for HHD. The ND showed excellent within-day (ICC2,3 = 0.93) and good between-day (ICC2,3 = 0.89) inter-rater reliability. The Bland-Altman analysis revealed HHD systematic bias and underestimation of force particularly with quadriceps force values exceeding 450 N. Mean differences were found in maximum force between HHD vs. IKD (MDabs = 58 N, p < .001) but not the HHD vs. ND (MDabs = 24 N, p = .267) or ND vs. IKD (MDabs = 34 N, p = .051). The concurrent validity of Fmax (r = 0.81) and force-time curve correlation (0.96 ± 0.05) were the highest between the ND and IKD. The ND's test-retest reliability and concurrent validity make it a potential strength assessment tool with utility in physical therapy and fitness settings for large muscle groups such as the knee extensors.

The health-related physical fitness of university female students with and without generalized joint hypermobility: A case-control study

Objective: To evaluate the effect of generalized joint hypermobility (GJH) on health-related physical fitness. Participants: Female university students between the ages of 18-23. Methods: Cardiorespiratory fitness ((maximal cycling ergometer tests, six-minute walking tests (6MW)), respiratory function tests, respiratory muscle strength (maximal inspiratory and expiratory pressure), body composition (bioelectrical impedance analyses), flexibility (sit and reach tests (SRT), muscle strength and endurance (isometric and isokinetic tests) were evaluated for health-related physical fitness. Results: The mean VO2max (23.6 vs. 21.8, p=.049), MET (6.7 vs. 6.3, p=0.049), W/kg (1.6 vs. 1.5, p=0.035), and SRT scores (23.3 vs. 18.7, p=0.016) were higher in 39 students with asymptomatic GJH compared to 42 non-GJH students. No significant differences found between groups for 6MW, FVC, FEV1, MIP, MEP, body composition, muscle strength, and endurance (p&gt;.05). Conclusion: Females with generalized joint hypermobility have the same or even higher levels of physical fitness capacity as those without the hypermobility.

Force-Time Characteristics in Collegiate Weightlifters Using Two Isometric Pull Protocols

The isometric mid-thigh pull (IMTP) is commonly used to measure isometric strength of characteristics of weightlifters. The isometric pull from the start position (IPSP) has not been studied as much as the IMTP but may potentially be a viable option for a weightlifting monitoring program. This study aims to compare isometric force-time characteristics from both the IMTP and IPSP to weightlifting competition performance. Collegiate weightlifters’ performances were compared to isometric peak force (IPF), rate of force development (RFD), and allometrically scaled peak force (IPFa) of both isometric testing protocols by a Pearson’s Correlation Coefficient. Strong correlations between weightlifting performance and force-time characteristics for both protocols were found with IPSP having slightly higher correlations. This suggests that both isometric testing protocols are viable tools for predicting weightlifting performance. It may be useful to include both protocols in a weightlifting monitoring program.

Psychological Factors Are Related to Neuromuscular Asymmetries After Anterior Cruciate Ligament Reconstruction.

After an anterior cruciate ligament reconstruction (ACLR), only 47% of military members return to full duty, possibly due to persistent neuromuscular asymmetries. Psychological factors may also contribute to reduced return to duty in military members. Psychological factors and time since surgery would be associated negatively with neuromuscular asymmetries, asymmetries would be greater in cadets postsurgery when compared with healthy controls, and asymmetries would be greater at earlier timepoints after ACLR. Case control. Level 4. This study examined the relationship between psychological factors and time since surgery with neuromuscular asymmetry, compared neuromuscular asymmetries between cadets with and without a history of ACLR, and explored differences in neuromuscular asymmetries at different timepoints in cadets with a history of ACLR. A total of 37 cadets post-ACLR (18.3 ± 9 months) and 28 controls participated. Psychological factors were assessed using the Tampa Scale of Kinesiophobia and Anterior Cruciate Ligament-Return to Sport after Injury scale (ACL-RSI). Participants performed a drop-jump landing, joint positioning sense (JPS), and isometric quadriceps strength testing. Peak vertical ground-reaction forces (vGRF), absolute angle of replication, peak quadriceps torque, rate of torque development (RTD), and RTD time torque interval 200 ms (TTI200) were analyzed. The ACL-RSI score was significantly related to limb symmetry index (LSI) peak quadriceps torque (r = 0.617, P < 0.01), LSI RTD (r = 0.367, P = 0.05), and LSI TTI200 (r = 0.0489, P < 0.01), but not time since surgery, JPS, or LSI peak vGRF. Cadets with a history of ACLR had significantly lesser ACL-RSI scores and greater asymmetries compared with controls. Reduced psychological readiness was associated with increased neuromuscular asymmetries after ACLR. Clinicians should assess psychological readiness during rehabilitation after ACLR.

