Isometric Rate Of Torque Development Research Articles

Reactive Strength Index, Rate of Torque Development, and Performance in Well-Trained Weightlifters: A Pilot Study.

The purpose of this study was to investigate the correlation between the reactive strength index (RSI) using the drop jump (DJ) and the isometric rate of torque development (RTD) with weightlifting performance in national-level weightlifters. Seven male weightlifters (age: 28.3 ± 5.7 years, body mass: 80.5 ± 6.7 kg, body height: 1.73 ± 0.07 m) participated in this study. Measurements were performed 2 weeks prior to the national championship and included the countermovement jump (CMJ), the squat jump (SJ), the DJ from three different drop heights (20, 30, and 40 cm), and the isometric peak torque (IPT) and RTD. Performance in CMJ and SJ was significantly correlated with weightlifting performance (r ranging from 0.756 to 0.892). Significant correlations were found between weightlifting performance with DJ contact time (r ranging from -0.759 to -0.899) and RSI (r ranging from 0.790 to 0.922). Moreover, the best RSI was significantly correlated with the snatch (r = 0.921, p = 0.003) and total performance (r = 0.832, p = 0.020). Small to very large correlations were found between IPT and RTD with weightlifting performance (r ranging from 0.254 to 0.796). These results suggest that RSI and contact time variables from DJ may predict weightlifting performance in well-trained weightlifters. Additionally, IPT and RTD may provide useful insights into the neuromuscular fitness condition of the weightlifter.

The association between knee muscle performance and clinical outcomes of knee function 1–4 years after a sport-related knee joint injury

ObjectiveEstimate the association between index leg knee muscle strength and rate of torque development (RTD), and self-reported and performance-based (i.e., hop) knee function in persons 1–4 years after a sport-related knee joint injury. MethodsData were collected at baseline of a clinical trial. Assessments included the Knee injury and Osteoarthritis Outcome Score Sport & Recreation subscale (KOOSsport), 6-m timed hop (TH), and peak concentric isokinetic knee extensor and flexor torque and isometric RTD. Associations between peak torque and RTD with KOOSsport and TH were assessed using multivariable regression with nonlinear transformations. Results53 participants (64.2% female) were included. Knee extensor peak torque was nonlinearly related to TH time, with a strong inverse relationship at lower torque values that changed as torque increased. Results were inconsistent for flexor peak torque, extensor RTD and flexor RTD, with inconsistencies in relationship shape and estimates of association between primary and sensitivity analyses. There was no association between strength/RTD and KOOSsport. ConclusionThere was a nonlinear relationship between knee extensor strength and hop function, with lower strength being associated with a stronger relationship. As strength values increased, the relationship attenuated. Knee extensor and flexor strength, or RTD, were not associated with self-reported function.

Calcaneal tendon stiffness is not associated with dynamic time-dependent contractile output.

The ability to rapidly generate muscular torque and velocity is important in specialized activities and daily tasks of living. Tendon stiffness is one factor in the neuromuscular system that influences musculoskeletal torque transmission. Previous studies have reported weak-to-moderate correlations between tendon stiffness and rate of torque development (RTD). However, these correlations have been reported only for isometric contractions, which may not be relevant to contractions involving joint rotation (i.e., dynamic). The purpose was to investigate the effect of calcaneal tendon stiffness on the dynamic RTD and rate of velocity development (RVD) in plantar flexor muscles. Young adult males (n=13) and females (n=2) performed prone isometric- and isotonic-mode maximal voluntary plantar flexion contractions (MVC). Ultrasound imaging was used to quantify tendon morphological characteristics to estimate Young's elastic modulus (YM). Maximal voluntary and electrically evoked (300 Hz) isometric- and isotonic-mode (at 10% and 40% MVC loads) contractions were evaluated for RTD and RVD through a 25° ankle joint range of motion. YM was correlated with isometric RTD, but only for evoked contractions (RTD0-50 ms: r=0.54, p=0.02, RTD0-200 ms: r=0.62, p=0.01). Conversely, YM was not correlated with dynamic RTD (voluntary: r = -0.07-0.41, p=0.06-0.40, evoked: r = -0.2-0.3, p=0.14-0.24) nor RVD (voluntary: r = -0.08-0.24, p=0.27-0.40, evoked: r=0.12-0.3, p=0.14-0.34). These correlations would indicate that calcaneal tendon stiffness is an important factor for rapid isometric torque development, but less so for isotonic contractions. The determinants of dynamic contractile rates are more complex and warrant further study.

Effects of a Thorstensson fatiguing protocol on isometric and isokinetic performance

OBJECTIVE: Having participants perform 50 maximal isokinetic contractions, as introduced by Thorstensson and Karlsson (1976), is to this day one of the most commonly used fatigue protocols. Purpose: To determine to what extent a Thorstensson fatiguing protocol affects isokinetic and isometric performance characteristics. METHODS: Twenty-five college-aged men performed an isokinetic fatigue protocol consisting of 50 maximal elbow flexions at a moderate speed (180∘⋅s-1). Pre- and post-tests were used to calculate fatigue indices (FI%) for the following variables: isometric and isokinetic peak torque (PT), isometric rate of torque development (RTD), and maximum acceleration (ACCmax). RESULTS: Each of the four dependent variables significantly decreased with fatigue (each demonstrated p< 0.001), but not of the same magnitude. Isometric PT FI (-18.7%) was significantly less than isokinetic PT FI (-45.1%, p⩽ 0.001) and ACCmax FI (-26.3%) was significantly less than isometric RTD FI (-54.9%, p⩽ 0.001). There was a significant positive relationship between isometric and isokinetic PT FI% (r= 0.60, p< 0.002) as well as between isometric PT FI% and RTD FI% (r= 0.40, p< 0.046). There was no significant relationship observed between RTD FI% and ACCmax FI% nor between isokinetic PT FI% and ACCmax FI%. CONCLUSIONS: This investigation observed different patterns of response in maximal strength between isometric and isokinetic assessments following a isokinetic fatigue protocol. Additionally, the ability to rapidly generate strength and velocity had significantly different responses to fatigue between isometric and dynamic assessments. Due to these different responses, we recommend that assessments of fatigue at least include the same testing modality as the modality of the fatigue protocol.

Relationship between neuromuscular profile and total volume of resisted sprint training in male professional soccer players

PurposeThis 11-week study aimed to correlate the neuromuscular profile and the total volume of resisted sprint training (RST) under different velocity loss (VL) magnitudes in male professional soccer players.MethodsSeventeen soccer players (age 25.8 ± 4.3 years; height 180.0 ± 8.6 cm; weight 77.7 ± 9.7 kg) were randomly allocated into two training groups, who trained at distinct percentages of VL: 10% of VL (G10, n = 8) or 20% of VL (G20, n = 9). The velocity-based sled training consisted of 20 m resisted sprints executed with a progressive loading increase (45–65% of body-mass). Sprint times (10 m and 20 m), vertical jump height [countermovement jump (CMJ) and squat jump (SJ)], knee flexion and extension peak torque, as well as isometric rate of torque development, and lower limb lean mass were correlated with the total volume of RST performed by G10 and G20 groups.ResultsThe G10 performed 31% less repetitions and total RST distance than G20 (p = 0.002). Significant negative Pearson’s correlations (large-to-very large) were observed between total volume performed by G10 and CMJ height [r = − 0.85, confidence interval at 95% (95% CI) = − 0.98 to − 0.58, p = 0.02, Cohen’s D effect size (ES) = 0.41] as well as SJ height (r = − 0.90, 95% CI − 0.99 to − 0.66, p = 0.005, ES = 0.80), and knee extension concentric peak torque (r = − 0.69, 95% CI − 0.99 0.91, p = 0.05, ES = 0.03). No further correlation was found (p > 0.05).ConclusionsWhen lower magnitudes of VL were used during training sessions (10%), the stronger and more powerful players performed lower volume of RST. Interestingly, this relationship is not confirmed when higher magnitudes of VL (20%) are prescribed (greater fatigue incidence).