Sympathetic Overactivity and Parasympathetic Impairment in Type 2 Diabetes: An Analysis of Cardiovascular Autonomic Functions.

Background Cardiovascular autonomic dysregulation is a known complication of Type 2 diabetes mellitus (T2DM), characterized by dysregulation in heart rate (HR) and blood pressure (BP). These disruptions in cardiovascular autonomic control can significantly influence the morbidity and mortality associated with the disease. Objectives This study aims to investigate how T2DM affects cardiovascular autonomic functions by comparing responses in HR, BP, and specific autonomic function tests between a control group without diabetes and a study group with diabetes. The research questions focus on assessing HR variability, baroreflex sensitivity, and other autonomic parameters to determine the extent of cardiovascular autonomic dysregulation in diabetic patients. Methods This cross-sectional study involved 200 adults, divided equally between a control group (n = 100) and a T2DM study group (n = 100). The exclusion criteria included cardiovascular diseases and renal impairment. Data collection involved assessing baseline characteristics such as age and BMI. Cardiovascular measures, including HR, systolic blood pressure (SBP), and diastolic blood pressure (DBP), were recorded after a five-minute rest. Autonomic function tests assessed sympathetic and parasympathetic responses, including the cold pressor test and the isometric hand grip exercise test. The statistical analysis was conducted using IBMSPSSStatistics for Windows, Version 25 (Released 2017; IBM Corp., Armonk, New York, United States), focusing on independent t-tests to compare between groups, considering p-values <0.05 as significant. Potential confounding variables like age and BMI were accounted for in the analysis to ensure robust findings Results The study group showed a higher average BMI (28.95 ± 5.60) compared to the control group (26.50 ± 5.70) and an increased resting HR (74.20 ± 8.60 bpm vs. 69.30 ± 9.10 bpm). The SBP was slightly higher in the study group (115.00 ± 19.00 mmHg vs. 114.50 ± 8.90 mmHg), while the DBP was lower (71.50 ± 10.70 mmHg vs. 72.80 ± 6.70 mmHg). The autonomic function tests showed a smaller increase in SBP (106.80 ± 11.00 mmHg) and a larger increase in DBP (75.90 ± 8.30 mmHg) upon standing in the study group compared to controls. The cold pressor test indicated increased sympathetic activity in the study group, with significant rises in SBP (133.70 ± 10.30 mmHg) and DBP (83.40 ± 9.00 mmHg) compared to the control group (SBP: 114.31 ± 11.87 mmHg, DBP: 71.85 ± 8.67 mmHg). These findings demonstrate marked differences in cardiovascular autonomic responses between the groups. Conclusions This study demonstrates that T2DM significantly impacts cardiovascular autonomic functions, with diabetic patients showing altered HR and BP indicative of increased sympathetic and decreased parasympathetic activity. These autonomic dysfunctions may heighten cardiovascular risk in diabetic individuals. Our findings highlight the importance of monitoring and managing cardiovascular autonomic functions in diabetic patients to reduce their risk of cardiovascular complications. Further research should investigate the underlying mechanisms and the effectiveness of interventions to improve autonomic function in this population.