Explosive hamstrings strength asymmetry persists despite maximal hamstring strength recovery following anterior cruciate ligament reconstruction using hamstring tendon autografts

PurposeTo investigate the differences in maximal (isometric and concentric peak torque) and explosive (rate of torque development (RTD)) hamstring and quadriceps strength symmetry between males and females during early- and late-phase rehabilitation after anterior cruciate ligament reconstruction (ACLR) using hamstring tendon (HT) autografts and to determine the interaction of time and sex on maximal and explosive strength symmetry.MethodsA total of 38 female and 51 male participants were assessed during early (3–6 months post-operative) and late (7–12 months post-operative) phases of rehabilitation following ACLR. Maximal (concentric and isometric peak torque) and explosive (isometric RTD) hamstring and quadriceps strength were assessed and presented as limb symmetry index (LSI).ResultsMaximal concentric hamstrings asymmetry (Early: 86 ± 14; Late 92 ± 13; p = 0.005) as well as maximal concentric (Early, 73 ± 15; Late 91 ± 12; p < 0.001) and explosive (Early: 82 ± 30; Late: 92 ± 25; p = 0.03) quadriceps asymmetry decreased from early to late rehabilitation. However, there were no significant changes in maximal isometric quadriceps strength and explosive isometric hamstring strength in the same time period. Females had a larger asymmetry in maximal concentric (Females: 75 ± 17; Males: 81 ± 15; p = 0.001) and explosive (Females: 81 ± 32; Males: 89 ± 25; p = 0.01) quadriceps strength than males throughout rehabilitation. There were no sex differences in maximal and explosive hamstring strength. There were no sex by time interactions for any variables.ConclusionExplosive hamstring strength asymmetry did not improve despite recovery of maximal hamstring strength during rehabilitation following ACLR with HT autografts. While sex did not influence strength recovery, females had larger maximal and explosive quadriceps strength asymmetry compared to males throughout rehabilitation following ACLR.Level of evidenceLevel III

Effects of Moderate-to-Heavy Sled Training Using Different Magnitudes of Velocity Loss in Professional Soccer Players.

Grazioli, R, Loturco, I, Lopez, P, Setuain, I, Goulart, J, Veeck, F, Inácio, M, Izquierdo, M, Pinto, RS, and Cadore, EL. Effects of moderate-to-heavy sled training using different magnitudes of velocity loss in professional soccer players. J Strength Cond Res 37(3): 629-635, 2023-This study investigated the effects of a 11-week moderate-to-heavy sled training intervention with different magnitudes of velocity loss on sprint and jump performance, mechanical muscle function, and body composition in professional soccer players. Seventeen players (age 25.8 ± 4.3 years; height 180.0 ± 8.6 cm; mass 77.7 ± 9.7 kg) were randomly allocated into 2 groups, based on different magnitudes of velocity loss: 10% of velocity decrease (G10, n = 8) and 20% of velocity decrease (G20, n = 9). The velocity-based sled training consisted of 20-m resisted sprints with a progressive loading increase from 45 to 65% of body-mass throughout the intervention. Pre-intervention and postintervention sprint and jump performance, hamstring and quadriceps peak torque and isometric rate of torque development, and lower-limb lean mass measured by dual X-ray absorptiometry were assessed and compared. Two-way repeated measures analysis of variance revealed a significant time-effect for decreases in 10- and 20-m sprint times ( p = 0.018 and p = 0.033, respectively), but without a time-group interaction. The G10 showed greater beneficial effects than G20 for both 10-m (-5.5 ± 3.3%, magnitude-based inference [MBI]: possibly vs. -1.7 ± 5.9%, MBI: possibly trivial) and 20-m (-2.5 ± 2.1%, MBI: possibly vs. -1.4 ± 3.7%, MBI: likely trivial) sprint times. Moreover, there was a significant time effect for countermovement jump height and quadriceps isometric peak torque, which decreased significantly after training ( p = 0.019 and p = 0.010, respectively), with no within-group effect of time vs. group interaction for these respective outcomes. The novel velocity-based sled model proposed here, especially under lower magnitudes of velocity loss, was able to significantly improve linear sprint performance in professional soccer players.

The effect of rate of torque development on motor unit recruitment and firing rates during isometric voluntary trapezoidal contractions.