The reliability, variability and minimal detectable change of multiplanar isometric trunk strength testing using a fixed digital dynamometer

ABSTRACT Trunk strength plays a vital role in athletic performance, rehabilitation and general health, however, current assessment methods are expensive, non-portable or unreliable. This study aimed to investigate the within- and between-session reliability, variability, standard error of measurement and minimal detectable change (MDC) of trunk strength in the sagittal (flexion and extension) and frontal planes (left and right lateral flexion) using a fixed digital dynamometer. Eighteen participants (ten men and eight women) attended two sessions separated by 7 days. Participants were fitted with a trunk harness which was secured to an immovable base via a digital dynamometer. Three maximal voluntary isometric contractions were completed across four positions (prone, supine, left-side recumbent and right-side recumbent, respectively) on a glute-hamstring raise machine. All positions demonstrated excellent reliability and low variability within session (ICC: 0.95–0.98; CV: 5–7%) and between sessions (ICC: 0.98–0.99; CV: 4–6%), across all positions. The between-session MDC ranged from 8% (prone) to 13% (right-side recumbent), translating to absolute values between 2.9 and 3.2 kg across all positions. Maximal isometric force testing using a fixed digital dynamometer provides reliable measurements of multiplanar trunk strength, providing a practical method for use in clinical practice.

Relationship Between Two Years of Muscle Strength Decrease and Volume Loss of Menisci and Cartilage According to Knee Pain in Mild and Moderate Knee Osteoarthritis.

To explore the relationship between two-year changes in muscle strength and cartilage according to knee pain in mild and moderate knee Osteoarthritis (OA). 279 participants were retrospectively obtained from the Osteoarthritis Initiative. Western Ontario McMaster University (WOMAC) and Knee Injury and Osteoarthritis Outcome Score were used to assess pain and function. Five muscles strength (maximum extensor and flexor, normalized maximum extensor and flexor, and extensor/flexor ratio) were measured from isometric strength test. Menisci and cartilage volumes were measured from MRI to assess two-year of OA progression. Mild and moderate knee OA progression was characterized by patellofemoral cartilage loss and meniscal degeneration. For WOMAC pain >2 participants, decrease in extensor strength and normalized extensor strength were positively correlated with medial meniscus volume loss (r = 0.261, P = 0.021; r = 0.232, P = 0.041, respectively). The extensor/flexor ratio changes were positively associated with WOMAC function changes (r = 0.291, P = 0.013) over two-year. The study observed a positive correlation between quadriceps strength decrease and medial meniscus degeneration in mild and moderate knee OA patients with WOMAC pain >2. These findings suggested quadriceps-hamstrings balance possibly plays a protective role in knee function for participants with weaker quadriceps and severe pain.

Seahorse-Tail-Inspired Soft Pneumatic Actuator: Development and Experimental Characterization.

The study of bio-inspired structures and their reproduction has always fascinated humans. The advent of soft robotics, thanks to soft materials, has enabled considerable progress in this field. Over the years, polyps, worms, cockroaches, jellyfish, and multiple anthropomorphic structures such as hands or limbs have been reproduced. These structures have often been used for gripping and handling delicate objects or those with complex unknown a priori shapes. Several studies have also been conducted on grippers inspired by the seahorse tail. In this paper, a novel biomimetic soft pneumatic actuator inspired by the tail of the seahorse Hippocampus reidi is presented. The actuator has been developed to make a leg to sustain a multi-legged robot. The prototyping of the actuator was possible by combining a 3D-printed reinforcement in thermoplastic polyurethane, mimicking the skeletal apparatus, within a silicone rubber structure, replicating the functions of the external epithelial tissue. The latter has an internal channel for pneumatic actuation that acts as the inner muscle. The study on the anatomy and kinematic behaviour of the seahorse tail suggested the mechanical design of the actuator. Through a test campaign, the actuator prototype was characterized by isotonic tests with an external null load, isometric tests, and activation/deactivation times. Specifically, the full actuator distension of 154.5 mm occurs at 1.8 bar, exerting a maximum force of 11.9 N, with an activation and deactivation time of 74.9 and 94.5 ms, respectively.

The Effects of Acute Deep Seawater Supplementation on Muscle Function after Triathlon.