It is common practice to examine motor unit (MU) activity according to mean firing rate (MFR) and action potential amplitude (MUAPAMP) vs. recruitment threshold (RT) relationships during isometric trapezoidal contractions. However, it is unknown whether the rate of torque development during the linearly increasing torque phase affects the activity of MUs during such contractions. Sixteen healthy males and females performed two isometric trapezoidal muscle actions at 40% of maximum voluntary contraction (MVC), one at a rate of torque development of 5% MVC/s (SLOW40) and one at 20% MVC/s (FAST40) during the linearly increasing torque phase. Surface electromyography (EMG) was recorded from the vastus lateralis (VL) via a 5-pin surface array sensor and decomposed into action potential trains of individual MUs, yielding MFRs and MUAPAMP which were regressed against RT separately for each contraction. Surface EMG amplitude recorded from leg extensors and flexors was used to quantify muscle activation and coactivation. MFR vs. RT relationship slopes were more negative (P = 0.003) for the SLOW40 (- 0.491 ± 0.101 pps/%MVC) than FAST40 (- 0.322 ± 0.109 pps/%MVC) and the slopes of the MUAPAMP vs. RT relationships (P = 0.022, SLOW40 = 0.0057 ± 0.0021mV/%MVC, FAST40 = 0.0041 ± 0.0023mV/%MVC) and muscle activation of the extensors (P < 0.001, SLOW40 = 36.3 ± 7.82%, FAST40 = 34.0 ± 6.26%) were greater for SLOW40 than FAST40. MU firing rates were lower and action potential amplitudes were larger in relation to recruitment thresholds for a contraction performed at a slower rate compared to a faster rate of isometric torque development. Differences in MU activity can exist as a function of rate of torque development during commonly performed isometric trapezoidal contractions.

Interlimb Asymmetries Identified Using the Rate of Torque Development in Ballistic Contraction Targeting Submaximal Torques.

Evaluating the rate of torque development (RTD) in isometric ballistic contraction targeting submaximal torques is usually overlooked in the literature. In a series of isometric ballistic contractions targeting a range of submaximal torque values, there is a linear relationship between the peak torque and the peak RTD obtained in each contraction. RTD scaling factor (RTD-SF) represents the slope of this relationship. In this study, we investigated the prevalence of interlimb asymmetry in the RTD-SF and in the RTD calculated across submaximal torques. Furthermore, we compared these asymmetry indices with those calculated adopting more classical approaches, such as ballistic contraction targeting maximal torque and isokinetic concentric conditions. Quadriceps and hamstrings strength was evaluated in both limbs of elite under 17 and under 19 soccer players (20 males, 17 ± 1 years). Participants performed three concentric isokinetic contractions at 240°/s and a series of isometric ballistic contractions targeting from 20 to 100% of maximal isometric torque. The interlimb difference was calculated for each parameter and players presenting an interlimb difference >15% were identified. A total of 40% (for quadriceps) and 60% (for hamstring) of players showed an interlimb asymmetry in isometric RTD for at least 50% of submaximal torque range. The RTD-SF was able to identify more players with asymmetry than the classical isokinetic tests. However, isokinetic and isometric indices of asymmetry were in general poorly or not correlated with each other. Most players presented an interlimb asymmetry in RTD for a wide part of the torque range and the adopted protocol was able to highlight important interindividual differences. Furthermore, players showed a large prevalence of RTD-SF asymmetry in both quadriceps and hamstrings. It is still to be determined if these asymmetries are functionally relevant. Nevertheless, the adopted protocol provided meaningful information for identifying interlimb asymmetries that could not be gathered when adopting the classical method of ballistic contractions targeting only maximal torques.

Assessment of isometric muscle strength and rate of torque development with hand-held dynamometry: Test-retest reliability and relationship with gait velocity after stroke

Isometric rate of torque development examines how quickly force can be exerted and may resemble everyday task demands more closely than isometric strength. Rate of torque development may provide further insight into the relationship between muscle function and gait following stroke. Aims of this study were to examine the test-retest reliability of hand-held dynamometry to measure isometric rate of torque development following stroke, to examine associations between strength and rate of torque development, and to compare the relationships of strength and rate of torque development to gait velocity. Sixty-three post-stroke adults participated (60 years, 34 male). Gait velocity was assessed using the fast-paced 10 m walk test. Isometric strength and rate of torque development of seven lower-limb muscle groups were assessed with hand-held dynamometry. Intraclass correlation coefficients were calculated for reliability and Spearman’s rho correlations were calculated for associations. Regression analyses using partial F-tests were used to compare strength and rate of torque development in their relationship with gait velocity. Good to excellent reliability was shown for strength and rate of torque development (0.82–0.97). Strong associations were found between strength and rate of torque development (0.71–0.94). Despite high correlations between strength and rate of torque development, rate of torque development failed to provide significant value to regression models that already contained strength. Assessment of isometric rate of torque development with hand-held dynamometry is reliable following stroke, however isometric strength demonstrated greater relationships with gait velocity. Further research should examine the relationship between dynamic measures of muscle strength/torque and gait after stroke.