(1) Background: Trainers and athletes have always sought to reduce the failure of muscle function during long endurance events. However, nowadays, it is a topic that is generating much debate in the scientific field. Currently, deep-sea water (DSW) intake seems to be a suitable hydration alternative for this type of endurance event. Therefore, the aim of this study was to determine whether DSW consumption during a triathlon event could preserve muscle function after exercise. (2) Methods: Nineteen trained male triathletes (age = 39.0 ± 4.25 years; BMI = 23.67 ± 1.81 kg/m2) randomly performed three triathlons, one of them consuming DSW (Totum SPORT 30 AB, Laboratories Quinton International, S.L., Spain), the other consuming isotonic placebo and the last with tap water-hydration. A vertical jump test with countermovement and an isometric muscle strength test were conducted before and after the triathlon test. (3) Results: There was a significant difference between treatment × time during the isometric muscle strength test. Based on the Tukey post hoc analysis, the peak net force decreased statistically in the placebo (p = 0.045) and control conditions (p = 0.026), but not in the experimental condition (p = 0.121). In addition, all of the conditions studied obtained similar results in the countermovement vertical jump after exercise. (4) Conclusions: As a result, consumption of DSW seems to delay the failure of muscle function specifically in isometric exercises but does not improve performance in sports. Thus, DSW does not alter muscle capacity in a negative way; therefore, its consumption may be recommended.

Biomechanical evaluation of the wrist after scaphotrapeziotrapezoid arthrodesis.

The main objective of the present study was to present the biomechanical properties of the wrist in patients who underwent scaphotrapeziotrapezoid arthrodesis when compared to a healthy control hand. The study group consisted of 29 consecutive patients who underwent a scaphotrapeziotrapezoid wrist arthrodesis at least 1year before the research onset. Both hands of all patients were examined in 4 main categories. Average score obtained in the VAS, before the surgery, without motion of the wrist was 5.21 (SD = 3.04), whereas with wrist motion, it was 8.10 (SD = 1.37). Nineteen (65.52%) patients exhibited weakened wrist muscle strength. After the surgery, only 5 (17.24%) patients declared pain in the wrist. Furthermore, the results obtained in the VAS statistically significant differed from the ones before (p < 0.05). Twenty-eight (96.55%) patients were able to resume their profession. Twenty-seven (93.10%) patients stated that they would opt for the operation again. The peak torque during the analysis of extension of the wrist in the isometric protocol was found to be 8.1Nm (SD = 2.9), 7.9Nm (SD = 2.3), and 7.9Nm (SD = 2.5) in the operated hands and 10.9Nm (SD = 3.2), 9.6Nm (SD = 2.9), and 9.1Nm (SD = 3.8) in non-operated hand for 30° extension, no-flexion, and 30° flexion positions, respectively (p < 0.05). The current study is the first to present the biomechanical parameters of flexor and extensor muscles of the wrist and fingers in patients after the said procedure. Biomechanical assessments with additional isometric, isotonic, and isokinetic tests provide an opportunity to objectify treatment outcomes and guide appropriate rehabilitation by monitoring its effects. III.

Sex-Related and Performance Differences in Contractile Properties, ROM, Strength, and Dynamometry Performance of World-Class Flatwater Canoeists

The inclusion of women canoe in the Olympic Games reflects the growth and development that women have ahead of them in this modality. Therefore, the aim of this study was to explore sex and performance level differences in muscle contractile properties through Tensiomyography (TMG), range of motion (ROM), strength, and canoe-specific functional electromechanical dynamometry (FEMD) performance and establish performance differences between international medalists and non-medalists. Twelve male and nine female canoeists from the Spanish and Portuguese national canoe teams were assessed through TMG, ROM, strength, and canoe-specific isometric and incremental FEMD tests. Few sex and performance level differences were found in TMG and ROM; however, significant sex differences were found in the strength and FEMD tests. Male canoeists had a greater Fmax in Leg Press, Pm and Pmax in canoe position cable row, 1RM bench press and bench pull, Fm and Fpeak canoe-specific isometric FEMD test and number of strokes, and Fpeak and Pmax on the incremental FEMD test than females. International medalists showed a lower time until reaching Vmax and Pmax in Leg Press on both sides and a greater number of strokes and Fpeak in the maximal incremental FEMD test than non-medalists. This study reinforces the utility of the use of TMG and FEMD for assessing and monitoring world-class athletes.

General Muscle Torque Generator Model for a Two Degree-of-Freedom Shoulder Joint.