Plyometric Exercises from a Knee Anterior Cruciate Ligament Prevention Program on the Rate of Isometric Torque Development and Vertical Jump Height

Purpose: Plyometric exercises are incorporated in anterior cruciate ligament injures of the knee (ACL) injury prevention programs that have effectively decreased risk factors for anterior cruciate ligament injures of the knee injuries, but the impact on the rate of isometric torque development of the musculature of the knee is unclear. The purpose of this study was to determine the effects of a 6-week plyometric program pulled from a commonly utilized anterior cruciate ligament injures of the knee injury prevention program on rate of isometric torque development (RTD) in healthy active females. Methods: College-aged participants were randomly split into two different groups (16-plyometric training and 15-control). Plyometric exercises included 180° jumps, bounding for distance, bounding in place, broad jump-stick, cone jumps, hop - hop stick, jump into bounding, jump - jump - jump vertical jump, mattress jumps, scissors jump, single-legged jumps for distance, squat jumps, step-jump up-down-vertical jump, tuck jumps, and wall jumps. Participants in the training group performed the exercises three times a week on alternating days, for 30-minute sessions. All participants performed a vertical jump measurement and completed maximum voluntary isometric contractions (MVICs) of ankle plantar flexion, knee extension, and knee flexion rate of torque development. Results: There was a main effect of session for plantar flexion rate of torque development time windows and vertical jump. The analysis revealed no significant differences for group by session interactions for any other rate of torque development measurement or the vertical jump. Conclusions: Plyometric exercises utilized from an anterior cruciate ligament injures of the knee injury prevention program did not change lower body isometric torque development or vertical jump height of active females. Since the plyometric training did not improve vertical jump, the training may not have been performed vigorous enough for the participants to cause a neuromuscular adaptation. Based on findings, 6-weeks of plyometric training from an isolated ACL injury prevention program should not be used to increase the vertical jump of healthy, active females.

Knee Extensor Strength is Associated with Femoral Cartilage Thickness in Individuals with ACL Reconstruction

PURPOSE: To (1) determine the relationship between quadriceps function and femoral cartilage morphology in individuals with anterior cruciate ligament reconstruction (ACLR), and (2) compare quadriceps function and femoral cartilage morphology between injured and uninjured limbs. METHODS: Quadriceps function and femoral cartilage was assessed with unilateral ACLR in 20 subjects (women=15, age= 22.3±3.3years, time since ACLR=44.9±32.8 months). Quadriceps function was assessed using peak isometric knee extension torque (PT) and rate of torque development (RTD) at 45 degrees of knee flexion, and peak isokinetic knee extensor torque at 60, 180 and 240°/sec. Femoral cartilage morphology (area and thickness) were obtained via ultrasound imaging at 140° of knee flexion. Partial correlations were used to evaluate the associations between indices of quadriceps function, and cartilage area and thickness accounting for time since reconstruction. Paired samples t-test were used to evaluate interlimb differences. RESULTS: The ACLR limb produced smaller isometric peak torque (2.56±0.42 vs. 2.75±0.30 Nm/kg, p=0.04), slower isometric rate of torque development (38.12±13.27 vs. 47.81±17.99 Nm/sec/kg, p=0.03), and isokinetic peak knee extensor torque at 60°/sec (2.38±0.54 vs. 2.80±0.63 Nm/kg, p≤0.01) compared to the uninjured limb. No differences were found in isokinetic peak torque at 180 or 240°/sec (p=0.06 and 0.60, respectively). After accounting for time since ACLR, a positive association was found between isometric peak torque and medial femoral cartilage thickness (r=0.41, p=0.04). CONCLUSIONS: The ACLR limb demonstrated deficits in quadriceps function. We found a moderate association between isometric peak torque and medial femoral cartilage thickness. Our results suggest that restoring quadriceps strength may delay femoral cartilage thinning following ACLR.