Muscle torque generators (MTGs) have been developed as an alternative to muscle-force models, reducing the muscle-force model complexity to a single torque at the joint. Current MTGs can only be applied to single Degree-of-freedom (DoF) joints, leading to complications in modeling joints with multiple-DoFs such as the shoulder. This study aimed to develop an MTG model that accounts for the coupling between 2-DoF at the shoulder joint: shoulder plane of elevation (horizontal abduction/adduction) and shoulder elevation (flexion/extension). Three different 2-DoF MTG equations were developed to model the coupling between these two movements. Net joint torques at the shoulder were determined for 20 participants (10 females and 10 males) in isometric, isokinetic, and passive tests. Curve and surface polynomial fitting were used to find the best general fit for the experimental data in terms of the different degrees of coupling. The models were validated against experimental isokinetic torque data. It was determined that implicit coupling that used interpolation between single-DoF MTGs resulted in the lowest root-mean-square percent error of 8.5%. The work demonstrated that general MTG models can predict torque results that are dependent on multiple-DoFs of the shoulder.

Effect of pain on cranio-cervico-mandibular function and postural stability in people with temporomandibular joint disorders.

Neck and jaw pain is common and is associated with jaw functional limitations, postural stability, muscular endurance, and proprioception. This study aimed to investigate the effect of jaw and neck pain on craniocervico- mandibular functions and postural stability in patients with temporomandibular joint disorders (TMJDs). Fifty-two patients with TMJDs were included and assessed using Fonseca's Questionnaire and the Helkimo Clinical Dysfunction Index. An isometric strength test was performed for the TMJ depressor and cervical muscles. The TMJ position sense (TMJPS) test and cervical joint position error test (CJPET) were employed for proprioception. Total sway degree was obtained for the assessment of postural stability. Deep neck flexor endurance (DNFE) was assessed using the craniocervical flexion test. The mandibular function impairment questionnaire (MFIQ) was employed to assess mandibular function, and the craniovertebral angle (CVA) was measured for forward head posture. Jaw and neck pain negatively affected CVA (R2 = 0.130), TMJPS (R2 = 0.286), DNFE (R2 = 0.355), TMJ depressor (R2 = 0.145), cervical flexor (R2 = 0.144), and extensor (R2 = 0.148) muscle strength. Jaw and neck pain also positively affected CJPET for flexion (R2 = 0.116) and extension (R2 = 0.146), as well as total sway degree (R2 = 0.128) and MFIQ (R2 = 0.230). Patients with painful TMJDs, could have impaired muscle strength and proprioception of the TMJ and cervical region. The jaw and neck pain could also affect postural stability, and the endurance of deep neck flexors as well as mandibular functions in TMJDs.

Effects of plyometric training techniques on vertical jump performance of basketball players.

The aim of our study was to compare the effects of two different plyometric training programs (targeting knee extensors or plantar flexors) on jump height and strength of leg muscles. Twenty-nine male basketball players were assigned to the knee-flexed (KF), knee-extended (KE), or control groups. In addition to regular training, the KF group performed plyometric jumps (10 sets of 10 jumps, 3 sessions/week, 4weeks) from 50cm boxes with the knee flexed (90°-120°), whereas the KE group performed the jumps from 30cm boxes with the knee much more extended (130°-170°). Jumping ability was evaluated with squat jumps (SJs), countermovement jumps (CMJs), and drop jumps from 20cm (DJ20) and 40cm (DJ40). Knee and ankle muscles were assessed during maximal isokinetic and isometric tests, and EMG activity was recorded from vastus lateralis and medial gastrocnemius. The KF group increased SJ (+10%, d=0.86) and CMJ (+11%, d=0.70) but decreased DJ40 height (-7%, d=-0.40). Conversely, the KE group increased DJ20 (+10%, d=0.74) and DJ40 (+12%, d=0.77) but decreased SJ height (-4%, d=-0.23). The reactivity index during DJs increased (+10% for DJ20, d=0.47; +20% for DJ40, d=0.91) for the KE group but decreased (-10%, d=-0.48) for the KF group during DJ40. Plantar flexor strength increased for the KE group (d=0.72-1.00) but not for the KF group. Negative transfer across jumps is consistent with the principle of training specificity. Basketball players interested to perform fast rebounds in their training should avoid plyometric jumps with large knee flexions and long contact times.