Neural, biomechanical, and physiological factors involved in sex-related differences in the maximal rate of isometric torque development

ObjectiveRecent research has reported that lower maximal rate of torque development (dτ/dtmax) exhibited by females, relative to males, during knee extension can be accounted for by normalization to a maximal voluntary contraction (MVC); however, this was not seen in the upper limb.PurposeThe aim of the current work was to examine the contribution of maximum strength (τmax), twitch contraction time (CT), muscle fiber condition velocity (MFCV), and rate of muscle activation (Q30) to sex-differences in the dτ/dtmax during maximal isometric dorsiflexion.MethodsThirty-eight participants (20 males; 18 females) performed both maximal voluntary and evoked isometric contractions of the tibialis anterior across 3 days. Ten maximal compound muscle action potentials were elicited and subsequently followed by three, 5-s contractions. From the recordings, MFCV, dτ/dtmax, τmax, CT, electromechanical delay (EMD), root-mean squared (RMS) amplitude, peak-to-peak voltage (Vpp), and Q30 were calculated.ResultsAn ANCOVA showed that τmax accounted for all the sex-differences in dτ/dtmax (p = 0.96). There were no significant differences between groups with respect to MFCV, RMS amplitude, Vpp amplitude, or CT. However, there was a significant sex-difference in dτ/dtmax, τmax, and Q30. Females had longer evoked EMD times compared with males (15.69 ± 10.57 ms versus 9.95 ± 3.46 ms; p = 0.01), but the voluntary EMD times were not different.ConclusionThe current research supports the work by Hannah et al. Exp Physiol 97:618–629, (2012) that normalization to MVC in the quadriceps is able to account for all sex-differences in rate of toque development in the lower limb.

Sex-related differences in maximal rate of isometric torque development

Sex-differences in the maximum rate of torque development (dτ/dtmax) may be due to differences in maximum muscle strength, because higher torque values mathematically lead to higher values for the rate of change in torque. The rate of change in the isometric torque-time curve is often normalized to the isometric maximum voluntary contraction (MVC) to evaluate males and females on a relative scale. Normalization eliminates sex-differences in dτ/dtmax in the lower limbs because males and females are more comparable (i.e., differences between the sexes are relatively small) with respect to both muscle size and strength. However, normalization fails to result in parody in dτ/dtmax of the upper limb, leading to the idea that other factors may be involved. This study determined if sex-differences in dτ/dtmax in the upper limb can be attributed to differences in isometric MVC and/or a neural variable related to rate of increase in muscle activation (Q30). Forty-six participants (23 males, 23 females) performed maximal isometric elbow flexion contractions, “as hard and as fast as possible”. Maximum torque (τmax), dτ/dtmax, and the rate of increase in surface electromyographic (sEMG) activity (Q30) were assessed. Muscle plus bone cross-sectional area (M+B CSA) of the upper arm was calculated to estimate differences in muscle size, only for comparative purposes. Maximum strength (55.5%) and muscle size (41.9%) of the elbow flexors in males were much greater than that of females (p<0.05). There was a large difference (61.2%) between males and females with respect to dτ/dtmax that was reduced by statistical correction using an analysis of covariance (ANCOVA). The percent differences were reduced to 36.7% (p<0.05) for τmax and 54.4% (p<0.05) for Q30, but was nearly eliminated to 13.8% (p>0.05) when both variables were used simultaneously as covariates. Since sex-differences in the upper limb dτ/dtmax persist, additional neural or biomechanical factors may be involved.

Single-joint isometric rate of torque development is not related to counter- movement jump performance in soccer players

BACKGROUND AND OBJECTIVE: The quadriceps rate of torque development (RTD) is frequently used to evaluate explosive performance, but its functional meaning has been questioned. Thus, the aim of this study was to investigate if isometric quadriceps RTD correlates with multi-joint dynamic performance and if it has greater correlation with dynamic performance than with a single-joint isokinetic test in soccer players. METHODS: Thirty-nine male soccer players (age 21 ± 5 years, body mass 75 ± 7.5 kg, height 179 ± 5 cm) performed five maximal concentric knee extension isokinetic contractions at a velocity of 180 ◦ /s, followed by three maximal voluntary isometric contractions (MVIC) with knee angle of 60 ◦ , and five countermovement jumps (CMJ). The RTD was derived from MIVC over various time intervals (of 0.05, 0.1, 0.2, 0.3 seconds, and peak RTD) and CMJ height was calculated by flight time method. Pearson Product Moment Correlations were used to determine the relationships between variables. RESULTS: Absolute and relative isokinetic PT correlated positively with CMJ height ( p 0.05, r from �0.272 to 0.296). CONCLUSION:These results indicate that single-joint isometric RTDdoes not correlate withdynamic multi-joint performance. Thus, more specific tests in relation to contraction type, velocity and/or movement pattern should be used.

Peak power is reduced following lengthening contractions despite a maintenance of shortening velocity

Following repetitive lengthening contractions, power (the product of torque and velocity) is impaired during shortening contractions. However, the relative contribution of each component to power loss and the underlying factors are unclear. We investigated neuromuscular properties of the dorsiflexors in 8 males (27 ± 3 years) and 8 females (26 ± 4 years) for a potential sex-related difference before, during, and after 150 unaccustomed maximal lengthening actions. Velocity-dependent power was determined from shortening contractions at 8 levels (1 N · m to 70% of maximum voluntary isometric contraction (MVC)) before, after, and throughout recovery assessed at 0-30 min, 24 h, and 48 h. Immediately following task termination, both sexes displayed similar impairments of 30%, 4%, and 10% in MVC torque, shortening velocity, and overall peak power, respectively (P < 0.05). Peak rate of isometric torque development (RTD) was reduced by 10% in males, but females exhibited a 35% reduction (P < 0.05). Rate of torque development for the MVC remained depressed in both sexes throughout the 30 min recovery period; however, the RTD returned to normal by 24 h in males but did not recover by 48 h in females. Power was reduced preferentially at higher loads (i.e., 60% MVC), with a greater loss in females (65%) than males (45%). For lower loads (<20% MVC), power was impaired minimally (4%-8%; P < 0.05) and recovered within 30 min in both groups. The reduction in maximal angular velocity persisted until 30 min of recovery, and peak power did not recover until 24 h for both sexes. Unaccustomed lengthening contractions decreased power preferentially at higher loads, whereas peak power was reduced minimally owing to maintenance of maximal shortening velocity.

Relationship of Isometric Peak Torque and Rate of Torque Development to Single Leg Hop Performance

The use of isometric strength testing via portable fixed dynamometry (PFD) has increased in the field of sports medicine and while found to be reliable, little is known of its association to functional performance. PURPOSE: To assess the association of isometric peak torque (PT) and rate of torque development (RTD) to a single leg hop for distance (SLHD) task. METHODS: 36 NCAA Division I female soccer athletes (19.4±1 years, 166.4±5.1 cm, and 62.1± 5.3 kg) were recruited. Subject participation was required for one session. Subjects performed 3 trials of a SLHD task followed by an isometric knee flexor (KF) and extensor (KE) strength assessment. Subjects performed 3 max isometric contractions, 5 s in duration, separated by a 60 s rest period. Measures of interest were: single leg hop (SLH) distance [cm], SLH work performed in joules (work = subject weight [N] × distance hopped [m]), isometric PT [Nm], normalized isometric PT (%T = PT [Nm]/(weight [N] × height [m]), and isometric RTD [Nm/s] at 4 time intervals (0-30, 0-50, 0-100, and 0-200 ms). Isometric data were collected with a PFD sampled at 1000Hz and filtered using a low pass 4th order Butterworth filter with a cut-off frequency of 50Hz. Separate Pearson's Product-Moment Correlations were performed and the coefficients of determination calculated. The scale set forth by Hopkins (2002) was used to interpret the correlation coefficients: trivial (0.0), small (0.1), moderate (0.3), strong (0.5), very strong (0.7), nearly perfect (0.9), and perfect (1.0). RESULTS: All isometric PT and %T measures displayed a trivial to small positive (r =.01 to.24) correlation to SLH distance and work performed, except for KF %T that displayed a trivial inverse relationship (r = -.01) to SLH work. RTD to SLH distance displayed a small inverse relationship (r = -.15 to -.17), while RTD to SLH work performed displayed a trivial to small positive correlation (r =.07 to.14). The shared variance for isometric PT, %T, and RTD to SLH distance and work performed ranged from 0 to 6%. CONCLUSION: These findings suggest that isometric PT, %T, or RTD assessed at the KFs and KEs are not indicative of SLH distance or work performed. This may underscore the need to assess the muscular function of the lower limb not only in isolation (i.e. single joint measures), but also in a more functional and integrated multi-joint manner.

Muscle Stiffness and Rate of Torque Development during Sprint Cycling

Crank torque (CT) application and rate of CT development (RCTD) are important considerations in sprint cycling. The stiffness of the musculotendinous unit is related to the isometric rate of torque development (RTD); however, this relationship has yet to be examined in sprint cycling. Maximal isometric torque (MIT) and isometric RTD of the quadriceps were assessed in 21 trained male cyclists (28.7 +/- 9.5 yr, 1.74 +/- 0.08 m, and 67.5 +/- 7.2 kg). Unilateral musculoarticular (MA) stiffness of the quadriceps was quantified using an oscillation test. Further, the participants performed a maximal 6-s sprint to assess peak power output (POpeak), peak CT (CTpeak), peak RCTD (RCTDpeak), and the crank angles associated with CTpeak and RCTDpeak. Participants were ranked on MA stiffness properties and were divided into a relatively stiff group (SG) and a relatively compliant group (CG). The SG displayed a significantly higher MA stiffness than the CG (P < 0.05). Furthermore, the SG reported significantly elevated MIT (27%), RTD (26%), and RCTDpeak (16%) when compared with the CG (P < 0.05), along with trends for increased POpeak (7%) and CTpeak (8%). The angles at CTpeak and RCTDpeak were 7% and 12% lower for the SG, respectively (P < 0.05). MA stiffness was significantly correlated with RCTDpeak, MIT, RTD, and POpeak. Higher stiffness is related to superior RCTDpeak in trained cyclists during a single sprint. A significant proportion of the variance in RCTDpeak was attributed to MA stiffness (37%), which was of greater magnitude than the relationship between RCTDpeak and MIT. Furthermore, the lower CTpeak angle and RCTDpeak angle may contribute to a more rapid development of CT. Accordingly, MA stiffness seems to be an important consideration for sprint cycling.

Postactivation potentiation in a human muscle: effect on the rate of torque development of tetanic and voluntary isometric contractions

Postactivation potentiation (PAP), a mechanism by which the torque of a muscle twitch is increased following a conditioning contraction, is well documented in muscular physiology, but little is known about its effect on the maximal rate of torque development and functional significance during voluntary movements. The objective of this study was to investigate the PAP effect on the rate of isometric torque development of electrically induced and voluntary contractions. To that purpose, the electromechanical responses of the thumb adductor muscles to a single electrical stimulus (twitch), a train of 15 pulses at 250 Hz (HFT(250)), and during ballistic (i.e., rapid torque development) voluntary contractions at torque levels ranging from 10 to 75% of maximal voluntary contraction (MVC) were recorded before and after a conditioning 6-s MVC. The results showed that the rate of torque development was significantly (P < 0.001) increased after the conditioning MVC, but the effect was greater for the twitch ( approximately 200%) compared with the HFT(250) ( approximately 17%) or ballistic contractions (range: 9-24%). Although twitch potentiation was maximal immediately after the conditioning MVC, maximal potentiation for HFT(250) and ballistic contractions was delayed to 1 min after the 6-s MVC. Furthermore, the similar degree of potentiation for the rate of isometric torque development between tetanic and voluntary ballistic contractions indicates that PAP is not related to the modality of muscle activation. These observations suggest that PAP may be considered as a mechanism that can influence our contractions during daily tasks and can be utilized to improve muscle performance in explosive sports.

THE INFLUENCE OF LATERALITY OF BRAIN LESION ON RECOVERY OF MUSCLE FUNCTION AFTER STROKE

Purpose/Hypothesis: Literature has shown that people with chronic stroke can continually improve their muscle function. The ankle muscles are commonly used to demonstrate functional recovery of muscle after stroke. Previous studies have indicated that the laterality of brain lesion may affect stroke recovery. No study has, however, specifically examined the influence of laterality of brain lesion on the recovery of muscle function at the ankle. The purpose of this study was to determine how the laterality of brain lesion affects the relationship between muscle function at the ankle and time post-stroke. Number of Subjects: This study examined fifteen individuals with unilateral stroke (7 right and 8 left strokes). Subjects ranged between 6 months and 7 years post-stroke. Materials/Methods: Rate of isometric torque development (RITD) at the affected ankle muscles was assessed using an isokinetic dynamometer. Pearson correlation coefficients were used for data analysis. Results: Significant positive correlations were found between time post-stroke and RITDs of both dorsi (r = .840, p < 0.01) and plantar flexors (r = .644, p < 0.05) in people with left stroke. No significant correlation was found in people with right stroke. Conclusions: Rate of isometric torque development at the affected ankle muscles increases over time in people with left brain lesion, but not with right brain lesion. The laterality of brain lesion may affect recovery of muscle function at the ankle in people with chronic stroke. Clinical Relevance: The laterality of brain lesion may be an important predictor for outcome of muscle function in stroke rehabilitation.